diff options
| -rw-r--r-- | usrp2/gpif/slave_fifo.v | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/usrp2/gpif/slave_fifo.v b/usrp2/gpif/slave_fifo.v index 2f747ba71..a8101d376 100644 --- a/usrp2/gpif/slave_fifo.v +++ b/usrp2/gpif/slave_fifo.v @@ -99,6 +99,7 @@ module slave_fifo localparam STATE_CTRL_TX_SLOE = 8; localparam STATE_DATA_RX_ADR = 1; localparam STATE_CTRL_RX_ADR = 4; + localparam STATE_PKTEND_ADR = 10; localparam STATE_PKTEND = 7; //logs the last bus user for xfer fairness @@ -133,7 +134,7 @@ module slave_fifo else if(data_rx_src_rdy & ~FX2_DF) state <= STATE_DATA_RX_ADR; else if(~data_rx_src_rdy & ~dsp_rx_run & pktend_latch & ~FX2_DF) - state <= STATE_PKTEND; + state <= STATE_PKTEND_ADR; if(data_rx_src_rdy) pktend_latch <= 1; @@ -158,6 +159,11 @@ module slave_fifo last_data_bus_hog <= BUS_HOG_RX; end + STATE_PKTEND_ADR: + begin + state <= STATE_PKTEND; + end + STATE_PKTEND: begin state <= STATE_IDLE; @@ -214,7 +220,7 @@ module slave_fifo // {0,1}: EP4, ctrl TX from host // {1,0}: EP6, data RX to host // {1,1}: EP8, ctrl RX to host - assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND), + assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND) | (state == STATE_PKTEND_ADR), (state == STATE_CTRL_RX) | (state == STATE_CTRL_RX_ADR) | (state == STATE_CTRL_TX) | (state == STATE_CTRL_TX_SLOE)}; //set sloe, slwr, slrd (all active low) //SLOE gets asserted when we want data from the FX2; i.e., TX mode |