diff options
49 files changed, 1554 insertions, 871 deletions
diff --git a/host/AUTHORS b/host/AUTHORS index e0775f3a1..512d4752e 100644 --- a/host/AUTHORS +++ b/host/AUTHORS @@ -24,6 +24,7 @@ Tom Tsou - ttsou@vt.edu USRP1 host code USRP1 firmware -Nick Foster - nick@nerdnetworks.org +Nick Foster - nick@ettus.com LIBUSB host code USRP1 host code + TVRX host code diff --git a/host/README b/host/README index 5018ef541..cab1e0b10 100644 --- a/host/README +++ b/host/README @@ -6,7 +6,8 @@ The hardware driver for Ettus Research products. ######################################################################## # Supported USRP Motherboards ######################################################################## -USRP2 - udp over gigabit ethernet +USRP1 +USRP2 ######################################################################## # Supported USRP Daughterboards @@ -19,6 +20,7 @@ RFX Series XCVR 2450 WBX Series DBSRX +TVRX ######################################################################## # Documentation diff --git a/host/docs/CMakeLists.txt b/host/docs/CMakeLists.txt index bbb8812b0..65db3befc 100644 --- a/host/docs/CMakeLists.txt +++ b/host/docs/CMakeLists.txt @@ -25,6 +25,7 @@ SET(manual_sources dboards.rst general.rst images.rst + transport.rst usrp1.rst usrp2.rst ) diff --git a/host/docs/index.rst b/host/docs/index.rst index bd55edc0b..7f8129e2d 100644 --- a/host/docs/index.rst +++ b/host/docs/index.rst @@ -20,11 +20,12 @@ Building the UHD ^^^^^^^^^^^^^^^^^^^^^ Application Notes ^^^^^^^^^^^^^^^^^^^^^ -* `General App Notes <./general.html>`_ +* `General Application Notes <./general.html>`_ * `Firmware and FPGA Image Notes <./images.html>`_ -* `USRP1 App Notes <./usrp1.html>`_ -* `USRP2 App Notes <./usrp2.html>`_ -* `Daughterboard App Notes <./dboards.html>`_ +* `USRP1 Application Notes <./usrp1.html>`_ +* `USRP2 Application Notes <./usrp2.html>`_ +* `Daughterboard Application Notes <./dboards.html>`_ +* `Transport Application Notes <./transport.html>`_ ^^^^^^^^^^^^^^^^^^^^^ API Documentation diff --git a/host/docs/transport.rst b/host/docs/transport.rst new file mode 100644 index 000000000..432db4bb5 --- /dev/null +++ b/host/docs/transport.rst @@ -0,0 +1,88 @@ +======================================================================== +UHD - Transport Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Introduction +------------------------------------------------------------------------ +A transport is the layer between the packet interface and a device IO interface. +The advanced user can pass optional parameters +into the underlying transport layer through the device address. +These optional parameters control how the transport object allocates memory, +resizes kernel buffers, spawns threads, etc. +When not spcified, the transport layer will use values for these parameters +that are known to perform well on a variety of systems. +The transport parameters are defined below for the various transports in the UHD: + +------------------------------------------------------------------------ +UDP transport (ASIO) +------------------------------------------------------------------------ +The UDP transport is implemented with Boost's ASIO library. +ASIO provides an asynchronous API for user-space sockets. +The transport implementation allocates a number of buffers +and submits asynchronous requests for send and receive. +IO service threads run in the background to process these requests. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Transport parameters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The following parameters can be used to alter the transport's default behavior: + +* **recv_frame_size:** The size of a single receive buffer in bytes +* **num_recv_frames:** The number of receive buffers to allocate +* **send_frame_size:** The size of a single send buffer in bytes +* **num_send_frames:** The number of send buffers to allocate +* **concurrency_hint:** The number of threads to run the IO service + +**Note:** num_send_frames and concurrency_hint will not have an effect +as the asynchronous send implementation is currently disabled. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Resize socket buffers +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +It may be useful increase the size of the socket buffers to +move the burden of buffering samples into the kernel, or to +buffer incoming samples faster than they can be processed. +However, if your application cannot process samples fast enough, +no amount of buffering can save you. +The following parameters can be used to alter socket's buffer sizes: + +* **recv_buff_size:** The desired size of the receive buffer in bytes +* **send_buff_size:** The desired size of the send buffer in bytes + +**Note:** Large send buffers tend to decrease transmit performance. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Linux specific notes +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +On linux, the maximum buffer sizes are capped by the sysctl values +**net.core.rmem_max** and **net.core.wmem_max**. +To change the maximum values, run the following commands: +:: + + sudo sysctl -w net.core.rmem_max=<new value> + sudo sysctl -w net.core.wmem_max=<new value> + +Set the values permanently by editing */etc/sysctl.conf* + +------------------------------------------------------------------------ +USB transport (libusb) +------------------------------------------------------------------------ +The USB transport is implemented with libusb. +Libusb provides an asynchronous API for USB bulk transfers. +The transport implementation allocates a number of buffers +and submits asynchronous requests through libusb. +Event handler threads run in the background to process these requests. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Transport parameters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The following parameters can be used to alter the transport's default behavior: + +* **recv_frame_size:** The size of a single receive transfers in bytes +* **num_recv_frames:** The number of simultaneous receive transfers +* **send_frame_size:** The size of a single send transfers in bytes +* **num_send_frames:** The number of simultaneous send transfers +* **concurrency_hint:** The number of threads to run the event handler diff --git a/host/docs/usrp1.rst b/host/docs/usrp1.rst index 0baa93a45..3443fd871 100644 --- a/host/docs/usrp1.rst +++ b/host/docs/usrp1.rst @@ -60,29 +60,6 @@ Example device address string representations to specify non-standard firmware a fpga=usrp1_fpga_4rx.rbf, fw=usrp1_fw_custom.ihx -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Change USB transfer parameters -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The advanced user may manipulate parameters of the usb bulk transfers -for various reasons, such as lowering latency or increasing buffer size. -By default, the UHD will use values for these parameters -that are known to perform well on a variety of systems. -The following device address parameters can be used to manipulate USB bulk transfers: - -* **recv_xfer_size:** the size of each receive bulk transfer in bytes -* **recv_num_xfers:** the number of simultaneous receive bulk transfers -* **send_xfer_size:** the size of each send bulk transfer in bytes -* **send_num_xfers:** the number of simultaneous send bulk transfers - -Example usage, set the device address markup string to the following: -:: - - serial=12345678, recv_num_xfers=16 - - -- OR -- - - serial=12345678, recv_xfer_size=2048, recv_num_xfers=16 - ------------------------------------------------------------------------ Specifying the subdevice to use ------------------------------------------------------------------------ diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index 70e5ea28b..1ebab388a 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -166,47 +166,6 @@ The device address string representation for 2 USRP2s with IPv4 addresses 192.16 addr=192.168.10.2 192.168.20.2 ------------------------------------------------------------------------ -Resize the send and receive buffers ------------------------------------------------------------------------- -It may be useful increase the size of the socket buffers to -move the burden of buffering samples into the kernel, or to -buffer incoming samples faster than they can be processed. -However, if you application cannot process samples fast enough, -no amount of buffering can save you. - -By default, the UHD will try to resize both the send and receive buffer for optimum performance. -A warning will be printed on instantiation if the actual buffer size is insufficient. -See the OS specific notes below: - -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -OS specific notes -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -On linux, the maximum buffer sizes are capped by the sysctl values -**net.core.rmem_max** and **net.core.wmem_max**. -To change the maximum values, run the following commands: -:: - - sudo sysctl -w net.core.rmem_max=<new value> - sudo sysctl -w net.core.wmem_max=<new value> - -Set the values permanently by editing */etc/sysctl.conf* - -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Device address params -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -To manually set the size of the buffers, -the usrp2 will accept two optional parameters in the device address. -Each parameter will accept a numeric value for the number of bytes. - -* recv_buff_size -* send_buff_size - -Example usage, set the device address markup string to the following: -:: - - addr=192.168.10.2, recv_buff_size=100e6 - ------------------------------------------------------------------------- Hardware setup notes ------------------------------------------------------------------------ diff --git a/host/examples/tx_timed_samples.cpp b/host/examples/tx_timed_samples.cpp index f34c121d5..863446682 100644 --- a/host/examples/tx_timed_samples.cpp +++ b/host/examples/tx_timed_samples.cpp @@ -95,8 +95,11 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ size_t num_tx_samps = dev->send( &buff.front(), samps_to_send, md, uhd::io_type_t::COMPLEX_FLOAT32, - uhd::device::SEND_MODE_FULL_BUFF + uhd::device::SEND_MODE_FULL_BUFF, + //send will backup into the host this many seconds before sending: + seconds_in_future + 0.1 //timeout (delay before transmit + padding) ); + if (num_tx_samps < samps_to_send) std::cout << "Send timeout..." << std::endl; if(verbose) std::cout << std::endl << boost::format("Sent %d samples") % num_tx_samps << std::endl; } diff --git a/host/include/uhd/device.hpp b/host/include/uhd/device.hpp index 2077cae62..992276928 100644 --- a/host/include/uhd/device.hpp +++ b/host/include/uhd/device.hpp @@ -41,9 +41,6 @@ public: typedef boost::function<device_addrs_t(const device_addr_t &)> find_t; typedef boost::function<sptr(const device_addr_t &)> make_t; - //! A reasonable default timeout for receive - static const size_t default_recv_timeout_ms = 100; - /*! * Register a device into the discovery and factory system. * @@ -112,12 +109,15 @@ public: * * This is a blocking call and will not return until the number * of samples returned have been read out of each buffer. + * Under a timeout condition, the number of samples returned + * may be less than the number of samples specified. * * \param buffs a vector of read-only memory containing IF data * \param nsamps_per_buff the number of samples to send, per buffer * \param metadata data describing the buffer's contents * \param io_type the type of data loaded in the buffer * \param send_mode tells send how to unload the buffer + * \param timeout the timeout in seconds to wait on a packet * \return the number of samples sent */ virtual size_t send( @@ -125,7 +125,8 @@ public: size_t nsamps_per_buff, const tx_metadata_t &metadata, const io_type_t &io_type, - send_mode_t send_mode + send_mode_t send_mode, + double timeout = 0.1 ) = 0; /*! @@ -136,7 +137,8 @@ public: size_t nsamps_per_buff, const tx_metadata_t &metadata, const io_type_t &io_type, - send_mode_t send_mode + send_mode_t send_mode, + double timeout = 0.1 ); /*! @@ -154,7 +156,9 @@ public: * See the rx metadata fragment flags and offset fields for details. * * This is a blocking call and will not return until the number - * of samples returned have been written into each buffer or timeout. + * of samples returned have been written into each buffer. + * Under a timeout condition, the number of samples returned + * may be less than the number of samples specified. * * When using the full buffer recv mode, the metadata only applies * to the first packet received and written into the recv buffers. @@ -165,7 +169,7 @@ public: * \param metadata data to fill describing the buffer * \param io_type the type of data to fill into the buffer * \param recv_mode tells recv how to load the buffer - * \param timeout_ms the timeout in milliseconds to wait for a packet + * \param timeout the timeout in seconds to wait for a packet * \return the number of samples received or 0 on error */ virtual size_t recv( @@ -174,7 +178,7 @@ public: rx_metadata_t &metadata, const io_type_t &io_type, recv_mode_t recv_mode, - size_t timeout_ms = default_recv_timeout_ms + double timeout = 0.1 ) = 0; /*! @@ -186,7 +190,7 @@ public: rx_metadata_t &metadata, const io_type_t &io_type, recv_mode_t recv_mode, - size_t timeout_ms = default_recv_timeout_ms + double timeout = 0.1 ); /*! @@ -204,12 +208,11 @@ public: /*! * Receive and asynchronous message from the device. * \param async_metadata the metadata to be filled in - * \param timeout_ms the timeout in milliseconds to wait for a message + * \param timeout the timeout in seconds to wait for a message * \return true when the async_metadata is valid, false for timeout */ virtual bool recv_async_msg( - async_metadata_t &async_metadata, - size_t timeout_ms = default_recv_timeout_ms + async_metadata_t &async_metadata, double timeout = 0.1 ) = 0; }; diff --git a/host/include/uhd/device.ipp b/host/include/uhd/device.ipp index 60a3f535d..e2e51ecd0 100644 --- a/host/include/uhd/device.ipp +++ b/host/include/uhd/device.ipp @@ -25,12 +25,13 @@ namespace uhd{ size_t nsamps_per_buff, const tx_metadata_t &metadata, const io_type_t &io_type, - send_mode_t send_mode + send_mode_t send_mode, + double timeout ){ return this->send( std::vector<const void *>(1, buff), nsamps_per_buff, metadata, - io_type, send_mode + io_type, send_mode, timeout ); } @@ -40,12 +41,12 @@ namespace uhd{ rx_metadata_t &metadata, const io_type_t &io_type, recv_mode_t recv_mode, - size_t timeout_ms + double timeout ){ return this->recv( std::vector<void *>(1, buff), nsamps_per_buff, metadata, - io_type, recv_mode, timeout_ms + io_type, recv_mode, timeout ); } diff --git a/host/include/uhd/transport/alignment_buffer.hpp b/host/include/uhd/transport/alignment_buffer.hpp index 29ba74efc..f44a037f8 100644 --- a/host/include/uhd/transport/alignment_buffer.hpp +++ b/host/include/uhd/transport/alignment_buffer.hpp @@ -48,20 +48,17 @@ namespace uhd{ namespace transport{ * \return true if the element fit without popping for space */ virtual bool push_with_pop_on_full( - const elem_type &elem, - const seq_type &seq, - size_t index + const elem_type &elem, const seq_type &seq, size_t index ) = 0; /*! * Pop an aligned set of elements from this alignment buffer. * \param elems a collection to store the aligned elements - * \param time the timeout time + * \param timeout the timeout in seconds * \return false when the operation times out */ virtual bool pop_elems_with_timed_wait( - std::vector<elem_type> &elems, - const time_duration_t &time + std::vector<elem_type> &elems, double timeout ) = 0; }; diff --git a/host/include/uhd/transport/alignment_buffer.ipp b/host/include/uhd/transport/alignment_buffer.ipp index 61b3b60f5..833b5d399 100644 --- a/host/include/uhd/transport/alignment_buffer.ipp +++ b/host/include/uhd/transport/alignment_buffer.ipp @@ -41,9 +41,7 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ } UHD_INLINE bool push_with_pop_on_full( - const elem_type &elem, - const seq_type &seq, - size_t index + const elem_type &elem, const seq_type &seq, size_t index ){ //clear the buffer for this index if the seqs are mis-ordered if (seq < _last_seqs[index]){ @@ -54,17 +52,16 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ } UHD_INLINE bool pop_elems_with_timed_wait( - std::vector<elem_type> &elems, - const time_duration_t &time + std::vector<elem_type> &elems, double timeout ){ - boost::system_time exit_time = boost::get_system_time() + time; + boost::system_time exit_time = boost::get_system_time() + to_time_dur(timeout); buff_contents_type buff_contents_tmp; std::list<size_t> indexes_to_do(_all_indexes); //do an initial pop to load an initial sequence id size_t index = indexes_to_do.front(); if (not _buffs[index]->pop_with_timed_wait( - buff_contents_tmp, exit_time - boost::get_system_time() + buff_contents_tmp, from_time_dur(exit_time - boost::get_system_time()) )) return false; elems[index] = buff_contents_tmp.first; seq_type expected_seq_id = buff_contents_tmp.second; @@ -79,7 +76,7 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ indexes_to_do = _all_indexes; index = indexes_to_do.front(); if (not _buffs[index]->pop_with_timed_wait( - buff_contents_tmp, exit_time - boost::get_system_time() + buff_contents_tmp, from_time_dur(exit_time - boost::get_system_time()) )) return false; elems[index] = buff_contents_tmp.first; expected_seq_id = buff_contents_tmp.second; @@ -89,7 +86,7 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ //pop an element off for this index index = indexes_to_do.front(); if (not _buffs[index]->pop_with_timed_wait( - buff_contents_tmp, exit_time - boost::get_system_time() + buff_contents_tmp, from_time_dur(exit_time - boost::get_system_time()) )) return false; //if the sequence id matches: diff --git a/host/include/uhd/transport/bounded_buffer.hpp b/host/include/uhd/transport/bounded_buffer.hpp index d1deece96..aca93b071 100644 --- a/host/include/uhd/transport/bounded_buffer.hpp +++ b/host/include/uhd/transport/bounded_buffer.hpp @@ -20,13 +20,9 @@ #include <uhd/config.hpp> #include <boost/shared_ptr.hpp> -#include <boost/date_time/posix_time/posix_time_types.hpp> namespace uhd{ namespace transport{ - //! typedef for the time duration type for wait operations - typedef boost::posix_time::time_duration time_duration_t; - /*! * Implement a templated bounded buffer: * Used for passing elements between threads in a producer-consumer model. @@ -64,10 +60,10 @@ namespace uhd{ namespace transport{ * Push a new element into the bounded_buffer. * Wait until the bounded_buffer becomes non-full or timeout. * \param elem the new element to push - * \param time the timeout time + * \param timeout the timeout in seconds * \return false when the operation times out */ - virtual bool push_with_timed_wait(const elem_type &elem, const time_duration_t &time) = 0; + virtual bool push_with_timed_wait(const elem_type &elem, double timeout) = 0; /*! * Pop an element from the bounded_buffer. @@ -80,10 +76,10 @@ namespace uhd{ namespace transport{ * Pop an element from the bounded_buffer. * Wait until the bounded_buffer becomes non-empty or timeout. * \param elem the element reference pop to - * \param time the timeout time + * \param timeout the timeout in seconds * \return false when the operation times out */ - virtual bool pop_with_timed_wait(elem_type &elem, const time_duration_t &time) = 0; + virtual bool pop_with_timed_wait(elem_type &elem, double timeout) = 0; /*! * Clear all elements from the bounded_buffer. diff --git a/host/include/uhd/transport/bounded_buffer.ipp b/host/include/uhd/transport/bounded_buffer.ipp index e106e229e..edc7faa06 100644 --- a/host/include/uhd/transport/bounded_buffer.ipp +++ b/host/include/uhd/transport/bounded_buffer.ipp @@ -19,17 +19,28 @@ #define INCLUDED_UHD_TRANSPORT_BOUNDED_BUFFER_IPP #include <boost/bind.hpp> +#include <boost/function.hpp> #include <boost/circular_buffer.hpp> #include <boost/thread/condition.hpp> +#include <boost/date_time/posix_time/posix_time_types.hpp> namespace uhd{ namespace transport{ namespace{ /*anon*/ + static UHD_INLINE boost::posix_time::time_duration to_time_dur(double timeout){ + return boost::posix_time::microseconds(long(timeout*1e6)); + } + + static UHD_INLINE double from_time_dur(const boost::posix_time::time_duration &time_dur){ + return 1e-6*time_dur.total_microseconds(); + } + template <typename elem_type> class bounded_buffer_impl : public bounded_buffer<elem_type>{ public: bounded_buffer_impl(size_t capacity) : _buffer(capacity){ - /* NOP */ + _not_full_fcn = boost::bind(&bounded_buffer_impl<elem_type>::not_full, this); + _not_empty_fcn = boost::bind(&bounded_buffer_impl<elem_type>::not_empty, this); } UHD_INLINE bool push_with_pop_on_full(const elem_type &elem){ @@ -51,15 +62,17 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ UHD_INLINE void push_with_wait(const elem_type &elem){ boost::unique_lock<boost::mutex> lock(_mutex); - _full_cond.wait(lock, boost::bind(&bounded_buffer_impl<elem_type>::not_full, this)); + _full_cond.wait(lock, _not_full_fcn); _buffer.push_front(elem); lock.unlock(); _empty_cond.notify_one(); } - bool push_with_timed_wait(const elem_type &elem, const time_duration_t &time){ + UHD_INLINE bool push_with_timed_wait(const elem_type &elem, double timeout){ boost::unique_lock<boost::mutex> lock(_mutex); - if (not _full_cond.timed_wait(lock, time, boost::bind(&bounded_buffer_impl<elem_type>::not_full, this))) return false; + if (not _full_cond.timed_wait( + lock, to_time_dur(timeout), _not_full_fcn + )) return false; _buffer.push_front(elem); lock.unlock(); _empty_cond.notify_one(); @@ -68,16 +81,18 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ UHD_INLINE void pop_with_wait(elem_type &elem){ boost::unique_lock<boost::mutex> lock(_mutex); - _empty_cond.wait(lock, boost::bind(&bounded_buffer_impl<elem_type>::not_empty, this)); - elem = _buffer.back(); _buffer.pop_back(); + _empty_cond.wait(lock, _not_empty_fcn); + elem = this->pop_back(); lock.unlock(); _full_cond.notify_one(); } - bool pop_with_timed_wait(elem_type &elem, const time_duration_t &time){ + UHD_INLINE bool pop_with_timed_wait(elem_type &elem, double timeout){ boost::unique_lock<boost::mutex> lock(_mutex); - if (not _empty_cond.timed_wait(lock, time, boost::bind(&bounded_buffer_impl<elem_type>::not_empty, this))) return false; - elem = _buffer.back(); _buffer.pop_back(); + if (not _empty_cond.timed_wait( + lock, to_time_dur(timeout), _not_empty_fcn + )) return false; + elem = this->pop_back(); lock.unlock(); _full_cond.notify_one(); return true; @@ -85,7 +100,7 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ UHD_INLINE void clear(void){ boost::unique_lock<boost::mutex> lock(_mutex); - while (not_empty()) _buffer.pop_back(); + while (not_empty()) this->pop_back(); lock.unlock(); _full_cond.notify_one(); } @@ -97,6 +112,21 @@ namespace uhd{ namespace transport{ namespace{ /*anon*/ bool not_full(void) const{return not _buffer.full();} bool not_empty(void) const{return not _buffer.empty();} + + boost::function<bool(void)> _not_full_fcn, _not_empty_fcn; + + /*! + * Three part operation to pop an element: + * 1) assign elem to the back element + * 2) assign the back element to empty + * 3) pop the back to move the counter + */ + UHD_INLINE elem_type pop_back(void){ + elem_type elem = _buffer.back(); + _buffer.back() = elem_type(); + _buffer.pop_back(); + return elem; + } }; }}} //namespace diff --git a/host/include/uhd/transport/udp_zero_copy.hpp b/host/include/uhd/transport/udp_zero_copy.hpp index 818709973..bbba97b21 100644 --- a/host/include/uhd/transport/udp_zero_copy.hpp +++ b/host/include/uhd/transport/udp_zero_copy.hpp @@ -20,6 +20,7 @@ #include <uhd/config.hpp> #include <uhd/transport/zero_copy.hpp> +#include <uhd/types/device_addr.hpp> #include <boost/shared_ptr.hpp> namespace uhd{ namespace transport{ @@ -50,14 +51,12 @@ public: * * \param addr a string representing the destination address * \param port a string representing the destination port - * \param recv_buff_size size in bytes for the recv buffer, 0 for automatic - * \param send_buff_size size in bytes for the send buffer, 0 for automatic + * \param hints optional parameters to pass to the underlying transport */ static sptr make( const std::string &addr, const std::string &port, - size_t recv_buff_size = 0, - size_t send_buff_size = 0 + const device_addr_t &hints = device_addr_t() ); }; diff --git a/host/include/uhd/transport/usb_control.hpp b/host/include/uhd/transport/usb_control.hpp index f9829c3ec..e6c32f78e 100644 --- a/host/include/uhd/transport/usb_control.hpp +++ b/host/include/uhd/transport/usb_control.hpp @@ -18,7 +18,7 @@ #ifndef INCLUDED_UHD_TRANSPORT_USB_CONTROL_HPP #define INCLUDED_UHD_TRANSPORT_USB_CONTROL_HPP -#include "usb_device_handle.hpp" +#include <uhd/transport/usb_device_handle.hpp> namespace uhd { namespace transport { diff --git a/host/include/uhd/transport/usb_device_handle.hpp b/host/include/uhd/transport/usb_device_handle.hpp index 9bb7db9c4..6f8d868be 100644 --- a/host/include/uhd/transport/usb_device_handle.hpp +++ b/host/include/uhd/transport/usb_device_handle.hpp @@ -38,7 +38,7 @@ namespace uhd { namespace transport { * a true descriptor serial number string. This interface returns the * actual string descriptor. */ -class usb_device_handle : boost::noncopyable { +class UHD_API usb_device_handle : boost::noncopyable { public: typedef boost::shared_ptr<usb_device_handle> sptr; diff --git a/host/include/uhd/transport/usb_zero_copy.hpp b/host/include/uhd/transport/usb_zero_copy.hpp index 61bf380ba..b39171fba 100644 --- a/host/include/uhd/transport/usb_zero_copy.hpp +++ b/host/include/uhd/transport/usb_zero_copy.hpp @@ -18,8 +18,9 @@ #ifndef INCLUDED_UHD_TRANSPORT_USB_ZERO_COPY_HPP #define INCLUDED_UHD_TRANSPORT_USB_ZERO_COPY_HPP -#include "usb_device_handle.hpp" +#include <uhd/transport/usb_device_handle.hpp> #include <uhd/transport/zero_copy.hpp> +#include <uhd/types/device_addr.hpp> namespace uhd { namespace transport { @@ -47,19 +48,13 @@ public: * \param handle a device handle that uniquely identifying the device * \param recv_endpoint an integer specifiying an IN endpoint number * \param send_endpoint an integer specifiying an OUT endpoint number - * \param recv_xfer_size the number of bytes for each receive transfer - * \param recv_num_xfers the number of simultaneous receive transfers - * \param send_xfer_size the number of bytes for each send transfer - * \param send_num_xfers the number of simultaneous send transfers + * \param hints optional parameters to pass to the underlying transport */ static sptr make( usb_device_handle::sptr handle, - unsigned int recv_endpoint, - unsigned int send_endpoint, - size_t recv_xfer_size = 0, - size_t recv_num_xfers = 0, - size_t send_xfer_size = 0, - size_t send_num_xfers = 0 + size_t recv_endpoint, + size_t send_endpoint, + const device_addr_t &hints = device_addr_t() ); }; diff --git a/host/include/uhd/transport/zero_copy.hpp b/host/include/uhd/transport/zero_copy.hpp index 513291b63..7d8fb4b83 100644 --- a/host/include/uhd/transport/zero_copy.hpp +++ b/host/include/uhd/transport/zero_copy.hpp @@ -19,10 +19,10 @@ #define INCLUDED_UHD_TRANSPORT_ZERO_COPY_HPP #include <uhd/config.hpp> -#include <uhd/utils/pimpl.hpp> #include <boost/asio/buffer.hpp> #include <boost/utility.hpp> #include <boost/shared_ptr.hpp> +#include <boost/function.hpp> namespace uhd{ namespace transport{ @@ -34,14 +34,27 @@ namespace uhd{ namespace transport{ class UHD_API managed_recv_buffer : boost::noncopyable{ public: typedef boost::shared_ptr<managed_recv_buffer> sptr; + typedef boost::function<void(void)> release_fcn_t; + + /*! + * Make a safe managed receive buffer: + * A safe managed buffer ensures that release is called once, + * either by the user or automatically upon deconstruction. + * \param buff a reference to the constant buffer + * \param release_fcn callback to release the memory + * \return a new managed receive buffer + */ + static sptr make_safe( + const boost::asio::const_buffer &buff, + const release_fcn_t &release_fcn + ); /*! - * Managed recv buffer destructor: * Signal to the transport that we are done with the buffer. - * This should be called to release the buffer to the transport. + * This should be called to release the buffer to the transport object. * After calling, the referenced memory should be considered invalid. */ - virtual ~managed_recv_buffer(void) = 0; + virtual void release(void) = 0; /*! * Get the size of the underlying buffer. @@ -71,20 +84,34 @@ namespace uhd{ namespace transport{ /*! * A managed send buffer: * Contains a reference to transport-managed memory, - * and a method to release the memory after writing. + * and a method to commit the memory after writing. */ class UHD_API managed_send_buffer : boost::noncopyable{ public: typedef boost::shared_ptr<managed_send_buffer> sptr; + typedef boost::function<void(size_t)> commit_fcn_t; + + /*! + * Make a safe managed send buffer: + * A safe managed buffer ensures that commit is called once, + * either by the user or automatically upon deconstruction. + * In the later case, the deconstructor will call commit(0). + * \param buff a reference to the mutable buffer + * \param commit_fcn callback to commit the memory + * \return a new managed send buffer + */ + static sptr make_safe( + const boost::asio::mutable_buffer &buff, + const commit_fcn_t &commit_fcn + ); /*! * Signal to the transport that we are done with the buffer. * This should be called to commit the write to the transport object. * After calling, the referenced memory should be considered invalid. * \param num_bytes the number of bytes written into the buffer - * \return the number of bytes written, 0 for timeout, negative for error */ - virtual ssize_t commit(size_t num_bytes) = 0; + virtual void commit(size_t num_bytes) = 0; /*! * Get the size of the underlying buffer. @@ -122,100 +149,46 @@ namespace uhd{ namespace transport{ /*! * Get a new receive buffer from this transport object. + * \param timeout the timeout to get the buffer in seconds * \return a managed buffer, or null sptr on timeout/error */ - virtual managed_recv_buffer::sptr get_recv_buff(void) = 0; + virtual managed_recv_buffer::sptr get_recv_buff(double timeout = 0.1) = 0; /*! - * Get the maximum number of receive frames: - * The maximum number of valid managed recv buffers, - * or the maximum number of frames in the ring buffer, - * depending upon the underlying implementation. + * Get the number of receive frames: + * The number of simultaneous receive buffers in use. * \return number of frames */ virtual size_t get_num_recv_frames(void) const = 0; /*! + * Get the size of a receive frame: + * The maximum capacity of a single receive buffer. + * \return frame size in bytes + */ + virtual size_t get_recv_frame_size(void) const = 0; + + /*! * Get a new send buffer from this transport object. + * \param timeout the timeout to get the buffer in seconds * \return a managed buffer, or null sptr on timeout/error */ - virtual managed_send_buffer::sptr get_send_buff(void) = 0; + virtual managed_send_buffer::sptr get_send_buff(double timeout = 0.1) = 0; /*! - * Get the maximum number of send frames: - * The maximum number of valid managed send buffers, - * or the maximum number of frames in the ring buffer, - * depending upon the underlying implementation. + * Get the number of send frames: + * The number of simultaneous send buffers in use. * \return number of frames */ virtual size_t get_num_send_frames(void) const = 0; - }; - - /*! - * A phony-zero-copy interface for transport objects that - * provides a zero-copy interface on top of copying transport. - * This interface implements the get managed recv buffer, - * the base class must implement the private recv method. - */ - class UHD_API phony_zero_copy_recv_if : public virtual zero_copy_if{ - public: - /*! - * Create a phony zero copy recv interface. - * \param max_buff_size max buffer size in bytes - */ - phony_zero_copy_recv_if(size_t max_buff_size); - - //! destructor - virtual ~phony_zero_copy_recv_if(void); - - /*! - * Get a new receive buffer from this transport object. - */ - managed_recv_buffer::sptr get_recv_buff(void); - - private: - /*! - * Perform a private copying recv. - * \param buff the buffer to write data into - * \return the number of bytes written to buff, 0 for timeout, negative for error - */ - virtual ssize_t recv(const boost::asio::mutable_buffer &buff) = 0; - - UHD_PIMPL_DECL(impl) _impl; - }; - - /*! - * A phony-zero-copy interface for transport objects that - * provides a zero-copy interface on top of copying transport. - * This interface implements the get managed send buffer, - * the base class must implement the private send method. - */ - class UHD_API phony_zero_copy_send_if : public virtual zero_copy_if{ - public: - /*! - * Create a phony zero copy send interface. - * \param max_buff_size max buffer size in bytes - */ - phony_zero_copy_send_if(size_t max_buff_size); - - //! destructor - virtual ~phony_zero_copy_send_if(void); - - /*! - * Get a new send buffer from this transport object. - */ - managed_send_buffer::sptr get_send_buff(void); - - private: /*! - * Perform a private copying send. - * \param buff the buffer to read data from - * \return the number of bytes read from buff, 0 for timeout, negative for error + * Get the size of a send frame: + * The maximum capacity of a single send buffer. + * \return frame size in bytes */ - virtual ssize_t send(const boost::asio::const_buffer &buff) = 0; + virtual size_t get_send_frame_size(void) const = 0; - UHD_PIMPL_DECL(impl) _impl; }; }} //namespace diff --git a/host/include/uhd/types/device_addr.hpp b/host/include/uhd/types/device_addr.hpp index e359d9467..eb3394230 100644 --- a/host/include/uhd/types/device_addr.hpp +++ b/host/include/uhd/types/device_addr.hpp @@ -20,6 +20,8 @@ #include <uhd/config.hpp> #include <uhd/types/dict.hpp> +#include <boost/lexical_cast.hpp> +#include <stdexcept> #include <vector> #include <string> @@ -62,6 +64,24 @@ namespace uhd{ * \return a string with delimiter markup */ std::string to_string(void) const; + + /*! + * Lexically cast a parameter to the specified type, + * or use the default value if the key is not found. + * \param key the key as one of the address parameters + * \param def the value to use when key is not present + * \return the casted value as type T or the default + * \throw error when the parameter cannot be casted + */ + template <typename T> T cast(const std::string &key, const T &def) const{ + if (not this->has_key(key)) return def; + try{ + return boost::lexical_cast<T>((*this)[key]); + } + catch(const boost::bad_lexical_cast &){ + throw std::runtime_error("cannot cast " + key + " = " + (*this)[key]); + } + } }; //handy typedef for a vector of device addresses diff --git a/host/include/uhd/usrp/dboard_iface.hpp b/host/include/uhd/usrp/dboard_iface.hpp index c7db244f2..c430ecd3f 100644 --- a/host/include/uhd/usrp/dboard_iface.hpp +++ b/host/include/uhd/usrp/dboard_iface.hpp @@ -242,6 +242,15 @@ public: * \param enb true for enabled */ virtual void set_clock_enabled(unit_t unit, bool enb) = 0; + + /*! + * Get the rate of the codec. + * For rx, this is the rate the ADC feeds the DSP. + * For tx, this is the rate the DSP feeds the DAC. + * \param unit which unit rx or tx + * \return the codec rate in Hz + */ + virtual double get_codec_rate(unit_t unit) = 0; }; }} //namespace diff --git a/host/lib/device.cpp b/host/lib/device.cpp index d575ebaab..386588a08 100644 --- a/host/lib/device.cpp +++ b/host/lib/device.cpp @@ -26,6 +26,7 @@ #include <boost/functional/hash.hpp> #include <boost/tuple/tuple.hpp> #include <stdexcept> +#include <iostream> using namespace uhd; @@ -73,12 +74,17 @@ device_addrs_t device::find(const device_addr_t &hint){ device_addrs_t device_addrs; BOOST_FOREACH(const dev_fcn_reg_t &fcn, get_dev_fcn_regs()){ - device_addrs_t discovered_addrs = fcn.get<0>()(hint); - device_addrs.insert( - device_addrs.begin(), - discovered_addrs.begin(), - discovered_addrs.end() - ); + try{ + device_addrs_t discovered_addrs = fcn.get<0>()(hint); + device_addrs.insert( + device_addrs.begin(), + discovered_addrs.begin(), + discovered_addrs.end() + ); + } + catch(const std::exception &e){ + std::cerr << "Device discovery error: " << e.what() << std::endl; + } } return device_addrs; diff --git a/host/lib/ic_reg_maps/CMakeLists.txt b/host/lib/ic_reg_maps/CMakeLists.txt index f8e15c13d..25f34a280 100644 --- a/host/lib/ic_reg_maps/CMakeLists.txt +++ b/host/lib/ic_reg_maps/CMakeLists.txt @@ -68,3 +68,8 @@ LIBUHD_PYTHON_GEN_SOURCE( ${CMAKE_SOURCE_DIR}/lib/ic_reg_maps/gen_ad9522_regs.py ${CMAKE_BINARY_DIR}/lib/ic_reg_maps/ad9522_regs.hpp ) + +LIBUHD_PYTHON_GEN_SOURCE( + ${CMAKE_SOURCE_DIR}/lib/ic_reg_maps/gen_tuner_4937di5_regs.py + ${CMAKE_BINARY_DIR}/lib/ic_reg_maps/tuner_4937di5_regs.hpp +) diff --git a/host/lib/ic_reg_maps/gen_max2118_regs.py b/host/lib/ic_reg_maps/gen_max2118_regs.py index 506fbaec8..506fbaec8 100644..100755 --- a/host/lib/ic_reg_maps/gen_max2118_regs.py +++ b/host/lib/ic_reg_maps/gen_max2118_regs.py diff --git a/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py b/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py new file mode 100644 index 000000000..73f7aa3db --- /dev/null +++ b/host/lib/ic_reg_maps/gen_tuner_4937di5_regs.py @@ -0,0 +1,75 @@ +#!/usr/bin/env python +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Template for raw text data describing registers +# name addr[bit range inclusive] default optional enums +######################################################################## +REGS_TMPL="""\ +######################################################################## +## Note: offsets given from perspective of data bits (excludes address) +######################################################################## +## Divider byte 1 +######################################################################## +db1 0[0:6] 0x00 +######################################################################## +## Divider byte 2 +######################################################################## +db2 1[0:7] 0x00 +######################################################################## +## Control byte 1 +######################################################################## +cb7 2[7] 0x01 +cp 2[6] 0x00 low,high +os 2[0] 0x00 on,off +rs 2[1:2] 0x00 d512=3,d640=0,d1024=1 +test 2[3:5] 0x01 normal=0x01,cpoff=0x02,cpsink=0x06,cpsrc=0x07,cptest1=0x04,cptest2=0x05 +######################################################################## +## Control byte 2 +######################################################################## +bandsel 3[4:7] 0x03 uhf=0x03,vhfhi=0x09,vhflo=0x0a +power 3[3] 0x00 on,off +""" + +######################################################################## +# Template for methods in the body of the struct +######################################################################## +BODY_TMPL="""\ +boost::uint8_t get_reg(boost::uint8_t addr){ + boost::uint8_t reg = 0; + switch(addr){ + #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs))) + case $addr: + #for $reg in filter(lambda r: r.get_addr() == addr, $regs) + reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift(); + #end for + break; + #end for + } + return boost::uint8_t(reg); +} + +""" + +if __name__ == '__main__': + import common; common.generate( + name='tuner_4937di5_regs', + regs_tmpl=REGS_TMPL, + body_tmpl=BODY_TMPL, + file=__file__, + ) diff --git a/host/lib/transport/CMakeLists.txt b/host/lib/transport/CMakeLists.txt index 61616d077..b9ec7a6ad 100644 --- a/host/lib/transport/CMakeLists.txt +++ b/host/lib/transport/CMakeLists.txt @@ -36,6 +36,10 @@ IF(LIBUSB_FOUND) INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/transport/msvc) ENDIF(MSVC) SET(HAVE_USB_SUPPORT TRUE) +ELSE(LIBUSB_FOUND) + LIBUHD_APPEND_SOURCES( + ${CMAKE_SOURCE_DIR}/lib/transport/usb_dummy_impl.cpp + ) ENDIF(LIBUSB_FOUND) IF(HAVE_USB_SUPPORT) diff --git a/host/lib/transport/libusb1_base.cpp b/host/lib/transport/libusb1_base.cpp index 26e864459..cfa77d9ca 100644 --- a/host/lib/transport/libusb1_base.cpp +++ b/host/lib/transport/libusb1_base.cpp @@ -20,9 +20,9 @@ #include <uhd/types/dict.hpp> #include <boost/weak_ptr.hpp> #include <boost/foreach.hpp> -#include <boost/thread.hpp> #include <iostream> +using namespace uhd; using namespace uhd::transport; /*********************************************************************** @@ -33,12 +33,9 @@ public: libusb_session_impl(void){ UHD_ASSERT_THROW(libusb_init(&_context) == 0); libusb_set_debug(_context, debug_level); - _thread_group.create_thread(boost::bind(&libusb_session_impl::run_event_loop, this)); } ~libusb_session_impl(void){ - _running = false; - _thread_group.join_all(); libusb_exit(_context); } @@ -48,18 +45,6 @@ public: private: libusb_context *_context; - boost::thread_group _thread_group; - bool _running; - - void run_event_loop(void){ - _running = true; - timeval tv; - while(_running){ - tv.tv_sec = 0; - tv.tv_usec = 100000; //100ms - libusb_handle_events_timeout(this->get_context(), &tv); - } - } }; libusb::session::sptr libusb::session::get_global_session(void){ @@ -210,15 +195,21 @@ private: libusb::device_handle::sptr libusb::device_handle::get_cached_handle(device::sptr dev){ static uhd::dict<libusb_device *, boost::weak_ptr<device_handle> > handles; - //not expired -> get existing session + //not expired -> get existing handle if (handles.has_key(dev->get()) and not handles[dev->get()].expired()){ return handles[dev->get()].lock(); } - //create a new global session - sptr new_handle(new libusb_device_handle_impl(dev)); - handles[dev->get()] = new_handle; - return new_handle; + //create a new cached handle + try{ + sptr new_handle(new libusb_device_handle_impl(dev)); + handles[dev->get()] = new_handle; + return new_handle; + } + catch(const std::exception &e){ + std::cerr << "USB open failed: see the application notes for your device." << std::endl; + throw std::runtime_error(e.what()); + } } /*********************************************************************** diff --git a/host/lib/transport/libusb1_zero_copy.cpp b/host/lib/transport/libusb1_zero_copy.cpp index f2dcff6b5..f589d7c77 100644 --- a/host/lib/transport/libusb1_zero_copy.cpp +++ b/host/lib/transport/libusb1_zero_copy.cpp @@ -18,18 +18,19 @@ #include "libusb1_base.hpp" #include <uhd/transport/usb_zero_copy.hpp> #include <uhd/transport/bounded_buffer.hpp> +#include <uhd/utils/thread_priority.hpp> #include <uhd/utils/assert.hpp> #include <boost/shared_array.hpp> #include <boost/foreach.hpp> #include <boost/thread.hpp> +#include <boost/enable_shared_from_this.hpp> #include <vector> #include <iostream> -#include <iomanip> +using namespace uhd; using namespace uhd::transport; -const int libusb_timeout = 0; - +static const double CLEANUP_TIMEOUT = 0.2; //seconds static const size_t DEFAULT_NUM_XFERS = 16; //num xfers static const size_t DEFAULT_XFER_SIZE = 32*512; //bytes @@ -84,10 +85,10 @@ public: * Get an available transfer: * For inputs, this is a just filled transfer. * For outputs, this is a just emptied transfer. - * \param timeout_ms the timeout to wait for a lut + * \param timeout the timeout to wait for a lut * \return the transfer pointer or NULL if timeout */ - libusb_transfer *get_lut_with_wait(size_t timeout_ms = 100); + libusb_transfer *get_lut_with_wait(double timeout); //Callback use only void callback_handle_transfer(libusb_transfer *lut); @@ -97,21 +98,18 @@ private: int _endpoint; bool _input; - size_t _transfer_size; - size_t _num_transfers; - //! hold a bounded buffer of completed transfers typedef bounded_buffer<libusb_transfer *> lut_buff_type; lut_buff_type::sptr _completed_list; //! a list of all transfer structs we allocated - std::vector<libusb_transfer *> _all_luts; + std::vector<libusb_transfer *> _all_luts; - //! a list of shared arrays for the transfer buffers - std::vector<boost::shared_array<boost::uint8_t> > _buffers; + //! a block of memory for the transfer buffers + boost::shared_array<char> _buffer; // Calls for processing asynchronous I/O - libusb_transfer *allocate_transfer(int buff_len); + libusb_transfer *allocate_transfer(void *mem, size_t len); void print_transfer_status(libusb_transfer *lut); }; @@ -156,14 +154,12 @@ usb_endpoint::usb_endpoint( ): _handle(handle), _endpoint(endpoint), - _input(input), - _transfer_size(transfer_size), - _num_transfers(num_transfers) + _input(input) { _completed_list = lut_buff_type::make(num_transfers); - - for (size_t i = 0; i < _num_transfers; i++){ - _all_luts.push_back(allocate_transfer(_transfer_size)); + _buffer = boost::shared_array<char>(new char[num_transfers*transfer_size]); + for (size_t i = 0; i < num_transfers; i++){ + _all_luts.push_back(allocate_transfer(_buffer.get() + i*transfer_size, transfer_size)); //input luts are immediately submitted to be filled //output luts go into the completed list as free buffers @@ -187,7 +183,7 @@ usb_endpoint::~usb_endpoint(void){ } //collect canceled transfers (drain the queue) - while (this->get_lut_with_wait() != NULL){}; + while (this->get_lut_with_wait(CLEANUP_TIMEOUT) != NULL){}; //free all transfers BOOST_FOREACH(libusb_transfer *lut, _all_luts){ @@ -200,23 +196,23 @@ usb_endpoint::~usb_endpoint(void){ * Allocate a libusb transfer * The allocated transfer - and buffer it contains - is repeatedly * submitted, reaped, and reused and should not be freed until shutdown. - * \param buff_len size of the individual buffer held by each transfer + * \param mem a pointer to the buffer memory + * \param len size of the individual buffer * \return pointer to an allocated libusb_transfer */ -libusb_transfer *usb_endpoint::allocate_transfer(int buff_len){ +libusb_transfer *usb_endpoint::allocate_transfer(void *mem, size_t len){ libusb_transfer *lut = libusb_alloc_transfer(0); - - boost::shared_array<boost::uint8_t> buff(new boost::uint8_t[buff_len]); - _buffers.push_back(buff); //store a reference to this shared array + UHD_ASSERT_THROW(lut != NULL); unsigned int endpoint = ((_endpoint & 0x7f) | (_input ? 0x80 : 0)); + unsigned char *buff = reinterpret_cast<unsigned char *>(mem); libusb_transfer_cb_fn lut_callback = libusb_transfer_cb_fn(&callback); libusb_fill_bulk_transfer(lut, // transfer _handle->get(), // dev_handle endpoint, // endpoint - buff.get(), // buffer - buff_len, // length + buff, // buffer + len, // length lut_callback, // callback this, // user_data 0); // timeout @@ -239,6 +235,7 @@ void usb_endpoint::submit(libusb_transfer *lut){ * \param lut pointer to an libusb_transfer */ void usb_endpoint::print_transfer_status(libusb_transfer *lut){ + std::cout << "here " << lut->status << std::endl; switch (lut->status) { case LIBUSB_TRANSFER_COMPLETED: if (lut->actual_length < lut->length) { @@ -274,138 +271,75 @@ void usb_endpoint::print_transfer_status(libusb_transfer *lut){ } } -libusb_transfer *usb_endpoint::get_lut_with_wait(size_t timeout_ms){ +libusb_transfer *usb_endpoint::get_lut_with_wait(double timeout){ boost::this_thread::disable_interruption di; //disable because the wait can throw libusb_transfer *lut; - if (_completed_list->pop_with_timed_wait( - lut, boost::posix_time::milliseconds(timeout_ms) - )) return lut; + if (_completed_list->pop_with_timed_wait(lut, timeout)) return lut; return NULL; } /*********************************************************************** - * Managed buffers + * USB zero_copy device class **********************************************************************/ -/* - * Libusb managed receive buffer - * Construct a recv buffer from a libusb transfer. The memory held by - * the libusb transfer is exposed through the managed buffer interface. - * Upon destruction, the transfer and buffer are resubmitted to the - * endpoint for further use. - */ -class libusb_managed_recv_buffer_impl : public managed_recv_buffer { +class libusb_zero_copy_impl : public usb_zero_copy, public boost::enable_shared_from_this<libusb_zero_copy_impl> { public: - libusb_managed_recv_buffer_impl(libusb_transfer *lut, - usb_endpoint::sptr endpoint) - : _buff(lut->buffer, lut->length) - { - _lut = lut; - _endpoint = endpoint; - } - - ~libusb_managed_recv_buffer_impl(void){ - _endpoint->submit(_lut); - } -private: - const boost::asio::const_buffer &get() const - { - return _buff; - } - - libusb_transfer *_lut; - usb_endpoint::sptr _endpoint; - const boost::asio::const_buffer _buff; -}; + libusb_zero_copy_impl( + libusb::device_handle::sptr handle, + size_t recv_endpoint, + size_t send_endpoint, + const device_addr_t &hints + ); -/* - * Libusb managed send buffer - * Construct a send buffer from a libusb transfer. The memory held by - * the libusb transfer is exposed through the managed buffer interface. - * Committing the buffer will set the data length and submit the buffer - * to the endpoint. Submitting a buffer multiple times or destroying - * the buffer before committing is an error. For the latter, the transfer - * is returned to the endpoint with no data for reuse. - */ -class libusb_managed_send_buffer_impl : public managed_send_buffer { -public: - libusb_managed_send_buffer_impl(libusb_transfer *lut, - usb_endpoint::sptr endpoint) - : _buff(lut->buffer, lut->length), _committed(false) - { - _lut = lut; - _endpoint = endpoint; + ~libusb_zero_copy_impl(void){ + _threads_running = false; + _thread_group.join_all(); } - ~libusb_managed_send_buffer_impl(void){ - if (!_committed) { - _lut->length = 0; - _lut->actual_length = 0; - _endpoint->submit(_lut); - } - } + managed_recv_buffer::sptr get_recv_buff(double); + managed_send_buffer::sptr get_send_buff(double); - ssize_t commit(size_t num_bytes) - { - if (_committed) { - std::cerr << "UHD: send buffer already committed" << std::endl; - return 0; - } + size_t get_num_recv_frames(void) const { return _num_recv_frames; } + size_t get_num_send_frames(void) const { return _num_send_frames; } - UHD_ASSERT_THROW(num_bytes <= boost::asio::buffer_size(_buff)); + size_t get_recv_frame_size(void) const { return _recv_frame_size; } + size_t get_send_frame_size(void) const { return _send_frame_size; } - _lut->length = num_bytes; - _lut->actual_length = 0; +private: + void release(libusb_transfer *lut){ + _recv_ep->submit(lut); + } + void commit(libusb_transfer *lut, size_t num_bytes){ + lut->length = num_bytes; try{ - _endpoint->submit(_lut); - _committed = true; - return num_bytes; + _send_ep->submit(lut); } catch(const std::exception &e){ std::cerr << "Error in commit: " << e.what() << std::endl; - return -1; } } -private: - const boost::asio::mutable_buffer &get() const - { - return _buff; - } - - libusb_transfer *_lut; - usb_endpoint::sptr _endpoint; - const boost::asio::mutable_buffer _buff; - bool _committed; -}; - - -/*********************************************************************** - * USB zero_copy device class - **********************************************************************/ -class libusb_zero_copy_impl : public usb_zero_copy -{ -private: libusb::device_handle::sptr _handle; - size_t _recv_num_frames, _send_num_frames; + const size_t _recv_frame_size, _num_recv_frames; + const size_t _send_frame_size, _num_send_frames; usb_endpoint::sptr _recv_ep, _send_ep; -public: - typedef boost::shared_ptr<libusb_zero_copy_impl> sptr; - - libusb_zero_copy_impl( - libusb::device_handle::sptr handle, - unsigned int recv_endpoint, unsigned int send_endpoint, - size_t recv_xfer_size, size_t recv_num_xfers, - size_t send_xfer_size, size_t send_num_xfers - ); - - managed_recv_buffer::sptr get_recv_buff(void); - managed_send_buffer::sptr get_send_buff(void); - - size_t get_num_recv_frames(void) const { return _recv_num_frames; } - size_t get_num_send_frames(void) const { return _send_num_frames; } + //event handler threads + boost::thread_group _thread_group; + bool _threads_running; + + void run_event_loop(void){ + set_thread_priority_safe(); + libusb::session::sptr session = libusb::session::get_global_session(); + _threads_running = true; + while(_threads_running){ + timeval tv; + tv.tv_sec = 0; + tv.tv_usec = 100000; //100ms + libusb_handle_events_timeout(session->get_context(), &tv); + } + } }; /* @@ -415,44 +349,40 @@ public: */ libusb_zero_copy_impl::libusb_zero_copy_impl( libusb::device_handle::sptr handle, - unsigned int recv_endpoint, unsigned int send_endpoint, - size_t recv_xfer_size, size_t recv_num_xfers, - size_t send_xfer_size, size_t send_num_xfers -){ - _handle = handle; - - //if the sizes are left at 0 (automatic) -> use the defaults - if (recv_xfer_size == 0) recv_xfer_size = DEFAULT_XFER_SIZE; - if (recv_num_xfers == 0) recv_num_xfers = DEFAULT_NUM_XFERS; - if (send_xfer_size == 0) send_xfer_size = DEFAULT_XFER_SIZE; - if (send_num_xfers == 0) send_num_xfers = DEFAULT_NUM_XFERS; - - //sanity check the transfer sizes - UHD_ASSERT_THROW(recv_xfer_size % 512 == 0); - UHD_ASSERT_THROW(send_xfer_size % 512 == 0); - - //store the num xfers for the num frames count - _recv_num_frames = recv_num_xfers; - _send_num_frames = send_num_xfers; - - _handle->claim_interface(2 /*in interface*/); + size_t recv_endpoint, + size_t send_endpoint, + const device_addr_t &hints +): + _handle(handle), + _recv_frame_size(size_t(hints.cast<double>("recv_frame_size", DEFAULT_XFER_SIZE))), + _num_recv_frames(size_t(hints.cast<double>("num_recv_frames", DEFAULT_NUM_XFERS))), + _send_frame_size(size_t(hints.cast<double>("send_frame_size", DEFAULT_XFER_SIZE))), + _num_send_frames(size_t(hints.cast<double>("num_send_frames", DEFAULT_NUM_XFERS))) +{ + _handle->claim_interface(2 /*in interface*/); _handle->claim_interface(1 /*out interface*/); _recv_ep = usb_endpoint::sptr(new usb_endpoint( _handle, // libusb device_handle recv_endpoint, // USB endpoint number true, // IN endpoint - recv_xfer_size, // buffer size per transfer - recv_num_xfers // number of libusb transfers + this->get_recv_frame_size(), // buffer size per transfer + this->get_num_recv_frames() // number of libusb transfers )); _send_ep = usb_endpoint::sptr(new usb_endpoint( _handle, // libusb device_handle send_endpoint, // USB endpoint number false, // OUT endpoint - send_xfer_size, // buffer size per transfer - send_num_xfers // number of libusb transfers + this->get_send_frame_size(), // buffer size per transfer + this->get_num_send_frames() // number of libusb transfers )); + + //spawn the event handler threads + size_t concurrency = hints.cast<size_t>("concurrency_hint", 1); + for (size_t i = 0; i < concurrency; i++) _thread_group.create_thread( + boost::bind(&libusb_zero_copy_impl::run_event_loop, this) + ); } /* @@ -461,15 +391,16 @@ libusb_zero_copy_impl::libusb_zero_copy_impl( * Return empty pointer if no transfer is available (timeout or error). * \return pointer to a managed receive buffer */ -managed_recv_buffer::sptr libusb_zero_copy_impl::get_recv_buff(void){ - libusb_transfer *lut = _recv_ep->get_lut_with_wait(/* TODO timeout API */); +managed_recv_buffer::sptr libusb_zero_copy_impl::get_recv_buff(double timeout){ + libusb_transfer *lut = _recv_ep->get_lut_with_wait(timeout); if (lut == NULL) { return managed_recv_buffer::sptr(); } else { - return managed_recv_buffer::sptr( - new libusb_managed_recv_buffer_impl(lut, - _recv_ep)); + return managed_recv_buffer::make_safe( + boost::asio::const_buffer(lut->buffer, lut->actual_length), + boost::bind(&libusb_zero_copy_impl::release, shared_from_this(), lut) + ); } } @@ -480,15 +411,16 @@ managed_recv_buffer::sptr libusb_zero_copy_impl::get_recv_buff(void){ * (timeout or error). * \return pointer to a managed send buffer */ -managed_send_buffer::sptr libusb_zero_copy_impl::get_send_buff(void){ - libusb_transfer *lut = _send_ep->get_lut_with_wait(/* TODO timeout API */); +managed_send_buffer::sptr libusb_zero_copy_impl::get_send_buff(double timeout){ + libusb_transfer *lut = _send_ep->get_lut_with_wait(timeout); if (lut == NULL) { return managed_send_buffer::sptr(); } else { - return managed_send_buffer::sptr( - new libusb_managed_send_buffer_impl(lut, - _send_ep)); + return managed_send_buffer::make_safe( + boost::asio::mutable_buffer(lut->buffer, this->get_send_frame_size()), + boost::bind(&libusb_zero_copy_impl::commit, shared_from_this(), lut, _1) + ); } } @@ -496,18 +428,15 @@ managed_send_buffer::sptr libusb_zero_copy_impl::get_send_buff(void){ * USB zero_copy make functions **********************************************************************/ usb_zero_copy::sptr usb_zero_copy::make( - usb_device_handle::sptr handle, - unsigned int recv_endpoint, unsigned int send_endpoint, - size_t recv_xfer_size, size_t recv_num_xfers, - size_t send_xfer_size, size_t send_num_xfers + usb_device_handle::sptr handle, + size_t recv_endpoint, + size_t send_endpoint, + const device_addr_t &hints ){ libusb::device_handle::sptr dev_handle(libusb::device_handle::get_cached_handle( boost::static_pointer_cast<libusb::special_handle>(handle)->get_device() )); return sptr(new libusb_zero_copy_impl( - dev_handle, - recv_endpoint, send_endpoint, - recv_xfer_size, recv_num_xfers, - send_xfer_size, send_num_xfers + dev_handle, recv_endpoint, send_endpoint, hints )); } diff --git a/host/lib/transport/udp_zero_copy_asio.cpp b/host/lib/transport/udp_zero_copy_asio.cpp index ee989ee2b..d84aeefdd 100644 --- a/host/lib/transport/udp_zero_copy_asio.cpp +++ b/host/lib/transport/udp_zero_copy_asio.cpp @@ -17,25 +17,58 @@ #include <uhd/transport/udp_zero_copy.hpp> #include <uhd/transport/udp_simple.hpp> //mtu +#include <uhd/transport/bounded_buffer.hpp> +#include <uhd/utils/thread_priority.hpp> #include <uhd/utils/assert.hpp> #include <uhd/utils/warning.hpp> -#include <boost/cstdint.hpp> +#include <boost/shared_array.hpp> #include <boost/asio.hpp> #include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/enable_shared_from_this.hpp> #include <iostream> +using namespace uhd; using namespace uhd::transport; +namespace asio = boost::asio; /*********************************************************************** * Constants **********************************************************************/ +//Define this to the the boost async io calls to perform receive. +//Otherwise, get_recv_buff uses a blocking receive with timeout. +//#define USE_ASIO_ASYNC_RECV + +//Define this to the the boost async io calls to perform send. +//Otherwise, the commit callback uses a blocking send. +//#define USE_ASIO_ASYNC_SEND + //enough buffering for half a second of samples at full rate on usrp2 -static const size_t MIN_RECV_SOCK_BUFF_SIZE = size_t(sizeof(boost::uint32_t) * 25e6 * 0.5); +static const size_t MIN_RECV_SOCK_BUFF_SIZE = size_t(4 * 25e6 * 0.5); + //Large buffers cause more underflow at high rates. //Perhaps this is due to the kernel scheduling, //but may change with host-based flow control. static const size_t MIN_SEND_SOCK_BUFF_SIZE = size_t(10e3); -static const double RECV_TIMEOUT = 0.1; //100 ms + +//The number of async frames to allocate for each send and recv: +//The non-async recv can have a very large number of recv frames +//because the CPU overhead is independent of the number of frames. +#ifdef USE_ASIO_ASYNC_RECV +static const size_t DEFAULT_NUM_RECV_FRAMES = 32; +#else +static const size_t DEFAULT_NUM_RECV_FRAMES = MIN_RECV_SOCK_BUFF_SIZE/udp_simple::mtu; +#endif +//The non-async send only ever requires a single frame +//because the buffer will be committed before a new get. +#ifdef USE_ASIO_ASYNC_SEND +static const size_t DEFAULT_NUM_SEND_FRAMES = 32; +#else +static const size_t DEFAULT_NUM_SEND_FRAMES = MIN_SEND_SOCK_BUFF_SIZE/udp_simple::mtu;; +#endif + +//a single concurrent thread for io_service seems to be the fastest +static const size_t CONCURRENCY_HINT = 1; /*********************************************************************** * Zero Copy UDP implementation with ASIO: @@ -44,39 +77,68 @@ static const double RECV_TIMEOUT = 0.1; //100 ms * However, it is not a true zero copy implementation as each * send and recv requires a copy operation to/from userspace. **********************************************************************/ -class udp_zero_copy_impl: - public phony_zero_copy_recv_if, - public phony_zero_copy_send_if, - public udp_zero_copy -{ +class udp_zero_copy_asio_impl : public udp_zero_copy, public boost::enable_shared_from_this<udp_zero_copy_asio_impl> { public: - typedef boost::shared_ptr<udp_zero_copy_impl> sptr; + typedef boost::shared_ptr<udp_zero_copy_asio_impl> sptr; - udp_zero_copy_impl( + udp_zero_copy_asio_impl( const std::string &addr, - const std::string &port + const std::string &port, + const device_addr_t &hints ): - phony_zero_copy_recv_if(udp_simple::mtu), - phony_zero_copy_send_if(udp_simple::mtu) + _io_service(hints.cast<size_t>("concurrency_hint", CONCURRENCY_HINT)), + _recv_frame_size(size_t(hints.cast<double>("recv_frame_size", udp_simple::mtu))), + _num_recv_frames(size_t(hints.cast<double>("num_recv_frames", DEFAULT_NUM_RECV_FRAMES))), + _send_frame_size(size_t(hints.cast<double>("send_frame_size", udp_simple::mtu))), + _num_send_frames(size_t(hints.cast<double>("num_send_frames", DEFAULT_NUM_SEND_FRAMES))) { //std::cout << boost::format("Creating udp transport for %s %s") % addr % port << std::endl; - // resolve the address - boost::asio::ip::udp::resolver resolver(_io_service); - boost::asio::ip::udp::resolver::query query(boost::asio::ip::udp::v4(), addr, port); - boost::asio::ip::udp::endpoint receiver_endpoint = *resolver.resolve(query); + //resolve the address + asio::ip::udp::resolver resolver(_io_service); + asio::ip::udp::resolver::query query(asio::ip::udp::v4(), addr, port); + asio::ip::udp::endpoint receiver_endpoint = *resolver.resolve(query); - // create, open, and connect the socket - _socket = new boost::asio::ip::udp::socket(_io_service); - _socket->open(boost::asio::ip::udp::v4()); + //create, open, and connect the socket + _socket = new asio::ip::udp::socket(_io_service); + _socket->open(asio::ip::udp::v4()); _socket->connect(receiver_endpoint); _sock_fd = _socket->native(); } - ~udp_zero_copy_impl(void){ + ~udp_zero_copy_asio_impl(void){ + delete _work; //allow io_service run to complete + _thread_group.join_all(); //wait for service threads to exit delete _socket; } + void init(void){ + //allocate all recv frames and release them to begin xfers + _pending_recv_buffs = pending_buffs_type::make(_num_recv_frames); + _recv_buffer = boost::shared_array<char>(new char[_num_recv_frames*_recv_frame_size]); + for (size_t i = 0; i < _num_recv_frames; i++){ + release(_recv_buffer.get() + i*_recv_frame_size); + } + + //allocate all send frames and push them into the fifo + _pending_send_buffs = pending_buffs_type::make(_num_send_frames); + _send_buffer = boost::shared_array<char>(new char[_num_send_frames*_send_frame_size]); + for (size_t i = 0; i < _num_send_frames; i++){ + handle_send(_send_buffer.get() + i*_send_frame_size); + } + + //spawn the service threads that will run the io service + _work = new asio::io_service::work(_io_service); //new work to delete later + for (size_t i = 0; i < CONCURRENCY_HINT; i++) _thread_group.create_thread( + boost::bind(&udp_zero_copy_asio_impl::service, this) + ); + } + + void service(void){ + set_thread_priority_safe(); + _io_service.run(); + } + //get size for internal socket buffer template <typename Opt> size_t get_buff_size(void) const{ Opt option; @@ -91,60 +153,165 @@ public: return get_buff_size<Opt>(); } + //! handle a recv callback -> push the filled memory into the fifo + UHD_INLINE void handle_recv(void *mem, size_t len){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + _pending_recv_buffs->push_with_wait(boost::asio::buffer(mem, len)); + } - //The number of frames is approximately the buffer size divided by the max datagram size. - //In reality, this is a phony zero-copy interface and the number of frames is infinite. - //However, its sensible to advertise a frame count that is approximate to buffer size. - //This way, the transport caller will have an idea about how much buffering to create. - - size_t get_num_recv_frames(void) const{ - return this->get_buff_size<boost::asio::socket_base::receive_buffer_size>()/udp_simple::mtu; + //////////////////////////////////////////////////////////////////// + #ifdef USE_ASIO_ASYNC_RECV + //////////////////////////////////////////////////////////////////// + //! pop a filled recv buffer off of the fifo and bind with the release callback + managed_recv_buffer::sptr get_recv_buff(double timeout){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + asio::mutable_buffer buff; + if (_pending_recv_buffs->pop_with_timed_wait(buff, timeout)){ + return managed_recv_buffer::make_safe( + buff, boost::bind( + &udp_zero_copy_asio_impl::release, + shared_from_this(), + asio::buffer_cast<void*>(buff) + ) + ); + } + return managed_recv_buffer::sptr(); } - size_t get_num_send_frames(void) const{ - return this->get_buff_size<boost::asio::socket_base::send_buffer_size>()/udp_simple::mtu; + //! release a recv buffer -> start an async recv on the buffer + void release(void *mem){ + _socket->async_receive( + boost::asio::buffer(mem, this->get_recv_frame_size()), + boost::bind( + &udp_zero_copy_asio_impl::handle_recv, + shared_from_this(), mem, + asio::placeholders::bytes_transferred + ) + ); } -private: - boost::asio::ip::udp::socket *_socket; - boost::asio::io_service _io_service; - int _sock_fd; + //////////////////////////////////////////////////////////////////// + #else /*USE_ASIO_ASYNC_RECV*/ + //////////////////////////////////////////////////////////////////// + managed_recv_buffer::sptr get_recv_buff(double timeout){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + asio::mutable_buffer buff; - ssize_t recv(const boost::asio::mutable_buffer &buff){ //setup timeval for timeout timeval tv; tv.tv_sec = 0; - tv.tv_usec = int(RECV_TIMEOUT*1e6); + tv.tv_usec = long(timeout*1e6); //setup rset for timeout fd_set rset; FD_ZERO(&rset); FD_SET(_sock_fd, &rset); - //call select to perform timed wait - if (::select(_sock_fd+1, &rset, NULL, NULL, &tv) <= 0) return 0; + //call select to perform timed wait and grab an available buffer with wait + //if the condition is true, call receive and return the managed buffer + if ( + ::select(_sock_fd+1, &rset, NULL, NULL, &tv) > 0 and + _pending_recv_buffs->pop_with_timed_wait(buff, timeout) + ){ + return managed_recv_buffer::make_safe( + asio::buffer( + boost::asio::buffer_cast<void *>(buff), + _socket->receive(asio::buffer(buff)) + ), + boost::bind( + &udp_zero_copy_asio_impl::release, + shared_from_this(), + asio::buffer_cast<void*>(buff) + ) + ); + } + return managed_recv_buffer::sptr(); + } + + void release(void *mem){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + handle_recv(mem, this->get_recv_frame_size()); + } - return ::recv( - _sock_fd, - boost::asio::buffer_cast<char *>(buff), - boost::asio::buffer_size(buff), 0 - ); + //////////////////////////////////////////////////////////////////// + #endif /*USE_ASIO_ASYNC_RECV*/ + //////////////////////////////////////////////////////////////////// + + size_t get_num_recv_frames(void) const {return _num_recv_frames;} + size_t get_recv_frame_size(void) const {return _recv_frame_size;} + + //! handle a send callback -> push the emptied memory into the fifo + UHD_INLINE void handle_send(void *mem){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + _pending_send_buffs->push_with_wait(boost::asio::buffer(mem, this->get_send_frame_size())); } - ssize_t send(const boost::asio::const_buffer &buff){ - return ::send( - _sock_fd, - boost::asio::buffer_cast<const char *>(buff), - boost::asio::buffer_size(buff), 0 + //! pop an empty send buffer off of the fifo and bind with the commit callback + managed_send_buffer::sptr get_send_buff(double timeout){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + asio::mutable_buffer buff; + if (_pending_send_buffs->pop_with_timed_wait(buff, timeout)){ + return managed_send_buffer::make_safe( + buff, boost::bind( + &udp_zero_copy_asio_impl::commit, + shared_from_this(), + asio::buffer_cast<void*>(buff), _1 + ) + ); + } + return managed_send_buffer::sptr(); + } + + //////////////////////////////////////////////////////////////////// + #ifdef USE_ASIO_ASYNC_SEND + //////////////////////////////////////////////////////////////////// + //! commit a send buffer -> start an async send on the buffer + void commit(void *mem, size_t len){ + _socket->async_send( + boost::asio::buffer(mem, len), + boost::bind( + &udp_zero_copy_asio_impl::handle_send, + shared_from_this(), mem + ) ); } + + //////////////////////////////////////////////////////////////////// + #else /*USE_ASIO_ASYNC_SEND*/ + //////////////////////////////////////////////////////////////////// + void commit(void *mem, size_t len){ + _socket->send(asio::buffer(mem, len)); + handle_send(mem); + } + + //////////////////////////////////////////////////////////////////// + #endif /*USE_ASIO_ASYNC_SEND*/ + //////////////////////////////////////////////////////////////////// + + size_t get_num_send_frames(void) const {return _num_send_frames;} + size_t get_send_frame_size(void) const {return _send_frame_size;} + +private: + //asio guts -> socket and service + asio::ip::udp::socket *_socket; + asio::io_service _io_service; + asio::io_service::work *_work; + int _sock_fd; + + //memory management -> buffers and fifos + boost::thread_group _thread_group; + boost::shared_array<char> _send_buffer, _recv_buffer; + typedef bounded_buffer<asio::mutable_buffer> pending_buffs_type; + pending_buffs_type::sptr _pending_recv_buffs, _pending_send_buffs; + const size_t _recv_frame_size, _num_recv_frames; + const size_t _send_frame_size, _num_send_frames; }; /*********************************************************************** * UDP zero copy make function **********************************************************************/ template<typename Opt> static void resize_buff_helper( - udp_zero_copy_impl::sptr udp_trans, + udp_zero_copy_asio_impl::sptr udp_trans, size_t target_size, const std::string &name ){ @@ -152,6 +319,13 @@ template<typename Opt> static void resize_buff_helper( if (name == "recv") min_sock_buff_size = MIN_RECV_SOCK_BUFF_SIZE; if (name == "send") min_sock_buff_size = MIN_SEND_SOCK_BUFF_SIZE; + std::string help_message; + #if defined(UHD_PLATFORM_LINUX) + help_message = str(boost::format( + "Please run: sudo sysctl -w net.core.%smem_max=%d\n" + ) % ((name == "recv")?"r":"w") % min_sock_buff_size); + #endif /*defined(UHD_PLATFORM_LINUX)*/ + //resize the buffer if size was provided if (target_size > 0){ size_t actual_size = udp_trans->resize_buff<Opt>(target_size); @@ -165,8 +339,8 @@ template<typename Opt> static void resize_buff_helper( if (actual_size < target_size) uhd::print_warning(str(boost::format( "The %s buffer is smaller than the requested size.\n" "The minimum recommended buffer size is %d bytes.\n" - "See the USRP2 application notes on buffer resizing.\n" - ) % name % min_sock_buff_size)); + "See the transport application notes on buffer resizing.\n%s" + ) % name % min_sock_buff_size % help_message)); } //only enable on platforms that are happy with the large buffer resize @@ -181,14 +355,21 @@ template<typename Opt> static void resize_buff_helper( udp_zero_copy::sptr udp_zero_copy::make( const std::string &addr, const std::string &port, - size_t recv_buff_size, - size_t send_buff_size + const device_addr_t &hints ){ - udp_zero_copy_impl::sptr udp_trans(new udp_zero_copy_impl(addr, port)); + udp_zero_copy_asio_impl::sptr udp_trans( + new udp_zero_copy_asio_impl(addr, port, hints) + ); + + //extract buffer size hints from the device addr + size_t recv_buff_size = size_t(hints.cast<double>("recv_buff_size", 0.0)); + size_t send_buff_size = size_t(hints.cast<double>("send_buff_size", 0.0)); //call the helper to resize send and recv buffers - resize_buff_helper<boost::asio::socket_base::receive_buffer_size>(udp_trans, recv_buff_size, "recv"); - resize_buff_helper<boost::asio::socket_base::send_buffer_size> (udp_trans, send_buff_size, "send"); + resize_buff_helper<asio::socket_base::receive_buffer_size>(udp_trans, recv_buff_size, "recv"); + resize_buff_helper<asio::socket_base::send_buffer_size> (udp_trans, send_buff_size, "send"); + + udp_trans->init(); //buffers resized -> call init() to use return udp_trans; } diff --git a/host/lib/transport/usb_dummy_impl.cpp b/host/lib/transport/usb_dummy_impl.cpp new file mode 100644 index 000000000..8a9772e7f --- /dev/null +++ b/host/lib/transport/usb_dummy_impl.cpp @@ -0,0 +1,39 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/transport/usb_device_handle.hpp> +#include <uhd/transport/usb_control.hpp> +#include <uhd/transport/usb_zero_copy.hpp> +#include <uhd/utils/exception.hpp> + +using namespace uhd; +using namespace uhd::transport; + +std::vector<usb_device_handle::sptr> usb_device_handle::get_device_list(boost::uint16_t, boost::uint16_t){ + return std::vector<usb_device_handle::sptr>(); //empty list +} + +usb_control::sptr usb_control::make(usb_device_handle::sptr){ + throw std::runtime_error("no usb support -> usb_control::make not implemented"); +} + +usb_zero_copy::sptr usb_zero_copy::make( + usb_device_handle::sptr, + size_t, size_t, const device_addr_t & +){ + throw std::runtime_error("no usb support -> usb_zero_copy::make not implemented"); +} diff --git a/host/lib/transport/vrt_packet_handler.hpp b/host/lib/transport/vrt_packet_handler.hpp index b603f1371..939517411 100644 --- a/host/lib/transport/vrt_packet_handler.hpp +++ b/host/lib/transport/vrt_packet_handler.hpp @@ -303,18 +303,18 @@ template <typename T> UHD_INLINE T get_context_code( * Pack a vrt header, copy-convert the data, and send it. * - helper function for vrt_packet_handler::send ******************************************************************/ - static UHD_INLINE void _send1( + static UHD_INLINE size_t _send1( send_state &state, const std::vector<const void *> &buffs, - size_t offset_bytes, - size_t num_samps, + const size_t offset_bytes, + const size_t num_samps, uhd::transport::vrt::if_packet_info_t &if_packet_info, const uhd::io_type_t &io_type, const uhd::otw_type_t &otw_type, const vrt_packer_t &vrt_packer, const get_send_buffs_t &get_send_buffs, - size_t vrt_header_offset_words32, - size_t chans_per_otw_buff + const size_t vrt_header_offset_words32, + const size_t chans_per_otw_buff ){ //load the rest of the if_packet_info in here if_packet_info.num_payload_words32 = (num_samps*chans_per_otw_buff*otw_type.get_sample_size())/sizeof(boost::uint32_t); @@ -322,7 +322,7 @@ template <typename T> UHD_INLINE T get_context_code( //get send buffers for each channel managed_send_buffs_t send_buffs(buffs.size()/chans_per_otw_buff); - UHD_ASSERT_THROW(get_send_buffs(send_buffs)); + if (not get_send_buffs(send_buffs)) return 0; std::vector<const void *> io_buffs(chans_per_otw_buff); for (size_t i = 0; i < buffs.size(); i+=chans_per_otw_buff){ @@ -343,10 +343,9 @@ template <typename T> UHD_INLINE T get_context_code( //commit the samples to the zero-copy interface size_t num_bytes_total = (vrt_header_offset_words32+if_packet_info.num_packet_words32)*sizeof(boost::uint32_t); - if (send_buffs[i]->commit(num_bytes_total) < ssize_t(num_bytes_total)){ - std::cerr << "commit to send buffer returned less than commit size" << std::endl; - } + send_buffs[i]->commit(num_bytes_total); } + return num_samps; } /******************************************************************* @@ -381,7 +380,6 @@ template <typename T> UHD_INLINE T get_context_code( //////////////////////////////////////////////////////////////// case uhd::device::SEND_MODE_ONE_PACKET:{ //////////////////////////////////////////////////////////////// - size_t num_samps = std::min(total_num_samps, max_samples_per_packet); //fill in parts of the packet info overwrote in full buff mode if_packet_info.has_tsi = metadata.has_time_spec; @@ -389,10 +387,10 @@ template <typename T> UHD_INLINE T get_context_code( if_packet_info.sob = metadata.start_of_burst; if_packet_info.eob = metadata.end_of_burst; - _send1( + return _send1( state, buffs, 0, - num_samps, + std::min(total_num_samps, max_samples_per_packet), if_packet_info, io_type, otw_type, vrt_packer, @@ -400,31 +398,32 @@ template <typename T> UHD_INLINE T get_context_code( vrt_header_offset_words32, chans_per_otw_buff ); - return num_samps; } //////////////////////////////////////////////////////////////// case uhd::device::SEND_MODE_FULL_BUFF:{ //////////////////////////////////////////////////////////////// - //calculate constants for fragmentation - const size_t num_fragments = (total_num_samps+max_samples_per_packet-1)/max_samples_per_packet; - static const size_t first_fragment_index = 0; - const size_t final_fragment_index = num_fragments-1; + size_t total_num_samps_sent = 0; //loop through the following fragment indexes - for (size_t n = first_fragment_index; n <= final_fragment_index; n++){ + while(total_num_samps_sent < total_num_samps){ + + //calculate per-loop-iteration variables + const size_t total_num_samps_unsent = total_num_samps - total_num_samps_sent; + const bool first_fragment = (total_num_samps_sent == 0); + const bool final_fragment = (total_num_samps_unsent <= max_samples_per_packet); //calculate new flags for the fragments - if_packet_info.has_tsi = metadata.has_time_spec and (n == first_fragment_index); - if_packet_info.has_tsf = metadata.has_time_spec and (n == first_fragment_index); - if_packet_info.sob = metadata.start_of_burst and (n == first_fragment_index); - if_packet_info.eob = metadata.end_of_burst and (n == final_fragment_index); + if_packet_info.has_tsi = metadata.has_time_spec and first_fragment; + if_packet_info.has_tsf = if_packet_info.has_tsi; + if_packet_info.sob = metadata.start_of_burst and first_fragment; + if_packet_info.eob = metadata.end_of_burst and final_fragment; //send the fragment with the helper function - _send1( + const size_t num_samps_sent = _send1( state, - buffs, n*max_samples_per_packet*io_type.size, - (n == final_fragment_index)?(total_num_samps%max_samples_per_packet):max_samples_per_packet, + buffs, total_num_samps_sent*io_type.size, + std::min(total_num_samps_unsent, max_samples_per_packet), if_packet_info, io_type, otw_type, vrt_packer, @@ -432,8 +431,10 @@ template <typename T> UHD_INLINE T get_context_code( vrt_header_offset_words32, chans_per_otw_buff ); + total_num_samps_sent += num_samps_sent; + if (num_samps_sent == 0) return total_num_samps_sent; } - return total_num_samps; + return total_num_samps_sent; } default: throw std::runtime_error("unknown send mode"); diff --git a/host/lib/transport/zero_copy.cpp b/host/lib/transport/zero_copy.cpp index 8a1cde694..a5a864a04 100644 --- a/host/lib/transport/zero_copy.cpp +++ b/host/lib/transport/zero_copy.cpp @@ -16,32 +16,35 @@ // #include <uhd/transport/zero_copy.hpp> -#include <boost/cstdint.hpp> -#include <boost/function.hpp> -#include <boost/bind.hpp> using namespace uhd::transport; /*********************************************************************** - * The pure-virtual deconstructor needs an implementation to be happy + * Safe managed receive buffer **********************************************************************/ -managed_recv_buffer::~managed_recv_buffer(void){ +static void release_nop(void){ /* NOP */ } -/*********************************************************************** - * Phony zero-copy recv interface implementation - **********************************************************************/ - -//! phony zero-copy recv buffer implementation -class managed_recv_buffer_impl : public managed_recv_buffer{ +class safe_managed_receive_buffer : public managed_recv_buffer{ public: - managed_recv_buffer_impl(const boost::asio::const_buffer &buff) : _buff(buff){ + safe_managed_receive_buffer( + const boost::asio::const_buffer &buff, + const release_fcn_t &release_fcn + ): + _buff(buff), _release_fcn(release_fcn) + { /* NOP */ } - ~managed_recv_buffer_impl(void){ - delete [] this->cast<const boost::uint8_t *>(); + ~safe_managed_receive_buffer(void){ + _release_fcn(); + } + + void release(void){ + release_fcn_t release_fcn = _release_fcn; + _release_fcn = &release_nop; + return release_fcn(); } private: @@ -50,64 +53,42 @@ private: } const boost::asio::const_buffer _buff; + release_fcn_t _release_fcn; }; -//! phony zero-copy recv interface implementation -struct phony_zero_copy_recv_if::impl{ - impl(size_t max_buff_size) : max_buff_size(max_buff_size){ - /* NOP */ - } - size_t max_buff_size; -}; - -phony_zero_copy_recv_if::phony_zero_copy_recv_if(size_t max_buff_size){ - _impl = UHD_PIMPL_MAKE(impl, (max_buff_size)); -} - -phony_zero_copy_recv_if::~phony_zero_copy_recv_if(void){ - /* NOP */ -} - -managed_recv_buffer::sptr phony_zero_copy_recv_if::get_recv_buff(void){ - //allocate memory - boost::uint8_t *recv_mem = new boost::uint8_t[_impl->max_buff_size]; - - //call recv() with timeout option - ssize_t num_bytes = this->recv(boost::asio::buffer(recv_mem, _impl->max_buff_size)); - - if (num_bytes <= 0) return managed_recv_buffer::sptr(); //NULL sptr - - //create a new managed buffer to house the data - return managed_recv_buffer::sptr( - new managed_recv_buffer_impl(boost::asio::buffer(recv_mem, num_bytes)) - ); +managed_recv_buffer::sptr managed_recv_buffer::make_safe( + const boost::asio::const_buffer &buff, + const release_fcn_t &release_fcn +){ + return sptr(new safe_managed_receive_buffer(buff, release_fcn)); } /*********************************************************************** - * Phony zero-copy send interface implementation + * Safe managed send buffer **********************************************************************/ +static void commit_nop(size_t){ + /* NOP */ +} -//! phony zero-copy send buffer implementation -class managed_send_buffer_impl : public managed_send_buffer{ +class safe_managed_send_buffer : public managed_send_buffer{ public: - typedef boost::function<ssize_t(const boost::asio::const_buffer &)> send_fcn_t; - - managed_send_buffer_impl( + safe_managed_send_buffer( const boost::asio::mutable_buffer &buff, - const send_fcn_t &send_fcn + const commit_fcn_t &commit_fcn ): - _buff(buff), - _send_fcn(send_fcn) + _buff(buff), _commit_fcn(commit_fcn) { /* NOP */ } - ~managed_send_buffer_impl(void){ - /* NOP */ + ~safe_managed_send_buffer(void){ + _commit_fcn(0); } - ssize_t commit(size_t num_bytes){ - return _send_fcn(boost::asio::buffer(_buff, num_bytes)); + void commit(size_t num_bytes){ + commit_fcn_t commit_fcn = _commit_fcn; + _commit_fcn = &commit_nop; + return commit_fcn(num_bytes); } private: @@ -116,28 +97,12 @@ private: } const boost::asio::mutable_buffer _buff; - const send_fcn_t _send_fcn; -}; - -//! phony zero-copy send interface implementation -struct phony_zero_copy_send_if::impl{ - boost::uint8_t *send_mem; - managed_send_buffer::sptr send_buff; + commit_fcn_t _commit_fcn; }; -phony_zero_copy_send_if::phony_zero_copy_send_if(size_t max_buff_size){ - _impl = UHD_PIMPL_MAKE(impl, ()); - _impl->send_mem = new boost::uint8_t[max_buff_size]; - _impl->send_buff = managed_send_buffer::sptr(new managed_send_buffer_impl( - boost::asio::buffer(_impl->send_mem, max_buff_size), - boost::bind(&phony_zero_copy_send_if::send, this, _1) - )); -} - -phony_zero_copy_send_if::~phony_zero_copy_send_if(void){ - delete [] _impl->send_mem; -} - -managed_send_buffer::sptr phony_zero_copy_send_if::get_send_buff(void){ - return _impl->send_buff; //FIXME there is only ever one send buff, we assume that the caller doesnt hang onto these +safe_managed_send_buffer::sptr managed_send_buffer::make_safe( + const boost::asio::mutable_buffer &buff, + const commit_fcn_t &commit_fcn +){ + return sptr(new safe_managed_send_buffer(buff, commit_fcn)); } diff --git a/host/lib/usrp/dboard/CMakeLists.txt b/host/lib/usrp/dboard/CMakeLists.txt index 3e995009e..8d3d11530 100644 --- a/host/lib/usrp/dboard/CMakeLists.txt +++ b/host/lib/usrp/dboard/CMakeLists.txt @@ -24,5 +24,6 @@ LIBUHD_APPEND_SOURCES( ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_wbx.cpp ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_dbsrx.cpp ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_unknown.cpp + ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_tvrx.cpp ) diff --git a/host/lib/usrp/dboard/db_tvrx.cpp b/host/lib/usrp/dboard/db_tvrx.cpp new file mode 100644 index 000000000..33507acaa --- /dev/null +++ b/host/lib/usrp/dboard/db_tvrx.cpp @@ -0,0 +1,477 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// No RX IO Pins Used + +// RX IO Functions + +//ADC/DAC functions: +//DAC 1: RF AGC +//DAC 2: IF AGC + +//min freq: 50e6 +//max freq: 860e6 +//gain range: [0:1dB:115dB] + +#include <uhd/utils/static.hpp> +#include <uhd/utils/assert.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/warning.hpp> +#include <uhd/types/ranges.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/dboard_base.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <boost/array.hpp> +#include <boost/math/special_functions/round.hpp> +#include <utility> +#include <cmath> +#include <cfloat> +#include <limits> +#include <tuner_4937di5_regs.hpp> + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +/*********************************************************************** + * The tvrx constants + **********************************************************************/ +static const bool tvrx_debug = false; + +static const freq_range_t tvrx_freq_range(50e6, 860e6); + +static const prop_names_t tvrx_antennas = list_of(""); //only got one + +static const uhd::dict<std::string, freq_range_t> tvrx_freq_ranges = map_list_of + ("VHFLO", freq_range_t(50e6, 158e6)) + ("VHFHI", freq_range_t(158e6, 454e6)) + ("UHF" , freq_range_t(454e6, 860e6)) +; + +static const boost::array<double, 17> vhflo_gains_db = + {{-6.00000, -6.00000, -6.00000, -4.00000, 0.00000, + 5.00000, 10.00000, 17.40000, 26.30000, 36.00000, + 43.00000, 48.00000, 49.50000, 50.10000, 50.30000, + 50.30000, 50.30000}}; + +static const boost::array<double, 17> vhfhi_gains_db = + {{13.3000, -13.3000, -13.3000, -1.0000, 7.7000, + 11.0000, 14.7000, 19.3000, 26.1000, 36.0000, + 42.7000, 46.0000, 47.0000, 47.8000, 48.2000, + 48.2000, 48.2000}}; + +static const boost::array<double, 17> uhf_gains_db = + {{-8.0000, -8.0000, -7.0000, 4.0000, 10.2000, + 14.5000, 17.5000, 20.0000, 24.5000, 30.8000, + 37.0000, 39.8000, 40.7000, 41.6000, 42.6000, + 43.2000, 43.8000}}; + +static const boost::array<double, 17> tvrx_if_gains_db = + {{-1.50000, -1.50000, -1.50000, -1.00000, 0.20000, + 2.10000, 4.30000, 6.40000, 9.00000, 12.00000, + 14.80000, 18.20000, 26.10000, 32.50000, 32.50000, + 32.50000, 32.50000}}; + +//gain linearization data +//this is from the datasheet and is dB vs. volts (below) +//i tried to curve fit this, but it's really just so nonlinear that you'd +//need dang near as many coefficients as to just map it like this and interp. +//these numbers are culled from the 4937DI5 datasheet and are probably totally inaccurate +//but if it's better than the old linear fit i'm happy +static const uhd::dict<std::string, boost::array<double, 17> > tvrx_rf_gains_db = map_list_of + ("VHFLO", vhflo_gains_db) + ("VHFHI", vhfhi_gains_db) + ("UHF" , uhf_gains_db) +; + +//sample voltages for the above points +static const boost::array<double, 17> tvrx_gains_volts = + {{0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 4.0}}; + +static uhd::dict<std::string, gain_range_t> get_tvrx_gain_ranges(void) { + double rfmax = 0.0, rfmin = FLT_MAX; + BOOST_FOREACH(const std::string range, tvrx_rf_gains_db.keys()) { + double my_max = tvrx_rf_gains_db[range].back(); //we're assuming it's monotonic + double my_min = tvrx_rf_gains_db[range].front(); //if it's not this is wrong wrong wrong + if(my_max > rfmax) rfmax = my_max; + if(my_min < rfmin) rfmin = my_min; + } + + double ifmin = tvrx_if_gains_db.front(); + double ifmax = tvrx_if_gains_db.back(); + + return map_list_of + ("RF", gain_range_t(float(rfmin), float(rfmax), float((rfmax-rfmin)/4096.0))) + ("IF", gain_range_t(float(ifmin), float(ifmax), float((ifmax-ifmin)/4096.0))) + ; +} + +static const double opamp_gain = 1.22; //onboard DAC opamp gain +static const double tvrx_if_freq = 43.75e6; //IF freq of TVRX module +static const boost::uint16_t reference_divider = 640; //clock reference divider to use +static const double reference_freq = 4.0e6; + +/*********************************************************************** + * The tvrx dboard class + **********************************************************************/ +class tvrx : public rx_dboard_base{ +public: + tvrx(ctor_args_t args); + ~tvrx(void); + + void rx_get(const wax::obj &key, wax::obj &val); + void rx_set(const wax::obj &key, const wax::obj &val); + +private: + uhd::dict<std::string, float> _gains; + double _lo_freq; + tuner_4937di5_regs_t _tuner_4937di5_regs; + boost::uint8_t _tuner_4937di5_addr(void){ + return (this->get_iface()->get_special_props().mangle_i2c_addrs)? 0x61 : 0x60; //ok really? we could rename that call + }; + + void set_gain(float gain, const std::string &name); + void set_freq(double freq); + + void update_regs(void){ + byte_vector_t regs_vector(4); + + //get the register data + for(int i=0; i<4; i++){ + regs_vector[i] = _tuner_4937di5_regs.get_reg(i); + if(tvrx_debug) std::cerr << boost::format( + "tvrx: send reg 0x%02x, value 0x%04x" + ) % int(i) % int(regs_vector[i]) << std::endl; + } + + //send the data + this->get_iface()->write_i2c( + _tuner_4937di5_addr(), regs_vector + ); + } + +}; + +/*********************************************************************** + * Register the tvrx dboard + **********************************************************************/ +static dboard_base::sptr make_tvrx(dboard_base::ctor_args_t args){ + return dboard_base::sptr(new tvrx(args)); +} + +UHD_STATIC_BLOCK(reg_tvrx_dboard){ + //register the factory function for the rx dbid + dboard_manager::register_dboard(0x0040, &make_tvrx, "tvrx"); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +tvrx::tvrx(ctor_args_t args) : rx_dboard_base(args){ + this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true); + + //set the gpio directions and atr controls (identically) + this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, 0x0); // All unused in atr + if (this->get_iface()->get_special_props().soft_clock_divider){ + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x1); // GPIO0 is clock + } + else{ + this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x0); // All Inputs + } + + //send initial register settings if necessary + + //set default freq + _lo_freq = tvrx_freq_range.min + tvrx_if_freq; //init _lo_freq to a sane default + set_freq(tvrx_freq_range.min); + + //set default gains + BOOST_FOREACH(const std::string &name, get_tvrx_gain_ranges().keys()){ + set_gain(get_tvrx_gain_ranges()[name].min, name); + } +} + +tvrx::~tvrx(void){ +} + +/*! Return a string corresponding to the relevant band + * \param freq the frequency of interest + * \return a string corresponding to the band + */ + +static std::string get_band(double freq) { + BOOST_FOREACH(const std::string &band, tvrx_freq_ranges.keys()) { + if(freq >= tvrx_freq_ranges[band].min && freq <= tvrx_freq_ranges[band].max){ + if(tvrx_debug) std::cout << "Band: " << band << std::endl; + return band; + } + } + UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * Gain Handling + **********************************************************************/ +/*! + * Execute a linear interpolation to find the voltage corresponding to a desired gain + * \param gain the desired gain in dB + * \param db_vector the vector of dB readings + * \param volts_vector the corresponding vector of voltages db_vector was sampled at + * \return a voltage to feed the TVRX analog gain + */ + +static double gain_interp(double gain, boost::array<double, 17> db_vector, boost::array<double, 17> volts_vector) { + double volts; + gain = std::clip<double>(gain, db_vector.front(), db_vector.back()); //let's not get carried away here + + boost::uint8_t gain_step = 0; + //find which bin we're in + for(size_t i = 0; i < db_vector.size()-1; i++) { + if(gain >= db_vector[i] && gain <= db_vector[i+1]) gain_step = i; + } + + //find the current slope for linear interpolation + double slope = (volts_vector[gain_step + 1] - volts_vector[gain_step]) + / (db_vector[gain_step + 1] - db_vector[gain_step]); + + //the problem here is that for gains approaching the maximum, the voltage slope becomes infinite + //i.e., a small change in gain requires an infinite change in voltage + //to cope, we limit the slope + + if(slope == std::numeric_limits<double>::infinity()) + return volts_vector[gain_step]; + + //use the volts per dB slope to find the final interpolated voltage + volts = volts_vector[gain_step] + (slope * (gain - db_vector[gain_step])); + + if(tvrx_debug) + std::cout << "Gain interp: gain: " << gain << ", gain_step: " << int(gain_step) << ", slope: " << slope << ", volts: " << volts << std::endl; + + return volts; +} + +/*! + * Convert a requested gain for the RF gain into a DAC voltage. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return dac voltage value + */ + +static float rf_gain_to_voltage(float gain, double lo_freq){ + //clip the input + gain = std::clip<float>(gain, get_tvrx_gain_ranges()["RF"].min, get_tvrx_gain_ranges()["RF"].max); + + //first we need to find out what band we're in, because gains are different across different bands + std::string band = get_band(lo_freq + tvrx_if_freq); + + //this is the voltage at the TVRX gain input + double gain_volts = gain_interp(gain, tvrx_rf_gains_db[band], tvrx_gains_volts); + //this is the voltage at the USRP DAC output + double dac_volts = gain_volts / opamp_gain; + + dac_volts = std::clip<double>(dac_volts, 0.0, 3.3); + + if (tvrx_debug) std::cerr << boost::format( + "tvrx RF AGC gain: %f dB, dac_volts: %f V" + ) % gain % dac_volts << std::endl; + + return float(dac_volts); +} + +/*! + * Convert a requested gain for the IF gain into a DAC voltage. + * The gain passed into the function will be set to the actual value. + * \param gain the requested gain in dB + * \return dac voltage value + */ + +static float if_gain_to_voltage(float gain){ + //clip the input + gain = std::clip<float>(gain, get_tvrx_gain_ranges()["IF"].min, get_tvrx_gain_ranges()["IF"].max); + + double gain_volts = gain_interp(gain, tvrx_if_gains_db, tvrx_gains_volts); + double dac_volts = gain_volts / opamp_gain; + + dac_volts = std::clip<double>(dac_volts, 0.0, 3.3); + + if (tvrx_debug) std::cerr << boost::format( + "tvrx IF AGC gain: %f dB, dac_volts: %f V" + ) % gain % dac_volts << std::endl; + + return float(dac_volts); +} + +void tvrx::set_gain(float gain, const std::string &name){ + assert_has(get_tvrx_gain_ranges().keys(), name, "tvrx gain name"); + if (name == "RF"){ + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_B, rf_gain_to_voltage(gain, _lo_freq)); + } + else if(name == "IF"){ + this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_A, if_gain_to_voltage(gain)); + } + else UHD_THROW_INVALID_CODE_PATH(); + _gains[name] = gain; +} + +/*! + * Set the tuner to center the desired frequency at 43.75MHz + * \param freq the requested frequency + */ + +void tvrx::set_freq(double freq) { + freq = std::clip<double>(freq, tvrx_freq_range.min, tvrx_freq_range.max); + std::string prev_band = get_band(_lo_freq - tvrx_if_freq); + std::string new_band = get_band(freq); + + double target_lo_freq = freq + tvrx_if_freq; //the desired LO freq for high-side mixing + double f_ref = reference_freq / double(reference_divider); //your tuning step size + + int divisor = int((target_lo_freq + (f_ref * 4.0)) / (f_ref * 8)); //the divisor we'll use + double actual_lo_freq = (f_ref * 8 * divisor); //the LO freq we'll actually get + + if((divisor & ~0x7fff)) UHD_THROW_INVALID_CODE_PATH(); + + //now we update the registers + _tuner_4937di5_regs.db1 = (divisor >> 8) & 0xff; + _tuner_4937di5_regs.db2 = divisor & 0xff; + + if(new_band == "VHFLO") _tuner_4937di5_regs.bandsel = tuner_4937di5_regs_t::BANDSEL_VHFLO; + else if(new_band == "VHFHI") _tuner_4937di5_regs.bandsel = tuner_4937di5_regs_t::BANDSEL_VHFHI; + else if(new_band == "UHF") _tuner_4937di5_regs.bandsel = tuner_4937di5_regs_t::BANDSEL_UHF; + else UHD_THROW_INVALID_CODE_PATH(); + + _tuner_4937di5_regs.power = tuner_4937di5_regs_t::POWER_OFF; + update_regs(); + + //ok don't forget to reset RF gain here if the new band != the old band + //we do this because the gains are different for different band settings + //not FAR off, but we do this to be consistent + if(prev_band != new_band) set_gain(_gains["RF"], "RF"); + + if(tvrx_debug) + std::cout << boost::format("set_freq: target LO: %f f_ref: %f divisor: %i actual LO: %f") % target_lo_freq % f_ref % divisor % actual_lo_freq << std::endl; + + _lo_freq = actual_lo_freq; //for rx props +} + +/*********************************************************************** + * Get the alias frequency of frequency freq when sampled at fs. + * \param freq the frequency of interest + * \param fs the sample rate + * \return the alias frequency + **********************************************************************/ + +static double get_alias(double freq, double fs) { + double alias; + freq = fmod(freq, fs); + if(freq >= (fs/2)) { + alias = fs - freq; + } else { + alias = freq; + } + return alias; +} + +/*********************************************************************** + * RX Get and Set + **********************************************************************/ +void tvrx::rx_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + double codec_rate; + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_NAME: + val = get_rx_id().to_pp_string(); + return; + + case SUBDEV_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case SUBDEV_PROP_GAIN: + assert_has(_gains.keys(), key.name, "tvrx gain name"); + val = _gains[key.name]; + return; + + case SUBDEV_PROP_GAIN_RANGE: + assert_has(get_tvrx_gain_ranges().keys(), key.name, "tvrx gain name"); + val = get_tvrx_gain_ranges()[key.name]; + return; + + case SUBDEV_PROP_GAIN_NAMES: + val = prop_names_t(get_tvrx_gain_ranges().keys()); + return; + + case SUBDEV_PROP_FREQ: + /* + * so here we have to do some magic. because the TVRX uses a relatively high IF, + * we have to watch the sample rate to see if the IF will be aliased + * or if it will fall within Nyquist. + */ + codec_rate = this->get_iface()->get_codec_rate(dboard_iface::UNIT_RX); + val = (_lo_freq - tvrx_if_freq) + get_alias(tvrx_if_freq, codec_rate); + return; + + case SUBDEV_PROP_FREQ_RANGE: + val = tvrx_freq_range; + return; + + case SUBDEV_PROP_ANTENNA: + val = std::string(""); + return; + + case SUBDEV_PROP_ANTENNA_NAMES: + val = tvrx_antennas; + return; + + case SUBDEV_PROP_CONNECTION: + val = SUBDEV_CONN_COMPLEX_IQ; + return; + + case SUBDEV_PROP_USE_LO_OFFSET: + val = false; + return; + + case SUBDEV_PROP_LO_LOCKED: + val = true; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void tvrx::rx_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<subdev_prop_t>()){ + case SUBDEV_PROP_GAIN: + this->set_gain(val.as<float>(), key.name); + return; + case SUBDEV_PROP_FREQ: + this->set_freq(val.as<double>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + diff --git a/host/lib/usrp/usrp1/codec_ctrl.cpp b/host/lib/usrp/usrp1/codec_ctrl.cpp index ad16f6b3a..4aa730573 100644 --- a/host/lib/usrp/usrp1/codec_ctrl.cpp +++ b/host/lib/usrp/usrp1/codec_ctrl.cpp @@ -61,6 +61,9 @@ public: float get_tx_pga_gain(void); void set_rx_pga_gain(float, char); float get_rx_pga_gain(char); + + //rx adc buffer control + void bypass_adc_buffers(bool bypass); private: usrp1_iface::sptr _iface; @@ -419,6 +422,17 @@ void usrp1_codec_ctrl_impl::set_duc_freq(double freq) } /*********************************************************************** + * Codec Control ADC buffer bypass + * Disable this for AC-coupled daughterboards (TVRX) + * By default it is initialized TRUE. + **********************************************************************/ +void usrp1_codec_ctrl_impl::bypass_adc_buffers(bool bypass) { + _ad9862_regs.byp_buffer_a = bypass; + _ad9862_regs.byp_buffer_b = bypass; + this->send_reg(2); +} + +/*********************************************************************** * Codec Control Make **********************************************************************/ usrp1_codec_ctrl::sptr usrp1_codec_ctrl::make(usrp1_iface::sptr iface, diff --git a/host/lib/usrp/usrp1/codec_ctrl.hpp b/host/lib/usrp/usrp1/codec_ctrl.hpp index 259d10ef4..e2e8a010d 100644 --- a/host/lib/usrp/usrp1/codec_ctrl.hpp +++ b/host/lib/usrp/usrp1/codec_ctrl.hpp @@ -92,6 +92,9 @@ public: //! Set the TX modulator frequency virtual void set_duc_freq(double freq) = 0; + + //! Enable or disable ADC buffer bypass + virtual void bypass_adc_buffers(bool bypass) = 0; }; #endif /* INCLUDED_USRP1_CODEC_CTRL_HPP */ diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp index 4791b55ce..1ac15a46a 100644 --- a/host/lib/usrp/usrp1/dboard_iface.cpp +++ b/host/lib/usrp/usrp1/dboard_iface.cpp @@ -32,6 +32,8 @@ using namespace uhd; using namespace uhd::usrp; using namespace boost::assign; +static const dboard_id_t tvrx_id(0x0040); + class usrp1_dboard_iface : public dboard_iface { public: @@ -51,6 +53,10 @@ public: //init the clock rate shadows this->set_clock_rate(UNIT_RX, this->get_clock_rates(UNIT_RX).front()); this->set_clock_rate(UNIT_TX, this->get_clock_rates(UNIT_TX).front()); + + //yes this is evil but it's necessary for TVRX to work on USRP1 + if(_rx_dboard_id == tvrx_id) _codec->bypass_adc_buffers(false); + //else _codec->bypass_adc_buffers(false); //don't think this is necessary } ~usrp1_dboard_iface() @@ -93,6 +99,7 @@ public: std::vector<double> get_clock_rates(unit_t); double get_clock_rate(unit_t); void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); private: usrp1_iface::sptr _iface; @@ -170,6 +177,10 @@ void usrp1_dboard_iface::set_clock_enabled(unit_t, bool) //TODO we can only enable for special case anyway... } +double usrp1_dboard_iface::get_codec_rate(unit_t){ + return _clock->get_master_clock_freq(); +} + /*********************************************************************** * GPIO **********************************************************************/ diff --git a/host/lib/usrp/usrp1/io_impl.cpp b/host/lib/usrp/usrp1/io_impl.cpp index 73974f2d6..6728d9b15 100644 --- a/host/lib/usrp/usrp1/io_impl.cpp +++ b/host/lib/usrp/usrp1/io_impl.cpp @@ -33,33 +33,26 @@ using namespace uhd::usrp; using namespace uhd::transport; namespace asio = boost::asio; +static const size_t alignment_padding = 512; + /*********************************************************************** - * Pseudo send buffer implementation + * Helper struct to associate an offset with a buffer **********************************************************************/ -class pseudo_managed_send_buffer : public managed_send_buffer{ +class offset_send_buffer{ public: + typedef boost::shared_ptr<offset_send_buffer> sptr; - pseudo_managed_send_buffer( - const boost::asio::mutable_buffer &buff, - const boost::function<ssize_t(size_t)> &commit - ): - _buff(buff), - _commit(commit) - { - /* NOP */ + static sptr make(managed_send_buffer::sptr buff, size_t offset = 0){ + return sptr(new offset_send_buffer(buff, offset)); } - ssize_t commit(size_t num_bytes){ - return _commit(num_bytes); - } + //member variables + managed_send_buffer::sptr buff; + size_t offset; /* in bytes */ private: - const boost::asio::mutable_buffer &get(void) const{ - return _buff; - } - - const boost::asio::mutable_buffer _buff; - const boost::function<ssize_t(size_t)> _commit; + offset_send_buffer(managed_send_buffer::sptr buff, size_t offset): + buff(buff), offset(offset){/* NOP */} }; /*********************************************************************** @@ -70,8 +63,8 @@ struct usrp1_impl::io_impl{ data_transport(data_transport), underflow_poll_samp_count(0), overflow_poll_samp_count(0), - send_buff(data_transport->get_send_buff()), - num_bytes_committed(0) + curr_buff_committed(true), + curr_buff(offset_send_buffer::make(data_transport->get_send_buff())) { /* NOP */ } @@ -91,100 +84,91 @@ struct usrp1_impl::io_impl{ size_t overflow_poll_samp_count; //wrapper around the actual send buffer interface - //all of this to ensure only full buffers are committed - managed_send_buffer::sptr send_buff; - size_t num_bytes_committed; - boost::uint8_t pseudo_buff[BYTES_PER_PACKET]; - ssize_t phony_commit_pseudo_buff(size_t num_bytes); - ssize_t phony_commit_send_buff(size_t num_bytes); - ssize_t commit_send_buff(void); + //all of this to ensure only aligned lengths are committed + //NOTE: you must commit before getting a new buffer + //since the vrt packet handler obeys this, we are ok + bool curr_buff_committed; + offset_send_buffer::sptr curr_buff; + void commit_send_buff(offset_send_buffer::sptr, offset_send_buffer::sptr, size_t); void flush_send_buff(void); - bool get_send_buffs(vrt_packet_handler::managed_send_buffs_t &); - - //helpers to get at the send buffer + offset - inline void *get_send_mem_ptr(void){ - return send_buff->cast<boost::uint8_t *>() + num_bytes_committed; - } - inline size_t get_send_mem_size(void){ - return send_buff->size() - num_bytes_committed; - } + bool get_send_buffs(vrt_packet_handler::managed_send_buffs_t &, double); }; /*! - * Accept a commit of num bytes to the pseudo buffer. - * Memcpy the entire contents of pseudo buffer into send buffers. - * - * Under most conditions: - * The first loop iteration will fill the remainder of the send buffer. - * The second loop iteration will empty the pseudo buffer remainder. + * Perform an actual commit on the send buffer: + * Copy the remainder of alignment to the next buffer. + * Commit the current buffer at multiples of alignment. */ -ssize_t usrp1_impl::io_impl::phony_commit_pseudo_buff(size_t num_bytes){ - size_t bytes_to_copy = num_bytes, bytes_copied = 0; - while(bytes_to_copy){ - size_t bytes_copied_here = std::min(bytes_to_copy, get_send_mem_size()); - std::memcpy(get_send_mem_ptr(), pseudo_buff + bytes_copied, bytes_copied_here); - ssize_t ret = phony_commit_send_buff(bytes_copied_here); - if (ret < 0) return ret; - bytes_to_copy -= ret; - bytes_copied += ret; - } - return bytes_copied; -} +void usrp1_impl::io_impl::commit_send_buff( + offset_send_buffer::sptr curr, + offset_send_buffer::sptr next, + size_t num_bytes +){ + //total number of bytes now in the current buffer + size_t bytes_in_curr_buffer = curr->offset + num_bytes; + + //calculate how many to commit and remainder + size_t num_bytes_remaining = bytes_in_curr_buffer % alignment_padding; + size_t num_bytes_to_commit = bytes_in_curr_buffer - num_bytes_remaining; + + //copy the remainder into the next buffer + std::memcpy( + next->buff->cast<char *>() + next->offset, + curr->buff->cast<char *>() + num_bytes_to_commit, + num_bytes_remaining + ); -/*! - * Accept a commit of num bytes to the send buffer. - * Conditionally commit the send buffer if full. - */ -ssize_t usrp1_impl::io_impl::phony_commit_send_buff(size_t num_bytes){ - num_bytes_committed += num_bytes; - if (num_bytes_committed != send_buff->size()) return num_bytes; - ssize_t ret = commit_send_buff(); - return (ret < 0)? ret : num_bytes; + //update the offset into the next buffer + next->offset += num_bytes_remaining; + + //commit the current buffer + curr->buff->commit(num_bytes_to_commit); + curr_buff_committed = true; } /*! - * Flush the send buffer: - * Zero-pad the send buffer to the nearest 512 byte boundary and commit. + * Flush the current buffer by padding out to alignment and committing. */ void usrp1_impl::io_impl::flush_send_buff(void){ - size_t bytes_to_pad = (-1*num_bytes_committed)%512; - std::memset(get_send_mem_ptr(), 0, bytes_to_pad); - num_bytes_committed += bytes_to_pad; - commit_send_buff(); + //calculate the number of bytes to alignment + size_t bytes_to_pad = (-1*curr_buff->offset)%alignment_padding; + + //get the buffer, clear, and commit (really current buffer) + vrt_packet_handler::managed_send_buffs_t buffs(1); + if (this->get_send_buffs(buffs, 0.1)){ + std::memset(buffs[0]->cast<void *>(), 0, bytes_to_pad); + buffs[0]->commit(bytes_to_pad); + } } /*! - * Perform an actual commit on the send buffer: - * Commit the contents of the send buffer and request a new buffer. + * Get a managed send buffer with the alignment padding: + * Always grab the next send buffer so we can timeout here. */ -ssize_t usrp1_impl::io_impl::commit_send_buff(void){ - ssize_t ret = send_buff->commit(num_bytes_committed); - send_buff = data_transport->get_send_buff(); - num_bytes_committed = 0; - return ret; -} - bool usrp1_impl::io_impl::get_send_buffs( - vrt_packet_handler::managed_send_buffs_t &buffs + vrt_packet_handler::managed_send_buffs_t &buffs, double timeout ){ - UHD_ASSERT_THROW(buffs.size() == 1); + UHD_ASSERT_THROW(curr_buff_committed and buffs.size() == 1); + + //try to get a new managed buffer with timeout + offset_send_buffer::sptr next_buff(offset_send_buffer::make(data_transport->get_send_buff(timeout))); + if (not next_buff->buff.get()) return false; /* propagate timeout here */ + + //calculate the buffer pointer and size given the offset + //references to the buffers are held in the bound function + buffs[0] = managed_send_buffer::make_safe( + boost::asio::buffer( + curr_buff->buff->cast<char *>() + curr_buff->offset, + curr_buff->buff->size() - curr_buff->offset + ), + boost::bind(&usrp1_impl::io_impl::commit_send_buff, this, curr_buff, next_buff, _1) + ); - //not enough bytes free -> use the pseudo buffer - if (get_send_mem_size() < BYTES_PER_PACKET){ - buffs[0] = managed_send_buffer::sptr(new pseudo_managed_send_buffer( - boost::asio::buffer(pseudo_buff), - boost::bind(&usrp1_impl::io_impl::phony_commit_pseudo_buff, this, _1) - )); - } - //otherwise use the send buffer offset by the bytes written - else{ - buffs[0] = managed_send_buffer::sptr(new pseudo_managed_send_buffer( - boost::asio::buffer(get_send_mem_ptr(), get_send_mem_size()), - boost::bind(&usrp1_impl::io_impl::phony_commit_send_buff, this, _1) - )); - } + //store the next buffer for the next call + curr_buff = next_buff; + curr_buff_committed = false; - return buffs[0].get() != NULL; + return true; } /*********************************************************************** @@ -213,10 +197,17 @@ static void usrp1_bs_vrt_packer( if_packet_info.num_packet_words32 = if_packet_info.num_payload_words32; } +size_t usrp1_impl::get_max_send_samps_per_packet(void) const { + return (_data_transport->get_send_frame_size() - alignment_padding) + / _tx_otw_type.get_sample_size() + / _tx_subdev_spec.size() + ; +} + size_t usrp1_impl::send( const std::vector<const void *> &buffs, size_t num_samps, const tx_metadata_t &metadata, const io_type_t &io_type, - send_mode_t send_mode + send_mode_t send_mode, double timeout ){ size_t num_samps_sent = vrt_packet_handler::send( _io_impl->packet_handler_send_state, //last state of the send handler @@ -225,7 +216,7 @@ size_t usrp1_impl::send( io_type, _tx_otw_type, //input and output types to convert _clock_ctrl->get_master_clock_freq(), //master clock tick rate &usrp1_bs_vrt_packer, - boost::bind(&usrp1_impl::io_impl::get_send_buffs, _io_impl.get(), _1), + boost::bind(&usrp1_impl::io_impl::get_send_buffs, _io_impl.get(), _1, timeout), get_max_send_samps_per_packet(), 0, //vrt header offset _tx_subdev_spec.size() //num channels @@ -272,18 +263,25 @@ static void usrp1_bs_vrt_unpacker( } static bool get_recv_buffs( - zero_copy_if::sptr zc_if, + zero_copy_if::sptr zc_if, double timeout, vrt_packet_handler::managed_recv_buffs_t &buffs ){ UHD_ASSERT_THROW(buffs.size() == 1); - buffs[0] = zc_if->get_recv_buff(); + buffs[0] = zc_if->get_recv_buff(timeout); return buffs[0].get() != NULL; } +size_t usrp1_impl::get_max_recv_samps_per_packet(void) const { + return _data_transport->get_recv_frame_size() + / _rx_otw_type.get_sample_size() + / _rx_subdev_spec.size() + ; +} + size_t usrp1_impl::recv( const std::vector<void *> &buffs, size_t num_samps, rx_metadata_t &metadata, const io_type_t &io_type, - recv_mode_t recv_mode, size_t /*timeout_ms TODO*/ + recv_mode_t recv_mode, double timeout ){ size_t num_samps_recvd = vrt_packet_handler::recv( _io_impl->packet_handler_recv_state, //last state of the recv handler @@ -292,7 +290,7 @@ size_t usrp1_impl::recv( io_type, _rx_otw_type, //input and output types to convert _clock_ctrl->get_master_clock_freq(), //master clock tick rate &usrp1_bs_vrt_unpacker, - boost::bind(&get_recv_buffs, _data_transport, _1), + boost::bind(&get_recv_buffs, _data_transport, timeout, _1), &vrt_packet_handler::handle_overflow_nop, 0, //vrt header offset _rx_subdev_spec.size() //num channels diff --git a/host/lib/usrp/usrp1/usrp1_iface.cpp b/host/lib/usrp/usrp1/usrp1_iface.cpp index 5fd3987d5..64ced2905 100644 --- a/host/lib/usrp/usrp1/usrp1_iface.cpp +++ b/host/lib/usrp/usrp1/usrp1_iface.cpp @@ -49,7 +49,7 @@ public: ******************************************************************/ void poke32(boost::uint32_t addr, boost::uint32_t value) { - boost::uint32_t swapped = byteswap(value); + boost::uint32_t swapped = uhd::htonx(value); if (iface_debug) { std::cout.fill('0'); @@ -72,12 +72,6 @@ public: std::cerr << "USRP: failed memory write: " << ret << std::endl; } - void poke16(boost::uint32_t, boost::uint16_t) - { - //fpga only handles 32 bit writes - std::cerr << "USRP: unsupported operation: poke16()" << std::endl; - } - boost::uint32_t peek32(boost::uint32_t addr) { boost::uint32_t value_out; @@ -95,13 +89,7 @@ public: if (ret < 0) std::cerr << "USRP: failed memory read: " << ret << std::endl; - return byteswap(value_out); - } - - boost::uint16_t peek16(boost::uint32_t addr) - { - boost::uint32_t val = peek32(addr); - return boost::uint16_t(val & 0xff); + return uhd::ntohx(value_out); } /******************************************************************* diff --git a/host/lib/usrp/usrp1/usrp1_iface.hpp b/host/lib/usrp/usrp1/usrp1_iface.hpp index 9a3fdd6bc..3f608584a 100644 --- a/host/lib/usrp/usrp1/usrp1_iface.hpp +++ b/host/lib/usrp/usrp1/usrp1_iface.hpp @@ -54,20 +54,6 @@ public: virtual boost::uint32_t peek32(boost::uint32_t addr) = 0; /*! - * Write a register (16 bits) - * \param addr the address - * \param data the 16bit data - */ - virtual void poke16(boost::uint32_t addr, boost::uint16_t data) = 0; - - /*! - * read a register (16 bits) - * \param addr the address - * \return the 16bit data - */ - virtual boost::uint16_t peek16(boost::uint32_t addr) = 0; - - /*! * Perform an spi transaction. * \param which_slave the slave device number * \param config spi config args diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index 793e3027d..276ca86f6 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -83,9 +83,7 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) //find the usrps and load firmware BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { - usb_control::sptr ctrl_transport = usb_control::make(handle); - usrp_ctrl::sptr usrp_ctrl = usrp_ctrl::make(ctrl_transport); - usrp_ctrl->usrp_load_firmware(usrp1_fw_image); + usrp_ctrl::make(usb_control::make(handle))->usrp_load_firmware(usrp1_fw_image); } //get descriptors again with serial number, but using the initialized VID/PID now since we have firmware @@ -93,13 +91,13 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) pid = USRP1_PRODUCT_ID; BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { - device_addr_t new_addr; - new_addr["type"] = "usrp1"; - new_addr["serial"] = handle->get_serial(); - //this is a found usrp1 when a hint serial is not specified or it matches - if (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]){ - usrp1_addrs.push_back(new_addr); - } + device_addr_t new_addr; + new_addr["type"] = "usrp1"; + new_addr["serial"] = handle->get_serial(); + //this is a found usrp1 when a hint serial is not specified or it matches + if (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]){ + usrp1_addrs.push_back(new_addr); + } } return usrp1_addrs; @@ -108,17 +106,8 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) /*********************************************************************** * Make **********************************************************************/ -template<typename output_type> static output_type cast_from_dev_addr( - const device_addr_t &device_addr, - const std::string &key, - output_type def_val -){ - return (device_addr.has_key(key))? - boost::lexical_cast<output_type>(device_addr[key]) : def_val; -} +static device::sptr usrp1_make(const device_addr_t &device_addr){ -static device::sptr usrp1_make(const device_addr_t &device_addr) -{ //extract the FPGA path for the USRP1 std::string usrp1_fpga_image = find_image_path( device_addr.has_key("fpga")? device_addr["fpga"] : "usrp1_fpga.rbf" @@ -129,29 +118,26 @@ static device::sptr usrp1_make(const device_addr_t &device_addr) std::vector<usb_device_handle::sptr> device_list = usb_device_handle::get_device_list(USRP1_VENDOR_ID, USRP1_PRODUCT_ID); - //create data and control transports - usb_zero_copy::sptr data_transport; - usrp_ctrl::sptr usrp_ctrl; - - - BOOST_FOREACH(usb_device_handle::sptr handle, device_list) { - if (handle->get_serial() == device_addr["serial"]) { - usb_control::sptr ctrl_transport = usb_control::make(handle); - usrp_ctrl = usrp_ctrl::make(ctrl_transport); - usrp_ctrl->usrp_load_fpga(usrp1_fpga_image); - - data_transport = usb_zero_copy::make( - handle, // identifier - 6, // IN endpoint - 2, // OUT endpoint - size_t(cast_from_dev_addr<double>(device_addr, "recv_xfer_size", 0)), - size_t(cast_from_dev_addr<double>(device_addr, "recv_num_xfers", 0)), - size_t(cast_from_dev_addr<double>(device_addr, "send_xfer_size", 0)), - size_t(cast_from_dev_addr<double>(device_addr, "send_num_xfers", 0)) - ); + //locate the matching handle in the device list + usb_device_handle::sptr handle; + BOOST_FOREACH(usb_device_handle::sptr dev_handle, device_list) { + if (dev_handle->get_serial() == device_addr["serial"]){ + handle = dev_handle; break; } } + UHD_ASSERT_THROW(handle.get() != NULL); //better be found + + //create control objects and a data transport + usb_control::sptr ctrl_transport = usb_control::make(handle); + usrp_ctrl::sptr usrp_ctrl = usrp_ctrl::make(ctrl_transport); + usrp_ctrl->usrp_load_fpga(usrp1_fpga_image); + usb_zero_copy::sptr data_transport = usb_zero_copy::make( + handle, // identifier + 6, // IN endpoint + 2, // OUT endpoint + device_addr // param hints + ); //create the usrp1 implementation guts return device::sptr(new usrp1_impl(data_transport, usrp_ctrl)); @@ -211,9 +197,9 @@ usrp1_impl::~usrp1_impl(void){ /* NOP */ } -bool usrp1_impl::recv_async_msg(uhd::async_metadata_t &, size_t timeout_ms){ +bool usrp1_impl::recv_async_msg(uhd::async_metadata_t &, double timeout){ //dummy fill-in for the recv_async_msg - boost::this_thread::sleep(boost::posix_time::milliseconds(timeout_ms)); + boost::this_thread::sleep(boost::posix_time::microseconds(long(timeout*1e6))); return false; } diff --git a/host/lib/usrp/usrp1/usrp1_impl.hpp b/host/lib/usrp/usrp1/usrp1_impl.hpp index 20ae3c02a..ff4d40762 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.hpp +++ b/host/lib/usrp/usrp1/usrp1_impl.hpp @@ -83,25 +83,18 @@ public: size_t, const uhd::tx_metadata_t &, const uhd::io_type_t &, - send_mode_t); + send_mode_t, double); size_t recv(const std::vector<void *> &, size_t, uhd::rx_metadata_t &, const uhd::io_type_t &, - recv_mode_t, - size_t timeout); + recv_mode_t, double); - static const size_t BYTES_PER_PACKET = 512*4; //under the transfer size + size_t get_max_send_samps_per_packet(void) const; - size_t get_max_send_samps_per_packet(void) const { - return BYTES_PER_PACKET/_tx_otw_type.get_sample_size()/_tx_subdev_spec.size(); - } - - size_t get_max_recv_samps_per_packet(void) const { - return BYTES_PER_PACKET/_rx_otw_type.get_sample_size()/_rx_subdev_spec.size(); - } + size_t get_max_recv_samps_per_packet(void) const; - bool recv_async_msg(uhd::async_metadata_t &, size_t); + bool recv_async_msg(uhd::async_metadata_t &, double); private: /*! diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp index f6d2b718a..fdfbf0d17 100644 --- a/host/lib/usrp/usrp2/dboard_iface.cpp +++ b/host/lib/usrp/usrp2/dboard_iface.cpp @@ -61,6 +61,7 @@ public: double get_clock_rate(unit_t); std::vector<double> get_clock_rates(unit_t); void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); void write_spi( unit_t unit, @@ -158,6 +159,9 @@ void usrp2_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ } } +double usrp2_dboard_iface::get_codec_rate(unit_t){ + return _clock_ctrl->get_master_clock_rate(); +} /*********************************************************************** * GPIO **********************************************************************/ diff --git a/host/lib/usrp/usrp2/io_impl.cpp b/host/lib/usrp/usrp2/io_impl.cpp index 65411801d..eba704059 100644 --- a/host/lib/usrp/usrp2/io_impl.cpp +++ b/host/lib/usrp/usrp2/io_impl.cpp @@ -58,9 +58,9 @@ struct usrp2_impl::io_impl{ recv_pirate_crew.join_all(); } - bool get_recv_buffs(vrt_packet_handler::managed_recv_buffs_t &buffs, size_t timeout_ms){ + bool get_recv_buffs(vrt_packet_handler::managed_recv_buffs_t &buffs, double timeout){ boost::this_thread::disable_interruption di; //disable because the wait can throw - return recv_pirate_booty->pop_elems_with_timed_wait(buffs, boost::posix_time::milliseconds(timeout_ms)); + return recv_pirate_booty->pop_elems_with_timed_wait(buffs, timeout); } //state management for the vrt packet handler code @@ -168,22 +168,16 @@ void usrp2_impl::io_init(void){ _mboards.at(i), i )); } - - std::cout << "RX samples per packet: " << get_max_recv_samps_per_packet() << std::endl; - std::cout << "TX samples per packet: " << get_max_send_samps_per_packet() << std::endl; - std::cout << "Recv pirate num frames: " << num_frames << std::endl; } /*********************************************************************** * Async Data **********************************************************************/ bool usrp2_impl::recv_async_msg( - async_metadata_t &async_metadata, size_t timeout_ms + async_metadata_t &async_metadata, double timeout ){ boost::this_thread::disable_interruption di; //disable because the wait can throw - return _io_impl->async_msg_fifo->pop_with_timed_wait( - async_metadata, boost::posix_time::milliseconds(timeout_ms) - ); + return _io_impl->async_msg_fifo->pop_with_timed_wait(async_metadata, timeout); } /*********************************************************************** @@ -191,28 +185,40 @@ bool usrp2_impl::recv_async_msg( **********************************************************************/ static bool get_send_buffs( const std::vector<udp_zero_copy::sptr> &trans, - vrt_packet_handler::managed_send_buffs_t &buffs + vrt_packet_handler::managed_send_buffs_t &buffs, + double timeout ){ UHD_ASSERT_THROW(trans.size() == buffs.size()); + bool good = true; for (size_t i = 0; i < buffs.size(); i++){ - buffs[i] = trans[i]->get_send_buff(); + buffs[i] = trans[i]->get_send_buff(timeout); + good = good and (buffs[i].get() != NULL); } - return true; + return good; +} + +size_t usrp2_impl::get_max_send_samps_per_packet(void) const{ + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + const size_t bpp = _data_transports.front()->get_send_frame_size() - hdr_size; + return bpp/_tx_otw_type.get_sample_size(); } size_t usrp2_impl::send( const std::vector<const void *> &buffs, size_t num_samps, const tx_metadata_t &metadata, const io_type_t &io_type, - send_mode_t send_mode + send_mode_t send_mode, double timeout ){ return vrt_packet_handler::send( _io_impl->packet_handler_send_state, //last state of the send handler buffs, num_samps, //buffer to fill metadata, send_mode, //samples metadata - io_type, _io_helper.get_tx_otw_type(), //input and output types to convert + io_type, _tx_otw_type, //input and output types to convert _mboards.front()->get_master_clock_freq(), //master clock tick rate uhd::transport::vrt::if_hdr_pack_be, - boost::bind(&get_send_buffs, _data_transports, _1), + boost::bind(&get_send_buffs, _data_transports, _1, timeout), get_max_send_samps_per_packet() ); } @@ -220,18 +226,28 @@ size_t usrp2_impl::send( /*********************************************************************** * Receive Data **********************************************************************/ +size_t usrp2_impl::get_max_recv_samps_per_packet(void) const{ + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + + sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + const size_t bpp = _data_transports.front()->get_recv_frame_size() - hdr_size; + return bpp/_rx_otw_type.get_sample_size(); +} + size_t usrp2_impl::recv( const std::vector<void *> &buffs, size_t num_samps, rx_metadata_t &metadata, const io_type_t &io_type, - recv_mode_t recv_mode, size_t timeout_ms + recv_mode_t recv_mode, double timeout ){ return vrt_packet_handler::recv( _io_impl->packet_handler_recv_state, //last state of the recv handler buffs, num_samps, //buffer to fill metadata, recv_mode, //samples metadata - io_type, _io_helper.get_rx_otw_type(), //input and output types to convert + io_type, _rx_otw_type, //input and output types to convert _mboards.front()->get_master_clock_freq(), //master clock tick rate uhd::transport::vrt::if_hdr_unpack_be, - boost::bind(&usrp2_impl::io_impl::get_recv_buffs, _io_impl.get(), _1, timeout_ms) + boost::bind(&usrp2_impl::io_impl::get_recv_buffs, _io_impl.get(), _1, timeout) ); } diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index 0b9f8ee83..a0e6adfad 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -38,10 +38,10 @@ using namespace uhd::usrp; usrp2_mboard_impl::usrp2_mboard_impl( size_t index, transport::udp_simple::sptr ctrl_transport, - const usrp2_io_helper &io_helper + size_t recv_frame_size ): _index(index), - _io_helper(io_helper) + _recv_frame_size(recv_frame_size) { //make a new interface for usrp2 stuff _iface = usrp2_iface::make(ctrl_transport); @@ -75,7 +75,7 @@ usrp2_mboard_impl::usrp2_mboard_impl( this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); //init the rx control registers - _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _io_helper.get_max_recv_samps_per_packet()); + _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _recv_frame_size); _iface->poke32(U2_REG_RX_CTRL_NCHANNELS, 1); _iface->poke32(U2_REG_RX_CTRL_CLEAR_OVERRUN, 1); //reset _iface->poke32(U2_REG_RX_CTRL_VRT_HEADER, 0 @@ -178,7 +178,7 @@ void usrp2_mboard_impl::set_time_spec(const time_spec_t &time_spec, bool now){ void usrp2_mboard_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd){ _iface->poke32(U2_REG_RX_CTRL_STREAM_CMD, dsp_type1::calc_stream_cmd_word( - stream_cmd, _io_helper.get_max_recv_samps_per_packet() + stream_cmd, _recv_frame_size )); _iface->poke32(U2_REG_RX_CTRL_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); _iface->poke32(U2_REG_RX_CTRL_TIME_TICKS, stream_cmd.time_spec.get_tick_count(get_master_clock_freq())); diff --git a/host/lib/usrp/usrp2/usrp2_impl.cpp b/host/lib/usrp/usrp2/usrp2_impl.cpp index 568c87a22..a680708ad 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.cpp +++ b/host/lib/usrp/usrp2/usrp2_impl.cpp @@ -124,26 +124,7 @@ static uhd::device_addrs_t usrp2_find(const device_addr_t &hint){ /*********************************************************************** * Make **********************************************************************/ -template <typename out_type, typename in_type> -out_type lexical_cast(const in_type &in){ - try{ - return boost::lexical_cast<out_type>(in); - }catch(...){ - throw std::runtime_error(str(boost::format( - "failed to cast \"%s\" to type \"%s\"" - ) % boost::lexical_cast<std::string>(in) % typeid(out_type).name())); - } -} - static device::sptr usrp2_make(const device_addr_t &device_addr){ - //extract the receive and send buffer sizes - size_t recv_buff_size = 0, send_buff_size= 0 ; - if (device_addr.has_key("recv_buff_size")){ - recv_buff_size = size_t(lexical_cast<double>(device_addr["recv_buff_size"])); - } - if (device_addr.has_key("send_buff_size")){ - send_buff_size = size_t(lexical_cast<double>(device_addr["send_buff_size"])); - } //create a ctrl and data transport for each address std::vector<udp_simple::sptr> ctrl_transports; @@ -154,8 +135,7 @@ static device::sptr usrp2_make(const device_addr_t &device_addr){ addr, num2str(USRP2_UDP_CTRL_PORT) )); data_transports.push_back(udp_zero_copy::make( - addr, num2str(USRP2_UDP_DATA_PORT), - recv_buff_size, send_buff_size + addr, num2str(USRP2_UDP_DATA_PORT), device_addr )); } @@ -178,11 +158,23 @@ usrp2_impl::usrp2_impl( ): _data_transports(data_transports) { + //setup rx otw type + _rx_otw_type.width = 16; + _rx_otw_type.shift = 0; + _rx_otw_type.byteorder = uhd::otw_type_t::BO_BIG_ENDIAN; + + //setup tx otw type + _tx_otw_type.width = 16; + _tx_otw_type.shift = 0; + _tx_otw_type.byteorder = uhd::otw_type_t::BO_BIG_ENDIAN; + + //!!!!! set the otw type here before continuing, its used below + //create a new mboard handler for each control transport for(size_t i = 0; i < ctrl_transports.size(); i++){ - _mboards.push_back(usrp2_mboard_impl::sptr( - new usrp2_mboard_impl(i, ctrl_transports[i], _io_helper) - )); + _mboards.push_back(usrp2_mboard_impl::sptr(new usrp2_mboard_impl( + i, ctrl_transports[i], this->get_max_recv_samps_per_packet() + ))); //use an empty name when there is only one mboard std::string name = (ctrl_transports.size() > 1)? boost::lexical_cast<std::string>(i) : ""; _mboard_dict[name] = _mboards.back(); diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp index 157d17057..558726a2b 100644 --- a/host/lib/usrp/usrp2/usrp2_impl.hpp +++ b/host/lib/usrp/usrp2/usrp2_impl.hpp @@ -72,54 +72,6 @@ private: }; /*! - * The io helper class encapculates the max packet sizes and otw types. - * The otw types are read-only for now, this will be reimplemented - * when it becomes possible to change the otw type in the usrp2. - */ -class usrp2_io_helper{ -public: - usrp2_io_helper(void){ - //setup rx otw type - _rx_otw_type.width = 16; - _rx_otw_type.shift = 0; - _rx_otw_type.byteorder = uhd::otw_type_t::BO_BIG_ENDIAN; - - //setup tx otw type - _tx_otw_type.width = 16; - _tx_otw_type.shift = 0; - _tx_otw_type.byteorder = uhd::otw_type_t::BO_BIG_ENDIAN; - } - - inline size_t get_max_send_samps_per_packet(void) const{ - return _max_tx_bytes_per_packet/_tx_otw_type.get_sample_size(); - } - - inline size_t get_max_recv_samps_per_packet(void) const{ - return _max_rx_bytes_per_packet/_rx_otw_type.get_sample_size(); - } - - inline const uhd::otw_type_t &get_rx_otw_type(void) const{ - return _rx_otw_type; - } - - inline const uhd::otw_type_t &get_tx_otw_type(void) const{ - return _tx_otw_type; - } - -private: - uhd::otw_type_t _rx_otw_type, _tx_otw_type; - static const size_t _max_rx_bytes_per_packet = uhd::transport::udp_simple::mtu - - uhd::transport::vrt::max_if_hdr_words32*sizeof(boost::uint32_t) - - sizeof(uhd::transport::vrt::if_packet_info_t().tlr) //forced to have trailer - + sizeof(uhd::transport::vrt::if_packet_info_t().cid) //no class id ever used - ; - static const size_t _max_tx_bytes_per_packet = uhd::transport::udp_simple::mtu - - uhd::transport::vrt::max_if_hdr_words32*sizeof(boost::uint32_t) - + sizeof(uhd::transport::vrt::if_packet_info_t().cid) //no class id ever used - ; -}; - -/*! * USRP2 mboard implementation guts: * The implementation details are encapsulated here. * Handles properties on the mboard, dboard, dsps... @@ -129,7 +81,11 @@ public: typedef boost::shared_ptr<usrp2_mboard_impl> sptr; //structors - usrp2_mboard_impl(size_t index, uhd::transport::udp_simple::sptr, const usrp2_io_helper &); + usrp2_mboard_impl( + size_t index, + uhd::transport::udp_simple::sptr, + size_t recv_frame_size + ); ~usrp2_mboard_impl(void); inline double get_master_clock_freq(void){ @@ -139,7 +95,7 @@ public: private: size_t _index; int _rev_hi, _rev_lo; - const usrp2_io_helper &_io_helper; + const size_t _recv_frame_size; //properties for this mboard void get(const wax::obj &, wax::obj &); @@ -228,23 +184,19 @@ public: ~usrp2_impl(void); //the io interface - size_t get_max_send_samps_per_packet(void) const{ - return _io_helper.get_max_send_samps_per_packet(); - } size_t send( const std::vector<const void *> &, size_t, const uhd::tx_metadata_t &, const uhd::io_type_t &, - uhd::device::send_mode_t + uhd::device::send_mode_t, double ); - size_t get_max_recv_samps_per_packet(void) const{ - return _io_helper.get_max_recv_samps_per_packet(); - } size_t recv( const std::vector<void *> &, size_t, uhd::rx_metadata_t &, const uhd::io_type_t &, - uhd::device::recv_mode_t, size_t + uhd::device::recv_mode_t, double ); - bool recv_async_msg(uhd::async_metadata_t &, size_t); + size_t get_max_send_samps_per_packet(void) const; + size_t get_max_recv_samps_per_packet(void) const; + bool recv_async_msg(uhd::async_metadata_t &, double); private: //device properties interface @@ -257,7 +209,7 @@ private: //io impl methods and members std::vector<uhd::transport::udp_zero_copy::sptr> _data_transports; - const usrp2_io_helper _io_helper; + uhd::otw_type_t _rx_otw_type, _tx_otw_type; UHD_PIMPL_DECL(io_impl) _io_impl; void io_init(void); }; diff --git a/host/lib/version.cpp b/host/lib/version.cpp index 5edbca09b..93fdecb1a 100644 --- a/host/lib/version.cpp +++ b/host/lib/version.cpp @@ -21,3 +21,17 @@ std::string uhd::get_version_string(void){ return UHD_VERSION_STRING; } + +#include <uhd/utils/static.hpp> +#include <boost/version.hpp> +#include <iostream> + +UHD_STATIC_BLOCK(print_system_info){ + std::cout + << BOOST_PLATFORM << "; " + << BOOST_COMPILER << "; " + << "Boost_" << BOOST_VERSION << "; " + << "UHD_" << uhd::get_version_string() + << std::endl << std::endl + ; +} diff --git a/host/test/buffer_test.cpp b/host/test/buffer_test.cpp index aadb3f951..8445412e7 100644 --- a/host/test/buffer_test.cpp +++ b/host/test/buffer_test.cpp @@ -23,7 +23,7 @@ using namespace boost::assign; using namespace uhd::transport; -static const boost::posix_time::milliseconds timeout(10); +static const double timeout = 0.01/*secs*/; BOOST_AUTO_TEST_CASE(test_bounded_buffer_with_timed_wait){ bounded_buffer<int>::sptr bb(bounded_buffer<int>::make(3)); |