diff options
| -rw-r--r-- | usrp2/sdr_lib/dsp_core_rx.v | 35 | ||||
| -rw-r--r-- | usrp2/top/u2_rev3/u2_core_udp.v | 2 | ||||
| -rw-r--r-- | usrp2/top/u2_rev3/u2_rev3.v | 8 |
3 files changed, 18 insertions, 27 deletions
diff --git a/usrp2/sdr_lib/dsp_core_rx.v b/usrp2/sdr_lib/dsp_core_rx.v index 1e689fc7f..1318809d6 100644 --- a/usrp2/sdr_lib/dsp_core_rx.v +++ b/usrp2/sdr_lib/dsp_core_rx.v @@ -57,41 +57,32 @@ module dsp_core_rx (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_in(adc_b),.adc_out(adc_b_ofs)); - wire [3:0] muxctrl; - setting_reg #(.my_addr(BASE+5)) sr_8 + wire [7:0] muxctrl; + setting_reg #(.my_addr(BASE+5), .width(8)) sr_8 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out({UNUSED_2,muxctrl}),.changed()); wire [1:0] gpio_ena; - setting_reg #(.my_addr(BASE+6)) sr_9 + setting_reg #(.my_addr(BASE+6), .width(2)) sr_9 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out({UNUSED_3,gpio_ena}),.changed()); - // The TVRX connects to what is called adc_b, thus A and B are - // swapped throughout the design. - // - // In the interest of expediency and keeping the s/w sane, we just remap them here. - // The I & Q fields are mapped the same: - // 0 -> "the real A" (as determined by the TVRX) - // 1 -> "the real B" - // 2 -> const zero - always @(posedge clk) - case(muxctrl[1:0]) // The I mapping - 0: adc_i <= adc_b_ofs; // "the real A" - 1: adc_i <= adc_a_ofs; + case(muxctrl[3:0]) // The I mapping + 0: adc_i <= adc_a_ofs; + 1: adc_i <= adc_b_ofs; 2: adc_i <= 0; default: adc_i <= 0; - endcase // case(muxctrl[1:0]) - + endcase // case (muxctrl[3:0]) + always @(posedge clk) - case(muxctrl[3:2]) // The Q mapping - 0: adc_q <= adc_b_ofs; // "the real A" - 1: adc_q <= adc_a_ofs; + case(muxctrl[7:4]) // The Q mapping + 0: adc_q <= adc_a_ofs; + 1: adc_q <= adc_b_ofs; 2: adc_q <= 0; default: adc_q <= 0; - endcase // case(muxctrl[3:2]) - + endcase // case (muxctrl[7:4]) + always @(posedge clk) if(rst) phase <= 0; diff --git a/usrp2/top/u2_rev3/u2_core_udp.v b/usrp2/top/u2_rev3/u2_core_udp.v index 124930c23..c9502898b 100644 --- a/usrp2/top/u2_rev3/u2_core_udp.v +++ b/usrp2/top/u2_rev3/u2_core_udp.v @@ -425,7 +425,7 @@ module u2_core cycle_count <= cycle_count + 1; //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = 32'd1; + localparam compat_num = 32'd2; wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), diff --git a/usrp2/top/u2_rev3/u2_rev3.v b/usrp2/top/u2_rev3/u2_rev3.v index 3a43e4ffe..d5b382c19 100644 --- a/usrp2/top/u2_rev3/u2_rev3.v +++ b/usrp2/top/u2_rev3/u2_rev3.v @@ -205,10 +205,10 @@ module u2_rev3 always @(posedge dsp_clk) begin - adc_a_reg1 <= adc_a; - adc_b_reg1 <= adc_b; - adc_ovf_a_reg1 <= adc_ovf_a; - adc_ovf_b_reg1 <= adc_ovf_b; + adc_a_reg1 <= adc_b; // I and Q on RX are swapped in layout + adc_b_reg1 <= adc_a; + adc_ovf_a_reg1 <= adc_ovf_b; + adc_ovf_b_reg1 <= adc_ovf_a; end always @(posedge dsp_clk) |