summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--usrp2/vrt/vita_tx_tb.v226
1 files changed, 63 insertions, 163 deletions
diff --git a/usrp2/vrt/vita_tx_tb.v b/usrp2/vrt/vita_tx_tb.v
index 90986a35f..0223d6850 100644
--- a/usrp2/vrt/vita_tx_tb.v
+++ b/usrp2/vrt/vita_tx_tb.v
@@ -5,7 +5,7 @@ module vita_tx_tb;
localparam DECIM = 8'd4;
localparam INTERP = 8'd4;
- localparam MAXCHAN=4;
+ localparam MAXCHAN=1;
localparam NUMCHAN=1;
reg clk = 0;
@@ -19,9 +19,9 @@ module vita_tx_tb;
wire [(MAXCHAN*32)-1:0] sample, sample_tx;
wire strobe, run;
- wire [35:0] data_o;
- wire src_rdy;
- wire dst_rdy;
+ reg [35:0] data_o = 36'h0;
+ reg src_rdy = 0;
+ wire dst_rdy;
wire [63:0] vita_time;
@@ -32,42 +32,13 @@ module vita_tx_tb;
wire [7:0] set_addr_dsp;
wire [31:0] set_data_dsp;
- /*
- settings_bus_crossclock settings_bus_xclk_dsp
- (.clk_i(clk), .rst_i(reset), .set_stb_i(set_stb), .set_addr_i(set_addr), .set_data_i(set_data),
- .clk_o(clk), .rst_o(reset), .set_stb_o(set_stb_dsp), .set_addr_o(set_addr_dsp), .set_data_o(set_data_dsp));
- */
-
wire sample_dst_rdy, sample_src_rdy;
- //wire [99:0] sample_data_o;
wire [64+4+(MAXCHAN*32)-1:0] sample_data_o, sample_data_tx;
time_64bit #(.TICKS_PER_SEC(100000000), .BASE(0)) time_64bit
(.clk(clk), .rst(reset),
.set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
.pps(0), .vita_time(vita_time));
-
- rx_dsp_model rx_dsp_model
- (.clk(clk), .reset(reset), .run(run), .decim(DECIM), .strobe(strobe), .sample(sample[31:0]));
-
- generate
- if(MAXCHAN>1)
- assign sample[(MAXCHAN*32)-1:32] = 0;
- endgenerate
-
- vita_rx_control #(.BASE(0), .WIDTH(32*MAXCHAN)) vita_rx_control
- (.clk(clk), .reset(reset), .clear(0),
- .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
- .vita_time(vita_time), .overrun(overrun),
- .sample_fifo_o(sample_data_o), .sample_fifo_dst_rdy_i(sample_dst_rdy), .sample_fifo_src_rdy_o(sample_src_rdy),
- .sample(sample), .run(run), .strobe(strobe));
-
- vita_rx_framer #(.BASE(0), .MAXCHAN(MAXCHAN)) vita_rx_framer
- (.clk(clk), .reset(reset), .clear(0),
- .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
- .data_o(data_o), .dst_rdy_i(dst_rdy), .src_rdy_o(src_rdy),
- .sample_fifo_i(sample_data_o), .sample_fifo_dst_rdy_o(sample_dst_rdy), .sample_fifo_src_rdy_i(sample_src_rdy),
- .fifo_occupied(), .fifo_full(), .fifo_empty() );
wire [35:0] data_tx;
wire src_rdy_tx, dst_rdy_tx;
@@ -89,7 +60,7 @@ module vita_tx_tb;
vita_tx_control #(.BASE(16), .WIDTH(MAXCHAN*32)) vita_tx_control
(.clk(clk), .reset(reset), .clear(0),
.set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
- .vita_time(vita_time-100), .underrun(underrun),
+ .vita_time(vita_time), .underrun(underrun),
.sample_fifo_i(sample_data_tx),
.sample_fifo_dst_rdy_o(sample_dst_rdy_tx), .sample_fifo_src_rdy_i(sample_src_rdy_tx),
.sample(sample_tx), .run(run_tx), .strobe(strobe_tx));
@@ -97,28 +68,20 @@ module vita_tx_tb;
tx_dsp_model tx_dsp_model
(.clk(clk), .reset(reset), .run(run_tx), .interp(INTERP), .strobe(strobe_tx), .sample(sample_tx[31:0] ));
- always @(posedge clk)
- if(src_rdy & dst_rdy)
- begin
- if(data_o[32] & ~data_o[33])
- begin
- $display("RX-PKT-START %d",$time);
- $display(" RX-PKT-DAT %x",data_o[31:0]);
- end
- else if(data_o[32] & data_o[33])
- begin
- $display(" RX-PKT-DAT %x -- With ERR",data_o[31:0]);
- $display("RX-PKT-ERR %d",$time);
- end
- else if(~data_o[32] & data_o[33])
- begin
- $display(" RX-PKT-DAT %x",data_o[31:0]);
- $display("RX-PKT-END %d",$time);
- end
- else
- $display(" RX-PKT DAT %x",data_o[31:0]);
- end
-
+ task write_setting;
+ input [7:0] addr;
+ input [31:0] data;
+ begin
+ set_stb <= 0;
+ @(posedge clk);
+ set_addr <= addr;
+ set_data <= data;
+ set_stb <= 1;
+ @(posedge clk);
+ set_stb <= 0;
+ end
+ endtask // write_setting
+
initial
begin
@(negedge reset);
@@ -129,124 +92,61 @@ module vita_tx_tb;
write_setting(7,8); // Samples per VITA packet
write_setting(8,NUMCHAN); // Samples per VITA packet
#10000;
+ queue_vita_packets(32'h300, 106, 32'hF00D_1234, 32'h55AA_AA55);
+ //queue_vita_packets(32'h300, 6, 32'hF00D_1234, 32'h0);
+ queue_vita_packets(32'h600, 9, 32'h9876_ABCD, 32'h0);
- queue_rx_cmd(1,0,8,32'h0,32'h0); // send imm, single packet
-/*
- queue_rx_cmd(1,0,16,32'h0,32'h0); // send imm, 2 packets worth
- queue_rx_cmd(1,0,7,32'h0,32'h0); // send imm, 1 short packet worth
- queue_rx_cmd(1,0,9,32'h0,32'h0); // send imm, just longer than 1 packet
-
- queue_rx_cmd(1,1,16,32'h0,32'h0); // chained
- queue_rx_cmd(0,0,8,32'h0,32'h0); // 2nd in chain
-
- queue_rx_cmd(1,1,17,32'h0,32'h0); // chained, odd length
- queue_rx_cmd(0,0,9,32'h0,32'h0); // 2nd in chain, also odd length
-
- queue_rx_cmd(0,0,8,32'h0,32'h340); // send at, on time
- queue_rx_cmd(0,0,8,32'h0,32'h100); // send at, but late
-
- queue_rx_cmd(1,1,8,32'h0,32'h0); // chained, but break chain
- #100000;
- $display("\nEnd chain with zero samples, shouldn't error\n");
- queue_rx_cmd(1,1,8,32'h0,32'h0); // chained
- queue_rx_cmd(0,0,0,32'h0,32'h0); // end chain with zero samples, should keep us out of error
- #100000;
-
- $display("\nEnd chain with zero samples on odd-length, shouldn't error\n");
- queue_rx_cmd(1,1,14,32'h0,32'h0); // chained
- queue_rx_cmd(0,0,0,32'h0,32'h0); // end chain with zero samples, should keep us out of error
- #100000;
- $display("Should have gotten 14 samples and EOF by now\n");
-
- queue_rx_cmd(1,1,9,32'h0,32'h0); // chained, but break chain, odd length
- #100000;
- //dst_rdy <= 0; // stop pulling out of fifo so we can get an overrun
- queue_rx_cmd(1,0,100,32'h0,32'h0); // long enough to fill the fifos
- queue_rx_cmd(1,0,5,32'h0,32'h0); // this command waits until the previous error packet is sent
- #100000;
- //dst_rdy <= 1; // restart the reads so we can see what we got
- #100000;
- //dst_rdy <= 0; // stop pulling out of fifo so we can get an overrun
- queue_rx_cmd(1,1,100,32'h0,32'h0); // long enough to fill the fifos
- //queue_rx_cmd(1,0,5,32'h0,32'h0); // this command waits until the previous error packet is sent
- #100000;
- @(posedge clk);
- //dst_rdy <= 1;
- */
- #100000 $finish;
+ #300000 $finish;
end
- task write_setting;
- input [7:0] addr;
- input [31:0] data;
+ task queue_vita_packets;
+ input [31:0] sendtime;
+ input [15:0] samples;
+ input [15:0] word;
+ input [31:0] trailer;
+
+ reg [15:0] i;
+
begin
- set_stb <= 0;
@(posedge clk);
- set_addr <= addr;
- set_data <= data;
- set_stb <= 1;
+ src_rdy <= 1;
+ data_o <= {4'b0001,4'h1,1'b0,|trailer,2'h3,8'hF0,(16'd5+samples+|trailer)}; // header
@(posedge clk);
- set_stb <= 0;
- end
- endtask // write_setting
-
- task queue_rx_cmd;
- input send_imm;
- input chain;
- input [29:0] lines;
- input [31:0] secs;
- input [31:0] tics;
- begin
- write_setting(0,{send_imm,chain,lines});
- write_setting(1,secs);
- write_setting(2,tics);
+ data_o <= {4'b0000,32'h0}; // streamid
+ @(posedge clk);
+ data_o <= {4'b0000,32'h0}; // SECS
+ @(posedge clk);
+ data_o <= {4'b0000,32'h0}; // TICS
+ @(posedge clk);
+ data_o <= {4'b0000,sendtime}; // TICS
+ @(posedge clk);
+
+ for(i=0;i<samples-1;i=i+1)
+ begin
+ data_o <= {4'b0000,i,word}; // Payload
+ @(posedge clk);
+ end
+ if(trailer==0)
+ begin
+ data_o <= {4'b0010,i,16'hBEEF}; // Last Payload
+ @(posedge clk);
+ end
+ else
+ begin
+ data_o <= {4'b0000,i,16'hBEEF}; // Last Payload
+ @(posedge clk);
+ data_o <= {4'b0010,trailer}; // Last Payload
+ @(posedge clk);
+ end
+ src_rdy <= 0;
+ @(posedge clk);
+
end
- endtask // queue_rx_cmd
+ endtask // queue_vita_packets
endmodule // vita_tx_tb
-module rx_dsp_model
- (input clk, input reset,
- input run,
- input [7:0] decim,
- output strobe,
- output [31:0] sample);
-
- reg [15:0] pktnum = 0;
- reg [15:0] counter = 0;
-
- reg run_d1;
- always @(posedge clk) run_d1 <= run;
-
- always @(posedge clk)
- if(run & ~run_d1)
- begin
- counter <= 0;
- pktnum <= pktnum + 1;
- end
- else if(run & strobe)
- counter <= counter + 1;
-
- assign sample = {pktnum,counter};
-
- reg [7:0] stb_ctr = 0;
-
- always @(posedge clk)
- if(reset)
- stb_ctr <= 0;
- else if(run & ~run_d1)
- stb_ctr <= 1;
- else if(run)
- if(stb_ctr == decim-1)
- stb_ctr <= 0;
- else
- stb_ctr <= stb_ctr + 1;
-
- assign strobe = stb_ctr == decim-1;
-
-endmodule // rx_dsp_model
-
module tx_dsp_model
(input clk, input reset,
input run,