diff options
| -rw-r--r-- | host/docs/rd_testing.dox | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/host/docs/rd_testing.dox b/host/docs/rd_testing.dox index d8c006b50..7c808342c 100644 --- a/host/docs/rd_testing.dox +++ b/host/docs/rd_testing.dox @@ -225,8 +225,8 @@ debugging: https://kb.ettus.com/Debugging_FPGA_images | Test Code | Device | Peripherals | Manual Test Procedure | Automatic Test Procedure | |--------------------------|---------------|-------------|------------------------------------|----------------------------------| | FPGADSPVERIF-X310-HG-v1 | USRP X310 | 2x UBX | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | -| FPGADSPVERIF-X310-XG-v1 | USRP X300 | 2x UBX | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | -| FPGADSPVERIF-X300-HG-v1 | USRP X310 | 2x UBX | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | +| FPGADSPVERIF-X310-XG-v1 | USRP X310 | 2x UBX | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | +| FPGADSPVERIF-X300-HG-v1 | USRP X300 | 2x UBX | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | | FPGADSPVERIF-X300-XG-v1 | USRP X300 | 2x UBX | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | | FPGADSPVERIF-E310-SG1-v1 | USRP E310 SG1 | None | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | | FPGADSPVERIF-E310-SG3-v1 | USRP E310 SG3 | None | \ref rdtesting_fpgadspverif_manual | \ref rdtesting_fpgadspverif_auto | @@ -384,12 +384,12 @@ rates and channel configurations without any data flow issues. | Channels | Sample Rates | Duration | |---------------|-------------------------|----------| -| 1x RX | 1e6, 10e6, 25e6, 50e6 | 60 | -| 2x RX | 1e6, 10e6, 25e6 | 60 | -| 1x TX | 1e6, 10e6, 25e6, 50e6 | 60 | -| 2x TX | 1e6, 10e6, 25e6 | 60 | -| 1x RX & 1x TX | 1e6, 10e6, 25e6, 50e6 | 60 | -| 2x RX & 2x TX | 1e6, 10e6, 25e6 | 60 | +| 1x RX | 1e6, 10e6, 25e6 | 60 | +| 2x RX | 1e6, 10e6 | 60 | +| 1x TX | 1e6, 10e6, 25e6 | 60 | +| 2x TX | 1e6, 10e6 | 60 | +| 1x RX & 1x TX | 1e6, 10e6, 25e6 | 60 | +| 2x RX & 2x TX | 1e6, 10e6 | 60 | #### USRP X3x0: PCIe Interface @@ -493,9 +493,9 @@ Software Required 6. Set Signal Generator output power at -30 dBm. 7. From the top of the UHD source, run the command: - - `./tools/gr-usrptest/apps/usrp_phasealignment.py --args "addr0=<first X3x0 IP addr>,addr1=<second X3x0 IP addr>,dboard_clock_rate=25e6" --clock-source external --time-source external --sync pps --spec "A:0" --channels 0,1 -s 10e6 -g 25 -f \<lowest DB freq\> --freq-bands \<# frequency bands\> --start-freq \<lowest freq\> --stop-freq \<highest freq\> --duration 2.0 --auto` + - `./tools/gr-usrptest/apps/usrp_phasealignment.py --args "addr0=<first X3x0 IP addr>,addr1=<second X3x0 IP addr>,dboard_clock_rate=20e6" --clock-source external --time-source external --sync pps --spec "A:0" --channels 0,1 -s 10e6 -g 25 -f \<lowest DB freq\> --freq-bands \<# frequency bands\> --start-freq \<lowest freq\> --stop-freq \<highest freq\> --duration 2.0 --auto` -8. At each frequency step, tune Signal Generator to the displayed frequency + 1 MHz and increase output power by 3 dB. +8. At each frequency step, tune Signal Generator to the displayed frequency + 1 MHz and increase output power by 2dB. 9. Analyze terminal output. The "run avg" across all runs should not deviate more than 2 degrees and the "stddev" for any run should not deviate more than 2 degrees. \subsection rdtesting_phase_rx_N2x0_MIMO N2x0 MIMO with SBX |