diff options
| -rw-r--r-- | usrp2/top/u1e/u1e.v | 54 |
1 files changed, 46 insertions, 8 deletions
diff --git a/usrp2/top/u1e/u1e.v b/usrp2/top/u1e/u1e.v index 3018ff100..523aae1b9 100644 --- a/usrp2/top/u1e/u1e.v +++ b/usrp2/top/u1e/u1e.v @@ -1,6 +1,8 @@ `timescale 1ns / 1ps ////////////////////////////////////////////////////////////////////////////////// +//`define DCM 1 + module u1e (input CLK_FPGA_P, input CLK_FPGA_N, // Diff output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, @@ -26,7 +28,7 @@ module u1e inout [15:0] io_tx, inout [15:0] io_rx, - output reg [13:0] TX, output reg TXSYNC, output TXBLANK, + output [13:0] TX, output TXSYNC, output TXBLANK, input [11:0] DA, input [11:0] DB, input RXSYNC, input PPS_IN @@ -34,11 +36,13 @@ module u1e // ///////////////////////////////////////////////////////////////////////// // Clocking - wire clk_fpga, clk_fpga_in, clk_2x, dcm_rst, dcm_locked; + wire clk_fpga, clk_fpga_in; IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); +`ifdef DCM + wire clk_2x, dcm_rst, dcm_locked; DCM #(.CLK_FEEDBACK ( "1X" ), .CLKDV_DIVIDE ( 2.0 ), .CLKFX_DIVIDE ( 1 ), @@ -59,11 +63,10 @@ module u1e .CLK2X(clk_2x), .CLK2X180(), .CLK0(clk_fpga), .CLK90(), .CLK180(), .CLK270(), .LOCKED(dcm_locked), .STATUS()); - - //BUFG dspclk_BUFG (.I(dcm_out), .O(dsp_clk)); - //BUFG wbclk_BUFG (.I(clk_div), .O(wb_clk)); - - +`else // !`ifdef DCM + BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); +`endif // !`ifdef DCM + // ///////////////////////////////////////////////////////////////////////// // SPI wire mosi, sclk, miso; @@ -79,6 +82,10 @@ module u1e assign TXBLANK = 0; wire [13:0] tx_i, tx_q; + +`ifdef DCM + reg [13:0] TX; + reg TXSYNC; always @(posedge clk_2x) if(clk_fpga) @@ -91,7 +98,38 @@ module u1e TX <= tx_q; TXSYNC <= 1; end - +`else // !`ifdef DCM + genvar i; + generate + for(i=0;i<14;i=i+1) + begin : gen_dacout + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_inst (.Q(TX[i]), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(tx_i[i]), // 1-bit data input (associated with C0) + .D1(tx_q[i]), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_dacout + endgenerate + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(1'b0), // 1-bit data input (associated with C0) + .D1(1'b1), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + +`endif // !`ifdef DCM + // ///////////////////////////////////////////////////////////////////////// // Main U1E Core u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(~debug_pb[2]), |