diff options
| -rw-r--r-- | host/include/uhd/transport/usb_control.hpp | 4 | ||||
| -rw-r--r-- | host/lib/transport/libusb1_control.cpp | 2 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/usrp1_ctrl.cpp | 7 | ||||
| -rw-r--r-- | host/lib/usrp/usrp1/usrp1_impl.cpp | 15 |
4 files changed, 14 insertions, 14 deletions
diff --git a/host/include/uhd/transport/usb_control.hpp b/host/include/uhd/transport/usb_control.hpp index 6137ecf84..f9829c3ec 100644 --- a/host/include/uhd/transport/usb_control.hpp +++ b/host/include/uhd/transport/usb_control.hpp @@ -50,9 +50,9 @@ public: * \param index 2-byte (wIndex) * \param buff buffer to hold send or receive data * \param length 2-byte (wLength) - * \return number of bytes submitted + * \return number of bytes submitted or error code */ - virtual size_t submit(boost::uint8_t request_type, + virtual ssize_t submit(boost::uint8_t request_type, boost::uint8_t request, boost::uint16_t value, boost::uint16_t index, diff --git a/host/lib/transport/libusb1_control.cpp b/host/lib/transport/libusb1_control.cpp index c989a788c..f903907d0 100644 --- a/host/lib/transport/libusb1_control.cpp +++ b/host/lib/transport/libusb1_control.cpp @@ -33,7 +33,7 @@ public: _handle->claim_interface(0 /* control interface */); } - size_t submit(boost::uint8_t request_type, + ssize_t submit(boost::uint8_t request_type, boost::uint8_t request, boost::uint16_t value, boost::uint16_t index, diff --git a/host/lib/usrp/usrp1/usrp1_ctrl.cpp b/host/lib/usrp/usrp1/usrp1_ctrl.cpp index 76e8ce368..5d73e6dd9 100644 --- a/host/lib/usrp/usrp1/usrp1_ctrl.cpp +++ b/host/lib/usrp/usrp1/usrp1_ctrl.cpp @@ -209,9 +209,9 @@ public: } //type 0x01 is end else if (type == 0x01) { + usrp_set_firmware_hash(hash); //set hash before reset usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0, &reset_n, 1); - usrp_set_firmware_hash(hash); file.close(); //wait for things to settle @@ -267,8 +267,9 @@ public: return -1; } - ssize_t n; - while ((n = file.readsome((char *)buf, sizeof(buf))) > 0) { + while (not file.eof()) { + file.read((char *)buf, sizeof(buf)); + size_t n = file.gcount(); ret = usrp_control_write(VRQ_FPGA_LOAD, 0, FL_XFER, buf, n); if (ret != n) { diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index 80ea49e9d..b4c23bf12 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -74,14 +74,14 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) boost::uint16_t vid = hint.has_key("uninit") ? FX2_VENDOR_ID : USRP1_VENDOR_ID; boost::uint16_t pid = hint.has_key("uninit") ? FX2_PRODUCT_ID : USRP1_PRODUCT_ID; - //see what we got on the USB bus - std::vector<usb_device_handle::sptr> device_list = - usb_device_handle::get_device_list(vid, pid); - - if(device_list.size() == 0) return usrp1_addrs; //return nothing if no USRPs found + // Important note: + // The get device list calls are nested inside the for loop. + // This allows the usb guts to decontruct when not in use, + // so that re-enumeration after fw load can occur successfully. + // This requirement is a courtesy of libusb1.0 on windows. //find the usrps and load firmware - BOOST_FOREACH(usb_device_handle::sptr handle, device_list) { + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { usb_control::sptr ctrl_transport = usb_control::make(handle); usrp_ctrl::sptr usrp_ctrl = usrp_ctrl::make(ctrl_transport); usrp_ctrl->usrp_load_firmware(usrp1_fw_image); @@ -90,9 +90,8 @@ static device_addrs_t usrp1_find(const device_addr_t &hint) //get descriptors again with serial number, but using the initialized VID/PID now since we have firmware vid = USRP1_VENDOR_ID; pid = USRP1_PRODUCT_ID; - device_list = usb_device_handle::get_device_list(vid, pid); - BOOST_FOREACH(usb_device_handle::sptr handle, device_list) { + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { device_addr_t new_addr; new_addr["type"] = "usrp1"; new_addr["serial"] = handle->get_serial(); |