diff options
147 files changed, 20098 insertions, 0 deletions
@@ -1,3 +1,4 @@ +#!/bin/sh # # Copyright 2010 Ettus Research LLC # diff --git a/firmware/microblaze/.gitignore b/firmware/microblaze/.gitignore new file mode 100644 index 000000000..2381f1328 --- /dev/null +++ b/firmware/microblaze/.gitignore @@ -0,0 +1,40 @@ +/*-stamp +/*.a +/*.bin +/*.dump +/*.log +/*.rom +/.deps +/Makefile +/Makefile.in +/aclocal.m4 +/autom4te.cache +/blink_leds +/blink_leds2 +/build +/compile +/config.h +/config.h.in +/config.log +/config.status +/configure +/depcomp +/eth_test +/gen_eth_packets +/ibs_rx_test +/ibs_tx_test +/install-sh +/libtool +/ltmain.sh +/missing +/py-compile +/rcv_eth_packets +/run_tests.sh +/stamp-h1 +/test1 +/test_phy_comm +/timer_test +/buf_ram_test +/buf_ram_zero +/hello +/configure.lineno diff --git a/firmware/microblaze/AUTHORS b/firmware/microblaze/AUTHORS new file mode 100644 index 000000000..c365261f8 --- /dev/null +++ b/firmware/microblaze/AUTHORS @@ -0,0 +1,3 @@ +Eric Blossom <eb@comsec.com> +Matt Ettus <matt@ettus.com> +Josh Blum <josh@ettus.com> diff --git a/firmware/microblaze/COPYING b/firmware/microblaze/COPYING new file mode 100644 index 000000000..94a9ed024 --- /dev/null +++ b/firmware/microblaze/COPYING @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + <program> Copyright (C) <year> <name of author> + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +<http://www.gnu.org/licenses/>. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/firmware/microblaze/ChangeLog b/firmware/microblaze/ChangeLog new file mode 100644 index 000000000..8b1378917 --- /dev/null +++ b/firmware/microblaze/ChangeLog @@ -0,0 +1 @@ + diff --git a/firmware/microblaze/INSTALL b/firmware/microblaze/INSTALL new file mode 100644 index 000000000..5458714e1 --- /dev/null +++ b/firmware/microblaze/INSTALL @@ -0,0 +1,234 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006 Free Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + +Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + +You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + +Installation Names +================== + +By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + +Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + +Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + +`configure' recognizes the following options to control how it operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/firmware/microblaze/Makefile.am b/firmware/microblaze/Makefile.am new file mode 100644 index 000000000..fbb0abe57 --- /dev/null +++ b/firmware/microblaze/Makefile.am @@ -0,0 +1,26 @@ +# Copyright 2010 Ettus Research LLC +# +# Copyright 2007,2008 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(top_srcdir)/Makefile.common + +EXTRA_DIST = \ + u2_flash_tool + +SUBDIRS = include lib apps + + diff --git a/firmware/microblaze/Makefile.common b/firmware/microblaze/Makefile.common new file mode 100644 index 000000000..b291df967 --- /dev/null +++ b/firmware/microblaze/Makefile.common @@ -0,0 +1,62 @@ +# +# Copyright 2010 Ettus Research LLC +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +STD_INCLUDES = -I$(top_srcdir)/include -I$(top_srcdir)/lib + +#HAL_IO = -DHAL_IO_USES_DBOARD_PINS +HAL_IO = -DHAL_IO_USES_UART + +AM_CPPFLAGS = $(HAL_IO) $(STD_INCLUDES) + +STD_CFLAGS = --std=gnu99 -Wall -Werror-implicit-function-declaration -mxl-soft-div -msoft-float + +MB_CFLAGS = -mxl-soft-mul -mxl-barrel-shift + +AM_CFLAGS = $(STD_CFLAGS) $(MB_CFLAGS) +#AM_CFLAGS = $(STD_CFLAGS) -mxl-soft-mul -mxl-barrel-shift -mxl-gp-opt -G 16384 + + +#LINKER_SCRIPT = $(top_srcdir)/lib/microblaze.ld +#AM_LDFLAGS = -Wl,-T,$(LINKER_SCRIPT) -Wl,-defsym -Wl,_STACK_SIZE=1024 +#AM_LDFLAGS = -Wl,-T,$(LINKER_SCRIPT) -Wl,-Map -Wl,$@.map +#AM_LDFLAGS = -Wl,-T,$(LINKER_SCRIPT) +AM_LDFLAGS = -Wl,-Map -Wl,$@.map -Wl,-defsym -Wl,_STACK_SIZE=3072 +#AM_LDFLAGS = -Wl,-defsym -Wl,_STACK_SIZE=2048 + + +%.bin : % + mb-objcopy -O binary $< $@ + +%.dump : % + mb-objdump -DSC $< > $@ + +%.rom : %.bin + hexdump -v -e'1/1 "%.2X\n"' $< > $@ + + +#.PRECIOUS : %.bin + + +BINS = $(noinst_PROGRAMS:=.bin) +ROMS = $(noinst_PROGRAMS:=.rom) +DUMPS = $(noinst_PROGRAMS:=.dump) + +noinst_DATA = $(BINS) $(ROMS) $(DUMPS) + +CLEANFILES = $(ROMS) $(DUMPS) $(BINS) diff --git a/firmware/microblaze/NEWS b/firmware/microblaze/NEWS new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/firmware/microblaze/NEWS diff --git a/firmware/microblaze/README b/firmware/microblaze/README new file mode 100644 index 000000000..1479ffe1f --- /dev/null +++ b/firmware/microblaze/README @@ -0,0 +1,3 @@ +./bootstrap +./configure --host=mb +make diff --git a/firmware/microblaze/apps/.gitignore b/firmware/microblaze/apps/.gitignore new file mode 100644 index 000000000..b8ab0dc8d --- /dev/null +++ b/firmware/microblaze/apps/.gitignore @@ -0,0 +1,77 @@ +/*-stamp +/*.a +/*.bin +/*.dump +/*.log +/*.rom +/*.map +/.deps +/Makefile +/Makefile.in +/aclocal.m4 +/autom4te.cache +/blink_leds +/blink_leds2 +/build +/compile +/config.h +/config.h.in +/config.log +/config.status +/configure +/depcomp +/echo +/eth_test +/gen_eth_packets +/ibs_rx_test +/ibs_tx_test +/install-sh +/libtool +/ltmain.sh +/missing +/py-compile +/rcv_eth_packets +/run_tests.sh +/stamp-h1 +/test1 +/test_phy_comm +/timer_test +/buf_ram_test +/buf_ram_zero +/hello +/test_printf +/test_spi +/test_i2c +/gen_pause_frames +/test_serdes +/rx_only +/tx_only +/tx_standalone +/tx_drop +/tx_drop2 +/tx_drop_rate_limited +/test_lsdac +/test_lsadc +/read_dbids +/test_db_spi +/ramp_lsdac +/eth_to_serdes +/serdes_to_dsp +/sd_gentest +/sd_bounce +/can_i_sub +/tx_only_v2 +/rx_only_v2 +/txrx +/eth_serdes +/serdes_txrx +/set_hw_rev +/test_sd +/factory_test +/test_ram +/mimo_tx +/mimo_tx_slave +/burn_dbsrx_eeprom +/burnrev30 +/burnrev31 +/burnrev40 diff --git a/firmware/microblaze/apps/Makefile.am b/firmware/microblaze/apps/Makefile.am new file mode 100644 index 000000000..91e83b90a --- /dev/null +++ b/firmware/microblaze/apps/Makefile.am @@ -0,0 +1,76 @@ +# +# Copyright 2007,2008 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(top_srcdir)/Makefile.common + +LDADD = ../lib/libu2fw.a + +noinst_PROGRAMS = \ + blink_leds \ + blink_leds2 \ + buf_ram_test \ + burn_dbsrx_eeprom \ + can_i_sub \ + echo \ + hello \ + read_dbids \ + set_hw_rev \ + test1 \ + test_db_spi \ + test_i2c \ + test_sd \ + test_ram \ + test_phy_comm \ + test_lsadc \ + test_lsdac \ + timer_test \ + txrx \ + burnrev30 \ + burnrev31 \ + burnrev40 \ + sd_gentest \ + sd_bounce + +#nononono = \ +# eth_serdes \ +# gen_eth_packets \ +# rcv_eth_packets \ +# tx_standalone \ +# factory_test \ +# serdes_txrx \ +# mimo_tx \ +# mimo_tx_slave \ +# ibs_rx_test \ +# ibs_tx_test + +# tx_drop_SOURCES = tx_drop.c app_common.c +# tx_drop_rate_limited_SOURCES = tx_drop_rate_limited.c app_common.c +# tx_drop2_SOURCES = tx_drop2.c app_common.c +txrx_SOURCES = txrx.c app_common_v2.c +factory_test_SOURCES = factory_test.c app_common_v2.c +eth_serdes_SOURCES = eth_serdes.c app_passthru_v2.c +serdes_txrx_SOURCES = serdes_txrx.c app_common_v2.c +mimo_tx_SOURCES = mimo_tx.c mimo_app_common_v2.c +mimo_tx_slave_SOURCES = mimo_tx_slave.c app_common_v2.c + +noinst_HEADERS = \ + app_common_v2.h \ + app_passthru_v2.h \ + mimo_app_common_v2.h + + +MOSTLYCLEANFILES = *.map diff --git a/firmware/microblaze/apps/app_common_v2.c b/firmware/microblaze/apps/app_common_v2.c new file mode 100644 index 000000000..e409c77db --- /dev/null +++ b/firmware/microblaze/apps/app_common_v2.c @@ -0,0 +1,716 @@ +// +// Copyright 2010 Ettus Research LLC +// +/* -*- c++ -*- */ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "app_common_v2.h" +#include "buffer_pool.h" +#include "memcpy_wa.h" +#include "ethernet.h" +#include "nonstdio.h" +#include "print_rmon_regs.h" +#include "db.h" +#include "db_base.h" +#include "clocks.h" +#include "u2_init.h" +#include <string.h> +#include <stddef.h> + +volatile bool link_is_up = false; // eth handler sets this +int cpu_tx_buf_dest_port = PORT_ETH; + +// If this is non-zero, this dbsm could be writing to the ethernet +dbsm_t *ac_could_be_sending_to_eth; + +static unsigned char exp_seqno __attribute__((unused)) = 0; + +static bool +set_time(const op_set_time_t *p) +{ + //printf("Setting time: secs %u, ticks %u\n", p->time_secs, p->time_ticks); + //sr_time64->secs = p->time_secs; //set below... + sr_time64->ticks = p->time_ticks; + switch (p->type){ + case OP_SET_TIME_TYPE_NOW: + sr_time64->imm = 1; + break; + case OP_SET_TIME_TYPE_PPS: + sr_time64->imm = 0; + break; + } + sr_time64->secs = p->time_secs; //set this last to latch the regs + return true; +} + +static inline bool +config_clock_cmd(const op_config_clock_t *p) +{ + //handle the 10 mhz ref source + clocks_mimo_config(p->flags & MC_REF_CLK_MASK); + + //handle the pps config + uint32_t pps_flags = 0; + if (p->flags & MC_PPS_POLARITY_NEG) pps_flags |= 0x00 << 0; + if (p->flags & MC_PPS_POLARITY_POS) pps_flags |= 0x01 << 0; + if (p->flags & MC_PPS_SOURCE_SMA) pps_flags |= 0x00 << 1; + if (p->flags & MC_PPS_SOURCE_MIMO) pps_flags |= 0x01 << 1; + sr_time64->flags = pps_flags; + + return true; +} + +static size_t +op_id_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_id_reply_t *r = (op_id_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) // no room + return 0; + + // Build reply subpacket + + r->opcode = OP_ID_REPLY; + r->len = sizeof(op_id_reply_t); + r->rid = p->rid; + r->addr = *ethernet_mac_addr(); + r->hw_rev = (u2_hw_rev_major << 8) | u2_hw_rev_minor; + // r->fpga_md5sum = ; // FIXME + // r->sw_md5sum = ; // FIXME + + return r->len; +} + + +static size_t +config_tx_v2_cmd(const op_config_tx_v2_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_config_tx_reply_v2_t *r = (op_config_tx_reply_v2_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + struct tune_result tune_result; + memset(&tune_result, 0, sizeof(tune_result)); + + bool ok = true; + + if (p->valid & CFGV_GAIN){ + ok &= db_set_gain(tx_dboard, p->gain); + } + + if (p->valid & CFGV_FREQ){ + bool was_streaming = is_streaming(); + if (was_streaming) + stop_rx_cmd(); + + u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); + bool tune_ok = db_tune(tx_dboard, f, &tune_result); + ok &= tune_ok; + print_tune_result("Tx", tune_ok, f, &tune_result); + + if (was_streaming) + restart_streaming(); + } + + if (p->valid & CFGV_INTERP_DECIM){ + int interp = p->interp; + int hb1 = 0; + int hb2 = 0; + + if (!(interp & 1)){ + hb2 = 1; + interp = interp >> 1; + } + + if (!(interp & 1)){ + hb1 = 1; + interp = interp >> 1; + } + + if (interp < MIN_CIC_INTERP || interp > MAX_CIC_INTERP) + ok = false; + else { + dsp_tx_regs->interp_rate = (hb1<<9) | (hb2<<8) | interp; + // printf("Interp: %d, register %d\n", p->interp, (hb1<<9) | (hb2<<8) | interp); + } + } + + if (p->valid & CFGV_SCALE_IQ){ + dsp_tx_regs->scale_iq = p->scale_iq; + } + + // Build reply subpacket + + r->opcode = OP_CONFIG_TX_REPLY_V2; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + r->inverted = tune_result.inverted; + r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); + r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); + r->duc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); + r->duc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); + r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); + r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); + return r->len; +} + +static size_t +config_rx_v2_cmd(const op_config_rx_v2_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_config_rx_reply_v2_t *r = (op_config_rx_reply_v2_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + struct tune_result tune_result; + memset(&tune_result, 0, sizeof(tune_result)); + + bool ok = true; + + if (p->valid & CFGV_GAIN){ + ok &= db_set_gain(rx_dboard, p->gain); + } + + if (p->valid & CFGV_FREQ){ + bool was_streaming = is_streaming(); + if (was_streaming) + stop_rx_cmd(); + + u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); + bool tune_ok = db_tune(rx_dboard, f, &tune_result); + ok &= tune_ok; + print_tune_result("Rx", tune_ok, f, &tune_result); + + if (was_streaming) + restart_streaming(); + } + + if (p->valid & CFGV_INTERP_DECIM){ + int decim = p->decim; + int hb1 = 0; + int hb2 = 0; + + if(!(decim & 1)) { + hb2 = 1; + decim = decim >> 1; + } + + if(!(decim & 1)) { + hb1 = 1; + decim = decim >> 1; + } + + if (decim < MIN_CIC_DECIM || decim > MAX_CIC_DECIM) + ok = false; + else { + dsp_rx_regs->decim_rate = (hb1<<9) | (hb2<<8) | decim; + // printf("Decim: %d, register %d\n", p->decim, (hb1<<9) | (hb2<<8) | decim); + } + } + + if (p->valid & CFGV_SCALE_IQ){ + dsp_rx_regs->scale_iq = p->scale_iq; + } + + // Build reply subpacket + + r->opcode = OP_CONFIG_RX_REPLY_V2; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + r->inverted = tune_result.inverted; + r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); + r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); + r->ddc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); + r->ddc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); + r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); + r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); + + return r->len; +} + +static void +fill_db_info(u2_db_info_t *p, const struct db_base *db) +{ + p->dbid = db->dbid; + p->freq_min_hi = u2_fxpt_freq_hi(db->freq_min); + p->freq_min_lo = u2_fxpt_freq_lo(db->freq_min); + p->freq_max_hi = u2_fxpt_freq_hi(db->freq_max); + p->freq_max_lo = u2_fxpt_freq_lo(db->freq_max); + p->gain_min = db->gain_min; + p->gain_max = db->gain_max; + p->gain_step_size = db->gain_step_size; +} + +static size_t +dboard_info_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_dboard_info_reply_t *r = (op_dboard_info_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_DBOARD_INFO_REPLY; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = true; + + fill_db_info(&r->tx_db_info, tx_dboard); + fill_db_info(&r->rx_db_info, rx_dboard); + + return r->len; +} + +static size_t +peek_cmd(const op_peek_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + + //putstr("peek: addr="); puthex32(p->addr); + //printf(" bytes=%u\n", p->bytes); + + if ((reply_payload_space < (sizeof(*r) + p->bytes)) || + p->bytes > MAX_SUBPKT_LEN - sizeof(op_generic_t)) { + putstr("peek: insufficient reply packet space\n"); + return 0; // FIXME do partial read? + } + + r->opcode = OP_PEEK_REPLY; + r->len = sizeof(*r)+p->bytes; + r->rid = p->rid; + r->ok = true; + + memcpy_wa(reply_payload+sizeof(*r), (void *)p->addr, p->bytes); + + return r->len; +} + +static bool +poke_cmd(const op_poke_t *p) +{ + int bytes = p->len - sizeof(*p); + //putstr("poke: addr="); puthex32(p->addr); + //printf(" bytes=%u\n", bytes); + + uint8_t *src = (uint8_t *)p + sizeof(*p); + memcpy_wa((void *)p->addr, src, bytes); + + return true; +} + +static bool +set_lo_offset_cmd(const op_freq_t *p) +{ + u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); + if (p->opcode == OP_SET_TX_LO_OFFSET) + return db_set_lo_offset(tx_dboard, f); + else + return db_set_lo_offset(rx_dboard, f); +} + +static size_t +gpio_read_cmd(const op_gpio_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_gpio_read_reply_t *r = (op_gpio_read_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) // no room + return 0; + + // Build reply subpacket + + r->opcode = OP_GPIO_READ_REPLY; + r->len = sizeof(op_gpio_read_reply_t); + r->rid = p->rid; + r->ok = true; + r->mbz = 0; + r->value = hal_gpio_read(p->bank); + + return r->len; +} + +static size_t +generic_reply(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space, + bool ok) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = p->opcode | OP_REPLY_BIT; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + + return r->len; +} + +static size_t +add_eop(void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_EOP; + r->len = sizeof(*r); + r->rid = 0; + r->ok = 0; + + return r->len; +} + +/*********************************************************************** + * Global vars to make the control replies + **********************************************************************/ +#define REPLY_PAYLOAD_MAX_LEN (4 * sizeof(u2_subpkt_t)) +uint16_t host_dst_udp_port; +uint16_t host_src_udp_port; +struct in_addr host_dst_ip_addr; +struct in_addr host_src_ip_addr; +eth_mac_addr_t host_dst_mac_addr; +eth_mac_addr_t host_src_mac_addr; + +/*********************************************************************** + * Handle input control data and produce output control data + **********************************************************************/ +static size_t handle_control_packets( + const void *data_in, size_t len_in, void *data_out +){ + // point to the begining of outgoing payload (subpackets) + uint8_t *reply_payload = data_out; + size_t reply_payload_space = REPLY_PAYLOAD_MAX_LEN; + + // point to beginning of incoming payload (subpackets) + uint8_t *payload = (uint8_t *)data_in; + size_t payload_len = len_in; + + size_t subpktlen = 0; + bool ok = false; + + while (payload_len >= sizeof(op_generic_t)){ + const op_generic_t *gp = (const op_generic_t *) payload; + subpktlen = 0; + + // printf("\nopcode = %d\n", gp->opcode); + + switch(gp->opcode){ + case OP_EOP: // end of subpackets + goto end_of_subpackets; + + case OP_ID: + subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_CONFIG_TX_V2: + subpktlen = config_tx_v2_cmd((op_config_tx_v2_t *) payload, reply_payload, reply_payload_space); + break; + + case OP_CONFIG_RX_V2: + subpktlen = config_rx_v2_cmd((op_config_rx_v2_t *) payload, reply_payload, reply_payload_space); + break; + + case OP_START_RX_STREAMING: + start_rx_streaming_cmd((op_start_rx_streaming_t *) payload); + ok = true; + goto generic_reply; + + case OP_STOP_RX: + stop_rx_cmd(); + ok = true; + goto generic_reply; + + case OP_BURN_MAC_ADDR: + ok = ethernet_set_mac_addr(&((op_burn_mac_addr_t *)payload)->addr); + goto generic_reply; + + case OP_CONFIG_CLOCK: + ok = config_clock_cmd((op_config_clock_t *) payload); + goto generic_reply; + + case OP_DBOARD_INFO: + subpktlen = dboard_info_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_SET_TIME: + ok = set_time((op_set_time_t *) payload); + goto generic_reply; + + case OP_PEEK: + subpktlen = peek_cmd((op_peek_t *)payload, reply_payload, reply_payload_space); + break; + + case OP_POKE: + ok = poke_cmd((op_poke_t *)payload); + goto generic_reply; + + case OP_SET_TX_LO_OFFSET: + case OP_SET_RX_LO_OFFSET: + ok = set_lo_offset_cmd((op_freq_t *)payload); + goto generic_reply; + + case OP_RESET_DB: + db_init(); + ok = true; + goto generic_reply; + + case OP_GPIO_SET_DDR: + ok = true; + hal_gpio_set_ddr(((op_gpio_t *)payload)->bank, + ((op_gpio_t *)payload)->value, + ((op_gpio_t *)payload)->mask); + goto generic_reply; + + case OP_GPIO_SET_SELS: + ok = true; + hal_gpio_set_sels(((op_gpio_set_sels_t *)payload)->bank, + (char *)(&((op_gpio_set_sels_t *)payload)->sels)); + goto generic_reply; + + case OP_GPIO_READ: + subpktlen = gpio_read_cmd((op_gpio_t *) payload, reply_payload, reply_payload_space); + break; + + case OP_GPIO_WRITE: + ok = true; + hal_gpio_write(((op_gpio_t *)payload)->bank, + ((op_gpio_t *)payload)->value, + ((op_gpio_t *)payload)->mask); + goto generic_reply; + + case OP_GPIO_STREAM: + ok = true; + dsp_rx_regs->gpio_stream_enable = (uint32_t)((op_gpio_t *)payload)->value; + goto generic_reply; + + // Add new opcode handlers here + + generic_reply: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, ok); + break; + + default: + printf("app_common_v2: unhandled opcode = %d\n", gp->opcode); + break; + } + + int t = (gp->len + 3) & ~3; // bump to a multiple of 4 + payload += t; + payload_len -= t; + + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + } + + end_of_subpackets: + + // add the EOP marker + subpktlen = add_eop(reply_payload, reply_payload_space); + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + + // how big the payload? + return REPLY_PAYLOAD_MAX_LEN - reply_payload_space; +} + +static void +send_reply(void *reply, size_t reply_len) +{ + if (reply_len < 64) reply_len = 64; + + // wait for buffer to become idle + hal_set_leds(0x4, 0x4); + while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) + ; + hal_set_leds(0x0, 0x4); + + // copy reply into CPU_TX_BUF + memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); + + // wait until nobody else is sending to the ethernet + if (ac_could_be_sending_to_eth){ + hal_set_leds(0x8, 0x8); + dbsm_wait_for_opening(ac_could_be_sending_to_eth); + hal_set_leds(0x0, 0x8); + } + + if (0){ + printf("sending_reply to port %d, len = %d\n", cpu_tx_buf_dest_port, (int)reply_len); + print_buffer(buffer_ram(CPU_TX_BUF), reply_len/4); + } + + // fire it off + bp_send_from_buf(CPU_TX_BUF, cpu_tx_buf_dest_port, 1, 0, reply_len/4); + + // wait for it to complete (not long, it's a small pkt) + while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) + ; + + bp_clear_buf(CPU_TX_BUF); +} + +static uint16_t +chksum_buffer(void *buff_, size_t len) +{ + uint16_t *buff = (uint16_t *) buff_; + + // sum the individual 16 bit words + uint32_t sum = 0; + for (size_t i = 0; i < len/sizeof(uint16_t); i++){ + sum += buff[i]; + } + + // take only 16 bits out of the 32 bit sum and add up the carries + while (sum >> 16){ + sum = (sum & 0xffff) + (sum >> 16); + } + + // one's complement the result + return ~sum; +} + +static struct in_addr +create_ip_from_host(struct in_addr addr){ + //get an address that looks like the hosts + uint8_t low_byte = addr.s_addr & 0xff; + low_byte += 1; + if (low_byte == 0xff) low_byte = 0; + if (low_byte == 0x00) low_byte = 1; + addr.s_addr = (addr.s_addr & ~0xff) | low_byte; + return addr; +} + +static void +handle_control_chan_frame(u2_eth_ip_udp_t *pkt, size_t len) +{ + // setup reply + struct { + uint32_t ctrl_word; + u2_eth_ip_udp_t hdr; + uint8_t payload[REPLY_PAYLOAD_MAX_LEN]; + } reply _AL4; + memset(&reply, 0, sizeof(reply)); + + // process the control data + size_t len_out = handle_control_packets( + (uint8_t*)pkt + sizeof(u2_eth_ip_udp_t), + len - sizeof(u2_eth_ip_udp_t), reply.payload + ); + size_t total_len = sizeof(reply) - REPLY_PAYLOAD_MAX_LEN + len_out; + reply.ctrl_word = total_len; + + // load the ethernet header + reply.hdr.eth.dst = host_dst_mac_addr; + reply.hdr.eth.src = host_src_mac_addr; + reply.hdr.eth.ethertype = ETHERTYPE_IPV4; + + // load the ip header + reply.hdr.ip.ip_hl = sizeof(u2_ipv4_hdr_t)/sizeof(uint32_t); + reply.hdr.ip.ip_v = 4; + reply.hdr.ip.ip_tos = 0; + reply.hdr.ip.ip_len = sizeof(u2_ipv4_hdr_t) + sizeof(u2_udp_hdr_t) + len_out; + reply.hdr.ip.ip_id = 0; + reply.hdr.ip.ip_off = IP_DF; + reply.hdr.ip.ip_ttl = 255; + reply.hdr.ip.ip_p = IP_PROTO_UDP; + reply.hdr.ip.ip_sum = 0; + reply.hdr.ip.ip_src = host_src_ip_addr; + reply.hdr.ip.ip_dst = host_dst_ip_addr; + reply.hdr.ip.ip_sum = chksum_buffer(&reply.hdr.ip, sizeof(u2_ipv4_hdr_t)); + + // load the udp header + reply.hdr.udp.src_port = pkt->udp.dst_port; + reply.hdr.udp.dst_port = pkt->udp.src_port; + reply.hdr.udp.length = sizeof(u2_udp_hdr_t) + len_out; + reply.hdr.udp.checksum = 0; + + //send the reply + send_reply(&reply, total_len); +} + + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +bool +eth_pkt_inspector(dbsm_t *sm, int bufno) +{ + u2_eth_ip_udp_t *pkt = (u2_eth_ip_udp_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; + + if (pkt->eth.ethertype != ETHERTYPE_IPV4) + return true; // ignore, probably bogus PAUSE frame from MAC + + // inspect rcvd frame and figure out what do do. + switch (pkt->udp.dst_port){ + + case 32768: + //record the ip and mac addrs (used when setting up data init) + host_dst_ip_addr = pkt->ip.ip_src; + host_src_ip_addr = create_ip_from_host(pkt->ip.ip_src); + host_dst_mac_addr = pkt->eth.src; + host_src_mac_addr = *ethernet_mac_addr(); + handle_control_chan_frame(pkt, byte_len); + return true; + + case 32769: + //record the udp data ports (used when setting up data init) + host_dst_udp_port = pkt->udp.src_port; + host_src_udp_port = pkt->udp.dst_port; + return false; // pass it on to Tx DSP + + } + return true; // ignore, whatever +} + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + link_is_up = speed != 0; + hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); + printf("\neth link changed: speed = %d\n", speed); +} + + +void +print_tune_result(char *msg, bool tune_ok, + u2_fxpt_freq_t target_freq, struct tune_result *r) +{ +#if 0 + printf("db_tune %s %s\n", msg, tune_ok ? "true" : "false"); + putstr(" target_freq "); print_fxpt_freq(target_freq); newline(); + putstr(" baseband_freq "); print_fxpt_freq(r->baseband_freq); newline(); + putstr(" dxc_freq "); print_fxpt_freq(r->dxc_freq); newline(); + putstr(" residual_freq "); print_fxpt_freq(r->residual_freq); newline(); + printf(" inverted %s\n", r->inverted ? "true" : "false"); +#endif +} diff --git a/firmware/microblaze/apps/app_common_v2.h b/firmware/microblaze/apps/app_common_v2.h new file mode 100644 index 000000000..fa4c06d9b --- /dev/null +++ b/firmware/microblaze/apps/app_common_v2.h @@ -0,0 +1,83 @@ +// +// Copyright 2010 Ettus Research LLC +// +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_APP_COMMON_H +#define INCLUDED_APP_COMMON_H + +#include <stdbool.h> +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "memory_map.h" +#include "hal_io.h" +#include <stddef.h> +#include <db.h> + +#define CPU_TX_BUF 7 // cpu -> eth + +#define _AL4 __attribute__((aligned (4))) + +extern volatile bool link_is_up; // eth handler sets this + +// If there's a dbsm that sends to the ethernet, put it's address here +extern dbsm_t *ac_could_be_sending_to_eth; + +extern int cpu_tx_buf_dest_port; + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +bool eth_pkt_inspector(dbsm_t *sm, int bufno); + +void link_changed_callback(int speed); + +void +print_tune_result(char *msg, bool tune_ok, + u2_fxpt_freq_t target_freq, struct tune_result *r); + + +void start_rx_streaming_cmd(op_start_rx_streaming_t *p); +void stop_rx_cmd(void); +void restart_streaming(void); +bool is_streaming(void); + +#include "usrp2_ipv4_packet.h" +#include "usrp2_udp_packet.h" + +/*! + * \brief consolidated packet: padding + ethernet header + ip header + udp header + */ +typedef struct { + uint16_t padding; + u2_eth_hdr_t eth; + u2_ipv4_hdr_t ip; + u2_udp_hdr_t udp; +} u2_eth_ip_udp_t; + +extern uint16_t host_dst_udp_port; +extern uint16_t host_src_udp_port; +extern struct in_addr host_dst_ip_addr; +extern struct in_addr host_src_ip_addr; +extern eth_mac_addr_t host_dst_mac_addr; +extern eth_mac_addr_t host_src_mac_addr; + +#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/app_passthru_v2.c b/firmware/microblaze/apps/app_passthru_v2.c new file mode 100644 index 000000000..406c56b3b --- /dev/null +++ b/firmware/microblaze/apps/app_passthru_v2.c @@ -0,0 +1,251 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "app_passthru_v2.h" +#include "buffer_pool.h" +#include "memcpy_wa.h" +#include "ethernet.h" +#include "nonstdio.h" +#include "print_rmon_regs.h" +#include "db.h" +#include "clocks.h" +#include <string.h> + +volatile bool link_is_up = false; // eth handler sets this + + +// If this is non-zero, this dbsm could be writing to the ethernet +dbsm_t *ac_could_be_sending_to_eth; + +//static unsigned char exp_seqno = 0; + +void +set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) +{ + reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; + reply_pkt->ehdr.src = *ethernet_mac_addr(); + reply_pkt->ehdr.ethertype = U2_ETHERTYPE; + reply_pkt->thdr.flags = 0; + reply_pkt->thdr.fifo_status = 0; // written by protocol engine + reply_pkt->thdr.seqno = 0; // written by protocol engine + reply_pkt->thdr.ack = 0; // written by protocol engine + u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); + reply_pkt->fixed.timestamp = timer_regs->time; +} + +static void +send_reply(unsigned char *reply, size_t reply_len) +{ + if (reply_len < 64) + reply_len = 64; + + // wait for buffer to become idle + hal_set_leds(0x4, 0x4); + while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) + ; + hal_set_leds(0x0, 0x4); + + // copy reply into CPU_TX_BUF + memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); + + // wait until nobody else is sending to the ethernet + if (ac_could_be_sending_to_eth){ + hal_set_leds(0x8, 0x8); + dbsm_wait_for_opening(ac_could_be_sending_to_eth); + hal_set_leds(0x0, 0x8); + } + + // fire it off + bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, reply_len/4); + + // wait for it to complete (not long, it's a small pkt) + while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) + ; + + bp_clear_buf(CPU_TX_BUF); +} + + +static size_t +op_id_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_id_reply_t *r = (op_id_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) // no room + return 0; + + // Build reply subpacket + + r->opcode = OP_ID_REPLY; + r->len = sizeof(op_id_reply_t); + r->rid = p->rid; + r->addr = *ethernet_mac_addr(); + r->hw_rev = 0x0000; // FIXME + // r->fpga_md5sum = ; // FIXME + // r->sw_md5sum = ; // FIXME + + // FIXME Add d'board info, including dbid, min/max gain, min/max freq + + return r->len; +} + +static size_t +add_eop(void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_EOP; + r->len = sizeof(*r); + r->rid = 0; + r->ok = 0; + + return r->len; +} + +bool +handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) +{ + unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; + unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; + int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); + + bool handled_it = false; + + // initialize reply + memset(reply, 0, sizeof(reply)); + set_reply_hdr((u2_eth_packet_t *) reply, pkt); + + // point to beginning of payload (subpackets) + unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); + int payload_len = len - sizeof(u2_eth_packet_t); + + size_t subpktlen = 0; + + while (payload_len >= sizeof(op_generic_t)){ + const op_generic_t *gp = (const op_generic_t *) payload; + subpktlen = 0; + + switch(gp->opcode){ + case OP_EOP: // end of subpackets + goto end_of_subpackets; + + case OP_ID: + subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); + handled_it = true; + break; + + default: + if (0){ + printf("\npassing on %d\n", gp->opcode); + } + break; + } + + int t = (gp->len + 3) & ~3; // bump to a multiple of 4 + payload += t; + payload_len -= t; + + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + } + + end_of_subpackets: + + if (handled_it){ + // add the EOP marker + subpktlen = add_eop(reply_payload, reply_payload_space); + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + + send_reply(reply, reply_payload - reply); + } + + return handled_it; +} + + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +bool +eth_pkt_inspector(dbsm_t *sm, int bufno) +{ + u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; + + //static size_t last_len = 0; + + // hal_toggle_leds(0x1); + + // inspect rcvd frame and figure out what do do. + + if (pkt->ehdr.ethertype != U2_ETHERTYPE) + return true; // ignore, probably bogus PAUSE frame from MAC + + int chan = u2p_chan(&pkt->fixed); + + switch (chan){ + case CONTROL_CHAN: + return handle_control_chan_frame(pkt, byte_len); + break; + + case 0: + default: +#if 0 + if (last_len != 0){ + if (byte_len != last_len){ + printf("Len: %d last: %d\n", byte_len, last_len); + } + } + last_len = byte_len; + + if((pkt->thdr.seqno) == exp_seqno){ + exp_seqno++; + //putchar('.'); + } + else { + // putchar('S'); + //printf("S%d %d ",exp_seqno,pkt->thdr.seqno); + exp_seqno = pkt->thdr.seqno + 1; + } +#endif + return false; // pass it on to Tx DSP + break; + } +} + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + link_is_up = speed != 0; + hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); + printf("\neth link changed: speed = %d\n", speed); +} diff --git a/firmware/microblaze/apps/app_passthru_v2.h b/firmware/microblaze/apps/app_passthru_v2.h new file mode 100644 index 000000000..3904c670f --- /dev/null +++ b/firmware/microblaze/apps/app_passthru_v2.h @@ -0,0 +1,54 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_APP_COMMON_H +#define INCLUDED_APP_COMMON_H + +#include <stdbool.h> +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "memory_map.h" +#include "hal_io.h" +#include <stddef.h> +#include <db.h> + +#define CPU_TX_BUF 7 // cpu -> eth + +#define _AL4 __attribute__((aligned (4))) + +extern volatile bool link_is_up; // eth handler sets this + + +// If there's a dbsm that sends to the ethernet, put it's address here +extern dbsm_t *ac_could_be_sending_to_eth; + + +void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +bool eth_pkt_inspector(dbsm_t *sm, int bufno); + +void link_changed_callback(int speed); + +bool handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); + +#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/bitrot/tx_drop.c b/firmware/microblaze/apps/bitrot/tx_drop.c new file mode 100644 index 000000000..3a336e938 --- /dev/null +++ b/firmware/microblaze/apps/bitrot/tx_drop.c @@ -0,0 +1,261 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common.h" +#include "print_rmon_regs.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +/* + * Like tx_only.c, but we discard data packets instead of sending them to the + * DSP TX pipeline. + */ + +int total_rx_pkts = 0; +int total_rx_bytes = 0; + + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +//#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + + +/* + * ================================================================ + * configure DSP TX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE 4 +#define DSP_TX_SAMPLES_PER_FRAME 250 // not used except w/ debugging +#define DSP_TX_EXTRA_LINES 2 // reads word0 + timestamp + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past ethernet header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + + +// ---------------------------------------------------------------- + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout +} + +// Tx DSP underrun +void +underrun_irq_handler(unsigned irq) +{ + putchar('U'); + + dbsm_stop(&dsp_tx_sm); + dsp_tx_regs->clear_state = 1; + dbsm_start(&dsp_tx_sm); // restart sm so we're listening to ethernet again + + // putstr("\nirq: underrun\n"); +} + + +void +start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) +{ +} + +void +stop_rx_cmd(void) +{ +} + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + op_config_tx_t def_config; + memset(&def_config, 0, sizeof(def_config)); + def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] + def_config.scale_iq = (tx_scale << 16) | tx_scale; + def_config.interp = interp; + + // setup Tx DSP regs + config_tx_cmd(&def_config); +} + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (status & BPS_ERROR_ALL){ + // FIXME rare path, handle error conditions + putstr("Errors! status = "); + puthex32_nl(status); + + printf("total_rx_pkts = %d\n", total_rx_pkts); + printf("total_rx_bytes = %d\n", total_rx_bytes); + + print_rmon_regs(); + + if (status & (BPS_ERROR(DSP_TX_BUF_0) | BPS_ERROR(DSP_TX_BUF_1))){ + dbsm_stop(&dsp_tx_sm); + dsp_tx_regs->clear_state = 1; // try to restart + dbsm_start(&dsp_tx_sm); + return; + } + } + + dbsm_process_status(&dsp_tx_sm, status); + + if (status & BPS_DONE(CPU_TX_BUF)){ + bp_clear_buf(CPU_TX_BUF); + } +} + + +/* + * Called when an ethernet packet is received. + * + * Claim that we handled all the packets, + * dropping those destined for the TX DSP chain + * on the ground. + */ +bool +nop_eth_pkt_inspector(dbsm_t *sm, int bufno) +{ + hal_toggle_leds(0x1); + + u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 1) * 4; + + total_rx_pkts++; + total_rx_bytes += byte_len; + + // inspect rcvd frame and figure out what do do. + + if (pkt->ehdr.ethertype != U2_ETHERTYPE) + return true; // ignore, probably bogus PAUSE frame from MAC + + int chan = u2p_chan(&pkt->fixed); + + switch (chan){ + case CONTROL_CHAN: + handle_control_chan_frame(pkt, byte_len); + return true; // we handled the packet + break; + + case 0: + default: + return true; // We handled the data by dropping it :) + break; + } +} + + +int +main(void) +{ + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + hal_gpio_set_tx_mode(15, 0, GPIOM_FPGA_1); + hal_gpio_set_rx_mode(15, 0, GPIOM_FPGA_1); + + putstr("\ntx_drop\n"); + + // Control LEDs + hal_set_leds(0x0, 0x3); + + pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + nop_eth_pkt_inspector); + + // program tx registers + setup_tx(); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + while(1){ + buffer_irq_handler(0); + } +} + diff --git a/firmware/microblaze/apps/bitrot/tx_drop2.c b/firmware/microblaze/apps/bitrot/tx_drop2.c new file mode 100644 index 000000000..3afd722e6 --- /dev/null +++ b/firmware/microblaze/apps/bitrot/tx_drop2.c @@ -0,0 +1,292 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common.h" +#include "print_rmon_regs.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +/* + * Like tx_only.c, but we discard data packets instead of sending them to the + * DSP TX pipeline. + */ + +int total_rx_pkts = 0; +int total_rx_bytes = 0; + + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +//#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + + +/* + * ================================================================ + * configure DSP RX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE 5 +#define DSP_RX_SAMPLES_PER_FRAME 128 +#define DSP_RX_EXTRA_LINES 1 // writes timestamp + +// Receive from DSP Rx +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ethernet +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from last_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + +/* + * ================================================================ + * configure DSP TX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE 4 +#define DSP_TX_SAMPLES_PER_FRAME 250 // not used except w/ debugging +#define DSP_TX_EXTRA_LINES 2 // reads word0 + timestamp + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past ethernet header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + + +// ---------------------------------------------------------------- + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout +} + +// Tx DSP underrun +void +underrun_irq_handler(unsigned irq) +{ + putchar('U'); + + dbsm_stop(&dsp_tx_sm); + dsp_tx_regs->clear_state = 1; + dbsm_start(&dsp_tx_sm); // restart sm so we're listening to ethernet again + + // putstr("\nirq: underrun\n"); +} + + +void +start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) +{ +} + +void +stop_rx_cmd(void) +{ +} + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + +#if 1 + int tx_scale = 256; + int interp = 32; + + op_config_tx_t def_config; + memset(&def_config, 0, sizeof(def_config)); + def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] + def_config.scale_iq = (tx_scale << 16) | tx_scale; + def_config.interp = interp; + + // setup Tx DSP regs + config_tx_cmd(&def_config); +#endif +} + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (status & BPS_ERROR_ALL){ + // FIXME rare path, handle error conditions + putstr("Errors! status = "); + puthex32_nl(status); + + printf("total_rx_pkts = %d\n", total_rx_pkts); + printf("total_rx_bytes = %d\n", total_rx_bytes); + + print_rmon_regs(); + + if (status & (BPS_ERROR(DSP_TX_BUF_0) | BPS_ERROR(DSP_TX_BUF_1))){ + dbsm_stop(&dsp_tx_sm); + dsp_tx_regs->clear_state = 1; // try to restart + dbsm_start(&dsp_tx_sm); + return; + } + } + + dbsm_process_status(&dsp_tx_sm, status); + + if (status & BPS_DONE(CPU_TX_BUF)){ + bp_clear_buf(CPU_TX_BUF); + } +} + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here (always!) + */ +bool +nop_eth_pkt_inspector(dbsm_t *sm, int bufno) +{ + hal_toggle_leds(0x1); + + u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 1) * 4; + + total_rx_pkts++; + total_rx_bytes += byte_len; + + // inspect rcvd frame and figure out what do do. + + if (pkt->ehdr.ethertype != U2_ETHERTYPE) + return true; // ignore, probably bogus PAUSE frame from MAC + + int chan = u2p_chan(&pkt->fixed); + + switch (chan){ + case CONTROL_CHAN: + handle_control_chan_frame(pkt, byte_len); + return true; // we handled the packet + break; + + case 0: + default: + return true; // say we handled it + break; + } +} + + +int +main(void) +{ + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + hal_gpio_set_tx_mode(15, 0, GPIOM_FPGA_1); + hal_gpio_set_rx_mode(15, 0, GPIOM_FPGA_1); // no printing... + + putstr("\ntx_drop2\n"); + + // Control LEDs + hal_set_leds(0x0, 0x3); + + // pic_register_handler(IRQ_OVERRUN, overrun_irq_handler); + pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); + + //pic_register_handler(IRQ_TIMER, timer_irq_handler); + //hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + nop_eth_pkt_inspector); + + // program tx registers + setup_tx(); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + while(1){ + buffer_irq_handler(0); + } +} + diff --git a/firmware/microblaze/apps/bitrot/tx_drop_rate_limited.c b/firmware/microblaze/apps/bitrot/tx_drop_rate_limited.c new file mode 100644 index 000000000..2b8db7f7d --- /dev/null +++ b/firmware/microblaze/apps/bitrot/tx_drop_rate_limited.c @@ -0,0 +1,233 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common.h" +#include "print_rmon_regs.h" +#include "eth_mac.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +/* + * receive packets from ethernet at a fixed rate and discard them + */ + +int total_rx_pkts = 0; +int total_rx_bytes = 0; + + +static int timer_delta = (int)(MASTER_CLK_RATE * 10e-6); // 10us / tick + + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +//#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + + + +// ---------------------------------------------------------------- + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +static volatile bool receive_packet_now = false; + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + receive_packet_now = true; +} + + +// Tx DSP underrun +void +underrun_irq_handler(unsigned irq) +{ + putchar('U'); +} + + +void +start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) +{ +} + +void +stop_rx_cmd(void) +{ +} + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + op_config_tx_t def_config; + memset(&def_config, 0, sizeof(def_config)); + def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] + def_config.scale_iq = (tx_scale << 16) | tx_scale; + def_config.interp = interp; + + // setup Tx DSP regs + config_tx_cmd(&def_config); +} + + +/* + * Called when an ethernet packet is received. + * + * Claim that we handled all the packets, + * dropping those destined for the TX DSP chain + * on the ground. + */ +bool +nop_eth_pkt_inspector(dbsm_t *sm, int bufno) +{ + hal_toggle_leds(0x1); + + u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 1) * 4; + + total_rx_pkts++; + total_rx_bytes += byte_len; + + // inspect rcvd frame and figure out what do do. + + if (pkt->ehdr.ethertype != U2_ETHERTYPE) + return true; // ignore, probably bogus PAUSE frame from MAC + + int chan = u2p_chan(&pkt->fixed); + + switch (chan){ + case CONTROL_CHAN: + handle_control_chan_frame(pkt, byte_len); + return true; // we handled the packet + break; + + case 0: + default: + return true; // We handled the data by dropping it :) + break; + } +} + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) + bp_clear_buf(CPU_TX_BUF); + + if (status & (BPS_DONE(DSP_TX_BUF_0) | BPS_ERROR(DSP_TX_BUF_0))){ + bp_clear_buf(DSP_TX_BUF_0); + + if (status & BPS_ERROR(DSP_TX_BUF_0)){ + int crc = eth_mac_read_rmon(0x05); + int fifo_full = eth_mac_read_rmon(0x06); + int too_short_too_long = eth_mac_read_rmon(0x07); + putstr("Errors! status = "); + puthex32_nl(status); + + printf("crc_err\t\t= %d\n", crc); + printf("fifo_full\t\t= %d\n", fifo_full); + printf("too_short_too_long\t= %d\n", too_short_too_long); + + printf("total_rx_pkts = %d\n", total_rx_pkts); + printf("total_rx_bytes = %d\n", total_rx_bytes); + } + else + nop_eth_pkt_inspector(0, DSP_TX_BUF_0); + } + + if (receive_packet_now && (status & BPS_IDLE(DSP_TX_BUF_0))){ + receive_packet_now = false; + bp_receive_to_buf(DSP_TX_BUF_0, PORT_ETH, 1, 0, BP_LAST_LINE); + } +} + + +int +main(void) +{ + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + hal_gpio_set_tx_mode(15, 0, GPIOM_FPGA_1); + hal_gpio_set_rx_mode(15, 0, GPIOM_FPGA_1); + + putstr("\ntx_drop_rate_limited\n"); + + // Control LEDs + hal_set_leds(0x0, 0x3); + + pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); + + pic_register_handler(IRQ_TIMER, timer_irq_handler); + hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + // program tx registers + setup_tx(); + + // start a receive from ethernet + bp_receive_to_buf(DSP_TX_BUF_0, PORT_ETH, 1, 0, BP_LAST_LINE); + + while(1){ + buffer_irq_handler(0); + } +} + diff --git a/firmware/microblaze/apps/blink_leds.c b/firmware/microblaze/apps/blink_leds.c new file mode 100644 index 000000000..682ca8db2 --- /dev/null +++ b/firmware/microblaze/apps/blink_leds.c @@ -0,0 +1,40 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "nonstdio.h" + +int +main(void) +{ + int counter = 0; + + u2_init(); + + putstr("blink_leds\n"); + while(1){ + output_regs->leds = (counter++ & 0x3); + } + + return 0; +} diff --git a/firmware/microblaze/apps/blink_leds2.c b/firmware/microblaze/apps/blink_leds2.c new file mode 100644 index 000000000..13e78afb3 --- /dev/null +++ b/firmware/microblaze/apps/blink_leds2.c @@ -0,0 +1,53 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "pic.h" +#include "nonstdio.h" + +//#define DELTA_T (MASTER_CLK_RATE/2) // 0.5s (10ns per tick) +#define DELTA_T 5000 // 5 us (10ns per tick) + + +void +timer_handler(unsigned irq) +{ + hal_set_timeout(DELTA_T); // schedule next timeout + hal_toggle_leds(0x2); +} + +int +main(void) +{ + u2_init(); + + putstr("blink_leds2\n"); + pic_register_handler(IRQ_ONETIME, timer_handler); + hal_set_timeout(DELTA_T); // schedule next timeout + + while(1){ + hal_toggle_leds(0x1); + } + + return 0; +} diff --git a/firmware/microblaze/apps/buf_ram_test.c b/firmware/microblaze/apps/buf_ram_test.c new file mode 100644 index 000000000..1aca2aec5 --- /dev/null +++ b/firmware/microblaze/apps/buf_ram_test.c @@ -0,0 +1,89 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "u2_init.h" +#include "memory_map.h" +#include <stdbool.h> +#include "nonstdio.h" +#include "hal_io.h" +#include "mdelay.h" + + +static void +write_bufs(void) +{ + int i, n; + int counter = 0; + + for (n = 0; n < NBUFFERS; n++){ + volatile int *p = buffer_ram(n); + for (i = 0; i < BP_NLINES; i++) + p[i] = counter++; + } +} + +// return number of errors detected +static int +check_bufs(void) +{ + int i, n; + int counter = 0; + int nerrors = 0; + + for (n = 0; n < NBUFFERS; n++){ + volatile int *p = buffer_ram(n); + for (i = 0; i < BP_NLINES; i++, counter++){ + int rd = p[i]; + if (rd != counter){ + putchar('b'); + putchar(n + '0'); + putchar('['); + puthex16(i); + putstr("] exp: "); + puthex32(counter); + putstr(" got: "); + puthex32_nl(rd); + nerrors++; + } + } + } + return nerrors; +} + + +int +main(void) +{ + u2_init(); + + output_regs->leds = 0; + + write_bufs(); + int nerrors = check_bufs(); + + if (nerrors == 0){ + output_regs->leds = 0x3; // leds on -> PASS + putstr("PASS\n"); + } + else { + output_regs->leds = 0x0; // leds off -> FAIL + putstr("FAIL\n"); + } + + hal_finish(); + return 0; +} diff --git a/firmware/microblaze/apps/burn_dbsrx_eeprom.c b/firmware/microblaze/apps/burn_dbsrx_eeprom.c new file mode 100644 index 000000000..116d4d8d0 --- /dev/null +++ b/firmware/microblaze/apps/burn_dbsrx_eeprom.c @@ -0,0 +1,106 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "i2c.h" +#include "usrp2_i2c_addr.h" +#include "mdelay.h" +#include "hal_io.h" +#include "nonstdio.h" +#include <stdbool.h> + + + +int read_dboard_eeprom(int i2c_addr); + + +#define USRP_DBID_DBS_RX 0x0002 +#define USRP_DBID_DBS_RX_WITH_CLOCK_MOD 0x000d + +const char dbs_rx_rev2_eeprom[] = { + 0xdb, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 +}; + +#define LED_VALS (LED_A | LED_B | LED_C | LED_D) +#define LED_MASK (LED_A | LED_B | LED_C | LED_D) + +int +main(void) +{ + u2_init(); + + puts("\nburn_dbsrx_eeprom\n"); + + hal_set_leds(0, ~0); // all off + + int i2c_addr = I2C_ADDR_RX_A; + int dbid = read_dboard_eeprom(i2c_addr); + bool ok; + const char *msg = 0; + + switch (dbid){ + case -1: + msg = "No RX daughterboard found"; + goto bad; + + case -2: + msg = "Invalid RX EEPROM contents"; + goto bad; + + case USRP_DBID_DBS_RX_WITH_CLOCK_MOD: + msg = "RX Daughterboard already reports being a DBS RX w/ CLOCK_MOD"; + goto good; + + case USRP_DBID_DBS_RX: + // Says it's a DBS_RX, attempt to burn the EEPROM + ok = eeprom_write(i2c_addr, 0, + dbs_rx_rev2_eeprom, sizeof(dbs_rx_rev2_eeprom)); + if (ok){ + msg = "Successfully programmed db as DBS RX Rev 2.1"; + goto good; + } + else { + msg = "Failed to write daugherboard eeprom"; + goto bad; + } + + default: + msg = "Daughterboard is not a DBS RX; ignored"; + goto bad; + } + + good: + puts(msg); + hal_set_leds(LED_VALS, LED_MASK); + while (1) + ; + + bad: + puts(msg); + while(1){ + hal_toggle_leds(LED_VALS); + mdelay(50); + } +} diff --git a/firmware/microblaze/apps/burnrev30.c b/firmware/microblaze/apps/burnrev30.c new file mode 100644 index 000000000..40fa53e34 --- /dev/null +++ b/firmware/microblaze/apps/burnrev30.c @@ -0,0 +1,162 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include <i2c.h> +#include <usrp2_i2c_addr.h> +#include <clocks.h> +#include "sd.h" +#include "mdelay.h" + +#define HW_REV_MAJOR 3 +#define HW_REV_MINOR 0 + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int test_sd() +{ + int i = sd_init(); + if(i==0) { + puts("FAILED INIT of Card\n"); + return 0; + } + + unsigned char buf[512]; + i = sd_read_block(2048,buf); + if(i == 0) { + puts("READ Command Rejected\n"); + return 0; + } + if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) + ; + else { + puts("Read bad data from SD Card\n"); + return 0; + } + return 1; +} + +int +main(void) +{ + u2_init(); + + putstr("\nFactory Test, Board Rev 3.0\n"); + + bool ok = true; + unsigned char maj = HW_REV_MAJOR; + unsigned char min = HW_REV_MINOR; + ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); + ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); + + putstr("\nset_hw_rev\n"); + if (ok) + printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + else { + printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + hal_finish(); + return 0; + } + + if(test_sd()) + puts("SD OK\n"); + else { + puts("SD FAIL\n"); + //hal_finish(); + //return 0; + } + if(test_ram()) + puts("RAM OK\n"); + else { + puts("RAM FAIL\n"); + hal_finish(); + return 0; + } + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + clocks_mimo_config(MC_WE_LOCK_TO_SMA); + + while (!clocks_lock_detect()) { + puts("No Lock"); + mdelay(1000); + } + puts("Clock Locked\n"); + +} diff --git a/firmware/microblaze/apps/burnrev31.c b/firmware/microblaze/apps/burnrev31.c new file mode 100644 index 000000000..f6b08d187 --- /dev/null +++ b/firmware/microblaze/apps/burnrev31.c @@ -0,0 +1,162 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include <i2c.h> +#include <usrp2_i2c_addr.h> +#include <clocks.h> +#include "sd.h" +#include "mdelay.h" + +#define HW_REV_MAJOR 3 +#define HW_REV_MINOR 1 + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int test_sd() +{ + int i = sd_init(); + if(i==0) { + puts("FAILED INIT of Card\n"); + return 0; + } + + unsigned char buf[512]; + i = sd_read_block(2048,buf); + if(i == 0) { + puts("READ Command Rejected\n"); + return 0; + } + if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) + ; + else { + puts("Read bad data from SD Card\n"); + return 0; + } + return 1; +} + +int +main(void) +{ + u2_init(); + + putstr("\nFactory Test, Board Rev 3.1\n"); + + bool ok = true; + unsigned char maj = HW_REV_MAJOR; + unsigned char min = HW_REV_MINOR; + ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); + ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); + + putstr("\nset_hw_rev\n"); + if (ok) + printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + else { + printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + hal_finish(); + return 0; + } + + if(test_sd()) + puts("SD OK\n"); + else { + puts("SD FAIL\n"); + //hal_finish(); + //return 0; + } + if(test_ram()) + puts("RAM OK\n"); + else { + puts("RAM FAIL\n"); + hal_finish(); + return 0; + } + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + clocks_mimo_config(MC_WE_LOCK_TO_SMA); + + while (!clocks_lock_detect()) { + puts("No Lock"); + mdelay(1000); + } + puts("Clock Locked\n"); + +} diff --git a/firmware/microblaze/apps/burnrev40.c b/firmware/microblaze/apps/burnrev40.c new file mode 100644 index 000000000..362270961 --- /dev/null +++ b/firmware/microblaze/apps/burnrev40.c @@ -0,0 +1,162 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include <i2c.h> +#include <usrp2_i2c_addr.h> +#include <clocks.h> +#include "sd.h" +#include "mdelay.h" + +#define HW_REV_MAJOR 4 +#define HW_REV_MINOR 0 + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int test_sd() +{ + int i = sd_init(); + if(i==0) { + puts("FAILED INIT of Card\n"); + return 0; + } + + unsigned char buf[512]; + i = sd_read_block(2048,buf); + if(i == 0) { + puts("READ Command Rejected\n"); + return 0; + } + if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) + ; + else { + puts("Read bad data from SD Card\n"); + return 0; + } + return 1; +} + +int +main(void) +{ + u2_init(); + + putstr("\nFactory Test, Board Rev 4.0\n"); + + bool ok = true; + unsigned char maj = HW_REV_MAJOR; + unsigned char min = HW_REV_MINOR; + ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); + ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); + + putstr("\nset_hw_rev\n"); + if (ok) + printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + else { + printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + hal_finish(); + return 0; + } + + if(test_sd()) + puts("SD OK\n"); + else { + puts("SD FAIL\n"); + //hal_finish(); + //return 0; + } + if(test_ram()) + puts("RAM OK\n"); + else { + puts("RAM FAIL\n"); + hal_finish(); + return 0; + } + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + clocks_mimo_config(MC_WE_LOCK_TO_SMA); + + while (!clocks_lock_detect()) { + puts("No Lock"); + mdelay(1000); + } + puts("Clock Locked\n"); + +} diff --git a/firmware/microblaze/apps/can_i_sub.c b/firmware/microblaze/apps/can_i_sub.c new file mode 100644 index 000000000..ed49791f0 --- /dev/null +++ b/firmware/microblaze/apps/can_i_sub.c @@ -0,0 +1,25 @@ +#include <u2_init.h> +#include <nonstdio.h> + +//typedef long long int64_t; + + +int64_t sub(int64_t a, int64_t b); +void print(int64_t d); + +int main(void) +{ + u2_init(); + + int64_t d = sub(462550990848000LL, 462028800000000LL); + print_uint64(d); + newline(); + return 0; +} + +int64_t sub(int64_t a, int64_t b) +{ + return a - b; +} + + diff --git a/firmware/microblaze/apps/double_buffer_fragment.c b/firmware/microblaze/apps/double_buffer_fragment.c new file mode 100644 index 000000000..cfc061247 --- /dev/null +++ b/firmware/microblaze/apps/double_buffer_fragment.c @@ -0,0 +1,138 @@ +#if 0 +void +double_buffering(int port) { + unsigned int localstatus = buffer_pool_status->status; + + if(localstatus & BPS_DONE_0) { + bp_clear_buf(0); + if(buffer_state[0] == FILLING) { + buffer_state[0] = FULL; + if(buffer_state[1] == EMPTY) { + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[0] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines + buffer_state[0] = FILLING; + } + if(buffer_state[1] == FULL) { + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 0\n"); + } + + if(localstatus & BPS_DONE_1) { + bp_clear_buf(1); + if(buffer_state[1] == FILLING) { + buffer_state[1] = FULL; + if(buffer_state[0] == EMPTY) { + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[0] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[1] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + if(buffer_state[0] == FULL) { + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 1\n"); + } + + if(localstatus & BPS_DONE_2) { + bp_clear_buf(2); + if(buffer_state[2] == FILLING) { + buffer_state[2] = FULL; + if(buffer_state[3] == EMPTY) { + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines + buffer_state[3] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[2] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 + buffer_state[2] = FILLING; + } + if(buffer_state[3] == FULL) { + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 2\n"); + } + + if(localstatus & BPS_DONE_3) { + bp_clear_buf(3); + if(buffer_state[3] == FILLING) { + buffer_state[3] = FULL; + if(buffer_state[2] == EMPTY) { + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines + buffer_state[2] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[3] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 + buffer_state[3] = FILLING; + } + if(buffer_state[2] == FULL) { + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 3\n"); + } +} +#endif diff --git a/firmware/microblaze/apps/echo.c b/firmware/microblaze/apps/echo.c new file mode 100644 index 000000000..89108ee80 --- /dev/null +++ b/firmware/microblaze/apps/echo.c @@ -0,0 +1,34 @@ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "u2_init.h" +#include "stdio.h" + +int +main(void) +{ + u2_init(); + + puts("\n>>> echo <<<"); + + while (1){ + int ch = getchar(); + putchar(ch); + } + + return 0; +} diff --git a/firmware/microblaze/apps/eth_serdes.c b/firmware/microblaze/apps/eth_serdes.c new file mode 100644 index 000000000..2d2ddc1ca --- /dev/null +++ b/firmware/microblaze/apps/eth_serdes.c @@ -0,0 +1,233 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_passthru_v2.h" +#include "memcpy_wa.h" +#include "clocks.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno __attribute__((unused)); // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between ethernet and serdes + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // serdes -> eth (double buffer) +#define DSP_RX_BUF_1 3 // serdes -> eth +#define DSP_TX_BUF_0 4 // eth -> serdes (double buffer) +#define DSP_TX_BUF_1 5 // eth -> serdes + +/* + * ================================================================ + * configure serdes double buffering state machine (eth -> serdes) + * ================================================================ + */ + + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to serdes +buf_cmd_args_t dsp_tx_send_args = { + PORT_SERDES, + 0, + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ==================================================================== + * configure serdes RX double buffering state machine (serdes -> eth) + * ==================================================================== + */ + +// receive from serdes +buf_cmd_args_t dsp_rx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// ---------------------------------------------------------------- + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ + +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ +#if 0 + uint32_t *p = buffer_ram(buf_this); + uint32_t last_line = buffer_pool_status->last_line[buf_this] - sm->last_line_adj; + printf("fw_sets_seqno_inspector: buf_this = %d, last_line = %d\n", + buf_this, last_line); + + print_buffer(p, (last_line + 1)); +#endif + +#if 0 + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; +#endif + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (0 && (status & ~BPS_IDLE_ALL)){ + putstr("status = "); + puthex32_nl(status); + } + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + output_regs->led_src = 0x3; // h/w controls bottom two bits + clocks_enable_test_clk(true, 1); + + putstr("\neth <-> serdes\n"); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + // clocks_mimo_config(MC_WE_LOCK_TO_SMA | MC_PROVIDE_CLK_TO_MIMO); + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + +#if 1 + output_regs->debug_mux_ctrl = 1; + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> serdes + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + // initialize double buffering state machine for serdes -> ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // kick off the state machines + dbsm_start(&dsp_tx_sm); + dbsm_start(&dsp_rx_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + } +} diff --git a/firmware/microblaze/apps/factory_test.c b/firmware/microblaze/apps/factory_test.c new file mode 100644 index 000000000..e1fbb0e40 --- /dev/null +++ b/firmware/microblaze/apps/factory_test.c @@ -0,0 +1,438 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include <i2c.h> +#include <usrp2_i2c_addr.h> +#include <clocks.h> +#include "sd.h" + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between ethernet and DSP pipelines + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + +/* + * ================================================================ + * configure DSP TX double buffering state machine (eth -> dsp) + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ================================================================ + * configure DSP RX double buffering state machine (dsp -> eth) + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +} + + +void +stop_rx_cmd(void) +{ + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + // setup some defaults + + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = interp; +} + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int test_sd() +{ + int i = sd_init(); + if(i==0) { + puts("FAILED INIT of Card\n"); + return 0; + } + + unsigned char buf[512]; + i = sd_read_block(2048,buf); + if(i == 0) { + puts("READ Command Rejected\n"); + return 0; + } + if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) + ; + else { + puts("Read bad data from SD Card\n"); + return 0; + } + return 1; +} + +int +main(void) +{ + u2_init(); + + putstr("\nFactory Test\n"); + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + if(test_sd()) + puts("SD OK\n"); + else { + puts("SD FAIL\n"); + // hal_finish(); + //return 0; + } + if(test_ram()) + puts("RAM OK\n"); + else { + puts("RAM FAIL\n"); + hal_finish(); + return 0; + } + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + output_regs->led_src = 0x7; // make bottom 3 controlled by HW + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + clocks_enable_tx_dboard(true,1); + clocks_mimo_config(MC_WE_LOCK_TO_SMA); +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + + output_regs->debug_mux_ctrl = 1; +#if 0 + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // program tx registers + setup_tx(); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/gen_eth_packets.c b/firmware/microblaze/apps/gen_eth_packets.c new file mode 100644 index 000000000..4d521f6bf --- /dev/null +++ b/firmware/microblaze/apps/gen_eth_packets.c @@ -0,0 +1,187 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include "print_rmon_regs.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +// ---------------------------------------------------------------- + +static eth_mac_addr_t dst_mac_addr = + {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; + +// ---------------------------------------------------------------- + +// #define PACKET_SIZE 1500 // bytes +// #define ETH_DATA_RATE 1000000 // 1MB/s +// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s + +// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts + +static int timer_delta = (int)(MASTER_CLK_RATE * 1e-3); // tick at 1 kHz +static int sim_timer_delta = (int)(MASTER_CLK_RATE * 100e-6); // tick at 10 kHz + +static volatile bool send_packet_now = false; // timer handler sets this +static volatile bool link_is_up = false; // eth handler sets this + +int packet_number = 0; + + +#define CPU_TX_BUF 0 // cpu xmits ethernet frames from here +#define CPU_RX_BUF 1 // receive ethernet frames here + +// ---------------------------------------------------------------- + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + link_is_up = speed == 0 ? false : true; + hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); + printf("\neth link changed: speed = %d\n", speed); +} + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = 1; +} + + +static void +init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) +{ + int i = 0; + int mark = ((bufnum & 0xff) << 24) | 0x005A0000; + + for (i = 0; i < BP_NLINES; i++){ + buf[i] = mark | i; + mark ^= 0x00FF0000; + } + + // copy header into buffer + memcpy_wa(buf, pkt, sizeof(*pkt)); +} + +static void +init_packets(void) +{ + u2_eth_packet_t pkt __attribute__((aligned (4))); + + memset(&pkt, 0, sizeof(pkt)); + + pkt.ehdr.dst = dst_mac_addr; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + pkt.fixed.word0 = 0x01234567; + pkt.fixed.timestamp = 0xffffffff; + + // init just the one we're using + init_packet((void *)buffer_ram(CPU_TX_BUF), &pkt, CPU_TX_BUF); +} + +int +main(void) +{ + int npackets_sent = 0; + + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ngen_eth_packets\n"); + + hal_set_leds(0x0, 0x3); + + init_packets(); + + pic_register_handler(IRQ_TIMER, timer_irq_handler); + + if (hwconfig_simulation_p()) + timer_delta = sim_timer_delta; + + hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + /* + if (hwconfig_simulation_p()){ + eth_mac->speed = 4; // hardcode mac speed to 1000 + link_is_up = true; + } + */ + + // fire off a receive from the ethernet + bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); + + while(1){ + uint32_t status = buffer_pool_status->status; + + if (status & (BPS_DONE(CPU_RX_BUF) | BPS_ERROR(CPU_RX_BUF))){ + bp_clear_buf(CPU_RX_BUF); + // ignore incoming ethernet packets; they were looped back in sim + bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); + } + + if (status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))){ + if (status & BPS_ERROR(CPU_TX_BUF)){ + putchar('E'); + } + bp_clear_buf(CPU_TX_BUF); + npackets_sent++; + if ((npackets_sent & 0xF) == 0){ // print after every 16 packets + //print_rmon_regs(); + putchar('.'); + } + } + + if (link_is_up && send_packet_now && (status & BPS_IDLE(CPU_TX_BUF))){ + send_packet_now = false; + + // kick off the next packet + // FIXME set packet number in packet + + bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, 255); // 1KB total + hal_toggle_leds(0x1); + } + } + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/gen_pause_frames.c b/firmware/microblaze/apps/gen_pause_frames.c new file mode 100644 index 000000000..0f81dafff --- /dev/null +++ b/firmware/microblaze/apps/gen_pause_frames.c @@ -0,0 +1,207 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "u2_eth_packet.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> + + +// ---------------------------------------------------------------- + +unsigned char dst_mac_addr[6] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff +}; + +// ---------------------------------------------------------------- + +// #define PACKET_SIZE 1500 // bytes +// #define ETH_DATA_RATE 1000000 // 1MB/s +// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s + +// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +static volatile bool send_packet_now = false; // timer handler sets this +static volatile bool link_is_up = false; // eth handler sets this + +int packet_number = 0; + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + putstr("\neth link changed: speed = "); + puthex16_nl(speed); +} + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = 1; +} + + +void +buffer_irq_handler(unsigned irq) +{ + // FIXME +} + +static void +init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) +{ + int i = 0; + int mark = ((bufnum & 0xff) << 24) | 0x005A0000; + + for (i = 0; i < BP_NLINES; i++){ + buf[i] = mark | i; + mark ^= 0x00FF0000; + } + + // copy header into buffer + memcpy_wa(buf, pkt, sizeof(*pkt)); +} + +static void +init_packets(void) +{ + int i; + + u2_eth_packet_t pkt __attribute__((aligned (4))); + + for (i = 0; i < 6; i++){ + pkt.ehdr.dst.addr[i] = dst_mac_addr[i]; + } + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + + // fill ALL buffers for debugging + for (i = 0; i < 8; i++) + init_packet((void *)buffer_ram(i), &pkt, i); +} + +static int led_counter = 0; + +int +main(void) +{ + int send_pause = 1; + + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ngen_eth_packets\n"); + + // Control LEDs + output_regs->leds = 0x00; + + init_packets(); + + // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now + pic_register_handler(IRQ_TIMER, timer_irq_handler); + hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + eth_mac->pause_frame_send_en = 1; + eth_mac->pause_quanta_set = 16384 / 512; + + // eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 + + while(1){ + if (link_is_up && send_packet_now){ + send_packet_now = false; + + + if (send_pause) + eth_mac->xon_cpu = 1; + else + eth_mac->xon_cpu = 0; + + send_pause ^= 1; + + // kick off the next packet + // FIXME set packet number in packet + +#if 0 + bp_send_from_buf(0, PORT_ETH, 1, 0, 255); // 1KB total + + while ((buffer_pool_status->status & (BPS_DONE_0|BPS_ERROR_0)) == 0) + ; + bp_clear_buf(0); +#endif + + output_regs->leds = ((++led_counter) & 0x1) | (link_is_up ? 0x2 : 0x0); + } + } + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/hello.c b/firmware/microblaze/apps/hello.c new file mode 100644 index 000000000..bce843093 --- /dev/null +++ b/firmware/microblaze/apps/hello.c @@ -0,0 +1,30 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "u2_init.h" +#include "stdio.h" + +int +main(void) +{ + u2_init(); + + puts("Hello World"); + puts("Goodbye World"); + + return 0; +} diff --git a/firmware/microblaze/apps/ibs_rx_test.c b/firmware/microblaze/apps/ibs_rx_test.c new file mode 100644 index 000000000..bdc04747e --- /dev/null +++ b/firmware/microblaze/apps/ibs_rx_test.c @@ -0,0 +1,82 @@ +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "nonstdio.h" + +#define PORT 2 // ethernet = 2, serdes = 0 +int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; +int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; + +int buffer_state[4]; + +static void __attribute__((unused)) +wait_until_status_nonzero(void) +{ + while (buffer_pool_status->status == 0) + ; +} + +int +main(void) +{ + int i; + + u2_init(); + + output_regs->adc_ctrl = 0x0A; + + dsp_rx_regs->freq = 0; + dsp_rx_regs->scale_iq = (1 << 16) | 1; + dsp_rx_regs->decim_rate = 8; + + volatile unsigned int *buffer0 = buffer_ram(0); + volatile unsigned int *buffer1 = buffer_ram(1); + volatile unsigned int *buffer2 = buffer_ram(2); + + putstr("Starting RX\n"); + bp_clear_buf(0); + bp_receive_to_buf(0, 1, 1, 0, 99); + + dsp_rx_regs->rx_command = (50 << 9) | 100; // Numlines, lines per frame + dsp_rx_regs->rx_time = 0x2000; + + dsp_rx_regs->rx_command = (137 << 9) | 50; // Numlines, lines per frame + dsp_rx_regs->rx_time = 0x2200; + + while (buffer_pool_status->status == 0) + ; + bp_clear_buf(0); + bp_clear_buf(1); + bp_receive_to_buf(1, 1, 1, 0, 99); + while (buffer_pool_status->status == 0) + ; + bp_clear_buf(2); + bp_receive_to_buf(2, 1, 1, 0, 99); + while (buffer_pool_status->status == 0) + ; + + for(i=0;i<100;i++) { + puthex(i); + putstr(" "); + puthex_nl(buffer0[i]); + } + for(i=0;i<60;i++) { + puthex(i); + putstr(" "); + puthex_nl(buffer1[i]); + } + for(i=0;i<60;i++) { + puthex(i); + putstr(" "); + puthex_nl(buffer2[i]); + } + //while(timer_regs -> time < 0x6000) + // {} + + putstr("Done\n"); + hal_finish(); + + return 1; +} diff --git a/firmware/microblaze/apps/ibs_tx_test.c b/firmware/microblaze/apps/ibs_tx_test.c new file mode 100644 index 000000000..ff9446d92 --- /dev/null +++ b/firmware/microblaze/apps/ibs_tx_test.c @@ -0,0 +1,160 @@ +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "nonstdio.h" + +// Globals +#define EMPTY 0 +#define FILLING 1 +#define FULL 2 +#define EMPTYING 3 + +#define PORT 2 // ethernet = 2, serdes = 0 +int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; +int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; + +int buffer_state[4]; + +static void +wait_until_status_nonzero(void) +{ + while (buffer_pool_status->status == 0) + ; +} + +int +main(void) +{ + int i; + + u2_init(); + + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (1 << 16) | 1; + dsp_tx_regs->interp_rate = 8; + + // Write data to be sent into the first buffer + volatile unsigned int *buffer0 = buffer_ram(0); + volatile unsigned int *buffer1 = buffer_ram(1); + + + putstr("Starting to fill in RAM\n"); + for(i=0;i<512;i++) + buffer0[i] = i; + putstr("Filled in RAM\n"); + + buffer0[0] = 7; // start and end of buffer, send immediately + buffer0[1] = 0x0000; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + while(timer_regs -> time < 0x6000) + {} + + buffer0[0] = 3; // start and end of buffer + buffer0[1] = 0x8000; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + while(timer_regs -> time < 0x8400) + {} + + buffer0[0] = 3; // start and end of buffer + buffer0[1] = 0x8800; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + while(timer_regs -> time < 0x9000) + {} + + buffer0[0] = 0x2; // not last + buffer0[1] = 0x9100; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + buffer0[0] = 0x1; // last + buffer0[1] = 0x0000; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + + + buffer0[0] = 0x3; // first and last + buffer0[1] = 0x8000; // Time in the past + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + + /* + buffer0[0] = 0x2; // not last + buffer0[1] = 0x9600; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + */ + + while(timer_regs -> time < 0xa000) + {} + + putstr("Done\n"); + + while(1) + {} + hal_finish(); + + // Send a bunch, let them pile up in FIFO + bp_send_from_buf(0, 2, 1, 21, 80); wait_until_status_nonzero(); + bp_clear_buf(0); + putstr("First add'l TX done\n"); + bp_send_from_buf(0, 2, 1, 81, 288); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 289, 292); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 293, 326); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 327, 399); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 400, 511); wait_until_status_nonzero(); + bp_clear_buf(0); + putstr("All add'l TX done\n"); + + bp_receive_to_buf(1, 2, 1, 21, 80); wait_until_status_nonzero(); + bp_clear_buf(1); + putstr("First add'l RX done\n"); + bp_receive_to_buf(1, 2, 1, 81, 288); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 289, 292); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 293, 326); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 327, 399); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 400, 511); wait_until_status_nonzero(); + bp_clear_buf(1); + putstr("All add'l RX done\n"); + + for(i=0;i<512;i++) + if(buffer0[i] != buffer1[i]) { + putstr("ERROR at location: "); + puthex_nl(i); + putstr("Value sent: "); + puthex_nl(buffer0[i]); + putstr("Value rcvd: "); + puthex_nl(buffer1[i]); + //break; + } + + putstr("Done Testing\n"); + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/mimo_app_common_v2.c b/firmware/microblaze/apps/mimo_app_common_v2.c new file mode 100644 index 000000000..5dbecb0d0 --- /dev/null +++ b/firmware/microblaze/apps/mimo_app_common_v2.c @@ -0,0 +1,582 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "mimo_app_common_v2.h" +#include "buffer_pool.h" +#include "memcpy_wa.h" +#include "ethernet.h" +#include "nonstdio.h" +#include "print_rmon_regs.h" +#include "db.h" +#include "db_base.h" +#include "clocks.h" +#include "u2_init.h" +#include <string.h> + +volatile bool link_is_up = false; // eth handler sets this +int cpu_tx_buf_dest_port = PORT_ETH; + +// If this is non-zero, this dbsm could be writing to the ethernet +dbsm_t *ac_could_be_sending_to_eth; + +static unsigned char exp_seqno __attribute__((unused)) = 0; + +void abort(void); + +static bool +burn_mac_addr(const op_burn_mac_addr_t *p) +{ + return ethernet_set_mac_addr(&p->addr); +} + +static bool +sync_to_pps(const op_generic_t *p) +{ + timesync_regs->sync_on_next_pps = 1; + putstr("SYNC to PPS\n"); + return true; +} + +static bool +config_mimo_cmd(const op_config_mimo_t *p) +{ + clocks_mimo_config(p->flags); + return true; +} + +void +set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) +{ + reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; + reply_pkt->ehdr.src = *ethernet_mac_addr(); + reply_pkt->ehdr.ethertype = U2_ETHERTYPE; + reply_pkt->thdr.flags = 0; + reply_pkt->thdr.fifo_status = 0; // written by protocol engine + reply_pkt->thdr.seqno = 0; // written by protocol engine + reply_pkt->thdr.ack = 0; // written by protocol engine + u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); + reply_pkt->fixed.timestamp = timer_regs->time; +} + +static void +send_reply(unsigned char *reply, size_t reply_len) +{ + if (reply_len < 64) + reply_len = 64; + + // wait for buffer to become idle + hal_set_leds(0x4, 0x4); + while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) + ; + hal_set_leds(0x0, 0x4); + + // copy reply into CPU_TX_BUF + memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); + + // wait until nobody else is sending to the ethernet + if (ac_could_be_sending_to_eth){ + hal_set_leds(0x8, 0x8); + dbsm_wait_for_opening(ac_could_be_sending_to_eth); + hal_set_leds(0x0, 0x8); + } + + if (0){ + printf("sending_reply to port %d, len = %d\n", cpu_tx_buf_dest_port, (int)reply_len); + print_buffer(buffer_ram(CPU_TX_BUF), reply_len/4); + } + + // fire it off + bp_send_from_buf(CPU_TX_BUF, cpu_tx_buf_dest_port, 1, 0, reply_len/4); + + // wait for it to complete (not long, it's a small pkt) + while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) + ; + + bp_clear_buf(CPU_TX_BUF); +} + + +static size_t +op_id_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_id_reply_t *r = (op_id_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) // no room + return 0; + + // Build reply subpacket + + r->opcode = OP_ID_REPLY; + r->len = sizeof(op_id_reply_t); + r->rid = p->rid; + r->addr = *ethernet_mac_addr(); + r->hw_rev = (u2_hw_rev_major << 8) | u2_hw_rev_minor; + // r->fpga_md5sum = ; // FIXME + // r->sw_md5sum = ; // FIXME + + return r->len; +} + + +static size_t +config_tx_v2_cmd(const op_config_tx_v2_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_config_tx_reply_v2_t *r = (op_config_tx_reply_v2_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + struct tune_result tune_result; + memset(&tune_result, 0, sizeof(tune_result)); + + bool ok = true; + +#if 0 + if (p->valid & CFGV_GAIN){ + ok &= db_set_gain(tx_dboard, p->gain); + } + + if (p->valid & CFGV_FREQ){ + bool was_streaming = is_streaming(); + if (was_streaming) + stop_rx_cmd(); + + u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); + bool tune_ok = db_tune(tx_dboard, f, &tune_result); + ok &= tune_ok; + print_tune_result("Tx", tune_ok, f, &tune_result); + + if (was_streaming) + restart_streaming(); + } + + if (p->valid & CFGV_INTERP_DECIM){ + int interp = p->interp; + int hb1 = 0; + int hb2 = 0; + + if (!(interp & 1)){ + hb2 = 1; + interp = interp >> 1; + } + + if (!(interp & 1)){ + hb1 = 1; + interp = interp >> 1; + } + + if (interp < MIN_CIC_INTERP || interp > MAX_CIC_INTERP) + ok = false; + else { + dsp_tx_regs->interp_rate = (hb1<<9) | (hb2<<8) | interp; + // printf("Interp: %d, register %d\n", p->interp, (hb1<<9) | (hb2<<8) | interp); + } + } + + if (p->valid & CFGV_SCALE_IQ){ + dsp_tx_regs->scale_iq = p->scale_iq; + } +#endif + + // Build reply subpacket + + r->opcode = OP_CONFIG_TX_REPLY_V2; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + r->inverted = tune_result.inverted; + r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); + r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); + r->duc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); + r->duc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); + r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); + r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); + return r->len; +} + +static size_t +config_rx_v2_cmd(const op_config_rx_v2_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_config_rx_reply_v2_t *r = (op_config_rx_reply_v2_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + struct tune_result tune_result; + memset(&tune_result, 0, sizeof(tune_result)); + + bool ok = true; + + if (p->valid & CFGV_GAIN){ + ok &= db_set_gain(rx_dboard, p->gain); + } + + if (p->valid & CFGV_FREQ){ + bool was_streaming = is_streaming(); + if (was_streaming) + stop_rx_cmd(); + + u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); + bool tune_ok = db_tune(rx_dboard, f, &tune_result); + ok &= tune_ok; + print_tune_result("Rx", tune_ok, f, &tune_result); + + if (was_streaming) + restart_streaming(); + } + + if (p->valid & CFGV_INTERP_DECIM){ + int decim = p->decim; + int hb1 = 0; + int hb2 = 0; + + if(!(decim & 1)) { + hb2 = 1; + decim = decim >> 1; + } + + if(!(decim & 1)) { + hb1 = 1; + decim = decim >> 1; + } + + if (decim < MIN_CIC_DECIM || decim > MAX_CIC_DECIM) + ok = false; + else { + dsp_rx_regs->decim_rate = (hb1<<9) | (hb2<<8) | decim; + // printf("Decim: %d, register %d\n", p->decim, (hb1<<9) | (hb2<<8) | decim); + } + } + + if (p->valid & CFGV_SCALE_IQ){ + dsp_rx_regs->scale_iq = p->scale_iq; + } + + // Build reply subpacket + + r->opcode = OP_CONFIG_RX_REPLY_V2; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + r->inverted = tune_result.inverted; + r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); + r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); + r->ddc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); + r->ddc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); + r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); + r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); + + return r->len; +} + +static size_t +read_time_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_read_time_reply_t *r = (op_read_time_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_READ_TIME_REPLY; + r->len = sizeof(*r); + r->rid = p->rid; + r->time = timer_regs->time; + + return r->len; +} + +static void +fill_db_info(u2_db_info_t *p, const struct db_base *db) +{ + p->dbid = db->dbid; + p->freq_min_hi = u2_fxpt_freq_hi(db->freq_min); + p->freq_min_lo = u2_fxpt_freq_lo(db->freq_min); + p->freq_max_hi = u2_fxpt_freq_hi(db->freq_max); + p->freq_max_lo = u2_fxpt_freq_lo(db->freq_max); + p->gain_min = db->gain_min; + p->gain_max = db->gain_max; + p->gain_step_size = db->gain_step_size; +} + +static size_t +dboard_info_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_dboard_info_reply_t *r = (op_dboard_info_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_DBOARD_INFO_REPLY; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = true; + + fill_db_info(&r->tx_db_info, tx_dboard); + fill_db_info(&r->rx_db_info, rx_dboard); + + return r->len; +} + +static size_t +peek_cmd(const op_peek_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + + putstr("peek: addr="); puthex32(p->addr); + printf(" bytes=%u\n", p->bytes); + + if ((reply_payload_space < (sizeof(*r) + p->bytes)) || + p->bytes > MAX_SUBPKT_LEN - sizeof(op_generic_t)) { + putstr("peek: insufficient reply packet space\n"); + return 0; // FIXME do partial read? + } + + r->opcode = OP_PEEK_REPLY; + r->len = sizeof(*r)+p->bytes; + r->rid = p->rid; + r->ok = true; + + memcpy_wa(reply_payload+sizeof(*r), (void *)p->addr, p->bytes); + + return r->len; +} + +static bool +poke_cmd(const op_poke_t *p) +{ + int bytes = p->len - sizeof(*p); + putstr("poke: addr="); puthex32(p->addr); + printf(" bytes=%u\n", bytes); + + uint8_t *src = (uint8_t *)p + sizeof(*p); + memcpy_wa((void *)p->addr, src, bytes); + + return true; +} + +static size_t +generic_reply(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space, + bool ok) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = p->opcode | OP_REPLY_BIT; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + + return r->len; +} + +static size_t +add_eop(void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_EOP; + r->len = sizeof(*r); + r->rid = 0; + r->ok = 0; + + return r->len; +} + +void +handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) +{ + unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; + unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; + int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); + + // initialize reply + memset(reply, 0, sizeof(reply)); + set_reply_hdr((u2_eth_packet_t *) reply, pkt); + + // point to beginning of payload (subpackets) + unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); + int payload_len = len - sizeof(u2_eth_packet_t); + + size_t subpktlen = 0; + + while (payload_len >= sizeof(op_generic_t)){ + const op_generic_t *gp = (const op_generic_t *) payload; + subpktlen = 0; + + // printf("\nopcode = %d\n", gp->opcode); + + switch(gp->opcode){ + case OP_EOP: // end of subpackets + goto end_of_subpackets; + + case OP_ID: + subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_CONFIG_TX_V2: + subpktlen = config_tx_v2_cmd((op_config_tx_v2_t *) payload, + reply_payload, reply_payload_space); + break; + + case OP_CONFIG_RX_V2: + subpktlen = config_rx_v2_cmd((op_config_rx_v2_t *) payload, + reply_payload, reply_payload_space); + break; + + case OP_START_RX_STREAMING: + start_rx_streaming_cmd(&pkt->ehdr.src, (op_start_rx_streaming_t *) payload); + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); + break; + + case OP_STOP_RX: + stop_rx_cmd(); + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); + break; + + case OP_BURN_MAC_ADDR: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + burn_mac_addr((op_burn_mac_addr_t *) payload)); + break; + + case OP_CONFIG_MIMO: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + config_mimo_cmd((op_config_mimo_t *) payload)); + break; + + case OP_READ_TIME: + subpktlen = read_time_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_DBOARD_INFO: + subpktlen = dboard_info_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_SYNC_TO_PPS: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + sync_to_pps((op_generic_t *) payload)); + break; + + case OP_PEEK: + subpktlen = peek_cmd((op_peek_t *)payload, reply_payload, reply_payload_space); + break; + + case OP_POKE: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + poke_cmd((op_poke_t *)payload)); + break; + + default: + printf("app_common_v2: unhandled opcode = %d\n", gp->opcode); + break; + } + + int t = (gp->len + 3) & ~3; // bump to a multiple of 4 + payload += t; + payload_len -= t; + + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + } + + end_of_subpackets: + + // add the EOP marker + subpktlen = add_eop(reply_payload, reply_payload_space); + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + + send_reply(reply, reply_payload - reply); +} + + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +int +eth_pkt_inspector(bsm12_t *sm, int bufno) +{ + u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; + + //static size_t last_len = 0; + + // hal_toggle_leds(0x1); + + // inspect rcvd frame and figure out what do do. + + if (pkt->ehdr.ethertype != U2_ETHERTYPE) + return true; // ignore, probably bogus PAUSE frame from MAC + + int chan = u2p_chan(&pkt->fixed); + + switch (chan){ + case CONTROL_CHAN: + handle_control_chan_frame(pkt, byte_len); + return -1; + break; + + case 0: + return 0; // pass it off to DSP TX + + case 1: + return 1; // pass it off to SERDES TX + + default: + abort(); + break; + } +} + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + link_is_up = speed != 0; + hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); + printf("\neth link changed: speed = %d\n", speed); +} + + +void +print_tune_result(char *msg, bool tune_ok, + u2_fxpt_freq_t target_freq, struct tune_result *r) +{ +#if 0 + printf("db_tune %s %s\n", msg, tune_ok ? "true" : "false"); + putstr(" target_freq "); print_fxpt_freq(target_freq); newline(); + putstr(" baseband_freq "); print_fxpt_freq(r->baseband_freq); newline(); + putstr(" dxc_freq "); print_fxpt_freq(r->dxc_freq); newline(); + putstr(" residual_freq "); print_fxpt_freq(r->residual_freq); newline(); + printf(" inverted %s\n", r->inverted ? "true" : "false"); +#endif +} diff --git a/firmware/microblaze/apps/mimo_app_common_v2.h b/firmware/microblaze/apps/mimo_app_common_v2.h new file mode 100644 index 000000000..1e62ced37 --- /dev/null +++ b/firmware/microblaze/apps/mimo_app_common_v2.h @@ -0,0 +1,63 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_APP_COMMON_H +#define INCLUDED_APP_COMMON_H + +#include <stdbool.h> +#include "usrp2_eth_packet.h" +#include "bsm12.h" +#include "memory_map.h" +#include "hal_io.h" +#include <stddef.h> +#include <db.h> + +#define CPU_TX_BUF 7 // cpu -> eth + +#define _AL4 __attribute__((aligned (4))) + +extern volatile bool link_is_up; // eth handler sets this + +// If there's a dbsm that sends to the ethernet, put it's address here +extern dbsm_t *ac_could_be_sending_to_eth; + +extern int cpu_tx_buf_dest_port; + +void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); + +/* + * Called when an ethernet packet is received. + */ +int eth_pkt_inspector(bsm12_t *sm, int bufno); + + +void link_changed_callback(int speed); + +void +print_tune_result(char *msg, bool tune_ok, + u2_fxpt_freq_t target_freq, struct tune_result *r); + + +void start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p); +void stop_rx_cmd(void); +void restart_streaming(void); +bool is_streaming(void); + +void handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); + +#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/mimo_tx.c b/firmware/microblaze/apps/mimo_tx.c new file mode 100644 index 000000000..e0f8aa6fa --- /dev/null +++ b/firmware/microblaze/apps/mimo_tx.c @@ -0,0 +1,363 @@ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This is a down and dirty test program that confirms that the we can + * coherently transmit different signals to two USRP2s connected via a + * mimo cable. This code runs in the USRP2 connected to the ethernet. + * The other USRP runs mimo_tx_slave. The host runs test_mimo_tx. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "bsm12.h" +#include "mimo_app_common_v2.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include "clocks.h" + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Experimental code to transmit packets to DSP Tx and SERDES + * + * Hard wire the Tx config so we don't have to deal with control stuff yet. + */ + +#define BUF_BSM12_0 4 +#define BUF_BSM12_1 5 +#define BUF_BSM12_2 6 + +//#define CPU_TX_BUF 7 // cpu -> eth + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from ethernet +buf_cmd_args_t bsm12_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t bsm12_send0_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +// send to SERDES +buf_cmd_args_t bsm12_send1_args = { + PORT_SERDES, + 0, // starts just past transport header + 0 // filled in from last_line register +}; + +bsm12_t bsm12_sm; // the state machine + +#if 0 +/* + * ================================================================ + * configure DSP RX double buffering state machine (dsp -> eth) + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine +#endif + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ +#if 0 + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +#endif +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ +#if 0 + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +#endif +} + + +void +stop_rx_cmd(void) +{ +#if 0 + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +#endif +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + + int tx_scale = 2500; + int interp = 8; // * 4 + + // setup some defaults + + dsp_tx_regs->freq = 429496730; // 10MHz + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; +} + + +#if 0 +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +int +fw_sets_seqno_inspector(bsm12_t *sm, int buf_this) +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + bsm12_process_status(&bsm12_sm, status); +} + +int +main(void) +{ + u2_init(); + + putstr("\nMIMO Tx\n"); + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + + output_regs->debug_mux_ctrl = 1; +#if 0 + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + bsm12_init(&bsm12_sm, BUF_BSM12_0, + &bsm12_recv_args, &bsm12_send0_args, &bsm12_send1_args, + eth_pkt_inspector); + + +#if 0 + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; +#endif + + + // program tx registers + setup_tx(); + + // kick off the state machine + bsm12_start(&bsm12_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + // dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + // dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/mimo_tx_slave.c b/firmware/microblaze/apps/mimo_tx_slave.c new file mode 100644 index 000000000..cdf9c03c2 --- /dev/null +++ b/firmware/microblaze/apps/mimo_tx_slave.c @@ -0,0 +1,376 @@ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This is a down and dirty test program that confirms that the we can + * coherently transmit different signals to two USRP2s connected via a + * mimo cable. This code runs in the USRP2 NOT connected to the + * ethernet. The USRP connected to the ethernet runs mimo_tx. The + * host runs test_mimo_tx. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include "clocks.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between serdes and DSP pipelines + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow + * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> serdes +#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // serdes -> dsp tx + +/* + * ================================================================== + * configure DSP TX double buffering state machine (serdes -> dsp) + * ================================================================== + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from serdes +buf_cmd_args_t dsp_tx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ================================================================= + * configure DSP RX double buffering state machine (dsp -> serdes) + * ================================================================= + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to serdes +buf_cmd_args_t dsp_rx_send_args = { + PORT_SERDES, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +} + + +void +stop_rx_cmd(void) +{ + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 2500; + int interp = 8; // * 4 + + // setup some defaults + + dsp_tx_regs->freq = 429496730; // 10MHz + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; +} + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + // hal_toggle_leds(LED_A); + + uint32_t status = buffer_pool_status->status; + + if (0 && (status & ~BPS_IDLE_ALL)){ + putstr("status = "); + puthex32_nl(status); + } + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + output_regs->led_src = 0x3; // h/w controls bottom two bits + clocks_enable_test_clk(true, 1); + + putstr("\nMIMO Tx Slave\n"); + + cpu_tx_buf_dest_port = PORT_SERDES; + + // ethernet_register_link_changed_callback(link_changed_callback); + // ethernet_init(); + + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + // puts("post clocks_mimo_config"); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + +#if 0 + output_regs->debug_mux_ctrl = 1; + hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); + hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + //output_regs->flush_icache = 1; + + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // puts("post dbsm_init's"); + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // program tx registers + setup_tx(); + + // puts("post setup_tx"); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + // puts("post dbsm_start"); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/rcv_eth_packets.c b/firmware/microblaze/apps/rcv_eth_packets.c new file mode 100644 index 000000000..03fc94354 --- /dev/null +++ b/firmware/microblaze/apps/rcv_eth_packets.c @@ -0,0 +1,233 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> + + +// ---------------------------------------------------------------- + +static eth_mac_addr_t dst_mac_addr = + {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; + + +// ---------------------------------------------------------------- + +#define PACKET_SIZE 1500 // bytes +#define ETH_DATA_RATE 1000000 // 1MB/s +#define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s + +#define TIMER_RATE 100000000 // 100 MHz clock + +static int timer_delta = TIMER_RATE/ETH_PACKET_RATE; // ticks between interrupts + +static volatile bool send_packet_now = false; // timer handler sets this +static volatile bool link_is_up = false; // eth handler sets this + +int packet_number = 0; + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + putstr("\neth link changed: speed = "); + puthex16_nl(speed); +} + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = 1; +} + + +void +buffer_irq_handler(unsigned irq) +{ + // FIXME +} + +static void +init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) +{ + int i = 0; + int mark = ((bufnum & 0xff) << 24) | 0x005A0000; + + for (i = 0; i < BP_NLINES; i++){ + buf[i] = mark | i; + mark ^= 0x00FF0000; + } + + // copy header into buffer + memcpy_wa(buf, pkt, sizeof(*pkt)); +} + +static void +init_packets(void) +{ + int i; + + u2_eth_packet_t pkt __attribute__((aligned (4))); + + pkt.ehdr.dst = dst_mac_addr; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + + // fill ALL buffers for debugging + for (i = 0; i < 8; i++) + init_packet((void *)buffer_ram(i), &pkt, i); +} + +int +main(void) +{ + u2_init(); + + int prev_leds = -1; + int new_leds = 0x00; + output_regs->leds = 0x00; + + int peak_hold_count = 0; + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\nrcv_eth_packets\n"); + + init_packets(); + + // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now + + // FIXME turn off timer since I don't think MTS and MFS instructions are implemented + // pic_register_handler(IRQ_TIMER, timer_irq_handler); + // hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + //eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 + + // kick off a receive + bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); + + while(1){ + // u2_eth_packet_t pkt; + + new_leds = 0; + if (link_is_up) + new_leds = 0x2; + + if ((buffer_pool_status->status & (BPS_DONE_2|BPS_ERROR_2)) != 0){ + // we've got a packet! + +#if 0 + // copy to stack buffer so we can byte address it + memcpy_wa(&pkt, (void *)buffer_ram(2), sizeof(pkt)); + + putstr("Rx: src: "); + print_mac_addr(pkt.ehdr.dst_addr); + putstr(" dst: "); + print_mac_addr(pkt.ehdr.src_addr); + putstr(" ethtype: "); + puthex16(pkt.ehdr.ethertype); + putstr(" len: "); + int len = (buffer_pool_status->last_line[2] + 1) * 4; + puthex16_nl(len); +#else + volatile int *bp = buffer_ram(2); + int i; + for (i = 0; i < 16; i++){ + puthex8(i); + putchar(':'); + puthex32_nl(bp[i]); + } +#endif + + // kick off next receive + bp_clear_buf(2); + bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); + + peak_hold_count = 2048 * 10; + } + + if (peak_hold_count > 0){ + peak_hold_count--; + new_leds |= 0x1; + } + + if (new_leds != prev_leds){ + prev_leds = new_leds; + output_regs->leds = new_leds; + } + } + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/read_dbids.c b/firmware/microblaze/apps/read_dbids.c new file mode 100644 index 000000000..24c6d9ab4 --- /dev/null +++ b/firmware/microblaze/apps/read_dbids.c @@ -0,0 +1,59 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <nonstdio.h> +#include <u2_init.h> +#include <stdbool.h> +#include <usrp2_i2c_addr.h> +#include <i2c.h> + + +int main(void) +{ + u2_init(); + + puts("\nread_dbids"); + + unsigned char dbid_tx[2]; + unsigned char dbid_rx[2]; + bool ok; + + ok = eeprom_read(I2C_ADDR_TX_A, 1, dbid_tx, 2); + if (!ok){ + puts("failed to read Tx Daugherboard EEPROM"); + } + else { + putstr("Tx Daugherboard ID: "); + puthex8(dbid_tx[1]); // MSB + puthex8(dbid_tx[0]); // LSB + newline(); + } + + ok = eeprom_read(I2C_ADDR_RX_A, 1, dbid_rx, 2); + if (!ok){ + puts("failed to read Rx Daugherboard EEPROM"); + } + else { + putstr("Rx Daugherboard ID: "); + puthex8(dbid_rx[1]); // MSB + puthex8(dbid_rx[0]); // LSB + newline(); + } + + return 0; +} diff --git a/firmware/microblaze/apps/sd_bounce.c b/firmware/microblaze/apps/sd_bounce.c new file mode 100644 index 000000000..c1b48f170 --- /dev/null +++ b/firmware/microblaze/apps/sd_bounce.c @@ -0,0 +1,153 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * Loopback SERDES to SERDES + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "nonstdio.h" +#include "memset_wa.h" +#include <dbsm.h> +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include <clocks.h> + + + +// ---------------------------------------------------------------- + +#define SERDES_RX_BUF_0 0 +#define SERDES_RX_BUF_1 1 + +/* + * ================================================================ + * configure SD RX double buffering state machine + * ================================================================ + */ + +// receive from SERDES +buf_cmd_args_t sd_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to SERDES +buf_cmd_args_t sd_send_args = { + PORT_SERDES, + 0, // starts with packet in line 0 + 0, // filled in from list_line register +}; + +dbsm_t sd_sm; // the state machine + + + + +// ---------------------------------------------------------------- + +#if 0 +static bool +check_packet(int *buf, int nlines) +{ + bool ok = true; + int i = 0; + for (i = 0; i < nlines; i++){ + int expected = ((2*i + 0) << 16) | (2*i+1); + if (buf[i] != expected){ + ok = false; + printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); + } + } + return ok; +} + +static void +zero_buffer(int bufno) +{ + memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); +} +#endif + + +bool +sd_rx_inspector(dbsm_t *sm, int buf_this) +{ + hal_toggle_leds(0x2); + +#if 0 + int last_line = buffer_pool_status->last_line[buf_this]; + bool ok = check_packet(buffer_ram(buf_this), last_line); + static int good = 0; + static int bad = 0; + + if (ok) + good++; + else + bad++; + + if(good+bad == 10000) { + printf("Good %d\tBad %d\n",good,bad); + good = 0; + bad = 0; + } +#endif + + return false; +} + + +inline static void +buffer_irq_handler(void) +{ + uint32_t status = buffer_pool_status->status; + dbsm_process_status(&sd_sm, status); +} + + +int +main(void) +{ + u2_init(); + + putstr("\nsd_bounce\n"); + + // Get our clock from the mimo interface + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + dbsm_init(&sd_sm, SERDES_RX_BUF_0, + &sd_recv_args, &sd_send_args, + sd_rx_inspector); + + // kick off the state machine + dbsm_start(&sd_sm); + + while(1){ + buffer_irq_handler(); + } +} diff --git a/firmware/microblaze/apps/sd_gentest.c b/firmware/microblaze/apps/sd_gentest.c new file mode 100644 index 000000000..35e912615 --- /dev/null +++ b/firmware/microblaze/apps/sd_gentest.c @@ -0,0 +1,269 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "nonstdio.h" +#include "memset_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include <clocks.h> +#include <mdelay.h> + +// ---------------------------------------------------------------- + +int packet_number = 0; +volatile bool send_packet_now = 0; + +#define SERDES_TX_BUF 0 +#define SERDES_RX_BUF 1 + + +#define NLINES_PER_PKT 380 + + +// ---------------------------------------------------------------- + +//static int timer_delta = (int)(MASTER_CLK_RATE * 100e-6); +static int timer_delta = 1000000; // .01 second + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = true; +} + + +static void +init_packet(int *buf) +{ + int i = 0; + for (i = 0; i < BP_NLINES; i++){ + buf[i] = ((2*i + 0) << 16) | (2*i+1); + } +} + +static bool +check_packet(int *buf, int nlines) +{ + bool ok = true; + int i = 0; + for (i = 0; i < nlines; i++){ + int expected = ((2*i + 0) << 16) | (2*i+1); + if (buf[i] != expected){ + ok = false; + printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); + } + } + return ok; +} + +static void +zero_buffer(int bufno) +{ + memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); +} + +static void +init_packets(void) +{ + // init just the one we're using + init_packet(buffer_ram(SERDES_TX_BUF)); +} + +int +main(void) +{ + u2_init(); + + // We're free running and provide clock to the MIMO interface + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + // output_regs->debug_mux_ctrl = 1; + // hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + // hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\nsd_gentest\n"); + + // Set up serdes (already enabled) + //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN | SERDES_LOOPEN); + //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN); + + init_packets(); + + // pic_register_handler(IRQ_TIMER, timer_irq_handler); + + //if (hwconfig_simulation_p()) + // timer_delta = sim_timer_delta; + + // start a receive from sd + zero_buffer(SERDES_RX_BUF); + bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); + + // fire off the first packet + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + hal_set_timeout(timer_delta); + int ready_to_send = 0; + + int counter __attribute__((unused)) = 0; + int sent = 1; + int txerr = 0; + int rxerr = 0; + int rcvd = 0; + int rxcrc = 0; + int sent_acc = 0; + int txerr_acc = 0; + int rxerr_acc = 0; + int rcvd_acc = 0; + int rxcrc_acc = 0; + +#define EXPECTING_PKT() ((counter & 0x1) == 0) +#define SEND_PKT() ((counter & 0x1) != 0) + + bool got_packet = false; + + while(1){ + uint32_t status = buffer_pool_status->status; + + if (status & (BPS_DONE(SERDES_RX_BUF))){ + bp_clear_buf(SERDES_RX_BUF); + got_packet = true; + + //hal_toggle_leds(0x2); + + // check packet + int last_line = buffer_pool_status->last_line[SERDES_RX_BUF]-1; + bool ok = check_packet(buffer_ram(SERDES_RX_BUF), last_line); + + if (ok) { + rcvd++; + //putchar('r'); + } + else { + rcvd++; + rxcrc++; + //putchar('P'); + } + // start a receive from sd + zero_buffer(SERDES_RX_BUF); + bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); + } + + if (status & (BPS_ERROR(SERDES_RX_BUF))){ + bp_clear_buf(SERDES_RX_BUF); + got_packet = true; + rcvd++; + rxerr++; + //putchar('E'); + + // start a receive from sd + zero_buffer(SERDES_RX_BUF); + bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); + } + + if (status & (BPS_DONE(SERDES_TX_BUF))){ + bp_clear_buf(SERDES_TX_BUF); + //putchar('t'); + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + //mdelay(1); + int i; + for (i = 0; i < 50; i++){ + asm volatile ("or r0, r0, r0\n\ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n"); + } + sent ++; + ready_to_send = 1; + //hal_toggle_leds(0x1); + } + + if (status & BPS_ERROR(SERDES_TX_BUF)){ + bp_clear_buf(SERDES_TX_BUF); + sent++; + txerr++; + ready_to_send = 1; + //putchar('X'); + } + + if(sent >=1000) { + printf("Status\tSENT %d\tTXERR %d\t",sent,txerr); + printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n",rcvd, rxerr, rxcrc, sent-rcvd); + sent_acc += sent; sent = 0; + txerr_acc += txerr; txerr = 0; + rcvd_acc += rcvd; rcvd = 0; + rxerr_acc += rxerr; rxerr = 0; + rxcrc_acc += rxcrc; rxcrc = 0; + } + + if(sent_acc >=10000) { + printf("\nOverall\tSENT %d\tTXERR %d\t",sent_acc,txerr_acc); + printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n\n",rcvd_acc, rxerr_acc, rxcrc_acc, sent_acc-rcvd_acc); + sent_acc = 0; + txerr_acc = 0; + rcvd_acc = 0; + rxerr_acc = 0; + rxcrc_acc = 0; + } +#if 0 + int pending = pic_regs->pending; + if (pending & PIC_TIMER_INT){ + hal_set_timeout(timer_delta); + + /* + if (EXPECTING_PKT()){ + if (!got_packet) + putchar('T'); + got_packet = false; + } + + if (SEND_PKT()){ + if (status & BPS_IDLE(SERDES_TX_BUF)) + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + } + counter++; + */ + + putchar('T'); + if(ready_to_send) { + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + counter++; + ready_to_send = 0; + } + + pic_regs->pending = PIC_TIMER_INT; // clear pending interrupt + } +#endif + } + + return 0; +} diff --git a/firmware/microblaze/apps/serdes_to_dsp.c b/firmware/microblaze/apps/serdes_to_dsp.c new file mode 100644 index 000000000..4994e0a69 --- /dev/null +++ b/firmware/microblaze/apps/serdes_to_dsp.c @@ -0,0 +1,179 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +//#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + +/* + * ================================================================ + * configure DSP TX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + + +// ---------------------------------------------------------------- + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +void +start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) +{ +} + +void +stop_rx_cmd(void) +{ +} + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + op_config_tx_t def_config; + memset(&def_config, 0, sizeof(def_config)); + def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] + def_config.scale_iq = (tx_scale << 16) | tx_scale; + def_config.interp = interp; + + // setup Tx DSP regs + config_tx_cmd(&def_config); +} + + +inline static void +buffer_irq_handler(unsigned irq) +{ + //hal_toggle_leds(0x2); + + uint32_t status = buffer_pool_status->status; + + dbsm_process_status(&dsp_tx_sm, status); + + if (status & BPS_DONE(CPU_TX_BUF)){ + bp_clear_buf(CPU_TX_BUF); + } +} + +int +main(void) +{ + u2_init(); + + // Get our clock from the mimo interface + + clocks_enable_test_clk(true,1); + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\nserdes_to_dsp\n"); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + // program tx registers + setup_tx(); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + while(1){ + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + } +} + diff --git a/firmware/microblaze/apps/serdes_txrx.c b/firmware/microblaze/apps/serdes_txrx.c new file mode 100644 index 000000000..2c47c9628 --- /dev/null +++ b/firmware/microblaze/apps/serdes_txrx.c @@ -0,0 +1,368 @@ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include "clocks.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between serdes and DSP pipelines + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow + * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> serdes +#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // serdes -> dsp tx + +/* + * ================================================================== + * configure DSP TX double buffering state machine (serdes -> dsp) + * ================================================================== + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from serdes +buf_cmd_args_t dsp_tx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ================================================================= + * configure DSP RX double buffering state machine (dsp -> serdes) + * ================================================================= + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to serdes +buf_cmd_args_t dsp_rx_send_args = { + PORT_SERDES, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +} + + +void +stop_rx_cmd(void) +{ + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + // setup some defaults + + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = interp; +} + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + // hal_toggle_leds(LED_A); + + uint32_t status = buffer_pool_status->status; + + if (0 && (status & ~BPS_IDLE_ALL)){ + putstr("status = "); + puthex32_nl(status); + } + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + output_regs->led_src = 0x3; // h/w controls bottom two bits + clocks_enable_test_clk(true, 1); + + putstr("\nSERDES TxRx\n"); + + cpu_tx_buf_dest_port = PORT_SERDES; + + // ethernet_register_link_changed_callback(link_changed_callback); + // ethernet_init(); + + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + // puts("post clocks_mimo_config"); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + +#if 0 + output_regs->debug_mux_ctrl = 1; + hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); + hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + //output_regs->flush_icache = 1; + + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // puts("post dbsm_init's"); + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // program tx registers + setup_tx(); + + // puts("post setup_tx"); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + // puts("post dbsm_start"); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/set_hw_rev.c b/firmware/microblaze/apps/set_hw_rev.c new file mode 100644 index 000000000..d4ac8ff81 --- /dev/null +++ b/firmware/microblaze/apps/set_hw_rev.c @@ -0,0 +1,45 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <u2_init.h> +#include <nonstdio.h> +#include <i2c.h> +#include <usrp2_i2c_addr.h> + +#define HW_REV_MAJOR 0 +#define HW_REV_MINOR 3 + +int +main(void) +{ + u2_init(); + + putstr("\nset_hw_rev\n"); + + bool ok = true; + unsigned char maj = HW_REV_MAJOR; + unsigned char min = HW_REV_MINOR; + ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); + ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); + + if (ok) + printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + else + printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + + return 0; +} diff --git a/firmware/microblaze/apps/test1.c b/firmware/microblaze/apps/test1.c new file mode 100644 index 000000000..c3cc3be56 --- /dev/null +++ b/firmware/microblaze/apps/test1.c @@ -0,0 +1,282 @@ +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include "nonstdio.h" + +// Globals +#define EMPTY 0 +#define FILLING 1 +#define FULL 2 +#define EMPTYING 3 + +#define PORT 2 // ethernet = 2, serdes = 0 +int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; +int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; + +int buffer_state[4]; + + +void double_buffering(int port); + +// +// We register this in the secondary interrupt vector. +// It's called on buffer manager interrupts +// +void +buffer_irq_handler(unsigned irq) +{ + double_buffering(PORT); +} + +int +main(void) +{ + int i; + + u2_init(); + + // Control LEDs + output_regs->leds = 0x02; + + // Turn on ADCs + output_regs->adc_ctrl = 0x0A; + + // Set up TX Chain + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (1 << 16) | 1; + dsp_tx_regs->interp_rate = 8; + + // Set up RX Chain + dsp_rx_regs->freq = 0; + dsp_rx_regs->scale_iq = (1 << 16) | 1; + dsp_rx_regs->decim_rate = 8; + + // Set up buffer control, using only 4 for now + for(i=0;i<4;i++) + buffer_state[i] = EMPTY; + + // Set up DSP RX + buffer_state[0] = FILLING; + serdes_tx_idle = 1; + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines + + //dsp_rx_regs->run_rx = 1; // Start DSP_RX + putstr("Done DSP RX setup\n"); + + // Set up serdes RX + buffer_state[2] = FILLING; + dsp_tx_idle = 1; + bp_receive_to_buf(2, PORT, 1, 5, 504); + + while (buffer_pool_status->status == 0) // wait for completion of DSP RX + ; + + putstr("Done DSP TX setup\n"); + //dsp_tx_regs->run_tx = 1; + + // register interrupt handler + pic_register_handler(IRQ_BUFFER, buffer_irq_handler); + + while (1) + ; + + hal_finish(); + return 1; +} + +void +double_buffering(int port) { + unsigned int localstatus = buffer_pool_status->status; + + if(localstatus & BPS_DONE_0) { + bp_clear_buf(0); + if(buffer_state[0] == FILLING) { + buffer_state[0] = FULL; + if(buffer_state[1] == EMPTY) { + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[0] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines + buffer_state[0] = FILLING; + } + if(buffer_state[1] == FULL) { + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 0\n"); + } + if(localstatus & BPS_DONE_1) { + bp_clear_buf(1); + if(buffer_state[1] == FILLING) { + buffer_state[1] = FULL; + if(buffer_state[0] == EMPTY) { + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[0] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[1] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + if(buffer_state[0] == FULL) { + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 1\n"); + } + if(localstatus & BPS_DONE_2) { + bp_clear_buf(2); + if(buffer_state[2] == FILLING) { + buffer_state[2] = FULL; + if(buffer_state[3] == EMPTY) { + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines + buffer_state[3] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[2] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 + buffer_state[2] = FILLING; + } + if(buffer_state[3] == FULL) { + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 2\n"); + } + if(localstatus & BPS_DONE_3) { + bp_clear_buf(3); + if(buffer_state[3] == FILLING) { + buffer_state[3] = FULL; + if(buffer_state[2] == EMPTY) { + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines + buffer_state[2] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[3] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 + buffer_state[3] = FILLING; + } + if(buffer_state[2] == FULL) { + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 3\n"); + } +} + +// Spare Code + +#if 0 + // Set up LSDAC + int i = 0; + while(1) { + int command = (3 << 19) | (0 << 16) | (i & 0xffff); + spi_transact(SPI_TXONLY, SPI_SS_TX_DAC, command, 24, 1); // negate TX phase + i++; + } +#endif + +#if 0 + // Write to buffer 0 + int *buf = (int *)(BUFFER_BASE + BUFFER_0); + puthex_nl((int)buf); + + for(i=0;i<BUFFER_SIZE;i++) + buf[i] = i; + + putstr("Filled buffer 0\n"); + + // Write to buffer 1 + buf = (int *)(BUFFER_BASE + BUFFER_1); + puthex_nl((int)buf); + for(i=0;i<BUFFER_SIZE;i++) + buf[i] = i + ((i^0xFFFF) << 16); + + putstr("Filled buffer 1\n"); + +#endif + +#if 0 + // rx SERDES into buffer #2 (buf,port,step,fl,ll) + bp_receive_to_buf(2, 0, 1, 10, 300); + putstr("SERDES RX buffer setup\n"); + + // send SERDES from buffer #0 (buf,port,step,fl,ll) + bp_send_from_buf(0, 0, 1, 20, 200); + putstr("SERDES TX buffer setup\n"); + +#endif + +#if 0 + // send to DACs from buffer #1 + bp_send_from_buf(1 /*buf#*/, 1 /*port*/, 1 /*step*/, 20 /*fl*/, 250 /*ll*/); + putstr("DAC Buffer setup\n"); +#endif + +#if 0 + //putstr("ENTER INT\n"); + for(i=0;i<8;i++) + if(*status & (1<<i)) { + //putstr("Clearing buf "); + puthex_nl(i); + bp_clear_buf(i); + } + //putstr("EXIT INT\n"); +#endif diff --git a/firmware/microblaze/apps/test_db_spi.c b/firmware/microblaze/apps/test_db_spi.c new file mode 100644 index 000000000..f4fa98ef1 --- /dev/null +++ b/firmware/microblaze/apps/test_db_spi.c @@ -0,0 +1,35 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <u2_init.h> +#include <nonstdio.h> +#include <hal_io.h> +#include <spi.h> + +int +main(void) +{ + u2_init(); + + puts("\ntest_db_spi"); + + while(1){ + spi_transact(SPI_TXONLY, SPI_SS_RX_DB, 0xCC33, 16, SPIF_PUSH_FALL); + spi_transact(SPI_TXONLY, SPI_SS_TX_DB, 0x33CC, 16, SPIF_PUSH_FALL); + } +} diff --git a/firmware/microblaze/apps/test_i2c.c b/firmware/microblaze/apps/test_i2c.c new file mode 100644 index 000000000..f349ead88 --- /dev/null +++ b/firmware/microblaze/apps/test_i2c.c @@ -0,0 +1,108 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <stdio.h> +#include <stdint.h> +#include <u2_init.h> /* FIXME */ +#include <i2c.h> +#include <usrp2_i2c_addr.h> +#include <string.h> +#include <hal_io.h> + + + +#define ASSERT_TRUE(x) \ + do { \ + if (!(x)){ \ + printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + +#define ASSERT_FALSE(x) \ + do { \ + if (x){ \ + printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + + +#define BUFSIZE 128 + +int +main(void) +{ + int i; + bool ok; + int nerrors = 0; + uint8_t buf[BUFSIZE]; + int not_dev_addr = 0x35; // no device with this address on the i2c bus. + int offset; + int len; + + u2_init(); + + puts("test_i2c\n"); + + // try writing a non-existent device + buf[0] = 0xA5; + ok = i2c_write(not_dev_addr, buf, 1); + ASSERT_FALSE(ok); + + // try read from non-existent device + buf[0] = 0; + ok = i2c_read(not_dev_addr, buf, 1); + ASSERT_FALSE(ok); + + // try writing eeprom + offset = 31; + len = 8; + memset(buf, 0, sizeof(buf)); + for (i = 0; i < len; i++) + buf[i] = i; + ok = eeprom_write(I2C_ADDR_MBOARD, offset, buf, len); + ASSERT_TRUE(ok); + + // now try to read it back + offset = 31; + len = 8; + memset(buf, 0, sizeof(buf)); + ok = eeprom_read(I2C_ADDR_MBOARD, offset, buf, len); + ASSERT_TRUE(ok); + + // check result + for (i = 0; i < len; i++){ + if (buf[i] != i){ + printf("buf[%d] = %d, should be %d\n", i, buf[i], i); + nerrors++; + } + } + + if (nerrors == 0){ + output_regs->leds = 0x3; + puts("PASSED\n"); + } + else { + output_regs->leds = 0x0; + puts("FAILED\n"); + } + + hal_finish(); + return 0; +} + diff --git a/firmware/microblaze/apps/test_lsadc.c b/firmware/microblaze/apps/test_lsadc.c new file mode 100644 index 000000000..5fda29cd7 --- /dev/null +++ b/firmware/microblaze/apps/test_lsadc.c @@ -0,0 +1,57 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <lsadc.h> +#include <lsdac.h> +#include <u2_init.h> +#include <nonstdio.h> +#include <hal_io.h> + +int +main(void) +{ + u2_init(); + + puts("\ntest_lsadc"); + + uint32_t r; + + unsigned int up_counter = 0; + + while (1){ + unsigned int v; + v = up_counter; + + lsdac_write_rx(0, v << 0); + lsdac_write_rx(2, v << 1); + +#if 1 + r = lsadc_read_rx(0); + lsdac_write_rx(1, r & 0x0fff); + //puthex32_nl(r); +#endif + +#if 1 + r = lsadc_read_rx(1); + lsdac_write_rx(3, r & 0x0fff); + //puthex32_nl(r); +#endif + + up_counter++; + } +} diff --git a/firmware/microblaze/apps/test_lsdac.c b/firmware/microblaze/apps/test_lsdac.c new file mode 100644 index 000000000..8c1bf333b --- /dev/null +++ b/firmware/microblaze/apps/test_lsdac.c @@ -0,0 +1,51 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <lsdac.h> +#include <u2_init.h> +#include <nonstdio.h> +#include <hal_io.h> + +int +main(void) +{ + u2_init(); + + puts("\ntest_lsdac"); + + unsigned int up_counter = 0; + unsigned int dn_counter = 0; + + while(1){ + unsigned int v; + v = up_counter; + lsdac_write_rx(0, v << 0); + lsdac_write_rx(1, v << 1); + lsdac_write_rx(2, v << 2); + lsdac_write_rx(3, v << 3); + + v = up_counter; + lsdac_write_tx(0, v << 0); + lsdac_write_tx(1, v << 1); + lsdac_write_tx(2, v << 2); + lsdac_write_tx(3, v << 3); + + up_counter++; + dn_counter--; + } +} diff --git a/firmware/microblaze/apps/test_phy_comm.c b/firmware/microblaze/apps/test_phy_comm.c new file mode 100644 index 000000000..d312ca4cc --- /dev/null +++ b/firmware/microblaze/apps/test_phy_comm.c @@ -0,0 +1,113 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +// check communication with ethernet PHY chip + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "ethernet.h" +#include "pic.h" +#include "nonstdio.h" + + +#define DELTA_T 12500000 // .125s (10ns per tick) +//#define DELTA_T 10000 + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + + + +#define U2_ETHERTYPE 0xBEEF + + +static volatile int led_link_up_flag = 0; + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + led_link_up_flag = 0x2; + break; + + case 100: + v = LS_100; + led_link_up_flag = 0x2; + break; + + case 1000: + v = LS_100; + led_link_up_flag = 0x2; + break; + + default: + v = 0; + led_link_up_flag = 0; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + putstr("\neth link changed: speed = "); + puthex_nl(speed); +} + +void +timer_handler(unsigned irq) +{ + static int led_counter = 0; + + hal_set_timeout(DELTA_T); // schedule next timeout + output_regs->leds = (led_counter++ & 0x1) | led_link_up_flag; +} + +int +main(void) +{ + u2_init(); + + putstr("\n test_phy_comm\n"); + + pic_register_handler(IRQ_ONETIME, timer_handler); + hal_set_timeout(DELTA_T); // schedule timeout + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + ethernet_register_link_changed_callback(link_changed_callback); + + output_regs->phy_ctrl = 1; /* reset the eth PHY */ + output_regs->phy_ctrl = 0; + + ethernet_init(); + + while(1) + ; + + return 0; +} diff --git a/firmware/microblaze/apps/test_ram.c b/firmware/microblaze/apps/test_ram.c new file mode 100644 index 000000000..77ee693f6 --- /dev/null +++ b/firmware/microblaze/apps/test_ram.c @@ -0,0 +1,105 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <stdio.h> +#include <stdint.h> +#include <u2_init.h> /* FIXME */ +#include <sd.h> +#include <string.h> +#include <hal_io.h> +#include <nonstdio.h> +#include <hal_uart.h> + +#define ASSERT_TRUE(x) \ + do { \ + if (!(x)){ \ + printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + +#define ASSERT_FALSE(x) \ + do { \ + if (x){ \ + printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + + +#define BUFSIZE 128 + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int +main(void) +{ + + u2_init(); + puts("\ntest_ram\n"); + int success = test_ram(); + if(success) + puts("RAM Passed Tests\n"); + else + puts("RAM Failed\n"); + + hal_finish(); + return 0; +} + diff --git a/firmware/microblaze/apps/test_sd.c b/firmware/microblaze/apps/test_sd.c new file mode 100644 index 000000000..494432d7f --- /dev/null +++ b/firmware/microblaze/apps/test_sd.c @@ -0,0 +1,81 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <stdio.h> +#include <stdint.h> +#include <u2_init.h> /* FIXME */ +#include <sd.h> +#include <string.h> +#include <hal_io.h> +#include <nonstdio.h> + + +#define ASSERT_TRUE(x) \ + do { \ + if (!(x)){ \ + printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + +#define ASSERT_FALSE(x) \ + do { \ + if (x){ \ + printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + + +#define BUFSIZE 128 + +int +main(void) +{ + int i; + unsigned char buf[512]; + + u2_init(); + + puts("\ntest_sd\n"); + + + i = sd_init(); + if(i) + puts("Successfully Init'ed Card\n"); + else + puts("FAILED INIT of Card\n"); + + i = sd_read_block(2048,buf); + if(i) { + puts("READ Command accepted\n"); + for(i=0;i<512;i++) + if((i&15) == 15) + puthex8_nl(buf[i]); + else { + puthex8(buf[i]); + putchar(' '); + } + } + else + puts("READ Command Rejected\n"); + + puts("Done"); + hal_finish(); + return 0; +} + diff --git a/firmware/microblaze/apps/timer_test.c b/firmware/microblaze/apps/timer_test.c new file mode 100644 index 000000000..44e80b5f1 --- /dev/null +++ b/firmware/microblaze/apps/timer_test.c @@ -0,0 +1,57 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include "nonstdio.h" +#include "hal_io.h" + +#define DELTA_T 500 // 5 us (10ns per tick) + + +void +timer_handler(unsigned irq) +{ + hal_set_timeout(DELTA_T); + + putstr("Tick: "); + puthex_nl(0); +} + +int +main(void) +{ + u2_init(); + + // setup timer + + putstr("Setting up timer\n"); + pic_register_handler(IRQ_ONETIME, timer_handler); + + hal_set_timeout(DELTA_T); + + while (1) + ; + + putstr("Done Testing\n"); + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/tx_standalone.c b/firmware/microblaze/apps/tx_standalone.c new file mode 100644 index 000000000..1645fa8ba --- /dev/null +++ b/firmware/microblaze/apps/tx_standalone.c @@ -0,0 +1,339 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include "dbsm.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> + +#define _AL4 __attribute__((aligned (4))) + +#define USE_BUFFER_INTERRUPT 0 // 0 or 1 + + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + + +/* + * ================================================================ + * configure DSP RX double buffering state machine + * ================================================================ + */ + + +// 4 lines of ethernet hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE 5 +#define DSP_RX_SAMPLES_PER_FRAME 128 +#define DSP_RX_EXTRA_LINES 1 // writes timestamp + +// Receive from DSP Rx +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ethernet +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from last_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + +/* + * ================================================================ + * configure DSP TX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE 4 +#define DSP_TX_SAMPLES_PER_FRAME 250 // not used except w/ debugging +#define DSP_TX_EXTRA_LINES 2 // reads word0 + timestamp + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past ethernet header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * send constant buffer to DSP TX + */ +static inline void +SEND_CONST_TO_DSP_TX(void) +{ + bp_send_from_buf(DSP_TX_BUF_0, PORT_DSP, 1, + DSP_TX_FIRST_LINE, + DSP_TX_FIRST_LINE + DSP_TX_EXTRA_LINES + DSP_TX_SAMPLES_PER_FRAME - 1); +} + +// ---------------------------------------------------------------- + + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +void link_changed_callback(int speed); +static volatile bool link_is_up = false; // eth handler sets this + + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout +} + +// Tx DSP underrun +void +underrun_irq_handler(unsigned irq) +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + dbsm_stop(&dsp_tx_sm); + + // FIXME anything else? + + putstr("\nirq: underrun\n"); +} + +// Rx DSP overrun +void +overrun_irq_handler(unsigned irq) +{ + dsp_rx_regs->clear_state = 1; + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); + dbsm_stop(&dsp_rx_sm); + + // FIXME anything else? + + putstr("\nirq: overrun\n"); +} + +static void +start_tx_transfers(void) +{ + bp_clear_buf(DSP_TX_BUF_0); // FIXME, really goes in state machine + bp_clear_buf(DSP_TX_BUF_1); + + // fill everything with a constant 32k + 0j + + uint32_t const_sample = (32000 << 16) | 0; + int i; + for (i = 0; i < BP_NLINES; i++){ + buffer_ram(DSP_TX_BUF_0)[i] = const_sample; + buffer_ram(DSP_TX_BUF_1)[i] = const_sample; + } + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + //pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, + U2P_TX_IMMEDIATE | U2P_TX_START_OF_BURST, 0); + u2p_set_timestamp(&pkt.fixed, T_NOW); + + memcpy_wa(buffer_ram(DSP_TX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_TX_BUF_1), &pkt, sizeof(pkt)); + + + int tx_scale = 256; + + // setup Tx DSP regs + dsp_tx_regs->clear_state = 1; // reset + dsp_tx_regs->freq = 408021893; // 9.5 MHz [2**32 * fc/fsample] + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = 32; + + // kick off the state machine + // dbsm_start(&dsp_rx_sm); + + SEND_CONST_TO_DSP_TX(); // send constant buffer to DSP TX +} + + +void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (0){ + putstr("irq: "); + puthex32(status); + putchar('\n'); + } + + if (status & BPS_ERROR_ALL){ + // FIXME rare path, handle error conditions + } + + if (status & BPS_DONE(DSP_TX_BUF_0)){ + bp_clear_buf(DSP_TX_BUF_0); + SEND_CONST_TO_DSP_TX(); + hal_toggle_leds(0x1); + } + +} + +int +main(void) +{ + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ntx_only\n"); + + // Control LEDs + hal_set_leds(0x0, 0x3); + + if (USE_BUFFER_INTERRUPT) + pic_register_handler(IRQ_BUFFER, buffer_irq_handler); + + pic_register_handler(IRQ_OVERRUN, overrun_irq_handler); + pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); + + //pic_register_handler(IRQ_TIMER, timer_irq_handler); + //hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + // initialize double buffering state machine for DSP RX -> Ethernet + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + + // setup receive from ETH + // bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); + +#if 0 + if (hwconfig_simulation_p()){ + // If we're simulating, pretend that we got a start command from the host + eth_mac_addr_t host = {{ 0x00, 0x0A, 0xE4, 0x3E, 0xD2, 0xD5 }}; + start_rx_cmd(&host); + } +#endif + + start_tx_transfers(); // send constant buffers to DSP TX + + while(1){ + if (!USE_BUFFER_INTERRUPT) + buffer_irq_handler(0); + } +} + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + // hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); + + printf("\neth link changed: speed = %d\n", speed); +} diff --git a/firmware/microblaze/apps/txrx.c b/firmware/microblaze/apps/txrx.c new file mode 100644 index 000000000..d0108c1a5 --- /dev/null +++ b/firmware/microblaze/apps/txrx.c @@ -0,0 +1,414 @@ +// +// Copyright 2010 Ettus Research LLC +// +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include <stdbool.h> +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "usrp2_ipv4_packet.h" +#include "usrp2_udp_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include <stddef.h> +#include <stdlib.h> +#include <string.h> +#include "clocks.h" +#include <vrt/bits.h> + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between ethernet and DSP pipelines + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + +/* + * ================================================================ + * configure DSP TX double buffering state machine (eth -> dsp) + * ================================================================ + */ + +// DSP Tx reads ethernet header words +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_ip_udp_t))/4) + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ================================================================ + * configure DSP RX double buffering state machine (dsp -> eth) + * ================================================================ + */ + +// DSP Rx writes ethernet header words +#define DSP_RX_FIRST_LINE 1 //1 = control stuff to udp sm + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + +#define TIME_NOW ((uint32_t)(~0)) + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static uint32_t time_secs = TIME_NOW; +static uint32_t time_ticks = TIME_NOW; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 2 + +bool is_streaming(void){ return streaming_p; } + + +// ---------------------------------------------------------------- + +#define VRT_HEADER_WORDS 5 +#define VRT_TRAILER_WORDS 1 + +void +restart_streaming(void) +{ + // setup RX DSP regs + sr_rx_ctrl->nsamples_per_pkt = streaming_items_per_frame; + sr_rx_ctrl->nchannels = 1; + sr_rx_ctrl->clear_overrun = 1; // reset + sr_rx_ctrl->vrt_header = (0 + | VRTH_PT_IF_DATA_WITH_SID + | VRTH_HAS_TRAILER + | VRTH_TSI_OTHER + | VRTH_TSF_SAMPLE_CNT + | (VRT_HEADER_WORDS+streaming_items_per_frame+VRT_TRAILER_WORDS)); + sr_rx_ctrl->vrt_stream_id = 0; + sr_rx_ctrl->vrt_trailer = 0; + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + sr_rx_ctrl->cmd = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + (time_ticks==TIME_NOW)?1:0, 1); // conditionally set "now" bit, set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + sr_rx_ctrl->time_secs = time_secs; + sr_rx_ctrl->time_ticks = time_ticks; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + sr_rx_ctrl->cmd = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, 1, 1); + + sr_rx_ctrl->time_secs = 0; + sr_rx_ctrl->time_ticks = 0; // enqueue second command +} + +/* + * 1's complement sum for IP and UDP headers + * + * init chksum to zero to start. + */ +static unsigned int +CHKSUM(unsigned int x, unsigned int *chksum) +{ + *chksum += x; + *chksum = (*chksum & 0xffff) + (*chksum>>16); + *chksum = (*chksum & 0xffff) + (*chksum>>16); + return x; +} + +void +start_rx_streaming_cmd(op_start_rx_streaming_t *p) +{ + /* + * Construct ethernet header and preload into two buffers + */ + struct { + uint32_t ctrl_word; + } mem _AL4; + + memset(&mem, 0, sizeof(mem)); + p->items_per_frame = (1500 - sizeof(u2_eth_ip_udp_t))/sizeof(uint32_t) - (VRT_HEADER_WORDS + VRT_TRAILER_WORDS); //FIXME + mem.ctrl_word = (VRT_HEADER_WORDS+p->items_per_frame+VRT_TRAILER_WORDS)*sizeof(uint32_t) | 1 << 16; + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &mem, sizeof(mem)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &mem, sizeof(mem)); + + //setup ethernet header machine + sr_udp_sm->eth_hdr.mac_dst_0_1 = (host_dst_mac_addr.addr[0] << 8) | host_dst_mac_addr.addr[1]; + sr_udp_sm->eth_hdr.mac_dst_2_3 = (host_dst_mac_addr.addr[2] << 8) | host_dst_mac_addr.addr[3]; + sr_udp_sm->eth_hdr.mac_dst_4_5 = (host_dst_mac_addr.addr[4] << 8) | host_dst_mac_addr.addr[5]; + sr_udp_sm->eth_hdr.mac_src_0_1 = (host_src_mac_addr.addr[0] << 8) | host_src_mac_addr.addr[1]; + sr_udp_sm->eth_hdr.mac_src_2_3 = (host_src_mac_addr.addr[2] << 8) | host_src_mac_addr.addr[3]; + sr_udp_sm->eth_hdr.mac_src_4_5 = (host_src_mac_addr.addr[4] << 8) | host_src_mac_addr.addr[5]; + sr_udp_sm->eth_hdr.ether_type = ETHERTYPE_IPV4; + + //setup ip header machine + unsigned int chksum = 0; + sr_udp_sm->ip_hdr.ver_ihl_tos = CHKSUM(0x4500, &chksum); // IPV4, 5 words of header (20 bytes), TOS=0 + sr_udp_sm->ip_hdr.total_length = UDP_SM_INS_IP_LEN; // Don't checksum this line in SW + sr_udp_sm->ip_hdr.identification = CHKSUM(0x0000, &chksum); // ID + sr_udp_sm->ip_hdr.flags_frag_off = CHKSUM(0x4000, &chksum); // don't fragment + sr_udp_sm->ip_hdr.ttl_proto = CHKSUM(0x2011, &chksum); // TTL=32, protocol = UDP (17 decimal) + //sr_udp_sm->ip_hdr.checksum .... filled in below + uint32_t src_ip_addr = host_src_ip_addr.s_addr; + uint32_t dst_ip_addr = host_dst_ip_addr.s_addr; + sr_udp_sm->ip_hdr.src_addr_high = CHKSUM(src_ip_addr >> 16, &chksum); // IP src high + sr_udp_sm->ip_hdr.src_addr_low = CHKSUM(src_ip_addr & 0xffff, &chksum); // IP src low + sr_udp_sm->ip_hdr.dst_addr_high = CHKSUM(dst_ip_addr >> 16, &chksum); // IP dst high + sr_udp_sm->ip_hdr.dst_addr_low = CHKSUM(dst_ip_addr & 0xffff, &chksum); // IP dst low + sr_udp_sm->ip_hdr.checksum = UDP_SM_INS_IP_HDR_CHKSUM | (chksum & 0xffff); + + //setup the udp header machine + sr_udp_sm->udp_hdr.src_port = host_src_udp_port; + sr_udp_sm->udp_hdr.dst_port = host_dst_udp_port; + sr_udp_sm->udp_hdr.length = UDP_SM_INS_UDP_LEN; + sr_udp_sm->udp_hdr.checksum = UDP_SM_LAST_WORD; // zero UDP checksum + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + time_secs = p->time_secs; + time_ticks = p->time_ticks; + restart_streaming(); +} + +void +stop_rx_cmd(void) +{ + if (is_streaming()){ + streaming_p = false; + + // no samples, "now", not chained + sr_rx_ctrl->cmd = MK_RX_CMD(0, 1, 0); + + sr_rx_ctrl->time_secs = 0; + sr_rx_ctrl->time_ticks = 0; // enqueue command + } + +} + + +static void +setup_tx() +{ + sr_tx_ctrl->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + // setup some defaults + + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = interp; +} + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + sr_rx_ctrl->time_secs = 0; + sr_rx_ctrl->time_ticks = 0; + } + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + putstr("\nTxRx-NEWETH\n"); + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + + output_regs->debug_mux_ctrl = 1; +#if 0 + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // program tx registers + setup_tx(); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} + +//-------------------compile time checks-------------------------------- +#define COMPILE_TIME_ASSERT(pred) switch(0){case 0:case pred:;} + +void compile_time_checks(void){ + COMPILE_TIME_ASSERT(sizeof(u2_eth_hdr_t) == 14); + COMPILE_TIME_ASSERT(sizeof(u2_ipv4_hdr_t) == 20); + COMPILE_TIME_ASSERT(sizeof(u2_udp_hdr_t) == 8); +} diff --git a/firmware/microblaze/bootstrap b/firmware/microblaze/bootstrap new file mode 100755 index 000000000..2343025cc --- /dev/null +++ b/firmware/microblaze/bootstrap @@ -0,0 +1,24 @@ +#!/bin/sh +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +rm -rf *.cache + +aclocal +autoconf +libtoolize --automake +automake --add-missing --gnu --warnings=all diff --git a/firmware/microblaze/configure.ac b/firmware/microblaze/configure.ac new file mode 100644 index 000000000..4c96d607e --- /dev/null +++ b/firmware/microblaze/configure.ac @@ -0,0 +1,46 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +################################################## +## Setup Autotools +################################################## +AC_PREREQ(2.60) +AC_INIT +AM_INIT_AUTOMAKE(uhd-mb, 0) + +################################################## +## Setup Compiler +################################################## +dnl Fix 2.64 cross compile detection for AVR and RTEMS +dnl by not trying to compile fopen. +m4_if(m4_defn([m4_PACKAGE_VERSION]), [2.64], + [m4_foreach([_GCC_LANG], [C, C++, Fortran, Fortran 77], + [m4_define([_AC_LANG_IO_PROGRAM(]_GCC_LANG[)], m4_defn([AC_LANG_PROGRAM(]_GCC_LANG[)]))])]) + +AC_PROG_CC([mb-gcc]) +LT_INIT + +################################################## +## Create Files +################################################## +AC_CONFIG_FILES([ \ + Makefile \ + apps/Makefile \ + include/Makefile \ + lib/Makefile \ +]) +AC_OUTPUT diff --git a/firmware/microblaze/divisors.py b/firmware/microblaze/divisors.py new file mode 100755 index 000000000..d31bd4dad --- /dev/null +++ b/firmware/microblaze/divisors.py @@ -0,0 +1,34 @@ +#!/usr/bin/env python + +speeds = (9600, 19200, 38400, 57600, 115200, 230400) + +master_clk = 100e6 +wb_clk = master_clk / 2 + +def divisor(speed): + div0 = wb_clk // (speed * 16) + div1 = div0 + 1 + actual0 = actual_speed(div0) + actual1 = actual_speed(div1) + if abs(actual0 - speed) < abs(actual1 - speed): + return div0 + else: + return div1 + +def actual_speed(divisor): + return (wb_clk // divisor) / 16 + +def doit(speed): + div = divisor(speed) + actual = actual_speed(div) + rel_error = (actual - speed) / speed + print "target: %6d divisor: %6d actual: %11.4f %6.3f%%" % (speed, div, actual, rel_error*100) + +def main(): + print "wb_clk = %f" % (wb_clk,) + for s in speeds: + doit(s) + +if __name__ == '__main__': + main() + diff --git a/firmware/microblaze/include/.gitignore b/firmware/microblaze/include/.gitignore new file mode 100644 index 000000000..b336cc7ce --- /dev/null +++ b/firmware/microblaze/include/.gitignore @@ -0,0 +1,2 @@ +/Makefile +/Makefile.in diff --git a/firmware/microblaze/include/Makefile.am b/firmware/microblaze/include/Makefile.am new file mode 100644 index 000000000..1e4eadfe6 --- /dev/null +++ b/firmware/microblaze/include/Makefile.am @@ -0,0 +1,31 @@ +# +# Copyright 2008, 2010 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(top_srcdir)/Makefile.common + +noinst_HEADERS = \ + usrp2_cdefs.h \ + usrp2_eth_packet.h \ + usrp2_ipv4_packet.h \ + usrp2_udp_packet.h \ + usrp2_fpga_regs.h \ + usrp2_i2c_addr.h \ + usrp2_clock_bits.h \ + usrp2_types.h \ + network.h \ + vrt/bits.h \ + vrt/types.h diff --git a/firmware/microblaze/include/network.h b/firmware/microblaze/include/network.h new file mode 100644 index 000000000..4c6c43585 --- /dev/null +++ b/firmware/microblaze/include/network.h @@ -0,0 +1,82 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/*! + * Various networking related structures and defines + */ + +#ifndef INCLUDED_NETWORK_H +#define INCLUDED_NETWORK_H + +#include <stdint.h> +#include <stdbool.h> + +// Ethernet MAC address + +typedef struct { + uint8_t addr[6]; +} eth_mac_addr_t; + + +// IPv4 address + +#ifndef __cplusplus + +struct in_addr { + uint32_t s_addr; +}; + +static inline struct in_addr +make_in_addr(uint32_t addr) +{ + struct in_addr r; + r.s_addr = addr; + return r; +} + +static inline bool +in_addr_eq(const struct in_addr a, const struct in_addr b) +{ + return a.s_addr == b.s_addr; +} + +#define MK_IP_ADDR(a, b, c, d) \ + (((a) << 24) | ((b) << 16) | ((c) << 8) | (d)) + + +// IPv4 AF_INET sockets: + +struct sockaddr_in { + short sin_family; // e.g. AF_INET, AF_INET6 + unsigned short sin_port; // e.g. htons(3490) + struct in_addr sin_addr; +}; + +static inline struct sockaddr_in +make_sockaddr_in(struct in_addr addr, int port) +{ + struct sockaddr_in r; + r.sin_family = 0; // not used + r.sin_port = port; + r.sin_addr = addr; + return r; +} + +#endif + +#endif /* INCLUDED_NETWORK_H */ diff --git a/firmware/microblaze/include/usrp2_cdefs.h b/firmware/microblaze/include/usrp2_cdefs.h new file mode 100644 index 000000000..71395cda8 --- /dev/null +++ b/firmware/microblaze/include/usrp2_cdefs.h @@ -0,0 +1,34 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef INCLUDED_USRP2_CDEFS_H +#define INCLUDED_USRP2_CDEFS_H + +/* C++ needs to know that types and declarations are C, not C++. */ +#ifdef __cplusplus +# define __U2_BEGIN_DECLS extern "C" { +# define __U2_END_DECLS } +#else +# define __U2_BEGIN_DECLS +# define __U2_END_DECLS +#endif + +#endif /* INCLUDED_USRP2_CDEFS_H */ diff --git a/firmware/microblaze/include/usrp2_clock_bits.h b/firmware/microblaze/include/usrp2_clock_bits.h new file mode 100644 index 000000000..d2052e941 --- /dev/null +++ b/firmware/microblaze/include/usrp2_clock_bits.h @@ -0,0 +1,55 @@ +// +// Copyright 2010 Ettus Research LLC +// +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef INCLUDED_USRP2_CLOCK_BITS_H +#define INCLUDED_USRP2_CLOCK_BITS_H + +#define _MC_WE_LOCK 0x0001 +#define _MC_MIMO_CLK_INPUT 0x0002 // else SMA input + +/* + * Derived masks (use these): + * + * We get our input from 1 of three places: + * Our free running oscilator, our SMA connector, or from the MIMO connector + */ +#define MC_WE_DONT_LOCK 0x0000 +#define MC_WE_LOCK_TO_SMA (_MC_WE_LOCK | 0) +#define MC_WE_LOCK_TO_MIMO (_MC_WE_LOCK | _MC_MIMO_CLK_INPUT) + +/* + * Independent of the source of the clock, we may or may not drive our + * clock onto the mimo connector. Note that there are dedicated clock + * signals in each direction, so disaster doesn't occurs if we're + * unnecessarily providing clock. + */ +#define MC_PROVIDE_CLK_TO_MIMO 0x0004 + +#define MC_REF_CLK_MASK 0x0f + +#define MC_PPS_SOURCE_SMA (0x00 << 4) +#define MC_PPS_SOURCE_MIMO (0x01 << 4) + +#define MC_PPS_POLARITY_NEG (0x00 << 5) +#define MC_PPS_POLARITY_POS (0x01 << 5) + +#endif /* INCLUDED_USRP2_CLOCK_BITS_H */ diff --git a/firmware/microblaze/include/usrp2_eth_packet.h b/firmware/microblaze/include/usrp2_eth_packet.h new file mode 100644 index 000000000..7d5b84f00 --- /dev/null +++ b/firmware/microblaze/include/usrp2_eth_packet.h @@ -0,0 +1,405 @@ +// +// Copyright 2010 Ettus Research LLC +// +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_USRP2_ETH_PACKET_H +#define INCLUDED_USRP2_ETH_PACKET_H + +#include "usrp2_cdefs.h" +#include "network.h" + +__U2_BEGIN_DECLS + +#define U2_DATA_ETHERTYPE 0xBEEF // used in our data frames +#define U2_CTRL_ETHERTYPE 0xBEF0 // used in our control frames +#define MAC_CTRL_ETHERTYPE 0x8808 // used in PAUSE frames +#define ETHERTYPE_IPV4 0x0800 // used in ip packets + +/* + * All these data structures are BIG-ENDIAN on the wire + */ + +// FIXME gcc specific. Really ought to come from compiler.h +#define _AL4 __attribute__((aligned (4))) + +/*! + * \brief The classic 14-byte ethernet header + */ +typedef struct { + eth_mac_addr_t dst; + eth_mac_addr_t src; + uint16_t ethertype; +} __attribute__((packed)) u2_eth_hdr_t; + +/*! + * \brief consolidated packet: ethernet header + */ +typedef struct { + u2_eth_hdr_t ehdr; +} u2_eth_packet_t; + +/*! + * \brief consolidated packet: padding + ethernet header + */ +typedef struct { + uint16_t padding; + u2_eth_hdr_t ehdr; +} u2_eth_packet_pad_before_t; + +/* + * Opcodes for control channel + * + * Reply opcodes are the same as the request opcode with the OP_REPLY_BIT set (0x80). + */ +#define OP_REPLY_BIT 0x80 + +#define OP_EOP 0 // marks last subpacket in packet + +#define OP_ID 1 +#define OP_ID_REPLY (OP_ID | OP_REPLY_BIT) +#define OP_BURN_MAC_ADDR 2 +#define OP_BURN_MAC_ADDR_REPLY (OP_BURN_MAC_ADDR | OP_REPLY_BIT) +#define OP_CONFIG_RX_V2 4 +#define OP_CONFIG_RX_REPLY_V2 (OP_CONFIG_RX_V2 | OP_REPLY_BIT) +#define OP_CONFIG_TX_V2 5 +#define OP_CONFIG_TX_REPLY_V2 (OP_CONFIG_TX_V2 | OP_REPLY_BIT) +#define OP_START_RX_STREAMING 6 +#define OP_START_RX_STREAMING_REPLY (OP_START_RX_STREAMING | OP_REPLY_BIT) +#define OP_STOP_RX 7 +#define OP_STOP_RX_REPLY (OP_STOP_RX | OP_REPLY_BIT) +#define OP_CONFIG_CLOCK 8 +#define OP_CONFIG_CLOCK_REPLY (OP_CONFIG_CLOCK | OP_REPLY_BIT) +#define OP_DBOARD_INFO 9 +#define OP_DBOARD_INFO_REPLY (OP_DBOARD_INFO | OP_REPLY_BIT) +#define OP_PEEK 11 +#define OP_PEEK_REPLY (OP_PEEK | OP_REPLY_BIT) +#define OP_POKE 12 +#define OP_POKE_REPLY (OP_POKE | OP_REPLY_BIT) +#define OP_SET_TX_LO_OFFSET 13 +#define OP_SET_TX_LO_OFFSET_REPLY (OP_SET_TX_LO_OFFSET | OP_REPLY_BIT) +#define OP_SET_RX_LO_OFFSET 14 +#define OP_SET_RX_LO_OFFSET_REPLY (OP_SET_RX_LO_OFFSET | OP_REPLY_BIT) +#define OP_RESET_DB 15 +#define OP_RESET_DB_REPLY (OP_RESET_DB | OP_REPLY_BIT) +#define OP_GPIO_SET_DDR 17 +#define OP_GPIO_SET_DDR_REPLY (OP_GPIO_SET_DDR | OP_REPLY_BIT) +#define OP_GPIO_SET_SELS 18 +#define OP_GPIO_SET_SELS_REPLY (OP_GPIO_SET_SELS | OP_REPLY_BIT) +#define OP_GPIO_READ 19 +#define OP_GPIO_READ_REPLY (OP_GPIO_READ | OP_REPLY_BIT) +#define OP_GPIO_WRITE 20 +#define OP_GPIO_WRITE_REPLY (OP_GPIO_WRITE | OP_REPLY_BIT) +#define OP_GPIO_STREAM 21 +#define OP_GPIO_STREAM_REPLY (OP_GPIO_STREAM | OP_REPLY_BIT) +#define OP_SET_TIME 22 +#define OP_SET_TIME_REPLY (OP_SET_TIME | OP_REPLY_BIT) + +/* + * All subpackets are a multiple of 4 bytes long. + * All subpackets start with an 8-bit opcode, an 8-bit len and an 8-bit rid. + */ +#define MAX_SUBPKT_LEN 252 + +/*! + * \brief Generic request and reply packet + * + * Used by: + * OP_EOP, OP_BURN_MAC_ADDR_REPLY, OP_START_RX_STREAMING_REPLY, + * OP_STOP_RX_REPLY, OP_DBOARD_INFO, OP_SYNC_TO_PPS + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t ok; // bool +} _AL4 op_generic_t; + +/*! + * \brief Set the ticks and secs on a usrp2 + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t type; + uint32_t time_secs; + uint32_t time_ticks; +} _AL4 op_set_time_t; + +typedef enum { + OP_SET_TIME_TYPE_NOW, + OP_SET_TIME_TYPE_PPS +} op_set_time_type_t; + +/*! + * \brief Reply info from a USRP2 + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + eth_mac_addr_t addr; + uint16_t hw_rev; + uint8_t fpga_md5sum[16]; + uint8_t sw_md5sum[16]; +} _AL4 op_id_reply_t; + +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + uint32_t items_per_frame; // # of 32-bit data items; MTU=1500: [9,371] + uint32_t time_secs; + uint32_t time_ticks; +} _AL4 op_start_rx_streaming_t; + +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + eth_mac_addr_t addr; +} _AL4 op_burn_mac_addr_t; + +/*! + * \brief Configure receiver + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + // bitmask indicating which of the following fields are valid + uint16_t valid; + uint16_t gain; // fxpt_db (Q9.7) + uint32_t freq_hi; // high 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t freq_lo; // low 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t decim; // desired decimation factor (NOT -1) + uint32_t scale_iq; // (scale_i << 16) | scale_q [16.0 format] +} _AL4 op_config_rx_v2_t; + +// bitmask for "valid" field. If the bit is set, there's +// meaningful data in the corresonding field. + +#define CFGV_GAIN 0x0001 // gain field is valid +#define CFGV_FREQ 0x0002 // target_freq field is valid +#define CFGV_INTERP_DECIM 0x0004 // interp or decim is valid +#define CFGV_SCALE_IQ 0x0008 // scale_iq is valid + +/*! + * \brief Reply to receiver configuration + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + + uint16_t ok; // config was successful (bool) + uint16_t inverted; // spectrum is inverted (bool) + + // RF frequency that corresponds to DC in the IF (fxpt_freq) + uint32_t baseband_freq_hi; + uint32_t baseband_freq_lo; + // DDC frequency (fxpt_freq) + uint32_t ddc_freq_hi; + uint32_t ddc_freq_lo; + // residual frequency (fxpt_freq) + uint32_t residual_freq_hi; + uint32_t residual_freq_lo; + +} _AL4 op_config_rx_reply_v2_t; + +/*! + * \brief Configure transmitter + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + + // bitmask indicating which of the following fields are valid + uint16_t valid; + uint16_t gain; // fxpt_db (Q9.7) + uint32_t freq_hi; // high 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t freq_lo; // low 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t interp; // desired interpolation factor (NOT -1) + uint32_t scale_iq; // (scale_i << 16) | scale_q [16.0 format] +} _AL4 op_config_tx_v2_t; + +/*! + * \brief Reply to configure transmitter + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + + uint16_t ok; // config was successful (bool) + uint16_t inverted; // spectrum is inverted (bool) + + // RF frequency that corresponds to DC in the IF (fxpt_freq) + uint32_t baseband_freq_hi; + uint32_t baseband_freq_lo; + // DUC frequency (fxpt_freq) + uint32_t duc_freq_hi; + uint32_t duc_freq_lo; + // residual frequency (fxpt_freq) + uint32_t residual_freq_hi; + uint32_t residual_freq_lo; + +} _AL4 op_config_tx_reply_v2_t; + +/*! + * \brief Configure clocking, etc (uses generic reply) + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t flags; +} op_config_clock_t; + +/*! + * \brief High-level information about daughterboards + */ +typedef struct { + int32_t dbid; //< d'board ID (-1 none, -2 invalid eeprom) + uint32_t freq_min_hi; //< high 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t freq_min_lo; //< low 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t freq_max_hi; //< high 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t freq_max_lo; //< low 32-bits of 64-bit fxpt_freq (Q44.20) + uint16_t gain_min; //< min gain that can be set. fxpt_db (Q9.7) + uint16_t gain_max; //< max gain that can be set. fxpt_db (Q9.7) + uint16_t gain_step_size; //< fxpt_db (Q9.7) +} u2_db_info_t; + + +/*! + * \brief Reply to d'board info request + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t ok; // request was successful (bool) + + u2_db_info_t tx_db_info; + u2_db_info_t rx_db_info; +} _AL4 op_dboard_info_reply_t; + +/*! + * \brief Read from Wishbone memory + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + uint32_t addr; + uint32_t bytes; +} _AL4 op_peek_t; + +/*! + * \brief Write to Wishbone memory + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + uint32_t addr; + // Words follow here +} _AL4 op_poke_t; + +/* + * Common structure for commands with a single frequency param + * (e.g., set_*_lo_offset, set_*_bw) + */ +typedef struct { + uint8_t opcode; + uint8_t len; + uint8_t rid; + uint8_t mbz; + uint32_t freq_hi; //< high 32-bits of 64-bit fxpt_freq (Q44.20) + uint32_t freq_lo; //< low 32-bits of 64-bit fxpt_freq (Q44.20) +} _AL4 op_freq_t; + +/* + * Structures for commands in GPIO system + */ +typedef struct { + uint8_t opcode; // OP_GPIO_SET_DDR, OP_GPIO_WRITE, OP_GPIO_STREAM + uint8_t len; + uint8_t rid; + uint8_t bank; + uint16_t value; + uint16_t mask; +} _AL4 op_gpio_t; + +typedef struct { + uint8_t opcode; // OP_GPIO_SET_SELS + uint8_t len; + uint8_t rid; + uint8_t bank; + uint8_t sels[16]; +} _AL4 op_gpio_set_sels_t; + +typedef struct { + uint8_t opcode; // OP_GPIO_READ_REPLY + uint8_t len; + uint8_t rid; + uint8_t ok; + uint16_t mbz; + uint16_t value; +} _AL4 op_gpio_read_reply_t; + +/* + * ================================================================ + * union of all of subpacket types + * ================================================================ + */ +typedef union { + + op_generic_t op_generic; + op_id_reply_t op_id_reply; + op_start_rx_streaming_t op_start_rx_streaming; + op_burn_mac_addr_t op_burn_mac_addr; + op_config_rx_v2_t op_config_rx_v2; + op_config_rx_reply_v2_t op_config_rx_reply_v2; + op_config_tx_v2_t op_config_tx_v2; + op_config_tx_reply_v2_t op_config_tx_reply_v2; + op_config_clock_t op_config_clock; + op_peek_t op_peek; + op_poke_t op_poke; + op_freq_t op_freq; + op_gpio_t op_gpio; + op_gpio_set_sels_t op_gpio_set_sels; + op_gpio_read_reply_t op_gpio_read_reply; + op_set_time_t op_set_time; + +} u2_subpkt_t; + + +__U2_END_DECLS + +#endif /* INCLUDED_USRP2_ETH_PACKET_H */ diff --git a/firmware/microblaze/include/usrp2_fpga_regs.h b/firmware/microblaze/include/usrp2_fpga_regs.h new file mode 100644 index 000000000..b0f83df60 --- /dev/null +++ b/firmware/microblaze/include/usrp2_fpga_regs.h @@ -0,0 +1,80 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_USRP2_FPGA_REGS_H +#define INCLUDED_USSRP2_FPGA_REGS_H + +#include "usrp2_cdefs.h" + +__U2_BEGIN_DECLS + +// ---------------------------------------------------------------- + +#define DSP_CORE_TX_BASE 128 + +// DUC center frequency tuning word (phase increment) +#define FR_TX_FREQ_0 (0 + DSP_CORE_TX_BASE) + +// I & Q output scaling, 16.0 format ((I_SCALE << 16) | Q_SCALE) +#define FR_TX_SCALE_0 (1 + DSP_CORE_TX_BASE) + +// Tx interpolation rate (set to 1 less than desired rate) +#define FR_TX_INTERP_RATE_0 (2 + DSP_CORE_TX_BASE) + +// Write 1 (actually anything) to clear tx state +#define FR_TX_CLEAR_STATE_0 (3 + DSP_CORE_TX_BASE) + +// ---------------------------------------------------------------- + +#define DSP_CORE_RX_BASE 160 + +// DDC center frequency tuning word (phase increment) +#define FR_RX_FREQ_0 (0 + DSP_CORE_RX_BASE) + +// I & Q input scaling, 16.0 format ((I_SCALE << 16) | Q_SCALE) +#define FR_RX_SCALE_0 (1 + DSP_CORE_RX_BASE) + +// Rx decimation rate (set to 1 less than desired rate) +#define FR_RX_DECIM_RATE_0 (2 + DSP_CORE_RX_BASE) + +// The next two registers concatenated are the Rx command register. +// +// Writing FR_RX_TIME_TO_RX_0 writes the concatenated value into the +// cmd queue. Thus, if you're writing both, be sure to write +// FR_RX_QTY_0 first. +// +// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +// | Timestamp | +// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +#define FR_RX_TIME_TO_RX (3 + DSP_CORE_RX_BASE) + +// 23-bits 9-bits +// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +// | number_of_lines | lines_per_frame | +// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + +#define FR_RX_QTY_0 (4 + DSP_CORE_RX_BASE) + +// write a 1 (anything actually) to clear the overrun +#define FR_RX_CLR_OVERRUN_0 (5 + DSP_CORE_RX_BASE) + + +__U2_END_DECLS + +#endif /* INCLUDED_USRP2_FPGA_REGS_H */ diff --git a/firmware/microblaze/include/usrp2_i2c_addr.h b/firmware/microblaze/include/usrp2_i2c_addr.h new file mode 100644 index 000000000..f25996903 --- /dev/null +++ b/firmware/microblaze/include/usrp2_i2c_addr.h @@ -0,0 +1,82 @@ +/* -*- c++ -*- */ +/* + * Copyright 2004,2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_USRP2_I2C_ADDR_H +#define INCLUDED_USRP2_I2C_ADDR_H + +#include "usrp2_cdefs.h" + +__U2_BEGIN_DECLS + +// I2C addresses + +#define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx + +#define I2C_ADDR_MBOARD (I2C_DEV_EEPROM | 0x0) +#define I2C_ADDR_TX_A (I2C_DEV_EEPROM | 0x4) +#define I2C_ADDR_RX_A (I2C_DEV_EEPROM | 0x5) + + +// format of USRP2 motherboard rom +// 00: 0x00 h/w rev (LSB) +// 01: 0x00 h/w rev (MSB) +// 02: 0x00 MAC addr 0 +// 03: 0x50 MAC addr 1 +// 04: 0xC2 MAC addr 2 +// 05: 0x85 MAC addr 3 +// 06: 0x3. MAC addr 4 +// 07: 0x.. MAC addr 5 + +#define MBOARD_REV_LSB 0x00 +#define MBOARD_REV_MSB 0x01 +#define MBOARD_MAC_ADDR 0x02 + + +// format of daughterboard EEPROM +// 00: 0xDB code for ``I'm a daughterboard'' +// 01: .. Daughterboard ID (LSB) +// 02: .. Daughterboard ID (MSB) +// 03: .. io bits 7-0 direction (bit set if it's an output from m'board) +// 04: .. io bits 15-8 direction (bit set if it's an output from m'board) +// 05: .. ADC0 DC offset correction (LSB) +// 06: .. ADC0 DC offset correction (MSB) +// 07: .. ADC1 DC offset correction (LSB) +// 08: .. ADC1 DC offset correction (MSB) +// ... +// 1f: .. negative of the sum of bytes [0x00, 0x1e] + +#define DB_EEPROM_MAGIC 0x00 +#define DB_EEPROM_MAGIC_VALUE 0xDB +#define DB_EEPROM_ID_LSB 0x01 +#define DB_EEPROM_ID_MSB 0x02 +#define DB_EEPROM_OE_LSB 0x03 +#define DB_EEPROM_OE_MSB 0x04 +#define DB_EEPROM_OFFSET_0_LSB 0x05 // offset correction for ADC or DAC 0 +#define DB_EEPROM_OFFSET_0_MSB 0x06 +#define DB_EEPROM_OFFSET_1_LSB 0x07 // offset correction for ADC or DAC 1 +#define DB_EEPROM_OFFSET_1_MSB 0x08 +#define DB_EEPROM_CHKSUM 0x1f + +#define DB_EEPROM_CLEN 0x20 // length of common portion of eeprom + +#define DB_EEPROM_CUSTOM_BASE DB_EEPROM_CLEN // first avail offset for + // daughterboard specific use +__U2_END_DECLS + +#endif /* INCLUDED_USRP2_I2C_ADDR_H */ + diff --git a/firmware/microblaze/include/usrp2_ipv4_packet.h b/firmware/microblaze/include/usrp2_ipv4_packet.h new file mode 100644 index 000000000..2822dee89 --- /dev/null +++ b/firmware/microblaze/include/usrp2_ipv4_packet.h @@ -0,0 +1,52 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP2_IPV4_PACKET_H +#define INCLUDED_USRP2_IPV4_PACKET_H + +#include "usrp2_cdefs.h" +#include "network.h" + +__U2_BEGIN_DECLS + +/*! + * \brief The classic ipv4 header + */ +typedef struct { + unsigned int ip_v:4; /* both fields are 4 bits */ + unsigned int ip_hl:4; + uint8_t ip_tos; + uint16_t ip_len; + uint16_t ip_id; + uint16_t ip_off; + uint8_t ip_ttl; + uint8_t ip_p; + uint16_t ip_sum; + struct in_addr ip_src; + struct in_addr ip_dst; +} __attribute__((packed)) u2_ipv4_hdr_t; + +#define IP_RF 0x8000 /* reserved fragment flag */ +#define IP_DF 0x4000 /* dont fragment flag */ +#define IP_MF 0x2000 /* more fragments flag */ +#define IP_OFFMASK 0x1fff /* mask for fragmenting bits */ + +#define IP_PROTO_UDP 17 + +__U2_END_DECLS + +#endif /* INCLUDED_USRP2_IPV4_PACKET_H */ diff --git a/firmware/microblaze/include/usrp2_types.h b/firmware/microblaze/include/usrp2_types.h new file mode 100644 index 000000000..dd2bcf1ed --- /dev/null +++ b/firmware/microblaze/include/usrp2_types.h @@ -0,0 +1,112 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_USRP2_TYPES_H +#define INCLUDED_USRP2_TYPES_H + +#include <usrp2_cdefs.h> +#include <stdint.h> + +__U2_BEGIN_DECLS + +/*! + * \brief Fixed point representation of a frequency in Hertz (VITA-49 compatible) + * + * 64-bit two's complement, with the radix point 20 bits up from the bottom. + * Q44.20 format (20 bits to the right of the radix point) + * + * Values range from +/- 8.79 terahertz with a resolution of 0.95 microhertz. + */ +typedef int64_t u2_fxpt_freq_t; + +#define U2_FPF_RP 20 // location of radix point in u2_fxpt_freq_t + +// macro so we can init structs at compile time +#define U2_DOUBLE_TO_FXPT_FREQ(f) (int64_t)((f) * (1LL << U2_FPF_RP)) + +static inline u2_fxpt_freq_t +u2_double_to_fxpt_freq(double f) +{ + return U2_DOUBLE_TO_FXPT_FREQ(f); +} + +static inline int +u2_fxpt_freq_round_to_int(u2_fxpt_freq_t fx) +{ + return (int)((fx+(1<<(U2_FPF_RP-1)))>>U2_FPF_RP); +} + +static inline double +u2_fxpt_freq_to_double(u2_fxpt_freq_t fx) +{ + return ((double) fx) * 1.0/(1 << U2_FPF_RP); +} + +static inline uint32_t +u2_fxpt_freq_hi(u2_fxpt_freq_t f) +{ + return ((f >> 32) & 0xffffffff); +} + +static inline uint32_t +u2_fxpt_freq_lo(u2_fxpt_freq_t f) +{ + return (f & 0xffffffff); +} + +static inline u2_fxpt_freq_t +u2_fxpt_freq_from_hilo(uint32_t hi, uint32_t lo) +{ + return (((u2_fxpt_freq_t) hi) << 32) | lo; +} + +/*! + * \brief Fixed point representation of a gain in dB (VITA-49 compatible) + * + * 16-bit two's complement, with the radix point 7 bits up from the bottom. + * Q9.7 format (7 bits to the right of the radix point) + */ +typedef int16_t u2_fxpt_gain_t; + +#define U2_FPG_RP 7 // location of radix point in u2_fxpt_gain_t + +// macro so we can init structs at compile time +#define U2_DOUBLE_TO_FXPT_GAIN(g) (int16_t)((g) * (1 << U2_FPG_RP)) + +static inline u2_fxpt_gain_t +u2_double_to_fxpt_gain(double g) +{ + return U2_DOUBLE_TO_FXPT_GAIN(g); +} + +static inline float +u2_fxpt_gain_to_double(u2_fxpt_gain_t fx) +{ + return ((double) fx) * 1.0/(1 << U2_FPG_RP); +} + +static inline int +u2_fxpt_gain_round_to_int(u2_fxpt_gain_t fx) +{ + return (int)((fx+(1<<(U2_FPG_RP-1)))>>U2_FPG_RP); +} + + +__U2_END_DECLS + + +#endif /* INCLUDED_USRP2_TYPES_H */ diff --git a/firmware/microblaze/include/usrp2_udp_packet.h b/firmware/microblaze/include/usrp2_udp_packet.h new file mode 100644 index 000000000..4739d4c49 --- /dev/null +++ b/firmware/microblaze/include/usrp2_udp_packet.h @@ -0,0 +1,37 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_USRP2_UDP_PACKET_H +#define INCLUDED_USRP2_UDP_PACKET_H + +#include "usrp2_cdefs.h" + +__U2_BEGIN_DECLS + +/*! + * \brief The classic udp header + */ +typedef struct { + uint16_t src_port; + uint16_t dst_port; + uint16_t length; + uint16_t checksum; +} __attribute__((packed)) u2_udp_hdr_t; + +__U2_END_DECLS + +#endif /* INCLUDED_USRP2_UDP_PACKET_H */ diff --git a/firmware/microblaze/include/vrt/bits.h b/firmware/microblaze/include/vrt/bits.h new file mode 100644 index 000000000..54eeec7b4 --- /dev/null +++ b/firmware/microblaze/include/vrt/bits.h @@ -0,0 +1,92 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_VRT_BITS_H +#define INCLUDED_VRT_BITS_H + +#include <stdint.h> + + +/* VRT Header bits */ + +#define VRTH_PT_MASK (0xf << 28) +#define VRTH_PT_IF_DATA_NO_SID (0x0 << 28) // IF-Data, no stream id +#define VRTH_PT_IF_DATA_WITH_SID (0x1 << 28) // IF-Data, w/ stream id +#define VRTH_PT_EXT_DATA_NO_SID (0x2 << 28) +#define VRTH_PT_EXT_DATA_WITH_SID (0x3 << 28) +#define VRTH_PT_IF_CONTEXT (0x4 << 28) +#define VRTH_PT_EXT_CONTEXT (0x5 << 28) + +#define VRTH_HAS_CLASSID (1 << 27) +#define VRTH_HAS_TRAILER (1 << 26) // Data pkts only +#define VRTH_START_OF_BURST (1 << 25) // Data (Tx) pkts only +#define VRTH_END_OF_BURST (1 << 24) // Data (Tx) pkts only +#define VRTH_TSM (1 << 24) // Context pkts only + +#define VRTH_TSI_MASK (0x3 << 22) +#define VRTH_TSI_NONE (0x0 << 22) +#define VRTH_TSI_UTC (0x1 << 22) +#define VRTH_TSI_GPS (0x2 << 22) +#define VRTH_TSI_OTHER (0x3 << 22) + +#define VRTH_TSF_MASK (0x3 << 20) +#define VRTH_TSF_NONE (0x0 << 20) +#define VRTH_TSF_SAMPLE_CNT (0x1 << 20) +#define VRTH_TSF_REAL_TIME_PS (0x2 << 20) +#define VRTH_TSF_FREE_RUNNING (0x3 << 20) + +#define VRTH_PKT_CNT_SHIFT 16 +#define VRTH_PKT_CNT_MASK (0xf << 16) + +#define VRTH_PKT_SIZE_MASK 0xffff + + +static inline int +vrth_pkt_cnt(uint32_t h) +{ + return (h & VRTH_PKT_CNT_MASK) >> 16; +} + +static inline int +vrth_pkt_size(uint32_t h) +{ + return h & VRTH_PKT_SIZE_MASK; +} + +/* + * Trailer bits + */ +#define TR_E (1 << 8) + +#define TR_ENABLE(x) ((x) << 20) +#define TR_STATE(x) ((x) << 8) + +// Use these with TR_ENABLE and TR_STATE +#define TR_CAL_TIME (1 << 11) +#define TR_VALID_DATA (1 << 10) +#define TR_REF_LOCK (1 << 9) +#define TR_AGC (1 << 8) +#define TR_DETECTED_SIG (1 << 7) +#define TR_SPECTRAL_INVERSION (1 << 6) +#define TR_OVER_RANGE (1 << 5) +#define TR_SAMPLE_LOSS (1 << 4) +#define TR_USER_3 (1 << 3) +#define TR_USER_2 (1 << 2) +#define TR_USER_1 (1 << 1) +#define TR_USER_0 (1 << 0) + +#endif /* INCLUDED_VRT_BITS_H */ diff --git a/firmware/microblaze/include/vrt/types.h b/firmware/microblaze/include/vrt/types.h new file mode 100644 index 000000000..edfa4ec37 --- /dev/null +++ b/firmware/microblaze/include/vrt/types.h @@ -0,0 +1,138 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_VRT_TYPES_H +#define INCLUDED_VRT_TYPES_H + +#include <stdint.h> + +/* macros for dealing with fixed point numbers */ +#define _FXPT_C(_type, _x, _rp) ((_type)((_x)*(1ll << _rp))) +#define _FXPT_TO_INT(_x, _one) (((_x) + ((_one)/2))/(_one)) +#define _FXPT_TO_DOUBLE(_x, _one) ((double)(_x) * (1.0/(_one))) + +/*********************************************************************** + * The VRT Altitude Type (meters) + **********************************************************************/ +typedef int32_t vrt_altitude_t; +#define VRT_ALTITUDE_RP 5 +#define VRT_ALTITUDE_C(_x) _FXPT_C(vrt_altitude_t, _x, VRT_ALTITUDE_RP) + +static inline vrt_altitude_t +double_to_vrt_altitude(double num){ + return VRT_ALTITUDE_C(num); +} + +static inline int32_t +vrt_altitude_round_to_int(vrt_altitude_t fx){ + return _FXPT_TO_INT(fx, VRT_ALTITUDE_C(1)); +} + +static inline double +vrt_altitude_to_double(vrt_altitude_t fx){ + return _FXPT_TO_DOUBLE(fx, VRT_ALTITUDE_C(1)); +} + +/*********************************************************************** + * The VRT Geolocation Angle Type (degrees) + **********************************************************************/ +typedef int32_t vrt_geo_angle_t; +#define VRT_GEO_ANGLE_RP 22 +#define VRT_GEO_ANGLE_C(_x) _FXPT_C(vrt_geo_angle_t, _x, VRT_GEO_ANGLE_RP) + +static inline vrt_geo_angle_t +double_to_vrt_geo_angle(double num){ + return VRT_GEO_ANGLE_C(num); +} + +static inline int16_t +vrt_geo_angle_round_to_int(vrt_geo_angle_t fx){ + return _FXPT_TO_INT(fx, VRT_GEO_ANGLE_C(1)); +} + +static inline double +vrt_geo_angle_to_double(vrt_geo_angle_t fx){ + return _FXPT_TO_DOUBLE(fx, VRT_GEO_ANGLE_C(1)); +} + +/*********************************************************************** + * The VRT Frequency Type (Hz) + **********************************************************************/ +typedef int64_t vrt_freq_t; +#define VRT_FREQ_RP 20 +#define VRT_FREQ_C(_x) _FXPT_C(vrt_freq_t, _x, VRT_FREQ_RP) + +static inline vrt_freq_t +double_to_vrt_freq(double num){ + return VRT_FREQ_C(num); +} + +static inline int64_t +vrt_freq_round_to_int(vrt_freq_t fx){ + return _FXPT_TO_INT(fx, VRT_FREQ_C(1)); +} + +static inline double +vrt_freq_to_double(vrt_freq_t fx){ + return _FXPT_TO_DOUBLE(fx, VRT_FREQ_C(1)); +} + +/*********************************************************************** + * The VRT Gain Type (dB) + **********************************************************************/ +typedef int16_t vrt_gain_t; +#define VRT_GAIN_RP 7 +#define VRT_GAIN_C(_x) _FXPT_C(vrt_gain_t, _x, VRT_GAIN_RP) + +static inline vrt_gain_t +double_to_vrt_gain(double num){ + return VRT_GAIN_C(num); +} + +static inline int16_t +vrt_gain_round_to_int(vrt_gain_t fx){ + return _FXPT_TO_INT(fx, VRT_GAIN_C(1)); +} + +static inline double +vrt_gain_to_double(vrt_gain_t fx){ + return _FXPT_TO_DOUBLE(fx, VRT_GAIN_C(1)); +} + +/*********************************************************************** + * The VRT Temperature Type (Celcius) + **********************************************************************/ +typedef int16_t vrt_temp_t; +#define VRT_TEMP_RP 6 +#define VRT_TEMP_C(_x) _FXPT_C(vrt_temp_t, _x, VRT_TEMP_RP) + +static inline vrt_temp_t +double_to_vrt_temp(double num){ + return VRT_TEMP_C(num); +} + +static inline int16_t +vrt_temp_round_to_int(vrt_temp_t fx){ + return _FXPT_TO_INT(fx, VRT_TEMP_C(1)); +} + +static inline double +vrt_temp_to_double(vrt_temp_t fx){ + return _FXPT_TO_DOUBLE(fx, VRT_TEMP_C(1)); +} + +#endif /* INCLUDED_VRT_TYPES_H */ diff --git a/firmware/microblaze/lib/.gitignore b/firmware/microblaze/lib/.gitignore new file mode 100644 index 000000000..5d838bf6c --- /dev/null +++ b/firmware/microblaze/lib/.gitignore @@ -0,0 +1,40 @@ +*~ +/*-stamp +/*.a +/*.bin +/*.dump +/*.log +/*.rom +/.deps +/Makefile +/Makefile.in +/aclocal.m4 +/autom4te.cache +/blink_leds +/blink_leds2 +/build +/compile +/config.h +/config.h.in +/config.log +/config.status +/configure +/depcomp +/eth_test +/gen_eth_packets +/ibs_rx_test +/ibs_tx_test +/install-sh +/libtool +/ltmain.sh +/missing +/py-compile +/rcv_eth_packets +/run_tests.sh +/stamp-h1 +/test1 +/test_phy_comm +/timer_test +/buf_ram_test +/buf_ram_zero +/hello diff --git a/firmware/microblaze/lib/Makefile.am b/firmware/microblaze/lib/Makefile.am new file mode 100644 index 000000000..9119a4391 --- /dev/null +++ b/firmware/microblaze/lib/Makefile.am @@ -0,0 +1,98 @@ +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(top_srcdir)/Makefile.common + +noinst_LIBRARIES = \ + libu2fw.a + + +libu2fw_a_SOURCES = \ + abort.c \ + ad9510.c \ + ad9777.c \ + bsm12.c \ + buffer_pool.c \ + clocks.c \ + db_basic.c \ + db_dbsrx.c \ + db_init.c \ + db_rfx.c \ + db_tvrx.c \ + db_xcvr2450.c \ + dbsm.c \ + eeprom.c \ + ethernet.c \ + eth_mac.c \ + _exit.c \ + exit.c \ + hal_io.c \ + hal_uart.c \ + i2c.c \ + lsadc.c \ + lsdac.c \ + mdelay.c \ + memcpy_wa.c \ + memset_wa.c \ + nonstdio.c \ + pic.c \ + print_mac_addr.c \ + print_rmon_regs.c \ + print_fxpt.c \ + print_buffer.c \ + printf.c \ + sd.c \ + spi.c \ + u2_init.c + + +noinst_HEADERS = \ + ad9510.h \ + ad9777.h \ + ad9777_regs.h \ + bsm12.h \ + buffer_pool.h \ + clocks.h \ + db.h \ + db_base.h \ + dbsm.h \ + eth_mac.h \ + eth_mac_regs.h \ + eth_phy.h \ + ethernet.h \ + hal_io.h \ + hal_uart.h \ + i2c.h \ + lsadc.h \ + lsdac.h \ + mdelay.h \ + memcpy_wa.h \ + memory_map.h \ + memset_wa.h \ + nonstdio.h \ + pic.h \ + print_rmon_regs.h \ + sd.h \ + spi.h \ + stdint.h \ + stdio.h \ + u2_init.h \ + usrp2_bytesex.h \ + wb16550.h + +EXTRA_DIST = \ + microblaze.ld diff --git a/firmware/microblaze/lib/_exit.c b/firmware/microblaze/lib/_exit.c new file mode 100644 index 000000000..9b40ab2ee --- /dev/null +++ b/firmware/microblaze/lib/_exit.c @@ -0,0 +1,27 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * Stub so we can compile using 3.4 based mb-gcc + */ +void +_exit(int status) +{ + while (1) + ; +} diff --git a/firmware/microblaze/lib/abort.c b/firmware/microblaze/lib/abort.c new file mode 100644 index 000000000..d1d709392 --- /dev/null +++ b/firmware/microblaze/lib/abort.c @@ -0,0 +1,32 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <nonstdio.h> + +extern void _exit(int status); + +void +abort(void) +{ + putstr("\n\nabort\n"); + // FIXME loop blinking leds + _exit(-1); +} diff --git a/firmware/microblaze/lib/ad9510.c b/firmware/microblaze/lib/ad9510.c new file mode 100644 index 000000000..4d3acb65d --- /dev/null +++ b/firmware/microblaze/lib/ad9510.c @@ -0,0 +1,42 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "ad9510.h" +#include "spi.h" +#include <memory_map.h> + +#define RD (1 << 15) +#define WR (0 << 15) + +void +ad9510_write_reg(int regno, uint8_t value) +{ + uint32_t inst = WR | (regno & 0xff); + uint32_t v = (inst << 8) | (value & 0xff); + spi_transact(SPI_TXONLY, SPI_SS_AD9510, v, 24, SPIF_PUSH_FALL); +} + +int +ad9510_read_reg(int regno) +{ + uint32_t inst = RD | (regno & 0xff); + uint32_t v = (inst << 8) | 0; + uint32_t r = spi_transact(SPI_TXRX, SPI_SS_AD9510, v, 24, + SPIF_PUSH_FALL | SPIF_LATCH_FALL); + return r & 0xff; +} diff --git a/firmware/microblaze/lib/ad9510.h b/firmware/microblaze/lib/ad9510.h new file mode 100644 index 000000000..a395e5223 --- /dev/null +++ b/firmware/microblaze/lib/ad9510.h @@ -0,0 +1,30 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_AD9510_H +#define INCLUDED_AD9510_H + +#include <stdint.h> + +/* + * Analog Device AD9510 1.2 GHz Clock Distribution IC w/ PLL + */ + +void ad9510_write_reg(int regno, uint8_t value); +int ad9510_read_reg(int regno); + +#endif /* INCLUDED_AD9510_H */ diff --git a/firmware/microblaze/lib/ad9777.c b/firmware/microblaze/lib/ad9777.c new file mode 100644 index 000000000..734ccd7e5 --- /dev/null +++ b/firmware/microblaze/lib/ad9777.c @@ -0,0 +1,47 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "ad9777.h" +#include "memory_map.h" +#include "spi.h" + +#define IB_RD 0x80 +#define IB_WR 0x00 +#define IB_XFER_1 0x00 +#define IB_XFER_2 0x20 +#define IB_XFER_3 0x40 +#define IB_XFER_4 0x60 +#define IB_ADDR_MASK 0x1f + +void +ad9777_write_reg(int regno, uint8_t value) +{ + uint8_t instr = IB_WR | IB_XFER_1 | (regno & IB_ADDR_MASK); + spi_transact(SPI_TXONLY, SPI_SS_AD9777, + (instr << 8) | (value & 0xff), 16, SPIF_PUSH_FALL); +} + +int +ad9777_read_reg(int regno) +{ + uint8_t instr = IB_RD | IB_XFER_1 | (regno & IB_ADDR_MASK); + uint32_t r = spi_transact(SPI_TXRX, SPI_SS_AD9777, + (instr << 8) | 0, 16, + SPIF_PUSH_FALL | SPIF_LATCH_RISE); + return r & 0xff; +} diff --git a/firmware/microblaze/lib/ad9777.h b/firmware/microblaze/lib/ad9777.h new file mode 100644 index 000000000..d4d104910 --- /dev/null +++ b/firmware/microblaze/lib/ad9777.h @@ -0,0 +1,31 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_AD9777_H +#define INCLUDED_AD9777_H + +#include <stdint.h> +#include "ad9777_regs.h" + +/* + * Analog Devices AD9777 16-bit, 160 MS/s, Dual Interpolating TxDAC + */ + +void ad9777_write_reg(int regno, uint8_t value); +int ad9777_read_reg(int regno); + +#endif /* INCLUDED_AD9777_H */ diff --git a/firmware/microblaze/lib/ad9777_regs.h b/firmware/microblaze/lib/ad9777_regs.h new file mode 100644 index 000000000..de2936c15 --- /dev/null +++ b/firmware/microblaze/lib/ad9777_regs.h @@ -0,0 +1,71 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_AD9777_REGS_H +#define INCLUDED_AD9777_REGS_H + +#define R0_SW_RESET (1 << 5) +#define R0_SLEEP (1 << 4) +#define R0_POWER_DN (1 << 3) +#define R0_1R (1 << 2) +#define R0_2R (0 << 2) +#define R0_PLL_LOCKED (1 << 1) + +#define R1_INTERP_1X 0x00 +#define R1_INTERP_2X 0x40 +#define R1_INTERP_4X 0x80 +#define R1_INTERP_8X 0xC0 +#define R1_MOD_NONE 0x00 +#define R1_MOD_FS_2 0x10 // Fs/2 +#define R1_MOD_FS_4 0x20 // Fs/4 +#define R1_MOD_FS_8 0x30 // Fs/8 +#define R1_ZERO_STUFF (1 << 3) // N.B., doubles output rate +#define R1_REAL_MIX (1 << 2) +#define R1_CMPLX_MIX (0 << 2) +#define R1_POS_EXP (1 << 1) // exp(+jwt) +#define R1_NEG_EXP (0 << 1) // exp(-jwt) +#define R1_DATACLK_OUT (1 << 0) + +#define R2_2S_COMP (0 << 7) +#define R2_2PORT_MODE (0 << 6) +#define R2_1PORT_MODE (1 << 6) + +#define R3_PLL_DIV_1 0x00 +#define R3_PLL_DIV_2 0x01 +#define R3_PLL_DIV_4 0x02 +#define R3_PLL_DIV_8 0x03 + +#define R4_PLL_ON (1 << 7) +#define R4_CP_MANUAL (1 << 6) +#define R4_CP_AUTO (0 << 6) +#define R4_CP_50uA (0x00 | R4_CP_MANUAL) +#define R4_CP_100uA (0x01 | R4_CP_MANUAL) +#define R4_CP_200uA (0x02 | R4_CP_MANUAL) +#define R4_CP_400uA (0x03 | R4_CP_MANUAL) +#define R4_CP_800uA (0x07 | R4_CP_MANUAL) + +#define R5_I_FINE_GAIN(g) (g) // 8-bits +#define R6_I_COARSE_GAIN(g) ((g) & 0xf) // low 4-bits + +#define R9_Q_FINE_GAIN(g) (g) // 8-bits +#define R10_Q_COARSE_GAIN(g) ((g) & 0xf) // low 4-bits + + +// FIXME more registers for offset and gain control... + + +#endif /* INCLUDED_AD9777_REGS_H */ diff --git a/firmware/microblaze/lib/bsm12.c b/firmware/microblaze/lib/bsm12.c new file mode 100644 index 000000000..3f17fe42d --- /dev/null +++ b/firmware/microblaze/lib/bsm12.c @@ -0,0 +1,319 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * buffer state machine: 1 input to two outputs + * + * Typically used to read packets from the ethernet and then after inspecting, + * handle the packet in firmware or pass it on to 1 of the 2 buffer destinations. + */ + +#ifdef HAVE_CONFIG_H +#include <config.h> +#endif + +#include "bsm12.h" +#include "memory_map.h" +#include "buffer_pool.h" +#include <stdbool.h> +#include "nonstdio.h" +#include <stdlib.h> + +typedef enum { + BS_EMPTY, + BS_FILLING, + BS_FULL, + BS_EMPTYING, +} buffer_state_t; + +static buffer_state_t buffer_state[NBUFFERS]; +static uint32_t last_send_ctrl[NBUFFERS]; +static int8_t buffer_target[NBUFFERS]; // -1, 0 or 1. +static uint8_t buffer_dst[NBUFFERS]; // 0 or 1. Valid only when BF_EMPTYING + +#define ST_IDLE (-1) + +void +bsm12_init(bsm12_t *sm, int buf0, + const buf_cmd_args_t *recv, + const buf_cmd_args_t *send0, + const buf_cmd_args_t *send1, + bsm12_inspector_t inspect) +{ + if (buf0 & 0x3) // precondition: buf0 % 4 == 0 + abort(); + + sm->buf0 = buf0; + sm->running = false; + sm->recv_args = *recv; + sm->send_args[0] = *send0; + sm->send_args[1] = *send1; + + sm->rx_state = ST_IDLE; + sm->tx_state[0] = ST_IDLE; + sm->tx_state[1] = ST_IDLE; + + sm->inspect = inspect; + + sm->bps_error = BPS_ERROR(buf0 + 0) | BPS_ERROR(buf0 + 1) | BPS_ERROR(buf0 + 2); + sm->bps_done = BPS_DONE(buf0 + 0) | BPS_DONE(buf0 + 1) | BPS_DONE(buf0 + 2); + sm->bps_error_or_done = sm->bps_error | sm->bps_done; + + // How much to adjust the last_line register. + // It's 1 for everything but the ethernet. + sm->last_line_adj = recv->port == PORT_ETH ? 3 : 1; + + buffer_state[sm->buf0 + 0] = BS_EMPTY; + buffer_state[sm->buf0 + 1] = BS_EMPTY; + buffer_state[sm->buf0 + 2] = BS_EMPTY; + + buffer_target[sm->buf0 + 0] = -1; + buffer_target[sm->buf0 + 1] = -1; + buffer_target[sm->buf0 + 2] = -1; + + for (int i = 0; i < NBUFFERS; i++) + sm->next_buf[i] = buf0; + + sm->next_buf[buf0 + 0] = buf0 + 1; + sm->next_buf[buf0 + 1] = buf0 + 2; + sm->next_buf[buf0 + 2] = buf0 + 0; + + for (int i = 0; i < 3; i++){ + sm->precomputed_receive_to_buf_ctrl_word[i] = + (BPC_READ + | BPC_BUFFER(sm->buf0 + i) + | BPC_PORT(sm->recv_args.port) + | BPC_STEP(1) + | BPC_FIRST_LINE(sm->recv_args.first_line) + | BPC_LAST_LINE(sm->recv_args.last_line)); + + for (int j = 0; j < 2; j++){ + sm->precomputed_send_from_buf_ctrl_word[i][j] = + (BPC_WRITE + | BPC_BUFFER(sm->buf0 + i) + | BPC_PORT(sm->send_args[j].port) + | BPC_STEP(1) + | BPC_FIRST_LINE(sm->send_args[j].first_line) + | BPC_LAST_LINE(0)); // last line filled in at runtime + } + } +} + +static inline void +bsm12_receive_to_buf(bsm12_t *sm, int bufno) +{ + buffer_pool_ctrl->ctrl = sm->precomputed_receive_to_buf_ctrl_word[bufno & 0x3]; +} + +static inline void +bsm12_send_from_buf(bsm12_t *sm, int bufno, int dst_idx) +{ + dst_idx &= 0x1; + + uint32_t t = + (sm->precomputed_send_from_buf_ctrl_word[bufno & 0x3][dst_idx] + | BPC_LAST_LINE(buffer_pool_status->last_line[bufno] - sm->last_line_adj)); + + buffer_pool_ctrl->ctrl = t; + last_send_ctrl[bufno] = t; + buffer_dst[bufno] = dst_idx; +} + +static inline void +bsm12_resend_from_buf(bsm12_t *sm, int bufno) +{ + buffer_pool_ctrl->ctrl = last_send_ctrl[bufno]; +} + +void +bsm12_start(bsm12_t *sm) +{ + sm->running = true; + + buffer_state[sm->buf0 + 0] = BS_EMPTY; + buffer_state[sm->buf0 + 1] = BS_EMPTY; + buffer_state[sm->buf0 + 2] = BS_EMPTY; + + buffer_target[sm->buf0 + 0] = -1; + buffer_target[sm->buf0 + 1] = -1; + buffer_target[sm->buf0 + 2] = -1; + + bp_clear_buf(sm->buf0 + 0); + bp_clear_buf(sm->buf0 + 1); + bp_clear_buf(sm->buf0 + 2); + + sm->rx_state = 0; + sm->tx_state[0] = ST_IDLE; + sm->tx_state[1] = ST_IDLE; + bsm12_receive_to_buf(sm, sm->buf0); + buffer_state[sm->buf0] = BS_FILLING; +} + +void +bsm12_stop(bsm12_t *sm) +{ + sm->running = false; + bp_clear_buf(sm->buf0 + 0); + bp_clear_buf(sm->buf0 + 1); + bp_clear_buf(sm->buf0 + 2); + buffer_state[sm->buf0 + 0] = BS_EMPTY; + buffer_state[sm->buf0 + 1] = BS_EMPTY; + buffer_state[sm->buf0 + 2] = BS_EMPTY; +} + +static void bsm12_process_helper(bsm12_t *sm, int buf_this); +static void bsm12_error_helper(bsm12_t *sm, int buf_this); + +void +bsm12_process_status(bsm12_t *sm, uint32_t status) +{ + // anything for us? + if ((status & sm->bps_error_or_done) == 0 || !sm->running) + return; + + if (status & sm->bps_error){ + // Most likely an ethernet Rx error. We just restart the transfer. + if (status & (BPS_ERROR(sm->buf0 + 0))) + bsm12_error_helper(sm, sm->buf0 + 0); + + if (status & (BPS_ERROR(sm->buf0 + 1))) + bsm12_error_helper(sm, sm->buf0 + 1); + + if (status & (BPS_ERROR(sm->buf0 + 2))) + bsm12_error_helper(sm, sm->buf0 + 2); + } + + if (status & BPS_DONE(sm->buf0 + 0)) + bsm12_process_helper(sm, sm->buf0 + 0); + + if (status & BPS_DONE(sm->buf0 + 1)) + bsm12_process_helper(sm, sm->buf0 + 1); + + if (status & BPS_DONE(sm->buf0 + 2)) + bsm12_process_helper(sm, sm->buf0 + 2); +} + + static void +bsm12_process_helper(bsm12_t *sm, int buf_this) +{ + bp_clear_buf(buf_this); + + if (buffer_state[buf_this] == BS_FILLING){ + + buffer_state[buf_this] = BS_FULL; + buffer_target[buf_this] = -1; + + // + // where does this packet go? + // + int dst = sm->inspect(sm, buf_this); + if (dst == -1){ + // + // f/w handled the packet; refill the buffer + // + bsm12_receive_to_buf(sm, buf_this); + buffer_state[buf_this] = BS_FILLING; + buffer_target[buf_this] = -1; + sm->rx_state = buf_this & 0x3; + } + else { // goes to dst 0 or 1 + // + // If the next buffer is empty, start a receive on it + // + int t = sm->next_buf[buf_this]; + if (buffer_state[t] == BS_EMPTY){ + bsm12_receive_to_buf(sm, t); + buffer_state[t] = BS_FILLING; + buffer_target[t] = -1; + sm->rx_state = t & 0x3; + } + else + sm->rx_state = ST_IDLE; + + // + // If the destination is idle, start the xfer, othewise remember it + // + if (sm->tx_state[dst] == ST_IDLE){ + bsm12_send_from_buf(sm, buf_this, dst); + sm->tx_state[dst] = buf_this & 0x3; + buffer_state[buf_this] = BS_EMPTYING; + buffer_target[buf_this] = -1; + } + else { + buffer_target[buf_this] = dst; + } + } + } + + else { // BS_EMPTYING + + buffer_state[buf_this] = BS_EMPTY; + buffer_target[buf_this] = -1; + + if (sm->rx_state == ST_IDLE){ // fire off another receive + sm->rx_state = buf_this & 0x3; + bsm12_receive_to_buf(sm, buf_this); + buffer_state[buf_this] = BS_FILLING; + buffer_target[buf_this] = -1; + } + + int dst = buffer_dst[buf_this]; // the dst we were emptying into + // is the next buffer full and for us? + int t = sm->next_buf[buf_this]; + if (buffer_target[t] == dst){ // yes, + bsm12_send_from_buf(sm, t, dst); // send it + buffer_state[t] = BS_EMPTYING; + buffer_target[t] = -1; + sm->tx_state[dst] = t & 0x3; + } + // how about the one after that? + else if (buffer_target[t=sm->next_buf[t]] == dst){ // yes, + bsm12_send_from_buf(sm, t, dst); // send it + buffer_state[t] = BS_EMPTYING; + buffer_target[t] = -1; + sm->tx_state[dst] = t & 0x3; + } + else { + sm->tx_state[dst] = ST_IDLE; + } + } +} + +static void +bsm12_error_helper(bsm12_t *sm, int buf_this) +{ + bp_clear_buf(buf_this); // clears ERROR flag + + if (buffer_state[buf_this] == BS_FILLING){ + bsm12_receive_to_buf(sm, buf_this); // restart the xfer + } + else { // buffer was emptying + bsm12_resend_from_buf(sm, buf_this); // restart the xfer + } +} + + +void +bsm12_handle_tx_underrun(bsm12_t *sm) +{ +} + +void +bsm12_handle_rx_overrun(bsm12_t *sm) +{ +} diff --git a/firmware/microblaze/lib/bsm12.h b/firmware/microblaze/lib/bsm12.h new file mode 100644 index 000000000..b8e576b79 --- /dev/null +++ b/firmware/microblaze/lib/bsm12.h @@ -0,0 +1,83 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_BSM12_H +#define INCLUDED_BSM12_H + +#include "dbsm.h" +#include "memory_map.h" + +/*! + * buffer state machine: 1 input to two outputs + * + * Typically used to read packets from the ethernet and then after inspecting, + * handle the packet in firmware or pass it on to 1 of the 2 buffer destinations. + */ + +struct _bsm12; +typedef struct _bsm12 bsm12_t; + +/*! + * Pointer to function that does packet inspection. + * + * \param sm the state machine + * \param buf_this the index of the buffer to inspect and/or pass on + * + * Returns -1, 0 or 1. If it returns -1, it means that the s/w + * handled that packet, and that it should NOT be passed on to one of + * the buffer endpoints. 0 indicates the first endpoint, 1 the second endpoint. + */ +typedef int (*bsm12_inspector_t)(bsm12_t *sm, int buf_this); + + +/*! + * buffer state machine: 1 input to two outputs + */ +struct _bsm12 +{ + uint8_t buf0; // This machine uses buf0, buf0+1 and buf0+2. buf0 % 4 == 0. + uint8_t running; + int8_t rx_state; // -1, 0, 1, 2 which buffer we're receiving into + int8_t tx_state[2]; // -1, 0, 1, 2 which buffer we're sending from + buf_cmd_args_t recv_args; + buf_cmd_args_t send_args[2]; + bsm12_inspector_t inspect; + int last_line_adj; + uint32_t bps_error; + uint32_t bps_done; + uint32_t bps_error_or_done; + uint8_t next_buf[NBUFFERS]; + uint32_t precomputed_receive_to_buf_ctrl_word[3]; + uint32_t precomputed_send_from_buf_ctrl_word[4][2]; // really only 3, not 4 + // (easier addr comp) +}; + +void bsm12_init(bsm12_t *sm, int buf0, + const buf_cmd_args_t *recv, + const buf_cmd_args_t *send0, + const buf_cmd_args_t *send1, + bsm12_inspector_t inspect); + +void bsm12_start(bsm12_t *sm); +void bsm12_stop(bsm12_t *sm); +void bsm12_process_status(bsm12_t *sm, uint32_t status); +void bsm12_handle_tx_underrun(bsm12_t *sm); +void bsm12_handle_rx_overrun(bsm12_t *sm); + + +#endif /* INCLUDED_BSM12_H */ diff --git a/firmware/microblaze/lib/buffer_pool.c b/firmware/microblaze/lib/buffer_pool.c new file mode 100644 index 000000000..77e7c5213 --- /dev/null +++ b/firmware/microblaze/lib/buffer_pool.c @@ -0,0 +1,72 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "memory_map.h" +#include "buffer_pool.h" +#include "hal_io.h" + +void +bp_init(void) +{ + int i; + bp_disable_port(PORT_SERDES); + bp_disable_port(PORT_DSP); + bp_disable_port(PORT_ETH); + bp_disable_port(PORT_RAM); + + for (i = 0; i < NBUFFERS; i++) + bp_clear_buf(i); +} + +#ifndef INLINE_BUFFER_POOL + +void +bp_clear_buf(int bufnum) +{ + buffer_pool_ctrl->ctrl = BPC_BUFFER(bufnum) | BPC_PORT_NIL | BPC_CLR; +} + +void +bp_disable_port(int portnum) +{ + // disable buffer connections to this port + buffer_pool_ctrl->ctrl = BPC_BUFFER_NIL | BPC_PORT(portnum); +} + +void +bp_receive_to_buf(int bufnum, int port, int step, int fl, int ll) +{ + buffer_pool_ctrl->ctrl = (BPC_READ + | BPC_BUFFER(bufnum) + | BPC_PORT(port) + | BPC_STEP(step) + | BPC_FIRST_LINE(fl) + | BPC_LAST_LINE(ll)); +} + +void +bp_send_from_buf(int bufnum, int port, int step, int fl, int ll) +{ + buffer_pool_ctrl->ctrl = (BPC_WRITE + | BPC_BUFFER(bufnum) + | BPC_PORT(port) + | BPC_STEP(step) + | BPC_FIRST_LINE(fl) + | BPC_LAST_LINE(ll)); +} + +#endif diff --git a/firmware/microblaze/lib/buffer_pool.h b/firmware/microblaze/lib/buffer_pool.h new file mode 100644 index 000000000..145b20f8d --- /dev/null +++ b/firmware/microblaze/lib/buffer_pool.h @@ -0,0 +1,75 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_BUFFER_POOL_H +#define INCLUDED_BUFFER_POOL_H + +#include "memory_map.h" + +// Buffer Pool Management + + +// define to have common buffer operations inlined +#define INLINE_BUFFER_POOL 1 + +void bp_init(void); + +#ifndef INLINE_BUFFER_POOL + +void bp_clear_buf(int bufnum); +void bp_disable_port(int portnum); +void bp_receive_to_buf(int bufnum, int port, int step, int fl, int ll); +void bp_send_from_buf(int bufnum, int port, int step, int fl, int ll); + +#else + +static inline void +bp_clear_buf(int bufnum) +{ + buffer_pool_ctrl->ctrl = BPC_BUFFER(bufnum) | BPC_PORT_NIL | BPC_CLR; +} + +static inline void +bp_disable_port(int portnum) +{ + // disable buffer connections to this port + buffer_pool_ctrl->ctrl = BPC_BUFFER_NIL | BPC_PORT(portnum); +} + +static inline void +bp_receive_to_buf(int bufnum, int port, int step, int fl, int ll) +{ + buffer_pool_ctrl->ctrl = (BPC_READ + | BPC_BUFFER(bufnum) + | BPC_PORT(port) + | BPC_STEP(step) + | BPC_FIRST_LINE(fl) + | BPC_LAST_LINE(ll)); +} + +static inline void +bp_send_from_buf(int bufnum, int port, int step, int fl, int ll) +{ + buffer_pool_ctrl->ctrl = (BPC_WRITE + | BPC_BUFFER(bufnum) + | BPC_PORT(port) + | BPC_STEP(step) + | BPC_FIRST_LINE(fl) + | BPC_LAST_LINE(ll)); +} +#endif +#endif diff --git a/firmware/microblaze/lib/clocks.c b/firmware/microblaze/lib/clocks.c new file mode 100644 index 000000000..d9d4fcd3c --- /dev/null +++ b/firmware/microblaze/lib/clocks.c @@ -0,0 +1,239 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include <config.h> +#endif +#include <clocks.h> + +#include "memory_map.h" +#include "ad9510.h" +#include "spi.h" +#include "u2_init.h" +#include "nonstdio.h" + +void +clocks_init(void) +{ + // Set up basic clocking functions in AD9510 + ad9510_write_reg(0x45, 0x00); // CLK2 drives distribution + + clocks_enable_fpga_clk(true, 1); + + spi_wait(); + + // Set up PLL for 10 MHz reference + // Reg 4, A counter, Don't Care + ad9510_write_reg(0x05, 0x00); // Reg 5, B counter MSBs, 0 + ad9510_write_reg(0x06, 0x05); // Reg 6, B counter LSBs, 5 + // Reg 7, Loss of reference detect, doesn't work yet, 0 + ad9510_write_reg(0x5A, 0x01); // Update Regs + + // Primary clock configuration + clocks_mimo_config(MC_WE_DONT_LOCK); + + // Set up other clocks + clocks_enable_test_clk(false, 0); + clocks_enable_tx_dboard(false, 0); + clocks_enable_rx_dboard(false, 0); + clocks_enable_eth_phyclk(false, 0); + + // Enable clock to ADCs and DACs + clocks_enable_dac_clk(true, 1); + clocks_enable_adc_clk(true, 1); +} + + +void +clocks_mimo_config(int flags) +{ + if (flags & _MC_WE_LOCK){ + // Reg 8, Charge pump on, dig lock det, positive PFD, 47 + ad9510_write_reg(0x08, 0x47); + } + else { + // Reg 8, Charge pump off, dig lock det, positive PFD + ad9510_write_reg(0x08, 0x00); + } + + // Reg 9, Charge pump current, 0x40=3mA, 0x00=650uA + ad9510_write_reg(0x09, 0x00); + // Reg A, Prescaler of 2, everything normal 04 + ad9510_write_reg(0x0A, 0x04); + // Reg B, R Div MSBs, 0 + ad9510_write_reg(0x0B, 0x00); + // Reg C, R Div LSBs, 1 + ad9510_write_reg(0x0C, 0x01); + // Reg D, Antibacklash, Digital lock det, 0 + + ad9510_write_reg(0x5A, 0x01); // Update Regs + + spi_wait(); + + // Allow for clock switchover + + if (flags & _MC_WE_LOCK){ // WE LOCK + if (flags & _MC_MIMO_CLK_INPUT) { + // Turn on ref output and choose the MIMO connector + output_regs->clk_ctrl = 0x15; + } + else { + // turn on ref output and choose the SMA + output_regs->clk_ctrl = 0x1C; + } + } + else { // WE DONT LOCK + // Disable both ext clk inputs + output_regs->clk_ctrl = 0x10; + } + + // Do we drive a clock onto the MIMO connector? + if (flags & MC_PROVIDE_CLK_TO_MIMO) + clocks_enable_clkexp_out(true,10); + else + clocks_enable_clkexp_out(false,0); +} + +bool +clocks_lock_detect() +{ + if(pic_regs->pending & PIC_CLKSTATUS) + return true; + return false; +} + +int inline +clocks_gen_div(int divisor) +{ + int L,H; + L = (divisor>>1)-1; + H = divisor-L-2; + return (L<<4)|H; +} + +#define CLOCK_OUT_EN 0x08 +#define CLOCK_OUT_DIS_CMOS 0x01 +#define CLOCK_OUT_DIS_PECL 0x02 +#define CLOCK_DIV_DIS 0x80 +#define CLOCK_DIV_EN 0x00 + +#define CLOCK_MODE_PECL 1 +#define CLOCK_MODE_LVDS 2 +#define CLOCK_MODE_CMOS 3 + +void +clocks_enable_XXX_clk(bool enable, int divisor, int reg_en, int reg_div, int mode) +{ + int enable_word, div_word, div_en_word; + + switch(mode) { + case CLOCK_MODE_PECL : + enable_word = enable ? 0x08 : 0x0A; + break; + case CLOCK_MODE_LVDS : + enable_word = enable ? 0x02 : 0x03; + break; + case CLOCK_MODE_CMOS : + enable_word = enable ? 0x08 : 0x09; + break; + } + if(enable && (divisor>1)) { + div_word = clocks_gen_div(divisor); + div_en_word = CLOCK_DIV_EN; + } + else { + div_word = 0; + div_en_word = CLOCK_DIV_DIS; + } + + ad9510_write_reg(reg_en,enable_word); // Output en/dis + ad9510_write_reg(reg_div,div_word); // Set divisor + ad9510_write_reg(reg_div+1,div_en_word); // Enable or Bypass Divider + ad9510_write_reg(0x5A, 0x01); // Update Regs +} + +// Clock 0 +void +clocks_enable_test_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x3C,0x48,CLOCK_MODE_PECL); +} + +// Clock 1 +void +clocks_enable_fpga_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x3D,0x4A,CLOCK_MODE_PECL); +} + +// Clock 2 on Rev 3, Clock 5 on Rev 4 +void +clocks_enable_clkexp_out(bool enable, int divisor) +{ + if(u2_hw_rev_major == 3) + clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); + else if(u2_hw_rev_major == 4) { + ad9510_write_reg(0x34,0x00); // Turn on fine delay + ad9510_write_reg(0x35,0x00); // Set Full Scale to nearly 10ns + ad9510_write_reg(0x36,0x1c); // Set fine delay. 0x20 is midscale + clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); + + } + else + putstr("ERR: Invalid Rev\n"); +} + +// Clock 5 on Rev 3, none (was 2) on Rev 4 +void +clocks_enable_eth_phyclk(bool enable, int divisor) +{ + if(u2_hw_rev_major == 3) + clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); + else if(u2_hw_rev_major == 4) + clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); + else + putstr("ERR: Invalid Rev\n"); +} + +// Clock 3 +void +clocks_enable_dac_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x3F,0x4E,CLOCK_MODE_PECL); +} + +// Clock 4 +void +clocks_enable_adc_clk(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x40,0x50,CLOCK_MODE_LVDS); +} + +// Clock 6 +void +clocks_enable_tx_dboard(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x42,0x54,CLOCK_MODE_CMOS); +} + +// Clock 7 +void +clocks_enable_rx_dboard(bool enable, int divisor) +{ + clocks_enable_XXX_clk(enable,divisor,0x43,0x56,CLOCK_MODE_CMOS); +} diff --git a/firmware/microblaze/lib/clocks.h b/firmware/microblaze/lib/clocks.h new file mode 100644 index 000000000..141fc61e0 --- /dev/null +++ b/firmware/microblaze/lib/clocks.h @@ -0,0 +1,95 @@ +// +// Copyright 2010 Ettus Research LLC +// +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_CLOCKS_H +#define INCLUDED_CLOCKS_H + +/* + * Routines to configure our multitude of clocks + */ + +#include <stdbool.h> +#include <usrp2_clock_bits.h> + + +/*! + * One time call to initialize all clocks to a reasonable state. We + * come out of here using our free running 100MHz oscilator and not + * providing a clock to the MIMO connector (CMC_WE_DONT_LOCK) + */ +void clocks_init(void); + + +/*! + * \brief MIMO clock configuration. + * + * Configure our master clock source, and whether or not we drive a + * clock onto the mimo connector. See MC_flags in usrp2_mimo_config.h. + */ +void clocks_mimo_config(int flags); + +/*! + * \brief Lock Detect -- Return True if our PLL is locked + */ +bool clocks_lock_detect(); + +/*! + * \brief Enable or disable test clock (extra clock signal) + */ +void clocks_enable_test_clk(bool enable, int divisor); + +/*! + * \brief Enable or disable fpga clock. Disabling would wedge and require a power cycle. + */ +void clocks_enable_fpga_clk(bool enable, int divisor); + +/*! + * \brief Enable or disable clock output sent to MIMO connector + */ +void clocks_enable_clkexp_out(bool enable, int divisor); + +/*! + * \brief Enable or disable ethernet phyclk, should always be disabled + */ +void clocks_enable_eth_phyclk(bool enable, int divisor); + +/*! + * \brief Enable or disable clock to DAC + */ +void clocks_enable_dac_clk(bool enable, int divisor); + +/*! + * \brief Enable or disable clock to ADC + */ +void clocks_enable_adc_clk(bool enable, int divisor); + +/*! + * \brief Enable or disable clock to Rx daughterboard + */ +void clocks_enable_rx_dboard(bool enable, int divisor); + + +/*! + * \brief Enable or disable clock to Tx daughterboard + */ +void clocks_enable_tx_dboard(bool enable, int divisor); + + +#endif /* INCLUDED_CLOCKS_H */ diff --git a/firmware/microblaze/lib/db.h b/firmware/microblaze/lib/db.h new file mode 100644 index 000000000..cec960267 --- /dev/null +++ b/firmware/microblaze/lib/db.h @@ -0,0 +1,104 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * Interface to daughterboard code + */ + +#ifndef INCLUDED_DB_H +#define INCLUDED_DB_H + +#include <usrp2_types.h> + + +struct db_base; + +/* pointers to daughterboard structures */ +extern struct db_base *tx_dboard; +extern struct db_base *rx_dboard; + + +//! Intermediate tuning information + +struct tune_result +{ + //! The RF frequency that corresponds to DC in the IF from the daughterboard + u2_fxpt_freq_t baseband_freq; + + //! The DDC/DUC frequency used to down/up convert to/from the target frequency + u2_fxpt_freq_t dxc_freq; + + //! Any differerence btwn target and actual (typically < 0.01 Hz) + u2_fxpt_freq_t residual_freq; + + //! Is the complex baseband spectrum inverted + bool inverted; +}; + + +/*! + * \brief One-time init at powerup + * + * Sets rx_dboard, tx_dboard and initializes daughterboards. + */ +void +db_init(void); + +/*! + * \brief Set daughterboard LO offset frequency. + * + * \param[in] db is the daughterboard instance + * \param[in] offset is the amount to add to tuning requests + * \param[out] success or failure + */ +bool +db_set_lo_offset(struct db_base *db, u2_fxpt_freq_t offset); + +/*! + * \brief Two stage tuning. Given target_freq, tune LO and DDC/DUC + * + * \param[in] db is the daughterboard instance + * \param[in] target_freq is the freq to translate the complex baseband to/from. + * \param[out] result provides details of the resulting configuration. + * + */ +bool +db_tune(struct db_base *db, u2_fxpt_freq_t target_freq, struct tune_result *result); + + +/* + * Set only the DDC frequency + */ +bool +db_set_ddc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq); + +/* + * Set only the DUC frequency + */ +bool +db_set_duc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq); + + +/*! + * \brief Set gain + */ +bool +db_set_gain(struct db_base *db, u2_fxpt_gain_t gain); + + +#endif /* INCLUDED_DB_H */ diff --git a/firmware/microblaze/lib/db_base.h b/firmware/microblaze/lib/db_base.h new file mode 100644 index 000000000..8144c8560 --- /dev/null +++ b/firmware/microblaze/lib/db_base.h @@ -0,0 +1,69 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_DB_BASE_H +#define INCLUDED_DB_BASE_H + +#include <usrp2_types.h> +#include <stdbool.h> + +/*! + * \brief "base class" for firmware version of daughterboard code + */ +struct db_base { + uint16_t dbid; //< daughterboard ID + + uint16_t is_tx : 1; //< is this a transmit db? + uint16_t is_quadrature : 1; + uint16_t i_and_q_swapped : 1; + uint16_t spectrum_inverted : 1; + + uint16_t output_enables; //< bitmask of which pins should be outputs from FPGA + uint16_t used_pins; //< bitmask of pins used by the daughterboard + + u2_fxpt_freq_t freq_min; //< min freq that can be set (Hz) + u2_fxpt_freq_t freq_max; //< max freq that can be set (Hz) + + u2_fxpt_gain_t gain_min; //< min gain that can be set (dB) + u2_fxpt_gain_t gain_max; //< max gain that can be set (dB) + u2_fxpt_gain_t gain_step_size; //< (dB) + + u2_fxpt_freq_t default_lo_offset; //< offset to add to tune frequency, reset value + u2_fxpt_freq_t current_lo_offset; //< current value of lo_offset + + /* + * Auto T/R control values + */ + uint32_t atr_mask; //< which bits to control + uint32_t atr_txval; //< value to use when transmitting + uint32_t atr_rxval; //< value to use when receiving + + //! delay in clk ticks from when Tx fifo gets data to when T/R switches + // uint32_t atr_tx_delay; + + //! delay in clk ticks from when Tx fifo goes empty to when T/R switches + // uint32_t atr_rx_delay; + + bool (*init)(struct db_base *); + bool (*set_freq)(struct db_base *, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc); + bool (*set_gain)(struct db_base *, u2_fxpt_gain_t gain); + bool (*set_tx_enable)(struct db_base *, bool on); +}; + + +#endif /* INCLUDED_DB_BASE_H */ diff --git a/firmware/microblaze/lib/db_basic.c b/firmware/microblaze/lib/db_basic.c new file mode 100644 index 000000000..2bd4ebfbe --- /dev/null +++ b/firmware/microblaze/lib/db_basic.c @@ -0,0 +1,161 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include <db_base.h> + +bool db_basic_init(struct db_base *db); +bool db_basic_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc); +bool db_basic_set_gain(struct db_base *db, u2_fxpt_gain_t gain); +bool db_basic_set_tx_enable(struct db_base *, bool on); + +struct db_basic { + struct db_base base; +}; + + +struct db_basic db_basic_tx = { + .base.dbid = 0x0000, + .base.is_tx = true, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(-90e9), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(90e9), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.atr_mask = 0, + .base.atr_txval = 0, + .base.atr_rxval = 0, + //.base.atr_tx_delay = 0, + //.base.atr_rx_delay = 0, + + .base.init = db_basic_init, + .base.set_freq = db_basic_set_freq, + .base.set_gain = db_basic_set_gain, + .base.set_tx_enable = db_basic_set_tx_enable, +}; + +struct db_basic db_basic_rx = { + .base.dbid = 0x0001, + .base.is_tx = false, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(-90e9), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(90e9), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.is_quadrature = false, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.atr_mask = 0, + .base.atr_txval = 0, + .base.atr_rxval = 0, + //.base.atr_tx_delay = 0, + //.base.atr_rx_delay = 0, + + .base.init = db_basic_init, + .base.set_freq = db_basic_set_freq, + .base.set_gain = db_basic_set_gain, + .base.set_tx_enable = db_basic_set_tx_enable, +}; + +struct db_basic db_lf_tx = { + .base.dbid = 0x000e, + .base.is_tx = true, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(-32e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(32e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.atr_mask = 0, + .base.atr_txval = 0, + .base.atr_rxval = 0, + //.base.atr_tx_delay = 0, + //.base.atr_rx_delay = 0, + + .base.init = db_basic_init, + .base.set_freq = db_basic_set_freq, + .base.set_gain = db_basic_set_gain, + .base.set_tx_enable = db_basic_set_tx_enable, +}; + +struct db_basic db_lf_rx = { + .base.dbid = 0x000f, + .base.is_tx = false, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(32e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.is_quadrature = false, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.atr_mask = 0, + .base.atr_txval = 0, + .base.atr_rxval = 0, + //.base.atr_tx_delay = 0, + //.base.atr_rx_delay = 0, + + .base.init = db_basic_init, + .base.set_freq = db_basic_set_freq, + .base.set_gain = db_basic_set_gain, + .base.set_tx_enable = db_basic_set_tx_enable, +}; + + +bool +db_basic_init(struct db_base *db) +{ + return true; +} + +bool +db_basic_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc) +{ + *dc = 0; + return true; +} + +bool +db_basic_set_gain(struct db_base *db, u2_fxpt_gain_t gain) +{ + return true; +} + +bool +db_basic_set_tx_enable(struct db_base *db, bool on) +{ + return true; +} + diff --git a/firmware/microblaze/lib/db_dbsrx.c b/firmware/microblaze/lib/db_dbsrx.c new file mode 100644 index 000000000..2174a6cd8 --- /dev/null +++ b/firmware/microblaze/lib/db_dbsrx.c @@ -0,0 +1,395 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <i2c.h> +#include <db_base.h> +#include <lsdac.h> +#include <memory_map.h> +#include <clocks.h> +#include <stdio.h> +#include <hal_io.h> + +#define min(X,Y) ((X) < (Y) ? (X) : (Y)) +#define max(X,Y) ((X) > (Y) ? (X) : (Y)) +#define abs(X) ((X) < (0) ? ((-1)*(X)) : (X)) + +#define I2C_ADDR 0x67 +#define REFCLK_DIVISOR 25 // Gives a 4 MHz clock +#define REFCLK_FREQ U2_DOUBLE_TO_FXPT_FREQ(MASTER_CLK_RATE/REFCLK_DIVISOR) +#define REFCLK_FREQ_INT u2_fxpt_freq_round_to_int(REFCLK_FREQ) + +#define VMAXGAIN .75 +#define VMINGAIN 2.6 +#define RFGAINMAX 60 +#define BBGAINMAX 24 +#define DACFULLSCALE 3.3 + +bool db_dbsrx_init(struct db_base *db); +bool db_dbsrx_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc); +bool db_dbsrx_set_gain(struct db_base *db, u2_fxpt_gain_t gain); + +struct db_dbsrx_common { + int d_n; + int d_div2; + int d_osc; + int d_cp; + int d_r_reg; + int d_fdac; + int d_m; + int d_dl; + int d_ade; + int d_adl; + int d_gc2; + int d_diag; +}; + +struct db_dbsrx_dummy { + struct db_base base; + struct db_dbsrx_common common; +}; + +struct db_dbsrx { + struct db_base base; + struct db_dbsrx_common common; +}; + +struct db_dbsrx db_dbsrx = { + .base.dbid = 0x000d, + .base.is_tx = false, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(500e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(2.6e9), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(RFGAINMAX+BBGAINMAX), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(1), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = db_dbsrx_init, + .base.set_freq = db_dbsrx_set_freq, + .base.set_gain = db_dbsrx_set_gain, + .base.set_tx_enable = 0, + .base.atr_mask = 0x0000, + .base.atr_txval = 0, + .base.atr_rxval = 0, + //.base.atr_tx_delay = + //.base.atr_rx_delay = + .common.d_n = 950, + .common.d_div2 = 0, + .common.d_osc = 5, + .common.d_cp = 3, + .common.d_r_reg = 1, + .common.d_fdac = 127, + .common.d_m = 2, + .common.d_dl = 1, + .common.d_ade = 0, + .common.d_adl = 0, + .common.d_gc2 = 31, + .common.d_diag = 0, +}; + +bool +db_dbsrx_init(struct db_base *dbb){ + struct db_dbsrx_dummy *db = (struct db_dbsrx_dummy *) dbb; + db->base.set_gain(dbb, (db->base.gain_max + db->base.gain_min)/2); + clocks_enable_rx_dboard(true, REFCLK_DIVISOR); // Gives 4 MHz clock + + return true; +} + +/************************************************** + * Registers + **************************************************/ +static int +_read_adc (void){ + unsigned char readback[2]; + i2c_read(I2C_ADDR, readback, 2*sizeof(unsigned char)); + int adc_val = (readback[0] >> 2)&7; + //printf("READBACK[0] %d, [1] %d\n",readback[0],readback[1]); + //printf("ADC: %d\n",adc_val); + return adc_val; +} + +static void +_write_reg (int regno, int v){ + //regno is in [0,5], v is value to write to register""" + unsigned char args[2]; + args[0] = (unsigned char)regno; + args[1] = (unsigned char)v; + i2c_write(I2C_ADDR, args, 2*sizeof(unsigned char)); + //printf("Reg %d, Val %x\n",regno,v); +} + +static void _send_reg_0(struct db_dbsrx_dummy *db){ + _write_reg(0,(db->common.d_div2<<7) + (db->common.d_n>>8)); +} + +static void _send_reg_1(struct db_dbsrx_dummy *db){ + _write_reg(1,db->common.d_n & 255); +} + +static void _send_reg_2(struct db_dbsrx_dummy *db){ + _write_reg(2,db->common.d_osc + (db->common.d_cp<<3) + (db->common.d_r_reg<<5)); +} + +static void _send_reg_3(struct db_dbsrx_dummy *db){ + _write_reg(3,db->common.d_fdac); +} + +static void _send_reg_4(struct db_dbsrx_dummy *db){ + _write_reg(4,db->common.d_m + (db->common.d_dl<<5) + (db->common.d_ade<<6) + (db->common.d_adl<<7)); +} + +static void _send_reg_5(struct db_dbsrx_dummy *db){ + _write_reg(5,db->common.d_gc2 + (db->common.d_diag<<5)); +} + +/************************************************** + * Helpers for setting the freq + **************************************************/ +static void +_set_div2(struct db_dbsrx_dummy *db, int div2){ + db->common.d_div2 = div2; + _send_reg_0(db); +} + +// FIXME How do we handle ADE and ADL properly? +static void +_set_ade(struct db_dbsrx_dummy *db, int ade){ + db->common.d_ade = ade; + _send_reg_4(db); +} + +static void +_set_r(struct db_dbsrx_dummy *db, int r){ + db->common.d_r_reg = r; + _send_reg_2(db); +} + +static void +_set_n(struct db_dbsrx_dummy *db, int n){ + db->common.d_n = n; + _send_reg_0(db); + _send_reg_1(db); +} + +static void +_set_osc(struct db_dbsrx_dummy *db, int osc){ + db->common.d_osc = osc; + _send_reg_2(db); +} + +static void +_set_cp(struct db_dbsrx_dummy *db, int cp){ + db->common.d_cp = cp; + _send_reg_2(db); +} + +/************************************************** + * Set the freq + **************************************************/ + + +bool +db_dbsrx_set_freq(struct db_base *dbb, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc){ + struct db_dbsrx_dummy *db = (struct db_dbsrx_dummy *) dbb; + + if(!(freq>=db->base.freq_min && freq<=db->base.freq_max)) { + return false; + } + + u2_fxpt_freq_t vcofreq; + if(freq < U2_DOUBLE_TO_FXPT_FREQ(1150e6)) { + _set_div2(db, 0); + vcofreq = 4 * freq; + } + else { + _set_div2(db, 1); + vcofreq = 2 * freq; + } + + _set_ade(db, 1); + int rmin = max(2, u2_fxpt_freq_round_to_int(REFCLK_FREQ/2e6)); //TODO? remove max() + //int rmax = min(128, u2_fxpt_freq_round_to_int(REFCLK_FREQ/500e3)); //TODO? remove min() + int n = 0; + u2_fxpt_freq_t best_delta = U2_DOUBLE_TO_FXPT_FREQ(10e6); + u2_fxpt_freq_t delta; + + int r_reg = 0; + while ((r_reg<7) && ((2<<r_reg) < rmin)) { + r_reg++; + } + //printf ("r_reg = %d, r = %d\n",r_reg,2<<r_reg); + int best_r = r_reg; + int best_n = 0; + + while(r_reg <= 7) { + n = u2_fxpt_freq_round_to_int(freq/REFCLK_FREQ_INT*(2<<r_reg)); + //printf("LOOP: r_reg %d, best_r %d, best_n %d, best_delta %d\n", + //r_reg,best_r,best_n,u2_fxpt_freq_round_to_int(best_delta)); + + //printf("N: %d\n",n); + if(n<256) { + r_reg++; + continue; + } + delta = abs(n*REFCLK_FREQ/(2<<r_reg) - freq); + if(delta < best_delta) { + best_r = r_reg; + best_n = n; + best_delta = delta; + } + if(best_delta < U2_DOUBLE_TO_FXPT_FREQ(75e3)) { + break; + } + r_reg++; + } + + //printf("BEST R: %d Best Delta %d Best N %d\n", + // best_r,u2_fxpt_freq_round_to_int(best_delta),best_n); + _set_r(db, best_r); + _set_n(db, best_n); + + int vco; + if(vcofreq < U2_DOUBLE_TO_FXPT_FREQ(2433e6)) + vco = 0; + else if(vcofreq < U2_DOUBLE_TO_FXPT_FREQ(2711e6)) + vco=1; + else if(vcofreq < U2_DOUBLE_TO_FXPT_FREQ(3025e6)) + vco=2; + else if(vcofreq < U2_DOUBLE_TO_FXPT_FREQ(3341e6)) + vco=3; + else if(vcofreq < U2_DOUBLE_TO_FXPT_FREQ(3727e6)) + vco=4; + else if(vcofreq < U2_DOUBLE_TO_FXPT_FREQ(4143e6)) + vco=5; + else if(vcofreq < U2_DOUBLE_TO_FXPT_FREQ(4493e6)) + vco=6; + else + vco=7; + //printf("Initial VCO choice %d\n",vco); + _set_osc(db, vco); + + + int adc_val = 0; + while(adc_val == 0 || adc_val == 7) { + adc_val = _read_adc(); + //printf("adc %d\n",adc_val); + + if(adc_val == 0) { + if(vco <= 0) { + return false; + } + else { + vco = vco - 1; + } + } + else if(adc_val == 7) { + if(vco >= 7) { + return false; + } + else { + vco = vco + 1; + } + } + _set_osc(db, vco); + } + + if(adc_val == 1 || adc_val == 2) { + _set_cp(db, 1); + } + else if(adc_val == 3 || adc_val == 4) { + _set_cp(db, 2); + } + else { + _set_cp(db, 3); + } + //printf("Final VCO choice %d\n",vco); + + *dc = db->common.d_n * REFCLK_FREQ / (2<<db->common.d_r_reg); + return true; + +} + +/************************************************** + * Helpers for setting the gain + **************************************************/ + +static void +_set_gc2(struct db_dbsrx_dummy *db, int gc2){ + db->common.d_gc2 = gc2; + _send_reg_5(db); +} + +/************************************************** + * Set the gain + **************************************************/ +bool +db_dbsrx_set_gain(struct db_base *dbb, u2_fxpt_gain_t gain){ + struct db_dbsrx_dummy *db = (struct db_dbsrx_dummy *) dbb; + + u2_fxpt_gain_t rfgain, bbgain; + + if(!(gain >= db->base.gain_min && gain <= db->base.gain_max)) { + return false; + } + + if(gain < U2_DOUBLE_TO_FXPT_GAIN(RFGAINMAX)) { + rfgain = gain; + bbgain = 0; + } + else { + rfgain = U2_DOUBLE_TO_FXPT_GAIN(RFGAINMAX); + bbgain = gain - U2_DOUBLE_TO_FXPT_GAIN(RFGAINMAX); + } + + int rf_gain_slope_q8 = 256 * 4096 * (VMAXGAIN-VMINGAIN) / RFGAINMAX / DACFULLSCALE; + int rf_gain_offset_q8 = 128 * 256 * 4096 * VMINGAIN / DACFULLSCALE; + + int rfdac = (rfgain*rf_gain_slope_q8 + rf_gain_offset_q8)>>15; + + //printf("Set RF Gain %d, %d\n",rfgain,rfdac); + lsdac_write_rx(1,rfdac); + + // Set GC2 + int bb_gain_slope_q8 = 256*(0-31)/(BBGAINMAX-0); + + int gc2 = u2_fxpt_gain_round_to_int((bb_gain_slope_q8 * bbgain)>>8) + 31; + //printf("Set BB Gain: %d, gc2 %d\n",bbgain,gc2); + + _set_gc2(db, gc2); + + return true; +} + +/************************************************** + * Helpers for setting the bw + **************************************************/ +static void +_set_m(struct db_dbsrx_dummy *db, int m){ + db->common.d_m = m; + _send_reg_4(db); +} + +static void +_set_fdac(struct db_dbsrx_dummy *db, int fdac){ + db->common.d_fdac = fdac; + _send_reg_3(db); +} diff --git a/firmware/microblaze/lib/db_init.c b/firmware/microblaze/lib/db_init.c new file mode 100644 index 000000000..a0bfc5cfb --- /dev/null +++ b/firmware/microblaze/lib/db_init.c @@ -0,0 +1,428 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include <memory_map.h> +#include <i2c.h> +#include <usrp2_i2c_addr.h> +#include <string.h> +#include <stdio.h> +#include <db.h> +#include <db_base.h> +#include <hal_io.h> +#include <nonstdio.h> + + +struct db_base *tx_dboard; // the tx daughterboard that's installed +struct db_base *rx_dboard; // the rx daughterboard that's installed + +extern struct db_base db_basic_tx; +extern struct db_base db_basic_rx; +extern struct db_base db_lf_tx; +extern struct db_base db_lf_rx; +extern struct db_base db_rfx_400_tx; +extern struct db_base db_rfx_400_rx; +extern struct db_base db_rfx_900_tx; +extern struct db_base db_rfx_900_rx; +extern struct db_base db_rfx_1200_tx; +extern struct db_base db_rfx_1200_rx; +extern struct db_base db_rfx_1800_tx; +extern struct db_base db_rfx_1800_rx; +extern struct db_base db_rfx_2400_tx; +extern struct db_base db_rfx_2400_rx; +extern struct db_base db_tvrx1; +extern struct db_base db_tvrx2; +extern struct db_base db_tvrx3; +extern struct db_base db_dbsrx; + +extern struct db_base db_xcvr2450_tx; +extern struct db_base db_xcvr2450_rx; + +struct db_base *all_dboards[] = { + &db_basic_tx, + &db_basic_rx, + &db_lf_tx, + &db_lf_rx, + &db_rfx_400_tx, + &db_rfx_400_rx, + &db_rfx_900_tx, + &db_rfx_900_rx, + &db_rfx_1200_tx, + &db_rfx_1200_rx, + &db_rfx_1800_tx, + &db_rfx_1800_rx, + &db_rfx_2400_tx, + &db_rfx_2400_rx, + &db_tvrx1, +#if 0 + &db_tvrx2, +#endif + &db_tvrx3, + &db_dbsrx, + &db_xcvr2450_tx, + &db_xcvr2450_rx, + 0 +}; + + +typedef enum { UDBE_OK, UDBE_NO_EEPROM, UDBE_INVALID_EEPROM } usrp_dbeeprom_status_t; + +static usrp_dbeeprom_status_t +read_raw_dboard_eeprom (unsigned char *buf, int i2c_addr) +{ + if (!eeprom_read (i2c_addr, 0, buf, DB_EEPROM_CLEN)) + return UDBE_NO_EEPROM; + + if (buf[DB_EEPROM_MAGIC] != DB_EEPROM_MAGIC_VALUE) + return UDBE_INVALID_EEPROM; + + int sum = 0; + unsigned int i; + for (i = 0; i < DB_EEPROM_CLEN; i++) + sum += buf[i]; + + if ((sum & 0xff) != 0) + return UDBE_INVALID_EEPROM; + + return UDBE_OK; +} + + +/* + * Return DBID, -1 <none> or -2 <invalid eeprom contents> + */ +int +read_dboard_eeprom(int i2c_addr) +{ + unsigned char buf[DB_EEPROM_CLEN]; + + usrp_dbeeprom_status_t s = read_raw_dboard_eeprom (buf, i2c_addr); + + //printf("\nread_raw_dboard_eeprom: %d\n", s); + + switch (s){ + case UDBE_OK: + return (buf[DB_EEPROM_ID_MSB] << 8) | buf[DB_EEPROM_ID_LSB]; + + case UDBE_NO_EEPROM: + default: + return -1; + + case UDBE_INVALID_EEPROM: + return -2; + } +} + + +static struct db_base * +lookup_dbid(int dbid) +{ + if (dbid < 0) + return 0; + + int i; + for (i = 0; all_dboards[i]; i++) + if (all_dboards[i]->dbid == dbid) + return all_dboards[i]; + + return 0; +} + +static struct db_base * +lookup_dboard(int i2c_addr, struct db_base *default_db, char *msg) +{ + struct db_base *db; + int dbid = read_dboard_eeprom(i2c_addr); + + // FIXME removing this printf has the system hang if there are two d'boards + // installed. (I think the problem is in i2c_read/write or the way + // I kludge the zero-byte write to set the read address in eeprom_read.) + printf("%s dbid: 0x%x\n", msg, dbid); + + if (dbid < 0){ // there was some kind of problem. Treat as Basic Tx + return default_db; + } + else if ((db = lookup_dbid(dbid)) == 0){ + printf("No daugherboard code for dbid = 0x%x\n", dbid); + return default_db; + } + return db; +} + +void +set_atr_regs(int bank, struct db_base *db) +{ + uint32_t val[4]; + int shift; + int mask; + int i; + + val[ATR_IDLE] = db->atr_rxval; + val[ATR_RX] = db->atr_rxval; + val[ATR_TX] = db->atr_txval; + val[ATR_FULL] = db->atr_txval; + + if (bank == GPIO_TX_BANK){ + mask = 0xffff0000; + shift = 16; + } + else { + mask = 0x0000ffff; + shift = 0; + } + + for (i = 0; i < 4; i++){ + int t = (atr_regs->v[i] & ~mask) | ((val[i] << shift) & mask); + //printf("atr_regs[%d] = 0x%x\n", i, t); + atr_regs->v[i] = t; + } +} + +static void +set_gpio_mode(int bank, struct db_base *db) +{ + int i; + + hal_gpio_set_ddr(bank, db->output_enables, 0xffff); + set_atr_regs(bank, db); + + for (i = 0; i < 16; i++){ + if (db->used_pins & (1 << i)){ + // set to either GPIO_SEL_SW or GPIO_SEL_ATR + hal_gpio_set_sel(bank, i, (db->atr_mask & (1 << i)) ? 'a' : 's'); + } + } +} + +static int __attribute__((unused)) +determine_tx_mux_value(struct db_base *db) +{ + if (db->i_and_q_swapped) + return 0x01; + else + return 0x10; +} + +static int +determine_rx_mux_value(struct db_base *db) +{ +#define ADC0 0x0 +#define ADC1 0x1 +#define ZERO 0x2 + + static int truth_table[8] = { + /* swap_iq, uses */ + /* 0, 0x0 */ (ZERO << 2) | ZERO, // N/A + /* 0, 0x1 */ (ZERO << 2) | ADC0, + /* 0, 0x2 */ (ZERO << 2) | ADC1, + /* 0, 0x3 */ (ADC1 << 2) | ADC0, + /* 1, 0x0 */ (ZERO << 2) | ZERO, // N/A + /* 1, 0x1 */ (ZERO << 2) | ADC0, + /* 1, 0x2 */ (ZERO << 2) | ADC1, + /* 1, 0x3 */ (ADC0 << 2) | ADC1, + }; + + int subdev0_uses; + int subdev1_uses; + int uses; + + if (db->is_quadrature) + subdev0_uses = 0x3; // uses A/D 0 and 1 + else + subdev0_uses = 0x1; // uses A/D 0 only + + // FIXME second subdev on Basic Rx, LF RX + // if subdev2 exists + // subdev1_uses = 0x2; + subdev1_uses = 0; + + uses = subdev0_uses; + + int swap_iq = db->i_and_q_swapped & 0x1; + int index = (swap_iq << 2) | uses; + + return truth_table[index]; +} + + +void +db_init(void) +{ + int m; + + tx_dboard = lookup_dboard(I2C_ADDR_TX_A, &db_basic_tx, "Tx"); + //printf("db_init: tx dbid = 0x%x\n", tx_dboard->dbid); + set_gpio_mode(GPIO_TX_BANK, tx_dboard); + tx_dboard->init(tx_dboard); + m = determine_tx_mux_value(tx_dboard); + dsp_tx_regs->tx_mux = m; + //printf("tx_mux = 0x%x\n", m); + tx_dboard->current_lo_offset = tx_dboard->default_lo_offset; + + rx_dboard = lookup_dboard(I2C_ADDR_RX_A, &db_basic_rx, "Rx"); + //printf("db_init: rx dbid = 0x%x\n", rx_dboard->dbid); + set_gpio_mode(GPIO_RX_BANK, rx_dboard); + rx_dboard->init(rx_dboard); + m = determine_rx_mux_value(rx_dboard); + dsp_rx_regs->rx_mux = m; + //printf("rx_mux = 0x%x\n", m); + rx_dboard->current_lo_offset = rx_dboard->default_lo_offset; +} + +/*! + * Calculate the frequency to use for setting the digital down converter. + * + * \param[in] target_freq desired RF frequency (Hz) + * \param[in] baseband_freq the RF frequency that corresponds to DC in the IF. + * + * \param[out] dxc_freq is the value for the ddc + * \param[out] inverted is true if we're operating in an inverted Nyquist zone. +*/ +void +calc_dxc_freq(u2_fxpt_freq_t target_freq, u2_fxpt_freq_t baseband_freq, + u2_fxpt_freq_t *dxc_freq, bool *inverted) +{ + u2_fxpt_freq_t fs = U2_DOUBLE_TO_FXPT_FREQ(100e6); // converter sample rate + u2_fxpt_freq_t delta = target_freq - baseband_freq; + +#if 0 + printf("calc_dxc_freq\n"); + printf(" fs = "); print_fxpt_freq(fs); newline(); + printf(" target = "); print_fxpt_freq(target_freq); newline(); + printf(" baseband = "); print_fxpt_freq(baseband_freq); newline(); + printf(" delta = "); print_fxpt_freq(delta); newline(); +#endif + + if (delta >= 0){ + while (delta > fs) + delta -= fs; + if (delta <= fs/2){ // non-inverted region + *dxc_freq = -delta; + *inverted = false; + } + else { // inverted region + *dxc_freq = delta - fs; + *inverted = true; + } + } + else { + while (delta < -fs) + delta += fs; + if (delta >= -fs/2){ // non-inverted region + *dxc_freq = -delta; + *inverted = false; + } + else { // inverted region + *dxc_freq = delta + fs; + *inverted = true; + } + } +} + +bool +db_set_lo_offset(struct db_base *db, u2_fxpt_freq_t offset) +{ + db->current_lo_offset = offset; + return true; +} + +bool +db_tune(struct db_base *db, u2_fxpt_freq_t target_freq, struct tune_result *result) +{ + memset(result, 0, sizeof(*result)); + bool inverted = false; + u2_fxpt_freq_t dxc_freq; + u2_fxpt_freq_t actual_dxc_freq; + + // Ask the d'board to tune as closely as it can to target_freq+lo_offset + bool ok = db->set_freq(db, target_freq+db->current_lo_offset, &result->baseband_freq); + + // Calculate the DDC setting that will downconvert the baseband from the + // daughterboard to our target frequency. + calc_dxc_freq(target_freq, result->baseband_freq, &dxc_freq, &inverted); + + // If the spectrum is inverted, and the daughterboard doesn't do + // quadrature downconversion, we can fix the inversion by flipping the + // sign of the dxc_freq... (This only happens using the basic_rx board) + + if (db->spectrum_inverted) + inverted = !inverted; + + if (inverted && !db->is_quadrature){ + dxc_freq = -dxc_freq; + inverted = !inverted; + } + + if (db->is_tx){ + dxc_freq = -dxc_freq; // down conversion versus up conversion + ok &= db_set_duc_freq(dxc_freq, &actual_dxc_freq); + } + else { + ok &= db_set_ddc_freq(dxc_freq, &actual_dxc_freq); + } + + result->dxc_freq = dxc_freq; + result->residual_freq = dxc_freq - actual_dxc_freq; + result->inverted = inverted; + return ok; +} + +static int32_t +compute_freq_control_word(u2_fxpt_freq_t target_freq, u2_fxpt_freq_t *actual_freq) +{ + // If we were using floating point, we'd calculate + // master = 100e6; + // v = (int) rint(target_freq / master_freq) * pow(2.0, 32.0); + + //printf("compute_freq_control_word\n"); + //printf(" target_freq = "); print_fxpt_freq(target_freq); newline(); + + int32_t master_freq = 100000000; // 100M + + int32_t v = ((target_freq << 12)) / master_freq; + //printf(" fcw = %d\n", v); + + *actual_freq = (v * (int64_t) master_freq) >> 12; + + //printf(" actual = "); print_fxpt_freq(*actual_freq); newline(); + + return v; +} + + +bool +db_set_ddc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq) +{ + int32_t v = compute_freq_control_word(dxc_freq, actual_dxc_freq); + dsp_rx_regs->freq = v; + return true; +} + +bool +db_set_duc_freq(u2_fxpt_freq_t dxc_freq, u2_fxpt_freq_t *actual_dxc_freq) +{ + int32_t v = compute_freq_control_word(dxc_freq, actual_dxc_freq); + dsp_tx_regs->freq = v; + return true; +} + +bool +db_set_gain(struct db_base *db, u2_fxpt_gain_t gain) +{ + return db->set_gain(db, gain); +} diff --git a/firmware/microblaze/lib/db_rfx.c b/firmware/microblaze/lib/db_rfx.c new file mode 100644 index 000000000..ff12f9e32 --- /dev/null +++ b/firmware/microblaze/lib/db_rfx.c @@ -0,0 +1,590 @@ +/* + * Copyright 2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <spi.h> +#include <memory_map.h> +#include <db_base.h> +#include <hal_io.h> +#include <stdio.h> +#include <mdelay.h> +#include <lsdac.h> +#include <clocks.h> + + +bool rfx_init_rx(struct db_base *db); +bool rfx_init_tx(struct db_base *db); +bool rfx_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc); +bool rfx_set_gain_rx(struct db_base *db, u2_fxpt_gain_t gain); +bool rfx_set_gain_tx(struct db_base *db, u2_fxpt_gain_t gain); +bool rfx_set_tx_enable(struct db_base *, bool on); + +// Control Latch Defines +#define P 0 // Prescalar value for setting in regs, must match the next line... +#define PRESCALER 8 // Presacalar value for computations +#define PD 0 // Power down, 0 = normal operation +#define PL 0 // PLL power output +#define MTLD 1 // Mute till lock detect +#define CPGAIN 0 // Charge pump gain, use setting 1, also in N-reg +#define CP3S 0 // Charge pump tri-state, 0 = normal operation +#define PDP 1 // Phase detector polarity +#define MUXOUT 1 // Digital lock detect, active high +#define CR 0 // normal operation +#define PC 1 // core power + +// N Latch Defines +#define DIVSEL 0 // N Counter always operates on full rate +#define N_RSV 0 + +// R Latch Defines +#define R_RSV 0 +#define R_BSC 3 +#define R_TMB 0 +#define R_LDP 1 +#define R_ABP 0 +#define R_DIV 16 + +#define phdet_freq (U2_DOUBLE_TO_FXPT_FREQ(100e6/R_DIV)) + +// IO Pin functions +#define POWER_UP (1 << 7) // Low enables power supply +#define ANT_SW (1 << 6) // On TX DB, 0 = TX, 1 = RX, on RX DB 0 = main ant, 1 = RX2 +#define MIX_EN (1 << 5) // Enable appropriate mixer +#define LOCKDET_MASK (1 << 2) // Input pin + +struct db_rfx_common { + // RFX common stuff + unsigned char DIV2; + unsigned char CP1; + unsigned char CP2; + int freq_mult; + int spi_mask; +}; + +struct db_rfx_dummy { + struct db_base base; + struct db_rfx_common common; +}; + + +struct db_rfx_400_rx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_400_tx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_900_rx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_900_tx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_1200_rx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_1200_tx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_1800_rx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_1800_tx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_2400_rx { + struct db_base base; + struct db_rfx_common common; +}; + +struct db_rfx_2400_tx { + struct db_base base; + struct db_rfx_common common; +}; + + +/* + * The class instances + */ +struct db_rfx_400_rx db_rfx_400_rx = { + .base.dbid = 0x0024, + .base.is_tx = false, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(400e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(500e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(45), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0.022), + .base.is_quadrature = true, + .base.i_and_q_swapped = true, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = rfx_init_rx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_rx, + .base.set_tx_enable = 0, + .base.atr_mask = 0x00E0, + .base.atr_txval = POWER_UP, + .base.atr_rxval = POWER_UP|MIX_EN, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 0, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_RX_DB, + .common.freq_mult = 2 +}; + + +struct db_rfx_400_tx db_rfx_400_tx = { + .base.dbid = 0x0028, + .base.is_tx = true, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(400e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(500e6), + //.base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6), + .base.init = rfx_init_tx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_tx, + .base.set_tx_enable = rfx_set_tx_enable, + .base.atr_mask = 0x00E0, + .base.atr_txval = POWER_UP|MIX_EN, + .base.atr_rxval = POWER_UP|ANT_SW, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 1, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_TX_DB, + .common.freq_mult = 2 +}; + +struct db_rfx_900_rx db_rfx_900_rx = { + .base.dbid = 0x0025, + .base.is_tx = false, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(750e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(1050e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(70), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0.034), + .base.is_quadrature = true, + .base.i_and_q_swapped = true, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = rfx_init_rx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_rx, + .base.set_tx_enable = 0, + .base.atr_mask = 0x00E0, + .base.atr_txval = 0, + .base.atr_rxval = MIX_EN, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 1, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_RX_DB, + .common.freq_mult = 2 +}; + + +struct db_rfx_900_tx db_rfx_900_tx = { + .base.dbid = 0x0029, + .base.is_tx = true, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(750e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(1050e6), + //.base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6), + .base.init = rfx_init_tx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_tx, + .base.set_tx_enable = rfx_set_tx_enable, + .base.atr_mask = 0x00E0, + .base.atr_txval = MIX_EN, + .base.atr_rxval = ANT_SW, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 1, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_TX_DB, + .common.freq_mult = 2 +}; + +struct db_rfx_1200_rx db_rfx_1200_rx = { + .base.dbid = 0x0026, + .base.is_tx = false, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(1150e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(1450e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(70), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0.034), + .base.is_quadrature = true, + .base.i_and_q_swapped = true, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = rfx_init_rx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_rx, + .base.set_tx_enable = 0, + .base.atr_mask = 0x00E0, + .base.atr_txval = 0, + .base.atr_rxval = MIX_EN, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 1, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_RX_DB, + .common.freq_mult = 2 +}; + + +struct db_rfx_1200_tx db_rfx_1200_tx = { + .base.dbid = 0x002a, + .base.is_tx = true, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(1150e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(1450e6), + //.base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6), + .base.init = rfx_init_tx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_tx, + .base.set_tx_enable = rfx_set_tx_enable, + .base.atr_mask = 0x00E0, + .base.atr_txval = MIX_EN, + .base.atr_rxval = ANT_SW, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 1, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_TX_DB, + .common.freq_mult = 2 +}; + +struct db_rfx_1800_rx db_rfx_1800_rx = { + .base.dbid = 0x0034, + .base.is_tx = false, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(1500e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(2100e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(70), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0.034), + .base.is_quadrature = true, + .base.i_and_q_swapped = true, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = rfx_init_rx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_rx, + .base.set_tx_enable = 0, + .base.atr_mask = 0x00E0, + .base.atr_txval = 0, + .base.atr_rxval = MIX_EN, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 0, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_RX_DB, + .common.freq_mult = 1 +}; + + +struct db_rfx_1800_tx db_rfx_1800_tx = { + .base.dbid = 0x0035, + .base.is_tx = true, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(1500e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(2100e6), + //.base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6), + .base.init = rfx_init_tx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_tx, + .base.set_tx_enable = rfx_set_tx_enable, + .base.atr_mask = 0x00E0, + .base.atr_txval = MIX_EN, + .base.atr_rxval = ANT_SW, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 0, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_TX_DB, + .common.freq_mult = 1 +}; + + +struct db_rfx_2400_rx db_rfx_2400_rx = { + .base.dbid = 0x0027, + .base.is_tx = false, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(2300e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(2900e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(70), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(0.034), + .base.is_quadrature = true, + .base.i_and_q_swapped = true, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = rfx_init_rx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_rx, + .base.set_tx_enable = 0, + .base.atr_mask = 0x00E0, + .base.atr_txval = 0, + .base.atr_rxval = MIX_EN, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 0, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_RX_DB, + .common.freq_mult = 1 +}; + + +struct db_rfx_2400_tx db_rfx_2400_tx = { + .base.dbid = 0x002b, + .base.is_tx = true, + .base.output_enables = 0x00E0, + .base.used_pins = 0x00FF, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(2300e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(2900e6), + //.base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(xxx), + //.base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(xxx), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(12.5e6), + .base.init = rfx_init_tx, + .base.set_freq = rfx_set_freq, + .base.set_gain = rfx_set_gain_tx, + .base.set_tx_enable = rfx_set_tx_enable, + .base.atr_mask = 0x00E0, + .base.atr_txval = MIX_EN, + .base.atr_rxval = ANT_SW, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.DIV2 = 0, + .common.CP1 = 7, + .common.CP2 = 7, + .common.spi_mask = SPI_SS_TX_DB, + .common.freq_mult = 1 +}; + + +bool +rfx_init_tx(struct db_base *dbb) +{ + //struct db_rfx_dummy *db = (struct db_rfx_dummy *) dbb; + clocks_enable_tx_dboard(true, 0); + + // Set the freq now to get the one time 10ms delay out of the way. + u2_fxpt_freq_t dc; + dbb->set_freq(dbb, dbb->freq_min, &dc); + return true; +} + +bool +rfx_init_rx(struct db_base *dbb) +{ + //struct db_rfx_dummy *db = (struct db_rfx_dummy *) dbb; + clocks_enable_rx_dboard(true, 0); + + // test gain + dbb->set_gain(dbb,U2_DOUBLE_TO_FXPT_GAIN(45.0)); + + // Set the freq now to get the one time 10ms delay out of the way. + u2_fxpt_freq_t dc; + dbb->set_freq(dbb, dbb->freq_min, &dc); + + return true; +} + +bool +rfx_set_freq(struct db_base *dbb, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc) +{ + static unsigned char first = true; + + *dc = 0; + struct db_rfx_dummy *db = (struct db_rfx_dummy *) dbb; + u2_fxpt_freq_t desired_n = (U2_DOUBLE_TO_FXPT_FREQ(1.0)*db->common.freq_mult*freq)/phdet_freq; + int N_DIV = u2_fxpt_freq_round_to_int(desired_n); + int B = N_DIV/PRESCALER; + int A = N_DIV - PRESCALER*B; + + if(B<A) + return false; + + int R = (R_RSV<<22)|(R_BSC<<20)|(R_TMB<<19)|(R_LDP<<18)|(R_ABP<<16)|(R_DIV<<2)|1; + int N = (DIVSEL<<23)|(db->common.DIV2<<22)|(CPGAIN<<21)|(B<<8)|(N_RSV<<7)|(A<<2)|2; + int C = (P<<22)|(PD<<20)|(db->common.CP2<<17)|(db->common.CP1<<14)|(PL<<12)| + (MTLD<<11)|(CPGAIN<<10)|(CP3S<<9)|(PDP<<8)|(MUXOUT<<5)|(CR<<4)|(PC<<2)|0; + + spi_transact(SPI_TXONLY,db->common.spi_mask,R,24,SPIF_PUSH_FALL); + spi_transact(SPI_TXONLY,db->common.spi_mask,C,24,SPIF_PUSH_FALL); + if (first){ + first = false; + mdelay(10); + } + spi_transact(SPI_TXONLY,db->common.spi_mask,N,24,SPIF_PUSH_FALL); + + //printf("A = %d, B = %d, N_DIV = %d\n",A, B, N_DIV); + *dc = (N_DIV * phdet_freq) / db->common.freq_mult; + return true; +} + +bool +rfx_set_gain_tx(struct db_base *dbb, u2_fxpt_gain_t gain) +{ + // There is no analog gain control on TX + return true; +} + +bool +rfx_set_gain_rx(struct db_base *dbb, u2_fxpt_gain_t gain) +{ + struct db_rfx_dummy *db = (struct db_rfx_dummy *) dbb; + + int offset_q8 = (int)(1.2/3.3*4096*(1<<15)); + int range_q15 = (int)(-1.0*4096/3.3*256*128); + int slope_q8 = range_q15/db->base.gain_max; + + int dacword = ((slope_q8 * gain) + offset_q8)>>15; + //printf("DACWORD %d\n",dacword); + lsdac_write_rx(1,dacword); + return true; +} + + +bool +rfx_set_tx_enable(struct db_base *dbb, bool on) +{ + struct db_rfx_dummy *db = (struct db_rfx_dummy *) dbb; + + // FIXME + + return false; +} + +bool +rfx_lock_detect(struct db_base *dbb) +{ + struct db_rfx_dummy *db = (struct db_rfx_dummy *) dbb; + int pins; + pins = hal_gpio_read( db->base.is_tx ? GPIO_TX_BANK : GPIO_RX_BANK ); + if(pins & LOCKDET_MASK) + return true; + return false; +} + +/* + def select_rx_antenna(self, which_antenna): + """ + Specify which antenna port to use for reception. + @param which_antenna: either 'TX/RX' or 'RX2' + """ + if which_antenna in (0, 'TX/RX'): + self._u.write_io(self._which, 0, RX2_RX1N) + elif which_antenna in (1, 'RX2'): + self._u.write_io(self._which, RX2_RX1N, RX2_RX1N) + else: + raise ValueError, "which_antenna must be either 'TX/RX' or 'RX2'" + + def set_gain(self, gain): + """ + Set the gain. + + @param gain: gain in decibels + @returns True/False + """ + maxgain = self.gain_range()[1] - self._u.pga_max() + mingain = self.gain_range()[0] + if gain > maxgain: + pga_gain = gain-maxgain + assert pga_gain <= self._u.pga_max() + agc_gain = maxgain + else: + pga_gain = 0 + agc_gain = gain + V_maxgain = .2 + V_mingain = 1.2 + V_fullscale = 3.3 + dac_value = (agc_gain*(V_maxgain-V_mingain)/(maxgain-mingain) + V_mingain)*4096/V_fullscale + assert dac_value>=0 and dac_value<4096 + return self._u.write_aux_dac(self._which, 0, int(dac_value)) and \ + self._set_pga(int(pga_gain)) + + def gain_range(self): + return (self._u.pga_min(), self._u.pga_max() + 70, 0.05) -- For 900-2400 + return (self._u.pga_min(), self._u.pga_max() + 45, 0.035) -- For 400 + +*/ diff --git a/firmware/microblaze/lib/db_tvrx.c b/firmware/microblaze/lib/db_tvrx.c new file mode 100644 index 000000000..49bf75883 --- /dev/null +++ b/firmware/microblaze/lib/db_tvrx.c @@ -0,0 +1,244 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <i2c.h> +#include <lsdac.h> +#include <memory_map.h> +#include <db_base.h> +#include <hal_io.h> +#include <stdio.h> + +bool tvrx_init(struct db_base *db); +bool tvrx_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc); +bool tvrx_set_gain(struct db_base *db, u2_fxpt_gain_t gain); + +#define I2C_ADDR 0x60 +#define REF_FREQ (U2_DOUBLE_TO_FXPT_FREQ(4e6)/640*8) + +#define ref_div 640 /* choices are 640, 512, 1024 */ + +#if (ref_div == 640) +#define ref_div_byte 0 +#else +#if (ref_div == 512) +#define ref_div_byte 0x6 +#else +#define ref_div_byte 0x2 +#endif +#endif + +#define fast_tuning 0x40 + +#define control_byte_1 (0x88|fast_tuning|ref_div_byte) + + +struct db_tvrx_common { + // TVRX common stuff + u2_fxpt_freq_t first_if; + u2_fxpt_freq_t second_if; +}; + +struct db_tvrx_dummy { + struct db_base base; + struct db_tvrx_common common; +}; + +struct db_tvrx1 { + struct db_base base; + struct db_tvrx_common common; +}; + +struct db_tvrx2 { + struct db_base base; + struct db_tvrx_common common; +}; + +struct db_tvrx3 { + struct db_base base; + struct db_tvrx_common common; +}; + +/* The class instances */ +struct db_tvrx1 db_tvrx1 = { + .base.dbid = 0x0003, + .base.is_tx = false, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(50e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(860e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(95), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(1), + .base.is_quadrature = false, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = tvrx_init, + .base.set_freq = tvrx_set_freq, + .base.set_gain = tvrx_set_gain, + .base.set_tx_enable = 0, + .base.atr_mask = 0x0000, + .base.atr_txval = 0, + .base.atr_rxval = 0, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.first_if = U2_DOUBLE_TO_FXPT_FREQ(43.75e6), + .common.second_if = U2_DOUBLE_TO_FXPT_FREQ(5.75e6), +}; + +#if 0 +struct db_tvrx2 db_tvrx2 = { + .base.dbid = 0x000c, + .base.is_tx = false, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(50e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(860e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(95), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(1), + .base.is_quadrature = false, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = tvrx_init, + .base.set_freq = tvrx_set_freq, + .base.set_gain = tvrx_set_gain, + .base.set_tx_enable = 0, + .base.atr_mask = 0x0000, + .base.atr_txval = 0, + .base.atr_rxval = 0, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.first_if = U2_DOUBLE_TO_FXPT_FREQ(44e6), + .common.second_if = U2_DOUBLE_TO_FXPT_FREQ(56e6), // Fs - 44e6 +}; +#endif + +struct db_tvrx3 db_tvrx3 = { + .base.dbid = 0x0040, + .base.is_tx = false, + .base.output_enables = 0x0000, + .base.used_pins = 0x0000, + .base.freq_min = U2_DOUBLE_TO_FXPT_FREQ(50e6), + .base.freq_max = U2_DOUBLE_TO_FXPT_FREQ(860e6), + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(95), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(1), + .base.is_quadrature = false, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = tvrx_init, + .base.set_freq = tvrx_set_freq, + .base.set_gain = tvrx_set_gain, + .base.set_tx_enable = 0, + .base.atr_mask = 0x0000, + .base.atr_txval = 0, + .base.atr_rxval = 0, + // .base.atr_tx_delay = + // .base.atr_rx_delay = + .common.first_if = U2_DOUBLE_TO_FXPT_FREQ(44e6), + .common.second_if = U2_DOUBLE_TO_FXPT_FREQ(56e6), // Fs - 44e6 +}; + +bool +tvrx_init(struct db_base *dbb) +{ + struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb; + db->base.set_gain(dbb,U2_DOUBLE_TO_FXPT_GAIN(94.0)); + return true; +} + +bool +tvrx_set_freq(struct db_base *dbb, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc) +{ + *dc = 0; + if (freq < dbb->freq_min || freq > dbb->freq_max) + return false; + + struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb; + + u2_fxpt_freq_t target_lo_freq = freq + db->common.first_if; + int n_div = u2_fxpt_freq_round_to_int(((1LL<<20) * target_lo_freq)/REF_FREQ); + + u2_fxpt_freq_t actual_lo_freq = REF_FREQ * n_div; + u2_fxpt_freq_t actual_freq = actual_lo_freq - db->common.first_if; + if(n_div > 32767) + return false; + + if (0) + printf("n_div = %d, actual_freq = %d, actual_lo_freq = %d\n", + n_div, u2_fxpt_freq_round_to_int(actual_freq), + u2_fxpt_freq_round_to_int(actual_lo_freq)); + + unsigned char buf[4]; + buf[0] = (n_div>>8) & 0xff; + buf[1] = n_div & 0xff; + buf[2] = control_byte_1; + buf[3] = ((actual_freq < U2_DOUBLE_TO_FXPT_FREQ(158e6)) ? 0xa8 : // VHF LOW + (actual_freq < U2_DOUBLE_TO_FXPT_FREQ(464e6)) ? 0x98 : // VHF HIGH + 0x38); // UHF + + *dc = actual_freq - db->common.second_if; + return i2c_write(I2C_ADDR,buf,4); +} + +bool +tvrx_set_gain(struct db_base *dbb, u2_fxpt_gain_t gain) +{ + //struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb; + int rfgain; + int ifgain; + if(gain>U2_DOUBLE_TO_FXPT_GAIN(95.0)) + return false; + if(gain<0) + return false; + + if(gain>U2_DOUBLE_TO_FXPT_GAIN(60.0)) { + rfgain = U2_DOUBLE_TO_FXPT_GAIN(60.0); + ifgain = gain-U2_DOUBLE_TO_FXPT_GAIN(60.0); + } else { + rfgain = gain; + ifgain = 0; + } + + int rf_slope_q8 = 256 * 4096 * 2.5 / 60.0 / 1.22 / 3.3; + int rf_offset_q8 = 128 * 256 * 4096 * 1.25 / 1.22 / 3.3; + int if_slope_q8 = 256 * 4096 * 2.25 / 35.0 / 1.22 / 3.3; + int if_offset_q8 = 128 * 256 * 4096 * 1.4 / 1.22 / 3.3; + + + int rfdac = (rfgain*rf_slope_q8 + rf_offset_q8)>>15; + int ifdac = (ifgain*if_slope_q8 + if_offset_q8)>>15; + lsdac_write_rx(0,rfdac); + lsdac_write_rx(1,ifdac); + + if (0) + printf("Setting gain %d, rf %d, if %d\n",gain,rfdac,ifdac); + + return true; +} + + +bool +tvrx_lock_detect(struct db_base *dbb) +{ + // struct db_tvrx_dummy *db = (struct db_tvrx_dummy *) dbb; + return true; +} diff --git a/firmware/microblaze/lib/db_xcvr2450.c b/firmware/microblaze/lib/db_xcvr2450.c new file mode 100644 index 000000000..d7ab728e7 --- /dev/null +++ b/firmware/microblaze/lib/db_xcvr2450.c @@ -0,0 +1,496 @@ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <memory_map.h> +#include <db_base.h> +#include <stdio.h> +#include <spi.h> +#include <hal_io.h> +#include <clocks.h> +#include <mdelay.h> + +void set_atr_regs(int bank, struct db_base *db); //FIXME I need to be in a header + +// RX IO Pins +#define LOCKDET (1 << 15) // This is an INPUT!!! +#define EN (1 << 14) +#define RX_EN (1 << 13) // 1 = RX on, 0 = RX off +#define RX_HP (1 << 12) +#define B1 (1 << 11) +#define B2 (1 << 10) +#define B3 (1 << 9) +#define B4 (1 << 8) +#define B5 (1 << 7) +#define B6 (1 << 6) +#define B7 (1 << 5) +#define RX_OE_MASK EN|RX_EN|RX_HP|B1|B2|B3|B4|B5|B6|B7 +#define RX_SAFE_IO EN +#define RX_ATR_MASK EN|RX_EN|RX_HP + +// TX IO Pins +#define HB_PA_OFF (1 << 15) // 5GHz PA, 1 = off, 0 = on +#define LB_PA_OFF (1 << 14) // 2.4GHz PA, 1 = off, 0 = on +#define ANTSEL_TX1_RX2 (1 << 13) // 1 = Ant 1 to TX, Ant 2 to RX +#define ANTSEL_TX2_RX1 (1 << 12) // 1 = Ant 2 to TX, Ant 1 to RX +#define TX_EN (1 << 11) // 1 = TX on, 0 = TX off +#define AD9515DIV (1 << 4) // 1 = Div by 3, 0 = Div by 2 +#define TX_OE_MASK HB_PA_OFF|LB_PA_OFF|ANTSEL_TX1_RX2|ANTSEL_TX2_RX1|TX_EN|AD9515DIV +#define TX_SAFE_IO HB_PA_OFF|LB_PA_OFF|ANTSEL_TX1_RX2|AD9515DIV +#define TX_ATR_MASK HB_PA_OFF|LB_PA_OFF|ANTSEL_TX1_RX2|ANTSEL_TX2_RX1|TX_EN|AD9515DIV + +#define LB_FREQ_MIN U2_DOUBLE_TO_FXPT_FREQ(2.3e9) +#define LB_FREQ_MAX U2_DOUBLE_TO_FXPT_FREQ(2.6e9) +#define HB_FREQ_MIN U2_DOUBLE_TO_FXPT_FREQ(4.8e9) +#define HB_FREQ_MAX U2_DOUBLE_TO_FXPT_FREQ(6.1e9) +#define MASTER_REF_CLK_DIV 1 +#define N_DIV_MIN_Q16 (131 << 16) + +bool xcvr2450_init(struct db_base *db); +bool xcvr2450_set_freq(struct db_base *db, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc); +bool xcvr2450_set_gain_rx(struct db_base *db, u2_fxpt_gain_t gain); +bool xcvr2450_set_gain_tx(struct db_base *db, u2_fxpt_gain_t gain); +bool xcvr2450_set_tx_enable(struct db_base *db, bool on); + +struct db_xcvr2450_common { + int d_mimo, d_int_div, d_frac_div, d_highband, d_five_gig; + int d_cp_current, d_ref_div, d_rssi_hbw; + int d_txlpf_bw, d_rxlpf_bw, d_rxlpf_fine, d_rxvga_ser; + int d_rssi_range, d_rssi_mode, d_rssi_mux; + int d_rx_hp_pin, d_rx_hpf, d_rx_ant; + int d_tx_ant, d_txvga_ser, d_tx_driver_lin; + int d_tx_vga_lin, d_tx_upconv_lin, d_tx_bb_gain; + int d_pabias_delay, d_pabias; + int d_rx_rf_gain, d_rx_bb_gain, d_txgain; + int d_ad9515_div; + int d_tx_enb; +}; + +struct db_xcvr2450_dummy { + struct db_base base; + struct db_xcvr2450_common *common; +}; + +struct db_xcvr2450_rx { + struct db_base base; + struct db_xcvr2450_common *common; +}; + +struct db_xcvr2450_tx { + struct db_base base; + struct db_xcvr2450_common *common; +}; + +/* + * shared common between rx and tx db + */ +struct db_xcvr2450_common db_xcvr2450_common = { + /* set sane defaults */ + .d_mimo = 1, // 0 = OFF, 1 = ON + .d_int_div = 192, // 128 = min, 255 = max + .d_frac_div = 0, // 0 = min, 65535 = max + .d_highband = 0, // 0 = freq <= 5.4e9, 1 = freq > 5.4e9 + .d_five_gig = 0, // 0 = freq <= 3.e9, 1 = freq > 3e9 + .d_cp_current = 0, // 0 = 2mA, 1 = 4mA + .d_ref_div = 1, // 1 to 7 + .d_rssi_hbw = 0, // 0 = 2 MHz, 1 = 6 MHz + .d_txlpf_bw = 1, // 1 = 12 MHz, 2 = 18 MHz, 3 = 24 MHz + .d_rxlpf_bw = 1, // 0 = 7.5 MHz, 1 = 9.5 MHz, 2 = 14 MHz, 3 = 18 MHz + .d_rxlpf_fine = 2, // 0 = 90%, 1 = 95%, 2 = 100%, 3 = 105%, 4 = 110% + .d_rxvga_ser = 1, // 0 = RXVGA controlled by B7:1, 1=controlled serially + .d_rssi_range = 1, // 0 = low range (datasheet typo), 1=high range (0.5V - 2.0V) + .d_rssi_mode = 1, // 0 = enable follows RXHP, 1 = enabled + .d_rssi_mux = 0, // 0 = RSSI, 1 = TEMP + .d_rx_hp_pin = 0, // 0 = Fc set by rx_hpf, 1 = 600 KHz + .d_rx_hpf = 0, // 0 = 100Hz, 1 = 30KHz + .d_rx_ant = 0, // 0 = Ant. #1, 1 = Ant. #2 + .d_tx_ant = 0, // 0 = Ant. #1, 1 = Ant. #2 + .d_txvga_ser = 1, // 0 = TXVGA controlled by B6:1, 1=controlled serially + .d_tx_driver_lin = 2, // 0=50% (worst linearity), 1=63%, 2=78%, 3=100% (best lin) + .d_tx_vga_lin = 2, // 0=50% (worst linearity), 1=63%, 2=78%, 3=100% (best lin) + .d_tx_upconv_lin = 2, // 0=50% (worst linearity), 1=63%, 2=78%, 3=100% (best lin) + .d_tx_bb_gain = 3, // 0=maxgain-5dB, 1=max-3dB, 2=max-1.5dB, 3=max + .d_pabias_delay = 15, // 0 = 0, 15 = 7uS + .d_pabias = 0, // 0 = 0 uA, 63 = 315uA + .d_rx_rf_gain = 0, // 0 = 0dB, 1 = 0dB, 2 = 15dB, 3 = 30dB + .d_rx_bb_gain = 16, // 0 = min, 31 = max (0 - 62 dB) + .d_txgain = 63, // 0 = min, 63 = max + .d_tx_enb = 1, // 0 = disabled, 1 = enabled +}; + +/* + * The class instances + */ +struct db_xcvr2450_rx db_xcvr2450_rx = { + .base.dbid = 0x0061, + .base.is_tx = false, + .base.output_enables = RX_OE_MASK, + .base.used_pins = 0xFFFF, + .base.freq_min = LB_FREQ_MIN, + .base.freq_max = HB_FREQ_MAX, + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(92), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(1), + .base.is_quadrature = true, + .base.i_and_q_swapped = false, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = xcvr2450_init, + .base.set_freq = xcvr2450_set_freq, + .base.set_gain = xcvr2450_set_gain_rx, + .base.atr_mask = RX_ATR_MASK, + .base.atr_txval = 0x0, + .base.atr_rxval = 0x0, + .common = &db_xcvr2450_common, +}; + +struct db_xcvr2450_tx db_xcvr2450_tx = { + .base.dbid = 0x0060, + .base.is_tx = true, + .base.output_enables = TX_OE_MASK, + .base.used_pins = 0xFFFF, + .base.freq_min = LB_FREQ_MIN, + .base.freq_max = HB_FREQ_MAX, + .base.gain_min = U2_DOUBLE_TO_FXPT_GAIN(0), + .base.gain_max = U2_DOUBLE_TO_FXPT_GAIN(30), + .base.gain_step_size = U2_DOUBLE_TO_FXPT_GAIN(30.0/63.0), + .base.is_quadrature = true, + .base.i_and_q_swapped = true, + .base.spectrum_inverted = false, + .base.default_lo_offset = U2_DOUBLE_TO_FXPT_FREQ(0), + .base.init = xcvr2450_init, + .base.set_freq = xcvr2450_set_freq, + .base.set_gain = xcvr2450_set_gain_tx, + .base.set_tx_enable = xcvr2450_set_tx_enable, + .base.atr_mask = TX_ATR_MASK, + .base.atr_txval = 0x0, + .base.atr_rxval = 0x0, + .common = &db_xcvr2450_common, +}; + +/************************************************** + * Set Registers + **************************************************/ +static void +send_reg(int v){ + // Send 24 bits, it keeps last 18 clocked in + spi_transact(SPI_TXONLY,SPI_SS_RX_DB,v,24,SPIF_PUSH_FALL); + //printf("xcvr2450: Setting reg %d to %x\n", (v&15), v); +} + +static void +set_reg_standby(struct db_xcvr2450_dummy *db){ + int reg_standby = ( + (db->common->d_mimo<<17) | + (1<<16) | + (1<<6) | + (1<<5) | + (1<<4) | 2); + send_reg(reg_standby); +} + +static void +set_reg_int_divider(struct db_xcvr2450_dummy *db){ + int reg_int_divider = (( + (db->common->d_frac_div & 0x03)<<16) | + (db->common->d_int_div<<4) | 3); + send_reg(reg_int_divider); +} + +static void +set_reg_frac_divider(struct db_xcvr2450_dummy *db){ + int reg_frac_divider = ((db->common->d_frac_div & 0xfffc)<<2) | 4; + send_reg(reg_frac_divider); +} + +static void +set_reg_bandselpll(struct db_xcvr2450_dummy *db){ + int reg_bandselpll = ((db->common->d_mimo<<17) | + (1<<16) | + (1<<15) | + (0<<11) | //this bit gets toggled + (db->common->d_highband<<10) | + (db->common->d_cp_current<<9) | + (db->common->d_ref_div<<5) | + (db->common->d_five_gig<<4) | 5); + send_reg(reg_bandselpll); + reg_bandselpll = ((db->common->d_mimo<<17) | + (1<<16) | + (1<<15) | + (1<<11) | + (db->common->d_highband<<10) | + (db->common->d_cp_current<<9) | + (db->common->d_ref_div<<5) | + (db->common->d_five_gig<<4) | 5); + send_reg(reg_bandselpll); +} + +static void +set_reg_cal(struct db_xcvr2450_dummy *db){ + // FIXME do calibration + int reg_cal = ( + (1<<14) | 6); + send_reg(reg_cal); +} + +static void +set_reg_lpf(struct db_xcvr2450_dummy *db){ + int reg_lpf = ( + (db->common->d_rssi_hbw<<15) | + (db->common->d_txlpf_bw<<9) | + (db->common->d_rxlpf_bw<<7) | + (db->common->d_rxlpf_fine<<4) | 7); + send_reg(reg_lpf); +} + +static void +set_reg_rxrssi_ctrl(struct db_xcvr2450_dummy *db){ + int reg_rxrssi_ctrl = ( + (db->common->d_rxvga_ser<<16) | + (db->common->d_rssi_range<<15) | + (db->common->d_rssi_mode<<14) | + (db->common->d_rssi_mux<<12) | + (1<<9) | + (db->common->d_rx_hpf<<6) | + (1<<4) | 8); + send_reg(reg_rxrssi_ctrl); +} + +static void +set_reg_txlin_gain(struct db_xcvr2450_dummy *db){ + int reg_txlin_gain = ( + (db->common->d_txvga_ser<<14) | + (db->common->d_tx_driver_lin<<12) | + (db->common->d_tx_vga_lin<<10) | + (db->common->d_tx_upconv_lin<<6) | + (db->common->d_tx_bb_gain<<4) | 9); + send_reg(reg_txlin_gain); +} + +static void +set_reg_pabias(struct db_xcvr2450_dummy *db){ + int reg_pabias = ( + (db->common->d_pabias_delay<<10) | + (db->common->d_pabias<<4) | 10); + send_reg(reg_pabias); +} + +static void +set_reg_rxgain(struct db_xcvr2450_dummy *db){ + int reg_rxgain = ( + (db->common->d_rx_rf_gain<<9) | + (db->common->d_rx_bb_gain<<4) | 11); + send_reg(reg_rxgain); +} + +static void +set_reg_txgain(struct db_xcvr2450_dummy *db){ + int reg_txgain = ( + (db->common->d_txgain<<4) | 12); + send_reg(reg_txgain); +} + +/************************************************** + * GPIO + **************************************************/ +static void +set_gpio(struct db_xcvr2450_dummy *db){ + //set tx/rx gpio pins for auto tr + int tx_enb_sel = (db->common->d_tx_enb)? TX_EN:0; + int ad9515_sel = (db->common->d_ad9515_div == 3)? AD9515DIV:0; + int rx_hp = (db->common->d_rx_hp_pin)? RX_HP:0; + int tx_antsel = (db->common->d_tx_ant)? ANTSEL_TX2_RX1:ANTSEL_TX1_RX2; + int rx_antsel = (db->common->d_rx_ant)? ANTSEL_TX2_RX1:ANTSEL_TX1_RX2; + int tx_pa_sel = (db->common->d_five_gig)? LB_PA_OFF:HB_PA_OFF; + + /* FIXME better way to set rx and tx val for RX and TX banks */ + /* set rx bank */ + db->base.atr_rxval = EN|rx_hp|RX_EN; + db->base.atr_txval = EN|rx_hp; + set_atr_regs(GPIO_RX_BANK, (struct db_base *)db); + /* set tx bank */ + db->base.atr_rxval = HB_PA_OFF|LB_PA_OFF|rx_antsel|ad9515_sel; + db->base.atr_txval = tx_pa_sel|tx_antsel|tx_enb_sel|ad9515_sel; + set_atr_regs(GPIO_TX_BANK, (struct db_base *)db); +} + +/************************************************** + * Init for TX and RX + **************************************************/ +bool +xcvr2450_init(struct db_base *dbb){ + struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb; + /* Initialize chipset */ + clocks_enable_tx_dboard(true, MASTER_REF_CLK_DIV); + set_gpio(db); + set_reg_standby(db); + set_reg_bandselpll(db); + set_reg_cal(db); + set_reg_lpf(db); + set_reg_rxrssi_ctrl(db); + set_reg_txlin_gain(db); + set_reg_pabias(db); + set_reg_rxgain(db); + set_reg_txgain(db); + //u2_fxpt_freq_t dc; + //db->base.set_freq(dbb, U2_DOUBLE_TO_FXPT_FREQ(2.434e9), &dc); + return true; +} + +/************************************************** + * Lock detect + **************************************************/ +static bool +lock_detect(){ + //true when the VCO/PLL lock detect bit is set. + if(hal_gpio_read(GPIO_RX_BANK) & LOCKDET) { + return true; + } + else { // Give it a second chance + mdelay(1); + if(hal_gpio_read(GPIO_RX_BANK) & LOCKDET) + return true; + else + return false; + } +} + +/************************************************** + * Set the freq + **************************************************/ +bool +xcvr2450_set_freq(struct db_base *dbb, u2_fxpt_freq_t freq, u2_fxpt_freq_t *dc){ + unsigned int scaler, div_factor, actual_div_q16; + struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb; + /* determine if the freq range is in low or high band */ + if (freq >= LB_FREQ_MIN && freq <= LB_FREQ_MAX) { + db->common->d_five_gig = 0; + scaler = 3; + //printf("2.4-GHZ\n"); + } else if (freq >= HB_FREQ_MIN && freq <= HB_FREQ_MAX) { + db->common->d_five_gig = 1; + scaler = 5; + //printf("5-GHZ\n"); + } else { + printf("Out of range\n"); + return false; + } + /* set the highband bit */ + if(freq > U2_DOUBLE_TO_FXPT_FREQ(5.408e9)) { + db->common->d_highband = 1; + //printf("5-HB\n"); + } + else { + db->common->d_highband = 0; + //printf("5-LB\n"); + } + unsigned int loop_iter = 0; + do { /* set the dividers so that the n divider is above the practical minimum */ + switch(loop_iter){ + case 0: + db->common->d_ad9515_div = 3; + db->common->d_ref_div = 1; + break; + case 1: + db->common->d_ad9515_div = 2; + db->common->d_ref_div = 2; + break; + default: + db->common->d_ad9515_div = 3; + db->common->d_ref_div = loop_iter; + } + loop_iter++; + div_factor = db->common->d_ref_div*db->common->d_ad9515_div*4*MASTER_REF_CLK_DIV; + actual_div_q16 = ((freq*div_factor)/(scaler*MASTER_CLK_RATE)) >> (U2_FPF_RP-16); + } while (actual_div_q16 < N_DIV_MIN_Q16); + /* calculate the divisors */ + db->common->d_int_div = actual_div_q16 >> 16; + db->common->d_frac_div = actual_div_q16 & 0xffff; //isolate lower 16 bits + /* calculate the dc freq */ + *dc = ((((u2_fxpt_freq_t)MASTER_CLK_RATE)*actual_div_q16*scaler) / div_factor) << (U2_FPF_RP-16); + /*printf("scaler %d, div(int) %u, div_factor %d, ad9515_div %u, ref_div %u\n", + scaler, db->common->d_int_div, div_factor, db->common->d_ad9515_div, db->common->d_ref_div); + printf("actual div %u, Target Freq %uKHz, Actual Freq %uKHz\n", + actual_div_q16, u2_fxpt_freq_round_to_int(freq/1000), u2_fxpt_freq_round_to_int(*dc/1000)); + */ + set_gpio(db); + set_reg_int_divider(db); + set_reg_frac_divider(db); + set_reg_bandselpll(db); + + bool ok = lock_detect(); + if(!ok){ + //printf("Fail lock detect %uKHz\n", u2_fxpt_freq_round_to_int(freq/1000)); + } + return ok; +} + +/************************************************** + * Set RX Gain + **************************************************/ +bool +xcvr2450_set_gain_rx(struct db_base *dbb, u2_fxpt_gain_t gain){ + struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb; + //ensure gain is within range + if(!(gain >= db->base.gain_min && gain <= db->base.gain_max)) { + return false; + } + // Split the gain between RF and baseband + // This is experimental, not prescribed + if(gain < U2_DOUBLE_TO_FXPT_GAIN(30.0)) { + db->common->d_rx_rf_gain = 0; // 0 dB RF gain + db->common->d_rx_bb_gain = u2_fxpt_gain_round_to_int(gain/2); + } + else if(gain >= U2_DOUBLE_TO_FXPT_GAIN(30.0) && gain < U2_DOUBLE_TO_FXPT_GAIN(61.0)) { + db->common->d_rx_rf_gain = 2; // 15 dB RF gain + db->common->d_rx_bb_gain = u2_fxpt_gain_round_to_int((gain-U2_DOUBLE_TO_FXPT_GAIN(15.0))/2); + } + else if(gain >= U2_DOUBLE_TO_FXPT_GAIN(61.0)) { + db->common->d_rx_rf_gain = 3; // 30.5 dB RF gain + db->common->d_rx_bb_gain = u2_fxpt_gain_round_to_int((gain-U2_DOUBLE_TO_FXPT_GAIN(30.5))/2); + } + //printf("RX RF Gain %u, RX BB Gain %u\n", db->common->d_rx_rf_gain, db->common->d_rx_bb_gain); + set_reg_rxgain(db); + return true; +} + +/************************************************** + * Set TX Gain + **************************************************/ +bool +xcvr2450_set_gain_tx(struct db_base *dbb, u2_fxpt_gain_t gain){ + struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb; + //ensure gain in within range + if(!(gain >= db->base.gain_min && gain <= db->base.gain_max)) { + return false; + } + //scale for register and set + db->common->d_txgain = (gain*63)/db->base.gain_max; + //printf("TX Gain %u, TX Reg %u\n", u2_fxpt_gain_round_to_int(gain), db->common->d_txgain); + set_reg_txgain(db); + return true; +} + +/************************************************** + * Set TX Enable + **************************************************/ +bool +xcvr2450_set_tx_enable(struct db_base *dbb, bool on){ + struct db_xcvr2450_dummy *db = (struct db_xcvr2450_dummy *) dbb; + db->common->d_tx_enb = on; + set_gpio(db); + return true; +} diff --git a/firmware/microblaze/lib/dbsm.c b/firmware/microblaze/lib/dbsm.c new file mode 100644 index 000000000..9d66ec39c --- /dev/null +++ b/firmware/microblaze/lib/dbsm.c @@ -0,0 +1,297 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * Double Buffering State Machine + */ + +#include "dbsm.h" +#include "memory_map.h" +#include "buffer_pool.h" +#include <stdbool.h> +#include "nonstdio.h" +#include <stdlib.h> + +typedef enum { + BS_EMPTY, + BS_FILLING, + BS_FULL, + BS_EMPTYING, +} buffer_state_t; + +static buffer_state_t buffer_state[NBUFFERS]; + +bool +dbsm_nop_inspector(dbsm_t *sm, int buf_this) +{ + return false; +} + +void +dbsm_init(dbsm_t *sm, int buf0, + const buf_cmd_args_t *recv, const buf_cmd_args_t *send, + inspector_t inspect) +{ + if (buf0 & 0x1) // must be even + abort(); + + sm->buf0 = buf0; + sm->running = false; + sm->recv_args = *recv; + sm->send_args = *send; + + sm->rx_idle = true; + sm->tx_idle = true; + + sm->inspect = inspect; + + // How much to adjust the last_line register. + // It's 1 for everything but the ethernet. + //sm->last_line_adj = recv->port == PORT_ETH ? 3 : 1; + sm->last_line_adj = 1; + + buffer_state[sm->buf0] = BS_EMPTY; + buffer_state[sm->buf0 ^ 1] = BS_EMPTY; + + sm->precomputed_receive_to_buf_ctrl_word[0] = + (BPC_READ + | BPC_BUFFER(sm->buf0) + | BPC_PORT(sm->recv_args.port) + | BPC_STEP(1) + | BPC_FIRST_LINE(sm->recv_args.first_line) + | BPC_LAST_LINE(sm->recv_args.last_line)); + + sm->precomputed_receive_to_buf_ctrl_word[1] = + (BPC_READ + | BPC_BUFFER(sm->buf0 ^ 1) + | BPC_PORT(sm->recv_args.port) + | BPC_STEP(1) + | BPC_FIRST_LINE(sm->recv_args.first_line) + | BPC_LAST_LINE(sm->recv_args.last_line)); + + sm->precomputed_send_from_buf_ctrl_word[0] = + (BPC_WRITE + | BPC_BUFFER(sm->buf0) + | BPC_PORT(sm->send_args.port) + | BPC_STEP(1) + | BPC_FIRST_LINE(sm->send_args.first_line) + | BPC_LAST_LINE(0)); // last line filled in at runtime + + sm->precomputed_send_from_buf_ctrl_word[1] = + (BPC_WRITE + | BPC_BUFFER(sm->buf0 ^ 1) + | BPC_PORT(sm->send_args.port) + | BPC_STEP(1) + | BPC_FIRST_LINE(sm->send_args.first_line) + | BPC_LAST_LINE(0)); // last line filled in at runtime + +} + +static inline void +dbsm_receive_to_buf(dbsm_t *sm, int bufno) +{ + buffer_pool_ctrl->ctrl = sm->precomputed_receive_to_buf_ctrl_word[bufno & 1]; +} + +static inline void +dbsm_send_from_buf(dbsm_t *sm, int bufno) +{ + buffer_pool_ctrl->ctrl = + (sm->precomputed_send_from_buf_ctrl_word[bufno & 1] + | BPC_LAST_LINE(buffer_pool_status->last_line[bufno] - sm->last_line_adj)); +} + +void +dbsm_start(dbsm_t *sm) +{ + // printf("dbsm_start: buf0 = %d, recv_port = %d\n", sm->buf0, sm->recv_args.port); + + sm->running = true; + + buffer_state[sm->buf0] = BS_EMPTY; + buffer_state[sm->buf0 ^ 1] = BS_EMPTY; + + bp_clear_buf(sm->buf0); + bp_clear_buf(sm->buf0 ^ 1); + + sm->tx_idle = true; + sm->rx_idle = false; + dbsm_receive_to_buf(sm, sm->buf0); + buffer_state[sm->buf0] = BS_FILLING; + +} + + +void +dbsm_stop(dbsm_t *sm) +{ + sm->running = false; + bp_clear_buf(sm->buf0); + bp_clear_buf(sm->buf0 ^ 1); + buffer_state[sm->buf0] = BS_EMPTY; + buffer_state[sm->buf0 ^ 1] = BS_EMPTY; +} + +static void dbsm_process_helper(dbsm_t *sm, int buf_this); +static void dbsm_error_helper(dbsm_t *sm, int buf_this); + +void +dbsm_process_status(dbsm_t *sm, uint32_t status) +{ + if (!sm->running) + return; + + if (status & (BPS_ERROR(sm->buf0) | BPS_ERROR(sm->buf0 ^ 1))){ + putchar('E'); + // Most likely an ethernet Rx error. We just restart the transfer. + if (status & (BPS_ERROR(sm->buf0))) + dbsm_error_helper(sm, sm->buf0); + + if (status & (BPS_ERROR(sm->buf0 ^ 1))) + dbsm_error_helper(sm, sm->buf0 ^ 1); + } + + if (status & BPS_DONE(sm->buf0)) + dbsm_process_helper(sm, sm->buf0); + + if (status & BPS_DONE(sm->buf0 ^ 1)) + dbsm_process_helper(sm, sm->buf0 ^ 1); +} + +static void +dbsm_process_helper(dbsm_t *sm, int buf_this) +{ + int buf_other = buf_this ^ 1; + + bp_clear_buf(buf_this); + + if (buffer_state[buf_this] == BS_FILLING){ + buffer_state[buf_this] = BS_FULL; + // + // does s/w handle this packet? + // + if (sm->inspect(sm, buf_this)){ + // s/w handled the packet; refill the buffer + dbsm_receive_to_buf(sm, buf_this); + buffer_state[buf_this] = BS_FILLING; + } + + else { // s/w didn't handle this; pass it on + + if(buffer_state[buf_other] == BS_EMPTY){ + dbsm_receive_to_buf(sm, buf_other); + buffer_state[buf_other] = BS_FILLING; + } + else + sm->rx_idle = true; + + if (sm->tx_idle){ + sm->tx_idle = false; + dbsm_send_from_buf(sm, buf_this); + buffer_state[buf_this] = BS_EMPTYING; + } + } + } + else { // buffer was emptying + buffer_state[buf_this] = BS_EMPTY; + if (sm->rx_idle){ + sm->rx_idle = false; + dbsm_receive_to_buf(sm, buf_this); + buffer_state[buf_this] = BS_FILLING; + } + if (buffer_state[buf_other] == BS_FULL){ + dbsm_send_from_buf(sm, buf_other); + buffer_state[buf_other] = BS_EMPTYING; + } + else + sm->tx_idle = true; + } +} + +static void +dbsm_error_helper(dbsm_t *sm, int buf_this) +{ + bp_clear_buf(buf_this); // clears ERROR flag + + if (buffer_state[buf_this] == BS_FILLING){ + dbsm_receive_to_buf(sm, buf_this); // restart the xfer + } + else { // buffer was emptying + dbsm_send_from_buf(sm, buf_this); // restart the xfer + } +} + +/* + * Handle DSP Tx underrun + */ +void +dbsm_handle_tx_underrun(dbsm_t *sm) +{ + // clear the DSP Tx state machine + sr_tx_ctrl->clear_state = 1; + + // If there's a buffer that's empyting, clear it & flush xfer + + if (buffer_state[sm->buf0] == BS_EMPTYING){ + bp_clear_buf(sm->buf0); + sr_tx_ctrl->clear_state = 1; // flush partial packet + // drop frame in progress on ground. Pretend it finished + dbsm_process_helper(sm, sm->buf0); + } + else if (buffer_state[sm->buf0 ^ 1] == BS_EMPTYING){ + bp_clear_buf(sm->buf0 ^ 1); + sr_tx_ctrl->clear_state = 1; // flush partial packet + // drop frame in progress on ground. Pretend it finished + dbsm_process_helper(sm, sm->buf0 ^ 1); + } +} + +/* + * Handle DSP Rx overrun + */ +void +dbsm_handle_rx_overrun(dbsm_t *sm) +{ + sr_rx_ctrl->clear_overrun = 1; + + // If there's a buffer that's filling, clear it. + // Any restart will be the job of the caller. + + if (buffer_state[sm->buf0] == BS_FILLING) + bp_clear_buf(sm->buf0); + + if (buffer_state[sm->buf0 ^1] == BS_FILLING) + bp_clear_buf(sm->buf0 ^ 1); +} + +void +dbsm_wait_for_opening(dbsm_t *sm) +{ + if (buffer_state[sm->buf0] == BS_EMPTYING){ + // wait for xfer to complete + int mask = BPS_DONE(sm->buf0) | BPS_ERROR(sm->buf0) | BPS_IDLE(sm->buf0); + while ((buffer_pool_status->status & mask) == 0) + ; + } + else if (buffer_state[sm->buf0 ^ 1] == BS_EMPTYING){ + // wait for xfer to complete + int mask = BPS_DONE(sm->buf0 ^ 1) | BPS_ERROR(sm->buf0 ^ 1) | BPS_IDLE(sm->buf0 ^ 1); + while ((buffer_pool_status->status & mask) == 0) + ; + } +} diff --git a/firmware/microblaze/lib/dbsm.h b/firmware/microblaze/lib/dbsm.h new file mode 100644 index 000000000..cb7e12fc3 --- /dev/null +++ b/firmware/microblaze/lib/dbsm.h @@ -0,0 +1,90 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_DBSM_H +#define INCLUDED_DBSM_H + +/* + * Double Buffering State Machine + */ + +#include <stdint.h> +#include <stdbool.h> + +struct _dbsm; +typedef struct _dbsm dbsm_t; + +/* + * pointer to function that does packet inspection. + * + * If one of these returns true, it means that the s/w + * handled that packet, and that it should NOT be passed + * on to the normal destination port. + */ +typedef bool (*inspector_t)(dbsm_t *sm, int buf_this); + +bool dbsm_nop_inspector(dbsm_t *sm, int buf_this); // returns false + + +typedef struct +{ + uint16_t port; + uint16_t first_line; + uint16_t last_line; +} buf_cmd_args_t; + +/*! + * double buffer state machine + */ +struct _dbsm +{ + uint8_t buf0; // Must be even. This machine uses buf0 and buf0+1 + uint8_t running; + uint8_t rx_idle; + uint8_t tx_idle; + buf_cmd_args_t recv_args; + buf_cmd_args_t send_args; + inspector_t inspect; + uint32_t precomputed_receive_to_buf_ctrl_word[2]; + uint32_t precomputed_send_from_buf_ctrl_word[2]; + int last_line_adj; +}; + +void dbsm_init(dbsm_t *sm, int buf0, + const buf_cmd_args_t *recv, const buf_cmd_args_t *send, + inspector_t inspect); + +void dbsm_start(dbsm_t *sm); +void dbsm_stop(dbsm_t *sm); +void dbsm_process_status(dbsm_t *sm, uint32_t status); +void dbsm_handle_tx_underrun(dbsm_t *sm); +void dbsm_handle_rx_overrun(dbsm_t *sm); + +/* + * The cpu calls this when it want to ensure that it can send a buffer + * to the same destination being used by this state machine. + * + * If neither buffer is EMPTYING it returns immediately. If a buffer + * is EMPYTING, it waits for the h/w to transition to the DONE or + * ERROR state. + * + * When this function returns, the caller queues it's buffer and busy + * waits for it to complete. + */ +void dbsm_wait_for_opening(dbsm_t *sm); + +#endif /* INCLUDED_DBSM_H */ diff --git a/firmware/microblaze/lib/eeprom.c b/firmware/microblaze/lib/eeprom.c new file mode 100644 index 000000000..b12ffe082 --- /dev/null +++ b/firmware/microblaze/lib/eeprom.c @@ -0,0 +1,69 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "i2c.h" +#include "mdelay.h" + +static const int EEPROM_PAGESIZE = 16; + +bool +eeprom_write (int i2c_addr, int eeprom_offset, const void *buf, int len) +{ + unsigned char cmd[2]; + const unsigned char *p = (unsigned char *) buf; + + // The simplest thing that could possibly work: + // all writes are single byte writes. + // + // We could speed this up using the page write feature, + // but we write so infrequently, why bother... + + while (len-- > 0){ + cmd[0] = eeprom_offset++; + cmd[1] = *p++; + bool r = i2c_write (i2c_addr, cmd, sizeof (cmd)); + mdelay (10); // delay 10ms worst case write time + if (!r) + return false; + } + return true; +} + +bool +eeprom_read (int i2c_addr, int eeprom_offset, void *buf, int len) +{ + unsigned char *p = (unsigned char *) buf; + + // We setup a random read by first doing a "zero byte write". + // Writes carry an address. Reads use an implicit address. + + unsigned char cmd[1]; + cmd[0] = eeprom_offset; + if (!i2c_write (i2c_addr, cmd, sizeof (cmd))) + return false; + + while (len > 0){ + // int n = std::min (len, MAX_EP0_PKTSIZE); + int n = len; + if (!i2c_read (i2c_addr, p, n)) + return false; + len -= n; + p += n; + } + return true; +} + diff --git a/firmware/microblaze/lib/eth_mac.c b/firmware/microblaze/lib/eth_mac.c new file mode 100644 index 000000000..375d3f4d4 --- /dev/null +++ b/firmware/microblaze/lib/eth_mac.c @@ -0,0 +1,127 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "eth_mac.h" +#include "memory_map.h" +#include <stdbool.h> +#include "eth_phy.h" // for simulation constants +#include "mdelay.h" +#include "stdio.h" + +#define PHY_ADDR 1 + +void +eth_mac_set_addr(const eth_mac_addr_t *src) +{ + eth_mac->ucast_hi = + (((unsigned int)src->addr[0])<<8) + + ((unsigned int)src->addr[1]); + eth_mac->ucast_lo = + (((unsigned int)src->addr[2])<<24) + + (((unsigned int)src->addr[3])<<16) + + (((unsigned int)src->addr[4])<<8) + + (((unsigned int)src->addr[5])); +} + + +void +eth_mac_init(const eth_mac_addr_t *src) +{ + eth_mac->miimoder = 25; // divider from CPU clock (50MHz/25 = 2MHz) + + eth_mac_set_addr(src); + eth_mac->settings = MAC_SET_PAUSE_EN | MAC_SET_PASS_BCAST | MAC_SET_PASS_UCAST | MAC_SET_PAUSE_SEND_EN; + + eth_mac->pause_time = 38; + eth_mac->pause_thresh = 1200; + + // set rx flow control high and low water marks + // unsigned int lwmark = (2*2048 + 64)/4; // 2 * 2048-byte frames + 1 * 64-byte pause frame + // eth_mac->fc_hwmark = lwmark + 2048/4; // plus a 2048-byte frame + + // eth_mac->fc_lwmark = 600; // there are currently 2047 lines in the fifo + // eth_mac->fc_hwmark = 1200; + //eth_mac->fc_padtime = 1700; // how long before flow control runs out do we + // request a re-pause. Units of 8ns (bytes) + + //eth_mac->tx_pause_en = 0; // pay attn to pause frames sent to us + //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge + //eth_mac->pause_frame_send_en = 0; // enable sending pause frames +} + +int +eth_mac_read_rmon(int addr) +{ + int t = 0; + /* + eth_mac->rmon_rd_addr = addr; + eth_mac->rmon_rd_apply = 1; + while(eth_mac->rmon_rd_grant == 0) + ; + + t = eth_mac->rmon_rd_dout; + eth_mac->rmon_rd_apply = 0; + */ + return t; +} + +int +eth_mac_miim_read(int addr) +{ + if (hwconfig_simulation_p()){ + switch(addr){ + case PHY_LINK_AN: + return LANSR_MASTER | LANSR_LINK_GOOD | LANSR_SPEED_1000; + default: + return 0; + } + } + + int phy_addr = PHY_ADDR; + eth_mac->miiaddress = ((addr & 0x1f) << 8) | phy_addr; + eth_mac->miicommand = MIIC_RSTAT; + + while((eth_mac->miistatus & MIIS_BUSY) != 0) + ; + + int r = eth_mac->miirx_data; + //printf("MIIM-READ ADDR 0x%x DATA 0x%x\n",addr, r); + return r; +} + +void +eth_mac_miim_write(int addr, int value) +{ + int phy_addr = PHY_ADDR; + eth_mac->miiaddress = ((addr & 0x1f) << 8) | phy_addr; + eth_mac->miitx_data = value; + eth_mac->miicommand = MIIC_WCTRLDATA; + + //printf("MIIM-WRITE ADDR 0x%x VAL 0x%x\n",addr,value); + while((eth_mac->miistatus & MIIS_BUSY) != 0) + ; +} + +int +eth_mac_miim_read_status(void) +{ + if (hwconfig_simulation_p()) + return 0; + + return eth_mac->miistatus; +} diff --git a/firmware/microblaze/lib/eth_mac.h b/firmware/microblaze/lib/eth_mac.h new file mode 100644 index 000000000..65717f6f8 --- /dev/null +++ b/firmware/microblaze/lib/eth_mac.h @@ -0,0 +1,32 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_ETH_MAC_H +#define INCLUDED_ETH_MAC_H + +#include "network.h" + +void eth_mac_init(const eth_mac_addr_t *src); + +void eth_mac_set_addr(const eth_mac_addr_t *src); +int eth_mac_read_rmon(int addr); +int eth_mac_miim_read(int addr); +void eth_mac_miim_write(int addr, int value); +int eth_mac_miim_read_status(void); + +#endif /* INCLUDED_ETH_MAC_H */ diff --git a/firmware/microblaze/lib/eth_mac_regs.h b/firmware/microblaze/lib/eth_mac_regs.h new file mode 100644 index 000000000..d680f8de0 --- /dev/null +++ b/firmware/microblaze/lib/eth_mac_regs.h @@ -0,0 +1,62 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_ETH_MAC_REGS_H +#define INCLUDED_ETH_MAC_REGS_H + +/* + * Simple GEMAC + * + */ +typedef struct { + volatile int settings; + volatile int ucast_hi; + volatile int ucast_lo; + volatile int mcast_hi; + volatile int mcast_lo; + volatile int miimoder; + volatile int miiaddress; + volatile int miitx_data; + volatile int miicommand; + volatile int miistatus; + volatile int miirx_data; + volatile int pause_time; + volatile int pause_thresh; +} eth_mac_regs_t; + +// settings register +#define MAC_SET_PAUSE_EN (1 << 0) // Makes us respect received pause frames (normally on) +#define MAC_SET_PASS_ALL (1 << 1) // Enables promiscuous mode, currently broken +#define MAC_SET_PASS_PAUSE (1 << 2) // Sends pause frames through (normally off) +#define MAC_SET_PASS_BCAST (1 << 3) // Sends broadcast frames through (normally on) +#define MAC_SET_PASS_MCAST (1 << 4) // Sends multicast frames that match mcast addr (normally off) +#define MAC_SET_PASS_UCAST (1 << 5) // Sends unicast (normal) frames through if they hit in address filter (normally on) +#define MAC_SET_PAUSE_SEND_EN (1 << 6) // Enables sending pause frames + +// miicommand register +#define MIIC_SCANSSTAT (1 << 0) // Scan status +#define MIIC_RSTAT (1 << 1) // Read status +#define MIIC_WCTRLDATA (1 << 2) // Write control data + +// miistatus register +#define MIIS_LINKFAIL (1 << 0) // The link failed +#define MIIS_BUSY (1 << 1) // The MII is busy (operation in progress) +#define MIIS_NVALID (1 << 2) // The data in the status register is invalid + // This it is only valid when the scan status is active. + +#endif /* INCLUDED_ETH_MAC_REGS_H */ diff --git a/firmware/microblaze/lib/eth_phy.h b/firmware/microblaze/lib/eth_phy.h new file mode 100644 index 000000000..6c16f97b7 --- /dev/null +++ b/firmware/microblaze/lib/eth_phy.h @@ -0,0 +1,219 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Much of this was extracted from the Linux e1000_hw.h file */ + +#ifndef INCLUDED_ETH_PHY_H +#define INCLUDED_ETH_PHY_H + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ + +#define PHY_CTRL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +/* PHY 1000 MII Register additions in DP83856 */ +/* The part implements 0x00 thru 0x1f; we use these. */ + +#define PHY_LINK_AN 0x11 /* Link and Auto Negotiation Status Reg */ +#define PHY_INT_STATUS 0x14 /* Interupt Status Reg (RO) */ +#define PHY_INT_MASK 0x15 /* Interrupt Mask Reg (RW) */ +#define PHY_INT_CLEAR 0x17 /* Interrupt Clear Reg (RW) */ + + +/* Bit definitions for some of the registers above */ + +/* PHY Control Register (PHY_CTRL) */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ + +/* PHY Status Register (PHY_STATUS) */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Autoneg Advertisement Register (PHY_AUTONEG_ADV) */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Link Partner Ability Register (Base Page) (PHY_LP_ABILITY) */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Autoneg Expansion Register (PHY_AUTONEG_EXP) */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ + +/* Next Page TX Register (PHY_NEXT_PAGE_TX) */ +#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ + +/* Link Partner Next Page Register (PHY_LP_NEXT_PAGE) */ +#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ +#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ + +/* 1000BASE-T Control Register (PHY_1000T_CTRL) */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ + /* 0=DTE device */ +#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ + /* 0=Configure PHY as Slave */ +#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ + /* 0=Automatic Master/Slave config */ +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ + +/* 1000BASE-T Status Register (PHY_1000T_STATUS) */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 +#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 +#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 +#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20 +#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 + +/* Extended Status Register (PHY_EXT_STATUS) */ +#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ + +#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ +#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ + +#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ + /* (0=enable, 1=disable) */ + +/* Link and Auto Negotiation Status Reg (PHY_LINK_AN) [READ-ONLY] */ +#define LANSR_MASTER 0x0001 /* 1=PHY is currently in master mode */ +#define LANSR_FULL_DUPLEX 0x0002 /* 1=PHY is currently full duplex */ +#define LANSR_LINK_GOOD 0x0004 /* 1=a good link is established */ +#define LANSR_SPEED_MASK 0x0018 +#define LANSR_SPEED_10 0x0000 /* 10Mb/s */ +#define LANSR_SPEED_100 0x0008 /* 100Mb/s */ +#define LANSR_SPEED_1000 0x0010 /* 1000Mb/s */ +#define LANSR_SPEED_RSRVD 0x0018 /* reserved */ +#define LANSR_NON_COMP_MODE 0x0020 /* 1=detects only in non-compliant mode */ +#define LANSR_DEEP_LOOPBACK 0x0040 /* 1=the PHY operates in deep loopback mode */ +#define LANSR_SHALLOW_LOOPBACK 0x0080 /* 1=the PHY operates in shallow loopback mode */ +#define LANSR_RSRVD_8 0x0100 /* reserved */ +#define LANSR_FIFO_ERR 0x0200 /* 1=FIFO error occurred */ +#define LANSR_MDIX_XOVER 0x0400 /* 1=PHY's MDI is in cross-over mode */ +#define LANSR_RSRVD_11 0x0800 /* resevered */ +#define LANSR_TP_POLARITY_REV 0xf000 /* Twisted pair polarity status A:D([15:12]) 1=reversed */ + +/* Interrupt status, mask and clear regs (PHY_INT_{STATUS,MASK,CLEAR}) */ +#define PHY_INT_RSRVD_0 0x0001 /* reserved */ +#define PHY_INT_RSRVD_1 0x0002 /* reserved */ +#define PHY_INT_RSRVD_2 0x0004 /* reserved */ +#define PHY_INT_REM_FLT_CNG 0x0008 /* Remote Fault Changed */ +#define PHY_INT_AN_CMPL 0x0010 /* Auto-negotiation completion */ +#define PHY_INT_NXT_PG_RCVD 0x0020 /* Next Page Received */ +#define PHY_INT_JABBER_CNG 0x0040 /* Jabber Changed */ +#define PHY_INT_NO_LINK 0x0080 /* No link after auto-negotiation */ +#define PHY_INT_NO_HCD 0x0100 /* AN couldn't determine highest common denominator */ +#define PHY_INT_MAS_SLA_ERR 0x0200 /* Master / Slave Error: couldn't resolve */ +#define PHY_INT_PRL_DET_FLT 0x0400 /* Parallel detection fault */ +#define PHY_INT_POL_CNG 0x0800 /* Polarity of any channel changed */ +#define PHY_INT_MDIX_CNG 0x1000 /* MDIX changed. A pair swap occurred. */ +#define PHY_INT_DPLX_CNG 0x2000 /* Duplex changed */ +#define PHY_INT_LNK_CNG 0x4000 /* Link changed (asserted when a link is established or broken) */ +#define PHY_INT_SPD_CNG 0x8000 /* Speed changed */ + +#endif /* INCLUDED_ETH_PHY_H */ diff --git a/firmware/microblaze/lib/ethernet.c b/firmware/microblaze/lib/ethernet.c new file mode 100644 index 000000000..5402a6c9f --- /dev/null +++ b/firmware/microblaze/lib/ethernet.c @@ -0,0 +1,348 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "ethernet.h" +#include "memory_map.h" +#include "eth_phy.h" +#include "eth_mac.h" +#include "eth_mac_regs.h" +#include "pic.h" +#include "hal_io.h" +#include "nonstdio.h" +#include <stdbool.h> +#include "i2c.h" +#include "usrp2_i2c_addr.h" + + +#define VERBOSE 0 + +static ethernet_t ed_state; +static ethernet_link_changed_callback_t ed_callback = 0; + +void +ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback) +{ + ed_callback = new_callback; +} + + +static void +ed_set_mac_speed(int speed) +{ + printf("Speed set to %d\n",speed); + /* + switch(speed){ + case 10: + eth_mac->speed = 1; + break; + case 100: + eth_mac->speed = 2; + break; + case 1000: + eth_mac->speed = 4; + break; + default: + break; + } + */ +} + +static void +ed_link_up(int speed) +{ + // putstr("ed_link_up: "); puthex16_nl(speed); + + ed_set_mac_speed(speed); + + if (ed_callback) // fire link changed callback + (*ed_callback)(speed); +} + +static void +ed_link_down(void) +{ + // putstr("ed_link_down\n"); + + if (ed_callback) // fire link changed callback + (*ed_callback)(0); +} + + +static void +ed_link_speed_change(int speed) +{ + ed_link_down(); + ed_link_up(speed); +} + +static void +print_flow_control(int flow_control) +{ + static const char *flow_control_msg[4] = { + "NONE", "WE_TX", "WE_RX", "SYMMETRIC" + }; + putstr("ethernet flow control: "); + puts(flow_control_msg[flow_control & 0x3]); +} + +static void +check_flow_control_resolution(void) +{ + static const unsigned char table[16] = { + // index = {local_asm, local_pause, partner_asm, partner_pause} + FC_NONE, FC_NONE, FC_NONE, FC_NONE, + FC_NONE, FC_SYMM, FC_NONE, FC_SYMM, + FC_NONE, FC_NONE, FC_NONE, FC_WE_TX, + FC_NONE, FC_SYMM, FC_WE_RX, FC_SYMM + }; + + int us = eth_mac_miim_read(PHY_AUTONEG_ADV); + int lp = eth_mac_miim_read(PHY_LP_ABILITY); + int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3); + ed_state.flow_control = table[index]; + + if (1) + print_flow_control(ed_state.flow_control); +} + +/* + * Read the PHY state register to determine link state and speed + */ +static void +ed_check_phy_state(void) +{ + int lansr = eth_mac_miim_read(PHY_LINK_AN); + eth_link_state_t new_state = LS_UNKNOWN; + int new_speed = S_UNKNOWN; + + if (VERBOSE){ + putstr("LANSR: "); + puthex16_nl(lansr); + } + + if (lansr & LANSR_LINK_GOOD){ // link's up + if (VERBOSE) + puts(" LINK_GOOD"); + + new_state = LS_UP; + switch (lansr & LANSR_SPEED_MASK){ + case LANSR_SPEED_10: + new_speed = 10; + break; + + case LANSR_SPEED_100: + new_speed = 100; + break; + + case LANSR_SPEED_1000: + new_speed = 1000; + break; + + default: + new_speed = S_UNKNOWN; + break; + } + + check_flow_control_resolution(); + } + else { // link's down + if (VERBOSE) + puts(" NOT LINK_GOOD"); + + new_state = LS_DOWN; + new_speed = S_UNKNOWN; + } + + if (new_state != ed_state.link_state){ + ed_state.link_state = new_state; // remember new state + if (new_state == LS_UP) + ed_link_up(new_speed); + else if (new_state == LS_DOWN) + ed_link_down(); + } + else if (new_state == LS_UP && new_speed != ed_state.link_speed){ + ed_state.link_speed = new_speed; // remember new speed + ed_link_speed_change(new_speed); + } +} + +/* + * This is fired when the ethernet PHY state changes + */ +static void +eth_phy_irq_handler(unsigned irq) +{ + ed_check_phy_state(); + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all ints +} + +void +ethernet_init(void) +{ + eth_mac_init(ethernet_mac_addr()); + + ed_state.link_state = LS_UNKNOWN; + ed_state.link_speed = S_UNKNOWN; + + // initialize MAC registers + // eth_mac->tx_hwmark = 0x1e; + //eth_mac->tx_lwmark = 0x19; + + //eth_mac->crc_chk_en = 1; + //eth_mac->rx_max_length = 2048; + + // configure PAUSE frame stuff + //eth_mac->tx_pause_en = 1; // pay attn to pause frames sent to us + + //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge + //eth_mac->pause_frame_send_en = 1; // enable sending pause frames + + + // setup PHY to interrupt on changes + + unsigned mask = + (PHY_INT_AN_CMPL // auto-neg completed + | PHY_INT_NO_LINK // no link after auto-neg + | PHY_INT_NO_HCD // no highest common denominator + | PHY_INT_MAS_SLA_ERR // couldn't resolve master/slave + | PHY_INT_PRL_DET_FLT // parallel detection fault + | PHY_INT_LNK_CNG // link established or broken + | PHY_INT_SPD_CNG // speed changed + ); + + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all pending interrupts + eth_mac_miim_write(PHY_INT_MASK, mask); // enable the ones we want + + pic_register_handler(IRQ_PHY, eth_phy_irq_handler); + + // Advertise our flow control configuation. + // + // We and the link partner each specify two bits in the base page + // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR. + // The bits say what a device is "willing" to do, not what may actually + // happen as a result of the negotiation. There are 4 cases: + // + // PAUSE ASM_DIR + // + // 0 0 I have no flow control capability. + // + // 1 0 I both assert and respond to flow control. + // + // 0 1 I assert flow control, but cannot respond. That is, + // I want to be able to send PAUSE frames, but will ignore any + // you send to me. (This is our configuration.) + // + // 1 1 I can both assert and respond to flow control AND I am willing + // to operate symmetrically OR asymmetrically in EITHER direction. + // (We hope the link partner advertises this, otherwise we don't + // get what we want.) + + int t = eth_mac_miim_read(PHY_AUTONEG_ADV); + t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR); + t |= NWAY_AR_ASM_DIR; + + // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex + t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS); + + eth_mac_miim_write(PHY_AUTONEG_ADV, t); + int r = eth_mac_miim_read(PHY_AUTONEG_ADV); // DEBUG, read back + if (t != r){ + printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r); + } + + // Restart autonegotation. + // We want to ensure that we're advertising our PAUSE capabilities. + t = eth_mac_miim_read(PHY_CTRL); + eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG); +} + +static bool +unprogrammed(const eth_mac_addr_t *t) +{ + int i; + bool all_zeros = true; + bool all_ones = true; + for (i = 0; i < 6; i++){ + all_zeros &= t->addr[i] == 0x00; + all_ones &= t->addr[i] == 0xff; + } + return all_ones | all_zeros; +} + +static int8_t src_addr_initialized = false; +static eth_mac_addr_t src_addr = {{ + 0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff + }}; + +const eth_mac_addr_t * +ethernet_mac_addr(void) +{ + if (!src_addr_initialized){ // fetch from eeprom + src_addr_initialized = true; + + // if we're simulating, don't read the EEPROM model, it's REALLY slow + if (hwconfig_simulation_p()) + return &src_addr; + + eth_mac_addr_t tmp; + bool ok = eeprom_read(I2C_ADDR_MBOARD, MBOARD_MAC_ADDR, &tmp.addr[0], 6); + if (!ok || unprogrammed(&tmp)){ + // use the default + } + else + src_addr = tmp; + } + + return &src_addr; +} + +bool +ethernet_set_mac_addr(const eth_mac_addr_t *t) +{ + bool ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_MAC_ADDR, &t->addr[0], 6); + if (ok){ + src_addr = *t; + src_addr_initialized = true; + eth_mac_set_addr(t); + } + + return ok; +} + +int +ethernet_check_errors(void) +{ + // these registers are reset when read + + int r = 0; + /* + if (eth_mac_read_rmon(0x05) != 0) + r |= RME_RX_CRC; + if (eth_mac_read_rmon(0x06) != 0) + r |= RME_RX_FIFO_FULL; + if (eth_mac_read_rmon(0x07) != 0) + r |= RME_RX_2SHORT_2LONG; + + if (eth_mac_read_rmon(0x25) != 0) + r |= RME_TX_JAM_DROP; + if (eth_mac_read_rmon(0x26) != 0) + r |= RME_TX_FIFO_UNDER; + if (eth_mac_read_rmon(0x27) != 0) + r |= RME_TX_FIFO_OVER; + */ + return r; +} diff --git a/firmware/microblaze/lib/ethernet.h b/firmware/microblaze/lib/ethernet.h new file mode 100644 index 000000000..0e42d9b8d --- /dev/null +++ b/firmware/microblaze/lib/ethernet.h @@ -0,0 +1,82 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_ETHERNET_H +#define INCLUDED_ETHERNET_H + +#include "network.h" +#include <stdbool.h> + +typedef void (*ethernet_link_changed_callback_t)(int speed); + + +/*! + * \brief one time call to initialize ethernet + */ +void ethernet_init(void); + +/*! + * \brief Specify the function to call on link state changes. + * + * When the link comes up, speed is the link speed in Mbit/s. + * When the link goes down, speed is 0. + */ +void ethernet_register_link_changed_callback(ethernet_link_changed_callback_t cb); + +/*! + * \returns ethernet MAC address + */ +const eth_mac_addr_t *ethernet_mac_addr(void); + +/*! + * \brief write mac address to eeprom and begin using it + */ +bool ethernet_set_mac_addr(const eth_mac_addr_t *t); + + +/* + * \brief read RMON regs and return error mask + */ +int ethernet_check_errors(void); + +#define RME_RX_CRC 0x0001 +#define RME_RX_FIFO_FULL 0x0002 +#define RME_RX_2SHORT_2LONG 0x0004 + +#define RME_TX_JAM_DROP 0x0010 +#define RME_TX_FIFO_UNDER 0x0020 +#define RME_TX_FIFO_OVER 0x0040 + + +typedef enum { LS_UNKNOWN, LS_DOWN, LS_UP } eth_link_state_t; + +// flow control bitmasks +#define FC_NONE 0x0 +#define FC_WE_TX 0x1 // we send PAUSE frames +#define FC_WE_RX 0x2 // we honor received PAUSE frames +#define FC_SYMM (FC_WE_TX | FC_WE_RX) + +#define S_UNKNOWN (-1) // unknown link speed + +typedef struct { + eth_link_state_t link_state; + int link_speed; // in Mb/s + int flow_control; +} ethernet_t; + +#endif /* INCLUDED_ETHERNET_H */ diff --git a/firmware/microblaze/lib/exit.c b/firmware/microblaze/lib/exit.c new file mode 100644 index 000000000..95a3bf4de --- /dev/null +++ b/firmware/microblaze/lib/exit.c @@ -0,0 +1,28 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +extern void _exit(int status); + +void +exit(int status) +{ + _exit(status); +} diff --git a/firmware/microblaze/lib/hal_io.c b/firmware/microblaze/lib/hal_io.c new file mode 100644 index 000000000..fdfa15000 --- /dev/null +++ b/firmware/microblaze/lib/hal_io.c @@ -0,0 +1,323 @@ +/* -*- c -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +// conditionalized on HAL_IO_USES_DBOARD_PINS && HAL_IO_USES_UART + +#include "hal_io.h" +#include "memory_map.h" +#include "hal_uart.h" +#include <stdbool.h> +#include <stdio.h> +#include <string.h> +//#include <assert.h> + +/* + * ======================================================================== + * GPIOS + * ======================================================================== + */ +void +hal_gpio_set_ddr(int bank, int value, int mask) +{ + bank &= 0x1; + + if (bank == GPIO_TX_BANK){ // tx in top half + value <<= 16; + mask <<= 16; + } + else { + value &= 0xffff; + mask &= 0xffff; + } + + int ei = hal_disable_ints(); + gpio_base->ddr = (gpio_base->ddr & ~mask) | (value & mask); + hal_restore_ints(ei); +} + +static bool +code_to_int(char code, int *val) +{ + switch(code){ + case 's': *val = GPIO_SEL_SW; return true; + case 'a': *val = GPIO_SEL_ATR; return true; + case '0': *val = GPIO_SEL_DEBUG_0; return true; + case '1': *val = GPIO_SEL_DEBUG_1; return true; + case '.': + default: + return false; + } +} + +void +hal_gpio_set_sel(int bank, int bitno, char code) +{ + bank &= 0x1; + int t; + + if (!code_to_int(code, &t)) + return; + + int val = t << (2 * bitno); + int mask = 0x3 << (2 * bitno); + + volatile uint32_t *sel = bank == GPIO_TX_BANK ? &gpio_base->tx_sel : &gpio_base->rx_sel; + int ei = hal_disable_ints(); + int v = (*sel & ~mask) | (val & mask); + *sel = v; + hal_restore_ints(ei); + + if (0) + printf("hal_gpio_set_sel(bank=%d, bitno=%d, code=%c) *sel = 0x%x\n", + bank, bitno, code, v); +} + +void +hal_gpio_set_sels(int bank, char *codes) +{ + //assert(strlen(codes) == 16); + + int val = 0; + int mask = 0; + int i; + + for (i = 15; i >= 0; i--){ + val <<= 2; + mask <<= 2; + int t; + if (code_to_int(codes[i], &t)){ + val |= t; + mask |= 0x3; + } + } + + volatile uint32_t *sel = bank == GPIO_TX_BANK ? &gpio_base->tx_sel : &gpio_base->rx_sel; + int ei = hal_disable_ints(); + *sel = (*sel & ~mask) | (val & mask); + hal_restore_ints(ei); +} + + +/*! + * \brief write \p value to gpio pins specified by \p mask. + */ +void +hal_gpio_write(int bank, int value, int mask) +{ + static uint32_t _gpio_io_shadow; + + bank &= 0x1; + + if (bank == GPIO_TX_BANK){ // tx in top half + value <<= 16; + mask <<= 16; + } + else { + value &= 0xffff; + mask &= 0xffff; + } + + //int ei = hal_disable_ints(); + _gpio_io_shadow = (_gpio_io_shadow & ~mask) | (value & mask); + gpio_base->io = _gpio_io_shadow; + //hal_restore_ints(ei); +} + + +/*! + * \brief read GPIO bits + */ +int +hal_gpio_read(int bank) +{ + bank &= 0x1; + int r = gpio_base->io; + if (bank == GPIO_TX_BANK) + r >>= 16; + + return r & 0xffff; +} + +/* + * ======================================================================== + * leds + * ======================================================================== + */ + +static unsigned long leds_shadow = 0; +static unsigned long led_src_shadow = 0; + +void +hal_set_leds(int value, int mask) +{ + int ei = hal_disable_ints(); + leds_shadow = (leds_shadow & ~mask) | (value & mask); + output_regs->leds = leds_shadow; + hal_restore_ints(ei); +} + +// Allow hardware control over leds. 1 = hardware, 0 = software +void +hal_set_led_src(int value, int mask) +{ + int ei = hal_disable_ints(); + led_src_shadow = (led_src_shadow & ~mask) | (value & mask); + output_regs->led_src = led_src_shadow; + hal_restore_ints(ei); +} + +void +hal_toggle_leds(int mask) +{ + int ei = hal_disable_ints(); + leds_shadow ^= mask; + output_regs->leds = leds_shadow; + hal_restore_ints(ei); +} + + +// ================================================================ +// primitives +// ================================================================ + +#if defined(HAL_IO_USES_DBOARD_PINS) +// +// Does i/o using high 9-bits of rx daughterboard pins. +// +// 1 1 1 1 1 1 +// 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +// | char |W| | +// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ +// +// +// Asserts W when writing char +// + +#define W 0x0080 + +void +hal_io_init(void) +{ + // make high 9 bits of tx daughterboard outputs + hal_gpio_set_rx_mode(15, 7, GPIOM_OUTPUT); + + // and set them to zero + hal_gpio_set_rx(0x0000, 0xff80); +} + +void +hal_finish(void) +{ + volatile unsigned long *p = (unsigned long *) 0xC2F0; + *p = 0; +} + +// %c +inline int +putchar(int ch) +{ + hal_gpio_set_rx((s << 8) | W, 0xff80); + hal_gpio_set_rx(0, 0xff80); + return ch; +} + +#elif defined(HAL_IO_USES_UART) + +void +hal_io_init(void) +{ + hal_uart_init(); +} + +void +hal_finish(void) +{ +} + +// %c +inline int +putchar(int ch) +{ + hal_uart_putc(ch); + return ch; +} + +int +getchar(void) +{ + return hal_uart_getc(); +} + +#else // nop all i/o + +void +hal_io_init(void) +{ +} + +void +hal_finish(void) +{ +} + +// %c +inline int +putchar(int ch) +{ + return ch; +} + +int +getchar(void) +{ + return EOF; +} + +#endif + +// ================================================================ +// (slightly) higher level functions +// +// These are here so we can inline the calls to putchar. +// The rest of the stuff was moved to nonstdio.c +// ================================================================ + +// \n +inline void +newline(void) +{ + putchar('\n'); +} + +int +putstr(const char *s) +{ + while (*s) + putchar(*s++); + + return 0; +} + +int +puts(const char *s) +{ + putstr(s); + putchar('\n'); + return 0; +} diff --git a/firmware/microblaze/lib/hal_io.h b/firmware/microblaze/lib/hal_io.h new file mode 100644 index 000000000..f8ec617f8 --- /dev/null +++ b/firmware/microblaze/lib/hal_io.h @@ -0,0 +1,166 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_HAL_IO_H +#define INCLUDED_HAL_IO_H + +#include "memory_map.h" + +void hal_io_init(void); +void hal_finish(); + + +/* + * ------------------------------------------------------------------------ + * The GPIO pins are organized into two banks of 16-bits. + * Bank 0 goes to the Tx daughterboard, Bank 1 goes to the Rx daughterboard. + * + * Each pin may be configured as an input or an output from the FPGA. + * For output pins, there are four signals which may be routed to the + * pin. The four signals are the value written by s/w, the output of + * the ATR controller, or two different sources of debug info from the + * FPGA fabric. + * ------------------------------------------------------------------------ + */ + +#define GPIO_TX_BANK 0 // pins that connect to the Tx daughterboard +#define GPIO_RX_BANK 1 // pins that connect to the Rx daughterboard + + +/*! + * \brief Set the data direction for GPIO pins + * + * If the bit is set, it's an output from the FPGA. + * \param value is a 16-bit bitmask of values + * \param mask is a 16-bit bitmask of which bits to effect. + */ +void hal_gpio_set_ddr(int bank, int value, int mask); + +/*! + * \brief Select the source of the signal for an output pin. + * + * \param code is is one of 's', 'a', '0', '1' + * where 's' selects software output, 'a' selects ATR output, '0' selects + * debug 0, '1' selects debug 1. + */ +void hal_gpio_set_sel(int bank, int bitno, char code); + +/*! + * \brief Select the source of the signal for the output pins. + * + * \param codes is is a string of 16 characters composed of '.', 's', + * 'a', '0', or '1' where '.' means "don't change", 's' selects + * software output, 'a' selects ATR output, '0' selects debug 0, '1' + * selects debug 1. + */ +void hal_gpio_set_sels(int bank, char *codes); + + +/*! + * \brief write \p value to gpio pins specified by \p mask. + */ +void hal_gpio_write(int bank, int value, int mask); + +/*! + * \brief read GPIO bits + */ +int hal_gpio_read(int bank); + + +/* + * ------------------------------------------------------------------------ + * control the leds + * + * Low 4-bits are the general purpose leds on the board + * The next bit is the led on the ethernet connector + * ------------------------------------------------------------------------ + */ + +void hal_set_leds(int value, int mask); +void hal_set_led_src(int value, int mask); +void hal_toggle_leds(int mask); + +/* + * ------------------------------------------------------------------------ + * simple timeouts + * ------------------------------------------------------------------------ + */ + + + +static inline void +hal_set_timeout(int delta_ticks) +{ + sr_simple_timer->onetime = delta_ticks; +} + +/* + * ------------------------------------------------------------------------ + * interrupt enable/disable + * ------------------------------------------------------------------------ + */ + +/*! + * \brief Disable interrupts and return previous interrupt enable state. + * [Microblaze specific] + */ +static inline int +hal_disable_ints(void) +{ + int result, t0; + + asm volatile("mfs %0, rmsr \n\ + andni %1, %0, 0x2 \n\ + mts rmsr, %1" + : "=r" (result), "=r" (t0)); + return result; +} + +/*! + * \brief Enable interrupts and return previous interrupt enable state. + * [Microblaze specific] + */ +static inline int +hal_enable_ints(void) +{ + int result, t0; + + asm volatile("mfs %0, rmsr \n\ + ori %1, %0, 0x2 \n\ + mts rmsr, %1" + : "=r" (result), "=r" (t0)); + return result; +} + +/*! + * \brief Set interrupt enable state to \p prev_state. + * [Microblaze specific] + */ +static inline void +hal_restore_ints(int prev_state) +{ + int t0, t1; + asm volatile("andi %0, %2, 0x2 \n\ + mfs %1, rmsr \n\ + andni %1, %1, 0x2 \n\ + or %1, %1, %0 \n\ + mts rmsr, %1" + : "=r" (t0), "=r"(t1) : "r" (prev_state)); +} + +#endif /* INCLUDED_HAL_IO_H */ diff --git a/firmware/microblaze/lib/hal_uart.c b/firmware/microblaze/lib/hal_uart.c new file mode 100644 index 000000000..75b12b432 --- /dev/null +++ b/firmware/microblaze/lib/hal_uart.c @@ -0,0 +1,77 @@ +/* -*- c -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "hal_uart.h" +#include "hal_io.h" +#include "memory_map.h" + +// First pass, no interrupts + +// Replaced with divisors.py which generates best divisor +//#define CALC_DIVISOR(rate) (WISHBONE_CLK_RATE / ((rate) * 16)) + +#define NSPEEDS 6 +#define MAX_WB_DIV 4 + +static const uint16_t +divisor_table[MAX_WB_DIV+1][NSPEEDS] = { + { 2, 2, 2, 2, 2, 2}, // 0: can't happen + { 651, 326, 163, 109, 54, 27 }, // 1: 100 MHz + { 326, 163, 81, 54, 27, 14 }, // 2: 50 MHz + { 217, 109, 54, 36, 18, 9 }, // 3: 33.3333 MHz + { 163, 81, 41, 27, 14, 7 }, // 4: 25 MHz +}; + +#define u uart_regs + +void +hal_uart_init(void) +{ + u->clkdiv = 217; // 230400 bps +} + +void +hal_uart_putc(int ch) +{ + if (ch == '\n') // FIXME for now map \n -> \r\n + hal_uart_putc('\r'); + + while (u->txlevel == 0) // wait for fifo to have space + ; + + u->txchar = ch; +} + +void +hal_uart_putc_nowait(int ch) +{ + if (ch == '\n') // FIXME for now map \n -> \r\n + hal_uart_putc('\r'); + + if(u->txlevel) // If fifo has space + u->txchar = ch; +} + +int +hal_uart_getc(void) +{ + while ((u->rxlevel) == 0) // wait for data to be ready + ; + + return u->rxchar; +} diff --git a/firmware/microblaze/lib/hal_uart.h b/firmware/microblaze/lib/hal_uart.h new file mode 100644 index 000000000..2ddfa6259 --- /dev/null +++ b/firmware/microblaze/lib/hal_uart.h @@ -0,0 +1,68 @@ +/* -*- c -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_HAL_UART_H +#define INCLUDED_HAL_UART_H + + +/*! + * \brief one-time call to init + */ +void hal_uart_init(void); + +typedef enum { + US_9600, + US_19200, + US_38400, + US_57600, + US_115200, + US_230400, +} hal_uart_speed_t; + +typedef struct { + hal_uart_speed_t speed; +} hal_uart_config_t; + +/*! + * \brief Set uart parameters + * Default is 115,200 bps, 8N1. + */ +void hal_uart_set_config(const hal_uart_config_t *c); + +/*! + * \brief Get uart configuation. + */ +void hal_uart_get_config(hal_uart_config_t *c); + +/*! + * \brief Enqueue \p ch for output over serial port + */ +void hal_uart_putc(int ch); + +/*! + * \brief Enqueue \p ch for output over serial port, silent fail if queue is full + */ +void hal_uart_putc_nowait(int ch); + +/* + * \brief Blocking read of next char from serial port + */ +int hal_uart_getc(void); + + +#endif /* INCLUDED_HAL_UART_H */ diff --git a/firmware/microblaze/lib/i2c.c b/firmware/microblaze/lib/i2c.c new file mode 100644 index 000000000..3f738733b --- /dev/null +++ b/firmware/microblaze/lib/i2c.c @@ -0,0 +1,127 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "i2c.h" +#include "memory_map.h" +#include "stdint.h" + +#define MAX_WB_DIV 4 // maximum wishbone divisor (from 100 MHz MASTER_CLK) + +// prescaler divisor values for 100 kHz I2C [uses 5 * SCLK internally] + +#define PRESCALER(wb_div) (((MASTER_CLK_RATE/(wb_div)) / (5 * 100000)) - 1) + +static uint16_t prescaler_values[MAX_WB_DIV+1] = { + 0xffff, // 0: can't happen + PRESCALER(1), // 1: 100 MHz + PRESCALER(2), // 2: 50 MHz + PRESCALER(3), // 3: 33.333 MHz + PRESCALER(4), // 4: 25 MHz +}; + +void +i2c_init(void) +{ + i2c_regs->ctrl = 0; // disable core + + // setup prescaler depending on wishbone divisor + int wb_div = hwconfig_wishbone_divisor(); + if (wb_div > MAX_WB_DIV) + wb_div = MAX_WB_DIV; + + i2c_regs->prescaler_lo = prescaler_values[wb_div] & 0xff; + i2c_regs->prescaler_hi = (prescaler_values[wb_div] >> 8) & 0xff; + + i2c_regs->ctrl = I2C_CTRL_EN; // enable core + + // FIXME interrupt driven? +} + +static inline void +wait_for_xfer(void) +{ + while (i2c_regs->cmd_status & I2C_ST_TIP) // wait for xfer to complete + ; +} + +static inline bool +wait_chk_ack(void) +{ + wait_for_xfer(); + + if ((i2c_regs->cmd_status & I2C_ST_RXACK) != 0){ // target NAK'd + return false; + } + return true; +} + +bool +i2c_read (unsigned char i2c_addr, unsigned char *buf, unsigned int len) +{ + if (len == 0) // reading zero bytes always works + return true; + + while (i2c_regs->cmd_status & I2C_ST_BUSY) + ; + + i2c_regs->data = (i2c_addr << 1) | 1; // 7 bit address and read bit (1) + // generate START and write addr + i2c_regs->cmd_status = I2C_CMD_WR | I2C_CMD_START; + if (!wait_chk_ack()) + goto fail; + + for (; len > 0; buf++, len--){ + i2c_regs->cmd_status = I2C_CMD_RD | (len == 1 ? (I2C_CMD_NACK | I2C_CMD_STOP) : 0); + wait_for_xfer(); + *buf = i2c_regs->data; + } + return true; + + fail: + i2c_regs->cmd_status = I2C_CMD_STOP; // generate STOP + return false; +} + + +bool +i2c_write(unsigned char i2c_addr, const unsigned char *buf, unsigned int len) +{ + while (i2c_regs->cmd_status & I2C_ST_BUSY) + ; + + i2c_regs->data = (i2c_addr << 1) | 0; // 7 bit address and write bit (0) + + // generate START and write addr (and maybe STOP) + i2c_regs->cmd_status = I2C_CMD_WR | I2C_CMD_START | (len == 0 ? I2C_CMD_STOP : 0); + if (!wait_chk_ack()) + goto fail; + + for (; len > 0; buf++, len--){ + i2c_regs->data = *buf; + i2c_regs->cmd_status = I2C_CMD_WR | (len == 1 ? I2C_CMD_STOP : 0); + if (!wait_chk_ack()) + goto fail; + } + return true; + + fail: + i2c_regs->cmd_status = I2C_CMD_STOP; // generate STOP + return false; +} + + diff --git a/firmware/microblaze/lib/i2c.h b/firmware/microblaze/lib/i2c.h new file mode 100644 index 000000000..ecb6aa0d2 --- /dev/null +++ b/firmware/microblaze/lib/i2c.h @@ -0,0 +1,39 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_I2C_H +#define INCLUDED_I2C_H + +#include <stdbool.h> + +void i2c_init(void); +bool i2c_read (unsigned char i2c_addr, unsigned char *buf, unsigned int len); +bool i2c_write(unsigned char i2c_addr, const unsigned char *buf, unsigned int len); + + +// Write 24LC024 / 24LC025 EEPROM on motherboard or daughterboard. +// Which EEPROM is determined by i2c_addr. See i2c_addr.h + +bool eeprom_write (int i2c_addr, int eeprom_offset, const void *buf, int len); + +// Read 24LC024 / 24LC025 EEPROM on motherboard or daughterboard. +// Which EEPROM is determined by i2c_addr. See i2c_addr.h + +bool eeprom_read (int i2c_addr, int eeprom_offset, void *buf, int len); + +#endif /* INCLUDED_I2C_H */ diff --git a/firmware/microblaze/lib/lsadc.c b/firmware/microblaze/lib/lsadc.c new file mode 100644 index 000000000..7983552e7 --- /dev/null +++ b/firmware/microblaze/lib/lsadc.c @@ -0,0 +1,73 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "lsadc.h" +#include "spi.h" +#include "memory_map.h" + + +// AD9712 or AD7922 1 MS/s, 10-/12-bit ADCs + +//#define SPI_SS_DEBUG SPI_SS_RX_DB +#define SPI_SS_DEBUG 0 + + +void +lsadc_init(void) +{ + // nop +} + +/* + * The ADC's are pipelined. That is, you have to tell them + * which of the two inputs you want one cycle ahead of time. + * We could optimize and keep track of which one we used last + * time, but for simplicity we'll always tell it which + * one we want. This takes 2 16-bit xfers, one to set the + * input and one to read the one we want. + */ + +int +_lsadc_read(int which_adc, int slave_select) +{ + uint32_t r; + int channel = which_adc & 0x1; + + // Set CHN and STY equal to channel number. We don't want "daisy chain mode" + uint16_t cmd = (channel << 13) | (channel << 12); + + spi_transact(SPI_TXONLY, slave_select | SPI_SS_DEBUG, + cmd, 16, SPIF_PUSH_RISE | SPIF_LATCH_RISE); + + r = spi_transact(SPI_TXRX, slave_select | SPI_SS_DEBUG, + cmd, 16, SPIF_PUSH_RISE | SPIF_LATCH_RISE); + + return r & 0x0fff; +} + +int +lsadc_read_rx(int which_adc) +{ + return _lsadc_read(which_adc, SPI_SS_RX_ADC); +} + +int +lsadc_read_tx(int which_adc) +{ + return _lsadc_read(which_adc, SPI_SS_TX_ADC); +} diff --git a/firmware/microblaze/lib/lsadc.h b/firmware/microblaze/lib/lsadc.h new file mode 100644 index 000000000..319f34d91 --- /dev/null +++ b/firmware/microblaze/lib/lsadc.h @@ -0,0 +1,45 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_LSADC_H +#define INCLUDED_LSADC_H + +#include "memory_map.h" + +/*! + * \brief One time call to initialize low-speed ADCs. + */ +void lsadc_init(void); + +/*! + * \brief Read one of the low-speed Rx daughterboard ADCs. + * \param which_adc in [0, 1] + * + * \returns 12-bit value in [0,4095] + */ +int lsadc_read_rx(int which_adc); + +/*! + * \brief Read one of the low-speed Tx daughterboard ADCs. + * \param which_adc in [0, 1] + * + * \returns 12-bit value in [0,4095] + */ +int lsadc_read_tx(int which_adc); + + +#endif /* INCLUDED_LSADC_H */ diff --git a/firmware/microblaze/lib/lsdac.c b/firmware/microblaze/lib/lsdac.c new file mode 100644 index 000000000..6bc2e5cb5 --- /dev/null +++ b/firmware/microblaze/lib/lsdac.c @@ -0,0 +1,68 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "lsdac.h" +#include "spi.h" +#include "memory_map.h" + +// AD5624, AD5623 + +#define CMD(x) ((x) << 19) +#define CMD_WR_INPUT_N CMD(0) // write input N +#define CMD_UP_DAC_N CMD(1) // update DAC N from input reg +#define CMD_WR_INPUT_N_LDAC CMD(2) // write input N, update all +#define CMD_WR_UP_DAC_N CMD(3) // write and update N +#define CMD_WR_PWR_CONFIG CMD(4) // write power up/down config reg +#define CMD_SW_RESET CMD(5) // force s/w reset +#define CMD_WR_LDAC_CFG CMD(6) // write LDAC config reg +#define CMD_WR_INT_REF_CFG CMD(7) // write internal ref cfg reg (AD5623R only) + + +//#define SPI_SS_DEBUG SPI_SS_TX_DB +#define SPI_SS_DEBUG 0 + +inline static void +_write_rx(uint32_t v) +{ + spi_transact(SPI_TXONLY, SPI_SS_RX_DAC | SPI_SS_DEBUG, v, 24, SPIF_PUSH_RISE); +} + +inline static void +_write_tx(uint32_t v) +{ + spi_transact(SPI_TXONLY, SPI_SS_TX_DAC | SPI_SS_DEBUG, v, 24, SPIF_PUSH_RISE); +} + +void +lsdac_init(void) +{ + _write_tx(CMD_SW_RESET | 0x1); // power-on reset + _write_rx(CMD_SW_RESET | 0x1); // power-on reset +} + +void +lsdac_write_rx(int which_dac, int value) +{ + _write_rx(CMD_WR_UP_DAC_N | ((which_dac & 0x7) << 16) | ((value << 4) & 0xffff)); +} + +void +lsdac_write_tx(int which_dac, int value) +{ + _write_tx(CMD_WR_UP_DAC_N | ((which_dac & 0x7) << 16) | ((value << 4) & 0xffff)); +} diff --git a/firmware/microblaze/lib/lsdac.h b/firmware/microblaze/lib/lsdac.h new file mode 100644 index 000000000..9cad917e3 --- /dev/null +++ b/firmware/microblaze/lib/lsdac.h @@ -0,0 +1,47 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_LSDAC_H +#define INCLUDED_LSDAC_H + +#include "memory_map.h" + +/*! + * \brief One time call to initialize low-speed DACs. + */ +void lsdac_init(void); + +/*! + * \brief Write one of the low-speed Rx daughterboard DACs. + * \param which_dac in [0, 3] + * \param unsigned 12-bit value in [0, 4095] + * + * value maps linearly to output voltage from 0 to 3.3V + */ +void lsdac_write_rx(int which_dac, int value); + +/*! + * \brief Write one of the low-speed Tx daughterboard DACs. + * \param which_dac in [0, 3] + * \param unsigned 12-bit value in [0, 4095] + * + * value maps linearly to output voltage from 0 to 3.3V + */ +void lsdac_write_tx(int which_dac, int value); + + +#endif /* INCLUDED_LSDAC_H */ diff --git a/firmware/microblaze/lib/mdelay.c b/firmware/microblaze/lib/mdelay.c new file mode 100644 index 000000000..c8c119b1a --- /dev/null +++ b/firmware/microblaze/lib/mdelay.c @@ -0,0 +1,73 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mdelay.h" +#include "memory_map.h" + +// Delay about one millisecond. +// +// Need 33,333 cycles at 33 MHz. +// Each time around the loop is 10 cycles +// + +#define LOOPCNT(wb_div) (MASTER_CLK_RATE/(wb_div) / 10000) + +inline static void +delay_1ms(int loop_count) +{ + int i; + for (i = 0; i < loop_count; i++){ + asm volatile ("or r0, r0, r0\n\ + or r0, r0, r0\n\ + or r0, r0, r0\n\ + or r0, r0, r0\n\ + or r0, r0, r0\n\ + or r0, r0, r0\n\ + or r0, r0, r0\n"); + } +} + +// delay about ms milliseconds +void +mdelay(int ms) +{ + static int loop_count = -1; + + if (hwconfig_simulation_p()) + return; + + if (loop_count < 0){ + // set correct loop_count + static unsigned short lc[8] = { + 0, + LOOPCNT(1), + LOOPCNT(2), + LOOPCNT(3), + LOOPCNT(4), + LOOPCNT(5), + LOOPCNT(6), + LOOPCNT(7) + }; + + loop_count = lc[hwconfig_wishbone_divisor() & 0x7]; + } + + int i; + for (i = 0; i < ms; i++) + delay_1ms(loop_count); +} diff --git a/firmware/microblaze/lib/mdelay.h b/firmware/microblaze/lib/mdelay.h new file mode 100644 index 000000000..226bbb3f7 --- /dev/null +++ b/firmware/microblaze/lib/mdelay.h @@ -0,0 +1,29 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_MDELAY_H +#define INCLUDED_MDELAY_H + +/*! + * \brief Delay about ms milliseconds + * + * If simulating, _very_ short delay + */ +void mdelay(int ms); + +#endif /* INCLUDED_MDELAY_H */ diff --git a/firmware/microblaze/lib/memcpy_wa.c b/firmware/microblaze/lib/memcpy_wa.c new file mode 100644 index 000000000..ef20efaa9 --- /dev/null +++ b/firmware/microblaze/lib/memcpy_wa.c @@ -0,0 +1,42 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "memcpy_wa.h" +#include <stdint.h> +#include <stdlib.h> + +/* + * For copying to/from non-byte-adressable memory, such as + * the buffers. dst, src, and nbytes must all satisfy (x % 4 == 0) + */ +void +memcpy_wa(void *dst, const void *src, size_t nbytes) +{ + if (((intptr_t) dst & 0x3) + || ((intptr_t) src & 0x3) + || (nbytes & 0x3)) + exit(1); /* die! */ + + int *dp = (int *) dst; + int *sp = (int *) src; + unsigned nw = nbytes/4; + + unsigned i; + for (i = 0; i < nw; i++) + dp[i] = sp[i]; +} diff --git a/firmware/microblaze/lib/memcpy_wa.h b/firmware/microblaze/lib/memcpy_wa.h new file mode 100644 index 000000000..072fc148f --- /dev/null +++ b/firmware/microblaze/lib/memcpy_wa.h @@ -0,0 +1,32 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_MEMCPY_WA_H +#define INCLUDED_MEMCPY_WA_H + +#include <stddef.h> + +/* + * For copying to/from non-byte-adressable memory, such as + * the buffers. dst, src, and nbytes must all satisfy (x % 4 == 0) + */ +void memcpy_wa(void *dst, const void *src, size_t nbytes); + +#endif /* INCLUDED_MEMCPY_WA_H */ + + diff --git a/firmware/microblaze/lib/memory_map.h b/firmware/microblaze/lib/memory_map.h new file mode 100644 index 000000000..bb6a1036d --- /dev/null +++ b/firmware/microblaze/lib/memory_map.h @@ -0,0 +1,795 @@ +/* -*- c -*- */ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Overall Memory Map + * 0000-7FFF 32K RAM space (16K on 1500, 24K on 2000, 32K on DSP) + * 8000-BFFF 16K Buffer Pool + * C000-FFFF 16K Peripherals + */ + + +#ifndef INCLUDED_MEMORY_MAP_H +#define INCLUDED_MEMORY_MAP_H + +#include <stdint.h> + + +#define MASTER_CLK_RATE 100000000 // 100 MHz + + +//////////////////////////////////////////////////////////////// +// +// Memory map for embedded wishbone bus +// +//////////////////////////////////////////////////////////////// + + +//////////////////////////////////////////////////////////////// +// Main RAM, Slave 0 + +#define RAM_BASE 0x0000 + +//////////////////////////////////////////////////////////////// +// Buffer Pool RAM, Slave 1 +// +// The buffers themselves are located in Slave 1, Buffer Pool RAM. +// The status registers are in Slave 5, Buffer Pool Status. +// The control register is in Slave 7, Settings Bus. + +#define BUFFER_POOL_RAM_BASE 0x8000 + +#define NBUFFERS 8 +#define BP_NLINES 0x0200 // number of 32-bit lines in a buffer +#define BP_LAST_LINE (BP_NLINES - 1) // last line in a buffer + +#define buffer_pool_ram \ + ((uint32_t *) BUFFER_POOL_RAM_BASE) + +#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES]) + + +///////////////////////////////////////////////////// +// SPI Core, Slave 2. See core docs for more info +#define SPI_BASE 0xC000 // Base address (16-bit) + +typedef struct { + volatile uint32_t txrx0; + volatile uint32_t txrx1; + volatile uint32_t txrx2; + volatile uint32_t txrx3; + volatile uint32_t ctrl; + volatile uint32_t div; + volatile uint32_t ss; +} spi_regs_t; + +#define spi_regs ((spi_regs_t *) SPI_BASE) + + +// Masks for controlling different peripherals +#define SPI_SS_AD9510 1 +#define SPI_SS_AD9777 2 +#define SPI_SS_RX_DAC 4 +#define SPI_SS_RX_ADC 8 +#define SPI_SS_RX_DB 16 +#define SPI_SS_TX_DAC 32 +#define SPI_SS_TX_ADC 64 +#define SPI_SS_TX_DB 128 + +// Masks for different parts of CTRL reg +#define SPI_CTRL_ASS (1<<13) +#define SPI_CTRL_IE (1<<12) +#define SPI_CTRL_LSB (1<<11) +#define SPI_CTRL_TXNEG (1<<10) +#define SPI_CTRL_RXNEG (1<< 9) +#define SPI_CTRL_GO_BSY (1<< 8) +#define SPI_CTRL_CHAR_LEN_MASK 0x7F + +//////////////////////////////////////////////// +// I2C, Slave 3 +// See Wishbone I2C-Master Core Specification. + +#define I2C_BASE 0xC400 + +typedef struct { + volatile uint32_t prescaler_lo; // r/w + volatile uint32_t prescaler_hi; // r/w + volatile uint32_t ctrl; // r/w + volatile uint32_t data; // wr = transmit reg; rd = receive reg + volatile uint32_t cmd_status; // wr = command reg; rd = status reg +} i2c_regs_t; + +#define i2c_regs ((i2c_regs_t *) I2C_BASE) + +#define I2C_CTRL_EN (1 << 7) // core enable +#define I2C_CTRL_IE (1 << 6) // interrupt enable + +// +// STA, STO, RD, WR, and IACK bits are cleared automatically +// +#define I2C_CMD_START (1 << 7) // generate (repeated) start condition +#define I2C_CMD_STOP (1 << 6) // generate stop condition +#define I2C_CMD_RD (1 << 5) // read from slave +#define I2C_CMD_WR (1 << 4) // write to slave +#define I2C_CMD_NACK (1 << 3) // when a rcvr, send ACK (ACK=0) or NACK (ACK=1) +#define I2C_CMD_RSVD_2 (1 << 2) // reserved +#define I2C_CMD_RSVD_1 (1 << 1) // reserved +#define I2C_CMD_IACK (1 << 0) // set to clear pending interrupt + +#define I2C_ST_RXACK (1 << 7) // Received acknowledgement from slave (1 = NAK, 0 = ACK) +#define I2C_ST_BUSY (1 << 6) // 1 after START signal detected; 0 after STOP signal detected +#define I2C_ST_AL (1 << 5) // Arbitration lost. 1 when core lost arbitration +#define I2C_ST_RSVD_4 (1 << 4) // reserved +#define I2C_ST_RSVD_3 (1 << 3) // reserved +#define I2C_ST_RSVD_2 (1 << 2) // reserved +#define I2C_ST_TIP (1 << 1) // Transfer-in-progress +#define I2C_ST_IP (1 << 0) // Interrupt pending + + +//////////////////////////////////////////////// +// GPIO, Slave 4 +// +// These go to the daughterboard i/o pins + +#define GPIO_BASE 0xC800 + +typedef struct { + volatile uint32_t io; // tx data in high 16, rx in low 16 + volatile uint32_t ddr; // 32 bits, 1 means output. tx in high 16, rx in low 16 + volatile uint32_t tx_sel; // 16 2-bit fields select which source goes to TX DB + volatile uint32_t rx_sel; // 16 2-bit fields select which source goes to RX DB +} gpio_regs_t; + +// each 2-bit sel field is layed out this way +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic +#define GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric + +#define gpio_base ((gpio_regs_t *) GPIO_BASE) + +/////////////////////////////////////////////////// +// Buffer Pool Status, Slave 5 +// +// The buffers themselves are located in Slave 1, Buffer Pool RAM. +// The status registers are in Slave 5, Buffer Pool Status. +// The control register is in Slave 7, Settings Bus. + +#define BUFFER_POOL_STATUS_BASE 0xCC00 + +typedef struct { + volatile uint32_t last_line[NBUFFERS]; // last line xfer'd in buffer + volatile uint32_t status; // error and done flags + volatile uint32_t hw_config; // see below + volatile uint32_t dummy[3]; + volatile uint32_t irqs; + volatile uint32_t pri_enc_bp_status; + volatile uint32_t cycle_count; +} buffer_pool_status_t; + +#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE) + +/* + * Buffer n's xfer is done. + * Clear this bit by issuing bp_clear_buf(n) + */ +#define BPS_DONE(n) (0x00000001 << (n)) +#define BPS_DONE_0 BPS_DONE(0) +#define BPS_DONE_1 BPS_DONE(1) +#define BPS_DONE_2 BPS_DONE(2) +#define BPS_DONE_3 BPS_DONE(3) +#define BPS_DONE_4 BPS_DONE(4) +#define BPS_DONE_5 BPS_DONE(5) +#define BPS_DONE_6 BPS_DONE(6) +#define BPS_DONE_7 BPS_DONE(7) + +/* + * Buffer n's xfer had an error. + * Clear this bit by issuing bp_clear_buf(n) + */ +#define BPS_ERROR(n) (0x00000100 << (n)) +#define BPS_ERROR_0 BPS_ERROR(0) +#define BPS_ERROR_1 BPS_ERROR(1) +#define BPS_ERROR_2 BPS_ERROR(2) +#define BPS_ERROR_3 BPS_ERROR(3) +#define BPS_ERROR_4 BPS_ERROR(4) +#define BPS_ERROR_5 BPS_ERROR(5) +#define BPS_ERROR_6 BPS_ERROR(6) +#define BPS_ERROR_7 BPS_ERROR(7) + +/* + * Buffer n is idle. A buffer is idle if it's not + * DONE, ERROR, or processing a transaction. If it's + * IDLE, it's safe to start a new transaction. + * + * Clear this bit by starting a xfer with + * bp_send_from_buf or bp_receive_to_buf. + */ +#define BPS_IDLE(n) (0x00010000 << (n)) +#define BPS_IDLE_0 BPS_IDLE(0) +#define BPS_IDLE_1 BPS_IDLE(1) +#define BPS_IDLE_2 BPS_IDLE(2) +#define BPS_IDLE_3 BPS_IDLE(3) +#define BPS_IDLE_4 BPS_IDLE(4) +#define BPS_IDLE_5 BPS_IDLE(5) +#define BPS_IDLE_6 BPS_IDLE(6) +#define BPS_IDLE_7 BPS_IDLE(7) + +/* + * Buffer n has a "slow path" packet in it. + * This bit is orthogonal to the bits above and indicates that + * the FPGA ethernet rx protocol engine has identified this packet + * as one requiring firmware intervention. + */ +#define BPS_SLOWPATH(n) (0x01000000 << (n)) +#define BPS_SLOWPATH_0 BPS_SLOWPATH(0) +#define BPS_SLOWPATH_1 BPS_SLOWPATH(1) +#define BPS_SLOWPATH_2 BPS_SLOWPATH(2) +#define BPS_SLOWPATH_3 BPS_SLOWPATH(3) +#define BPS_SLOWPATH_4 BPS_SLOWPATH(4) +#define BPS_SLOWPATH_5 BPS_SLOWPATH(5) +#define BPS_SLOWPATH_6 BPS_SLOWPATH(6) +#define BPS_SLOWPATH_7 BPS_SLOWPATH(7) + + +#define BPS_DONE_ALL 0x000000ff // mask of all dones +#define BPS_ERROR_ALL 0x0000ff00 // mask of all errors +#define BPS_IDLE_ALL 0x00ff0000 // mask of all idles +#define BPS_SLOWPATH_ALL 0xff000000 // mask of all slowpaths + +// The hw_config register + +#define HWC_SIMULATION 0x80000000 +#define HWC_WB_CLK_DIV_MASK 0x0000000f + +/*! + * \brief return non-zero if we're running under the simulator + */ +inline static int +hwconfig_simulation_p(void) +{ + return buffer_pool_status->hw_config & HWC_SIMULATION; +} + +/*! + * \brief Return Wishbone Clock divisor. + * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor. + */ +inline static int +hwconfig_wishbone_divisor(void) +{ + return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK; +} + +/////////////////////////////////////////////////// +// Ethernet Core, Slave 6 + +#define ETH_BASE 0xD000 + +#include "eth_mac_regs.h" + +#define eth_mac ((eth_mac_regs_t *) ETH_BASE) + +//////////////////////////////////////////////////// +// Settings Bus, Slave #7, Not Byte Addressable! +// +// Output-only from processor point-of-view. +// 1KB of address space (== 256 32-bit write-only regs) + + +#define MISC_OUTPUT_BASE 0xD400 +#define TX_PROTOCOL_ENGINE_BASE 0xD480 +#define RX_PROTOCOL_ENGINE_BASE 0xD4C0 +#define BUFFER_POOL_CTRL_BASE 0xD500 +#define LAST_SETTING_REG 0xD7FC // last valid setting register + +#define SR_MISC 0 +#define SR_TX_PROT_ENG 32 +#define SR_RX_PROT_ENG 48 +#define SR_BUFFER_POOL_CTRL 64 +#define SR_UDP_SM 96 +#define SR_TX_DSP 208 +#define SR_TX_CTRL 224 +#define SR_RX_DSP 160 +#define SR_RX_CTRL 176 +#define SR_TIME64 192 +#define SR_SIMTIMER 198 +#define SR_LAST 255 + +#define _SR_ADDR(sr) (MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t)) + +// --- buffer pool control regs --- + +typedef struct { + volatile uint32_t ctrl; +} buffer_pool_ctrl_t; + +// buffer pool ports + +#define PORT_SERDES 0 // serial/deserializer +#define PORT_DSP 1 // DSP tx or rx pipeline +#define PORT_ETH 2 // ethernet tx or rx +#define PORT_RAM 3 // RAM tx or rx + +// the buffer pool ctrl register fields + +#define BPC_BUFFER(n) (((n) & 0xf) << 28) +#define BPC_BUFFER_MASK BPC_BUFFER(~0) +#define BPC_BUFFER_0 BPC_BUFFER(0) +#define BPC_BUFFER_1 BPC_BUFFER(1) +#define BPC_BUFFER_2 BPC_BUFFER(2) +#define BPC_BUFFER_3 BPC_BUFFER(3) +#define BPC_BUFFER_4 BPC_BUFFER(4) +#define BPC_BUFFER_5 BPC_BUFFER(5) +#define BPC_BUFFER_6 BPC_BUFFER(6) +#define BPC_BUFFER_7 BPC_BUFFER(7) +#define BPC_BUFFER_NIL BPC_BUFFER(0x8) // disable + +#define BPC_PORT(n) (((n) & 0x7) << 25) +#define BPC_PORT_MASK BPC_PORT(~0) +#define BPC_PORT_SERDES BPC_PORT(PORT_SERDES) +#define BPC_PORT_DSP BPC_PORT(PORT_DSP) +#define BPC_PORT_ETH BPC_PORT(PORT_ETH) +#define BPC_PORT_RAM BPC_PORT(PORT_RAM) +#define BPC_PORT_NIL BPC_PORT(0x4) // disable + +#define BPC_CLR (1 << 24) // mutually excl commands +#define BPC_READ (1 << 23) +#define BPC_WRITE (1 << 22) + +#define BPC_STEP(step) (((step) & 0xf) << 18) +#define BPC_STEP_MASK BPC_STEP(~0) +#define BPC_LAST_LINE(line) (((line) & 0x1ff) << 9) +#define BPC_LAST_LINE_MASK BPC_LAST_LINE(~0) +#define BPC_FIRST_LINE(line) (((line) & 0x1ff) << 0) +#define BPC_FIRST_LINE_MASK BPC_FIRST_LINE(~0) + +#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE) + +// --- misc outputs --- + +typedef struct { + volatile uint32_t clk_ctrl; + volatile uint32_t serdes_ctrl; + volatile uint32_t adc_ctrl; + volatile uint32_t leds; + volatile uint32_t phy_ctrl; // LSB is reset line to eth phy + volatile uint32_t debug_mux_ctrl; + volatile uint32_t ram_page; // FIXME should go somewhere else... + volatile uint32_t flush_icache; // Flush the icache + volatile uint32_t led_src; // HW or SW control for LEDs +} output_regs_t; + +#define SERDES_ENABLE 8 +#define SERDES_PRBSEN 4 +#define SERDES_LOOPEN 2 +#define SERDES_RXEN 1 + +#define ADC_CTRL_ON 0x0F +#define ADC_CTRL_OFF 0x00 + +// crazy order that matches the labels on the case + +#define LED_A (1 << 4) +#define LED_B (1 << 1) +#define LED_C (1 << 3) +#define LED_D (1 << 0) +#define LED_E (1 << 2) +// LED_F // controlled by CPLD +#define LED_RJ45 (1 << 5) + +#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE) + +// --- udp tx regs --- + +typedef struct { + // Bits 19:16 are control info; bits 15:0 are data (see below) + // First two words are unused. + volatile uint32_t _nope[2]; + //--- ethernet header - 14 bytes--- + volatile struct{ + uint32_t mac_dst_0_1; //word 2 + uint32_t mac_dst_2_3; + uint32_t mac_dst_4_5; + uint32_t mac_src_0_1; + uint32_t mac_src_2_3; + uint32_t mac_src_4_5; + uint32_t ether_type; //word 8 + } eth_hdr; + //--- ip header - 20 bytes --- + volatile struct{ + uint32_t ver_ihl_tos; //word 9 + uint32_t total_length; + uint32_t identification; + uint32_t flags_frag_off; + uint32_t ttl_proto; + uint32_t checksum; + uint32_t src_addr_high; + uint32_t src_addr_low; + uint32_t dst_addr_high; + uint32_t dst_addr_low; //word 18 + } ip_hdr; + //--- udp header - 8 bytes --- + volatile struct{ + uint32_t src_port; //word 19 + uint32_t dst_port; + uint32_t length; + uint32_t checksum; //word 22 + } udp_hdr; + volatile uint32_t _pad[32-23]; +} sr_udp_sm_t; + +// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive) + +// This is the last word of the header +#define UDP_SM_LAST_WORD (1 << 19) + +// Insert IP header checksum here. Data is the xor of 16'hFFFF and +// the values written into regs 9-13 and 15-18. +#define UDP_SM_INS_IP_HDR_CHKSUM (1 << 18) + +// Insert IP Length here (data ignored) +#define UDP_SM_INS_IP_LEN (1 << 17) + +// Insert UDP Length here (data ignore) +#define UDP_SM_INS_UDP_LEN (1 << 16) + +#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) + +// --- dsp tx regs --- + +#define MIN_CIC_INTERP 1 +#define MAX_CIC_INTERP 128 + +typedef struct { + volatile uint32_t num_chan; + volatile uint32_t clear_state; // clears out state machine, fifos, +} sr_tx_ctrl_t; + +#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) + +typedef struct { + volatile int32_t freq; + volatile uint32_t scale_iq; // {scale_i,scale_q} + volatile uint32_t interp_rate; + volatile uint32_t _padding0; // padding for the tx_mux + // NOT freq, scale, interp + /*! + * \brief output mux configuration. + * + * <pre> + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------------------------------+-------+-------+-------+-------+ + * | | DAC1 | DAC0 | + * +-------------------------------+-------+-------+-------+-------+ + * + * There are N DUCs (1 now) with complex inputs and outputs. + * There are two DACs. + * + * Each 4-bit DACx field specifies the source for the DAC + * Each subfield is coded like this: + * + * 3 2 1 0 + * +-------+ + * | N | + * +-------+ + * + * N specifies which DUC output is connected to this DAC. + * + * N which interp output + * --- ------------------- + * 0 DUC 0 I + * 1 DUC 0 Q + * 2 DUC 1 I + * 3 DUC 1 Q + * F All Zeros + * + * The default value is 0x10 + * </pre> + */ + volatile uint32_t tx_mux; + +} dsp_tx_regs_t; + +#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) + +// --- VITA RX CTRL regs --- +typedef struct { + // The following 3 are logically a single command register. + // They are clocked into the underlying fifo when time_ticks is written. + volatile uint32_t cmd; // {now, chain, num_samples(30) + volatile uint32_t time_secs; + volatile uint32_t time_ticks; + + volatile uint32_t clear_overrun; // write anything to clear overrun + volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter + volatile uint32_t vrt_stream_id; // word 1 of packet. + volatile uint32_t vrt_trailer; + volatile uint32_t nsamples_per_pkt; + volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources + volatile uint32_t pad[7]; // Make each structure 16 elements long +} sr_rx_ctrl_t; + +#define MK_RX_CMD(nsamples, now, chain) \ + ((((now) & 0x1) << 31) | ((chain & 0x1) << 30) | ((nsamples) & 0x3fffffff)) + +#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) + +// --- dsp rx regs --- +#define MIN_CIC_DECIM 1 +#define MAX_CIC_DECIM 128 + +typedef struct { + volatile int32_t freq; + volatile uint32_t scale_iq; // {scale_i,scale_q} + volatile uint32_t decim_rate; + volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, + // otherwise it is automatic + volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits + + /*! + * \brief input mux configuration. + * + * This determines which ADC (or constant zero) is connected to + * each DDC input. There are N DDCs (1 now). Each has two inputs. + * + * <pre> + * Mux value: + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | |Q0 |I0 | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) + * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) + * + * The default value is 0x4 + * </pre> + */ + volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v + + /*! + * \brief Streaming GPIO configuration + * + * This determines whether the LSBs of I and Q samples come from the DSP + * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first + * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] + * configured as inputs. The GPIO pins will be sampled at the time the + * remainder of the DSP sample is strobed into the RX sample FIFO. There + * will be a decimation-dependent fixed time offset between the GPIO + * sample stream and the associated RF samples. + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | MBZ |Q|I| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * I 0=LSB comes from DSP pipeline (default) + * 1=LSB comes from io_rx[15] + * + * Q 0=LSB comes from DSP pipeline (default) + * 1=LSB comes from io_rx[14] + */ + volatile uint32_t gpio_stream_enable; + +} dsp_rx_regs_t; + +#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) + +// ---------------------------------------------------------------- +// VITA49 64 bit time (write only) + /*! + * \brief Time 64 flags + * + * <pre> + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------------------+-+-+ + * | |S|P| + * +-----------------------------------------------------------+-+-+ + * + * P - PPS edge selection (0=negedge, 1=posedge, default=0) + * S - Source (0=sma, 1=mimo, 0=default) + * + * </pre> + */ +typedef struct { + volatile uint32_t secs; // value to set absolute secs to on next PPS + volatile uint32_t ticks; // value to set absolute ticks to on next PPS + volatile uint32_t flags; // flags - see chart above + volatile uint32_t imm; // set immediate (0=latch on next pps, 1=latch immediate, default=0) +} sr_time64_t; + +#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64)) + + +/* + * --- ethernet tx protocol engine regs (write only) --- + * + * These registers control the transmit portion of the ethernet + * protocol engine (out of USRP2). The protocol engine handles fifo + * status and sequence number insertion in outgoing packets, and + * automagically generates status packets when required to inform the + * host of changes in fifo availability. + * + * All outgoing packets have their fifo_status field set to the number + * of 32-bit lines of fifo available in the ethernet Rx fifo (see + * usrp2_eth_packet.h). Seqno's are set if FIXME, else 0. + * + * FIXME clean this up once we know how it's supposed to behave. + */ + +typedef struct { + volatile uint32_t flags; // not yet fully defined (channel?) + volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr + volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr + volatile uint32_t mac_src2345; // 4 bytes of destination mac addr + volatile uint32_t seqno; // Write to init seqno. It autoincs on match +} tx_proto_engine_regs_t; + +#define tx_proto_engine ((tx_proto_engine_regs_t *) TX_PROTOCOL_ENGINE_BASE) + +/* + * --- ethernet rx protocol engine regs (write only) --- + * + * These registers control the receive portion of the ethernet + * protocol engine (into USRP2). The protocol engine offloads common + * packet inspection operations so that firmware has less to do on + * "fast path" packets. + * + * The registers define conditions which must be matched for a packet + * to be considered a "fast path" packet. If a received packet + * matches the src and dst mac address, ethertype, flags field, and + * expected seqno number it is considered a "fast path" packet, and + * the expected seqno is updated. If the packet fails to satisfy any + * of the above conditions it's a "slow path" packet, and the + * corresponding SLOWPATH flag will be set buffer_status register. + */ + +typedef struct { + volatile uint32_t flags; // not yet fully defined (channel?) + volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr + volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr + volatile uint32_t mac_src2345; // 4 bytes of destination mac addr + volatile uint32_t ethertype_pad; // ethertype in high 16-bits +} rx_proto_engine_regs_t; + +#define rx_proto_engine ((rx_proto_engine_regs_t *) RX_PROTOCOL_ENGINE_BASE) + + + +/////////////////////////////////////////////////// +// Simple Programmable Interrupt Controller, Slave 8 + +#define PIC_BASE 0xD800 + +// Interrupt request lines +// Bit numbers (LSB == 0) that correpond to interrupts into PIC + +#define IRQ_BUFFER 0 // buffer manager +#define IRQ_ONETIME 1 +#define IRQ_SPI 2 +#define IRQ_I2C 3 +#define IRQ_PHY 4 // ethernet PHY +#define IRQ_UNDERRUN 5 +#define IRQ_OVERRUN 6 +#define IRQ_PPS 7 // pulse per second +#define IRQ_UART_RX 8 +#define IRQ_UART_TX 9 +#define IRQ_SERDES 10 +#define IRQ_CLKSTATUS 11 +#define IRQ_PERIODIC 12 + +#define IRQ_TO_MASK(x) (1 << (x)) + +#define PIC_BUFFER_INT IRQ_TO_MASK(IRQ_BUFFER) +#define PIC_ONETIME_INT IRQ_TO_MASK(IRQ_ONETIME) +#define PIC_SPI_INT IRQ_TO_MASK(IRQ_SPI) +#define PIC_I2C_INT IRQ_TO_MASK(IRQ_I2C) +#define PIC_PHY_INT IRQ_TO_MASK(IRQ_PHY) +#define PIC_UNDERRUN_INT IRQ_TO_MASK(IRQ_UNDERRUN) +#define PIC_OVERRUN_INT IRQ_TO_MASK(IRQ_OVERRUN) +#define PIC_PPS_INT IRQ_TO_MASK(IRQ_PPS) +#define PIC_UART_RX_INT IRQ_TO_MASK(IRQ_UART_RX) +#define PIC_UART_TX_INT IRQ_TO_MASK(IRQ_UART_TX) +#define PIC_SERDES IRQ_TO_MASK(IRQ_SERDES) +#define PIC_CLKSTATUS IRQ_TO_MASK(IRQ_CLKSTATUS) + +typedef struct { + volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level + volatile uint32_t polarity; // mask: 1 -> rising edge + volatile uint32_t mask; // mask: 1 -> disabled + volatile uint32_t pending; // mask: 1 -> pending; write 1's to clear pending ints +} pic_regs_t; + +#define pic_regs ((pic_regs_t *) PIC_BASE) + +// ---------------------------------------------------------------- +// WB_CLK_RATE is the time base for this +typedef struct { + volatile uint32_t onetime; // Number of wb clk cycles till the onetime interrupt + volatile uint32_t periodic; // Repeat rate of periodic interrupt +} sr_simple_timer_t; + +#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER)) + +/////////////////////////////////////////////////// +// UART, Slave 10 + +#define UART_BASE 0xE000 + +typedef struct { + // All elements are 8 bits except for clkdiv (16), but we use uint32 to make + // the hardware for decoding easier + volatile uint32_t clkdiv; // Set to 50e6 divided by baud rate (no x16 factor) + volatile uint32_t txlevel; // Number of spaces in the FIFO for writes + volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads + volatile uint32_t txchar; // Write characters to be sent here + volatile uint32_t rxchar; // Read received characters here +} uart_regs_t; + +#define uart_regs ((uart_regs_t *) UART_BASE) + +/////////////////////////////////////////////////// +// ATR Controller, Slave 11 + +#define ATR_BASE 0xE400 + +typedef struct { + volatile uint32_t v[16]; +} atr_regs_t; + +#define ATR_IDLE 0x0 // indicies into v +#define ATR_TX 0x1 +#define ATR_RX 0x2 +#define ATR_FULL 0x3 + +#define atr_regs ((atr_regs_t *) ATR_BASE) + +/////////////////////////////////////////////////// +// SD Card SPI interface, Slave 13 +// All regs are 8 bits wide, but are accessed as if they are 32 bits + +#define SDSPI_BASE 0xEC00 + +typedef struct { + volatile uint32_t status; // Write a 1 or 0 for controlling CS + volatile uint32_t clkdiv; + volatile uint32_t send_dat; + volatile uint32_t receive_dat; +} sdspi_regs_t; + +#define sdspi_regs ((sdspi_regs_t *) SDSPI_BASE) + +/////////////////////////////////////////////////// +// External RAM interface, Slave 14 +// Pages are 1K. Page is 10 bits, set by a control register +// output_regs->ram_page + +#define EXTRAM_BASE 0xF000 +#define extram ((volatile uint32_t *) EXTRAM_BASE) + + +/////////////////////////////////////////////////// + +#endif + diff --git a/firmware/microblaze/lib/memset_wa.c b/firmware/microblaze/lib/memset_wa.c new file mode 100644 index 000000000..da5da21ab --- /dev/null +++ b/firmware/microblaze/lib/memset_wa.c @@ -0,0 +1,45 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "memset_wa.h" +#include <stdint.h> +#include <stdlib.h> + +/* + * For setting non-byte-adressable memory, such as + * the buffers. dst and nbytes must all satisfy (x % 4 == 0) + */ +void * +memset_wa(void *dst, int c, size_t nbytes) +{ + if (((intptr_t) dst & 0x3) + || (nbytes & 0x3)) + exit(1); /* die! */ + + int *dp = (int *) dst; + + c &= 0xff; + int v = (c << 24) | (c << 16) | (c << 8) | c; + unsigned nw = nbytes/4; + + unsigned i; + for (i = 0; i < nw; i++) + dp[i] = v; + + return dst; +} diff --git a/firmware/microblaze/lib/memset_wa.h b/firmware/microblaze/lib/memset_wa.h new file mode 100644 index 000000000..46d903d53 --- /dev/null +++ b/firmware/microblaze/lib/memset_wa.h @@ -0,0 +1,27 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_MEMSET_WA_H +#define INCLUDED_MEMSET_WA_H + +#include <stdlib.h> + +void *memset_wa(void *s, int c, size_t n); + + +#endif /* INCLUDED_MEMSET_WA_H */ diff --git a/firmware/microblaze/lib/microblaze.ld b/firmware/microblaze/lib/microblaze.ld new file mode 100644 index 000000000..ef816cf2e --- /dev/null +++ b/firmware/microblaze/lib/microblaze.ld @@ -0,0 +1,163 @@ +OUTPUT_FORMAT("elf32-microblaze", "", "") +/* SEARCH_DIR(/home/jwilliams/tmp/microblaze-toolchain-sources/release/lin/microblaze//lib);*/ + +ENTRY(_start) + +MEMORY { + flatmem : ORIGIN = 0x0, LENGTH = 0x00008000 /* 32KB */ +} + +SECTIONS +{ + _TEXT_START_ADDR = DEFINED(_TEXT_START_ADDR) ? _TEXT_START_ADDR : 0x50; + .vectors.reset 0x0 : { *(.vectors.reset) } > flatmem + .vectors.sw_exception 0x8 : { *(.vectors.sw_exception) } > flatmem + .vectors.interrupt 0x10 : { *(.vectors.interrupt) } > flatmem + .vectors.hw_exception 0x20 : { *(.vectors.hw_exception) } >flatmem + . = _TEXT_START_ADDR; + _ftext = .; + .text : { + *(.text) + *(.text.*) + *(.gnu.linkonce.t.*) + } > flatmem + _etext = .; + .init : { KEEP (*(.init)) } > flatmem =0 + .fini : { KEEP (*(.fini)) } > flatmem =0 + PROVIDE (__CTOR_LIST__ = .); + PROVIDE (___CTOR_LIST__ = .); + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } > flatmem + PROVIDE (__CTOR_END__ = .); + PROVIDE (___CTOR_END__ = .); + PROVIDE (__DTOR_LIST__ = .); + PROVIDE (___DTOR_LIST__ = .); + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } > flatmem + PROVIDE (__DTOR_END__ = .); + PROVIDE (___DTOR_END__ = .); + . = ALIGN(4); + _frodata = . ; + .rodata : { + *(.rodata) + *(.gnu.linkonce.r.*) + CONSTRUCTORS; /* Is this needed? */ + } > flatmem + _erodata = .; + /* Alignments by 8 to ensure that _SDA2_BASE_ on a word boundary */ + /* Note that .sdata2 and .sbss2 must be contiguous */ + . = ALIGN(8); + _ssrw = .; + .sdata2 : { + *(.sdata2) + *(.gnu.linkonce.s2.*) + } > flatmem + . = ALIGN(4); + .sbss2 : { + PROVIDE (__sbss2_start = .); + *(.sbss2) + *(.gnu.linkonce.sb2.*) + PROVIDE (__sbss2_end = .); + } > flatmem + . = ALIGN(8); + _essrw = .; + _ssrw_size = _essrw - _ssrw; + PROVIDE (_SDA2_BASE_ = _ssrw + (_ssrw_size / 2 )); + . = ALIGN(4); + _fdata = .; + .data : { + *(.data) + *(.gnu.linkonce.d.*) + CONSTRUCTORS; /* Is this needed? */ + } > flatmem + _edata = . ; + /* Added to handle pic code */ + .got : { + *(.got) + } > flatmem + .got1 : { + *(.got1) + } > flatmem + .got2 : { + *(.got2) + } > flatmem + /* Added by Sathya to handle C++ exceptions */ + .eh_frame : { + *(.eh_frame) + } > flatmem + .jcr : { + *(.jcr) + } > flatmem + .gcc_except_table : { + *(.gcc_except_table) + } > flatmem + /* Alignments by 8 to ensure that _SDA_BASE_ on a word boundary */ + /* Note that .sdata and .sbss must be contiguous */ + . = ALIGN(8); + _ssro = .; + .sdata : { + *(.sdata) + *(.gnu.linkonce.s.*) + } > flatmem + . = ALIGN(4); + .sbss : { + PROVIDE (__sbss_start = .); + *(.sbss) + *(.gnu.linkonce.sb.*) + PROVIDE (__sbss_end = .); + } > flatmem + . = ALIGN(8); + _essro = .; + _ssro_size = _essro - _ssro; + PROVIDE (_SDA_BASE_ = _ssro + (_ssro_size / 2 )); + . = ALIGN(4); + _fbss = .; + .bss : { + PROVIDE (__bss_start = .); + *(.bss) + *(.gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(4); + PROVIDE (__bss_end = .); + _heap = .; + _HEAP_SIZE = DEFINED(_HEAP_SIZE) ? _HEAP_SIZE : 0x0; + _STACK_SIZE = DEFINED(_STACK_SIZE) ? _STACK_SIZE : 0x800; + . += _HEAP_SIZE; + _heap_end = .; + . += _STACK_SIZE; + . = ALIGN(8); + _stack = .; + _end = .; + } > flatmem + .tdata : { + *(.tdata) + *(.gnu.linkonce.td.*) + } > flatmem + .tbss : { + *(.tbss) + *(.gnu.linkonce.tb.*) + } > flatmem +} diff --git a/firmware/microblaze/lib/nonstdio.c b/firmware/microblaze/lib/nonstdio.c new file mode 100644 index 000000000..1c991afee --- /dev/null +++ b/firmware/microblaze/lib/nonstdio.c @@ -0,0 +1,80 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <nonstdio.h> + +static const char hex[16] = "0123456789ABCDEF"; + +// %x +void +puthex4(unsigned long x) +{ + putchar(hex[x & 0xf]); +} + +// %02x +void +puthex8(unsigned long x) +{ + putchar(hex[(x >> 4) & 0xf]); + putchar(hex[x & 0xf]); +} + +// %04x +void +puthex16(unsigned long x) +{ + puthex8(x >> 8); + puthex8(x); +} + +// %08x +void +puthex32(unsigned long x) +{ + puthex16(x >> 16); + puthex16(x); +} + +void +puthex4_nl(unsigned long x) +{ + puthex4(x); + newline(); +} + +void +puthex8_nl(unsigned long x) +{ + puthex8(x); + newline(); +} + +void +puthex16_nl(unsigned long x) +{ + puthex16(x); + newline(); +} + +void +puthex32_nl(unsigned long x) +{ + puthex32(x); + newline(); +} diff --git a/firmware/microblaze/lib/nonstdio.h b/firmware/microblaze/lib/nonstdio.h new file mode 100644 index 000000000..3fd9e39bb --- /dev/null +++ b/firmware/microblaze/lib/nonstdio.h @@ -0,0 +1,46 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_NONSTDIO_H +#define INCLUDED_NONSTDIO_H + +#include <stdio.h> +#include <usrp2_types.h> +#include <stddef.h> + +void putstr(const char *s); // cf puts, no added newline +void puthex4(unsigned long x); // output 1 hex digit +void puthex8(unsigned long x); // output 2 hex digits +void puthex16(unsigned long x); // output 4 hex digits +void puthex32(unsigned long x); // output 8 hex digits +void puthex4_nl(unsigned long x); // ... followed by newline +void puthex8_nl(unsigned long x); +void puthex16_nl(unsigned long x); +void puthex32_nl(unsigned long x); +#define puthex puthex32 +#define puthex_nl puthex32_nl +void newline(); // putchar('\n') + +void print_mac_addr(const unsigned char addr[6]); +void print_fxpt_freq(u2_fxpt_freq_t v); +void print_fxpt_gain(u2_fxpt_gain_t v); +void print_uint64(uint64_t v); + +void print_buffer(uint32_t *buf, size_t n); + +#endif /* INCLUDED_NONSTDIO_H */ diff --git a/firmware/microblaze/lib/pic.c b/firmware/microblaze/lib/pic.c new file mode 100644 index 000000000..4575bd775 --- /dev/null +++ b/firmware/microblaze/lib/pic.c @@ -0,0 +1,94 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "pic.h" +#include "hal_io.h" +#include "memory_map.h" + + +#define NVECTORS 8 + +/* + * Our secondary interrupt vector. + */ +irq_handler_t pic_vector[NVECTORS] = { + nop_handler, + nop_handler, + nop_handler, + nop_handler, + nop_handler, + nop_handler, + nop_handler, + nop_handler +}; + + +void +pic_init(void) +{ + // uP is level triggered + + pic_regs->mask = ~0; // mask all interrupts + pic_regs->edge_enable = PIC_ONETIME_INT | PIC_PHY_INT; + pic_regs->polarity = ~0 & ~PIC_PHY_INT; // rising edge + pic_regs->pending = ~0; // clear all pending ints +} + +/* + * This magic gets pic_interrupt_handler wired into the + * system interrupt handler with the appropriate prologue and + * epilogue. + */ +void pic_interrupt_handler() __attribute__ ((interrupt_handler)); + +void pic_interrupt_handler() +{ + // pending and not masked interrupts + int live = pic_regs->pending & ~pic_regs->mask; + + // FIXME loop while there are interrupts to service. + // That will reduce our overhead. + + // handle the first one set + int i; + int mask; + for (i=0, mask=1; i < NVECTORS; i++, mask <<= 1){ + if (mask & live){ // handle this one + // puthex_nl(i); + (*pic_vector[i])(i); + pic_regs->pending = mask; // clear pending interrupt + return; + } + } +} + +void +pic_register_handler(unsigned irq, irq_handler_t handler) +{ + if (irq >= NVECTORS) + return; + pic_vector[irq] = handler; + + pic_regs->mask &= ~IRQ_TO_MASK(irq); +} + +void +nop_handler(unsigned irq) +{ + // nop +} diff --git a/firmware/microblaze/lib/pic.h b/firmware/microblaze/lib/pic.h new file mode 100644 index 000000000..68918f9ad --- /dev/null +++ b/firmware/microblaze/lib/pic.h @@ -0,0 +1,35 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_PIC_H +#define INCLUDED_PIC_H + +typedef void (*irq_handler_t)(unsigned irq); + +void pic_init(void); +void pic_register_handler(unsigned irq, irq_handler_t handler); + +void nop_handler(unsigned irq); // default handler does nothing + +// FIXME inline assembler +int pic_disable_interrupts(); +int pic_enable_interrupts(); +void pic_restore_interrupts(int prev_status); + + +#endif /* INCLUDED_PIC_H */ diff --git a/firmware/microblaze/lib/print_buffer.c b/firmware/microblaze/lib/print_buffer.c new file mode 100644 index 000000000..9f9104bb5 --- /dev/null +++ b/firmware/microblaze/lib/print_buffer.c @@ -0,0 +1,36 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <nonstdio.h> + +void +print_buffer(uint32_t *buf, size_t n) +{ + size_t i; + for (i = 0; i < n; i++){ + if (i % 4 == 0) + puthex16(i * 4); + + putchar(' '); + puthex32(buf[i]); + if (i % 4 == 3) + newline(); + } + + newline(); +} + diff --git a/firmware/microblaze/lib/print_fxpt.c b/firmware/microblaze/lib/print_fxpt.c new file mode 100644 index 000000000..185bbc51b --- /dev/null +++ b/firmware/microblaze/lib/print_fxpt.c @@ -0,0 +1,83 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <nonstdio.h> + +/* + * print uint64_t + */ +void +print_uint64(uint64_t u) +{ + const char *_hex = "0123456789ABCDEF"; + if (u >= 10) + print_uint64(u/10); + putchar(_hex[u%10]); +} + +static void +print_thousandths(int thousandths) +{ + putchar('.'); + if (thousandths < 100) + putchar('0'); + if (thousandths < 10) + putchar('0'); + printf("%d", thousandths); +} + + +void +print_fxpt_freq(u2_fxpt_freq_t v) +{ + if (v < 0){ + v = -v; + putchar('-'); + } + + int64_t int_part = v >> 20; + int32_t frac_part = v & ((1 << 20) - 1); + +#if 0 + // would work, if we had it + printf("%lld.%03d", int_part, (frac_part * 1000) >> 20); +#else + print_uint64(int_part); + print_thousandths((frac_part * 1000) >> 20); +#endif +} + +void +print_fxpt_gain(u2_fxpt_gain_t v) +{ + if (v < 0){ + v = -v; + putchar('-'); + } + + int32_t int_part = v >> 7; + int32_t frac_part = v & ((1 << 7) - 1); + +#if 0 + // would work, if we had it + printf("%d.%03d", int_part, (frac_part * 1000) >> 7); +#else + printf("%d", int_part); + print_thousandths((frac_part * 1000) >> 7); +#endif +} + diff --git a/firmware/microblaze/lib/print_mac_addr.c b/firmware/microblaze/lib/print_mac_addr.c new file mode 100644 index 000000000..838fd614a --- /dev/null +++ b/firmware/microblaze/lib/print_mac_addr.c @@ -0,0 +1,30 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "nonstdio.h" + +void +print_mac_addr(const unsigned char addr[6]) +{ + puthex8(addr[0]); putchar(':'); + puthex8(addr[1]); putchar(':'); + puthex8(addr[2]); putchar(':'); + puthex8(addr[3]); putchar(':'); + puthex8(addr[4]); putchar(':'); + puthex8(addr[5]); +} + diff --git a/firmware/microblaze/lib/print_rmon_regs.c b/firmware/microblaze/lib/print_rmon_regs.c new file mode 100644 index 000000000..6d9986909 --- /dev/null +++ b/firmware/microblaze/lib/print_rmon_regs.c @@ -0,0 +1,44 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "print_rmon_regs.h" +#include "eth_mac.h" +#include "nonstdio.h" + +void +print_rmon_regs(void) +{ + int i; + for (i=0; i <= 0x10; i++){ + putstr("RMON[0x"); + puthex8(i); + putstr("] = "); + printf("%d\n", eth_mac_read_rmon(i)); + } + + for (i=0x20; i <= 0x30; i++){ + putstr("RMON[0x"); + puthex8(i); + putstr("] = "); + printf("%d\n", eth_mac_read_rmon(i)); + } +} diff --git a/firmware/microblaze/lib/print_rmon_regs.h b/firmware/microblaze/lib/print_rmon_regs.h new file mode 100644 index 000000000..44e52da84 --- /dev/null +++ b/firmware/microblaze/lib/print_rmon_regs.h @@ -0,0 +1,24 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_PRINT_RMON_REGS_H +#define INCLUDED_PRINT_RMON_REGS_H + +void print_rmon_regs(void); + +#endif /* INCLUDED_PRINT_RMON_REGS_H */ diff --git a/firmware/microblaze/lib/printf.c b/firmware/microblaze/lib/printf.c new file mode 100644 index 000000000..45bd57cb9 --- /dev/null +++ b/firmware/microblaze/lib/printf.c @@ -0,0 +1,134 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * Based on code from the SDCC z80 library ;) + */ + +#include <stdarg.h> +#include <stdio.h> + +static void +_printn(unsigned u, unsigned base, char issigned, + void (*emitter)(char, void *), void *pData) +{ + const char *_hex = "0123456789ABCDEF"; + if (issigned && ((int)u < 0)) { + (*emitter)('-', pData); + u = (unsigned)-((int)u); + } + if (u >= base) + _printn(u/base, base, 0, emitter, pData); + (*emitter)(_hex[u%base], pData); +} + +static void +_printf(const char *format, void (*emitter)(char, void *), + void *pData, va_list va) +{ + while (*format) { + if (*format != '%') + (*emitter)(*format, pData); + else { + switch (*++format) { + case 0: /* hit end of format string */ + return; + case 'c': + { + char c = (char)va_arg(va, int); + (*emitter)(c, pData); + break; + } + case 'u': + { + unsigned u = va_arg(va, unsigned); + _printn(u, 10, 0, emitter, pData); + break; + } + case 'd': + { + unsigned u = va_arg(va, unsigned); + _printn(u, 10, 1, emitter, pData); + break; + } + case 'x': + case 'p': + { + unsigned u = va_arg(va, unsigned); + _printn(u, 16, 0, emitter, pData); + break; + } + case 's': + { + char *s = va_arg(va, char *); + while (*s) { + (*emitter)(*s, pData); + s++; + } + break; + } + } + } + format++; + } +} + +static void +_char_emitter(char c, void *pData __attribute__((unused))) +{ + putchar(c); +} + +int +printf(const char *format, ...) +{ + va_list va; + va_start(va, format); + + _printf(format, _char_emitter, NULL, va); + + va_end(va); + + // wrong return value... + return 0; +} + + +#if 0 + +// Totally dangerous. Don't use +static void +_buf_emitter(char c, void *pData) +{ + *((*((char **)pData)))++ = c; +} + +int sprintf(char *pInto, const char *format, ...) +{ + va_list va; + va_start(va, format); + + _printf(format, _buf_emitter, &pInto, va); + *pInto++ = '\0'; + + va_end(va); + + // FIXME wrong return value + return 0; +} +#endif diff --git a/firmware/microblaze/lib/printf.c.smaller b/firmware/microblaze/lib/printf.c.smaller new file mode 100644 index 000000000..4d858648d --- /dev/null +++ b/firmware/microblaze/lib/printf.c.smaller @@ -0,0 +1,134 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * Based on code from the SDCC z80 library ;) + */ + +#include <stdarg.h> +#include <stdio.h> +#include <hal_io.h> /* FIXME refactor into stdio */ + +#define PUTCHAR(x) hal_putc(x) + + +static void +_printn(unsigned u, unsigned base, char issigned) +{ + const char *_hex = "0123456789ABCDEF"; + if (issigned && ((int)u < 0)) { + PUTCHAR('-'); + u = (unsigned)-((int)u); + } + if (u >= base) + _printn(u/base, base, 0); + PUTCHAR(_hex[u%base]); +} + +static void +_printf(const char *format, va_list va) +{ + while (*format) { + if (*format != '%') + PUTCHAR(*format); + else { + switch (*++format) { + case 0: /* hit end of format string */ + return; + case 'c': + { + char c = (char)va_arg(va, int); + PUTCHAR(c); + break; + } + case 'u': + { + unsigned u = va_arg(va, unsigned); + _printn(u, 10, 0); + break; + } + case 'd': + { + unsigned u = va_arg(va, unsigned); + _printn(u, 10, 1); + break; + } + case 'x': + case 'p': + { + unsigned u = va_arg(va, unsigned); + _printn(u, 16, 0); + break; + } + case 's': + { + char *s = va_arg(va, char *); + while (*s) { + PUTCHAR(*s); + s++; + } + break; + } + } + } + format++; + } +} + +#if 0 +static void +_char_emitter(char c, void *pData __attribute__((unused))) +{ + hal_putc(c); +} +#endif + +int +printf(const char *format, ...) +{ + va_list va; + va_start(va, format); + + _printf(format, va); + + // wrong return value... + return 0; +} + + +#if 0 + +// Totally dangerous. Don't use +static void +_buf_emitter(char c, void *pData) +{ + *((*((char **)pData)))++ = c; +} + +int sprintf(char *pInto, const char *format, ...) +{ + va_list va; + va_start(va, format); + + _printf(format, _buf_emitter, &pInto, va); + *pInto++ = '\0'; + + // FIXME wrong return value + return 0; +} +#endif diff --git a/firmware/microblaze/lib/sd.c b/firmware/microblaze/lib/sd.c new file mode 100644 index 000000000..d000b28ae --- /dev/null +++ b/firmware/microblaze/lib/sd.c @@ -0,0 +1,197 @@ +/* -*- c -*- */ +/* + * Copyright 2008 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "sd.h" +#include "memory_map.h" +#include "stdint.h" +#include "stdio.h" + +static inline void +sd_packarg(unsigned char *argument,unsigned int value) +{ + argument[3] = (unsigned char)(value >> 24); + argument[2] = (unsigned char)(value >> 16); + argument[1] = (unsigned char)(value >> 8); + argument[0] = (unsigned char)(value); +} + +int +sd_init(void) +{ + unsigned char response[5]; + unsigned char argument[4]; + int i,j; + + for(i=0;i<4;i++) + argument[i] = 0; + + // Set clock to less than 400 kHz to start out + sdspi_regs->clkdiv = 128; + + // Delay at least 74 cycles + sd_assert_cs(); + for(i = 0; i < 100; i++) + sd_send_byte(SD_IDLE); + sd_deassert_cs(); + + // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58 + // Put card in idle state + if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0) + return 0; // Something went wrong in command + + j = 0; + do { + j++; + if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1) + sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument); + else + j = SD_IDLE_WAIT_MAX; + } + while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX)); + + if(j>= SD_IDLE_WAIT_MAX) // IDLE timeout exceeded, card asleep + return 0; + + // CMD58 reads the SD card capabilities + if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0) + return 0; // CMD58 FAIL + + if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33) + return 0; // Card doesn't do 3.3V + + //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]); + + // Set blocklen here + sd_packarg(argument,SD_BLOCKLEN); + if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0) + return 0; // Set Blocklen failed + + // Reset back to high speed + sdspi_regs->clkdiv = 4; + //puts("finished init\n"); + return 1; +} + +int sd_send_command(unsigned char cmd,unsigned char response_type, + unsigned char *response,unsigned char *argument) +{ + int i; + char response_length; + unsigned char tmp; + + sd_assert_cs(); + sd_send_byte((cmd & 0x3F) | 0x40); + for(i=3;i>=0;i--) + sd_send_byte(argument[i]); + sd_send_byte(SD_CRC); // Always the same + + response_length = 0; + switch(response_type) + { + case SD_R1: + case SD_R1B: + response_length = 1; + break; + case SD_R2: + response_length = 2; + break; + case SD_R3: + response_length = 5; + break; + default: + break; + } + + // Wait for a response, which will have a 0 start bit + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT); + + if(i>= SD_CMD_TIMEOUT) + { + sd_deassert_cs(); + //puts("cmd send timeout\n"); + return 0; + } + + for(i=response_length-1; i>=0; i--) + { + response[i] = tmp; + tmp = sd_rcv_byte(); + } + i = 0; + if(response_type == SD_R1B) + { + do + { + i++; + tmp = sd_rcv_byte(); + } + while(tmp != SD_IDLE); + sd_send_byte(SD_IDLE); + } + + //puts("send cmd success\n"); + sd_deassert_cs(); + return 1; +} + +int +sd_read_block (unsigned int blockaddr, unsigned char *buf) +{ + unsigned char response[5]; + unsigned char argument[4]; + unsigned int i = 0; + unsigned char tmp; + + blockaddr <<= SD_BLOCKLEN_NBITS; + sd_packarg(argument,blockaddr); + if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0) + return 0; //Failed READ; + if(response[0] != 0) + return 0; //Misaligned READ + + sd_assert_cs(); + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while((tmp == 0xFF) && (i < SD_RD_TIMEOUT)); + if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0)) + { + sd_send_byte(SD_IDLE); // Send a dummy before quitting + return 0; // Data ERROR + } + for(i=0;i<SD_BLOCKLEN;i++) + buf[i] = sd_rcv_byte(); + return 1; + +} + +int +sd_write_block(unsigned int blockaddr, const unsigned char *buf) +{ + // FIXME not implemented yet + return 0; +} diff --git a/firmware/microblaze/lib/sd.h b/firmware/microblaze/lib/sd.h new file mode 100644 index 000000000..e2d0ae38e --- /dev/null +++ b/firmware/microblaze/lib/sd.h @@ -0,0 +1,122 @@ +/* -*- c -*- */ +/* + * Copyright 2008 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_SD_H +#define INCLUDED_SD_H + +#include "memory_map.h" + +#define SD_READY 1 +#define SD_IDLE_WAIT_MAX 100 +#define SD_CMD_TIMEOUT 100 +#define SD_RD_TIMEOUT 1000 + +#define SD_CMD0 0 +#define SD_CMD1 1 +#define SD_CMD9 9 +#define SD_CMD10 10 +#define SD_CMD12 12 +#define SD_CMD13 13 +#define SD_CMD16 16 +#define SD_CMD17 17 +#define SD_CMD18 18 +#define SD_CMD24 24 +#define SD_CMD25 25 +#define SD_CMD27 27 +#define SD_CMD28 28 +#define SD_CMD29 29 +#define SD_CMD30 30 +#define SD_CMD32 32 +#define SD_CMD33 33 +#define SD_CMD38 38 +#define SD_CMD55 55 +#define SD_CMD58 58 +#define SD_CMD59 59 +#define SD_ACMD41 41 +#define SD_IDLE 0xFF +#define SD_CRC 0x95 + +#define SD_R1 1 +#define SD_R1B 2 +#define SD_R2 3 +#define SD_R3 4 + +#define SD_CMD0_R SD_R1 +#define SD_CMD16_R SD_R1 +#define SD_CMD17_R SD_R1 +#define SD_CMD55_R SD_R1 +#define SD_ACMD41_R SD_R1 +#define SD_CMD58_R SD_R3 + +#define SD_BLOCKLEN 512 +#define SD_BLOCKLEN_NBITS 9 + +#define SD_MSK_IDLE 0x01 +#define SD_MSK_OCR_33 0xC0 +#define SD_MSK_TOK_DATAERROR 0xE0 + + +int sd_init(void); + +static inline void +sd_assert_cs(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->status = 1; +} + +static inline void +sd_deassert_cs(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->status = 0; +} + +static inline char +sd_rcv_byte(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->send_dat = SD_IDLE; + while(sdspi_regs->status != SD_READY) + ; + return sdspi_regs-> receive_dat; +} + +static inline void +sd_send_byte(char dat) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; // Wait for status = 1 (ready) + sdspi_regs->send_dat = dat; +} + + +int sd_send_command(unsigned char cmd,unsigned char response_type, + unsigned char *response,unsigned char *argument); + +int sd_read_block (unsigned int blockaddr, unsigned char *buf); +int sd_write_block(unsigned int blockaddr, const unsigned char *buf); + +#endif /* INCLUDED_SD_H */ diff --git a/firmware/microblaze/lib/spi.c b/firmware/microblaze/lib/spi.c new file mode 100644 index 000000000..937397df6 --- /dev/null +++ b/firmware/microblaze/lib/spi.c @@ -0,0 +1,61 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "spi.h" +#include "memory_map.h" + +void +spi_init(void) +{ + /* + * f_sclk = f_wb / ((div + 1) * 2) + */ + spi_regs->div = 1; // 0 = Div by 2 (25 MHz); 1 = Div-by-4 (12.5 MHz) +} + +void +spi_wait(void) +{ + while (spi_regs->ctrl & SPI_CTRL_GO_BSY) + ; +} + +uint32_t +spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags) +{ + flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG); + int ctrl = SPI_CTRL_ASS | (SPI_CTRL_CHAR_LEN_MASK & length) | flags; + + spi_wait(); + + // Tell it which SPI slave device to access + spi_regs->ss = slave & 0xff; + + // Data we will send + spi_regs->txrx0 = data; + + // Run it -- write once and rewrite with GO set + spi_regs->ctrl = ctrl; + spi_regs->ctrl = ctrl | SPI_CTRL_GO_BSY; + + if(readback) { + spi_wait(); + return spi_regs->txrx0; + } + else + return 0; +} diff --git a/firmware/microblaze/lib/spi.h b/firmware/microblaze/lib/spi.h new file mode 100644 index 000000000..f5b69b270 --- /dev/null +++ b/firmware/microblaze/lib/spi.h @@ -0,0 +1,52 @@ +/* -*- c -*- */ +/* + * Copyright 2006,2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_SPI_H +#define INCLUDED_SPI_H + +#include <memory_map.h> +#include <stdbool.h> + +/*! + * \brief One time call to initialize SPI + */ +void spi_init(void); + +/*! + * \brief Wait for last SPI transaction to complete. + * Unless you need to know it completed, it's not necessary to call this. + */ +void spi_wait(void); + +#define SPI_TXONLY false // readback: no +#define SPI_TXRX true // readback: yes + +/* + * Flags for spi_transact + */ +#define SPIF_PUSH_RISE 0 // push tx data on rising edge of SCLK +#define SPIF_PUSH_FALL SPI_CTRL_TXNEG // push tx data on falling edge of SCLK +#define SPIF_LATCH_RISE 0 // latch rx data on rising edge of SCLK +#define SPIF_LATCH_FALL SPI_CTRL_RXNEG // latch rx data on falling edge of SCLK + + +uint32_t +spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags); + + +#endif /* INCLUDED_SPI_H */ diff --git a/firmware/microblaze/lib/stdint.h b/firmware/microblaze/lib/stdint.h new file mode 100644 index 000000000..b5a8611a9 --- /dev/null +++ b/firmware/microblaze/lib/stdint.h @@ -0,0 +1,34 @@ +/* -*- c -*- */ +/* + * Copyright 2007,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_STDINT_H +#define INCLUDED_STDINT_H + +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef short int16_t; +typedef unsigned short uint16_t; +typedef int int32_t; +typedef unsigned int uint32_t; +typedef long long int int64_t; +typedef unsigned long long int uint64_t; + +typedef int intptr_t; +typedef unsigned int uintptr_t; + +#endif /* INCLUDED_STDINT_H */ diff --git a/firmware/microblaze/lib/stdio.h b/firmware/microblaze/lib/stdio.h new file mode 100644 index 000000000..12a7ed0bb --- /dev/null +++ b/firmware/microblaze/lib/stdio.h @@ -0,0 +1,38 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef INCLUDED_STDIO_H +#define INCLUDED_STDIO_H + +// very trimmed down stdio.h See also nonstdio.h + +#ifndef NULL +#define NULL 0 +#endif + +#ifndef EOF +#define EOF (-1) +#endif + +int putchar(int c); +int puts(const char *s); +int printf(const char *format, ...); + +int getchar(void); + +#endif /* INCLUDED_STDIO_H */ diff --git a/firmware/microblaze/lib/u2_init.c b/firmware/microblaze/lib/u2_init.c new file mode 100644 index 000000000..2e2e6a0fb --- /dev/null +++ b/firmware/microblaze/lib/u2_init.c @@ -0,0 +1,129 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "pic.h" +#include "hal_io.h" +#include "lsadc.h" +#include "lsdac.h" +#include "buffer_pool.h" +#include "hal_uart.h" +#include "i2c.h" +#include "mdelay.h" +#include "ad9777.h" +#include "clocks.h" +#include "db.h" +#include "usrp2_i2c_addr.h" + +//#include "nonstdio.h" + +unsigned char u2_hw_rev_major; +unsigned char u2_hw_rev_minor; + +static inline void +get_hw_rev(void) +{ + bool ok = eeprom_read(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &u2_hw_rev_minor, 1); + ok &= eeprom_read(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &u2_hw_rev_major, 1); +} + +/* + * We ought to arrange for this to be called before main, but for now, + * we require that the user's main call u2_init as the first thing... + */ +bool +u2_init(void) +{ + // Set GPIOs to inputs, disable GPIO streaming + hal_gpio_set_ddr(GPIO_TX_BANK, 0x0000, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0x0000, 0xffff); + + hal_gpio_write(GPIO_TX_BANK, 0x0000, 0xffff); // init s/w output value to zero + hal_gpio_write(GPIO_RX_BANK, 0x0000, 0xffff); + + dsp_rx_regs->gpio_stream_enable = 0; // I, Q LSBs come from DSP + + hal_io_init(); + + // init spi, so that we can switch over to the high-speed clock + spi_init(); + + // init i2c so we can read our rev + i2c_init(); + get_hw_rev(); + + // set up the default clocks + clocks_init(); + + // clocks_enable_test_clk(true,1); + + // Enable ADCs + output_regs->adc_ctrl = ADC_CTRL_ON; + + // Set up AD9777 DAC + ad9777_write_reg(0, R0_1R); + ad9777_write_reg(1, R1_INTERP_4X | R1_REAL_MIX); + ad9777_write_reg(2, 0); + ad9777_write_reg(3, R3_PLL_DIV_1); + ad9777_write_reg(4, R4_PLL_ON | R4_CP_AUTO); + ad9777_write_reg(5, R5_I_FINE_GAIN(0)); + ad9777_write_reg(6, R6_I_COARSE_GAIN(0xf)); + ad9777_write_reg(7, 0); // I dac offset + ad9777_write_reg(8, 0); + ad9777_write_reg(9, R9_Q_FINE_GAIN(0)); + ad9777_write_reg(10, R10_Q_COARSE_GAIN(0xf)); + ad9777_write_reg(11, 0); // Q dac offset + ad9777_write_reg(12, 0); + + // Initial values for tx and rx mux registers + dsp_tx_regs->tx_mux = 0x10; + dsp_rx_regs->rx_mux = 0x44444444; + + // Set up serdes + output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN); + + pic_init(); // progammable interrupt controller + bp_init(); // buffer pool + lsadc_init(); // low-speed ADCs + lsdac_init(); // low-speed DACs + db_init(); // daughterboard init + + hal_enable_ints(); + + // flash all leds to let us know board is alive + hal_set_leds(0x0, 0x1f); + mdelay(100); + hal_set_leds(0x1f, 0x1f); + mdelay(100); + hal_set_leds(0x1, 0x1f); // Leave the first one on + +#if 0 + // test register readback + int rr, vv; + vv = ad9777_read_reg(0); + printf("ad9777 reg[0] = 0x%x\n", vv); + + for (rr = 0x04; rr <= 0x0d; rr++){ + vv = ad9510_read_reg(rr); + printf("ad9510 reg[0x%x] = 0x%x\n", rr, vv); + } +#endif + + return true; +} diff --git a/firmware/microblaze/lib/u2_init.h b/firmware/microblaze/lib/u2_init.h new file mode 100644 index 000000000..334791189 --- /dev/null +++ b/firmware/microblaze/lib/u2_init.h @@ -0,0 +1,31 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_U2_INIT_H +#define INCLUDED_U2_INIT_H + +#include <stdbool.h> + +extern unsigned char u2_hw_rev_major; +extern unsigned char u2_hw_rev_minor; + +/*! + * one-time init + */ +bool u2_init(void); + +#endif /* INCLUDED_U2_INIT_H */ diff --git a/firmware/microblaze/lib/usrp2_bytesex.h b/firmware/microblaze/lib/usrp2_bytesex.h new file mode 100644 index 000000000..2b74f2a0b --- /dev/null +++ b/firmware/microblaze/lib/usrp2_bytesex.h @@ -0,0 +1,66 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef INCLUDED_USRP2_BYTESEX_H +#define INCLUDED_USRP2_BYTESEX_H + +// The USRP2 speaks big-endian... +// Use the standard include files or provide substitutions for +// htons and friends + +#if defined(HAVE_ARPA_INET_H) +#include <arpa/inet.h> +#elif defined(HAVE_NETINET_IN_H) +#include <netinet/in.h> +#else +#include <stdint.h> + +#ifdef WORDS_BIGENDIAN // nothing to do... + +static inline uint32_t htonl(uint32_t x){ return x; } +static inline uint16_t htons(uint16_t x){ return x; } +static inline uint32_t ntohl(uint32_t x){ return x; } +static inline uint16_t ntohs(uint16_t x){ return x; } + +#else + +#ifdef HAVE_BYTESWAP_H +#include <byteswap.h> +#else + +static inline uint16_t +bswap_16 (uint16_t x) +{ + return ((((x) >> 8) & 0xff) | (((x) & 0xff) << 8)); +} + +static inline uint32_t +bswap_32 (uint32_t x) +{ + return ((((x) & 0xff000000) >> 24) | (((x) & 0x00ff0000) >> 8) \ + | (((x) & 0x0000ff00) << 8) | (((x) & 0x000000ff) << 24)); +} +#endif + +static inline uint32_t htonl(uint32_t x){ return bswap_32(x); } +static inline uint16_t htons(uint16_t x){ return bswap_16(x); } +static inline uint32_t ntohl(uint32_t x){ return bswap_32(x); } +static inline uint16_t ntohs(uint16_t x){ return bswap_16(x); } + +#endif +#endif +#endif /* INCLUDED_USRP2_BYTESEX_H */ diff --git a/firmware/microblaze/lib/wb16550.h b/firmware/microblaze/lib/wb16550.h new file mode 100644 index 000000000..7522f4438 --- /dev/null +++ b/firmware/microblaze/lib/wb16550.h @@ -0,0 +1,98 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +// Wishbone National Semiconductor 16550A compatible UART + +#ifndef INCLUDED_WB16550_H +#define INCLUDED_WB16550_H + +#include <stdint.h> + +typedef struct { + volatile uint8_t data; // 0 r/w: r: rx fifo, w: tx fifo (if DLAB: LSB of divisor) + volatile uint8_t ier; // 1 r/w: Interrupt Enable Register (if DLAB: MSB of divisor) + volatile uint8_t iir_fcr; // 2 r/w: r: Interrupt ID Register, + // w: Fifo Control Register + volatile uint8_t lcr; // 3 r/w: Line Control Register + volatile uint8_t mcr; // 4 w: Modem Control Register + volatile uint8_t lsr; // 5 r: Line Status Register + volatile uint8_t msr; // 6 r: Modem Status Register + +} wb16550_reg_t; + +#define UART_IER_RDI 0x01 // Enable received data interrupt +#define UART_IER_THRI 0x02 // Enable transmitter holding reg empty int. +#define UART_IER_RLSI 0x04 // Enable receiver line status interrupt +#define UART_IER_MSI 0x08 // Enable modem status interrupt + +#define UART_IIR_NO_INT 0x01 // No interrupts pending +#define UART_IIR_ID_MASK 0x06 // Mask for interrupt ID +#define UART_IIR_MSI 0x00 // Modem status interrupt +#define UART_IIR_THRI 0x02 // Tx holding register empty int +#define UART_IIR_RDI 0x04 // Rx data available int +#define UART_IIR_RLSI 0x06 // Receiver line status int + +#define UART_FCR_ENABLE_FIFO 0x01 // ignore, always enabled +#define UART_FCR_CLEAR_RCVR 0x02 // Clear the RCVR FIFO +#define UART_FCR_CLEAR_XMIT 0x04 // Clear the XMIT FIFO +#define UART_FCR_TRIGGER_MASK 0xC0 // Mask for FIFO trigger range +#define UART_FCR_TRIGGER_1 0x00 // Rx fifo trigger level: 1 byte +#define UART_FCR_TRIGGER_4 0x40 // Rx fifo trigger level: 4 bytes +#define UART_FCR_TRIGGER_8 0x80 // Rx fifo trigger level: 8 bytes +#define UART_FCR_TRIGGER_14 0xC0 // Rx fifo trigger level: 14 bytes + +#define UART_LCR_DLAB 0x80 // Divisor latch access bit +#define UART_LCR_SBC 0x40 // Set break control +#define UART_LCR_SPAR 0x20 // Stick parity +#define UART_LCR_EPAR 0x10 // Even parity select +#define UART_LCR_PARITY 0x08 // Parity Enable +#define UART_LCR_STOP 0x04 // Stop bits: 0=1 bit, 1=2 bits +#define UART_LCR_WLEN5 0x00 // Wordlength: 5 bits +#define UART_LCR_WLEN6 0x01 // Wordlength: 6 bits +#define UART_LCR_WLEN7 0x02 // Wordlength: 7 bits +#define UART_LCR_WLEN8 0x03 // Wordlength: 8 bits + +#define UART_MCR_LOOP 0x10 // Enable loopback test mode +#define UART_MCR_OUT2n 0x08 // Out2 complement (loopback mode) +#define UART_MCR_OUT1n 0x04 // Out1 complement (loopback mode) +#define UART_MCR_RTSn 0x02 // RTS complement +#define UART_MCR_DTRn 0x01 // DTR complement + +#define UART_LSR_TEMT 0x40 // Transmitter empty +#define UART_LSR_THRE 0x20 // Transmit-hold-register empty +#define UART_LSR_BI 0x10 // Break interrupt indicator +#define UART_LSR_FE 0x08 // Frame error indicator +#define UART_LSR_PE 0x04 // Parity error indicator +#define UART_LSR_OE 0x02 // Overrun error indicator +#define UART_LSR_DR 0x01 // Receiver data ready +#define UART_LSR_BRK_ERROR_BITS 0x1E // BI, FE, PE, OE bits +#define UART_LSR_ERROR 0x80 // At least 1 PE, FE or BI are in the fifo + +#define UART_MSR_DCD 0x80 // Data Carrier Detect +#define UART_MSR_RI 0x40 // Ring Indicator +#define UART_MSR_DSR 0x20 // Data Set Ready +#define UART_MSR_CTS 0x10 // Clear to Send +#define UART_MSR_DDCD 0x08 // Delta DCD +#define UART_MSR_TERI 0x04 // Trailing edge ring indicator +#define UART_MSR_DDSR 0x02 // Delta DSR +#define UART_MSR_DCTS 0x01 // Delta CTS +#define UART_MSR_ANY_DELTA 0x0F // Any of the delta bits! + + +#endif // INCLUDED_WB16550_H diff --git a/firmware/microblaze/u2_flash_tool b/firmware/microblaze/u2_flash_tool new file mode 100755 index 000000000..2b66a4ac0 --- /dev/null +++ b/firmware/microblaze/u2_flash_tool @@ -0,0 +1,116 @@ +#!/usr/bin/env python + +import sys +from optparse import OptionParser + +SECTOR_SIZE = 512 # bytes +MAX_FILE_SIZE = 1 * (2**20) # maximum number of bytes we'll burn to a slot + +FPGA_OFFSET = 0 # offset in flash to fpga image +FIRMWARE_OFFSET = 1 * (2**20) # offset in flash to firmware image + +def read_file_data(filename): + f = open(filename, "rb") + file_data = f.read(MAX_FILE_SIZE) + t = len(file_data) % SECTOR_SIZE + if t != 0: + file_data += (SECTOR_SIZE - t)*chr(0) # pad to an even sector size w/ zeros + return file_data + + +def write_flash(offset, filename, devname): + file_data = read_file_data(filename) + dev = open(devname, "wb") + dev.seek(offset, 0) # seek to absolute byte offset + dev.write(file_data) + dev.flush() + dev.close() + return True + + +def verify_flash(offset, filename, devname): + file_data = read_file_data(filename) + dev = open(devname, "rb") + dev.seek(offset, 0) # seek to absolute byte offset + dev_data = dev.read(len(file_data)) + if len(dev_data) != len(file_data): + sys.stderr.write("short read on device %s\n" % (devname,)) + return False + + if file_data == dev_data: + return True + + # doesn't match + nwrong = 0 + for i in range(len(file_data)): + if dev_data[i] != file_data[i]: + sys.stderr.write("mismatch at offset %7d. Expected 0x%02x, got 0x%02x\n" % ( + i, ord(file_data[i]), ord(dev_data[i]))) + nwrong += 1 + if nwrong > 16: + sys.stderr.write("> 16 errors, stopping comparison\n") + break + return False + +def read_flash(offset, filename, devname): + dev = open(devname, "rb") + dev.seek(offset, 0) # seek to absolute byte offset + dev_data = dev.read(MAX_FILE_SIZE) + dev.close() + open(filename, "wb").write(dev_data) + + +def main(): + parser = OptionParser(usage="%prog: [options] filename") + parser.add_option("-w", "--write", action="store_const", const="write", dest="mode", + help="write FILE to TARGET slot") + parser.add_option("-v", "--verify", action="store_const", const="verify", dest="mode", + help="verify FILE against TARGET slot") + parser.add_option("-r", "--read", action="store_const", const="read", dest="mode", + help="read TARGET slot, write to FILE") + parser.add_option("-t", "--target", type="choice", choices=("fpga", "s/w"), default="s/w", + help="select TARGET slot from: fpga, s/w [default=%default]") + parser.add_option("", "--dev", default=None, + help="specify flash device file, e.g., /dev/sdb. Be careful!") + parser.set_defaults(target="s/w", mode=None) + + (options, args) = parser.parse_args() + if len(args) != 1: + parser.print_help() + raise SystemExit + + filename = args[0] + + if options.mode is None: + sys.stderr.write("specify mode with -w, -v or -r\n") + parser.print_help() + raise SystemExit + + if options.dev is None: + sys.stderr.write("specify the device file with --dev\n") + parser.print_help() + raise SystemExit + + offset = { "fpga" : FPGA_OFFSET, "s/w" : FIRMWARE_OFFSET }[options.target] + + if options.mode == "write": + r = (write_flash(offset, filename, options.dev) + and verify_flash(offset, filename, options.dev)) + elif options.mode == "verify": + r = verify_flash(offset, filename, options.dev) + elif options.mode == "read": + r = read_flash(offset, filename, options.dev) + else: + raise NotImplemented + + if not r: + raise SystemExit, 1 + + +if __name__ == "__main__": + main() + + + + + |