diff options
| -rwxr-xr-x | usrp2/top/u2_core/u2_core.v | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/usrp2/top/u2_core/u2_core.v b/usrp2/top/u2_core/u2_core.v index dea18b737..df74c7dba 100755 --- a/usrp2/top/u2_core/u2_core.v +++ b/usrp2/top/u2_core/u2_core.v @@ -448,13 +448,13 @@ module u2_core wire phy_reset; assign PHY_RESETn = ~phy_reset; - setting_reg #(.my_addr(0)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), + setting_reg #(.my_addr(0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), .in(set_data),.out(clock_outs),.changed()); - setting_reg #(.my_addr(1)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(serdes_outs),.changed()); - setting_reg #(.my_addr(2)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(adc_outs),.changed()); - setting_reg #(.my_addr(4)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(phy_reset),.changed()); // ///////////////////////////////////////////////////////////////////////// @@ -466,9 +466,9 @@ module u2_core wire [7:0] led_src, led_sw; wire [7:0] led_hw = {clk_status,serdes_link_up}; - setting_reg #(.my_addr(3)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_sw),.changed()); - setting_reg #(.my_addr(8)) sr_led_src (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(8),.width(8)) sr_led_src (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed()); assign leds = (led_src & led_hw) | (~led_src & led_sw); @@ -481,7 +481,7 @@ module u2_core {4'b0, clk_status, serdes_link_up, uart_tx_int, uart_rx_int}, {pps_int,overrun,underrun,PHY_INTn,i2c_int,spi_int,timer_int,buffer_int}}; - pic pic(.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[3:2]), + pic pic(.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[4:2]), .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int), .irq(irq) ); @@ -614,7 +614,7 @@ module u2_core wire [19:0] page; wire [19:0] wb_ram_adr = {page[19:PAGE_SIZE],bridge_adr[PAGE_SIZE-1:0]}; - setting_reg #(.my_addr(6)) sr_page (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + setting_reg #(.my_addr(6),.width(20)) sr_page (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(page),.changed()); wb_bridge_16_32 bridge |