summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--host/docs/sync.rst55
-rw-r--r--host/lib/convert/gen_convert_general.py4
-rw-r--r--host/lib/usrp/dboard/db_sbx_common.cpp88
-rw-r--r--host/lib/usrp/dboard/db_sbx_common.hpp8
-rw-r--r--host/lib/usrp/dboard/db_sbx_version4.cpp4
-rw-r--r--host/lib/usrp/dboard/db_wbx_version3.cpp53
-rw-r--r--host/lib/utils/thread_priority.cpp4
7 files changed, 109 insertions, 107 deletions
diff --git a/host/docs/sync.rst b/host/docs/sync.rst
index fb9f7a1df..55c9f81f0 100644
--- a/host/docs/sync.rst
+++ b/host/docs/sync.rst
@@ -16,49 +16,48 @@ Common reference signals
------------------------------------------------------------------------
USRPs take two reference signals in order to synchronize clocks and time:
-* A 10MHz reference to provide a single frequency reference for both devices, and
+* A 10MHz reference to provide a single frequency reference for both devices.
* A pulse-per-second (1PPS) to synchronize the sample time across devices.
+* Or, the MIMO cable transmits an encoded time message from one device to another.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Provide reference signals
+PPS and 10 MHz reference signals
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-USRPs have two primary means of providing synchronization:
-
-**Method 1:**
Connect the front panel SMA connectors to the reference sources.
Typically, these signals are provided by an external GPSDO.
However, some USRP models can provide these signals from an optional internal GPSDO.
-**Method 2:**
-Use the MIMO Expansion cable to share reference sources (USRP2 and N-Series).
-The MIMO cable can be used synchronize one device to another device.
-Users of the MIMO cable may use method 1 to synchronize multiple pairs of devices.
+::
+
+ usrp->set_clock_source("external");
+ usrp->set_time_source("external");
**Note:**
+Sometimes the delay on the PPS signal will cause it to arrive inside the timing
+margin the FPGA sampling clock, causing PPS edges to be separated by less or
+more than 100 million cycles of the FPGA clock. If this is the case,
+you can change the edge reference of the PPS signal with this special parameter:
+
+::
+
+ usrp->set_time_source("_external_");
+
+**Note2:**
For users generating their own signals for the external SMA connectors,
the pulse-per-second should be clocked from the 10MHz reference.
See the application notes for your device for specific signal requirements.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-Set the clock configuration
+MIMO cable reference signals
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-In order to synchronize to an external clock,
-configure the USRP device using the "external" clock configuration:
-
-::
-
- usrp->set_clock_config(uhd::clock_config_t::external());
-
-Sometimes the delay on the PPS signal will cause it to arrive inside the timing
-margin the FPGA sampling clock, causing PPS edges to be separated by less or
-more than 100million cycles of the FPGA clock. If this is the case,
-you can change the edge reference of the PPS clock with the clock_config_t:
+Use the MIMO expansion cable to share reference sources (USRP2 and N-Series).
+The MIMO cable can be used synchronize one device to another device.
+Users of the MIMO cable may use method 1 to synchronize multiple pairs of devices.
::
- uhd::clock_config_t clock_config = uhd::clock_config_t::external();
- clock_config.pps_polarity = uhd::clock_config_t::PPS_NEG;
- usrp->set_clock_config(clock_config);
+ usrp->set_clock_source("mimo");
+ usrp->set_time_source("mimo");
------------------------------------------------------------------------
Synchronizing the device time
@@ -141,7 +140,7 @@ For receive, a burst is started when the user issues a stream command. This stre
stream_cmd.time_spec = time_to_recv;
usrp->issue_stream_cmd(stream_cmd);
-For transmit, a burst is started when the user calls send(). The metadata should have a time spec and start of burst set:
+For transmit, a burst is started when the user calls send(). The metadata should have a time spec set:
::
uhd::tx_metadata_t md;
@@ -151,11 +150,7 @@ For transmit, a burst is started when the user calls send(). The metadata should
md.time_spec = time_to_send;
//send a single packet
- size_t num_tx_samps = usrp->get_device()->send(
- buffs, samps_to_send, md,
- uhd::io_type_t::COMPLEX_FLOAT32,
- uhd::device::SEND_MODE_ONE_PACKET, timeout
- );
+ size_t num_tx_samps = tx_streamer->send(buffs, samps_to_send, md);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Align LOs in the front-end
diff --git a/host/lib/convert/gen_convert_general.py b/host/lib/convert/gen_convert_general.py
index 24729d0d5..364c4bd1a 100644
--- a/host/lib/convert/gen_convert_general.py
+++ b/host/lib/convert/gen_convert_general.py
@@ -119,8 +119,8 @@ DECLARE_CONVERTER($(cpu_type), $(width), sc16_item16_usrp1, 1, PRIORITY_GENERAL)
for (size_t i = 0, j = 0; i < nsamps; i++){
#for $w in range($width)
- output[j++] = $(to_wire)(boost::int16_t(input$(w)[i].real()$(do_scale)));
- output[j++] = $(to_wire)(boost::int16_t(input$(w)[i].imag()$(do_scale)));
+ output[j++] = $(to_wire)(boost::uint16_t(boost::int16_t(input$(w)[i].real()$(do_scale))));
+ output[j++] = $(to_wire)(boost::uint16_t(boost::int16_t(input$(w)[i].imag()$(do_scale))));
#end for
}
}
diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp
index d9a922896..d1cd5b373 100644
--- a/host/lib/usrp/dboard/db_sbx_common.cpp
+++ b/host/lib/usrp/dboard/db_sbx_common.cpp
@@ -219,34 +219,42 @@ void sbx_xcvr::update_atr(void){
int tx_ant_led = _tx_ant == "TX/RX" ? 0 : TX_LED_TXRX;
//setup the tx atr (this does not change with antenna)
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE,
- tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS);
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_IDLE, 0 | tx_lo_lpf_en \
+ | tx_ld_led | tx_ant_led | TX_POWER_UP | ANT_XX | TX_MIXER_DIS);
//setup the rx atr (this does not change with antenna)
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE,
- rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS);
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_IDLE, rx_pga0_iobits | rx_lo_lpf_en \
+ | rx_ld_led | rx_ant_led | RX_POWER_UP | ANT_XX | RX_MIXER_DIS);
//set the RX atr regs that change with antenna setting
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY,
- rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB |
- ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2));
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,
- rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS |
- ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX,
- rx_pga0_iobits | rx_lo_lpf_en | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB |
- ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_RX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
+ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \
+ | ((_rx_ant != "RX2")? ANT_TXRX : ANT_RX2));
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_TX_ONLY, rx_pga0_iobits | rx_lo_lpf_en \
+ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_DIS \
+ | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_FULL_DUPLEX, rx_pga0_iobits | rx_lo_lpf_en \
+ | rx_ld_led | rx_ant_led | RX_POWER_UP | RX_MIXER_ENB \
+ | ((_rx_ant == "CAL")? ANT_TXRX : ANT_RX2));
//set the TX atr regs that change with antenna setting
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY,
- tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS |
- ((_rx_ant != "RX2")? ANT_RX : ANT_TX));
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,
- tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB |
- ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
- this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX,
- tx_pga0_iobits | tx_lo_lpf_en | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB |
- ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_RX_ONLY, 0 | tx_lo_lpf_en \
+ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_DIS \
+ | ((_rx_ant != "RX2")? ANT_RX : ANT_TX));
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_TX_ONLY, tx_pga0_iobits | tx_lo_lpf_en \
+ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \
+ | ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
+ this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_FULL_DUPLEX, tx_pga0_iobits | tx_lo_lpf_en \
+ | tx_ld_led | tx_ant_led | TX_POWER_UP | TX_MIXER_ENB \
+ | ((_tx_ant == "CAL")? ANT_RX : ANT_TX));
}
void sbx_xcvr::set_rx_ant(const std::string &ant){
@@ -281,6 +289,7 @@ double sbx_xcvr::set_lo_freq(dboard_iface::unit_t unit, double target_freq) {
return actual;
}
+
sensor_value_t sbx_xcvr::get_locked(dboard_iface::unit_t unit) {
const bool locked = (this->get_iface()->read_gpio(unit) & LOCKDET_MASK) != 0;
return sensor_value_t("LO", locked, "locked", "unlocked");
@@ -294,31 +303,18 @@ void sbx_xcvr::flash_leds(void) {
this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|RX_LED_IO));
this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO));
- /*
- //flash All LEDs
- for (int i = 0; i < 3; i++) {
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_IO, RX_LED_IO);
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_IO, TX_LED_IO);
-
- boost::this_thread::sleep(boost::posix_time::milliseconds(100));
-
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO);
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO);
-
- boost::this_thread::sleep(boost::posix_time::milliseconds(100));
- }
- */
-
this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_LD, TX_LED_IO);
boost::this_thread::sleep(boost::posix_time::milliseconds(100));
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_TXRX|TX_LED_LD, TX_LED_IO);
+ this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, \
+ TX_LED_TXRX|TX_LED_LD, TX_LED_IO);
boost::this_thread::sleep(boost::posix_time::milliseconds(100));
this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO);
boost::this_thread::sleep(boost::posix_time::milliseconds(100));
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_RX1RX2|RX_LED_LD, RX_LED_IO);
+ this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, \
+ RX_LED_RX1RX2|RX_LED_LD, RX_LED_IO);
boost::this_thread::sleep(boost::posix_time::milliseconds(100));
this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_LD, RX_LED_IO);
@@ -333,20 +329,6 @@ void sbx_xcvr::flash_leds(void) {
this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO);
boost::this_thread::sleep(boost::posix_time::milliseconds(100));
- /*
- //flash All LEDs
- for (int i = 0; i < 3; i++) {
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, 0, RX_LED_IO);
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, 0, TX_LED_IO);
-
- boost::this_thread::sleep(boost::posix_time::milliseconds(100));
-
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_RX, RX_LED_IO, RX_LED_IO);
- this->get_iface()->set_gpio_out(dboard_iface::UNIT_TX, TX_LED_IO, TX_LED_IO);
-
- boost::this_thread::sleep(boost::posix_time::milliseconds(100));
- }
- */
//Put LED gpios back in ATR control and update atr
this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO));
this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO));
diff --git a/host/lib/usrp/dboard/db_sbx_common.hpp b/host/lib/usrp/dboard/db_sbx_common.hpp
index 2f3939f2b..6380ddb47 100644
--- a/host/lib/usrp/dboard/db_sbx_common.hpp
+++ b/host/lib/usrp/dboard/db_sbx_common.hpp
@@ -25,7 +25,7 @@
#define LOCKDET_MASK (1 << 0) // INPUT!!!
// TX IO Pins
-#define TRSW (1 << 14) // 0 = TX, 1 = RX
+#define TRSW (1 << 14) // 0 = TX, 1 = RX
#define TX_LED_TXRX (1 << 7) // LED for TX Antenna Selection TX/RX
#define TX_LED_LD (1 << 6) // LED for TX Lock Detect
#define DIS_POWER_TX (1 << 5) // on UNIT_TX, 0 powers up TX
@@ -43,15 +43,15 @@
#define RX_ATTN_MASK (63 << RX_ATTN_SHIFT) // valid bits of RX Attenuator Control
// TX Attenuator Pins
-#define TX_ATTN_SHIFT 8 // lsb of RX Attenuator Control
-#define TX_ATTN_MASK (63 << TX_ATTN_SHIFT) // valid bits of RX Attenuator Control
+#define TX_ATTN_SHIFT 8 // lsb of TX Attenuator Control
+#define TX_ATTN_MASK (63 << TX_ATTN_SHIFT) // valid bits of TX Attenuator Control
// Mixer functions
#define TX_MIXER_ENB (SYNTH_PDBRF|TX_ENABLE)
#define TX_MIXER_DIS 0
#define RX_MIXER_ENB (SYNTH_PDBRF)
-#define RX_MIXER_DIS 0
+#define RX_MIXER_DIS RX_DISABLE
// Pin functions
#define TX_LED_IO (TX_LED_TXRX|TX_LED_LD) // LED gpio lines, pull down for LED
diff --git a/host/lib/usrp/dboard/db_sbx_version4.cpp b/host/lib/usrp/dboard/db_sbx_version4.cpp
index d22e83b51..c8128d5f4 100644
--- a/host/lib/usrp/dboard/db_sbx_version4.cpp
+++ b/host/lib/usrp/dboard/db_sbx_version4.cpp
@@ -62,8 +62,8 @@ double sbx_xcvr::sbx_version4::set_lo_freq(dboard_iface::unit_t unit, double tar
(4, adf4351_regs_t::RF_DIVIDER_SELECT_DIV4)
(8, adf4351_regs_t::RF_DIVIDER_SELECT_DIV8)
(16, adf4351_regs_t::RF_DIVIDER_SELECT_DIV16)
- (32, adf4351_regs_t::RF_DIVIDER_SELECT_DIV16)
- (64, adf4351_regs_t::RF_DIVIDER_SELECT_DIV16)
+ (32, adf4351_regs_t::RF_DIVIDER_SELECT_DIV32)
+ (64, adf4351_regs_t::RF_DIVIDER_SELECT_DIV64)
;
double actual_freq, pfd_freq;
diff --git a/host/lib/usrp/dboard/db_wbx_version3.cpp b/host/lib/usrp/dboard/db_wbx_version3.cpp
index 2cca8e4f9..7ef47edd4 100644
--- a/host/lib/usrp/dboard/db_wbx_version3.cpp
+++ b/host/lib/usrp/dboard/db_wbx_version3.cpp
@@ -114,22 +114,43 @@ wbx_base::wbx_version3::wbx_version3(wbx_base *_self_wbx_base) {
int v3_tx_mod = ADF4350_PDBRF;
//set the gpio directions and atr controls
- self_base->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, v3_tx_mod|v3_iobits);
- self_base->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, RXBB_PDB|ADF4350_PDBRF);
- self_base->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, TX_PUP_5V|TX_PUP_3V|v3_tx_mod|v3_iobits);
- self_base->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, RX_PUP_5V|RX_PUP_3V|ADF4350_CE|RXBB_PDB|ADF4350_PDBRF|RX_ATTN_MASK);
-
- //setup ATR for the mixer enables (always enabled to prevent phase slip between bursts)
- //set TX gain iobits to min gain (max attenuation) when RX_ONLY or IDLE to suppress LO leakage
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE, v3_tx_mod, TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY, v3_tx_mod, TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY, v3_tx_mod, TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, v3_tx_mod, TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
-
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
- self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+ self_base->get_iface()->set_pin_ctrl(dboard_iface::UNIT_TX, \
+ v3_tx_mod|v3_iobits);
+ self_base->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, \
+ RXBB_PDB|ADF4350_PDBRF);
+ self_base->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, \
+ TX_PUP_5V|TX_PUP_3V|v3_tx_mod|v3_iobits);
+ self_base->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, \
+ RX_PUP_5V|RX_PUP_3V|ADF4350_CE|RXBB_PDB|ADF4350_PDBRF|RX_ATTN_MASK);
+
+ //setup ATR for the mixer enables (always enabled to prevent phase
+ //slip between bursts). set TX gain iobits to min gain (max attenuation)
+ //when RX_ONLY or IDLE to suppress LO leakage
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_IDLE, v3_tx_mod, \
+ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_RX_ONLY, v3_tx_mod, \
+ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_TX_ONLY, v3_tx_mod, \
+ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, \
+ dboard_iface::ATR_REG_FULL_DUPLEX, v3_tx_mod, \
+ TX_ATTN_MASK | TX_MIXER_DIS | v3_tx_mod);
+
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_IDLE, \
+ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_TX_ONLY, \
+ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_RX_ONLY, \
+ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
+ self_base->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, \
+ dboard_iface::ATR_REG_FULL_DUPLEX, \
+ RX_MIXER_ENB, RX_MIXER_DIS | RX_MIXER_ENB);
}
wbx_base::wbx_version3::~wbx_version3(void){
diff --git a/host/lib/utils/thread_priority.cpp b/host/lib/utils/thread_priority.cpp
index 699c5168a..7c3faa37a 100644
--- a/host/lib/utils/thread_priority.cpp
+++ b/host/lib/utils/thread_priority.cpp
@@ -77,10 +77,14 @@ static void check_priority_range(float priority){
void uhd::set_thread_priority(float priority, bool realtime){
check_priority_range(priority);
+ /*
+ * Process wide priority is no longer set.
+ * This is the responsibility of the application.
//set the priority class on the process
int pri_class = (realtime)? REALTIME_PRIORITY_CLASS : NORMAL_PRIORITY_CLASS;
if (SetPriorityClass(GetCurrentProcess(), pri_class) == 0)
throw uhd::os_error("error in SetPriorityClass");
+ */
//scale the priority value to the constants
int priorities[] = {
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 05:27:36 +0000