diff options
31 files changed, 913 insertions, 543 deletions
diff --git a/fpga/usrp2/control_lib/Makefile.srcs b/fpga/usrp2/control_lib/Makefile.srcs index 751b40828..5ae185ee8 100644 --- a/fpga/usrp2/control_lib/Makefile.srcs +++ b/fpga/usrp2/control_lib/Makefile.srcs @@ -50,4 +50,9 @@ bootram.v \ nsgpio16LE.v \ settings_bus_16LE.v \ atr_controller16.v \ +newfifo/fifo_pacer.v \ +newfifo/packet_generator32.v \ +newfifo/packet_generator.v \ +newfifo/packet_verifier32.v \ +newfifo/packet_verifier.v \ )) diff --git a/fpga/usrp2/top/u1e/u1e_core.v b/fpga/usrp2/top/u1e/u1e_core.v index d590b4fb1..7d5924bea 100644 --- a/fpga/usrp2/top/u1e/u1e_core.v +++ b/fpga/usrp2/top/u1e/u1e_core.v @@ -29,18 +29,22 @@ module u1e_core localparam TXFIFOSIZE = 13; localparam RXFIFOSIZE = 13; - localparam SR_RX_DSP = 0; // 5 regs - localparam SR_CLEAR_FIFO = 6; // 1 reg - localparam SR_RX_CTRL = 8; // 9 regs - localparam SR_TX_DSP = 17; // 5 regs - localparam SR_TX_CTRL = 24; // 2 regs - localparam SR_TIME64 = 28; // 4 regs + // 64 total regs in address space + localparam SR_RX_CTRL = 0; // 9 regs (+0 to +8) + localparam SR_RX_DSP = 16; // 7 regs (+0 to +6) + localparam SR_TX_CTRL = 24; // 6 regs (+0 to +5) + localparam SR_TX_DSP = 32; // 5 regs (+0 to +4) + localparam SR_TIME64 = 40; // 6 regs (+0 to +5) + localparam SR_CLEAR_RX_FIFO = 48; // 1 reg + localparam SR_CLEAR_TX_FIFO = 49; // 1 reg + localparam SR_GLOBAL_RESET = 50; // 1 reg + localparam SR_REG_TEST32 = 52; // 1 reg wire [7:0] COMPAT_NUM = 8'd3; wire wb_clk = clk_fpga; - wire wb_rst = rst_fpga; - + wire wb_rst, global_reset; + wire pps_int; wire [63:0] vita_time, vita_time_pps; reg [15:0] reg_leds, reg_cgen_ctrl, reg_test, xfer_rate; @@ -51,6 +55,12 @@ module u1e_core wire [31:0] debug_vt; + setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(),.changed(global_reset)); + + reset_sync reset_sync(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(wb_rst)); + // ///////////////////////////////////////////////////////////////////////////////////// // GPMC Slave to Wishbone Master localparam dw = 16; @@ -72,15 +82,16 @@ module u1e_core wire [7:0] rate; wire bus_error; - - wire clear_rx_int, clear_tx_int, clear_tx, clear_rx, do_clear; + wire clear_tx, clear_rx; - setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(2)) sr_clear + setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({clear_tx_int,clear_rx_int}),.changed(do_clear)); - assign clear_tx = clear_tx_int & do_clear; - assign clear_rx = clear_rx_int & do_clear; - + .in(set_data),.out(),.changed(clear_rx)); + + setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(),.changed(clear_tx)); + gpmc_async #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) gpmc (.arst(wb_rst), .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), @@ -149,7 +160,8 @@ module u1e_core .src1_rdy_i(rx_src_rdy_int), .dst1_rdy_o(rx_dst_rdy_int), .src2_rdy_o(rx_src_rdy), .dst2_rdy_i(rx_dst_rdy), .underrun(), .overrun(rx_overrun)); - + + wire run_tx, run_rx, strobe_tx, strobe_rx; `endif // `ifdef TIMED `ifdef DSP @@ -203,7 +215,9 @@ module u1e_core wire run_tx; vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), - .REPORT_ERROR(1), .PROT_ENG_FLAGS(0)) + .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), + .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), + .DSP_NUMBER(0)) vita_tx_chain (.clk(wb_clk), .reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), @@ -258,7 +272,7 @@ module u1e_core .s2_addr(4'h2), .s2_mask(4'hF), .s3_addr(4'h3), .s3_mask(4'hF), .s4_addr(4'h4), .s4_mask(4'hF), .s5_addr(4'h5), .s5_mask(4'hF), .s6_addr(4'h6), .s6_mask(4'hF), .s7_addr(4'h7), .s7_mask(4'hF), - .s8_addr(4'h8), .s8_mask(4'hF), .s9_addr(4'h9), .s9_mask(4'hF), + .s8_addr(4'h8), .s8_mask(4'hE), .s9_addr(4'hf), .s9_mask(4'hF), // slave 8 is double wide .sa_addr(4'ha), .sa_mask(4'hF), .sb_addr(4'hb), .sb_mask(4'hF), .sc_addr(4'hc), .sc_mask(4'hF), .sd_addr(4'hd), .sd_mask(4'hF), .se_addr(4'he), .se_mask(4'hF), .sf_addr(4'hf), .sf_mask(4'hF)) @@ -299,7 +313,7 @@ module u1e_core .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) ); - assign s8_ack = 0; assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; + assign s5_ack = 0; assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0; // ///////////////////////////////////////////////////////////////////////////////////// @@ -409,12 +423,12 @@ module u1e_core .gpio( {io_tx,io_rx} ) ); // ///////////////////////////////////////////////////////////////////////// - // Settings Bus -- Slave #5 + // Settings Bus -- Slave #8 + 9 - // only have 32 regs, 32 bits each with current setup... - settings_bus_16LE #(.AWIDTH(11),.RWIDTH(11-4-2)) settings_bus_16LE - (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s5_adr),.wb_dat_i(s5_dat_mosi), - .wb_stb_i(s5_stb),.wb_we_i(s5_we),.wb_ack_o(s5_ack), + // only have 64 regs, 32 bits each with current setup... + settings_bus_16LE #(.AWIDTH(11),.RWIDTH(6)) settings_bus_16LE + (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi), + .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), .strobe(set_stb),.addr(set_addr),.data(set_data) ); // ///////////////////////////////////////////////////////////////////////// @@ -429,15 +443,24 @@ module u1e_core // ///////////////////////////////////////////////////////////////////////// // Readback mux 32 -- Slave #7 + wire [31:0] reg_test32; + + setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32 + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(reg_test32),.changed()); + wb_readback_mux_16LE readback_mux_32 (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s7_stb), .wb_adr_i(s7_adr), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack), - .word00(vita_time[63:32]), .word01(vita_time[31:0]), - .word02(vita_time_pps[63:32]),.word03(vita_time_pps[31:0]), - .word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0), - .word08(32'b0),.word09(32'b0),.word10(32'b0),.word11(32'b0), - .word12(32'b0),.word13(32'b0),.word14(32'b0),.word15(32'b0) + .word00(vita_time[63:32]), .word01(vita_time[31:0]), + .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]), + .word04(reg_test32), .word05(32'b0), + .word06(32'b0), .word07(32'b0), + .word08(32'b0), .word09(32'b0), + .word10(32'b0), .word11(32'b0), + .word12(32'b0), .word13(32'b0), + .word14(32'b0), .word15(32'b0) ); // ///////////////////////////////////////////////////////////////////////// diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt index e64c1031f..6b2ac4e64 100644 --- a/host/CMakeLists.txt +++ b/host/CMakeLists.txt @@ -183,6 +183,8 @@ IF(ENABLE_UTILS) ADD_SUBDIRECTORY(utils) ENDIF(ENABLE_UTILS) +ADD_SUBDIRECTORY(usrp_e_utils) + ######################################################################## # Print Summary ######################################################################## diff --git a/host/apps/omap_debug/usrp-e-crc-rw.c b/host/apps/omap_debug/usrp-e-crc-rw.c index c3ae45cc1..c6f3427f0 100644 --- a/host/apps/omap_debug/usrp-e-crc-rw.c +++ b/host/apps/omap_debug/usrp-e-crc-rw.c @@ -8,11 +8,19 @@ #include <stdlib.h> #include <unistd.h> #include <stddef.h> +#include <poll.h> +#include <sys/mman.h> #include "usrp_e.h" // max length #define PKT_DATA_LENGTH 1016 static int packet_data_length; +struct ring_buffer_info (*rxi)[]; +struct ring_buffer_info (*txi)[]; +__u8 *rx_buf; +__u8 *tx_buf; +static struct usrp_e_ring_buffer_size_t rb_size; + static int fp; static u_int32_t crc_tab[256]; @@ -44,8 +52,7 @@ static u_int32_t chksum_crc32_gentab(void) static void *read_thread(void *threadid) { int cnt; - struct usrp_transfer_frame *rx_data; - int rx_pkt_cnt; + int rx_pkt_cnt, rb_read; int i; unsigned long crc; unsigned int rx_crc; @@ -53,70 +60,56 @@ static void *read_thread(void *threadid) struct timeval start_time, finish_time; __u8 *p; - __u32 *pi; printf("Greetings from the reading thread!\n"); // IMPORTANT: must assume max length packet from fpga - rx_data = malloc(2048); - + rx_pkt_cnt = 0; + rb_read = 0; bytes_transfered = 0; gettimeofday(&start_time, NULL); while (1) { - cnt = read(fp, rx_data, 2048); - if (cnt < 0) - printf("Error returned from read: %d\n", cnt); - - rx_pkt_cnt++; - -#if 0 - if (rx_pkt_cnt == 512) { - printf("."); - fflush(stdout); - rx_pkt_cnt = 0; + while (!((*rxi)[rb_read].flags & RB_USER)) { + struct pollfd pfd; + pfd.fd = fp; + pfd.events = POLLIN; + ssize_t ret = poll(&pfd, 1, -1); } -#endif + (*rxi)[rb_read].flags = RB_USER_PROCESS; - if (rx_data->status & RB_OVERRUN) - printf("O"); - - printf("rx_data->len = %d\n", rx_data->len); + rx_pkt_cnt++; + cnt = (*rxi)[rb_read].len; + p = rx_buf + (rb_read * 2048); - + rx_crc = *(int *) &p[cnt-4]; crc = 0xFFFFFFFF; - for (i = 0; i < rx_data->len - 4; i+=2) { + for (i = 0; i < cnt - 4; i+=2) { crc = ((crc >> 8) & 0x00FFFFFF) ^ - crc_tab[(crc ^ rx_data->buf[i+1]) & 0xFF]; -printf("idx = %d, data = %X, crc = %X\n", i, rx_data->buf[i+1],crc); + crc_tab[(crc ^ p[i+1]) & 0xFF]; +//printf("idx = %d, data = %X, crc = %X\n", i, p[i+1],crc); crc = ((crc >> 8) & 0x00FFFFFF) ^ - crc_tab[(crc ^ rx_data->buf[i]) & 0xFF]; -printf("idx = %d, data = %X, crc = %X\n", i, rx_data->buf[i],crc); + crc_tab[(crc ^ p[i]) & 0xFF]; +//printf("idx = %d, data = %X, crc = %X\n", i, p[i],crc); } - p = &rx_data->buf[rx_data->len - 4]; - pi = (__u32 *) p; - rx_crc = *pi; - -#if 1 - printf("rx_data->len = %d\n", rx_data->len); - printf("rx_data->status = %d\n", rx_data->status); - for (i = 0; i < rx_data->len; i++) - printf("idx = %d, data = %X\n", i, rx_data->buf[i]); - printf("calc crc = %lX, rx crc = %X\n", crc, rx_crc); - fflush(stdout); - break; -#endif + (*rxi)[rb_read].flags = RB_KERNEL; +#if 0 if (rx_crc != (crc & 0xFFFFFFFF)) { printf("CRC Error, calc crc: %X, rx_crc: %X\n", (crc & 0xFFFFFFFF), rx_crc); } +#endif + + rb_read++; + if (rb_read == rb_size.num_rx_frames) + rb_read = 0; - bytes_transfered += rx_data->len; + bytes_transfered += cnt; if (bytes_transfered > (100 * 1000000)) { gettimeofday(&finish_time, NULL); @@ -124,7 +117,7 @@ printf("idx = %d, data = %X, crc = %X\n", i, rx_data->buf[i],crc); printf("Bytes transfered = %ld, elapsed seconds = %ld\n", bytes_transfered, elapsed_seconds); printf("RX data transfer rate = %f K Samples/second\n", - (float) bytes_transfered / (float) elapsed_seconds / 250); + (float) bytes_transfered / (float) elapsed_seconds / 4000); start_time = finish_time; @@ -135,17 +128,17 @@ printf("idx = %d, data = %X, crc = %X\n", i, rx_data->buf[i],crc); static void *write_thread(void *threadid) { - int seq_number, i, cnt, tx_pkt_cnt; + int i, tx_pkt_cnt, rb_write; int tx_len; unsigned long crc; - struct usrp_transfer_frame *tx_data; unsigned long bytes_transfered, elapsed_seconds; struct timeval start_time, finish_time; + __u8 *p; printf("Greetings from the write thread!\n"); + rb_write = 0; tx_pkt_cnt = 0; - tx_data = malloc(2048); bytes_transfered = 0; gettimeofday(&start_time, NULL); @@ -153,6 +146,14 @@ static void *write_thread(void *threadid) while (1) { tx_pkt_cnt++; + p = tx_buf + (rb_write * 2048); + +// printf("p = %p\n", p); + + if (packet_data_length > 0) + tx_len = packet_data_length; + else + tx_len = (random() & 0x1ff) + (2044 - 512); #if 0 if (tx_pkt_cnt == 512) { @@ -170,25 +171,33 @@ static void *write_thread(void *threadid) } #endif - tx_len = 2048 - sizeof(struct usrp_transfer_frame) - sizeof(int); - tx_data->len = tx_len + sizeof(int); +// printf("Checking for space at rb entry = %d\n", rb_write); + while (!((*txi)[rb_write].flags & RB_KERNEL)) { + struct pollfd pfd; + pfd.fd = fp; + pfd.events = POLLOUT; + ssize_t ret = poll(&pfd, 1, -1); + } +// printf("Got space\n"); crc = 0xFFFFFFFF; - for (i = 0; i < tx_len; i++) { - tx_data->buf[i] = i & 0xFF; + for (i = 0; i < tx_len-4; i++) { + p[i] = i & 0xFF; crc = ((crc >> 8) & 0x00FFFFFF) ^ - crc_tab[(crc ^ tx_data->buf[i]) & 0xFF]; + crc_tab[(crc ^ p[i]) & 0xFF]; } - *((int *) &tx_data[tx_len]) = crc; + *(int *) &p[tx_len-4] = crc; - cnt = write(fp, tx_data, 2048); - if (cnt < 0) - printf("Error returned from write: %d\n", cnt); + (*txi)[rb_write].len = tx_len; + (*txi)[rb_write].flags = RB_USER; + rb_write++; + if (rb_write == rb_size.num_tx_frames) + rb_write = 0; - bytes_transfered += tx_data->len; + bytes_transfered += tx_len; if (bytes_transfered > (100 * 1000000)) { gettimeofday(&finish_time, NULL); @@ -196,7 +205,7 @@ static void *write_thread(void *threadid) printf("Bytes transfered = %d, elapsed seconds = %d\n", bytes_transfered, elapsed_seconds); printf("TX data transfer rate = %f K Samples/second\n", - (float) bytes_transfered / (float) elapsed_seconds / 250); + (float) bytes_transfered / (float) elapsed_seconds / 4000); start_time = finish_time; @@ -213,13 +222,16 @@ int main(int argc, char *argv[]) pthread_t tx, rx; long int t; int fpga_config_flag ,decimation; + int ret, map_size, page_size; + void *rb; + struct usrp_e_ctl16 d; struct sched_param s = { .sched_priority = 1 }; if (argc < 4) { - printf("%s t|w|rw decimation data_size\n", argv[0]); + printf("%s r|w|rw decimation data_size\n", argv[0]); return -1; } @@ -231,6 +243,29 @@ int main(int argc, char *argv[]) fp = open("/dev/usrp_e0", O_RDWR); printf("fp = %d\n", fp); + page_size = getpagesize(); + + ret = ioctl(fp, USRP_E_GET_RB_INFO, &rb_size); + + map_size = (rb_size.num_pages_rx_flags + rb_size.num_pages_tx_flags) * page_size + + (rb_size.num_rx_frames + rb_size.num_tx_frames) * (page_size >> 1); + + rb = mmap(0, map_size, PROT_READ|PROT_WRITE, MAP_SHARED, fp, 0); + if (rb == MAP_FAILED) { + perror("mmap failed"); + return -1; + } + + printf("rb = %X\n", rb); + + rxi = rb; + rx_buf = rb + (rb_size.num_pages_rx_flags * page_size); + txi = rb + (rb_size.num_pages_rx_flags * page_size) + + (rb_size.num_rx_frames * page_size >> 1); + tx_buf = rb + (rb_size.num_pages_rx_flags * page_size) + + (rb_size.num_rx_frames * page_size >> 1) + + (rb_size.num_pages_tx_flags * page_size); + fpga_config_flag = 0; if (strcmp(argv[1], "w") == 0) fpga_config_flag |= (1 << 15); diff --git a/host/apps/omap_debug/usrp-e-mm-loopback.c b/host/apps/omap_debug/usrp-e-mm-loopback.c index f5fc83c87..b67eecd21 100644 --- a/host/apps/omap_debug/usrp-e-mm-loopback.c +++ b/host/apps/omap_debug/usrp-e-mm-loopback.c @@ -75,6 +75,8 @@ static void *read_thread(void *threadid) ssize_t ret = poll(&pfd, 1, -1); } + (*rxi)[rb_read].flags = RB_USER_PROCESS; + // printf("pkt received, rb_read = %d\n", rb_read); cnt = (*rxi)[rb_read].len; diff --git a/host/apps/omap_debug/usrp_e.h b/host/apps/omap_debug/usrp_e.h index f96706c4a..4c6a5dd89 100644 --- a/host/apps/omap_debug/usrp_e.h +++ b/host/apps/omap_debug/usrp_e.h @@ -34,16 +34,13 @@ struct usrp_e_ctl32 { #define UE_SPI_TXRX 1 /* Defines for spi ctrl register */ -#define UE_SPI_CTRL_TXNEG (BIT(10)) -#define UE_SPI_CTRL_RXNEG (BIT(9)) +#define UE_SPI_CTRL_TXNEG (1<<10) +#define UE_SPI_CTRL_RXNEG (1<<9) #define UE_SPI_PUSH_RISE 0 #define UE_SPI_PUSH_FALL UE_SPI_CTRL_TXNEG #define UE_SPI_LATCH_RISE 0 #define UE_SPI_LATCH_FALL UE_SPI_CTRL_RXNEG -#define USRP_E_GET_COMPAT_NUMBER _IO(USRP_E_IOC_MAGIC, 0x28) - -#define USRP_E_COMPAT_NUMBER 1 struct usrp_e_spi { __u8 readback; @@ -68,12 +65,16 @@ struct usrp_e_i2c { #define USRP_E_I2C_READ _IOWR(USRP_E_IOC_MAGIC, 0x25, struct usrp_e_i2c) #define USRP_E_I2C_WRITE _IOW(USRP_E_IOC_MAGIC, 0x26, struct usrp_e_i2c) #define USRP_E_GET_RB_INFO _IOR(USRP_E_IOC_MAGIC, 0x27, struct usrp_e_ring_buffer_size_t) +#define USRP_E_GET_COMPAT_NUMBER _IO(USRP_E_IOC_MAGIC, 0x28) + +#define USRP_E_COMPAT_NUMBER 1 /* Flag defines */ #define RB_USER (1<<0) #define RB_KERNEL (1<<1) #define RB_OVERRUN (1<<2) #define RB_DMA_ACTIVE (1<<3) +#define RB_USER_PROCESS (1<<4) struct ring_buffer_info { int flags; diff --git a/host/docs/CMakeLists.txt b/host/docs/CMakeLists.txt index 0c2cadfc2..c04262b63 100644 --- a/host/docs/CMakeLists.txt +++ b/host/docs/CMakeLists.txt @@ -29,6 +29,7 @@ SET(manual_sources transport.rst usrp1.rst usrp2.rst + usrp_e1xx.rst ) ######################################################################## diff --git a/host/docs/index.rst b/host/docs/index.rst index 6dac2680c..734300164 100644 --- a/host/docs/index.rst +++ b/host/docs/index.rst @@ -24,7 +24,9 @@ Application Notes * `Device Identification Notes <./identification.html>`_ * `Firmware and FPGA Image Notes <./images.html>`_ * `USRP1 Application Notes <./usrp1.html>`_ -* `USRP2 and N Series Application Notes <./usrp2.html>`_ +* `USRP2 Application Notes <./usrp2.html>`_ +* `USRP-N2XX Series Application Notes <./usrp2.html>`_ +* `USRP-E1XX Series Application Notes <./usrp_e1xx.html>`_ * `Daughterboard Application Notes <./dboards.html>`_ * `Transport Application Notes <./transport.html>`_ diff --git a/host/docs/usrp_e1xx.rst b/host/docs/usrp_e1xx.rst new file mode 100644 index 000000000..ffcd370dd --- /dev/null +++ b/host/docs/usrp_e1xx.rst @@ -0,0 +1,65 @@ +======================================================================== +UHD - USRP-E1XX Series Application Notes +======================================================================== + +.. contents:: Table of Contents + +------------------------------------------------------------------------ +Specify a non-standard image +------------------------------------------------------------------------ +The UHD will automatically select the USRP embedded FPGA image from the installed images package. +The FPGA image selection can be overridden with the "fpga" device address parameter. + +Example device address string representations to specify non-standard FPGA image: + +:: + + fpga=usrp_e100_custom.bin + +------------------------------------------------------------------------ +Changing the master clock rate +------------------------------------------------------------------------ +The master clock rate of the USRP embedded feeds both the FPGA DSP and the codec chip. +UHD can dynamically reconfigure the clock rate though the set_master_clock_rate() API call. +Hundreds of rates between 32MHz and 64MHz are available. +A few notable rates are: + +* 64MHz - maximum rate of the codec chip +* 61.44MHz - good for UMTS/WCDMA applications +* 52Mhz - good for GSM applications + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Set 61.44MHz - uses external VCXO +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +To use the 61.44MHz clock rate, the USRP embedded will require two jumpers to be moved. + +* J16 is a two pin header, remove the jumper (or leave it on pin1 only) +* J15 is a three pin header, move the jumper to (pin1, pin2) + +For the correct clock settings, call usrp->set_master_clock_rate(61.44e6) +before any other parameters are set in your application. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Set other rates - uses internal VCO +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +To use other clock rates, the jumpers will need to be in the default position. + +* J16 is a two pin header, move the jumper to (pin1, pin2) +* J15 is a three pin header, move the jumper to (pin2, pin3) + +For the correct clock settings, call usrp->set_master_clock_rate(rate) +before any other parameters are set in your application. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Clock rate recovery - unbricking +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +It is possible to set a clock rate such that the UHD can no longer communicate with the FPGA. +When this occurs, it is necessary to use the usrp-e-utility to recover the clock generator. +The recovery utility works by loading a special pass-through FPGA image so the computer +can talk directly to the clock generator over a SPI interface. + +Run the following commands to restore the clock generator to a usable state: +:: + + cd <prefix>/share/uhd/usrp_e_utilities + ./usrp-e-utility --fpga=../images/usrp_e100_pt_fpga.bin --reclk diff --git a/host/examples/rx_timed_samples.cpp b/host/examples/rx_timed_samples.cpp index 9ebe36c5a..630b4a7a9 100644 --- a/host/examples/rx_timed_samples.cpp +++ b/host/examples/rx_timed_samples.cpp @@ -32,7 +32,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ std::string args; double seconds_in_future; size_t total_num_samps; - double rate, freq; + double rate, freq, clock; //setup the program options po::options_description desc("Allowed options"); @@ -41,6 +41,7 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") ("secs", po::value<double>(&seconds_in_future)->default_value(3), "number of seconds in the future to receive") ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to receive") + ("clock", po::value<double>(&clock), "master clock frequency in Hz") ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") ("dilv", "specify to disable inner-loop verbose") @@ -63,6 +64,12 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + //optionally set the clock rate (do before setting anything else) + if (vm.count("clock")){ + std::cout << boost::format("Setting master clock rate: %f MHz...") % (clock/1e6) << std::endl; + usrp->set_master_clock_rate(clock); + } + //set the rx sample rate std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; usrp->set_rx_rate(rate); diff --git a/host/lib/ic_reg_maps/gen_ad9522_regs.py b/host/lib/ic_reg_maps/gen_ad9522_regs.py index a5debe568..86605c34a 100755 --- a/host/lib/ic_reg_maps/gen_ad9522_regs.py +++ b/host/lib/ic_reg_maps/gen_ad9522_regs.py @@ -80,6 +80,14 @@ external_zero_delay_fcds 0x01E[4:3] 0 enable_external_zero_delay 0x01E[2] 0 enable_zero_delay 0x01E[1] 0 ######################################################################## +vco_calibration_finished 0x01F[6] 0 +holdover_active 0x01F[5] 0 +ref2_selected 0x01F[4] 0 +vco_freq_gt_thresh 0x01F[3] 0 +ref2_freq_gt_thresh 0x01F[2] 0 +ref1_freq_gt_thresh 0x01F[1] 0 +digital_lock_detect 0x01F[0] 0 +######################################################################## #for $i in range(12) #set $addr = ($i + 0x0F0) out$(i)_format $(addr)[7] 0 lvds, cmos diff --git a/host/lib/usrp/usrp_e100/CMakeLists.txt b/host/lib/usrp/usrp_e100/CMakeLists.txt index c32dd87f8..acbac177e 100644 --- a/host/lib/usrp/usrp_e100/CMakeLists.txt +++ b/host/lib/usrp/usrp_e100/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2010 Ettus Research LLC +# Copyright 2010-2011 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -40,7 +40,7 @@ IF(ENABLE_USRP_E100) ${CMAKE_CURRENT_SOURCE_DIR}/dboard_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/dboard_iface.cpp ${CMAKE_CURRENT_SOURCE_DIR}/dsp_impl.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/fpga-downloader.cc + ${CMAKE_CURRENT_SOURCE_DIR}/fpga_downloader.cpp ${CMAKE_CURRENT_SOURCE_DIR}/io_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/mboard_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_impl.cpp diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.cpp b/host/lib/usrp/usrp_e100/clock_ctrl.cpp index 1fb1a7125..e29fe18ce 100644 --- a/host/lib/usrp/usrp_e100/clock_ctrl.cpp +++ b/host/lib/usrp/usrp_e100/clock_ctrl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -22,11 +22,26 @@ #include "usrp_e100_regs.hpp" //spi slave constants #include <boost/assign/list_of.hpp> #include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/thread/thread.hpp> +#include <boost/math/common_factor_rt.hpp> //gcd +#include <algorithm> #include <utility> #include <iostream> using namespace uhd; +/*********************************************************************** + * Constants + **********************************************************************/ +static const bool CLOCK_SETTINGS_DEBUG = false; +static const bool ENABLE_THE_TEST_OUT = true; +static const double REFERENCE_INPUT_RATE = 10e6; +static const double DEFAULT_OUTPUT_RATE = 64e6; + +/*********************************************************************** + * Helpers + **********************************************************************/ template <typename div_type, typename bypass_type> static void set_clock_divider( size_t divider, div_type &low, div_type &high, bypass_type &bypass ){ @@ -36,24 +51,117 @@ template <typename div_type, typename bypass_type> static void set_clock_divider } /*********************************************************************** - * Constants + * Clock rate calculation stuff: + * Using the internal VCO between 1400 and 1800 MHz **********************************************************************/ -static const bool enable_test_clock = false; -static const size_t ref_clock_doubler = 2; //enabled below -static const double ref_clock_rate = 10e6 * ref_clock_doubler; +struct clock_settings_type{ + size_t ref_clock_doubler, r_counter, a_counter, b_counter, prescaler, vco_divider, chan_divider; + size_t get_n_counter(void) const{return prescaler * b_counter + a_counter;} + double get_ref_rate(void) const{return REFERENCE_INPUT_RATE * ref_clock_doubler;} + double get_vco_rate(void) const{return get_ref_rate()/r_counter * get_n_counter();} + double get_chan_rate(void) const{return get_vco_rate()/vco_divider;} + double get_out_rate(void) const{return get_chan_rate()/chan_divider;} + std::string to_pp_string(void) const{ + return str(boost::format( + " r_counter: %d\n" + " a_counter: %d\n" + " b_counter: %d\n" + " prescaler: %d\n" + " vco_divider: %d\n" + " chan_divider: %d\n" + " vco_rate: %fMHz\n" + " chan_rate: %fMHz\n" + " out_rate: %fMHz\n" + ) + % r_counter + % a_counter + % b_counter + % prescaler + % vco_divider + % chan_divider + % (get_vco_rate()/1e6) + % (get_chan_rate()/1e6) + % (get_out_rate()/1e6) + ); + } +}; + +//! gives the greatest divisor of num between 1 and max inclusive +template<typename T> static inline T greatest_divisor(T num, T max){ + for (T i = max; i > 1; i--) if (num%i == 0) return i; return 1; +} + +//! gives the least divisor of num between min and num exclusive +template<typename T> static inline T least_divisor(T num, T min){ + for (T i = min; i < num; i++) if (num%i == 0) return i; return 1; +} + +static clock_settings_type get_clock_settings(double rate){ + clock_settings_type cs; + cs.ref_clock_doubler = 2; //always doubling + cs.prescaler = 8; //set to 8 when input is under 2400 MHz -static const size_t r_counter = 1; -static const size_t a_counter = 0; -static const size_t b_counter = 20 / ref_clock_doubler; -static const size_t prescaler = 8; //set below with enum, set to 8 when input is under 2400 MHz -static const size_t vco_divider = 5; //set below with enum + //basic formulas used below: + //out_rate*X = ref_rate*Y + //X = i*ref_rate/gcd + //Y = i*out_rate/gcd + //X = chan_div * vco_div * R + //Y = P*B + A -static const size_t n_counter = prescaler * b_counter + a_counter; -static const size_t vco_clock_rate = ref_clock_rate/r_counter * n_counter; //between 1400 and 1800 MHz -static const double master_clock_rate = vco_clock_rate/vco_divider; + const boost::uint64_t out_rate = boost::uint64_t(rate); + const boost::uint64_t ref_rate = boost::uint64_t(cs.get_ref_rate()); + const size_t gcd = size_t(boost::math::gcd(ref_rate, out_rate)); -static const size_t fpga_clock_divider = size_t(master_clock_rate/64e6); -static const size_t codec_clock_divider = size_t(master_clock_rate/64e6); + for (size_t i = 1; i <= 100; i++){ + const size_t X = i*ref_rate/gcd; + const size_t Y = i*out_rate/gcd; + + //determine A and B (P is fixed) + cs.b_counter = Y/cs.prescaler; + cs.a_counter = Y - cs.b_counter*cs.prescaler; + + static const double vco_bound_pad = 100e6; + for ( //calculate an r divider that fits into the bounds of the vco + cs.r_counter = size_t(cs.get_n_counter()*cs.get_ref_rate()/(1800e6 - vco_bound_pad)); + cs.r_counter <= size_t(cs.get_n_counter()*cs.get_ref_rate()/(1400e6 + vco_bound_pad)) + and cs.r_counter > 0; cs.r_counter++ + ){ + + //determine chan_div and vco_div + //and fill in that order of preference + cs.chan_divider = greatest_divisor<size_t>(X/cs.r_counter, 32); + cs.vco_divider = greatest_divisor<size_t>(X/cs.chan_divider/cs.r_counter, 6); + + //avoid a vco divider of 1 (if possible) + if (cs.vco_divider == 1){ + cs.vco_divider = least_divisor<size_t>(cs.chan_divider, 2); + cs.chan_divider /= cs.vco_divider; + } + + if (CLOCK_SETTINGS_DEBUG){ + std::cout << "gcd " << gcd << std::endl; + std::cout << "X " << X << std::endl; + std::cout << "Y " << Y << std::endl; + std::cout << cs.to_pp_string() << std::endl; + } + + //filter limits on the counters + if (cs.vco_divider == 1) continue; + if (cs.r_counter >= (1<<14)) continue; + if (cs.b_counter == 2) continue; + if (cs.b_counter == 1 and cs.a_counter != 0) continue; + if (cs.b_counter >= (1<<13)) continue; + if (cs.a_counter >= (1<<6)) continue; + + std::cout << "USRP-E100 clock control: " << i << std::endl << cs.to_pp_string() << std::endl; + return cs; + } + } + + throw std::runtime_error(str(boost::format( + "USRP-E100 clock control: could not calculate settings for clock rate %fMHz" + ) % (rate/1e6))); +} /*********************************************************************** * Clock Control Implementation @@ -62,35 +170,70 @@ class usrp_e100_clock_ctrl_impl : public usrp_e100_clock_ctrl{ public: usrp_e100_clock_ctrl_impl(usrp_e100_iface::sptr iface){ _iface = iface; + _chan_rate = 0.0; + _out_rate = 0.0; //init the clock gen registers //Note: out0 should already be clocking the FPGA or this isnt going to work _ad9522_regs.sdo_active = ad9522_regs_t::SDO_ACTIVE_SDO_SDIO; - _ad9522_regs.enable_clock_doubler = 1; //enable ref clock doubler _ad9522_regs.enb_stat_eeprom_at_stat_pin = 0; //use status pin _ad9522_regs.status_pin_control = 0x1; //n divider _ad9522_regs.ld_pin_control = 0x00; //dld _ad9522_regs.refmon_pin_control = 0x12; //show ref2 + _ad9522_regs.lock_detect_counter = ad9522_regs_t::LOCK_DETECT_COUNTER_16CYC; - _ad9522_regs.enable_ref2 = 1; - _ad9522_regs.enable_ref1 = 0; - _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF2; + this->use_internal_ref(); + + this->set_fpga_clock_rate(DEFAULT_OUTPUT_RATE); //initialize to something + + this->enable_test_clock(ENABLE_THE_TEST_OUT); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + } + + ~usrp_e100_clock_ctrl_impl(void){ + this->enable_test_clock(ENABLE_THE_TEST_OUT); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + } + + /*********************************************************************** + * Clock rate control: + * - set clock rate w/ internal VCO + * - set clock rate w/ external VCXO + **********************************************************************/ + void set_clock_settings_with_internal_vco(double rate){ + const clock_settings_type cs = get_clock_settings(rate); + + //set the rates to private variables so the implementation knows! + _chan_rate = cs.get_chan_rate(); + _out_rate = cs.get_out_rate(); - _ad9522_regs.set_r_counter(r_counter); - _ad9522_regs.a_counter = a_counter; - _ad9522_regs.set_b_counter(b_counter); + _ad9522_regs.enable_clock_doubler = (cs.ref_clock_doubler == 2)? 1 : 0; + + _ad9522_regs.set_r_counter(cs.r_counter); + _ad9522_regs.a_counter = cs.a_counter; + _ad9522_regs.set_b_counter(cs.b_counter); + UHD_ASSERT_THROW(cs.prescaler == 8); //assumes this below: _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV8_9; _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; - _ad9522_regs.vco_calibration_now = 1; //calibrate it! - _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV5; + _ad9522_regs.bypass_vco_divider = 0; + switch(cs.vco_divider){ + case 1: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV1; break; + case 2: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV2; break; + case 3: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV3; break; + case 4: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV4; break; + case 5: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV5; break; + case 6: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV6; break; + } _ad9522_regs.select_vco_or_clock = ad9522_regs_t::SELECT_VCO_OR_CLOCK_VCO; //setup fpga master clock _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; - set_clock_divider(fpga_clock_divider, + set_clock_divider(cs.chan_divider, _ad9522_regs.divider0_low_cycles, _ad9522_regs.divider0_high_cycles, _ad9522_regs.divider0_bypass @@ -98,52 +241,69 @@ public: //setup codec clock _ad9522_regs.out3_format = ad9522_regs_t::OUT3_FORMAT_LVDS; - set_clock_divider(codec_clock_divider, + set_clock_divider(cs.chan_divider, _ad9522_regs.divider1_low_cycles, _ad9522_regs.divider1_high_cycles, _ad9522_regs.divider1_bypass ); - //setup test clock (same divider as codec clock) - _ad9522_regs.out4_format = ad9522_regs_t::OUT4_FORMAT_CMOS; - _ad9522_regs.out4_cmos_configuration = (enable_test_clock)? - ad9522_regs_t::OUT4_CMOS_CONFIGURATION_A_ON : - ad9522_regs_t::OUT4_CMOS_CONFIGURATION_OFF; + this->send_all_regs(); + calibrate_now(); + } - //setup a list of register ranges to write - typedef std::pair<boost::uint16_t, boost::uint16_t> range_t; - static const std::vector<range_t> ranges = boost::assign::list_of - (range_t(0x000, 0x000)) (range_t(0x010, 0x01F)) - (range_t(0x0F0, 0x0FD)) (range_t(0x190, 0x19B)) - (range_t(0x1E0, 0x1E1)) (range_t(0x230, 0x230)) - ; + void set_clock_settings_with_external_vcxo(double rate){ + //set the rates to private variables so the implementation knows! + _chan_rate = rate; + _out_rate = rate; - //write initial register values and latch/update - BOOST_FOREACH(const range_t &range, ranges){ - for(boost::uint16_t addr = range.first; addr <= range.second; addr++){ - this->send_reg(addr); - } - } - this->latch_regs(); - //test read: - //boost::uint32_t reg = _ad9522_regs.get_read_reg(0x01b); - //boost::uint32_t result = _iface->transact_spi( - // UE_SPI_SS_AD9522, - // spi_config_t::EDGE_RISE, - // reg, 24, true /*no*/ - //); - //std::cout << "result " << std::hex << result << std::endl; - this->enable_rx_dboard_clock(false); - this->enable_tx_dboard_clock(false); + _ad9522_regs.enable_clock_doubler = 1; //doubler always on + const double ref_rate = REFERENCE_INPUT_RATE*2; + + //bypass prescaler such that N = B + long gcd = boost::math::gcd(long(ref_rate), long(rate)); + _ad9522_regs.set_r_counter(int(ref_rate/gcd)); + _ad9522_regs.a_counter = 0; + _ad9522_regs.set_b_counter(int(rate/gcd)); + _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV1; + + //setup external vcxo + _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; + _ad9522_regs.bypass_vco_divider = 1; + _ad9522_regs.select_vco_or_clock = ad9522_regs_t::SELECT_VCO_OR_CLOCK_EXTERNAL; + + //setup fpga master clock + _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; + _ad9522_regs.divider0_bypass = 1; + + //setup codec clock + _ad9522_regs.out3_format = ad9522_regs_t::OUT3_FORMAT_LVDS; + _ad9522_regs.divider1_bypass = 1; + + this->send_all_regs(); } - ~usrp_e100_clock_ctrl_impl(void){ - this->enable_rx_dboard_clock(false); - this->enable_tx_dboard_clock(false); + void set_fpga_clock_rate(double rate){ + if (_out_rate == rate) return; + if (rate == 61.44e6) set_clock_settings_with_external_vcxo(rate); + else set_clock_settings_with_internal_vco(rate); } double get_fpga_clock_rate(void){ - return master_clock_rate/fpga_clock_divider; + return this->_out_rate; + } + + /*********************************************************************** + * Special test clock output + **********************************************************************/ + void enable_test_clock(bool enb){ + //setup test clock (same divider as codec clock) + _ad9522_regs.out4_format = ad9522_regs_t::OUT4_FORMAT_CMOS; + _ad9522_regs.out4_cmos_configuration = (enb)? + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_A_ON : + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F0); + this->latch_regs(); } /*********************************************************************** @@ -161,13 +321,13 @@ public: std::vector<double> get_rx_dboard_clock_rates(void){ std::vector<double> rates; for(size_t div = 1; div <= 16+16; div++) - rates.push_back(master_clock_rate/div); + rates.push_back(this->_chan_rate/div); return rates; } void set_rx_dboard_clock_rate(double rate){ assert_has(get_rx_dboard_clock_rates(), rate, "rx dboard clock rate"); - size_t divider = size_t(master_clock_rate/rate); + size_t divider = size_t(this->_chan_rate/rate); //set the divider registers set_clock_divider(divider, _ad9522_regs.divider3_low_cycles, @@ -197,7 +357,7 @@ public: void set_tx_dboard_clock_rate(double rate){ assert_has(get_tx_dboard_clock_rates(), rate, "tx dboard clock rate"); - size_t divider = size_t(master_clock_rate/rate); + size_t divider = size_t(this->_chan_rate/rate); //set the divider registers set_clock_divider(divider, _ad9522_regs.divider2_low_cycles, @@ -238,6 +398,8 @@ public: private: usrp_e100_iface::sptr _iface; ad9522_regs_t _ad9522_regs; + double _out_rate; //rate at the fpga and codec + double _chan_rate; //rate before final dividers void latch_regs(void){ _ad9522_regs.io_update = 1; @@ -253,6 +415,46 @@ private: reg, 24, false /*no rb*/ ); } + + void calibrate_now(void){ + //vco calibration routine: + _ad9522_regs.vco_calibration_now = 0; + this->send_reg(0x18); + this->latch_regs(); + _ad9522_regs.vco_calibration_now = 1; + this->send_reg(0x18); + this->latch_regs(); + //wait for calibration done: + static const boost::uint8_t addr = 0x01F; + for (size_t ms10 = 0; ms10 < 100; ms10++){ + boost::uint32_t reg = _iface->transact_spi( + UE_SPI_SS_AD9522, spi_config_t::EDGE_RISE, + _ad9522_regs.get_read_reg(addr), 24, true /*rb*/ + ); + _ad9522_regs.set_reg(addr, reg); + if (_ad9522_regs.vco_calibration_finished) return; + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + } + std::cerr << "USRP-E100 clock control: VCO calibration timeout" << std::endl; + } + + void send_all_regs(void){ + //setup a list of register ranges to write + typedef std::pair<boost::uint16_t, boost::uint16_t> range_t; + static const std::vector<range_t> ranges = boost::assign::list_of + (range_t(0x000, 0x000)) (range_t(0x010, 0x01F)) + (range_t(0x0F0, 0x0FD)) (range_t(0x190, 0x19B)) + (range_t(0x1E0, 0x1E1)) (range_t(0x230, 0x230)) + ; + + //write initial register values and latch/update + BOOST_FOREACH(const range_t &range, ranges){ + for(boost::uint16_t addr = range.first; addr <= range.second; addr++){ + this->send_reg(addr); + } + } + this->latch_regs(); + } }; /*********************************************************************** diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.hpp b/host/lib/usrp/usrp_e100/clock_ctrl.hpp index d613d1473..1f9960ce4 100644 --- a/host/lib/usrp/usrp_e100/clock_ctrl.hpp +++ b/host/lib/usrp/usrp_e100/clock_ctrl.hpp @@ -40,6 +40,13 @@ public: static sptr make(usrp_e100_iface::sptr iface); /*! + * Set the rate of the fpga clock line. + * Throws if rate is not valid. + * \param rate the new rate in Hz + */ + virtual void set_fpga_clock_rate(double rate) = 0; + + /*! * Get the rate of the fpga clock line. * \return the fpga clock rate in Hz */ diff --git a/host/lib/usrp/usrp_e100/fpga-downloader.cc b/host/lib/usrp/usrp_e100/fpga_downloader.cpp index 4a3d3b9af..c0013fcbd 100644 --- a/host/lib/usrp/usrp_e100/fpga-downloader.cc +++ b/host/lib/usrp/usrp_e100/fpga_downloader.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -43,6 +43,8 @@ * */ +namespace usrp_e_fpga_downloader_utility{ + const unsigned int PROG_B = 175; const unsigned int DONE = 173; const unsigned int INIT_B = 114; @@ -209,11 +211,10 @@ static void send_file_to_fpga(const std::string &file_name, gpio &error, gpio &d { std::ifstream bitstream; - std::cout << "File name - " << file_name.c_str() << std::endl; - bitstream.open(file_name.c_str(), std::ios::binary); - if (!bitstream.is_open()) - std::cout << "File " << file_name << " not opened succesfully." << std::endl; + if (!bitstream.is_open()) throw std::runtime_error( + "Coult not open the file: " + file_name + ); spidev spi("/dev/spidev1.0"); char buf[BUF_SIZE]; @@ -232,35 +233,20 @@ static void send_file_to_fpga(const std::string &file_name, gpio &error, gpio &d } while (bitstream.gcount() == BUF_SIZE); } -/* -int main(int argc, char *argv[]) -{ - - gpio gpio_prog_b(PROG_B, OUT); - gpio gpio_init_b(INIT_B, IN); - gpio gpio_done (DONE, IN); - - if (argc == 2) - bit_file = argv[1]; - - std::cout << "FPGA config file: " << bit_file << std::endl; - - prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); - - std::cout << "Done = " << gpio_done.get_value() << std::endl; - - send_file_to_fpga(bit_file, gpio_init_b, gpio_done); -} -*/ +}//namespace usrp_e_fpga_downloader_utility void usrp_e100_load_fpga(const std::string &bin_file){ + using namespace usrp_e_fpga_downloader_utility; + gpio gpio_prog_b(PROG_B, OUT); gpio gpio_init_b(INIT_B, IN); gpio gpio_done (DONE, IN); std::cout << "Loading FPGA image: " << bin_file << "... " << std::flush; - UHD_ASSERT_THROW(std::system("/sbin/rmmod usrp_e") == 0); + if(std::system("/sbin/rmmod usrp_e") != 0){ + std::cerr << "USRP-E100 FPGA downloader: could not unload usrp_e module" << std::endl; + } prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); @@ -268,7 +254,9 @@ void usrp_e100_load_fpga(const std::string &bin_file){ send_file_to_fpga(bin_file, gpio_init_b, gpio_done); - UHD_ASSERT_THROW(std::system("/sbin/modprobe usrp_e") == 0); + if(std::system("/sbin/modprobe usrp_e") != 0){ + std::cerr << "USRP-E100 FPGA downloader: could not load usrp_e module" << std::endl; + } } diff --git a/host/lib/usrp/usrp_e100/io_impl.cpp b/host/lib/usrp/usrp_e100/io_impl.cpp index cf2410e4f..5fb2da7b8 100644 --- a/host/lib/usrp/usrp_e100/io_impl.cpp +++ b/host/lib/usrp/usrp_e100/io_impl.cpp @@ -35,7 +35,8 @@ zero_copy_if::sptr usrp_e100_make_mmap_zero_copy(usrp_e100_iface::sptr iface); /*********************************************************************** * Constants **********************************************************************/ -static const size_t tx_async_report_sid = 1; +static const size_t rx_data_inline_sid = 1; +static const size_t tx_async_report_sid = 2; static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET; static const bool recv_debug = false; @@ -109,8 +110,17 @@ void usrp_e100_impl::io_impl::recv_pirate_loop(usrp_e100_clock_ctrl::sptr clock_ const boost::uint32_t *vrt_hdr = buff->cast<const boost::uint32_t *>(); vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info); + //handle an rx data packet or inline message + if (if_packet_info.sid == rx_data_inline_sid){ + if (recv_debug) std::cout << "this is rx_data_inline_sid\n"; + //same number of frames as the data transport -> always immediate + recv_pirate_booty.push_with_wait(buff); + continue; + } + //handle a tx async report message if (if_packet_info.sid == tx_async_report_sid and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ + if (recv_debug) std::cout << "this is tx_async_report_sid\n"; //fill in the async metadata async_metadata_t metadata; @@ -127,8 +137,7 @@ void usrp_e100_impl::io_impl::recv_pirate_loop(usrp_e100_clock_ctrl::sptr clock_ continue; } - //same number of frames as the data transport -> always immediate - recv_pirate_booty.push_with_wait(buff); + if (recv_debug) std::cout << "this is unknown packet\n"; }catch(const std::exception &e){ std::cerr << "Error (usrp-e recv pirate loop): " << e.what() << std::endl; @@ -152,17 +161,20 @@ void usrp_e100_impl::io_init(void){ //setup before the registers (transport called to calculate max spp) _io_impl = UHD_PIMPL_MAKE(io_impl, (_iface)); + //clear state machines + _iface->poke32(UE_REG_CTRL_RX_CLEAR, 0); + _iface->poke32(UE_REG_CTRL_TX_CLEAR, 0); + //setup rx data path _iface->poke32(UE_REG_CTRL_RX_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); _iface->poke32(UE_REG_CTRL_RX_NCHANNELS, 1); - _iface->poke32(UE_REG_CTRL_RX_CLEAR_OVERRUN, 1); //reset _iface->poke32(UE_REG_CTRL_RX_VRT_HEADER, 0 | (0x1 << 28) //if data with stream id | (0x1 << 26) //has trailer | (0x3 << 22) //integer time other | (0x1 << 20) //fractional time sample count ); - _iface->poke32(UE_REG_CTRL_RX_VRT_STREAM_ID, 0); + _iface->poke32(UE_REG_CTRL_RX_VRT_STREAM_ID, rx_data_inline_sid); _iface->poke32(UE_REG_CTRL_RX_VRT_TRAILER, 0); //setup the tx policy @@ -184,7 +196,6 @@ void usrp_e100_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd){ void usrp_e100_impl::handle_overrun(size_t){ std::cerr << "O"; //the famous OOOOOOOOOOO - _iface->poke32(UE_REG_CTRL_RX_CLEAR_OVERRUN, 0); if (_io_impl->continuous_streaming){ this->issue_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); } diff --git a/host/lib/usrp/usrp_e100/mboard_impl.cpp b/host/lib/usrp/usrp_e100/mboard_impl.cpp index f52d2e6fb..0e08cd435 100644 --- a/host/lib/usrp/usrp_e100/mboard_impl.cpp +++ b/host/lib/usrp/usrp_e100/mboard_impl.cpp @@ -152,6 +152,10 @@ void usrp_e100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; } + case MBOARD_PROP_CLOCK_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -211,6 +215,10 @@ void usrp_e100_impl::mboard_set(const wax::obj &key, const wax::obj &val){ update_clock_config(); return; + case MBOARD_PROP_CLOCK_RATE: + _clock_ctrl->set_fpga_clock_rate(val.as<double>()); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } diff --git a/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp b/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp index 40c7afabb..ad36dd97a 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010-2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,6 +16,7 @@ // #include "usrp_e100_iface.hpp" +#include "usrp_e100_regs.hpp" #include <uhd/utils/assert.hpp> #include <sys/ioctl.h> //ioctl #include <fcntl.h> //open, close @@ -108,6 +109,9 @@ public: throw std::runtime_error("Failed to open " + node); } + //very first thing, reset all the wishbone, always do first! + this->poke32(UE_REG_CLEAR_GLOBAL, 0); + mb_eeprom = mboard_eeprom_t(get_i2c_dev_iface(), mboard_eeprom_t::MAP_E100); } diff --git a/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp b/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp index 2dc401305..897616320 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp @@ -30,7 +30,7 @@ #ifndef INCLUDED_USRP_E100_IMPL_HPP #define INCLUDED_USRP_E100_IMPL_HPP -static const boost::uint16_t USRP_E_COMPAT_NUM = 0x02; //make this 3 then the mainline fpga image gets fixed for embedded +static const boost::uint16_t USRP_E_COMPAT_NUM = 0x03; //! load an fpga image from a bin file into the usrp-e fpga extern void usrp_e100_load_fpga(const std::string &bin_file); diff --git a/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp b/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp index a57fe5171..a030462d0 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp +++ b/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp @@ -17,7 +17,6 @@ // Slave pointers #define UE_REG_SLAVE(n) ((n)<<7) -#define UE_REG_SR_ADDR(n) ((UE_REG_SLAVE(5)) + (4*(n))) ///////////////////////////////////////////////////// // Slave 0 -- Misc Regs @@ -89,16 +88,6 @@ #define GPIO_SEL_DEBUG_0 0 // if pin is an output, debug lines from FPGA fabric #define GPIO_SEL_DEBUG_1 1 // if pin is an output, debug lines from FPGA fabric - -//////////////////////////////////////////////////// -// Slave 5 -- Settings Bus -// -// Output-only, no readback, 32 registers total -// Each register must be written 32 bits at a time -// First the address xxx_xx00 and then xxx_xx10 - -#define UE_REG_SETTINGS_BASE UE_REG_SLAVE(5) - /////////////////////////////////////////////////// // Slave 6 -- ATR Controller // 16 regs @@ -123,48 +112,72 @@ #define UE_REG_RB_TIME_NOW_TICKS UE_REG_RB_MUX_32_BASE + 4 #define UE_REG_RB_TIME_PPS_SECS UE_REG_RB_MUX_32_BASE + 8 #define UE_REG_RB_TIME_PPS_TICKS UE_REG_RB_MUX_32_BASE + 12 +#define UE_REG_RB_MISC_TEST32 UE_REG_RB_MUX_32_BASE + 16 + +//////////////////////////////////////////////////// +// Slave 8 -- Settings Bus +// +// Output-only, no readback, 64 registers total +// Each register must be written 64 bits at a time +// First the address xxx_xx00 and then xxx_xx10 + +#define UE_REG_SETTINGS_BASE_ADDR(n) (UE_REG_SLAVE(8) + (4*(n))) + +#define UE_REG_SR_MISC_TEST32 UE_REG_SETTINGS_BASE_ADDR(52) + +///////////////////////////////////////////////// +// Magic reset regs +//////////////////////////////////////////////// +#define UE_REG_CLEAR_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(48) + (4*(n))) +#define UE_REG_CLEAR_RX UE_REG_CLEAR_ADDR(0) +#define UE_REG_CLEAR_TX UE_REG_CLEAR_ADDR(1) +#define UE_REG_CLEAR_GLOBAL UE_REG_CLEAR_ADDR(2) ///////////////////////////////////////////////// // DSP RX Regs //////////////////////////////////////////////// -#define UE_REG_DSP_RX_FREQ UE_REG_SR_ADDR(0) -#define UE_REG_DSP_RX_SCALE_IQ UE_REG_SR_ADDR(1) // {scale_i,scale_q} -#define UE_REG_DSP_RX_DECIM_RATE UE_REG_SR_ADDR(2) // hb and decim rate -#define UE_REG_DSP_RX_DCOFFSET_I UE_REG_SR_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic -#define UE_REG_DSP_RX_DCOFFSET_Q UE_REG_SR_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits -#define UE_REG_DSP_RX_MUX UE_REG_SR_ADDR(5) +#define UE_REG_DSP_RX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(16) + (4*(n))) +#define UE_REG_DSP_RX_FREQ UE_REG_DSP_RX_ADDR(0) +#define UE_REG_DSP_RX_SCALE_IQ UE_REG_DSP_RX_ADDR(1) // {scale_i,scale_q} +#define UE_REG_DSP_RX_DECIM_RATE UE_REG_DSP_RX_ADDR(2) // hb and decim rate +#define UE_REG_DSP_RX_DCOFFSET_I UE_REG_DSP_RX_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic +#define UE_REG_DSP_RX_DCOFFSET_Q UE_REG_DSP_RX_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits +#define UE_REG_DSP_RX_MUX UE_REG_DSP_RX_ADDR(5) /////////////////////////////////////////////////// // VITA RX CTRL regs /////////////////////////////////////////////////// +#define UE_REG_CTRL_RX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(0) + (4*(n))) // The following 3 are logically a single command register. // They are clocked into the underlying fifo when time_ticks is written. -#define UE_REG_CTRL_RX_STREAM_CMD UE_REG_SR_ADDR(8) // {now, chain, num_samples(30) -#define UE_REG_CTRL_RX_TIME_SECS UE_REG_SR_ADDR(9) -#define UE_REG_CTRL_RX_TIME_TICKS UE_REG_SR_ADDR(10) -#define UE_REG_CTRL_RX_CLEAR_OVERRUN UE_REG_SR_ADDR(11) // write anything to clear overrun -#define UE_REG_CTRL_RX_VRT_HEADER UE_REG_SR_ADDR(12) // word 0 of packet. FPGA fills in packet counter -#define UE_REG_CTRL_RX_VRT_STREAM_ID UE_REG_SR_ADDR(13) // word 1 of packet. -#define UE_REG_CTRL_RX_VRT_TRAILER UE_REG_SR_ADDR(14) -#define UE_REG_CTRL_RX_NSAMPS_PER_PKT UE_REG_SR_ADDR(15) -#define UE_REG_CTRL_RX_NCHANNELS UE_REG_SR_ADDR(16) // 1 in basic case, up to 4 for vector sources +#define UE_REG_CTRL_RX_STREAM_CMD UE_REG_CTRL_RX_ADDR(0) // {now, chain, num_samples(30) +#define UE_REG_CTRL_RX_TIME_SECS UE_REG_CTRL_RX_ADDR(1) +#define UE_REG_CTRL_RX_TIME_TICKS UE_REG_CTRL_RX_ADDR(2) +#define UE_REG_CTRL_RX_CLEAR UE_REG_CTRL_RX_ADDR(3) // write anything to clear +#define UE_REG_CTRL_RX_VRT_HEADER UE_REG_CTRL_RX_ADDR(4) // word 0 of packet. FPGA fills in packet counter +#define UE_REG_CTRL_RX_VRT_STREAM_ID UE_REG_CTRL_RX_ADDR(5) // word 1 of packet. +#define UE_REG_CTRL_RX_VRT_TRAILER UE_REG_CTRL_RX_ADDR(6) +#define UE_REG_CTRL_RX_NSAMPS_PER_PKT UE_REG_CTRL_RX_ADDR(7) +#define UE_REG_CTRL_RX_NCHANNELS UE_REG_CTRL_RX_ADDR(8) // 1 in basic case, up to 4 for vector sources ///////////////////////////////////////////////// // DSP TX Regs //////////////////////////////////////////////// -#define UE_REG_DSP_TX_FREQ UE_REG_SR_ADDR(17) -#define UE_REG_DSP_TX_SCALE_IQ UE_REG_SR_ADDR(18) // {scale_i,scale_q} -#define UE_REG_DSP_TX_INTERP_RATE UE_REG_SR_ADDR(19) -#define UE_REG_DSP_TX_UNUSED UE_REG_SR_ADDR(20) -#define UE_REG_DSP_TX_MUX UE_REG_SR_ADDR(21) +#define UE_REG_DSP_TX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(32) + (4*(n))) +#define UE_REG_DSP_TX_FREQ UE_REG_DSP_TX_ADDR(0) +#define UE_REG_DSP_TX_SCALE_IQ UE_REG_DSP_TX_ADDR(1) // {scale_i,scale_q} +#define UE_REG_DSP_TX_INTERP_RATE UE_REG_DSP_TX_ADDR(2) +#define UE_REG_DSP_TX_UNUSED UE_REG_DSP_TX_ADDR(3) +#define UE_REG_DSP_TX_MUX UE_REG_DSP_TX_ADDR(4) ///////////////////////////////////////////////// // VITA TX CTRL regs //////////////////////////////////////////////// -#define UE_REG_CTRL_TX_NCHANNELS UE_REG_SR_ADDR(24) -#define UE_REG_CTRL_TX_CLEAR_UNDERRUN UE_REG_SR_ADDR(25) -#define UE_REG_CTRL_TX_REPORT_SID UE_REG_SR_ADDR(26) -#define UE_REG_CTRL_TX_POLICY UE_REG_SR_ADDR(27) +#define UE_REG_CTRL_TX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(24) + (4*(n))) +#define UE_REG_CTRL_TX_NCHANNELS UE_REG_CTRL_TX_ADDR(0) +#define UE_REG_CTRL_TX_CLEAR UE_REG_CTRL_TX_ADDR(1) +#define UE_REG_CTRL_TX_REPORT_SID UE_REG_CTRL_TX_ADDR(2) +#define UE_REG_CTRL_TX_POLICY UE_REG_CTRL_TX_ADDR(3) #define UE_FLAG_CTRL_TX_POLICY_WAIT (0x1 << 0) #define UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET (0x1 << 1) @@ -189,11 +202,12 @@ * * </pre> */ -#define UE_REG_TIME64_SECS UE_REG_SR_ADDR(28) // value to set absolute secs to on next PPS -#define UE_REG_TIME64_TICKS UE_REG_SR_ADDR(29) // value to set absolute ticks to on next PPS -#define UE_REG_TIME64_FLAGS UE_REG_SR_ADDR(30) // flags - see chart above -#define UE_REG_TIME64_IMM UE_REG_SR_ADDR(31) // set immediate (0=latch on next pps, 1=latch immediate, default=0) -#define UE_REG_TIME64_TPS UE_REG_SR_ADDR(31) // clock ticks per second (counter rollover) +#define UE_REG_TIME64_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(40) + (4*(n))) +#define UE_REG_TIME64_SECS UE_REG_TIME64_ADDR(0) // value to set absolute secs to on next PPS +#define UE_REG_TIME64_TICKS UE_REG_TIME64_ADDR(1) // value to set absolute ticks to on next PPS +#define UE_REG_TIME64_FLAGS UE_REG_TIME64_ADDR(2) // flags - see chart above +#define UE_REG_TIME64_IMM UE_REG_TIME64_ADDR(3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) +#define UE_REG_TIME64_TPS UE_REG_TIME64_ADDR(4) // clock ticks per second (counter rollover) //pps flags (see above) #define UE_FLAG_TIME64_PPS_NEGEDGE (0 << 0) diff --git a/host/usrp_e_utils/CMakeLists.txt b/host/usrp_e_utils/CMakeLists.txt new file mode 100644 index 000000000..5123af592 --- /dev/null +++ b/host/usrp_e_utils/CMakeLists.txt @@ -0,0 +1,51 @@ +# +# Copyright 2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# USRP embedded utilities that get installed into the share path +######################################################################## +IF(CMAKE_SYSTEM_NAME STREQUAL "Linux") + SET(LINUX_TARGET TRUE) +ENDIF(CMAKE_SYSTEM_NAME STREQUAL "Linux") + +LIBUHD_REGISTER_COMPONENT("USRP-E Utils" ENABLE_USRP_E_UTILS OFF "LINUX_TARGET" OFF) + +IF(ENABLE_USRP_E_UTILS) + ENABLE_LANGUAGE(C) + INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100/include) + INCLUDE_DIRECTORIES(${CMAKE_BINARY_DIR}/lib/ic_reg_maps) + + SET(usrp_e_utils_sources + usrp-e-utility.cpp + usrp-e-loopback.c + usrp-e-wb-test.cpp + usrp-e-debug-pins.c + usrp-e-i2c.c + usrp-e-spi.c + ) + + #for each source: build an executable and install + FOREACH(util_source ${usrp_e_utils_sources}) + GET_FILENAME_COMPONENT(util_name ${util_source} NAME_WE) + ADD_EXECUTABLE(${util_name} ${util_source}) + TARGET_LINK_LIBRARIES(${util_name} ${Boost_LIBRARIES}) + INSTALL(TARGETS ${util_name} RUNTIME DESTINATION ${PKG_DATA_DIR}/usrp_e_utils) + ENDFOREACH(util_source) + +ENDIF(ENABLE_USRP_E_UTILS) diff --git a/host/utils/clkgen-config.cpp b/host/usrp_e_utils/clkgen_config.hpp index e8279b4ae..f39f8bb19 100644 --- a/host/utils/clkgen-config.cpp +++ b/host/usrp_e_utils/clkgen_config.hpp @@ -1,24 +1,22 @@ -/* -*- c++ -*- */ -/* - * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc. - * - * This file is part of UHD - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. -*/ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef USRP_E_UTILS_CLKGEN_CONFIG_HPP +#define USRP_E_UTILS_CLKGEN_CONFIG_HPP #include <iostream> #include <sstream> @@ -33,6 +31,7 @@ #include <linux/spi/spidev.h> +namespace usrp_e_clkgen_config_utility{ // Programming data for clock gen chip static const unsigned int config_data[] = { @@ -73,7 +72,7 @@ static const unsigned int config_data[] = { 0x019021, 0x019100, 0x019200, - 0x019333, + 0x019321, 0x019400, 0x019500, 0x019611, @@ -157,6 +156,7 @@ class spidev { }; gpio::gpio(unsigned int _gpio_num, gpio_direction pin_direction, bool close_action) +:close_action(close_action) { std::fstream export_file; @@ -264,10 +264,10 @@ void spidev::send(char *buf, char *rbuf, unsigned int nbytes) tr.rx_buf = (unsigned long) rbuf; tr.len = nbytes; tr.delay_usecs = 0; - tr.speed_hz = 12000000; + tr.speed_hz = 12000; tr.bits_per_word = 24; - ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); + ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); } @@ -278,19 +278,28 @@ static void send_config_to_clkgen(gpio &chip_select, const unsigned int data[], for (unsigned int i = 0; i < data_size; i++) { - std::cout << "sending " << std::hex << data[i] << std::endl; + //std::cout << "sending " << std::hex << data[i] << std::endl; chip_select.set_value(0); spi.send((char *)&data[i], (char *)&rbuf, 4); chip_select.set_value(1); - + unsigned int addr = (data[i] >> 8) & 0xfff; + if (addr == 0x232 || addr == 0x000){ + std::cout << "." << std::flush; + sleep(1); + } }; + std::cout << std::endl; } -int main(int argc, char *argv[]) -{ +}//namespace usrp_e_clkgen_config_utility +//int main(int argc, char *argv[]) +static void clock_genconfig_main(void) +{ + using namespace usrp_e_clkgen_config_utility; gpio clkgen_select(CLKGEN_SELECT, OUT, true); - send_config_to_clkgen(clkgen_select, config_data, sizeof(config_data)/sizeof(unsigned int)); + send_config_to_clkgen(clkgen_select, config_data, sizeof(config_data)/sizeof(config_data[0])); } +#endif /*USRP_E_UTILS_CLKGEN_CONFIG_HPP*/ diff --git a/host/utils/usrp-e-debug-pins.c b/host/usrp_e_utils/usrp-e-debug-pins.c index 94f898b67..94f898b67 100644 --- a/host/utils/usrp-e-debug-pins.c +++ b/host/usrp_e_utils/usrp-e-debug-pins.c diff --git a/host/utils/usrp-e-i2c.c b/host/usrp_e_utils/usrp-e-i2c.c index c6fd4c632..c6fd4c632 100644 --- a/host/utils/usrp-e-i2c.c +++ b/host/usrp_e_utils/usrp-e-i2c.c diff --git a/host/utils/usrp-e-loopback.c b/host/usrp_e_utils/usrp-e-loopback.c index 454d81ba7..454d81ba7 100644 --- a/host/utils/usrp-e-loopback.c +++ b/host/usrp_e_utils/usrp-e-loopback.c diff --git a/host/utils/usrp-e-spi.c b/host/usrp_e_utils/usrp-e-spi.c index 5203f56a8..5203f56a8 100644 --- a/host/utils/usrp-e-spi.c +++ b/host/usrp_e_utils/usrp-e-spi.c diff --git a/host/usrp_e_utils/usrp-e-utility.cpp b/host/usrp_e_utils/usrp-e-utility.cpp new file mode 100644 index 000000000..b926cf49d --- /dev/null +++ b/host/usrp_e_utils/usrp-e-utility.cpp @@ -0,0 +1,75 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/safe_main.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <stdexcept> +#include <iostream> + +#include "fpga_downloader.cpp" +#include "clkgen_config.hpp" + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + + //variables to be set by po + std::string fpga_path; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("fpga", po::value<std::string>(&fpga_path), "loads the specified FPGA file") + ("reclk", "runs the clock recovery") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD USRP-E Utility %s") % desc << std::endl; + return ~0; + } + + bool loaded_fpga_image = false; + if (vm.count("fpga") != 0){ + std::cout << "USRP-E Utility loading the FPGA..." << std::endl << std::endl; + usrp_e100_load_fpga(fpga_path); + loaded_fpga_image = true; + sleep(1); + } + + if (vm.count("reclk") != 0){ + std::cout << "USRP-E Utility running the clock recovery..." << std::flush; + //if an image was not loaded or specified, we load pass-through + if (fpga_path.empty()) throw std::runtime_error( + "Please specify the path to the pass-though FPGA image for your device.\n" + " usrp-e-utility --reclk --fpga=/usr/share/uhd/images/usrp_e1xx_pt_fpga.bin" + ); + clock_genconfig_main(); + if (std::system("rm /tmp/usrp*hash") != 0){ //clear hash so driver must reload + std::cerr << "No hash to remove! Don't worry, its not a problem." << std::endl; + } + } + + std::cout << "Done!" << std::endl; + + return 0; +} diff --git a/host/usrp_e_utils/usrp-e-wb-test.cpp b/host/usrp_e_utils/usrp-e-wb-test.cpp new file mode 100644 index 000000000..3d6a8d101 --- /dev/null +++ b/host/usrp_e_utils/usrp-e-wb-test.cpp @@ -0,0 +1,115 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <cstdlib> +#include <cstdio> +#include <ctime> +#include <iostream> + +#include <sys/ioctl.h> //ioctl +#include <fcntl.h> //open, close + +#include <linux/usrp_e.h> +#include "usrp_e100_regs.hpp" + +static const size_t num_test_iters = 10000000; + +static int fp; + +static int peek16(int reg){ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL16, &d); + return d.buf[0]; +} + +static void poke16(int reg, int val){ + int ret; + struct usrp_e_ctl16 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL16, &d); +} + +static int peek32(int reg){ + int ret; + struct usrp_e_ctl32 d; + + d.offset = reg; + d.count = 1; + ret = ioctl(fp, USRP_E_READ_CTL32, &d); + return d.buf[0]; +} + +static void poke32(int reg, int val){ + int ret; + struct usrp_e_ctl32 d; + + d.offset = reg; + d.count = 1; + d.buf[0] = val; + ret = ioctl(fp, USRP_E_WRITE_CTL32, &d); +} + +int main(int, char *[]){ + + srandom(time(NULL)); //seed random() + + if ((fp = ::open("/dev/usrp_e0", O_RDWR)) < 0){ + std::cerr << "Open failed" << std::endl; + return -1; + } + + size_t num_pass = 0, num_fail = 0; + for (size_t i = 0; i < num_test_iters; i++){ + if(i%1000000 == 0) { + std::cout << "num pass: " << num_pass; + std::cout << "\tnum fail: " << num_fail << std::endl; + } + //make random values + int random_test32 = ::random(); + int random_test16 = ::random() & 0xffff; + int random_secs = ::random(); + + //set a bunch of registers + poke16(UE_REG_MISC_TEST, random_test16); + poke32(UE_REG_SR_MISC_TEST32, random_test32); + poke32(UE_REG_TIME64_TICKS, 0); + poke32(UE_REG_TIME64_IMM, 1); //immediate + poke32(UE_REG_TIME64_SECS, random_secs); + + //read a bunch of registers + if ( + (peek16(UE_REG_MISC_TEST) == random_test16) and + (peek32(UE_REG_RB_MISC_TEST32) == random_test32) and + (peek32(UE_REG_RB_TIME_NOW_SECS) == random_secs) and +// (peek32(UE_REG_RB_TIME_NOW_TICKS) < 1000000) and + true) num_pass++; + else num_fail++; + } + + std::cout << "num pass: " << num_pass << std::endl; + std::cout << "num fail: " << num_fail << std::endl; + + ::close(fp); + return 0; +} diff --git a/host/utils/CMakeLists.txt b/host/utils/CMakeLists.txt index 2df1c3529..53527c03d 100644 --- a/host/utils/CMakeLists.txt +++ b/host/utils/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2010 Ettus Research LLC +# Copyright 2010-2011 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -45,20 +45,6 @@ IF(ENABLE_USRP1) ) ENDIF(ENABLE_USRP1) -IF(ENABLE_USRP_E100) - ENABLE_LANGUAGE(C) - INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100) - INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100/include) - LIST(APPEND util_share_sources - fpga-downloader.cpp - clkgen-config.cpp - usrp-e-loopback.c - usrp-e-debug-pins.c - usrp-e-i2c.c - usrp-e-spi.c - ) -ENDIF(ENABLE_USRP_E100) - #for each source: build an executable and install FOREACH(util_source ${util_share_sources}) GET_FILENAME_COMPONENT(util_name ${util_source} NAME_WE) diff --git a/host/utils/fpga-downloader.cpp b/host/utils/fpga-downloader.cpp deleted file mode 100644 index 80ee71600..000000000 --- a/host/utils/fpga-downloader.cpp +++ /dev/null @@ -1,267 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2003,2004,2008,2009 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with GNU Radio; see the file COPYING. If not, write to - * the Free Software Foundation, Inc., 51 Franklin Street, - * Boston, MA 02110-1301, USA. -*/ - -#include <iostream> -#include <sstream> -#include <fstream> -#include <string> -#include <cstdlib> - -#include <fcntl.h> -#include <errno.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/ioctl.h> - -#include <linux/spi/spidev.h> - -/* - * Configuration connections - * - * CCK - MCSPI1_CLK - * DIN - MCSPI1_MOSI - * PROG_B - GPIO_175 - output (change mux) - * DONE - GPIO_173 - input (change mux) - * INIT_B - GPIO_114 - input (change mux) - * -*/ - -const unsigned int PROG_B = 175; -const unsigned int DONE = 173; -const unsigned int INIT_B = 114; - -static std::string bit_file = "safe_u1e.bin"; - -const int BUF_SIZE = 4096; - -enum gpio_direction {IN, OUT}; - -class gpio { - public: - - gpio(unsigned int gpio_num, gpio_direction pin_direction); - - bool get_value(); - void set_value(bool state); - - private: - - std::stringstream base_path; - std::fstream value_file; -}; - -class spidev { - public: - - spidev(std::string dev_name); - ~spidev(); - - void send(char *wbuf, char *rbuf, unsigned int nbytes); - - private: - - int fd; - -}; - -gpio::gpio(unsigned int gpio_num, gpio_direction pin_direction) -{ - std::fstream export_file; - - export_file.open("/sys/class/gpio/export", std::ios::out); - if (!export_file.is_open()) ///\todo Poor error handling - std::cout << "Failed to open gpio export file." << std::endl; - - export_file << gpio_num << std::endl; - - base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; - - std::fstream direction_file; - std::string direction_file_name; - - direction_file_name = base_path.str() + "/direction"; - - direction_file.open(direction_file_name.c_str()); - if (!direction_file.is_open()) - std::cout << "Failed to open direction file." << std::endl; - if (pin_direction == OUT) - direction_file << "out" << std::endl; - else - direction_file << "in" << std::endl; - - std::string value_file_name; - - value_file_name = base_path.str() + "/value"; - - value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); - if (!value_file.is_open()) - std::cout << "Failed to open value file." << std::endl; -} - -bool gpio::get_value() -{ - - std::string val; - - std::getline(value_file, val); - value_file.seekg(0); - - if (val == "0") - return false; - else if (val == "1") - return true; - else - std::cout << "Data read from value file|" << val << "|" << std::endl; - - return false; -} - -void gpio::set_value(bool state) -{ - - if (state) - value_file << "1" << std::endl; - else - value_file << "0" << std::endl; -} - -static void prepare_fpga_for_configuration(gpio &prog, gpio &init) -{ - - prog.set_value(true); - prog.set_value(false); - prog.set_value(true); - -#if 0 - bool ready_to_program(false); - unsigned int count(0); - do { - ready_to_program = init.get_value(); - count++; - - sleep(1); - } while (count < 10 && !ready_to_program); - - if (count == 10) { - std::cout << "FPGA not ready for programming." << std::endl; - exit(-1); - } -#endif -} - -spidev::spidev(std::string fname) -{ - int ret; - int mode = 0; - int speed = 12000000; - int bits = 8; - - fd = open(fname.c_str(), O_RDWR); - - ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); - ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); - ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); -} - - -spidev::~spidev() -{ - close(fd); -} - -void spidev::send(char *buf, char *rbuf, unsigned int nbytes) -{ - int ret; - - struct spi_ioc_transfer tr; - tr.tx_buf = (unsigned long) buf; - tr.rx_buf = (unsigned long) rbuf; - tr.len = nbytes; - tr.delay_usecs = 0; - tr.speed_hz = 48000000; - tr.bits_per_word = 8; - - ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); - -} - -static void send_file_to_fpga(std::string &file_name, gpio &error, gpio &done) -{ - std::ifstream bitstream; - - std::cout << "File name - " << file_name.c_str() << std::endl; - - bitstream.open(file_name.c_str(), std::ios::binary); - if (!bitstream.is_open()) - std::cout << "File " << file_name << " not opened succesfully." << std::endl; - - spidev spi("/dev/spidev1.0"); - char buf[BUF_SIZE]; - char rbuf[BUF_SIZE]; - - do { - bitstream.read(buf, BUF_SIZE); - spi.send(buf, rbuf, bitstream.gcount()); - - if (error.get_value()) - std::cout << "INIT_B went high, error occured." << std::endl; - - if (!done.get_value()) - std::cout << "Configuration complete." << std::endl; - - } while (bitstream.gcount() == BUF_SIZE); -} - -int main(int argc, char *argv[]) -{ - - gpio gpio_prog_b(PROG_B, OUT); - gpio gpio_init_b(INIT_B, IN); - gpio gpio_done (DONE, IN); - - if (argc == 2) - bit_file = argv[1]; - - bool module_found(false); - std::ifstream mod_file("/proc/modules"); - while (!mod_file.eof()) { - std::string line; - getline(mod_file, line); - if (line.find("usrp_e") != std::string::npos) - module_found = true; - } - mod_file.close(); - - if (module_found) { - std::cout << "USRP Embedded kernel module loaded, not loading FPGA." << std::endl; - return -1; - } - - std::cout << "FPGA config file: " << bit_file << std::endl; - - prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); - - std::cout << "Done = " << gpio_done.get_value() << std::endl; - - send_file_to_fpga(bit_file, gpio_init_b, gpio_done); -} - diff --git a/images/Makefile b/images/Makefile index 34c18cdc2..cfc783ee4 100644 --- a/images/Makefile +++ b/images/Makefile @@ -152,6 +152,22 @@ $(_usrp_e100_fpga_bin): $(GLOBAL_DEPS) endif ######################################################################## +# USRP-E100 pass-through fpga +######################################################################## +ifdef HAS_XTCLSH + +_usrp_e100_pt_fpga_dir = $(TOP_FPGA_DIR)/usrp2/top/u1e_passthru +_usrp_e100_pt_fpga_bin = $(BUILT_IMAGES_DIR)/usrp_e100_pt_fpga.bin +IMAGES_LIST += $(_usrp_e100_pt_fpga_bin) + +$(_usrp_e100_pt_fpga_bin): $(GLOBAL_DEPS) + cd $(_usrp_e100_pt_fpga_dir) && make clean + cd $(_usrp_e100_pt_fpga_dir) && make bin + cp $(_usrp_e100_pt_fpga_dir)/build/passthru.bin $@ + +endif + +######################################################################## # Build rules ######################################################################## images: $(IMAGES_LIST) |