diff options
63 files changed, 180 insertions, 8748 deletions
diff --git a/firmware/microblaze/apps/.gitignore b/firmware/microblaze/apps/.gitignore deleted file mode 100644 index 968b04cd7..000000000 --- a/firmware/microblaze/apps/.gitignore +++ /dev/null @@ -1,8 +0,0 @@ -/*.elf -/*.bin -/*.dump -/*.log -/*.rom -/*.map -/Makefile -/Makefile.in diff --git a/firmware/microblaze/apps/Makefile.am b/firmware/microblaze/apps/Makefile.am deleted file mode 100644 index a4f79935b..000000000 --- a/firmware/microblaze/apps/Makefile.am +++ /dev/null @@ -1,82 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007,2008 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/Makefile.common - -LDADD = $(top_srcdir)/lib/libu2fw.a - -AM_CFLAGS += -I$(top_srcdir)/../../host/lib/usrp - -noinst_PROGRAMS = txrx_uhd.elf - -# blink_leds \ -# blink_leds2 \ -# buf_ram_test \ -# burn_dbsrx_eeprom \ -# can_i_sub \ -# echo \ -# hello \ -# read_dbids \ -# set_hw_rev \ -# test1 \ -# test_db_spi \ -# test_i2c \ -# test_sd \ -# test_ram \ -# test_phy_comm \ -# test_lsadc \ -# test_lsdac \ -# timer_test \ -# txrx \ -# burnrev30 \ -# burnrev31 \ -# burnrev40 \ -# sd_gentest \ -# sd_bounce -# - -#nononono = \ -# eth_serdes \ -# gen_eth_packets \ -# rcv_eth_packets \ -# tx_standalone \ -# factory_test \ -# serdes_txrx \ -# mimo_tx \ -# mimo_tx_slave \ -# ibs_rx_test \ -# ibs_tx_test - -# tx_drop_SOURCES = tx_drop.c app_common.c -# tx_drop_rate_limited_SOURCES = tx_drop_rate_limited.c app_common.c -# tx_drop2_SOURCES = tx_drop2.c app_common.c -txrx_uhd_elf_SOURCES = txrx_uhd.c -# app_common_v2.c -#factory_test_SOURCES = factory_test.c app_common_v2.c -#eth_serdes_SOURCES = eth_serdes.c app_passthru_v2.c -#serdes_txrx_SOURCES = serdes_txrx.c app_common_v2.c -#mimo_tx_SOURCES = mimo_tx.c mimo_app_common_v2.c -#mimo_tx_slave_SOURCES = mimo_tx_slave.c app_common_v2.c - -#noinst_HEADERS = \ -# app_common_v2.h \ -# app_passthru_v2.h \ -# mimo_app_common_v2.h -# - diff --git a/firmware/microblaze/apps/app_passthru_v2.c b/firmware/microblaze/apps/app_passthru_v2.c deleted file mode 100644 index 406c56b3b..000000000 --- a/firmware/microblaze/apps/app_passthru_v2.c +++ /dev/null @@ -1,251 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "app_passthru_v2.h" -#include "buffer_pool.h" -#include "memcpy_wa.h" -#include "ethernet.h" -#include "nonstdio.h" -#include "print_rmon_regs.h" -#include "db.h" -#include "clocks.h" -#include <string.h> - -volatile bool link_is_up = false; // eth handler sets this - - -// If this is non-zero, this dbsm could be writing to the ethernet -dbsm_t *ac_could_be_sending_to_eth; - -//static unsigned char exp_seqno = 0; - -void -set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) -{ - reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; - reply_pkt->ehdr.src = *ethernet_mac_addr(); - reply_pkt->ehdr.ethertype = U2_ETHERTYPE; - reply_pkt->thdr.flags = 0; - reply_pkt->thdr.fifo_status = 0; // written by protocol engine - reply_pkt->thdr.seqno = 0; // written by protocol engine - reply_pkt->thdr.ack = 0; // written by protocol engine - u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); - reply_pkt->fixed.timestamp = timer_regs->time; -} - -static void -send_reply(unsigned char *reply, size_t reply_len) -{ - if (reply_len < 64) - reply_len = 64; - - // wait for buffer to become idle - hal_set_leds(0x4, 0x4); - while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) - ; - hal_set_leds(0x0, 0x4); - - // copy reply into CPU_TX_BUF - memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); - - // wait until nobody else is sending to the ethernet - if (ac_could_be_sending_to_eth){ - hal_set_leds(0x8, 0x8); - dbsm_wait_for_opening(ac_could_be_sending_to_eth); - hal_set_leds(0x0, 0x8); - } - - // fire it off - bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, reply_len/4); - - // wait for it to complete (not long, it's a small pkt) - while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) - ; - - bp_clear_buf(CPU_TX_BUF); -} - - -static size_t -op_id_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_id_reply_t *r = (op_id_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) // no room - return 0; - - // Build reply subpacket - - r->opcode = OP_ID_REPLY; - r->len = sizeof(op_id_reply_t); - r->rid = p->rid; - r->addr = *ethernet_mac_addr(); - r->hw_rev = 0x0000; // FIXME - // r->fpga_md5sum = ; // FIXME - // r->sw_md5sum = ; // FIXME - - // FIXME Add d'board info, including dbid, min/max gain, min/max freq - - return r->len; -} - -static size_t -add_eop(void *reply_payload, size_t reply_payload_space) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_EOP; - r->len = sizeof(*r); - r->rid = 0; - r->ok = 0; - - return r->len; -} - -bool -handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) -{ - unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; - unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; - int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); - - bool handled_it = false; - - // initialize reply - memset(reply, 0, sizeof(reply)); - set_reply_hdr((u2_eth_packet_t *) reply, pkt); - - // point to beginning of payload (subpackets) - unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); - int payload_len = len - sizeof(u2_eth_packet_t); - - size_t subpktlen = 0; - - while (payload_len >= sizeof(op_generic_t)){ - const op_generic_t *gp = (const op_generic_t *) payload; - subpktlen = 0; - - switch(gp->opcode){ - case OP_EOP: // end of subpackets - goto end_of_subpackets; - - case OP_ID: - subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); - handled_it = true; - break; - - default: - if (0){ - printf("\npassing on %d\n", gp->opcode); - } - break; - } - - int t = (gp->len + 3) & ~3; // bump to a multiple of 4 - payload += t; - payload_len -= t; - - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - } - - end_of_subpackets: - - if (handled_it){ - // add the EOP marker - subpktlen = add_eop(reply_payload, reply_payload_space); - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - - send_reply(reply, reply_payload - reply); - } - - return handled_it; -} - - -/* - * Called when an ethernet packet is received. - * Return true if we handled it here, otherwise - * it'll be passed on to the DSP Tx pipe - */ -bool -eth_pkt_inspector(dbsm_t *sm, int bufno) -{ - u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); - size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; - - //static size_t last_len = 0; - - // hal_toggle_leds(0x1); - - // inspect rcvd frame and figure out what do do. - - if (pkt->ehdr.ethertype != U2_ETHERTYPE) - return true; // ignore, probably bogus PAUSE frame from MAC - - int chan = u2p_chan(&pkt->fixed); - - switch (chan){ - case CONTROL_CHAN: - return handle_control_chan_frame(pkt, byte_len); - break; - - case 0: - default: -#if 0 - if (last_len != 0){ - if (byte_len != last_len){ - printf("Len: %d last: %d\n", byte_len, last_len); - } - } - last_len = byte_len; - - if((pkt->thdr.seqno) == exp_seqno){ - exp_seqno++; - //putchar('.'); - } - else { - // putchar('S'); - //printf("S%d %d ",exp_seqno,pkt->thdr.seqno); - exp_seqno = pkt->thdr.seqno + 1; - } -#endif - return false; // pass it on to Tx DSP - break; - } -} - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - link_is_up = speed != 0; - hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); - printf("\neth link changed: speed = %d\n", speed); -} diff --git a/firmware/microblaze/apps/app_passthru_v2.h b/firmware/microblaze/apps/app_passthru_v2.h deleted file mode 100644 index 3904c670f..000000000 --- a/firmware/microblaze/apps/app_passthru_v2.h +++ /dev/null @@ -1,54 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_APP_COMMON_H -#define INCLUDED_APP_COMMON_H - -#include <stdbool.h> -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "memory_map.h" -#include "hal_io.h" -#include <stddef.h> -#include <db.h> - -#define CPU_TX_BUF 7 // cpu -> eth - -#define _AL4 __attribute__((aligned (4))) - -extern volatile bool link_is_up; // eth handler sets this - - -// If there's a dbsm that sends to the ethernet, put it's address here -extern dbsm_t *ac_could_be_sending_to_eth; - - -void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); - -/* - * Called when an ethernet packet is received. - * Return true if we handled it here, otherwise - * it'll be passed on to the DSP Tx pipe - */ -bool eth_pkt_inspector(dbsm_t *sm, int bufno); - -void link_changed_callback(int speed); - -bool handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); - -#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/blink_leds.c b/firmware/microblaze/apps/blink_leds.c deleted file mode 100644 index 682ca8db2..000000000 --- a/firmware/microblaze/apps/blink_leds.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "nonstdio.h" - -int -main(void) -{ - int counter = 0; - - u2_init(); - - putstr("blink_leds\n"); - while(1){ - output_regs->leds = (counter++ & 0x3); - } - - return 0; -} diff --git a/firmware/microblaze/apps/blink_leds2.c b/firmware/microblaze/apps/blink_leds2.c deleted file mode 100644 index 13e78afb3..000000000 --- a/firmware/microblaze/apps/blink_leds2.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "pic.h" -#include "nonstdio.h" - -//#define DELTA_T (MASTER_CLK_RATE/2) // 0.5s (10ns per tick) -#define DELTA_T 5000 // 5 us (10ns per tick) - - -void -timer_handler(unsigned irq) -{ - hal_set_timeout(DELTA_T); // schedule next timeout - hal_toggle_leds(0x2); -} - -int -main(void) -{ - u2_init(); - - putstr("blink_leds2\n"); - pic_register_handler(IRQ_ONETIME, timer_handler); - hal_set_timeout(DELTA_T); // schedule next timeout - - while(1){ - hal_toggle_leds(0x1); - } - - return 0; -} diff --git a/firmware/microblaze/apps/buf_ram_test.c b/firmware/microblaze/apps/buf_ram_test.c deleted file mode 100644 index 1aca2aec5..000000000 --- a/firmware/microblaze/apps/buf_ram_test.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "u2_init.h" -#include "memory_map.h" -#include <stdbool.h> -#include "nonstdio.h" -#include "hal_io.h" -#include "mdelay.h" - - -static void -write_bufs(void) -{ - int i, n; - int counter = 0; - - for (n = 0; n < NBUFFERS; n++){ - volatile int *p = buffer_ram(n); - for (i = 0; i < BP_NLINES; i++) - p[i] = counter++; - } -} - -// return number of errors detected -static int -check_bufs(void) -{ - int i, n; - int counter = 0; - int nerrors = 0; - - for (n = 0; n < NBUFFERS; n++){ - volatile int *p = buffer_ram(n); - for (i = 0; i < BP_NLINES; i++, counter++){ - int rd = p[i]; - if (rd != counter){ - putchar('b'); - putchar(n + '0'); - putchar('['); - puthex16(i); - putstr("] exp: "); - puthex32(counter); - putstr(" got: "); - puthex32_nl(rd); - nerrors++; - } - } - } - return nerrors; -} - - -int -main(void) -{ - u2_init(); - - output_regs->leds = 0; - - write_bufs(); - int nerrors = check_bufs(); - - if (nerrors == 0){ - output_regs->leds = 0x3; // leds on -> PASS - putstr("PASS\n"); - } - else { - output_regs->leds = 0x0; // leds off -> FAIL - putstr("FAIL\n"); - } - - hal_finish(); - return 0; -} diff --git a/firmware/microblaze/apps/burn_dbsrx_eeprom.c b/firmware/microblaze/apps/burn_dbsrx_eeprom.c deleted file mode 100644 index 116d4d8d0..000000000 --- a/firmware/microblaze/apps/burn_dbsrx_eeprom.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "i2c.h" -#include "usrp2_i2c_addr.h" -#include "mdelay.h" -#include "hal_io.h" -#include "nonstdio.h" -#include <stdbool.h> - - - -int read_dboard_eeprom(int i2c_addr); - - -#define USRP_DBID_DBS_RX 0x0002 -#define USRP_DBID_DBS_RX_WITH_CLOCK_MOD 0x000d - -const char dbs_rx_rev2_eeprom[] = { - 0xdb, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 -}; - -#define LED_VALS (LED_A | LED_B | LED_C | LED_D) -#define LED_MASK (LED_A | LED_B | LED_C | LED_D) - -int -main(void) -{ - u2_init(); - - puts("\nburn_dbsrx_eeprom\n"); - - hal_set_leds(0, ~0); // all off - - int i2c_addr = I2C_ADDR_RX_A; - int dbid = read_dboard_eeprom(i2c_addr); - bool ok; - const char *msg = 0; - - switch (dbid){ - case -1: - msg = "No RX daughterboard found"; - goto bad; - - case -2: - msg = "Invalid RX EEPROM contents"; - goto bad; - - case USRP_DBID_DBS_RX_WITH_CLOCK_MOD: - msg = "RX Daughterboard already reports being a DBS RX w/ CLOCK_MOD"; - goto good; - - case USRP_DBID_DBS_RX: - // Says it's a DBS_RX, attempt to burn the EEPROM - ok = eeprom_write(i2c_addr, 0, - dbs_rx_rev2_eeprom, sizeof(dbs_rx_rev2_eeprom)); - if (ok){ - msg = "Successfully programmed db as DBS RX Rev 2.1"; - goto good; - } - else { - msg = "Failed to write daugherboard eeprom"; - goto bad; - } - - default: - msg = "Daughterboard is not a DBS RX; ignored"; - goto bad; - } - - good: - puts(msg); - hal_set_leds(LED_VALS, LED_MASK); - while (1) - ; - - bad: - puts(msg); - while(1){ - hal_toggle_leds(LED_VALS); - mdelay(50); - } -} diff --git a/firmware/microblaze/apps/burnrev30.c b/firmware/microblaze/apps/burnrev30.c deleted file mode 100644 index 40fa53e34..000000000 --- a/firmware/microblaze/apps/burnrev30.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> -#include <i2c.h> -#include <usrp2_i2c_addr.h> -#include <clocks.h> -#include "sd.h" -#include "mdelay.h" - -#define HW_REV_MAJOR 3 -#define HW_REV_MINOR 0 - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int test_sd() -{ - int i = sd_init(); - if(i==0) { - puts("FAILED INIT of Card\n"); - return 0; - } - - unsigned char buf[512]; - i = sd_read_block(2048,buf); - if(i == 0) { - puts("READ Command Rejected\n"); - return 0; - } - if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) - ; - else { - puts("Read bad data from SD Card\n"); - return 0; - } - return 1; -} - -int -main(void) -{ - u2_init(); - - putstr("\nFactory Test, Board Rev 3.0\n"); - - bool ok = true; - unsigned char maj = HW_REV_MAJOR; - unsigned char min = HW_REV_MINOR; - ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); - ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); - - putstr("\nset_hw_rev\n"); - if (ok) - printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - else { - printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - hal_finish(); - return 0; - } - - if(test_sd()) - puts("SD OK\n"); - else { - puts("SD FAIL\n"); - //hal_finish(); - //return 0; - } - if(test_ram()) - puts("RAM OK\n"); - else { - puts("RAM FAIL\n"); - hal_finish(); - return 0; - } - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - clocks_mimo_config(MC_WE_LOCK_TO_SMA); - - while (!clocks_lock_detect()) { - puts("No Lock"); - mdelay(1000); - } - puts("Clock Locked\n"); - -} diff --git a/firmware/microblaze/apps/burnrev31.c b/firmware/microblaze/apps/burnrev31.c deleted file mode 100644 index f6b08d187..000000000 --- a/firmware/microblaze/apps/burnrev31.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> -#include <i2c.h> -#include <usrp2_i2c_addr.h> -#include <clocks.h> -#include "sd.h" -#include "mdelay.h" - -#define HW_REV_MAJOR 3 -#define HW_REV_MINOR 1 - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int test_sd() -{ - int i = sd_init(); - if(i==0) { - puts("FAILED INIT of Card\n"); - return 0; - } - - unsigned char buf[512]; - i = sd_read_block(2048,buf); - if(i == 0) { - puts("READ Command Rejected\n"); - return 0; - } - if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) - ; - else { - puts("Read bad data from SD Card\n"); - return 0; - } - return 1; -} - -int -main(void) -{ - u2_init(); - - putstr("\nFactory Test, Board Rev 3.1\n"); - - bool ok = true; - unsigned char maj = HW_REV_MAJOR; - unsigned char min = HW_REV_MINOR; - ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); - ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); - - putstr("\nset_hw_rev\n"); - if (ok) - printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - else { - printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - hal_finish(); - return 0; - } - - if(test_sd()) - puts("SD OK\n"); - else { - puts("SD FAIL\n"); - //hal_finish(); - //return 0; - } - if(test_ram()) - puts("RAM OK\n"); - else { - puts("RAM FAIL\n"); - hal_finish(); - return 0; - } - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - clocks_mimo_config(MC_WE_LOCK_TO_SMA); - - while (!clocks_lock_detect()) { - puts("No Lock"); - mdelay(1000); - } - puts("Clock Locked\n"); - -} diff --git a/firmware/microblaze/apps/can_i_sub.c b/firmware/microblaze/apps/can_i_sub.c deleted file mode 100644 index ed49791f0..000000000 --- a/firmware/microblaze/apps/can_i_sub.c +++ /dev/null @@ -1,25 +0,0 @@ -#include <u2_init.h> -#include <nonstdio.h> - -//typedef long long int64_t; - - -int64_t sub(int64_t a, int64_t b); -void print(int64_t d); - -int main(void) -{ - u2_init(); - - int64_t d = sub(462550990848000LL, 462028800000000LL); - print_uint64(d); - newline(); - return 0; -} - -int64_t sub(int64_t a, int64_t b) -{ - return a - b; -} - - diff --git a/firmware/microblaze/apps/double_buffer_fragment.c b/firmware/microblaze/apps/double_buffer_fragment.c deleted file mode 100644 index cfc061247..000000000 --- a/firmware/microblaze/apps/double_buffer_fragment.c +++ /dev/null @@ -1,138 +0,0 @@ -#if 0 -void -double_buffering(int port) { - unsigned int localstatus = buffer_pool_status->status; - - if(localstatus & BPS_DONE_0) { - bp_clear_buf(0); - if(buffer_state[0] == FILLING) { - buffer_state[0] = FULL; - if(buffer_state[1] == EMPTY) { - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[0] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines - buffer_state[0] = FILLING; - } - if(buffer_state[1] == FULL) { - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 0\n"); - } - - if(localstatus & BPS_DONE_1) { - bp_clear_buf(1); - if(buffer_state[1] == FILLING) { - buffer_state[1] = FULL; - if(buffer_state[0] == EMPTY) { - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[0] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[1] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - if(buffer_state[0] == FULL) { - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 1\n"); - } - - if(localstatus & BPS_DONE_2) { - bp_clear_buf(2); - if(buffer_state[2] == FILLING) { - buffer_state[2] = FULL; - if(buffer_state[3] == EMPTY) { - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines - buffer_state[3] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[2] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 - buffer_state[2] = FILLING; - } - if(buffer_state[3] == FULL) { - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 2\n"); - } - - if(localstatus & BPS_DONE_3) { - bp_clear_buf(3); - if(buffer_state[3] == FILLING) { - buffer_state[3] = FULL; - if(buffer_state[2] == EMPTY) { - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines - buffer_state[2] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[3] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 - buffer_state[3] = FILLING; - } - if(buffer_state[2] == FULL) { - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 3\n"); - } -} -#endif diff --git a/firmware/microblaze/apps/echo.c b/firmware/microblaze/apps/echo.c deleted file mode 100644 index 89108ee80..000000000 --- a/firmware/microblaze/apps/echo.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "u2_init.h" -#include "stdio.h" - -int -main(void) -{ - u2_init(); - - puts("\n>>> echo <<<"); - - while (1){ - int ch = getchar(); - putchar(ch); - } - - return 0; -} diff --git a/firmware/microblaze/apps/eth_serdes.c b/firmware/microblaze/apps/eth_serdes.c deleted file mode 100644 index 2d2ddc1ca..000000000 --- a/firmware/microblaze/apps/eth_serdes.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_passthru_v2.h" -#include "memcpy_wa.h" -#include "clocks.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> - - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno __attribute__((unused)); // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between ethernet and serdes - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // serdes -> eth (double buffer) -#define DSP_RX_BUF_1 3 // serdes -> eth -#define DSP_TX_BUF_0 4 // eth -> serdes (double buffer) -#define DSP_TX_BUF_1 5 // eth -> serdes - -/* - * ================================================================ - * configure serdes double buffering state machine (eth -> serdes) - * ================================================================ - */ - - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to serdes -buf_cmd_args_t dsp_tx_send_args = { - PORT_SERDES, - 0, - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ==================================================================== - * configure serdes RX double buffering state machine (serdes -> eth) - * ==================================================================== - */ - -// receive from serdes -buf_cmd_args_t dsp_rx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to ETH -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// ---------------------------------------------------------------- - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ - -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ -#if 0 - uint32_t *p = buffer_ram(buf_this); - uint32_t last_line = buffer_pool_status->last_line[buf_this] - sm->last_line_adj; - printf("fw_sets_seqno_inspector: buf_this = %d, last_line = %d\n", - buf_this, last_line); - - print_buffer(p, (last_line + 1)); -#endif - -#if 0 - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; -#endif - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - if (0 && (status & ~BPS_IDLE_ALL)){ - putstr("status = "); - puthex32_nl(status); - } - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int -main(void) -{ - u2_init(); - - output_regs->led_src = 0x3; // h/w controls bottom two bits - clocks_enable_test_clk(true, 1); - - putstr("\neth <-> serdes\n"); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - // clocks_mimo_config(MC_WE_LOCK_TO_SMA | MC_PROVIDE_CLK_TO_MIMO); - clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -#if 1 - output_regs->debug_mux_ctrl = 1; - hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> serdes - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - // initialize double buffering state machine for serdes -> ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // kick off the state machines - dbsm_start(&dsp_tx_sm); - dbsm_start(&dsp_rx_sm); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - } -} diff --git a/firmware/microblaze/apps/factory_test.c b/firmware/microblaze/apps/factory_test.c deleted file mode 100644 index e1fbb0e40..000000000 --- a/firmware/microblaze/apps/factory_test.c +++ /dev/null @@ -1,438 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> -#include <i2c.h> -#include <usrp2_i2c_addr.h> -#include <clocks.h> -#include "sd.h" - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between ethernet and DSP pipelines - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - -/* - * ================================================================ - * configure DSP TX double buffering state machine (eth -> dsp) - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ================================================================ - * configure DSP RX double buffering state machine (dsp -> eth) - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to ETH -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -} - - -void -stop_rx_cmd(void) -{ - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 256; - int interp = 32; - - // setup some defaults - - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = interp; -} - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int test_sd() -{ - int i = sd_init(); - if(i==0) { - puts("FAILED INIT of Card\n"); - return 0; - } - - unsigned char buf[512]; - i = sd_read_block(2048,buf); - if(i == 0) { - puts("READ Command Rejected\n"); - return 0; - } - if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) - ; - else { - puts("Read bad data from SD Card\n"); - return 0; - } - return 1; -} - -int -main(void) -{ - u2_init(); - - putstr("\nFactory Test\n"); - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - if(test_sd()) - puts("SD OK\n"); - else { - puts("SD FAIL\n"); - // hal_finish(); - //return 0; - } - if(test_ram()) - puts("RAM OK\n"); - else { - puts("RAM FAIL\n"); - hal_finish(); - return 0; - } - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - output_regs->led_src = 0x7; // make bottom 3 controlled by HW - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - clocks_enable_tx_dboard(true,1); - clocks_mimo_config(MC_WE_LOCK_TO_SMA); -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - - output_regs->debug_mux_ctrl = 1; -#if 0 - hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // program tx registers - setup_tx(); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/gen_eth_packets.c b/firmware/microblaze/apps/gen_eth_packets.c deleted file mode 100644 index 4d521f6bf..000000000 --- a/firmware/microblaze/apps/gen_eth_packets.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "memcpy_wa.h" -#include "print_rmon_regs.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> - - -// ---------------------------------------------------------------- - -static eth_mac_addr_t dst_mac_addr = - {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; - -// ---------------------------------------------------------------- - -// #define PACKET_SIZE 1500 // bytes -// #define ETH_DATA_RATE 1000000 // 1MB/s -// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s - -// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts - -static int timer_delta = (int)(MASTER_CLK_RATE * 1e-3); // tick at 1 kHz -static int sim_timer_delta = (int)(MASTER_CLK_RATE * 100e-6); // tick at 10 kHz - -static volatile bool send_packet_now = false; // timer handler sets this -static volatile bool link_is_up = false; // eth handler sets this - -int packet_number = 0; - - -#define CPU_TX_BUF 0 // cpu xmits ethernet frames from here -#define CPU_RX_BUF 1 // receive ethernet frames here - -// ---------------------------------------------------------------- - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - link_is_up = speed == 0 ? false : true; - hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); - printf("\neth link changed: speed = %d\n", speed); -} - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = 1; -} - - -static void -init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) -{ - int i = 0; - int mark = ((bufnum & 0xff) << 24) | 0x005A0000; - - for (i = 0; i < BP_NLINES; i++){ - buf[i] = mark | i; - mark ^= 0x00FF0000; - } - - // copy header into buffer - memcpy_wa(buf, pkt, sizeof(*pkt)); -} - -static void -init_packets(void) -{ - u2_eth_packet_t pkt __attribute__((aligned (4))); - - memset(&pkt, 0, sizeof(pkt)); - - pkt.ehdr.dst = dst_mac_addr; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - pkt.fixed.word0 = 0x01234567; - pkt.fixed.timestamp = 0xffffffff; - - // init just the one we're using - init_packet((void *)buffer_ram(CPU_TX_BUF), &pkt, CPU_TX_BUF); -} - -int -main(void) -{ - int npackets_sent = 0; - - u2_init(); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\ngen_eth_packets\n"); - - hal_set_leds(0x0, 0x3); - - init_packets(); - - pic_register_handler(IRQ_TIMER, timer_irq_handler); - - if (hwconfig_simulation_p()) - timer_delta = sim_timer_delta; - - hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - /* - if (hwconfig_simulation_p()){ - eth_mac->speed = 4; // hardcode mac speed to 1000 - link_is_up = true; - } - */ - - // fire off a receive from the ethernet - bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); - - while(1){ - uint32_t status = buffer_pool_status->status; - - if (status & (BPS_DONE(CPU_RX_BUF) | BPS_ERROR(CPU_RX_BUF))){ - bp_clear_buf(CPU_RX_BUF); - // ignore incoming ethernet packets; they were looped back in sim - bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); - } - - if (status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))){ - if (status & BPS_ERROR(CPU_TX_BUF)){ - putchar('E'); - } - bp_clear_buf(CPU_TX_BUF); - npackets_sent++; - if ((npackets_sent & 0xF) == 0){ // print after every 16 packets - //print_rmon_regs(); - putchar('.'); - } - } - - if (link_is_up && send_packet_now && (status & BPS_IDLE(CPU_TX_BUF))){ - send_packet_now = false; - - // kick off the next packet - // FIXME set packet number in packet - - bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, 255); // 1KB total - hal_toggle_leds(0x1); - } - } - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/gen_pause_frames.c b/firmware/microblaze/apps/gen_pause_frames.c deleted file mode 100644 index 0f81dafff..000000000 --- a/firmware/microblaze/apps/gen_pause_frames.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "u2_eth_packet.h" -#include "memcpy_wa.h" -#include <stddef.h> -#include <stdlib.h> - - -// ---------------------------------------------------------------- - -unsigned char dst_mac_addr[6] = { - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff -}; - -// ---------------------------------------------------------------- - -// #define PACKET_SIZE 1500 // bytes -// #define ETH_DATA_RATE 1000000 // 1MB/s -// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s - -// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts - -static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz - -static volatile bool send_packet_now = false; // timer handler sets this -static volatile bool link_is_up = false; // eth handler sets this - -int packet_number = 0; - -// ---------------------------------------------------------------- - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - link_is_up = true; - break; - - case 100: - v = LS_100; - link_is_up = true; - break; - - case 1000: - v = LS_100; - link_is_up = true; - break; - - default: - v = 0; - link_is_up = false; - break; - } - - hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - putstr("\neth link changed: speed = "); - puthex16_nl(speed); -} - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = 1; -} - - -void -buffer_irq_handler(unsigned irq) -{ - // FIXME -} - -static void -init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) -{ - int i = 0; - int mark = ((bufnum & 0xff) << 24) | 0x005A0000; - - for (i = 0; i < BP_NLINES; i++){ - buf[i] = mark | i; - mark ^= 0x00FF0000; - } - - // copy header into buffer - memcpy_wa(buf, pkt, sizeof(*pkt)); -} - -static void -init_packets(void) -{ - int i; - - u2_eth_packet_t pkt __attribute__((aligned (4))); - - for (i = 0; i < 6; i++){ - pkt.ehdr.dst.addr[i] = dst_mac_addr[i]; - } - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - - // fill ALL buffers for debugging - for (i = 0; i < 8; i++) - init_packet((void *)buffer_ram(i), &pkt, i); -} - -static int led_counter = 0; - -int -main(void) -{ - int send_pause = 1; - - u2_init(); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\ngen_eth_packets\n"); - - // Control LEDs - output_regs->leds = 0x00; - - init_packets(); - - // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now - pic_register_handler(IRQ_TIMER, timer_irq_handler); - hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - - ethernet_init(); - - eth_mac->pause_frame_send_en = 1; - eth_mac->pause_quanta_set = 16384 / 512; - - // eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 - - while(1){ - if (link_is_up && send_packet_now){ - send_packet_now = false; - - - if (send_pause) - eth_mac->xon_cpu = 1; - else - eth_mac->xon_cpu = 0; - - send_pause ^= 1; - - // kick off the next packet - // FIXME set packet number in packet - -#if 0 - bp_send_from_buf(0, PORT_ETH, 1, 0, 255); // 1KB total - - while ((buffer_pool_status->status & (BPS_DONE_0|BPS_ERROR_0)) == 0) - ; - bp_clear_buf(0); -#endif - - output_regs->leds = ((++led_counter) & 0x1) | (link_is_up ? 0x2 : 0x0); - } - } - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/hello.c b/firmware/microblaze/apps/hello.c deleted file mode 100644 index bce843093..000000000 --- a/firmware/microblaze/apps/hello.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "u2_init.h" -#include "stdio.h" - -int -main(void) -{ - u2_init(); - - puts("Hello World"); - puts("Goodbye World"); - - return 0; -} diff --git a/firmware/microblaze/apps/ibs_rx_test.c b/firmware/microblaze/apps/ibs_rx_test.c deleted file mode 100644 index bdc04747e..000000000 --- a/firmware/microblaze/apps/ibs_rx_test.c +++ /dev/null @@ -1,82 +0,0 @@ -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "nonstdio.h" - -#define PORT 2 // ethernet = 2, serdes = 0 -int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; -int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; - -int buffer_state[4]; - -static void __attribute__((unused)) -wait_until_status_nonzero(void) -{ - while (buffer_pool_status->status == 0) - ; -} - -int -main(void) -{ - int i; - - u2_init(); - - output_regs->adc_ctrl = 0x0A; - - dsp_rx_regs->freq = 0; - dsp_rx_regs->scale_iq = (1 << 16) | 1; - dsp_rx_regs->decim_rate = 8; - - volatile unsigned int *buffer0 = buffer_ram(0); - volatile unsigned int *buffer1 = buffer_ram(1); - volatile unsigned int *buffer2 = buffer_ram(2); - - putstr("Starting RX\n"); - bp_clear_buf(0); - bp_receive_to_buf(0, 1, 1, 0, 99); - - dsp_rx_regs->rx_command = (50 << 9) | 100; // Numlines, lines per frame - dsp_rx_regs->rx_time = 0x2000; - - dsp_rx_regs->rx_command = (137 << 9) | 50; // Numlines, lines per frame - dsp_rx_regs->rx_time = 0x2200; - - while (buffer_pool_status->status == 0) - ; - bp_clear_buf(0); - bp_clear_buf(1); - bp_receive_to_buf(1, 1, 1, 0, 99); - while (buffer_pool_status->status == 0) - ; - bp_clear_buf(2); - bp_receive_to_buf(2, 1, 1, 0, 99); - while (buffer_pool_status->status == 0) - ; - - for(i=0;i<100;i++) { - puthex(i); - putstr(" "); - puthex_nl(buffer0[i]); - } - for(i=0;i<60;i++) { - puthex(i); - putstr(" "); - puthex_nl(buffer1[i]); - } - for(i=0;i<60;i++) { - puthex(i); - putstr(" "); - puthex_nl(buffer2[i]); - } - //while(timer_regs -> time < 0x6000) - // {} - - putstr("Done\n"); - hal_finish(); - - return 1; -} diff --git a/firmware/microblaze/apps/ibs_tx_test.c b/firmware/microblaze/apps/ibs_tx_test.c deleted file mode 100644 index ff9446d92..000000000 --- a/firmware/microblaze/apps/ibs_tx_test.c +++ /dev/null @@ -1,160 +0,0 @@ -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "nonstdio.h" - -// Globals -#define EMPTY 0 -#define FILLING 1 -#define FULL 2 -#define EMPTYING 3 - -#define PORT 2 // ethernet = 2, serdes = 0 -int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; -int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; - -int buffer_state[4]; - -static void -wait_until_status_nonzero(void) -{ - while (buffer_pool_status->status == 0) - ; -} - -int -main(void) -{ - int i; - - u2_init(); - - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (1 << 16) | 1; - dsp_tx_regs->interp_rate = 8; - - // Write data to be sent into the first buffer - volatile unsigned int *buffer0 = buffer_ram(0); - volatile unsigned int *buffer1 = buffer_ram(1); - - - putstr("Starting to fill in RAM\n"); - for(i=0;i<512;i++) - buffer0[i] = i; - putstr("Filled in RAM\n"); - - buffer0[0] = 7; // start and end of buffer, send immediately - buffer0[1] = 0x0000; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - while(timer_regs -> time < 0x6000) - {} - - buffer0[0] = 3; // start and end of buffer - buffer0[1] = 0x8000; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - while(timer_regs -> time < 0x8400) - {} - - buffer0[0] = 3; // start and end of buffer - buffer0[1] = 0x8800; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - while(timer_regs -> time < 0x9000) - {} - - buffer0[0] = 0x2; // not last - buffer0[1] = 0x9100; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - buffer0[0] = 0x1; // last - buffer0[1] = 0x0000; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - - - buffer0[0] = 0x3; // first and last - buffer0[1] = 0x8000; // Time in the past - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - - /* - buffer0[0] = 0x2; // not last - buffer0[1] = 0x9600; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - */ - - while(timer_regs -> time < 0xa000) - {} - - putstr("Done\n"); - - while(1) - {} - hal_finish(); - - // Send a bunch, let them pile up in FIFO - bp_send_from_buf(0, 2, 1, 21, 80); wait_until_status_nonzero(); - bp_clear_buf(0); - putstr("First add'l TX done\n"); - bp_send_from_buf(0, 2, 1, 81, 288); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 289, 292); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 293, 326); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 327, 399); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 400, 511); wait_until_status_nonzero(); - bp_clear_buf(0); - putstr("All add'l TX done\n"); - - bp_receive_to_buf(1, 2, 1, 21, 80); wait_until_status_nonzero(); - bp_clear_buf(1); - putstr("First add'l RX done\n"); - bp_receive_to_buf(1, 2, 1, 81, 288); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 289, 292); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 293, 326); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 327, 399); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 400, 511); wait_until_status_nonzero(); - bp_clear_buf(1); - putstr("All add'l RX done\n"); - - for(i=0;i<512;i++) - if(buffer0[i] != buffer1[i]) { - putstr("ERROR at location: "); - puthex_nl(i); - putstr("Value sent: "); - puthex_nl(buffer0[i]); - putstr("Value rcvd: "); - puthex_nl(buffer1[i]); - //break; - } - - putstr("Done Testing\n"); - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/mimo_app_common_v2.c b/firmware/microblaze/apps/mimo_app_common_v2.c deleted file mode 100644 index 5dbecb0d0..000000000 --- a/firmware/microblaze/apps/mimo_app_common_v2.c +++ /dev/null @@ -1,582 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "mimo_app_common_v2.h" -#include "buffer_pool.h" -#include "memcpy_wa.h" -#include "ethernet.h" -#include "nonstdio.h" -#include "print_rmon_regs.h" -#include "db.h" -#include "db_base.h" -#include "clocks.h" -#include "u2_init.h" -#include <string.h> - -volatile bool link_is_up = false; // eth handler sets this -int cpu_tx_buf_dest_port = PORT_ETH; - -// If this is non-zero, this dbsm could be writing to the ethernet -dbsm_t *ac_could_be_sending_to_eth; - -static unsigned char exp_seqno __attribute__((unused)) = 0; - -void abort(void); - -static bool -burn_mac_addr(const op_burn_mac_addr_t *p) -{ - return ethernet_set_mac_addr(&p->addr); -} - -static bool -sync_to_pps(const op_generic_t *p) -{ - timesync_regs->sync_on_next_pps = 1; - putstr("SYNC to PPS\n"); - return true; -} - -static bool -config_mimo_cmd(const op_config_mimo_t *p) -{ - clocks_mimo_config(p->flags); - return true; -} - -void -set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) -{ - reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; - reply_pkt->ehdr.src = *ethernet_mac_addr(); - reply_pkt->ehdr.ethertype = U2_ETHERTYPE; - reply_pkt->thdr.flags = 0; - reply_pkt->thdr.fifo_status = 0; // written by protocol engine - reply_pkt->thdr.seqno = 0; // written by protocol engine - reply_pkt->thdr.ack = 0; // written by protocol engine - u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); - reply_pkt->fixed.timestamp = timer_regs->time; -} - -static void -send_reply(unsigned char *reply, size_t reply_len) -{ - if (reply_len < 64) - reply_len = 64; - - // wait for buffer to become idle - hal_set_leds(0x4, 0x4); - while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) - ; - hal_set_leds(0x0, 0x4); - - // copy reply into CPU_TX_BUF - memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); - - // wait until nobody else is sending to the ethernet - if (ac_could_be_sending_to_eth){ - hal_set_leds(0x8, 0x8); - dbsm_wait_for_opening(ac_could_be_sending_to_eth); - hal_set_leds(0x0, 0x8); - } - - if (0){ - printf("sending_reply to port %d, len = %d\n", cpu_tx_buf_dest_port, (int)reply_len); - print_buffer(buffer_ram(CPU_TX_BUF), reply_len/4); - } - - // fire it off - bp_send_from_buf(CPU_TX_BUF, cpu_tx_buf_dest_port, 1, 0, reply_len/4); - - // wait for it to complete (not long, it's a small pkt) - while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) - ; - - bp_clear_buf(CPU_TX_BUF); -} - - -static size_t -op_id_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_id_reply_t *r = (op_id_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) // no room - return 0; - - // Build reply subpacket - - r->opcode = OP_ID_REPLY; - r->len = sizeof(op_id_reply_t); - r->rid = p->rid; - r->addr = *ethernet_mac_addr(); - r->hw_rev = (u2_hw_rev_major << 8) | u2_hw_rev_minor; - // r->fpga_md5sum = ; // FIXME - // r->sw_md5sum = ; // FIXME - - return r->len; -} - - -static size_t -config_tx_v2_cmd(const op_config_tx_v2_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_config_tx_reply_v2_t *r = (op_config_tx_reply_v2_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - struct tune_result tune_result; - memset(&tune_result, 0, sizeof(tune_result)); - - bool ok = true; - -#if 0 - if (p->valid & CFGV_GAIN){ - ok &= db_set_gain(tx_dboard, p->gain); - } - - if (p->valid & CFGV_FREQ){ - bool was_streaming = is_streaming(); - if (was_streaming) - stop_rx_cmd(); - - u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); - bool tune_ok = db_tune(tx_dboard, f, &tune_result); - ok &= tune_ok; - print_tune_result("Tx", tune_ok, f, &tune_result); - - if (was_streaming) - restart_streaming(); - } - - if (p->valid & CFGV_INTERP_DECIM){ - int interp = p->interp; - int hb1 = 0; - int hb2 = 0; - - if (!(interp & 1)){ - hb2 = 1; - interp = interp >> 1; - } - - if (!(interp & 1)){ - hb1 = 1; - interp = interp >> 1; - } - - if (interp < MIN_CIC_INTERP || interp > MAX_CIC_INTERP) - ok = false; - else { - dsp_tx_regs->interp_rate = (hb1<<9) | (hb2<<8) | interp; - // printf("Interp: %d, register %d\n", p->interp, (hb1<<9) | (hb2<<8) | interp); - } - } - - if (p->valid & CFGV_SCALE_IQ){ - dsp_tx_regs->scale_iq = p->scale_iq; - } -#endif - - // Build reply subpacket - - r->opcode = OP_CONFIG_TX_REPLY_V2; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = ok; - r->inverted = tune_result.inverted; - r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); - r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); - r->duc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); - r->duc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); - r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); - r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); - return r->len; -} - -static size_t -config_rx_v2_cmd(const op_config_rx_v2_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_config_rx_reply_v2_t *r = (op_config_rx_reply_v2_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - struct tune_result tune_result; - memset(&tune_result, 0, sizeof(tune_result)); - - bool ok = true; - - if (p->valid & CFGV_GAIN){ - ok &= db_set_gain(rx_dboard, p->gain); - } - - if (p->valid & CFGV_FREQ){ - bool was_streaming = is_streaming(); - if (was_streaming) - stop_rx_cmd(); - - u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); - bool tune_ok = db_tune(rx_dboard, f, &tune_result); - ok &= tune_ok; - print_tune_result("Rx", tune_ok, f, &tune_result); - - if (was_streaming) - restart_streaming(); - } - - if (p->valid & CFGV_INTERP_DECIM){ - int decim = p->decim; - int hb1 = 0; - int hb2 = 0; - - if(!(decim & 1)) { - hb2 = 1; - decim = decim >> 1; - } - - if(!(decim & 1)) { - hb1 = 1; - decim = decim >> 1; - } - - if (decim < MIN_CIC_DECIM || decim > MAX_CIC_DECIM) - ok = false; - else { - dsp_rx_regs->decim_rate = (hb1<<9) | (hb2<<8) | decim; - // printf("Decim: %d, register %d\n", p->decim, (hb1<<9) | (hb2<<8) | decim); - } - } - - if (p->valid & CFGV_SCALE_IQ){ - dsp_rx_regs->scale_iq = p->scale_iq; - } - - // Build reply subpacket - - r->opcode = OP_CONFIG_RX_REPLY_V2; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = ok; - r->inverted = tune_result.inverted; - r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); - r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); - r->ddc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); - r->ddc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); - r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); - r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); - - return r->len; -} - -static size_t -read_time_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_read_time_reply_t *r = (op_read_time_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_READ_TIME_REPLY; - r->len = sizeof(*r); - r->rid = p->rid; - r->time = timer_regs->time; - - return r->len; -} - -static void -fill_db_info(u2_db_info_t *p, const struct db_base *db) -{ - p->dbid = db->dbid; - p->freq_min_hi = u2_fxpt_freq_hi(db->freq_min); - p->freq_min_lo = u2_fxpt_freq_lo(db->freq_min); - p->freq_max_hi = u2_fxpt_freq_hi(db->freq_max); - p->freq_max_lo = u2_fxpt_freq_lo(db->freq_max); - p->gain_min = db->gain_min; - p->gain_max = db->gain_max; - p->gain_step_size = db->gain_step_size; -} - -static size_t -dboard_info_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_dboard_info_reply_t *r = (op_dboard_info_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_DBOARD_INFO_REPLY; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = true; - - fill_db_info(&r->tx_db_info, tx_dboard); - fill_db_info(&r->rx_db_info, rx_dboard); - - return r->len; -} - -static size_t -peek_cmd(const op_peek_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - - putstr("peek: addr="); puthex32(p->addr); - printf(" bytes=%u\n", p->bytes); - - if ((reply_payload_space < (sizeof(*r) + p->bytes)) || - p->bytes > MAX_SUBPKT_LEN - sizeof(op_generic_t)) { - putstr("peek: insufficient reply packet space\n"); - return 0; // FIXME do partial read? - } - - r->opcode = OP_PEEK_REPLY; - r->len = sizeof(*r)+p->bytes; - r->rid = p->rid; - r->ok = true; - - memcpy_wa(reply_payload+sizeof(*r), (void *)p->addr, p->bytes); - - return r->len; -} - -static bool -poke_cmd(const op_poke_t *p) -{ - int bytes = p->len - sizeof(*p); - putstr("poke: addr="); puthex32(p->addr); - printf(" bytes=%u\n", bytes); - - uint8_t *src = (uint8_t *)p + sizeof(*p); - memcpy_wa((void *)p->addr, src, bytes); - - return true; -} - -static size_t -generic_reply(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space, - bool ok) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = p->opcode | OP_REPLY_BIT; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = ok; - - return r->len; -} - -static size_t -add_eop(void *reply_payload, size_t reply_payload_space) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_EOP; - r->len = sizeof(*r); - r->rid = 0; - r->ok = 0; - - return r->len; -} - -void -handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) -{ - unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; - unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; - int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); - - // initialize reply - memset(reply, 0, sizeof(reply)); - set_reply_hdr((u2_eth_packet_t *) reply, pkt); - - // point to beginning of payload (subpackets) - unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); - int payload_len = len - sizeof(u2_eth_packet_t); - - size_t subpktlen = 0; - - while (payload_len >= sizeof(op_generic_t)){ - const op_generic_t *gp = (const op_generic_t *) payload; - subpktlen = 0; - - // printf("\nopcode = %d\n", gp->opcode); - - switch(gp->opcode){ - case OP_EOP: // end of subpackets - goto end_of_subpackets; - - case OP_ID: - subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); - break; - - case OP_CONFIG_TX_V2: - subpktlen = config_tx_v2_cmd((op_config_tx_v2_t *) payload, - reply_payload, reply_payload_space); - break; - - case OP_CONFIG_RX_V2: - subpktlen = config_rx_v2_cmd((op_config_rx_v2_t *) payload, - reply_payload, reply_payload_space); - break; - - case OP_START_RX_STREAMING: - start_rx_streaming_cmd(&pkt->ehdr.src, (op_start_rx_streaming_t *) payload); - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); - break; - - case OP_STOP_RX: - stop_rx_cmd(); - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); - break; - - case OP_BURN_MAC_ADDR: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - burn_mac_addr((op_burn_mac_addr_t *) payload)); - break; - - case OP_CONFIG_MIMO: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - config_mimo_cmd((op_config_mimo_t *) payload)); - break; - - case OP_READ_TIME: - subpktlen = read_time_cmd(gp, reply_payload, reply_payload_space); - break; - - case OP_DBOARD_INFO: - subpktlen = dboard_info_cmd(gp, reply_payload, reply_payload_space); - break; - - case OP_SYNC_TO_PPS: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - sync_to_pps((op_generic_t *) payload)); - break; - - case OP_PEEK: - subpktlen = peek_cmd((op_peek_t *)payload, reply_payload, reply_payload_space); - break; - - case OP_POKE: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - poke_cmd((op_poke_t *)payload)); - break; - - default: - printf("app_common_v2: unhandled opcode = %d\n", gp->opcode); - break; - } - - int t = (gp->len + 3) & ~3; // bump to a multiple of 4 - payload += t; - payload_len -= t; - - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - } - - end_of_subpackets: - - // add the EOP marker - subpktlen = add_eop(reply_payload, reply_payload_space); - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - - send_reply(reply, reply_payload - reply); -} - - -/* - * Called when an ethernet packet is received. - * Return true if we handled it here, otherwise - * it'll be passed on to the DSP Tx pipe - */ -int -eth_pkt_inspector(bsm12_t *sm, int bufno) -{ - u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); - size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; - - //static size_t last_len = 0; - - // hal_toggle_leds(0x1); - - // inspect rcvd frame and figure out what do do. - - if (pkt->ehdr.ethertype != U2_ETHERTYPE) - return true; // ignore, probably bogus PAUSE frame from MAC - - int chan = u2p_chan(&pkt->fixed); - - switch (chan){ - case CONTROL_CHAN: - handle_control_chan_frame(pkt, byte_len); - return -1; - break; - - case 0: - return 0; // pass it off to DSP TX - - case 1: - return 1; // pass it off to SERDES TX - - default: - abort(); - break; - } -} - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - link_is_up = speed != 0; - hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); - printf("\neth link changed: speed = %d\n", speed); -} - - -void -print_tune_result(char *msg, bool tune_ok, - u2_fxpt_freq_t target_freq, struct tune_result *r) -{ -#if 0 - printf("db_tune %s %s\n", msg, tune_ok ? "true" : "false"); - putstr(" target_freq "); print_fxpt_freq(target_freq); newline(); - putstr(" baseband_freq "); print_fxpt_freq(r->baseband_freq); newline(); - putstr(" dxc_freq "); print_fxpt_freq(r->dxc_freq); newline(); - putstr(" residual_freq "); print_fxpt_freq(r->residual_freq); newline(); - printf(" inverted %s\n", r->inverted ? "true" : "false"); -#endif -} diff --git a/firmware/microblaze/apps/mimo_app_common_v2.h b/firmware/microblaze/apps/mimo_app_common_v2.h deleted file mode 100644 index 1e62ced37..000000000 --- a/firmware/microblaze/apps/mimo_app_common_v2.h +++ /dev/null @@ -1,63 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_APP_COMMON_H -#define INCLUDED_APP_COMMON_H - -#include <stdbool.h> -#include "usrp2_eth_packet.h" -#include "bsm12.h" -#include "memory_map.h" -#include "hal_io.h" -#include <stddef.h> -#include <db.h> - -#define CPU_TX_BUF 7 // cpu -> eth - -#define _AL4 __attribute__((aligned (4))) - -extern volatile bool link_is_up; // eth handler sets this - -// If there's a dbsm that sends to the ethernet, put it's address here -extern dbsm_t *ac_could_be_sending_to_eth; - -extern int cpu_tx_buf_dest_port; - -void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); - -/* - * Called when an ethernet packet is received. - */ -int eth_pkt_inspector(bsm12_t *sm, int bufno); - - -void link_changed_callback(int speed); - -void -print_tune_result(char *msg, bool tune_ok, - u2_fxpt_freq_t target_freq, struct tune_result *r); - - -void start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p); -void stop_rx_cmd(void); -void restart_streaming(void); -bool is_streaming(void); - -void handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); - -#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/mimo_tx.c b/firmware/microblaze/apps/mimo_tx.c deleted file mode 100644 index e0f8aa6fa..000000000 --- a/firmware/microblaze/apps/mimo_tx.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This is a down and dirty test program that confirms that the we can - * coherently transmit different signals to two USRP2s connected via a - * mimo cable. This code runs in the USRP2 connected to the ethernet. - * The other USRP runs mimo_tx_slave. The host runs test_mimo_tx. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "bsm12.h" -#include "mimo_app_common_v2.h" -#include "memcpy_wa.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> -#include "clocks.h" - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Experimental code to transmit packets to DSP Tx and SERDES - * - * Hard wire the Tx config so we don't have to deal with control stuff yet. - */ - -#define BUF_BSM12_0 4 -#define BUF_BSM12_1 5 -#define BUF_BSM12_2 6 - -//#define CPU_TX_BUF 7 // cpu -> eth - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from ethernet -buf_cmd_args_t bsm12_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t bsm12_send0_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -// send to SERDES -buf_cmd_args_t bsm12_send1_args = { - PORT_SERDES, - 0, // starts just past transport header - 0 // filled in from last_line register -}; - -bsm12_t bsm12_sm; // the state machine - -#if 0 -/* - * ================================================================ - * configure DSP RX double buffering state machine (dsp -> eth) - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to ETH -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine -#endif - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ -#if 0 - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -#endif -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ -#if 0 - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -#endif -} - - -void -stop_rx_cmd(void) -{ -#if 0 - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -#endif -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - - int tx_scale = 2500; - int interp = 8; // * 4 - - // setup some defaults - - dsp_tx_regs->freq = 429496730; // 10MHz - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; -} - - -#if 0 -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -int -fw_sets_seqno_inspector(bsm12_t *sm, int buf_this) -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - bsm12_process_status(&bsm12_sm, status); -} - -int -main(void) -{ - u2_init(); - - putstr("\nMIMO Tx\n"); - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - - output_regs->debug_mux_ctrl = 1; -#if 0 - hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - bsm12_init(&bsm12_sm, BUF_BSM12_0, - &bsm12_recv_args, &bsm12_send0_args, &bsm12_send1_args, - eth_pkt_inspector); - - -#if 0 - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; -#endif - - - // program tx registers - setup_tx(); - - // kick off the state machine - bsm12_start(&bsm12_sm); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - // dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - // dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/mimo_tx_slave.c b/firmware/microblaze/apps/mimo_tx_slave.c deleted file mode 100644 index cdf9c03c2..000000000 --- a/firmware/microblaze/apps/mimo_tx_slave.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * This is a down and dirty test program that confirms that the we can - * coherently transmit different signals to two USRP2s connected via a - * mimo cable. This code runs in the USRP2 NOT connected to the - * ethernet. The USRP connected to the ethernet runs mimo_tx. The - * host runs test_mimo_tx. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include "clocks.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> - - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between serdes and DSP pipelines - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow - * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> serdes -#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // serdes -> dsp tx - -/* - * ================================================================== - * configure DSP TX double buffering state machine (serdes -> dsp) - * ================================================================== - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from serdes -buf_cmd_args_t dsp_tx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ================================================================= - * configure DSP RX double buffering state machine (dsp -> serdes) - * ================================================================= - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to serdes -buf_cmd_args_t dsp_rx_send_args = { - PORT_SERDES, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -} - - -void -stop_rx_cmd(void) -{ - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 2500; - int interp = 8; // * 4 - - // setup some defaults - - dsp_tx_regs->freq = 429496730; // 10MHz - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; -} - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - // hal_toggle_leds(LED_A); - - uint32_t status = buffer_pool_status->status; - - if (0 && (status & ~BPS_IDLE_ALL)){ - putstr("status = "); - puthex32_nl(status); - } - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int -main(void) -{ - u2_init(); - - output_regs->led_src = 0x3; // h/w controls bottom two bits - clocks_enable_test_clk(true, 1); - - putstr("\nMIMO Tx Slave\n"); - - cpu_tx_buf_dest_port = PORT_SERDES; - - // ethernet_register_link_changed_callback(link_changed_callback); - // ethernet_init(); - - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - // puts("post clocks_mimo_config"); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -#if 0 - output_regs->debug_mux_ctrl = 1; - hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); - hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - //output_regs->flush_icache = 1; - - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // puts("post dbsm_init's"); - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // program tx registers - setup_tx(); - - // puts("post setup_tx"); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - // puts("post dbsm_start"); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/rcv_eth_packets.c b/firmware/microblaze/apps/rcv_eth_packets.c deleted file mode 100644 index 03fc94354..000000000 --- a/firmware/microblaze/apps/rcv_eth_packets.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "memcpy_wa.h" -#include <stddef.h> -#include <stdlib.h> - - -// ---------------------------------------------------------------- - -static eth_mac_addr_t dst_mac_addr = - {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; - - -// ---------------------------------------------------------------- - -#define PACKET_SIZE 1500 // bytes -#define ETH_DATA_RATE 1000000 // 1MB/s -#define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s - -#define TIMER_RATE 100000000 // 100 MHz clock - -static int timer_delta = TIMER_RATE/ETH_PACKET_RATE; // ticks between interrupts - -static volatile bool send_packet_now = false; // timer handler sets this -static volatile bool link_is_up = false; // eth handler sets this - -int packet_number = 0; - -// ---------------------------------------------------------------- - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - link_is_up = true; - break; - - case 100: - v = LS_100; - link_is_up = true; - break; - - case 1000: - v = LS_100; - link_is_up = true; - break; - - default: - v = 0; - link_is_up = false; - break; - } - - //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - putstr("\neth link changed: speed = "); - puthex16_nl(speed); -} - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = 1; -} - - -void -buffer_irq_handler(unsigned irq) -{ - // FIXME -} - -static void -init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) -{ - int i = 0; - int mark = ((bufnum & 0xff) << 24) | 0x005A0000; - - for (i = 0; i < BP_NLINES; i++){ - buf[i] = mark | i; - mark ^= 0x00FF0000; - } - - // copy header into buffer - memcpy_wa(buf, pkt, sizeof(*pkt)); -} - -static void -init_packets(void) -{ - int i; - - u2_eth_packet_t pkt __attribute__((aligned (4))); - - pkt.ehdr.dst = dst_mac_addr; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - - // fill ALL buffers for debugging - for (i = 0; i < 8; i++) - init_packet((void *)buffer_ram(i), &pkt, i); -} - -int -main(void) -{ - u2_init(); - - int prev_leds = -1; - int new_leds = 0x00; - output_regs->leds = 0x00; - - int peak_hold_count = 0; - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nrcv_eth_packets\n"); - - init_packets(); - - // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now - - // FIXME turn off timer since I don't think MTS and MFS instructions are implemented - // pic_register_handler(IRQ_TIMER, timer_irq_handler); - // hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - - ethernet_init(); - - //eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 - - // kick off a receive - bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); - - while(1){ - // u2_eth_packet_t pkt; - - new_leds = 0; - if (link_is_up) - new_leds = 0x2; - - if ((buffer_pool_status->status & (BPS_DONE_2|BPS_ERROR_2)) != 0){ - // we've got a packet! - -#if 0 - // copy to stack buffer so we can byte address it - memcpy_wa(&pkt, (void *)buffer_ram(2), sizeof(pkt)); - - putstr("Rx: src: "); - print_mac_addr(pkt.ehdr.dst_addr); - putstr(" dst: "); - print_mac_addr(pkt.ehdr.src_addr); - putstr(" ethtype: "); - puthex16(pkt.ehdr.ethertype); - putstr(" len: "); - int len = (buffer_pool_status->last_line[2] + 1) * 4; - puthex16_nl(len); -#else - volatile int *bp = buffer_ram(2); - int i; - for (i = 0; i < 16; i++){ - puthex8(i); - putchar(':'); - puthex32_nl(bp[i]); - } -#endif - - // kick off next receive - bp_clear_buf(2); - bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); - - peak_hold_count = 2048 * 10; - } - - if (peak_hold_count > 0){ - peak_hold_count--; - new_leds |= 0x1; - } - - if (new_leds != prev_leds){ - prev_leds = new_leds; - output_regs->leds = new_leds; - } - } - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/read_dbids.c b/firmware/microblaze/apps/read_dbids.c deleted file mode 100644 index 24c6d9ab4..000000000 --- a/firmware/microblaze/apps/read_dbids.c +++ /dev/null @@ -1,59 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <nonstdio.h> -#include <u2_init.h> -#include <stdbool.h> -#include <usrp2_i2c_addr.h> -#include <i2c.h> - - -int main(void) -{ - u2_init(); - - puts("\nread_dbids"); - - unsigned char dbid_tx[2]; - unsigned char dbid_rx[2]; - bool ok; - - ok = eeprom_read(I2C_ADDR_TX_A, 1, dbid_tx, 2); - if (!ok){ - puts("failed to read Tx Daugherboard EEPROM"); - } - else { - putstr("Tx Daugherboard ID: "); - puthex8(dbid_tx[1]); // MSB - puthex8(dbid_tx[0]); // LSB - newline(); - } - - ok = eeprom_read(I2C_ADDR_RX_A, 1, dbid_rx, 2); - if (!ok){ - puts("failed to read Rx Daugherboard EEPROM"); - } - else { - putstr("Rx Daugherboard ID: "); - puthex8(dbid_rx[1]); // MSB - puthex8(dbid_rx[0]); // LSB - newline(); - } - - return 0; -} diff --git a/firmware/microblaze/apps/sd_bounce.c b/firmware/microblaze/apps/sd_bounce.c deleted file mode 100644 index c1b48f170..000000000 --- a/firmware/microblaze/apps/sd_bounce.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* - * Loopback SERDES to SERDES - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "nonstdio.h" -#include "memset_wa.h" -#include <dbsm.h> -#include <stddef.h> -#include <stdlib.h> -#include <string.h> -#include <clocks.h> - - - -// ---------------------------------------------------------------- - -#define SERDES_RX_BUF_0 0 -#define SERDES_RX_BUF_1 1 - -/* - * ================================================================ - * configure SD RX double buffering state machine - * ================================================================ - */ - -// receive from SERDES -buf_cmd_args_t sd_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to SERDES -buf_cmd_args_t sd_send_args = { - PORT_SERDES, - 0, // starts with packet in line 0 - 0, // filled in from list_line register -}; - -dbsm_t sd_sm; // the state machine - - - - -// ---------------------------------------------------------------- - -#if 0 -static bool -check_packet(int *buf, int nlines) -{ - bool ok = true; - int i = 0; - for (i = 0; i < nlines; i++){ - int expected = ((2*i + 0) << 16) | (2*i+1); - if (buf[i] != expected){ - ok = false; - printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); - } - } - return ok; -} - -static void -zero_buffer(int bufno) -{ - memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); -} -#endif - - -bool -sd_rx_inspector(dbsm_t *sm, int buf_this) -{ - hal_toggle_leds(0x2); - -#if 0 - int last_line = buffer_pool_status->last_line[buf_this]; - bool ok = check_packet(buffer_ram(buf_this), last_line); - static int good = 0; - static int bad = 0; - - if (ok) - good++; - else - bad++; - - if(good+bad == 10000) { - printf("Good %d\tBad %d\n",good,bad); - good = 0; - bad = 0; - } -#endif - - return false; -} - - -inline static void -buffer_irq_handler(void) -{ - uint32_t status = buffer_pool_status->status; - dbsm_process_status(&sd_sm, status); -} - - -int -main(void) -{ - u2_init(); - - putstr("\nsd_bounce\n"); - - // Get our clock from the mimo interface - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - dbsm_init(&sd_sm, SERDES_RX_BUF_0, - &sd_recv_args, &sd_send_args, - sd_rx_inspector); - - // kick off the state machine - dbsm_start(&sd_sm); - - while(1){ - buffer_irq_handler(); - } -} diff --git a/firmware/microblaze/apps/sd_gentest.c b/firmware/microblaze/apps/sd_gentest.c deleted file mode 100644 index 35e912615..000000000 --- a/firmware/microblaze/apps/sd_gentest.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "nonstdio.h" -#include "memset_wa.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> -#include <clocks.h> -#include <mdelay.h> - -// ---------------------------------------------------------------- - -int packet_number = 0; -volatile bool send_packet_now = 0; - -#define SERDES_TX_BUF 0 -#define SERDES_RX_BUF 1 - - -#define NLINES_PER_PKT 380 - - -// ---------------------------------------------------------------- - -//static int timer_delta = (int)(MASTER_CLK_RATE * 100e-6); -static int timer_delta = 1000000; // .01 second - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = true; -} - - -static void -init_packet(int *buf) -{ - int i = 0; - for (i = 0; i < BP_NLINES; i++){ - buf[i] = ((2*i + 0) << 16) | (2*i+1); - } -} - -static bool -check_packet(int *buf, int nlines) -{ - bool ok = true; - int i = 0; - for (i = 0; i < nlines; i++){ - int expected = ((2*i + 0) << 16) | (2*i+1); - if (buf[i] != expected){ - ok = false; - printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); - } - } - return ok; -} - -static void -zero_buffer(int bufno) -{ - memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); -} - -static void -init_packets(void) -{ - // init just the one we're using - init_packet(buffer_ram(SERDES_TX_BUF)); -} - -int -main(void) -{ - u2_init(); - - // We're free running and provide clock to the MIMO interface - clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); - - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - // output_regs->debug_mux_ctrl = 1; - // hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - // hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nsd_gentest\n"); - - // Set up serdes (already enabled) - //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN | SERDES_LOOPEN); - //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN); - - init_packets(); - - // pic_register_handler(IRQ_TIMER, timer_irq_handler); - - //if (hwconfig_simulation_p()) - // timer_delta = sim_timer_delta; - - // start a receive from sd - zero_buffer(SERDES_RX_BUF); - bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); - - // fire off the first packet - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - hal_set_timeout(timer_delta); - int ready_to_send = 0; - - int counter __attribute__((unused)) = 0; - int sent = 1; - int txerr = 0; - int rxerr = 0; - int rcvd = 0; - int rxcrc = 0; - int sent_acc = 0; - int txerr_acc = 0; - int rxerr_acc = 0; - int rcvd_acc = 0; - int rxcrc_acc = 0; - -#define EXPECTING_PKT() ((counter & 0x1) == 0) -#define SEND_PKT() ((counter & 0x1) != 0) - - bool got_packet = false; - - while(1){ - uint32_t status = buffer_pool_status->status; - - if (status & (BPS_DONE(SERDES_RX_BUF))){ - bp_clear_buf(SERDES_RX_BUF); - got_packet = true; - - //hal_toggle_leds(0x2); - - // check packet - int last_line = buffer_pool_status->last_line[SERDES_RX_BUF]-1; - bool ok = check_packet(buffer_ram(SERDES_RX_BUF), last_line); - - if (ok) { - rcvd++; - //putchar('r'); - } - else { - rcvd++; - rxcrc++; - //putchar('P'); - } - // start a receive from sd - zero_buffer(SERDES_RX_BUF); - bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); - } - - if (status & (BPS_ERROR(SERDES_RX_BUF))){ - bp_clear_buf(SERDES_RX_BUF); - got_packet = true; - rcvd++; - rxerr++; - //putchar('E'); - - // start a receive from sd - zero_buffer(SERDES_RX_BUF); - bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); - } - - if (status & (BPS_DONE(SERDES_TX_BUF))){ - bp_clear_buf(SERDES_TX_BUF); - //putchar('t'); - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - //mdelay(1); - int i; - for (i = 0; i < 50; i++){ - asm volatile ("or r0, r0, r0\n\ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n"); - } - sent ++; - ready_to_send = 1; - //hal_toggle_leds(0x1); - } - - if (status & BPS_ERROR(SERDES_TX_BUF)){ - bp_clear_buf(SERDES_TX_BUF); - sent++; - txerr++; - ready_to_send = 1; - //putchar('X'); - } - - if(sent >=1000) { - printf("Status\tSENT %d\tTXERR %d\t",sent,txerr); - printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n",rcvd, rxerr, rxcrc, sent-rcvd); - sent_acc += sent; sent = 0; - txerr_acc += txerr; txerr = 0; - rcvd_acc += rcvd; rcvd = 0; - rxerr_acc += rxerr; rxerr = 0; - rxcrc_acc += rxcrc; rxcrc = 0; - } - - if(sent_acc >=10000) { - printf("\nOverall\tSENT %d\tTXERR %d\t",sent_acc,txerr_acc); - printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n\n",rcvd_acc, rxerr_acc, rxcrc_acc, sent_acc-rcvd_acc); - sent_acc = 0; - txerr_acc = 0; - rcvd_acc = 0; - rxerr_acc = 0; - rxcrc_acc = 0; - } -#if 0 - int pending = pic_regs->pending; - if (pending & PIC_TIMER_INT){ - hal_set_timeout(timer_delta); - - /* - if (EXPECTING_PKT()){ - if (!got_packet) - putchar('T'); - got_packet = false; - } - - if (SEND_PKT()){ - if (status & BPS_IDLE(SERDES_TX_BUF)) - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - } - counter++; - */ - - putchar('T'); - if(ready_to_send) { - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - counter++; - ready_to_send = 0; - } - - pic_regs->pending = PIC_TIMER_INT; // clear pending interrupt - } -#endif - } - - return 0; -} diff --git a/firmware/microblaze/apps/serdes_to_dsp.c b/firmware/microblaze/apps/serdes_to_dsp.c deleted file mode 100644 index 4994e0a69..000000000 --- a/firmware/microblaze/apps/serdes_to_dsp.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> - - -/* - * This program can respond to queries from the host - * and stream rx samples. - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu -//#define CPU_TX_BUF 1 // cpu -> eth - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - -/* - * ================================================================ - * configure DSP TX double buffering state machine - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - - -// ---------------------------------------------------------------- - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -void -start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) -{ -} - -void -stop_rx_cmd(void) -{ -} - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 256; - int interp = 32; - - op_config_tx_t def_config; - memset(&def_config, 0, sizeof(def_config)); - def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] - def_config.scale_iq = (tx_scale << 16) | tx_scale; - def_config.interp = interp; - - // setup Tx DSP regs - config_tx_cmd(&def_config); -} - - -inline static void -buffer_irq_handler(unsigned irq) -{ - //hal_toggle_leds(0x2); - - uint32_t status = buffer_pool_status->status; - - dbsm_process_status(&dsp_tx_sm, status); - - if (status & BPS_DONE(CPU_TX_BUF)){ - bp_clear_buf(CPU_TX_BUF); - } -} - -int -main(void) -{ - u2_init(); - - // Get our clock from the mimo interface - - clocks_enable_test_clk(true,1); - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nserdes_to_dsp\n"); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - // program tx registers - setup_tx(); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - while(1){ - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - } -} - diff --git a/firmware/microblaze/apps/serdes_txrx.c b/firmware/microblaze/apps/serdes_txrx.c deleted file mode 100644 index 2c47c9628..000000000 --- a/firmware/microblaze/apps/serdes_txrx.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include "clocks.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> - - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between serdes and DSP pipelines - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow - * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> serdes -#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // serdes -> dsp tx - -/* - * ================================================================== - * configure DSP TX double buffering state machine (serdes -> dsp) - * ================================================================== - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from serdes -buf_cmd_args_t dsp_tx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ================================================================= - * configure DSP RX double buffering state machine (dsp -> serdes) - * ================================================================= - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to serdes -buf_cmd_args_t dsp_rx_send_args = { - PORT_SERDES, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -} - - -void -stop_rx_cmd(void) -{ - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 256; - int interp = 32; - - // setup some defaults - - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = interp; -} - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - // hal_toggle_leds(LED_A); - - uint32_t status = buffer_pool_status->status; - - if (0 && (status & ~BPS_IDLE_ALL)){ - putstr("status = "); - puthex32_nl(status); - } - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int -main(void) -{ - u2_init(); - - output_regs->led_src = 0x3; // h/w controls bottom two bits - clocks_enable_test_clk(true, 1); - - putstr("\nSERDES TxRx\n"); - - cpu_tx_buf_dest_port = PORT_SERDES; - - // ethernet_register_link_changed_callback(link_changed_callback); - // ethernet_init(); - - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - // puts("post clocks_mimo_config"); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -#if 0 - output_regs->debug_mux_ctrl = 1; - hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); - hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - //output_regs->flush_icache = 1; - - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // puts("post dbsm_init's"); - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // program tx registers - setup_tx(); - - // puts("post setup_tx"); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - // puts("post dbsm_start"); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/set_hw_rev.c b/firmware/microblaze/apps/set_hw_rev.c deleted file mode 100644 index d4ac8ff81..000000000 --- a/firmware/microblaze/apps/set_hw_rev.c +++ /dev/null @@ -1,45 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <u2_init.h> -#include <nonstdio.h> -#include <i2c.h> -#include <usrp2_i2c_addr.h> - -#define HW_REV_MAJOR 0 -#define HW_REV_MINOR 3 - -int -main(void) -{ - u2_init(); - - putstr("\nset_hw_rev\n"); - - bool ok = true; - unsigned char maj = HW_REV_MAJOR; - unsigned char min = HW_REV_MINOR; - ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); - ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); - - if (ok) - printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - else - printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - - return 0; -} diff --git a/firmware/microblaze/apps/test1.c b/firmware/microblaze/apps/test1.c deleted file mode 100644 index c3cc3be56..000000000 --- a/firmware/microblaze/apps/test1.c +++ /dev/null @@ -1,282 +0,0 @@ -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include "nonstdio.h" - -// Globals -#define EMPTY 0 -#define FILLING 1 -#define FULL 2 -#define EMPTYING 3 - -#define PORT 2 // ethernet = 2, serdes = 0 -int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; -int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; - -int buffer_state[4]; - - -void double_buffering(int port); - -// -// We register this in the secondary interrupt vector. -// It's called on buffer manager interrupts -// -void -buffer_irq_handler(unsigned irq) -{ - double_buffering(PORT); -} - -int -main(void) -{ - int i; - - u2_init(); - - // Control LEDs - output_regs->leds = 0x02; - - // Turn on ADCs - output_regs->adc_ctrl = 0x0A; - - // Set up TX Chain - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (1 << 16) | 1; - dsp_tx_regs->interp_rate = 8; - - // Set up RX Chain - dsp_rx_regs->freq = 0; - dsp_rx_regs->scale_iq = (1 << 16) | 1; - dsp_rx_regs->decim_rate = 8; - - // Set up buffer control, using only 4 for now - for(i=0;i<4;i++) - buffer_state[i] = EMPTY; - - // Set up DSP RX - buffer_state[0] = FILLING; - serdes_tx_idle = 1; - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines - - //dsp_rx_regs->run_rx = 1; // Start DSP_RX - putstr("Done DSP RX setup\n"); - - // Set up serdes RX - buffer_state[2] = FILLING; - dsp_tx_idle = 1; - bp_receive_to_buf(2, PORT, 1, 5, 504); - - while (buffer_pool_status->status == 0) // wait for completion of DSP RX - ; - - putstr("Done DSP TX setup\n"); - //dsp_tx_regs->run_tx = 1; - - // register interrupt handler - pic_register_handler(IRQ_BUFFER, buffer_irq_handler); - - while (1) - ; - - hal_finish(); - return 1; -} - -void -double_buffering(int port) { - unsigned int localstatus = buffer_pool_status->status; - - if(localstatus & BPS_DONE_0) { - bp_clear_buf(0); - if(buffer_state[0] == FILLING) { - buffer_state[0] = FULL; - if(buffer_state[1] == EMPTY) { - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[0] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines - buffer_state[0] = FILLING; - } - if(buffer_state[1] == FULL) { - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 0\n"); - } - if(localstatus & BPS_DONE_1) { - bp_clear_buf(1); - if(buffer_state[1] == FILLING) { - buffer_state[1] = FULL; - if(buffer_state[0] == EMPTY) { - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[0] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[1] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - if(buffer_state[0] == FULL) { - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 1\n"); - } - if(localstatus & BPS_DONE_2) { - bp_clear_buf(2); - if(buffer_state[2] == FILLING) { - buffer_state[2] = FULL; - if(buffer_state[3] == EMPTY) { - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines - buffer_state[3] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[2] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 - buffer_state[2] = FILLING; - } - if(buffer_state[3] == FULL) { - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 2\n"); - } - if(localstatus & BPS_DONE_3) { - bp_clear_buf(3); - if(buffer_state[3] == FILLING) { - buffer_state[3] = FULL; - if(buffer_state[2] == EMPTY) { - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines - buffer_state[2] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[3] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 - buffer_state[3] = FILLING; - } - if(buffer_state[2] == FULL) { - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 3\n"); - } -} - -// Spare Code - -#if 0 - // Set up LSDAC - int i = 0; - while(1) { - int command = (3 << 19) | (0 << 16) | (i & 0xffff); - spi_transact(SPI_TXONLY, SPI_SS_TX_DAC, command, 24, 1); // negate TX phase - i++; - } -#endif - -#if 0 - // Write to buffer 0 - int *buf = (int *)(BUFFER_BASE + BUFFER_0); - puthex_nl((int)buf); - - for(i=0;i<BUFFER_SIZE;i++) - buf[i] = i; - - putstr("Filled buffer 0\n"); - - // Write to buffer 1 - buf = (int *)(BUFFER_BASE + BUFFER_1); - puthex_nl((int)buf); - for(i=0;i<BUFFER_SIZE;i++) - buf[i] = i + ((i^0xFFFF) << 16); - - putstr("Filled buffer 1\n"); - -#endif - -#if 0 - // rx SERDES into buffer #2 (buf,port,step,fl,ll) - bp_receive_to_buf(2, 0, 1, 10, 300); - putstr("SERDES RX buffer setup\n"); - - // send SERDES from buffer #0 (buf,port,step,fl,ll) - bp_send_from_buf(0, 0, 1, 20, 200); - putstr("SERDES TX buffer setup\n"); - -#endif - -#if 0 - // send to DACs from buffer #1 - bp_send_from_buf(1 /*buf#*/, 1 /*port*/, 1 /*step*/, 20 /*fl*/, 250 /*ll*/); - putstr("DAC Buffer setup\n"); -#endif - -#if 0 - //putstr("ENTER INT\n"); - for(i=0;i<8;i++) - if(*status & (1<<i)) { - //putstr("Clearing buf "); - puthex_nl(i); - bp_clear_buf(i); - } - //putstr("EXIT INT\n"); -#endif diff --git a/firmware/microblaze/apps/test_db_spi.c b/firmware/microblaze/apps/test_db_spi.c deleted file mode 100644 index f4fa98ef1..000000000 --- a/firmware/microblaze/apps/test_db_spi.c +++ /dev/null @@ -1,35 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <u2_init.h> -#include <nonstdio.h> -#include <hal_io.h> -#include <spi.h> - -int -main(void) -{ - u2_init(); - - puts("\ntest_db_spi"); - - while(1){ - spi_transact(SPI_TXONLY, SPI_SS_RX_DB, 0xCC33, 16, SPIF_PUSH_FALL); - spi_transact(SPI_TXONLY, SPI_SS_TX_DB, 0x33CC, 16, SPIF_PUSH_FALL); - } -} diff --git a/firmware/microblaze/apps/test_i2c.c b/firmware/microblaze/apps/test_i2c.c deleted file mode 100644 index f349ead88..000000000 --- a/firmware/microblaze/apps/test_i2c.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <stdio.h> -#include <stdint.h> -#include <u2_init.h> /* FIXME */ -#include <i2c.h> -#include <usrp2_i2c_addr.h> -#include <string.h> -#include <hal_io.h> - - - -#define ASSERT_TRUE(x) \ - do { \ - if (!(x)){ \ - printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - -#define ASSERT_FALSE(x) \ - do { \ - if (x){ \ - printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - - -#define BUFSIZE 128 - -int -main(void) -{ - int i; - bool ok; - int nerrors = 0; - uint8_t buf[BUFSIZE]; - int not_dev_addr = 0x35; // no device with this address on the i2c bus. - int offset; - int len; - - u2_init(); - - puts("test_i2c\n"); - - // try writing a non-existent device - buf[0] = 0xA5; - ok = i2c_write(not_dev_addr, buf, 1); - ASSERT_FALSE(ok); - - // try read from non-existent device - buf[0] = 0; - ok = i2c_read(not_dev_addr, buf, 1); - ASSERT_FALSE(ok); - - // try writing eeprom - offset = 31; - len = 8; - memset(buf, 0, sizeof(buf)); - for (i = 0; i < len; i++) - buf[i] = i; - ok = eeprom_write(I2C_ADDR_MBOARD, offset, buf, len); - ASSERT_TRUE(ok); - - // now try to read it back - offset = 31; - len = 8; - memset(buf, 0, sizeof(buf)); - ok = eeprom_read(I2C_ADDR_MBOARD, offset, buf, len); - ASSERT_TRUE(ok); - - // check result - for (i = 0; i < len; i++){ - if (buf[i] != i){ - printf("buf[%d] = %d, should be %d\n", i, buf[i], i); - nerrors++; - } - } - - if (nerrors == 0){ - output_regs->leds = 0x3; - puts("PASSED\n"); - } - else { - output_regs->leds = 0x0; - puts("FAILED\n"); - } - - hal_finish(); - return 0; -} - diff --git a/firmware/microblaze/apps/test_lsadc.c b/firmware/microblaze/apps/test_lsadc.c deleted file mode 100644 index 5fda29cd7..000000000 --- a/firmware/microblaze/apps/test_lsadc.c +++ /dev/null @@ -1,57 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <lsadc.h> -#include <lsdac.h> -#include <u2_init.h> -#include <nonstdio.h> -#include <hal_io.h> - -int -main(void) -{ - u2_init(); - - puts("\ntest_lsadc"); - - uint32_t r; - - unsigned int up_counter = 0; - - while (1){ - unsigned int v; - v = up_counter; - - lsdac_write_rx(0, v << 0); - lsdac_write_rx(2, v << 1); - -#if 1 - r = lsadc_read_rx(0); - lsdac_write_rx(1, r & 0x0fff); - //puthex32_nl(r); -#endif - -#if 1 - r = lsadc_read_rx(1); - lsdac_write_rx(3, r & 0x0fff); - //puthex32_nl(r); -#endif - - up_counter++; - } -} diff --git a/firmware/microblaze/apps/test_lsdac.c b/firmware/microblaze/apps/test_lsdac.c deleted file mode 100644 index 8c1bf333b..000000000 --- a/firmware/microblaze/apps/test_lsdac.c +++ /dev/null @@ -1,51 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <lsdac.h> -#include <u2_init.h> -#include <nonstdio.h> -#include <hal_io.h> - -int -main(void) -{ - u2_init(); - - puts("\ntest_lsdac"); - - unsigned int up_counter = 0; - unsigned int dn_counter = 0; - - while(1){ - unsigned int v; - v = up_counter; - lsdac_write_rx(0, v << 0); - lsdac_write_rx(1, v << 1); - lsdac_write_rx(2, v << 2); - lsdac_write_rx(3, v << 3); - - v = up_counter; - lsdac_write_tx(0, v << 0); - lsdac_write_tx(1, v << 1); - lsdac_write_tx(2, v << 2); - lsdac_write_tx(3, v << 3); - - up_counter++; - dn_counter--; - } -} diff --git a/firmware/microblaze/apps/test_phy_comm.c b/firmware/microblaze/apps/test_phy_comm.c deleted file mode 100644 index d312ca4cc..000000000 --- a/firmware/microblaze/apps/test_phy_comm.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -// check communication with ethernet PHY chip - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "ethernet.h" -#include "pic.h" -#include "nonstdio.h" - - -#define DELTA_T 12500000 // .125s (10ns per tick) -//#define DELTA_T 10000 - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - - - -#define U2_ETHERTYPE 0xBEEF - - -static volatile int led_link_up_flag = 0; - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - led_link_up_flag = 0x2; - break; - - case 100: - v = LS_100; - led_link_up_flag = 0x2; - break; - - case 1000: - v = LS_100; - led_link_up_flag = 0x2; - break; - - default: - v = 0; - led_link_up_flag = 0; - break; - } - - //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - putstr("\neth link changed: speed = "); - puthex_nl(speed); -} - -void -timer_handler(unsigned irq) -{ - static int led_counter = 0; - - hal_set_timeout(DELTA_T); // schedule next timeout - output_regs->leds = (led_counter++ & 0x1) | led_link_up_flag; -} - -int -main(void) -{ - u2_init(); - - putstr("\n test_phy_comm\n"); - - pic_register_handler(IRQ_ONETIME, timer_handler); - hal_set_timeout(DELTA_T); // schedule timeout - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - ethernet_register_link_changed_callback(link_changed_callback); - - output_regs->phy_ctrl = 1; /* reset the eth PHY */ - output_regs->phy_ctrl = 0; - - ethernet_init(); - - while(1) - ; - - return 0; -} diff --git a/firmware/microblaze/apps/test_ram.c b/firmware/microblaze/apps/test_ram.c deleted file mode 100644 index 77ee693f6..000000000 --- a/firmware/microblaze/apps/test_ram.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <stdio.h> -#include <stdint.h> -#include <u2_init.h> /* FIXME */ -#include <sd.h> -#include <string.h> -#include <hal_io.h> -#include <nonstdio.h> -#include <hal_uart.h> - -#define ASSERT_TRUE(x) \ - do { \ - if (!(x)){ \ - printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - -#define ASSERT_FALSE(x) \ - do { \ - if (x){ \ - printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - - -#define BUFSIZE 128 - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int -main(void) -{ - - u2_init(); - puts("\ntest_ram\n"); - int success = test_ram(); - if(success) - puts("RAM Passed Tests\n"); - else - puts("RAM Failed\n"); - - hal_finish(); - return 0; -} - diff --git a/firmware/microblaze/apps/test_sd.c b/firmware/microblaze/apps/test_sd.c deleted file mode 100644 index 494432d7f..000000000 --- a/firmware/microblaze/apps/test_sd.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <stdio.h> -#include <stdint.h> -#include <u2_init.h> /* FIXME */ -#include <sd.h> -#include <string.h> -#include <hal_io.h> -#include <nonstdio.h> - - -#define ASSERT_TRUE(x) \ - do { \ - if (!(x)){ \ - printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - -#define ASSERT_FALSE(x) \ - do { \ - if (x){ \ - printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - - -#define BUFSIZE 128 - -int -main(void) -{ - int i; - unsigned char buf[512]; - - u2_init(); - - puts("\ntest_sd\n"); - - - i = sd_init(); - if(i) - puts("Successfully Init'ed Card\n"); - else - puts("FAILED INIT of Card\n"); - - i = sd_read_block(2048,buf); - if(i) { - puts("READ Command accepted\n"); - for(i=0;i<512;i++) - if((i&15) == 15) - puthex8_nl(buf[i]); - else { - puthex8(buf[i]); - putchar(' '); - } - } - else - puts("READ Command Rejected\n"); - - puts("Done"); - hal_finish(); - return 0; -} - diff --git a/firmware/microblaze/apps/timer_test.c b/firmware/microblaze/apps/timer_test.c deleted file mode 100644 index 44e80b5f1..000000000 --- a/firmware/microblaze/apps/timer_test.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include "nonstdio.h" -#include "hal_io.h" - -#define DELTA_T 500 // 5 us (10ns per tick) - - -void -timer_handler(unsigned irq) -{ - hal_set_timeout(DELTA_T); - - putstr("Tick: "); - puthex_nl(0); -} - -int -main(void) -{ - u2_init(); - - // setup timer - - putstr("Setting up timer\n"); - pic_register_handler(IRQ_ONETIME, timer_handler); - - hal_set_timeout(DELTA_T); - - while (1) - ; - - putstr("Done Testing\n"); - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/tx_standalone.c b/firmware/microblaze/apps/tx_standalone.c deleted file mode 100644 index 1645fa8ba..000000000 --- a/firmware/microblaze/apps/tx_standalone.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include <stdbool.h> -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "memcpy_wa.h" -#include "dbsm.h" -#include <stddef.h> -#include <stdlib.h> -#include <string.h> - -#define _AL4 __attribute__((aligned (4))) - -#define USE_BUFFER_INTERRUPT 0 // 0 or 1 - - -static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz - -/* - * This program can respond to queries from the host - * and stream rx samples. - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu -#define CPU_TX_BUF 1 // cpu -> eth - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - - -/* - * ================================================================ - * configure DSP RX double buffering state machine - * ================================================================ - */ - - -// 4 lines of ethernet hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE 5 -#define DSP_RX_SAMPLES_PER_FRAME 128 -#define DSP_RX_EXTRA_LINES 1 // writes timestamp - -// Receive from DSP Rx -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to ethernet -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from last_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - -/* - * ================================================================ - * configure DSP TX double buffering state machine - * ================================================================ - */ - -// 4 lines of ethernet hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE 4 -#define DSP_TX_SAMPLES_PER_FRAME 250 // not used except w/ debugging -#define DSP_TX_EXTRA_LINES 2 // reads word0 + timestamp - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past ethernet header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * send constant buffer to DSP TX - */ -static inline void -SEND_CONST_TO_DSP_TX(void) -{ - bp_send_from_buf(DSP_TX_BUF_0, PORT_DSP, 1, - DSP_TX_FIRST_LINE, - DSP_TX_FIRST_LINE + DSP_TX_EXTRA_LINES + DSP_TX_SAMPLES_PER_FRAME - 1); -} - -// ---------------------------------------------------------------- - - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -void link_changed_callback(int speed); -static volatile bool link_is_up = false; // eth handler sets this - - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout -} - -// Tx DSP underrun -void -underrun_irq_handler(unsigned irq) -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - dbsm_stop(&dsp_tx_sm); - - // FIXME anything else? - - putstr("\nirq: underrun\n"); -} - -// Rx DSP overrun -void -overrun_irq_handler(unsigned irq) -{ - dsp_rx_regs->clear_state = 1; - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); - dbsm_stop(&dsp_rx_sm); - - // FIXME anything else? - - putstr("\nirq: overrun\n"); -} - -static void -start_tx_transfers(void) -{ - bp_clear_buf(DSP_TX_BUF_0); // FIXME, really goes in state machine - bp_clear_buf(DSP_TX_BUF_1); - - // fill everything with a constant 32k + 0j - - uint32_t const_sample = (32000 << 16) | 0; - int i; - for (i = 0; i < BP_NLINES; i++){ - buffer_ram(DSP_TX_BUF_0)[i] = const_sample; - buffer_ram(DSP_TX_BUF_1)[i] = const_sample; - } - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - //pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, - U2P_TX_IMMEDIATE | U2P_TX_START_OF_BURST, 0); - u2p_set_timestamp(&pkt.fixed, T_NOW); - - memcpy_wa(buffer_ram(DSP_TX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_TX_BUF_1), &pkt, sizeof(pkt)); - - - int tx_scale = 256; - - // setup Tx DSP regs - dsp_tx_regs->clear_state = 1; // reset - dsp_tx_regs->freq = 408021893; // 9.5 MHz [2**32 * fc/fsample] - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = 32; - - // kick off the state machine - // dbsm_start(&dsp_rx_sm); - - SEND_CONST_TO_DSP_TX(); // send constant buffer to DSP TX -} - - -void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - if (0){ - putstr("irq: "); - puthex32(status); - putchar('\n'); - } - - if (status & BPS_ERROR_ALL){ - // FIXME rare path, handle error conditions - } - - if (status & BPS_DONE(DSP_TX_BUF_0)){ - bp_clear_buf(DSP_TX_BUF_0); - SEND_CONST_TO_DSP_TX(); - hal_toggle_leds(0x1); - } - -} - -int -main(void) -{ - u2_init(); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\ntx_only\n"); - - // Control LEDs - hal_set_leds(0x0, 0x3); - - if (USE_BUFFER_INTERRUPT) - pic_register_handler(IRQ_BUFFER, buffer_irq_handler); - - pic_register_handler(IRQ_OVERRUN, overrun_irq_handler); - pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); - - //pic_register_handler(IRQ_TIMER, timer_irq_handler); - //hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - - ethernet_init(); - - // initialize double buffering state machine for DSP RX -> Ethernet - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - - // setup receive from ETH - // bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); - -#if 0 - if (hwconfig_simulation_p()){ - // If we're simulating, pretend that we got a start command from the host - eth_mac_addr_t host = {{ 0x00, 0x0A, 0xE4, 0x3E, 0xD2, 0xD5 }}; - start_rx_cmd(&host); - } -#endif - - start_tx_transfers(); // send constant buffers to DSP TX - - while(1){ - if (!USE_BUFFER_INTERRUPT) - buffer_irq_handler(0); - } -} - -// ---------------------------------------------------------------- - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - link_is_up = true; - break; - - case 100: - v = LS_100; - link_is_up = true; - break; - - case 1000: - v = LS_100; - link_is_up = true; - break; - - default: - v = 0; - link_is_up = false; - break; - } - - //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - // hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); - - printf("\neth link changed: speed = %d\n", speed); -} diff --git a/firmware/microblaze/include/.gitignore b/firmware/microblaze/include/.gitignore deleted file mode 100644 index b336cc7ce..000000000 --- a/firmware/microblaze/include/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -/Makefile -/Makefile.in diff --git a/firmware/microblaze/include/Makefile.am b/firmware/microblaze/include/Makefile.am deleted file mode 100644 index 6afbbcd12..000000000 --- a/firmware/microblaze/include/Makefile.am +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2008 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/Makefile.common - -SUBDIRS = net - -noinst_HEADERS = \ - usrp2_fpga_regs.h \ - usrp2_i2c_addr.h \ - usrp2_clock_bits.h \ - usrp2_types.h \ - vrt/bits.h \ - vrt/types.h diff --git a/firmware/microblaze/include/compiler.h b/firmware/microblaze/include/compiler.h deleted file mode 100644 index 4fa9b49f8..000000000 --- a/firmware/microblaze/include/compiler.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_COMPILER_H -#define INCLUDED_COMPILER_H - -// FIXME gcc specific. -#define _AL4 __attribute__((aligned (4))) - - -#endif /* INCLUDED_COMPILER_H */ diff --git a/firmware/microblaze/include/net/.gitignore b/firmware/microblaze/include/net/.gitignore deleted file mode 100644 index 282522db0..000000000 --- a/firmware/microblaze/include/net/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -Makefile -Makefile.in diff --git a/firmware/microblaze/include/net/Makefile.am b/firmware/microblaze/include/net/Makefile.am deleted file mode 100644 index 32b0bf9dc..000000000 --- a/firmware/microblaze/include/net/Makefile.am +++ /dev/null @@ -1,23 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/Makefile.common - -noinst_HEADERS = \ - eth_mac_addr.h \ - padded_eth_hdr.h \ - socket_address.h diff --git a/firmware/microblaze/include/net/eth_mac_addr.h b/firmware/microblaze/include/net/eth_mac_addr.h deleted file mode 100644 index b44fb68f7..000000000 --- a/firmware/microblaze/include/net/eth_mac_addr.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2009 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_ETH_MAC_ADDR_H -#define INCLUDED_ETH_MAC_ADDR_H - -#include <stdint.h> - -// Ethernet MAC address - -typedef struct { - uint8_t addr[6]; -} eth_mac_addr_t; - -#endif /* INCLUDED_ETH_MAC_ADDR_H */ diff --git a/firmware/microblaze/include/net/padded_eth_hdr.h b/firmware/microblaze/include/net/padded_eth_hdr.h deleted file mode 100644 index df816734f..000000000 --- a/firmware/microblaze/include/net/padded_eth_hdr.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009,2010 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_PADDED_ETH_HDR_H -#define INCLUDED_PADDED_ETH_HDR_H - -#include <compiler.h> -#include <net/eth_mac_addr.h> - -/*! - * \brief Standard 14-byte ethernet header plus two leading bytes of padding. - * - * This is what a buffer contains in line 1 when using the "slow mode" - */ -typedef struct { - uint16_t pad; - eth_mac_addr_t dst; - eth_mac_addr_t src; - uint16_t ethertype; -} _AL4 padded_eth_hdr_t; - - -#endif /* INCLUDED_PADDED_ETH_HDR_H */ diff --git a/firmware/microblaze/include/net/socket_address.h b/firmware/microblaze/include/net/socket_address.h deleted file mode 100644 index 336f30a0c..000000000 --- a/firmware/microblaze/include/net/socket_address.h +++ /dev/null @@ -1,41 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2010 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_SOCKET_ADDRESS_H -#define INCLUDED_SOCKET_ADDRESS_H - -#include <lwip/ip_addr.h> - -// port and address are in network byte order - -typedef struct socket_address { - unsigned short port; - struct ip_addr addr; -} socket_address_t; - -static inline struct socket_address -make_socket_address(struct ip_addr addr, int port) -{ - struct socket_address r; - r.port = port; - r.addr = addr; - return r; -} - - - -#endif /* INCLUDED_SOCKET_ADDRESS_H */ diff --git a/firmware/microblaze/include/usrp2_clock_bits.h b/firmware/microblaze/include/usrp2_clock_bits.h deleted file mode 100644 index d2052e941..000000000 --- a/firmware/microblaze/include/usrp2_clock_bits.h +++ /dev/null @@ -1,55 +0,0 @@ -// -// Copyright 2010 Ettus Research LLC -// -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ -#ifndef INCLUDED_USRP2_CLOCK_BITS_H -#define INCLUDED_USRP2_CLOCK_BITS_H - -#define _MC_WE_LOCK 0x0001 -#define _MC_MIMO_CLK_INPUT 0x0002 // else SMA input - -/* - * Derived masks (use these): - * - * We get our input from 1 of three places: - * Our free running oscilator, our SMA connector, or from the MIMO connector - */ -#define MC_WE_DONT_LOCK 0x0000 -#define MC_WE_LOCK_TO_SMA (_MC_WE_LOCK | 0) -#define MC_WE_LOCK_TO_MIMO (_MC_WE_LOCK | _MC_MIMO_CLK_INPUT) - -/* - * Independent of the source of the clock, we may or may not drive our - * clock onto the mimo connector. Note that there are dedicated clock - * signals in each direction, so disaster doesn't occurs if we're - * unnecessarily providing clock. - */ -#define MC_PROVIDE_CLK_TO_MIMO 0x0004 - -#define MC_REF_CLK_MASK 0x0f - -#define MC_PPS_SOURCE_SMA (0x00 << 4) -#define MC_PPS_SOURCE_MIMO (0x01 << 4) - -#define MC_PPS_POLARITY_NEG (0x00 << 5) -#define MC_PPS_POLARITY_POS (0x01 << 5) - -#endif /* INCLUDED_USRP2_CLOCK_BITS_H */ diff --git a/firmware/microblaze/include/usrp2_fpga_regs.h b/firmware/microblaze/include/usrp2_fpga_regs.h deleted file mode 100644 index b0f83df60..000000000 --- a/firmware/microblaze/include/usrp2_fpga_regs.h +++ /dev/null @@ -1,80 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_USRP2_FPGA_REGS_H -#define INCLUDED_USSRP2_FPGA_REGS_H - -#include "usrp2_cdefs.h" - -__U2_BEGIN_DECLS - -// ---------------------------------------------------------------- - -#define DSP_CORE_TX_BASE 128 - -// DUC center frequency tuning word (phase increment) -#define FR_TX_FREQ_0 (0 + DSP_CORE_TX_BASE) - -// I & Q output scaling, 16.0 format ((I_SCALE << 16) | Q_SCALE) -#define FR_TX_SCALE_0 (1 + DSP_CORE_TX_BASE) - -// Tx interpolation rate (set to 1 less than desired rate) -#define FR_TX_INTERP_RATE_0 (2 + DSP_CORE_TX_BASE) - -// Write 1 (actually anything) to clear tx state -#define FR_TX_CLEAR_STATE_0 (3 + DSP_CORE_TX_BASE) - -// ---------------------------------------------------------------- - -#define DSP_CORE_RX_BASE 160 - -// DDC center frequency tuning word (phase increment) -#define FR_RX_FREQ_0 (0 + DSP_CORE_RX_BASE) - -// I & Q input scaling, 16.0 format ((I_SCALE << 16) | Q_SCALE) -#define FR_RX_SCALE_0 (1 + DSP_CORE_RX_BASE) - -// Rx decimation rate (set to 1 less than desired rate) -#define FR_RX_DECIM_RATE_0 (2 + DSP_CORE_RX_BASE) - -// The next two registers concatenated are the Rx command register. -// -// Writing FR_RX_TIME_TO_RX_0 writes the concatenated value into the -// cmd queue. Thus, if you're writing both, be sure to write -// FR_RX_QTY_0 first. -// -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -// | Timestamp | -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - -#define FR_RX_TIME_TO_RX (3 + DSP_CORE_RX_BASE) - -// 23-bits 9-bits -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -// | number_of_lines | lines_per_frame | -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - -#define FR_RX_QTY_0 (4 + DSP_CORE_RX_BASE) - -// write a 1 (anything actually) to clear the overrun -#define FR_RX_CLR_OVERRUN_0 (5 + DSP_CORE_RX_BASE) - - -__U2_END_DECLS - -#endif /* INCLUDED_USRP2_FPGA_REGS_H */ diff --git a/firmware/microblaze/include/usrp2_i2c_addr.h b/firmware/microblaze/include/usrp2_i2c_addr.h deleted file mode 100644 index 46f5a7556..000000000 --- a/firmware/microblaze/include/usrp2_i2c_addr.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2004,2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_USRP2_I2C_ADDR_H -#define INCLUDED_USRP2_I2C_ADDR_H - -// I2C addresses - -#define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx - -#define I2C_ADDR_MBOARD (I2C_DEV_EEPROM | 0x0) -#define I2C_ADDR_TX_A (I2C_DEV_EEPROM | 0x4) -#define I2C_ADDR_RX_A (I2C_DEV_EEPROM | 0x5) - - -// format of USRP2 motherboard rom -// 00: 0x00 h/w rev (LSB) -// 01: 0x00 h/w rev (MSB) -// 02: 0x00 MAC addr 0 -// 03: 0x50 MAC addr 1 -// 04: 0xC2 MAC addr 2 -// 05: 0x85 MAC addr 3 -// 06: 0x3. MAC addr 4 -// 07: 0x.. MAC addr 5 - -#define MBOARD_REV_LSB 0x00 -#define MBOARD_REV_MSB 0x01 -#define MBOARD_MAC_ADDR 0x02 -#define MBOARD_IP_ADDR 0x0C - - -// format of daughterboard EEPROM -// 00: 0xDB code for ``I'm a daughterboard'' -// 01: .. Daughterboard ID (LSB) -// 02: .. Daughterboard ID (MSB) -// 03: .. io bits 7-0 direction (bit set if it's an output from m'board) -// 04: .. io bits 15-8 direction (bit set if it's an output from m'board) -// 05: .. ADC0 DC offset correction (LSB) -// 06: .. ADC0 DC offset correction (MSB) -// 07: .. ADC1 DC offset correction (LSB) -// 08: .. ADC1 DC offset correction (MSB) -// ... -// 1f: .. negative of the sum of bytes [0x00, 0x1e] - -#define DB_EEPROM_MAGIC 0x00 -#define DB_EEPROM_MAGIC_VALUE 0xDB -#define DB_EEPROM_ID_LSB 0x01 -#define DB_EEPROM_ID_MSB 0x02 -#define DB_EEPROM_OE_LSB 0x03 -#define DB_EEPROM_OE_MSB 0x04 -#define DB_EEPROM_OFFSET_0_LSB 0x05 // offset correction for ADC or DAC 0 -#define DB_EEPROM_OFFSET_0_MSB 0x06 -#define DB_EEPROM_OFFSET_1_LSB 0x07 // offset correction for ADC or DAC 1 -#define DB_EEPROM_OFFSET_1_MSB 0x08 -#define DB_EEPROM_CHKSUM 0x1f - -#define DB_EEPROM_CLEN 0x20 // length of common portion of eeprom - -#define DB_EEPROM_CUSTOM_BASE DB_EEPROM_CLEN // first avail offset for - // daughterboard specific use - -#endif /* INCLUDED_USRP2_I2C_ADDR_H */ - diff --git a/firmware/microblaze/include/usrp2_types.h b/firmware/microblaze/include/usrp2_types.h deleted file mode 100644 index fe45936f0..000000000 --- a/firmware/microblaze/include/usrp2_types.h +++ /dev/null @@ -1,105 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_USRP2_TYPES_H -#define INCLUDED_USRP2_TYPES_H - -#include <stdint.h> - -/*! - * \brief Fixed point representation of a frequency in Hertz (VITA-49 compatible) - * - * 64-bit two's complement, with the radix point 20 bits up from the bottom. - * Q44.20 format (20 bits to the right of the radix point) - * - * Values range from +/- 8.79 terahertz with a resolution of 0.95 microhertz. - */ -typedef int64_t u2_fxpt_freq_t; - -#define U2_FPF_RP 20 // location of radix point in u2_fxpt_freq_t - -// macro so we can init structs at compile time -#define U2_DOUBLE_TO_FXPT_FREQ(f) (int64_t)((f) * (1LL << U2_FPF_RP)) - -static inline u2_fxpt_freq_t -u2_double_to_fxpt_freq(double f) -{ - return U2_DOUBLE_TO_FXPT_FREQ(f); -} - -static inline int -u2_fxpt_freq_round_to_int(u2_fxpt_freq_t fx) -{ - return (int)((fx+(1<<(U2_FPF_RP-1)))>>U2_FPF_RP); -} - -static inline double -u2_fxpt_freq_to_double(u2_fxpt_freq_t fx) -{ - return ((double) fx) * 1.0/(1 << U2_FPF_RP); -} - -static inline uint32_t -u2_fxpt_freq_hi(u2_fxpt_freq_t f) -{ - return ((f >> 32) & 0xffffffff); -} - -static inline uint32_t -u2_fxpt_freq_lo(u2_fxpt_freq_t f) -{ - return (f & 0xffffffff); -} - -static inline u2_fxpt_freq_t -u2_fxpt_freq_from_hilo(uint32_t hi, uint32_t lo) -{ - return (((u2_fxpt_freq_t) hi) << 32) | lo; -} - -/*! - * \brief Fixed point representation of a gain in dB (VITA-49 compatible) - * - * 16-bit two's complement, with the radix point 7 bits up from the bottom. - * Q9.7 format (7 bits to the right of the radix point) - */ -typedef int16_t u2_fxpt_gain_t; - -#define U2_FPG_RP 7 // location of radix point in u2_fxpt_gain_t - -// macro so we can init structs at compile time -#define U2_DOUBLE_TO_FXPT_GAIN(g) (int16_t)((g) * (1 << U2_FPG_RP)) - -static inline u2_fxpt_gain_t -u2_double_to_fxpt_gain(double g) -{ - return U2_DOUBLE_TO_FXPT_GAIN(g); -} - -static inline float -u2_fxpt_gain_to_double(u2_fxpt_gain_t fx) -{ - return ((double) fx) * 1.0/(1 << U2_FPG_RP); -} - -static inline int -u2_fxpt_gain_round_to_int(u2_fxpt_gain_t fx) -{ - return (int)((fx+(1<<(U2_FPG_RP-1)))>>U2_FPG_RP); -} - -#endif /* INCLUDED_USRP2_TYPES_H */ diff --git a/firmware/microblaze/include/vrt/bits.h b/firmware/microblaze/include/vrt/bits.h deleted file mode 100644 index 54eeec7b4..000000000 --- a/firmware/microblaze/include/vrt/bits.h +++ /dev/null @@ -1,92 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_VRT_BITS_H -#define INCLUDED_VRT_BITS_H - -#include <stdint.h> - - -/* VRT Header bits */ - -#define VRTH_PT_MASK (0xf << 28) -#define VRTH_PT_IF_DATA_NO_SID (0x0 << 28) // IF-Data, no stream id -#define VRTH_PT_IF_DATA_WITH_SID (0x1 << 28) // IF-Data, w/ stream id -#define VRTH_PT_EXT_DATA_NO_SID (0x2 << 28) -#define VRTH_PT_EXT_DATA_WITH_SID (0x3 << 28) -#define VRTH_PT_IF_CONTEXT (0x4 << 28) -#define VRTH_PT_EXT_CONTEXT (0x5 << 28) - -#define VRTH_HAS_CLASSID (1 << 27) -#define VRTH_HAS_TRAILER (1 << 26) // Data pkts only -#define VRTH_START_OF_BURST (1 << 25) // Data (Tx) pkts only -#define VRTH_END_OF_BURST (1 << 24) // Data (Tx) pkts only -#define VRTH_TSM (1 << 24) // Context pkts only - -#define VRTH_TSI_MASK (0x3 << 22) -#define VRTH_TSI_NONE (0x0 << 22) -#define VRTH_TSI_UTC (0x1 << 22) -#define VRTH_TSI_GPS (0x2 << 22) -#define VRTH_TSI_OTHER (0x3 << 22) - -#define VRTH_TSF_MASK (0x3 << 20) -#define VRTH_TSF_NONE (0x0 << 20) -#define VRTH_TSF_SAMPLE_CNT (0x1 << 20) -#define VRTH_TSF_REAL_TIME_PS (0x2 << 20) -#define VRTH_TSF_FREE_RUNNING (0x3 << 20) - -#define VRTH_PKT_CNT_SHIFT 16 -#define VRTH_PKT_CNT_MASK (0xf << 16) - -#define VRTH_PKT_SIZE_MASK 0xffff - - -static inline int -vrth_pkt_cnt(uint32_t h) -{ - return (h & VRTH_PKT_CNT_MASK) >> 16; -} - -static inline int -vrth_pkt_size(uint32_t h) -{ - return h & VRTH_PKT_SIZE_MASK; -} - -/* - * Trailer bits - */ -#define TR_E (1 << 8) - -#define TR_ENABLE(x) ((x) << 20) -#define TR_STATE(x) ((x) << 8) - -// Use these with TR_ENABLE and TR_STATE -#define TR_CAL_TIME (1 << 11) -#define TR_VALID_DATA (1 << 10) -#define TR_REF_LOCK (1 << 9) -#define TR_AGC (1 << 8) -#define TR_DETECTED_SIG (1 << 7) -#define TR_SPECTRAL_INVERSION (1 << 6) -#define TR_OVER_RANGE (1 << 5) -#define TR_SAMPLE_LOSS (1 << 4) -#define TR_USER_3 (1 << 3) -#define TR_USER_2 (1 << 2) -#define TR_USER_1 (1 << 1) -#define TR_USER_0 (1 << 0) - -#endif /* INCLUDED_VRT_BITS_H */ diff --git a/firmware/microblaze/include/vrt/types.h b/firmware/microblaze/include/vrt/types.h deleted file mode 100644 index edfa4ec37..000000000 --- a/firmware/microblaze/include/vrt/types.h +++ /dev/null @@ -1,138 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef INCLUDED_VRT_TYPES_H -#define INCLUDED_VRT_TYPES_H - -#include <stdint.h> - -/* macros for dealing with fixed point numbers */ -#define _FXPT_C(_type, _x, _rp) ((_type)((_x)*(1ll << _rp))) -#define _FXPT_TO_INT(_x, _one) (((_x) + ((_one)/2))/(_one)) -#define _FXPT_TO_DOUBLE(_x, _one) ((double)(_x) * (1.0/(_one))) - -/*********************************************************************** - * The VRT Altitude Type (meters) - **********************************************************************/ -typedef int32_t vrt_altitude_t; -#define VRT_ALTITUDE_RP 5 -#define VRT_ALTITUDE_C(_x) _FXPT_C(vrt_altitude_t, _x, VRT_ALTITUDE_RP) - -static inline vrt_altitude_t -double_to_vrt_altitude(double num){ - return VRT_ALTITUDE_C(num); -} - -static inline int32_t -vrt_altitude_round_to_int(vrt_altitude_t fx){ - return _FXPT_TO_INT(fx, VRT_ALTITUDE_C(1)); -} - -static inline double -vrt_altitude_to_double(vrt_altitude_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_ALTITUDE_C(1)); -} - -/*********************************************************************** - * The VRT Geolocation Angle Type (degrees) - **********************************************************************/ -typedef int32_t vrt_geo_angle_t; -#define VRT_GEO_ANGLE_RP 22 -#define VRT_GEO_ANGLE_C(_x) _FXPT_C(vrt_geo_angle_t, _x, VRT_GEO_ANGLE_RP) - -static inline vrt_geo_angle_t -double_to_vrt_geo_angle(double num){ - return VRT_GEO_ANGLE_C(num); -} - -static inline int16_t -vrt_geo_angle_round_to_int(vrt_geo_angle_t fx){ - return _FXPT_TO_INT(fx, VRT_GEO_ANGLE_C(1)); -} - -static inline double -vrt_geo_angle_to_double(vrt_geo_angle_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_GEO_ANGLE_C(1)); -} - -/*********************************************************************** - * The VRT Frequency Type (Hz) - **********************************************************************/ -typedef int64_t vrt_freq_t; -#define VRT_FREQ_RP 20 -#define VRT_FREQ_C(_x) _FXPT_C(vrt_freq_t, _x, VRT_FREQ_RP) - -static inline vrt_freq_t -double_to_vrt_freq(double num){ - return VRT_FREQ_C(num); -} - -static inline int64_t -vrt_freq_round_to_int(vrt_freq_t fx){ - return _FXPT_TO_INT(fx, VRT_FREQ_C(1)); -} - -static inline double -vrt_freq_to_double(vrt_freq_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_FREQ_C(1)); -} - -/*********************************************************************** - * The VRT Gain Type (dB) - **********************************************************************/ -typedef int16_t vrt_gain_t; -#define VRT_GAIN_RP 7 -#define VRT_GAIN_C(_x) _FXPT_C(vrt_gain_t, _x, VRT_GAIN_RP) - -static inline vrt_gain_t -double_to_vrt_gain(double num){ - return VRT_GAIN_C(num); -} - -static inline int16_t -vrt_gain_round_to_int(vrt_gain_t fx){ - return _FXPT_TO_INT(fx, VRT_GAIN_C(1)); -} - -static inline double -vrt_gain_to_double(vrt_gain_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_GAIN_C(1)); -} - -/*********************************************************************** - * The VRT Temperature Type (Celcius) - **********************************************************************/ -typedef int16_t vrt_temp_t; -#define VRT_TEMP_RP 6 -#define VRT_TEMP_C(_x) _FXPT_C(vrt_temp_t, _x, VRT_TEMP_RP) - -static inline vrt_temp_t -double_to_vrt_temp(double num){ - return VRT_TEMP_C(num); -} - -static inline int16_t -vrt_temp_round_to_int(vrt_temp_t fx){ - return _FXPT_TO_INT(fx, VRT_TEMP_C(1)); -} - -static inline double -vrt_temp_to_double(vrt_temp_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_TEMP_C(1)); -} - -#endif /* INCLUDED_VRT_TYPES_H */ diff --git a/firmware/microblaze/lib/.gitignore b/firmware/microblaze/lib/.gitignore deleted file mode 100644 index 5d838bf6c..000000000 --- a/firmware/microblaze/lib/.gitignore +++ /dev/null @@ -1,40 +0,0 @@ -*~ -/*-stamp -/*.a -/*.bin -/*.dump -/*.log -/*.rom -/.deps -/Makefile -/Makefile.in -/aclocal.m4 -/autom4te.cache -/blink_leds -/blink_leds2 -/build -/compile -/config.h -/config.h.in -/config.log -/config.status -/configure -/depcomp -/eth_test -/gen_eth_packets -/ibs_rx_test -/ibs_tx_test -/install-sh -/libtool -/ltmain.sh -/missing -/py-compile -/rcv_eth_packets -/run_tests.sh -/stamp-h1 -/test1 -/test_phy_comm -/timer_test -/buf_ram_test -/buf_ram_zero -/hello diff --git a/firmware/microblaze/lib/Makefile.am b/firmware/microblaze/lib/Makefile.am deleted file mode 100644 index b51d74463..000000000 --- a/firmware/microblaze/lib/Makefile.am +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -include $(top_srcdir)/Makefile.common - -noinst_LIBRARIES = \ - libu2fw.a - -libu2fw_a_SOURCES = \ - abort.c \ - ad9510.c \ - bsm12.c \ - buffer_pool.c \ - clocks.c \ - dbsm.c \ - eeprom.c \ - ethernet.c \ - eth_mac.c \ - _exit.c \ - exit.c \ - hal_io.c \ - hal_uart.c \ - i2c.c \ - mdelay.c \ - memcpy_wa.c \ - memset_wa.c \ - nonstdio.c \ - pic.c \ - print_mac_addr.c \ - print_rmon_regs.c \ - print_buffer.c \ - printf.c \ - sd.c \ - spi.c \ - u2_init.c \ - net_common.c \ - arp_cache.c \ - banal.c - -noinst_HEADERS = \ - ad9510.h \ - bsm12.h \ - buffer_pool.h \ - clocks.h \ - dbsm.h \ - eth_mac.h \ - eth_mac_regs.h \ - eth_phy.h \ - ethernet.h \ - hal_io.h \ - hal_uart.h \ - i2c.h \ - mdelay.h \ - memcpy_wa.h \ - memory_map.h \ - memset_wa.h \ - nonstdio.h \ - pic.h \ - print_rmon_regs.h \ - sd.h \ - spi.h \ - stdint.h \ - stdio.h \ - u2_init.h \ - usrp2_bytesex.h \ - wb16550.h \ - net_common.h \ - if_arp.h \ - arp_cache.h \ - banal.h \ - ethertype.h diff --git a/firmware/microblaze/lib/clocks.c b/firmware/microblaze/lib/clocks.c deleted file mode 100644 index ccc4a7cc7..000000000 --- a/firmware/microblaze/lib/clocks.c +++ /dev/null @@ -1,239 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include <clocks.h> - -#include "memory_map.h" -#include "ad9510.h" -#include "spi.h" -#include "u2_init.h" -#include "nonstdio.h" - -void -clocks_init(void) -{ - // Set up basic clocking functions in AD9510 - ad9510_write_reg(0x45, 0x00); // CLK2 drives distribution - - clocks_enable_fpga_clk(true, 1); - - spi_wait(); - - // Set up PLL for 10 MHz reference - // Reg 4, A counter, Don't Care - ad9510_write_reg(0x05, 0x00); // Reg 5, B counter MSBs, 0 - ad9510_write_reg(0x06, 0x05); // Reg 6, B counter LSBs, 5 - // Reg 7, Loss of reference detect, doesn't work yet, 0 - ad9510_write_reg(0x5A, 0x01); // Update Regs - - // Primary clock configuration - clocks_mimo_config(MC_WE_DONT_LOCK); - - // Set up other clocks - //clocks_enable_test_clk(false, 0); - //clocks_enable_tx_dboard(false, 0); - //clocks_enable_rx_dboard(false, 0); - clocks_enable_eth_phyclk(false, 0); - - // Enable clock to ADCs and DACs - //clocks_enable_dac_clk(true, 1); - //clocks_enable_adc_clk(true, 1); -} - - -void -clocks_mimo_config(int flags) -{ - if (flags & _MC_WE_LOCK){ - // Reg 8, Charge pump on, dig lock det, positive PFD, 47 - ad9510_write_reg(0x08, 0x47); - } - else { - // Reg 8, Charge pump off, dig lock det, positive PFD - ad9510_write_reg(0x08, 0x00); - } - - // Reg 9, Charge pump current, 0x40=3mA, 0x00=650uA - ad9510_write_reg(0x09, 0x00); - // Reg A, Prescaler of 2, everything normal 04 - ad9510_write_reg(0x0A, 0x04); - // Reg B, R Div MSBs, 0 - ad9510_write_reg(0x0B, 0x00); - // Reg C, R Div LSBs, 1 - ad9510_write_reg(0x0C, 0x01); - // Reg D, Antibacklash, Digital lock det, 0 - - ad9510_write_reg(0x5A, 0x01); // Update Regs - - spi_wait(); - - // Allow for clock switchover - - if (flags & _MC_WE_LOCK){ // WE LOCK - if (flags & _MC_MIMO_CLK_INPUT) { - // Turn on ref output and choose the MIMO connector - output_regs->clk_ctrl = 0x15; - } - else { - // turn on ref output and choose the SMA - output_regs->clk_ctrl = 0x1C; - } - } - else { // WE DONT LOCK - // Disable both ext clk inputs - output_regs->clk_ctrl = 0x10; - } - - // Do we drive a clock onto the MIMO connector? - if (flags & MC_PROVIDE_CLK_TO_MIMO) - clocks_enable_clkexp_out(true,10); - else - clocks_enable_clkexp_out(false,0); -} - -bool -clocks_lock_detect() -{ - if(pic_regs->pending & PIC_CLKSTATUS) - return true; - return false; -} - -int inline -clocks_gen_div(int divisor) -{ - int L,H; - L = (divisor>>1)-1; - H = divisor-L-2; - return (L<<4)|H; -} - -#define CLOCK_OUT_EN 0x08 -#define CLOCK_OUT_DIS_CMOS 0x01 -#define CLOCK_OUT_DIS_PECL 0x02 -#define CLOCK_DIV_DIS 0x80 -#define CLOCK_DIV_EN 0x00 - -#define CLOCK_MODE_PECL 1 -#define CLOCK_MODE_LVDS 2 -#define CLOCK_MODE_CMOS 3 - -void -clocks_enable_XXX_clk(bool enable, int divisor, int reg_en, int reg_div, int mode) -{ - int enable_word, div_word, div_en_word; - - switch(mode) { - case CLOCK_MODE_PECL : - enable_word = enable ? 0x08 : 0x0A; - break; - case CLOCK_MODE_LVDS : - enable_word = enable ? 0x02 : 0x03; - break; - case CLOCK_MODE_CMOS : - enable_word = enable ? 0x08 : 0x09; - break; - } - if(enable && (divisor>1)) { - div_word = clocks_gen_div(divisor); - div_en_word = CLOCK_DIV_EN; - } - else { - div_word = 0; - div_en_word = CLOCK_DIV_DIS; - } - - ad9510_write_reg(reg_en,enable_word); // Output en/dis - ad9510_write_reg(reg_div,div_word); // Set divisor - ad9510_write_reg(reg_div+1,div_en_word); // Enable or Bypass Divider - ad9510_write_reg(0x5A, 0x01); // Update Regs -} - -// Clock 0 -/*void -clocks_enable_test_clk(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x3C,0x48,CLOCK_MODE_PECL); -}*/ - -// Clock 1 -void -clocks_enable_fpga_clk(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x3D,0x4A,CLOCK_MODE_PECL); -} - -// Clock 2 on Rev 3, Clock 5 on Rev 4 -void -clocks_enable_clkexp_out(bool enable, int divisor) -{ - if(u2_hw_rev_major == 3) - clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); - else if(u2_hw_rev_major == 4) { - ad9510_write_reg(0x34,0x00); // Turn on fine delay - ad9510_write_reg(0x35,0x00); // Set Full Scale to nearly 10ns - ad9510_write_reg(0x36,0x1c); // Set fine delay. 0x20 is midscale - clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); - - } - else - putstr("ERR: Invalid Rev\n"); -} - -// Clock 5 on Rev 3, none (was 2) on Rev 4 -void -clocks_enable_eth_phyclk(bool enable, int divisor) -{ - if(u2_hw_rev_major == 3) - clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); - else if(u2_hw_rev_major == 4) - clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); - else - putstr("ERR: Invalid Rev\n"); -} - -// Clock 3 -/*void -clocks_enable_dac_clk(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x3F,0x4E,CLOCK_MODE_PECL); -}*/ - -// Clock 4 -/*void -clocks_enable_adc_clk(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x40,0x50,CLOCK_MODE_LVDS); -}*/ - -// Clock 6 -/*void -clocks_enable_tx_dboard(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x42,0x54,CLOCK_MODE_CMOS); -}*/ - -// Clock 7 -/*void -clocks_enable_rx_dboard(bool enable, int divisor) -{ - clocks_enable_XXX_clk(enable,divisor,0x43,0x56,CLOCK_MODE_CMOS); -}*/ diff --git a/firmware/microblaze/lib/memory_map.h b/firmware/microblaze/lib/memory_map.h deleted file mode 100644 index cdf3dd338..000000000 --- a/firmware/microblaze/lib/memory_map.h +++ /dev/null @@ -1,792 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* Overall Memory Map - * 0000-7FFF 32K RAM space (16K on 1500, 24K on 2000, 32K on DSP) - * 8000-BFFF 16K Buffer Pool - * C000-FFFF 16K Peripherals - */ - - -#ifndef INCLUDED_MEMORY_MAP_H -#define INCLUDED_MEMORY_MAP_H - -#include <stdint.h> - - -#define MASTER_CLK_RATE 100000000 // 100 MHz - - -//////////////////////////////////////////////////////////////// -// -// Memory map for embedded wishbone bus -// -//////////////////////////////////////////////////////////////// - - -//////////////////////////////////////////////////////////////// -// Main RAM, Slave 0 - -#define RAM_BASE 0x0000 - -//////////////////////////////////////////////////////////////// -// Buffer Pool RAM, Slave 1 -// -// The buffers themselves are located in Slave 1, Buffer Pool RAM. -// The status registers are in Slave 5, Buffer Pool Status. -// The control register is in Slave 7, Settings Bus. - -#define BUFFER_POOL_RAM_BASE 0x8000 - -#define NBUFFERS 8 -#define BP_NLINES 0x0200 // number of 32-bit lines in a buffer -#define BP_LAST_LINE (BP_NLINES - 1) // last line in a buffer - -#define buffer_pool_ram \ - ((uint32_t *) BUFFER_POOL_RAM_BASE) - -#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES]) - - -///////////////////////////////////////////////////// -// SPI Core, Slave 2. See core docs for more info -#define SPI_BASE 0xC000 // Base address (16-bit) - -typedef struct { - volatile uint32_t txrx0; - volatile uint32_t txrx1; - volatile uint32_t txrx2; - volatile uint32_t txrx3; - volatile uint32_t ctrl; - volatile uint32_t div; - volatile uint32_t ss; -} spi_regs_t; - -#define spi_regs ((spi_regs_t *) SPI_BASE) - - -// Masks for controlling different peripherals -#define SPI_SS_AD9510 1 -#define SPI_SS_AD9777 2 -#define SPI_SS_RX_DAC 4 -#define SPI_SS_RX_ADC 8 -#define SPI_SS_RX_DB 16 -#define SPI_SS_TX_DAC 32 -#define SPI_SS_TX_ADC 64 -#define SPI_SS_TX_DB 128 - -// Masks for different parts of CTRL reg -#define SPI_CTRL_ASS (1<<13) -#define SPI_CTRL_IE (1<<12) -#define SPI_CTRL_LSB (1<<11) -#define SPI_CTRL_TXNEG (1<<10) -#define SPI_CTRL_RXNEG (1<< 9) -#define SPI_CTRL_GO_BSY (1<< 8) -#define SPI_CTRL_CHAR_LEN_MASK 0x7F - -//////////////////////////////////////////////// -// I2C, Slave 3 -// See Wishbone I2C-Master Core Specification. - -#define I2C_BASE 0xC400 - -typedef struct { - volatile uint32_t prescaler_lo; // r/w - volatile uint32_t prescaler_hi; // r/w - volatile uint32_t ctrl; // r/w - volatile uint32_t data; // wr = transmit reg; rd = receive reg - volatile uint32_t cmd_status; // wr = command reg; rd = status reg -} i2c_regs_t; - -#define i2c_regs ((i2c_regs_t *) I2C_BASE) - -#define I2C_CTRL_EN (1 << 7) // core enable -#define I2C_CTRL_IE (1 << 6) // interrupt enable - -// -// STA, STO, RD, WR, and IACK bits are cleared automatically -// -#define I2C_CMD_START (1 << 7) // generate (repeated) start condition -#define I2C_CMD_STOP (1 << 6) // generate stop condition -#define I2C_CMD_RD (1 << 5) // read from slave -#define I2C_CMD_WR (1 << 4) // write to slave -#define I2C_CMD_NACK (1 << 3) // when a rcvr, send ACK (ACK=0) or NACK (ACK=1) -#define I2C_CMD_RSVD_2 (1 << 2) // reserved -#define I2C_CMD_RSVD_1 (1 << 1) // reserved -#define I2C_CMD_IACK (1 << 0) // set to clear pending interrupt - -#define I2C_ST_RXACK (1 << 7) // Received acknowledgement from slave (1 = NAK, 0 = ACK) -#define I2C_ST_BUSY (1 << 6) // 1 after START signal detected; 0 after STOP signal detected -#define I2C_ST_AL (1 << 5) // Arbitration lost. 1 when core lost arbitration -#define I2C_ST_RSVD_4 (1 << 4) // reserved -#define I2C_ST_RSVD_3 (1 << 3) // reserved -#define I2C_ST_RSVD_2 (1 << 2) // reserved -#define I2C_ST_TIP (1 << 1) // Transfer-in-progress -#define I2C_ST_IP (1 << 0) // Interrupt pending - - -//////////////////////////////////////////////// -// GPIO, Slave 4 -// -// These go to the daughterboard i/o pins - -#define GPIO_BASE 0xC800 - -typedef struct { - volatile uint32_t io; // tx data in high 16, rx in low 16 - volatile uint32_t ddr; // 32 bits, 1 means output. tx in high 16, rx in low 16 - volatile uint32_t tx_sel; // 16 2-bit fields select which source goes to TX DB - volatile uint32_t rx_sel; // 16 2-bit fields select which source goes to RX DB -} gpio_regs_t; - -// each 2-bit sel field is layed out this way -#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg -#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic -#define GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric -#define GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric - -#define gpio_base ((gpio_regs_t *) GPIO_BASE) - -/////////////////////////////////////////////////// -// Buffer Pool Status, Slave 5 -// -// The buffers themselves are located in Slave 1, Buffer Pool RAM. -// The status registers are in Slave 5, Buffer Pool Status. -// The control register is in Slave 7, Settings Bus. - -#define BUFFER_POOL_STATUS_BASE 0xCC00 - -typedef struct { - volatile uint32_t last_line[NBUFFERS]; // last line xfer'd in buffer - volatile uint32_t status; // error and done flags - volatile uint32_t hw_config; // see below - volatile uint32_t dummy[3]; - volatile uint32_t irqs; - volatile uint32_t pri_enc_bp_status; - volatile uint32_t cycle_count; -} buffer_pool_status_t; - -#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE) - -/* - * Buffer n's xfer is done. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_DONE(n) (0x00000001 << (n)) -#define BPS_DONE_0 BPS_DONE(0) -#define BPS_DONE_1 BPS_DONE(1) -#define BPS_DONE_2 BPS_DONE(2) -#define BPS_DONE_3 BPS_DONE(3) -#define BPS_DONE_4 BPS_DONE(4) -#define BPS_DONE_5 BPS_DONE(5) -#define BPS_DONE_6 BPS_DONE(6) -#define BPS_DONE_7 BPS_DONE(7) - -/* - * Buffer n's xfer had an error. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_ERROR(n) (0x00000100 << (n)) -#define BPS_ERROR_0 BPS_ERROR(0) -#define BPS_ERROR_1 BPS_ERROR(1) -#define BPS_ERROR_2 BPS_ERROR(2) -#define BPS_ERROR_3 BPS_ERROR(3) -#define BPS_ERROR_4 BPS_ERROR(4) -#define BPS_ERROR_5 BPS_ERROR(5) -#define BPS_ERROR_6 BPS_ERROR(6) -#define BPS_ERROR_7 BPS_ERROR(7) - -/* - * Buffer n is idle. A buffer is idle if it's not - * DONE, ERROR, or processing a transaction. If it's - * IDLE, it's safe to start a new transaction. - * - * Clear this bit by starting a xfer with - * bp_send_from_buf or bp_receive_to_buf. - */ -#define BPS_IDLE(n) (0x00010000 << (n)) -#define BPS_IDLE_0 BPS_IDLE(0) -#define BPS_IDLE_1 BPS_IDLE(1) -#define BPS_IDLE_2 BPS_IDLE(2) -#define BPS_IDLE_3 BPS_IDLE(3) -#define BPS_IDLE_4 BPS_IDLE(4) -#define BPS_IDLE_5 BPS_IDLE(5) -#define BPS_IDLE_6 BPS_IDLE(6) -#define BPS_IDLE_7 BPS_IDLE(7) - -/* - * Buffer n has a "slow path" packet in it. - * This bit is orthogonal to the bits above and indicates that - * the FPGA ethernet rx protocol engine has identified this packet - * as one requiring firmware intervention. - */ -#define BPS_SLOWPATH(n) (0x01000000 << (n)) -#define BPS_SLOWPATH_0 BPS_SLOWPATH(0) -#define BPS_SLOWPATH_1 BPS_SLOWPATH(1) -#define BPS_SLOWPATH_2 BPS_SLOWPATH(2) -#define BPS_SLOWPATH_3 BPS_SLOWPATH(3) -#define BPS_SLOWPATH_4 BPS_SLOWPATH(4) -#define BPS_SLOWPATH_5 BPS_SLOWPATH(5) -#define BPS_SLOWPATH_6 BPS_SLOWPATH(6) -#define BPS_SLOWPATH_7 BPS_SLOWPATH(7) - - -#define BPS_DONE_ALL 0x000000ff // mask of all dones -#define BPS_ERROR_ALL 0x0000ff00 // mask of all errors -#define BPS_IDLE_ALL 0x00ff0000 // mask of all idles -#define BPS_SLOWPATH_ALL 0xff000000 // mask of all slowpaths - -// The hw_config register - -#define HWC_SIMULATION 0x80000000 -#define HWC_WB_CLK_DIV_MASK 0x0000000f - -/*! - * \brief return non-zero if we're running under the simulator - */ -inline static int -hwconfig_simulation_p(void) -{ - return buffer_pool_status->hw_config & HWC_SIMULATION; -} - -/*! - * \brief Return Wishbone Clock divisor. - * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor. - */ -inline static int -hwconfig_wishbone_divisor(void) -{ - return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK; -} - -/////////////////////////////////////////////////// -// Ethernet Core, Slave 6 - -#define ETH_BASE 0xD000 - -#include "eth_mac_regs.h" - -#define eth_mac ((eth_mac_regs_t *) ETH_BASE) - -//////////////////////////////////////////////////// -// Settings Bus, Slave #7, Not Byte Addressable! -// -// Output-only from processor point-of-view. -// 1KB of address space (== 256 32-bit write-only regs) - - -#define MISC_OUTPUT_BASE 0xD400 -#define TX_PROTOCOL_ENGINE_BASE 0xD480 -#define RX_PROTOCOL_ENGINE_BASE 0xD4C0 -#define BUFFER_POOL_CTRL_BASE 0xD500 -#define LAST_SETTING_REG 0xD7FC // last valid setting register - -#define SR_MISC 0 -#define SR_TX_PROT_ENG 32 -#define SR_RX_PROT_ENG 48 -#define SR_BUFFER_POOL_CTRL 64 -#define SR_UDP_SM 96 -#define SR_TX_DSP 208 -#define SR_TX_CTRL 224 -#define SR_RX_DSP 160 -#define SR_RX_CTRL 176 -#define SR_TIME64 192 -#define SR_SIMTIMER 198 -#define SR_LAST 255 - -#define _SR_ADDR(sr) (MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t)) - -// --- buffer pool control regs --- - -typedef struct { - volatile uint32_t ctrl; -} buffer_pool_ctrl_t; - -// buffer pool ports - -#define PORT_SERDES 0 // serial/deserializer -#define PORT_DSP 1 // DSP tx or rx pipeline -#define PORT_ETH 2 // ethernet tx or rx -#define PORT_RAM 3 // RAM tx or rx - -// the buffer pool ctrl register fields - -#define BPC_BUFFER(n) (((n) & 0xf) << 28) -#define BPC_BUFFER_MASK BPC_BUFFER(~0) -#define BPC_BUFFER_0 BPC_BUFFER(0) -#define BPC_BUFFER_1 BPC_BUFFER(1) -#define BPC_BUFFER_2 BPC_BUFFER(2) -#define BPC_BUFFER_3 BPC_BUFFER(3) -#define BPC_BUFFER_4 BPC_BUFFER(4) -#define BPC_BUFFER_5 BPC_BUFFER(5) -#define BPC_BUFFER_6 BPC_BUFFER(6) -#define BPC_BUFFER_7 BPC_BUFFER(7) -#define BPC_BUFFER_NIL BPC_BUFFER(0x8) // disable - -#define BPC_PORT(n) (((n) & 0x7) << 25) -#define BPC_PORT_MASK BPC_PORT(~0) -#define BPC_PORT_SERDES BPC_PORT(PORT_SERDES) -#define BPC_PORT_DSP BPC_PORT(PORT_DSP) -#define BPC_PORT_ETH BPC_PORT(PORT_ETH) -#define BPC_PORT_RAM BPC_PORT(PORT_RAM) -#define BPC_PORT_NIL BPC_PORT(0x4) // disable - -#define BPC_CLR (1 << 24) // mutually excl commands -#define BPC_READ (1 << 23) -#define BPC_WRITE (1 << 22) - -#define BPC_STEP(step) (((step) & 0xf) << 18) -#define BPC_STEP_MASK BPC_STEP(~0) -#define BPC_LAST_LINE(line) (((line) & 0x1ff) << 9) -#define BPC_LAST_LINE_MASK BPC_LAST_LINE(~0) -#define BPC_FIRST_LINE(line) (((line) & 0x1ff) << 0) -#define BPC_FIRST_LINE_MASK BPC_FIRST_LINE(~0) - -#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE) - -// --- misc outputs --- - -typedef struct { - volatile uint32_t clk_ctrl; - volatile uint32_t serdes_ctrl; - volatile uint32_t adc_ctrl; - volatile uint32_t leds; - volatile uint32_t phy_ctrl; // LSB is reset line to eth phy - volatile uint32_t debug_mux_ctrl; - volatile uint32_t ram_page; // FIXME should go somewhere else... - volatile uint32_t flush_icache; // Flush the icache - volatile uint32_t led_src; // HW or SW control for LEDs -} output_regs_t; - -#define SERDES_ENABLE 8 -#define SERDES_PRBSEN 4 -#define SERDES_LOOPEN 2 -#define SERDES_RXEN 1 - -#define ADC_CTRL_ON 0x0F -#define ADC_CTRL_OFF 0x00 - -// crazy order that matches the labels on the case - -#define LED_A (1 << 4) -#define LED_B (1 << 1) -#define LED_C (1 << 3) -#define LED_D (1 << 0) -#define LED_E (1 << 2) -// LED_F // controlled by CPLD -#define LED_RJ45 (1 << 5) - -#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE) - -// --- udp tx regs --- - -typedef struct { - // Bits 19:16 are control info; bits 15:0 are data (see below) - // First two words are unused. - volatile uint32_t _nope[2]; - //--- ethernet header - 14 bytes--- - volatile struct{ - uint32_t mac_dst_0_1; //word 2 - uint32_t mac_dst_2_3; - uint32_t mac_dst_4_5; - uint32_t mac_src_0_1; - uint32_t mac_src_2_3; - uint32_t mac_src_4_5; - uint32_t ether_type; //word 8 - } eth_hdr; - //--- ip header - 20 bytes --- - volatile struct{ - uint32_t ver_ihl_tos; //word 9 - uint32_t total_length; - uint32_t identification; - uint32_t flags_frag_off; - uint32_t ttl_proto; - uint32_t checksum; - uint32_t src_addr_high; - uint32_t src_addr_low; - uint32_t dst_addr_high; - uint32_t dst_addr_low; //word 18 - } ip_hdr; - //--- udp header - 8 bytes --- - volatile struct{ - uint32_t src_port; //word 19 - uint32_t dst_port; - uint32_t length; - uint32_t checksum; //word 22 - } udp_hdr; - volatile uint32_t _pad[32-23]; -} sr_udp_sm_t; - -// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive) - -// This is the last word of the header -#define UDP_SM_LAST_WORD (1 << 19) - -// Insert IP header checksum here. Data is the xor of 16'hFFFF and -// the values written into regs 9-13 and 15-18. -#define UDP_SM_INS_IP_HDR_CHKSUM (1 << 18) - -// Insert IP Length here (data ignored) -#define UDP_SM_INS_IP_LEN (1 << 17) - -// Insert UDP Length here (data ignore) -#define UDP_SM_INS_UDP_LEN (1 << 16) - -#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) - -// --- dsp tx regs --- - -#define MIN_CIC_INTERP 1 -#define MAX_CIC_INTERP 128 - -typedef struct { - volatile uint32_t num_chan; - volatile uint32_t clear_state; // clears out state machine, fifos, -} sr_tx_ctrl_t; - -#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) - -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t interp_rate; - volatile uint32_t _padding0; // padding for the tx_mux - // NOT freq, scale, interp - /*! - * \brief output mux configuration. - * - * <pre> - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------------------------------+-------+-------+-------+-------+ - * | | DAC1 | DAC0 | - * +-------------------------------+-------+-------+-------+-------+ - * - * There are N DUCs (1 now) with complex inputs and outputs. - * There are two DACs. - * - * Each 4-bit DACx field specifies the source for the DAC - * Each subfield is coded like this: - * - * 3 2 1 0 - * +-------+ - * | N | - * +-------+ - * - * N specifies which DUC output is connected to this DAC. - * - * N which interp output - * --- ------------------- - * 0 DUC 0 I - * 1 DUC 0 Q - * 2 DUC 1 I - * 3 DUC 1 Q - * F All Zeros - * - * The default value is 0x10 - * </pre> - */ - volatile uint32_t tx_mux; - -} dsp_tx_regs_t; - -#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) - -// --- VITA RX CTRL regs --- -typedef struct { - // The following 3 are logically a single command register. - // They are clocked into the underlying fifo when time_ticks is written. - volatile uint32_t cmd; // {now, chain, num_samples(30) - volatile uint32_t time_secs; - volatile uint32_t time_ticks; - - volatile uint32_t clear_overrun; // write anything to clear overrun - volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter - volatile uint32_t vrt_stream_id; // word 1 of packet. - volatile uint32_t vrt_trailer; - volatile uint32_t nsamples_per_pkt; - volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources - volatile uint32_t pad[7]; // Make each structure 16 elements long -} sr_rx_ctrl_t; - -#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) - -// --- dsp rx regs --- -#define MIN_CIC_DECIM 1 -#define MAX_CIC_DECIM 128 - -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t decim_rate; - volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, - // otherwise it is automatic - volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits - - /*! - * \brief input mux configuration. - * - * This determines which ADC (or constant zero) is connected to - * each DDC input. There are N DDCs (1 now). Each has two inputs. - * - * <pre> - * Mux value: - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | |Q0 |I0 | - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero) - * - * The default value is 0x4 - * </pre> - */ - volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v - - /*! - * \brief Streaming GPIO configuration - * - * This determines whether the LSBs of I and Q samples come from the DSP - * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first - * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] - * configured as inputs. The GPIO pins will be sampled at the time the - * remainder of the DSP sample is strobed into the RX sample FIFO. There - * will be a decimation-dependent fixed time offset between the GPIO - * sample stream and the associated RF samples. - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | MBZ |Q|I| - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * I 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[15] - * - * Q 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[14] - */ - volatile uint32_t gpio_stream_enable; - -} dsp_rx_regs_t; - -#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) - -// ---------------------------------------------------------------- -// VITA49 64 bit time (write only) - /*! - * \brief Time 64 flags - * - * <pre> - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-----------------------------------------------------------+-+-+ - * | |S|P| - * +-----------------------------------------------------------+-+-+ - * - * P - PPS edge selection (0=negedge, 1=posedge, default=0) - * S - Source (0=sma, 1=mimo, 0=default) - * - * </pre> - */ -typedef struct { - volatile uint32_t secs; // value to set absolute secs to on next PPS - volatile uint32_t ticks; // value to set absolute ticks to on next PPS - volatile uint32_t flags; // flags - see chart above - volatile uint32_t imm; // set immediate (0=latch on next pps, 1=latch immediate, default=0) -} sr_time64_t; - -#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64)) - - -/* - * --- ethernet tx protocol engine regs (write only) --- - * - * These registers control the transmit portion of the ethernet - * protocol engine (out of USRP2). The protocol engine handles fifo - * status and sequence number insertion in outgoing packets, and - * automagically generates status packets when required to inform the - * host of changes in fifo availability. - * - * All outgoing packets have their fifo_status field set to the number - * of 32-bit lines of fifo available in the ethernet Rx fifo (see - * usrp2_eth_packet.h). Seqno's are set if FIXME, else 0. - * - * FIXME clean this up once we know how it's supposed to behave. - */ - -typedef struct { - volatile uint32_t flags; // not yet fully defined (channel?) - volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr - volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr - volatile uint32_t mac_src2345; // 4 bytes of destination mac addr - volatile uint32_t seqno; // Write to init seqno. It autoincs on match -} tx_proto_engine_regs_t; - -#define tx_proto_engine ((tx_proto_engine_regs_t *) TX_PROTOCOL_ENGINE_BASE) - -/* - * --- ethernet rx protocol engine regs (write only) --- - * - * These registers control the receive portion of the ethernet - * protocol engine (into USRP2). The protocol engine offloads common - * packet inspection operations so that firmware has less to do on - * "fast path" packets. - * - * The registers define conditions which must be matched for a packet - * to be considered a "fast path" packet. If a received packet - * matches the src and dst mac address, ethertype, flags field, and - * expected seqno number it is considered a "fast path" packet, and - * the expected seqno is updated. If the packet fails to satisfy any - * of the above conditions it's a "slow path" packet, and the - * corresponding SLOWPATH flag will be set buffer_status register. - */ - -typedef struct { - volatile uint32_t flags; // not yet fully defined (channel?) - volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr - volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr - volatile uint32_t mac_src2345; // 4 bytes of destination mac addr - volatile uint32_t ethertype_pad; // ethertype in high 16-bits -} rx_proto_engine_regs_t; - -#define rx_proto_engine ((rx_proto_engine_regs_t *) RX_PROTOCOL_ENGINE_BASE) - - - -/////////////////////////////////////////////////// -// Simple Programmable Interrupt Controller, Slave 8 - -#define PIC_BASE 0xD800 - -// Interrupt request lines -// Bit numbers (LSB == 0) that correpond to interrupts into PIC - -#define IRQ_BUFFER 0 // buffer manager -#define IRQ_ONETIME 1 -#define IRQ_SPI 2 -#define IRQ_I2C 3 -#define IRQ_PHY 4 // ethernet PHY -#define IRQ_UNDERRUN 5 -#define IRQ_OVERRUN 6 -#define IRQ_PPS 7 // pulse per second -#define IRQ_UART_RX 8 -#define IRQ_UART_TX 9 -#define IRQ_SERDES 10 -#define IRQ_CLKSTATUS 11 -#define IRQ_PERIODIC 12 - -#define IRQ_TO_MASK(x) (1 << (x)) - -#define PIC_BUFFER_INT IRQ_TO_MASK(IRQ_BUFFER) -#define PIC_ONETIME_INT IRQ_TO_MASK(IRQ_ONETIME) -#define PIC_SPI_INT IRQ_TO_MASK(IRQ_SPI) -#define PIC_I2C_INT IRQ_TO_MASK(IRQ_I2C) -#define PIC_PHY_INT IRQ_TO_MASK(IRQ_PHY) -#define PIC_UNDERRUN_INT IRQ_TO_MASK(IRQ_UNDERRUN) -#define PIC_OVERRUN_INT IRQ_TO_MASK(IRQ_OVERRUN) -#define PIC_PPS_INT IRQ_TO_MASK(IRQ_PPS) -#define PIC_UART_RX_INT IRQ_TO_MASK(IRQ_UART_RX) -#define PIC_UART_TX_INT IRQ_TO_MASK(IRQ_UART_TX) -#define PIC_SERDES IRQ_TO_MASK(IRQ_SERDES) -#define PIC_CLKSTATUS IRQ_TO_MASK(IRQ_CLKSTATUS) - -typedef struct { - volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level - volatile uint32_t polarity; // mask: 1 -> rising edge - volatile uint32_t mask; // mask: 1 -> disabled - volatile uint32_t pending; // mask: 1 -> pending; write 1's to clear pending ints -} pic_regs_t; - -#define pic_regs ((pic_regs_t *) PIC_BASE) - -// ---------------------------------------------------------------- -// WB_CLK_RATE is the time base for this -typedef struct { - volatile uint32_t onetime; // Number of wb clk cycles till the onetime interrupt - volatile uint32_t periodic; // Repeat rate of periodic interrupt -} sr_simple_timer_t; - -#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER)) - -/////////////////////////////////////////////////// -// UART, Slave 10 - -#define UART_BASE 0xE000 - -typedef struct { - // All elements are 8 bits except for clkdiv (16), but we use uint32 to make - // the hardware for decoding easier - volatile uint32_t clkdiv; // Set to 50e6 divided by baud rate (no x16 factor) - volatile uint32_t txlevel; // Number of spaces in the FIFO for writes - volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads - volatile uint32_t txchar; // Write characters to be sent here - volatile uint32_t rxchar; // Read received characters here -} uart_regs_t; - -#define uart_regs ((uart_regs_t *) UART_BASE) - -/////////////////////////////////////////////////// -// ATR Controller, Slave 11 - -#define ATR_BASE 0xE400 - -typedef struct { - volatile uint32_t v[16]; -} atr_regs_t; - -#define ATR_IDLE 0x0 // indicies into v -#define ATR_TX 0x1 -#define ATR_RX 0x2 -#define ATR_FULL 0x3 - -#define atr_regs ((atr_regs_t *) ATR_BASE) - -/////////////////////////////////////////////////// -// SD Card SPI interface, Slave 13 -// All regs are 8 bits wide, but are accessed as if they are 32 bits - -#define SDSPI_BASE 0xEC00 - -typedef struct { - volatile uint32_t status; // Write a 1 or 0 for controlling CS - volatile uint32_t clkdiv; - volatile uint32_t send_dat; - volatile uint32_t receive_dat; -} sdspi_regs_t; - -#define sdspi_regs ((sdspi_regs_t *) SDSPI_BASE) - -/////////////////////////////////////////////////// -// External RAM interface, Slave 14 -// Pages are 1K. Page is 10 bits, set by a control register -// output_regs->ram_page - -#define EXTRAM_BASE 0xF000 -#define extram ((volatile uint32_t *) EXTRAM_BASE) - - -/////////////////////////////////////////////////// - -#endif - diff --git a/firmware/microblaze/lib/sd.c b/firmware/microblaze/lib/sd.c deleted file mode 100644 index d000b28ae..000000000 --- a/firmware/microblaze/lib/sd.c +++ /dev/null @@ -1,197 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2008 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "sd.h" -#include "memory_map.h" -#include "stdint.h" -#include "stdio.h" - -static inline void -sd_packarg(unsigned char *argument,unsigned int value) -{ - argument[3] = (unsigned char)(value >> 24); - argument[2] = (unsigned char)(value >> 16); - argument[1] = (unsigned char)(value >> 8); - argument[0] = (unsigned char)(value); -} - -int -sd_init(void) -{ - unsigned char response[5]; - unsigned char argument[4]; - int i,j; - - for(i=0;i<4;i++) - argument[i] = 0; - - // Set clock to less than 400 kHz to start out - sdspi_regs->clkdiv = 128; - - // Delay at least 74 cycles - sd_assert_cs(); - for(i = 0; i < 100; i++) - sd_send_byte(SD_IDLE); - sd_deassert_cs(); - - // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58 - // Put card in idle state - if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0) - return 0; // Something went wrong in command - - j = 0; - do { - j++; - if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1) - sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument); - else - j = SD_IDLE_WAIT_MAX; - } - while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX)); - - if(j>= SD_IDLE_WAIT_MAX) // IDLE timeout exceeded, card asleep - return 0; - - // CMD58 reads the SD card capabilities - if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0) - return 0; // CMD58 FAIL - - if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33) - return 0; // Card doesn't do 3.3V - - //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]); - - // Set blocklen here - sd_packarg(argument,SD_BLOCKLEN); - if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0) - return 0; // Set Blocklen failed - - // Reset back to high speed - sdspi_regs->clkdiv = 4; - //puts("finished init\n"); - return 1; -} - -int sd_send_command(unsigned char cmd,unsigned char response_type, - unsigned char *response,unsigned char *argument) -{ - int i; - char response_length; - unsigned char tmp; - - sd_assert_cs(); - sd_send_byte((cmd & 0x3F) | 0x40); - for(i=3;i>=0;i--) - sd_send_byte(argument[i]); - sd_send_byte(SD_CRC); // Always the same - - response_length = 0; - switch(response_type) - { - case SD_R1: - case SD_R1B: - response_length = 1; - break; - case SD_R2: - response_length = 2; - break; - case SD_R3: - response_length = 5; - break; - default: - break; - } - - // Wait for a response, which will have a 0 start bit - i = 0; - do - { - tmp = sd_rcv_byte(); - i++; - } - while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT); - - if(i>= SD_CMD_TIMEOUT) - { - sd_deassert_cs(); - //puts("cmd send timeout\n"); - return 0; - } - - for(i=response_length-1; i>=0; i--) - { - response[i] = tmp; - tmp = sd_rcv_byte(); - } - i = 0; - if(response_type == SD_R1B) - { - do - { - i++; - tmp = sd_rcv_byte(); - } - while(tmp != SD_IDLE); - sd_send_byte(SD_IDLE); - } - - //puts("send cmd success\n"); - sd_deassert_cs(); - return 1; -} - -int -sd_read_block (unsigned int blockaddr, unsigned char *buf) -{ - unsigned char response[5]; - unsigned char argument[4]; - unsigned int i = 0; - unsigned char tmp; - - blockaddr <<= SD_BLOCKLEN_NBITS; - sd_packarg(argument,blockaddr); - if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0) - return 0; //Failed READ; - if(response[0] != 0) - return 0; //Misaligned READ - - sd_assert_cs(); - i = 0; - do - { - tmp = sd_rcv_byte(); - i++; - } - while((tmp == 0xFF) && (i < SD_RD_TIMEOUT)); - if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0)) - { - sd_send_byte(SD_IDLE); // Send a dummy before quitting - return 0; // Data ERROR - } - for(i=0;i<SD_BLOCKLEN;i++) - buf[i] = sd_rcv_byte(); - return 1; - -} - -int -sd_write_block(unsigned int blockaddr, const unsigned char *buf) -{ - // FIXME not implemented yet - return 0; -} diff --git a/firmware/microblaze/lib/sd.h b/firmware/microblaze/lib/sd.h deleted file mode 100644 index e2d0ae38e..000000000 --- a/firmware/microblaze/lib/sd.h +++ /dev/null @@ -1,122 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2008 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef INCLUDED_SD_H -#define INCLUDED_SD_H - -#include "memory_map.h" - -#define SD_READY 1 -#define SD_IDLE_WAIT_MAX 100 -#define SD_CMD_TIMEOUT 100 -#define SD_RD_TIMEOUT 1000 - -#define SD_CMD0 0 -#define SD_CMD1 1 -#define SD_CMD9 9 -#define SD_CMD10 10 -#define SD_CMD12 12 -#define SD_CMD13 13 -#define SD_CMD16 16 -#define SD_CMD17 17 -#define SD_CMD18 18 -#define SD_CMD24 24 -#define SD_CMD25 25 -#define SD_CMD27 27 -#define SD_CMD28 28 -#define SD_CMD29 29 -#define SD_CMD30 30 -#define SD_CMD32 32 -#define SD_CMD33 33 -#define SD_CMD38 38 -#define SD_CMD55 55 -#define SD_CMD58 58 -#define SD_CMD59 59 -#define SD_ACMD41 41 -#define SD_IDLE 0xFF -#define SD_CRC 0x95 - -#define SD_R1 1 -#define SD_R1B 2 -#define SD_R2 3 -#define SD_R3 4 - -#define SD_CMD0_R SD_R1 -#define SD_CMD16_R SD_R1 -#define SD_CMD17_R SD_R1 -#define SD_CMD55_R SD_R1 -#define SD_ACMD41_R SD_R1 -#define SD_CMD58_R SD_R3 - -#define SD_BLOCKLEN 512 -#define SD_BLOCKLEN_NBITS 9 - -#define SD_MSK_IDLE 0x01 -#define SD_MSK_OCR_33 0xC0 -#define SD_MSK_TOK_DATAERROR 0xE0 - - -int sd_init(void); - -static inline void -sd_assert_cs(void) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; - sdspi_regs->status = 1; -} - -static inline void -sd_deassert_cs(void) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; - sdspi_regs->status = 0; -} - -static inline char -sd_rcv_byte(void) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; - sdspi_regs->send_dat = SD_IDLE; - while(sdspi_regs->status != SD_READY) - ; - return sdspi_regs-> receive_dat; -} - -static inline void -sd_send_byte(char dat) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; // Wait for status = 1 (ready) - sdspi_regs->send_dat = dat; -} - - -int sd_send_command(unsigned char cmd,unsigned char response_type, - unsigned char *response,unsigned char *argument); - -int sd_read_block (unsigned int blockaddr, unsigned char *buf); -int sd_write_block(unsigned int blockaddr, const unsigned char *buf); - -#endif /* INCLUDED_SD_H */ diff --git a/host/lib/usrp/usrp2/usrp2_regs.cpp b/host/lib/usrp/usrp2/usrp2_regs.cpp new file mode 100644 index 000000000..071ba0cd2 --- /dev/null +++ b/host/lib/usrp/usrp2/usrp2_regs.cpp @@ -0,0 +1,94 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "usrp2_regs.hpp" + +int sr_addr(int misc_output_base, int sr) { + return misc_output_base + 4 * sr; +} + +usrp2_regs_t usrp2_get_regs(int hw_rev) { + + //how about you just make this dependent on hw_rev instead of doing the init before main, and give up the const globals, since the application won't ever need both. + const int misc_output_base = (hw_rev>=USRP2P_FIRST_HW_REV) ? USRP2P_MISC_OUTPUT_BASE : USRP2_MISC_OUTPUT_BASE, + gpio_base = (hw_rev>=USRP2P_FIRST_HW_REV) ? USRP2P_GPIO_BASE : USRP2_GPIO_BASE, + atr_base = (hw_rev>=USRP2P_FIRST_HW_REV) ? USRP2P_ATR_BASE : USRP2_ATR_BASE, + bp_base = (hw_rev>=USRP2P_FIRST_HW_REV) ? USRP2P_BP_STATUS_BASE : USRP2_BP_STATUS_BASE; + + usrp2_regs_t x; + x.sr_misc = 0; + x.sr_tx_prot_eng = 32; + x.sr_rx_prot_eng = 48; + x.sr_buffer_pool_ctrl = 64; + x.sr_udp_sm = 96; + x.sr_tx_dsp = 208; + x.sr_tx_ctrl = 224; + x.sr_rx_dsp = 160; + x.sr_rx_ctrl = 176; + x.sr_time64 = 192; + x.sr_simtimer = 198; + x.sr_last = 255; + x.misc_ctrl_clock = sr_addr(misc_output_base, 0); + x.misc_ctrl_serdes = sr_addr(misc_output_base, 1); + x.misc_ctrl_adc = sr_addr(misc_output_base, 2); + x.misc_ctrl_leds = sr_addr(misc_output_base, 3); + x.misc_ctrl_phy = sr_addr(misc_output_base, 4); + x.misc_ctrl_dbg_mux = sr_addr(misc_output_base, 5); + x.misc_ctrl_ram_page = sr_addr(misc_output_base, 6); + x.misc_ctrl_flush_icache = sr_addr(misc_output_base, 7); + x.misc_ctrl_led_src = sr_addr(misc_output_base, 8); + x.time64_secs = sr_addr(misc_output_base, x.sr_time64 + 0); + x.time64_ticks = sr_addr(misc_output_base, x.sr_time64 + 1); + x.time64_flags = sr_addr(misc_output_base, x.sr_time64 + 2); + x.time64_imm = sr_addr(misc_output_base, x.sr_time64 + 3); + x.time64_tps = sr_addr(misc_output_base, x.sr_time64 + 4); + x.time64_secs_rb = bp_base + 4*10; + x.time64_ticks_rb = bp_base + 4*11; + x.dsp_tx_freq = sr_addr(misc_output_base, x.sr_tx_dsp + 0); + x.dsp_tx_scale_iq = sr_addr(misc_output_base, x.sr_tx_dsp + 1); + x.dsp_tx_interp_rate = sr_addr(misc_output_base, x.sr_tx_dsp + 2); + x.dsp_tx_mux = sr_addr(misc_output_base, x.sr_tx_dsp + 4); + x.dsp_rx_freq = sr_addr(misc_output_base, x.sr_rx_dsp + 0); + x.dsp_rx_scale_iq = sr_addr(misc_output_base, x.sr_rx_dsp + 1); + x.dsp_rx_decim_rate = sr_addr(misc_output_base, x.sr_rx_dsp + 2); + x.dsp_rx_dcoffset_i = sr_addr(misc_output_base, x.sr_rx_dsp + 3); + x.dsp_rx_dcoffset_q = sr_addr(misc_output_base, x.sr_rx_dsp + 4); + x.dsp_rx_mux = sr_addr(misc_output_base, x.sr_rx_dsp + 5); + x.gpio_io = gpio_base + 0; + x.gpio_ddr = gpio_base + 4; + x.gpio_tx_sel = gpio_base + 8; + x.gpio_rx_sel = gpio_base + 12; + x.atr_idle_txside = atr_base + 0; + x.atr_idle_rxside = atr_base + 2; + x.atr_intx_txside = atr_base + 4; + x.atr_intx_rxside = atr_base + 6; + x.atr_inrx_txside = atr_base + 8; + x.atr_inrx_rxside = atr_base + 10; + x.atr_full_txside = atr_base + 12; + x.atr_full_rxside = atr_base + 14; + x.rx_ctrl_stream_cmd = sr_addr(misc_output_base, x.sr_rx_ctrl + 0); + x.rx_ctrl_time_secs = sr_addr(misc_output_base, x.sr_rx_ctrl + 1); + x.rx_ctrl_time_ticks = sr_addr(misc_output_base, x.sr_rx_ctrl + 2); + x.rx_ctrl_clear_overrun = sr_addr(misc_output_base, x.sr_rx_ctrl + 3); + x.rx_ctrl_vrt_header = sr_addr(misc_output_base, x.sr_rx_ctrl + 4); + x.rx_ctrl_vrt_stream_id = sr_addr(misc_output_base, x.sr_rx_ctrl + 5); + x.rx_ctrl_vrt_trailer = sr_addr(misc_output_base, x.sr_rx_ctrl + 6); + x.rx_ctrl_nsamps_per_pkt = sr_addr(misc_output_base, x.sr_rx_ctrl + 7); + x.rx_ctrl_nchannels = sr_addr(misc_output_base, x.sr_rx_ctrl + 8); + + return x; +} diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index 1a5864c85..0ebce6a85 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -18,6 +18,88 @@ #ifndef INCLUDED_USRP2_REGS_HPP #define INCLUDED_USRP2_REGS_HPP +//these are used to set the + +#define USRP2_MISC_OUTPUT_BASE 0xD400 +#define USRP2_GPIO_BASE 0xC800 +#define USRP2_ATR_BASE 0xE400 +#define USRP2_BP_STATUS_BASE 0xCC00 + +#define USRP2P_MISC_OUTPUT_BASE 0x2000 +#define USRP2P_GPIO_BASE 0x3200 +#define USRP2P_ATR_BASE 0x3800 +#define USRP2P_BP_STATUS_BASE 0x3300 + +#define USRP2P_FIRST_HW_REV 0x0A00 + +typedef struct { + int sr_misc; + int sr_tx_prot_eng; + int sr_rx_prot_eng; + int sr_buffer_pool_ctrl; + int sr_udp_sm; + int sr_tx_dsp; + int sr_tx_ctrl; + int sr_rx_dsp; + int sr_rx_ctrl; + int sr_time64; + int sr_simtimer; + int sr_last; + int misc_ctrl_clock; + int misc_ctrl_serdes; + int misc_ctrl_adc; + int misc_ctrl_leds; + int misc_ctrl_phy; + int misc_ctrl_dbg_mux; + int misc_ctrl_ram_page; + int misc_ctrl_flush_icache; + int misc_ctrl_led_src; + int time64_secs; // value to set absolute secs to on next PPS + int time64_ticks; // value to set absolute ticks to on next PPS + int time64_flags; // flags -- see chart below + int time64_imm; // set immediate (0=latch on next pps, 1=latch immediate, default=0) + int time64_tps; // ticks per second rollover count + int time64_secs_rb; + int time64_ticks_rb; + int dsp_tx_freq; + int dsp_tx_scale_iq; + int dsp_tx_interp_rate; + int dsp_tx_mux; + int dsp_rx_freq; + int dsp_rx_scale_iq; + int dsp_rx_decim_rate; + int dsp_rx_dcoffset_i; + int dsp_rx_dcoffset_q; + int dsp_rx_mux; + int gpio_base; + int gpio_io; + int gpio_ddr; + int gpio_tx_sel; + int gpio_rx_sel; + int atr_base; + int atr_idle_txside; + int atr_idle_rxside; + int atr_intx_txside; + int atr_intx_rxside; + int atr_inrx_txside; + int atr_inrx_rxside; + int atr_full_txside; + int atr_full_rxside; + int rx_ctrl_stream_cmd; + int rx_ctrl_time_secs; + int rx_ctrl_time_ticks; + int rx_ctrl_clear_overrun; + int rx_ctrl_vrt_header; + int rx_ctrl_vrt_stream_id; + int rx_ctrl_vrt_trailer; + int rx_ctrl_nsamps_per_pkt; + int rx_ctrl_nchannels; +} usrp2_regs_t; + +extern const usrp2_regs_t usrp2_regs; //the register definitions, set in usrp2_regs.cpp and usrp2p_regs.cpp + +usrp2_regs_t usrp2_get_regs(int hw_rev); + //////////////////////////////////////////////////// // Settings Bus, Slave #7, Not Byte Addressable! // @@ -25,27 +107,12 @@ // 1KB of address space (== 256 32-bit write-only regs) -#define MISC_OUTPUT_BASE 0xD400 +//#define MISC_OUTPUT_BASE 0xD400 //#define TX_PROTOCOL_ENGINE_BASE 0xD480 //#define RX_PROTOCOL_ENGINE_BASE 0xD4C0 //#define BUFFER_POOL_CTRL_BASE 0xD500 //#define LAST_SETTING_REG 0xD7FC // last valid setting register -#define SR_MISC 0 -#define SR_TX_PROT_ENG 32 -#define SR_RX_PROT_ENG 48 -#define SR_BUFFER_POOL_CTRL 64 -#define SR_UDP_SM 96 -#define SR_TX_DSP 208 -#define SR_TX_CTRL 224 -#define SR_RX_DSP 160 -#define SR_RX_CTRL 176 -#define SR_TIME64 192 -#define SR_SIMTIMER 198 -#define SR_LAST 255 - -#define _SR_ADDR(sr) ((MISC_OUTPUT_BASE) + (4*(sr))) - ///////////////////////////////////////////////// // SPI Slave Constants //////////////////////////////////////////////// @@ -58,20 +125,11 @@ #define SPI_SS_TX_DAC 32 #define SPI_SS_TX_ADC 64 #define SPI_SS_TX_DB 128 +#define SPI_SS_ADS62P44 256 //for usrp2p ///////////////////////////////////////////////// // Misc Control //////////////////////////////////////////////// -#define U2_REG_MISC_CTRL_CLOCK _SR_ADDR(0) -#define U2_REG_MISC_CTRL_SERDES _SR_ADDR(1) -#define U2_REG_MISC_CTRL_ADC _SR_ADDR(2) -#define U2_REG_MISC_CTRL_LEDS _SR_ADDR(3) -#define U2_REG_MISC_CTRL_PHY _SR_ADDR(4) // LSB is reset line to eth phy -#define U2_REG_MISC_CTRL_DBG_MUX _SR_ADDR(5) -#define U2_REG_MISC_CTRL_RAM_PAGE _SR_ADDR(6) // FIXME should go somewhere else... -#define U2_REG_MISC_CTRL_FLUSH_ICACHE _SR_ADDR(7) // Flush the icache -#define U2_REG_MISC_CTRL_LED_SRC _SR_ADDR(8) // HW or SW control for LEDs - #define U2_FLAG_MISC_CTRL_SERDES_ENABLE 8 #define U2_FLAG_MISC_CTRL_SERDES_PRBSEN 4 #define U2_FLAG_MISC_CTRL_SERDES_LOOPEN 2 @@ -99,14 +157,6 @@ * * </pre> */ -#define U2_REG_TIME64_SECS _SR_ADDR(SR_TIME64 + 0) // value to set absolute secs to on next PPS -#define U2_REG_TIME64_TICKS _SR_ADDR(SR_TIME64 + 1) // value to set absolute ticks to on next PPS -#define U2_REG_TIME64_FLAGS _SR_ADDR(SR_TIME64 + 2) // flags - see chart above -#define U2_REG_TIME64_IMM _SR_ADDR(SR_TIME64 + 3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) -#define U2_REG_TIME64_TPS _SR_ADDR(SR_TIME64 + 4) // the ticks per second rollover count - -#define U2_REG_TIME64_SECS_RB (0xCC00 + 4*10) -#define U2_REG_TIME64_TICKS_RB (0xCC00 + 4*11) //pps flags (see above) #define U2_FLAG_TIME64_PPS_NEGEDGE (0 << 0) @@ -120,9 +170,6 @@ ///////////////////////////////////////////////// // DSP TX Regs //////////////////////////////////////////////// -#define U2_REG_DSP_TX_FREQ _SR_ADDR(SR_TX_DSP + 0) -#define U2_REG_DSP_TX_SCALE_IQ _SR_ADDR(SR_TX_DSP + 1) // {scale_i,scale_q} -#define U2_REG_DSP_TX_INTERP_RATE _SR_ADDR(SR_TX_DSP + 2) /*! * \brief output mux configuration. @@ -158,17 +205,11 @@ * The default value is 0x10 * </pre> */ -#define U2_REG_DSP_TX_MUX _SR_ADDR(SR_TX_DSP + 4) ///////////////////////////////////////////////// // DSP RX Regs //////////////////////////////////////////////// -#define U2_REG_DSP_RX_FREQ _SR_ADDR(SR_RX_DSP + 0) -#define U2_REG_DSP_RX_SCALE_IQ _SR_ADDR(SR_RX_DSP + 1) // {scale_i,scale_q} -#define U2_REG_DSP_RX_DECIM_RATE _SR_ADDR(SR_RX_DSP + 2) -#define U2_REG_DSP_RX_DCOFFSET_I _SR_ADDR(SR_RX_DSP + 3) // Bit 31 high sets fixed offset mode, using lower 14 bits, - // otherwise it is automatic -#define U2_REG_DSP_RX_DCOFFSET_Q _SR_ADDR(SR_RX_DSP + 4) // Bit 31 high sets fixed offset mode, using lower 14 bits + /*! * \brief input mux configuration. * @@ -190,20 +231,10 @@ * The default value is 0x4 * </pre> */ -#define U2_REG_DSP_RX_MUX _SR_ADDR(SR_RX_DSP + 5) // called adc_mux in dsp_core_rx.v //////////////////////////////////////////////// // GPIO, Slave 4 //////////////////////////////////////////////// -// -// These go to the daughterboard i/o pins -// -#define U2_REG_GPIO_BASE 0xC800 - -#define U2_REG_GPIO_IO U2_REG_GPIO_BASE + 0 // 32 bits, gpio io pins (tx high 16 bits, rx low 16 bits) -#define U2_REG_GPIO_DDR U2_REG_GPIO_BASE + 4 // 32 bits, gpio ddr, 1 means output (tx high 16 bits, rx low 16 bits) -#define U2_REG_GPIO_TX_SEL U2_REG_GPIO_BASE + 8 // 16 2-bit fields select which source goes to TX DB -#define U2_REG_GPIO_RX_SEL U2_REG_GPIO_BASE + 12 // 16 2-bit fields select which source goes to RX DB // each 2-bit sel field is layed out this way #define U2_FLAG_GPIO_SEL_GPIO 0 // if pin is an output, set by GPIO register @@ -214,31 +245,11 @@ /////////////////////////////////////////////////// // ATR Controller, Slave 11 //////////////////////////////////////////////// -#define U2_REG_ATR_BASE 0xE400 -#define U2_REG_ATR_IDLE_TXSIDE U2_REG_ATR_BASE + 0 -#define U2_REG_ATR_IDLE_RXSIDE U2_REG_ATR_BASE + 2 -#define U2_REG_ATR_INTX_TXSIDE U2_REG_ATR_BASE + 4 -#define U2_REG_ATR_INTX_RXSIDE U2_REG_ATR_BASE + 6 -#define U2_REG_ATR_INRX_TXSIDE U2_REG_ATR_BASE + 8 -#define U2_REG_ATR_INRX_RXSIDE U2_REG_ATR_BASE + 10 -#define U2_REG_ATR_FULL_TXSIDE U2_REG_ATR_BASE + 12 -#define U2_REG_ATR_FULL_RXSIDE U2_REG_ATR_BASE + 14 /////////////////////////////////////////////////// // VITA RX CTRL regs /////////////////////////////////////////////////// -// The following 3 are logically a single command register. -// They are clocked into the underlying fifo when time_ticks is written. -#define U2_REG_RX_CTRL_STREAM_CMD _SR_ADDR(SR_RX_CTRL + 0) // {now, chain, num_samples(30) -#define U2_REG_RX_CTRL_TIME_SECS _SR_ADDR(SR_RX_CTRL + 1) -#define U2_REG_RX_CTRL_TIME_TICKS _SR_ADDR(SR_RX_CTRL + 2) - -#define U2_REG_RX_CTRL_CLEAR_OVERRUN _SR_ADDR(SR_RX_CTRL + 3) // write anything to clear overrun -#define U2_REG_RX_CTRL_VRT_HEADER _SR_ADDR(SR_RX_CTRL + 4) // word 0 of packet. FPGA fills in packet counter -#define U2_REG_RX_CTRL_VRT_STREAM_ID _SR_ADDR(SR_RX_CTRL + 5) // word 1 of packet. -#define U2_REG_RX_CTRL_VRT_TRAILER _SR_ADDR(SR_RX_CTRL + 6) -#define U2_REG_RX_CTRL_NSAMPS_PER_PKT _SR_ADDR(SR_RX_CTRL + 7) -#define U2_REG_RX_CTRL_NCHANNELS _SR_ADDR(SR_RX_CTRL + 8) // 1 in basic case, up to 4 for vector sources + #endif /* INCLUDED_USRP2_REGS_HPP */ |