diff options
| -rw-r--r-- | host/docs/dboards.rst | 18 |
1 files changed, 15 insertions, 3 deletions
diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst index f3d7d95b0..080117651 100644 --- a/host/docs/dboards.rst +++ b/host/docs/dboards.rst @@ -49,10 +49,12 @@ Receive Antennas: **J3** The board has no user selectable antenna setting -Recieve Gains: +Receive Gains: **GC1**, Range: 0-56dB **GC2**, Range: 0-24dB +Low-Pass Filter Bandwidth (Hz): 4M-33M + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ RFX Series ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -64,7 +66,7 @@ The user may set the receive antenna to be TX/RX or RX2. However, when using an RFX board in full-duplex mode, the receive antenna will always be set to RX2, regardless of the settings. -Recieve Gains: **PGA0**, Range: 0-70dB (except RFX400 range is 0-45dB) +Receive Gains: **PGA0**, Range: 0-70dB (except RFX400 range is 0-45dB) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ XCVR 2450 @@ -91,6 +93,10 @@ Receive Gains: * **LNA**, Range: 0-30.5dB * **VGA**, Range: 0-62dB +Low-Pass Filter Bandwidths (Hz): + * **RX**: 7.5M, 9.5M, 14M, 18M; (each +-0, 5, or 10%) + * **TX**: 12M, 18M, 24M + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ WBX Series ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -104,7 +110,11 @@ the receive antenna will always be set to RX2, regardless of the settings. Transmit Gains: **PGA0**, Range: 0-25dB -Recieve Gains: **PGA0**, Range: 0-31.5dB +Receive Gains: **PGA0**, Range: 0-31.5dB + +Low-Pass Filter Bandwidths (Hz): + * **RX**: 20M (Fixed) + * **TX**: 20M (Fixed) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ TVRX @@ -115,6 +125,8 @@ Receive Gains: * **RF**, Range: -13.3-50.3dB (frequency-dependent) * **IF**, Range: -1.5-32.5dB +Bandpass Filter Bandwidth: 6MHz + ------------------------------------------------------------------------ Daughterboard Modifications ------------------------------------------------------------------------ |