diff options
| -rw-r--r-- | host/lib/usrp/dboard/db_wbx.cpp | 18 |
1 files changed, 11 insertions, 7 deletions
diff --git a/host/lib/usrp/dboard/db_wbx.cpp b/host/lib/usrp/dboard/db_wbx.cpp index 16bbf7719..788099a90 100644 --- a/host/lib/usrp/dboard/db_wbx.cpp +++ b/host/lib/usrp/dboard/db_wbx.cpp @@ -15,7 +15,7 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -static const bool wbx_debug = true; +static const bool wbx_debug = false; // Common IO Pins #define ANTSW_IO ((1 << 5)|(1 << 15)) // on UNIT_TX, 0 = TX, 1 = RX, on UNIT_RX 0 = main ant, 1 = RX2 @@ -264,6 +264,10 @@ void wbx_xcvr::set_tx_pga0_gain(float gain){ //calculate the voltage for the aux dac float dac_volts = gain*slope + min_volts; + if (wbx_debug) std::cerr << boost::format( + "WBX TX Gain: %f dB, dac_volts: %f V" + ) % gain % dac_volts << std::endl; + //write the new voltage to the aux dac this->get_iface()->write_aux_dac(dboard_iface::UNIT_TX, 0, dac_volts); @@ -344,7 +348,7 @@ double wbx_xcvr::set_lo_freq( if (pfd_freq > 25e6) continue; //ignore fractional part of tuning - N = int(std::ceil(vco_freq/pfd_freq)); + N = int(std::floor(vco_freq/pfd_freq)); //keep N > minimum int divider requirement if (N < prescaler_to_min_int_div[prescaler]) continue; @@ -359,7 +363,7 @@ double wbx_xcvr::set_lo_freq( //Fractional-N calculation MOD = 4095; //max fractional accuracy - FRAC = int((N - vco_freq/pfd_freq)*MOD); + FRAC = int((vco_freq/pfd_freq - N)*MOD); //Reference divide-by-2 for 50% duty cycle // if R even, move one divide by 2 to to regs.reference_divide_by_2 @@ -369,9 +373,9 @@ double wbx_xcvr::set_lo_freq( } //actual frequency calculation - actual_freq = double((N - (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))/RFdiv/2); + actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))/RFdiv/2); - std::cerr << boost::format("WBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % (double(FRAC)/double(MOD)) << std::endl; + std::cerr << boost::format("WBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl; if (wbx_debug) std::cerr << boost::format("WBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d, LD=%d" @@ -467,7 +471,7 @@ void wbx_xcvr::rx_get(const wax::obj &key_, wax::obj &val){ return; case SUBDEV_PROP_IQ_SWAPPED: - val = true; + val = false; return; case SUBDEV_PROP_SPECTRUM_INVERTED: @@ -570,7 +574,7 @@ void wbx_xcvr::tx_get(const wax::obj &key_, wax::obj &val){ return; case SUBDEV_PROP_USE_LO_OFFSET: - val = true; + val = false; return; case SUBDEV_PROP_LO_LOCKED: |