diff options
| -rw-r--r-- | CHANGELOG | 5 | ||||
| -rw-r--r-- | host/cmake/debian/changelog | 113 | ||||
| -rw-r--r-- | images/manifest.txt | 8 |
3 files changed, 120 insertions, 6 deletions
@@ -4,7 +4,8 @@ Change Log for Releases ## 003.012.000.000 * N3x0: Add White Rabbit support, add N300 support, standard BIST includes fan, fix issue with 1GigE, switch to 2 radio blocks - with 2 channels each, upgrade TDC to version 2.0 + with 2 channels each, upgrade TDC to version 2.0, fix issue in + ARM deframer * X300: Enable BasicRX to use A/B/AB/BA muxing setups, more consistent logging, fix enumeration issue with TwinRX * USRP2/N2x0: Re-add ability to modulate in the DAC, improve ISE @@ -31,6 +32,8 @@ Change Log for Releases * Fix license headers * This release includes all bugfixes and features from previous releases, in particular, the 3.11.* release cycle +* Known issues: N310: In some rare scenarios at high rates, streaming + can fail and even bring the FPGA into a bad state. ## 003.011.001.000 * N310: fix compiler warnings diff --git a/host/cmake/debian/changelog b/host/cmake/debian/changelog index 11488afc7..72966146f 100644 --- a/host/cmake/debian/changelog +++ b/host/cmake/debian/changelog @@ -1,3 +1,116 @@ +uhd (3.12.0.0-0ubuntu1) trusty; urgency=low + + * N3x0: Add White Rabbit support, add N300 support, standard BIST + includes fan, fix issue with 1GigE, switch to 2 radio blocks + with 2 channels each, upgrade TDC to version 2.0, fix issue in + ARM deframer + * X300: Enable BasicRX to use A/B/AB/BA muxing setups, more consistent + logging, fix enumeration issue with TwinRX + * USRP2/N2x0: Re-add ability to modulate in the DAC, improve ISE + settings to better meet timing + * B205mini: Fix global reset, improve timing in b205_ref_pll + * UHD: Remove a lot of Boost usage, mostly replaced by C++11 features, + more unit tests, fix Boost 1.67 compatibility, fix compiler + warnings, add API to query clock rate range, fix get_usrp_?x_info + * MPM: Refactored N3xx code, moved C++ standard to 14, refactor + Boost.Python bindings, use CMake variable MPM_DEVICE + * Logging: Allow disabling fastpath msgs at runtime + * Docs: Clarified meaning of DSP frequencies, improved manual + section on synchronization, added some known issues to B100, + USRP2, and USRP1, update test test procedure description + * Examples: Improved benchmark_rate (added failure thresholds, fixed + incorrect calculation of samples on drops, fixed timeout values), + minor fixes to txrx_loopback_to_file + * Utils: Handle U's in calibration tools, create-lvbitx.py is now Py3k + compatible, fixed git-hash.sh + * RFNoC: DDCs/DUCs use DDSes instead of CORDIC, add DMA-based replay + block in FPGA, add 64-bit support to axi_wrapper, add compat + number to radio block, + * Debian: Fix rules file, fix Changelog format + * Fix license headers + * This release includes all bugfixes and features from previous + releases, in particular, the 3.11.* release cycle + + -- Ettus Research <packages@ettus.com> Tue, 5 Jun 2018 10:38:00 -0800 + +uhd (3.11.1.0-0ubuntu1) trusty; urgency=low + + * N310: fix compiler warnings + * N310: Implement digital loopback + * N3xx: Add N3xx devtest + * X300: Properly coerce master clock rate (tick rate) + * X300: handle bad weak_ptr during pcie discovery + * X300: handle bad weak_ptr during pcie discovery + * X300: Fix check_radio_config() to fix errors when using a single dboard + in slot A + * B200: docs: Suggest modifying recv_frame_size for more stability + * B200: Fix bandwidth warnings and ranges + * N2xx: Fix regression issue that limited tuning range + * UBX: Change antenna functions to coercers on antenna/value properties + * adf4002: Fix register programming for power down bit + * UHD: Fix config file path for some Windows builds + * UHD: Add operators == and != for uhd::dict + * UHD: Add device_addr_t constructor from map + * UHD: Fix range of gain group to skip gains with zero step + * UHD: Changes to support Boost 1.67 + * UHD: Correctly set end of burst flag in RX metadata + * UHD: Reduce usage of boost::assign, boost::this_thread::sleep, and boost:bind + * UHD: Update multi_usrp::get_usrp_?x_info() for MPM devices + * UHD: Refactor static const values to fix linker errors in niusrprio + * mpm: cmake: Add git hash and version info to Python module + * mpm: Add reference counters to UIO + * mpm: Add offset to EEPROM reads + * mpm: Disable PPS out during initialization + * mpm: Update cmake to find the correct python3 + * mpm: Bump maximum supported revision to 5 (Rev F) + * mpm: Fixed db slot typo in db-id + * mpm: Increased claim timeout, made a separate RPC connection for claim, and + added asyn calls for long RPC executions + * mpm: Improve xport<->SFP mapping algorithm + * mpmd: Improved find routine to fail fast and verify correct device is + reachable + * mpmd: Add missing virtual destructors + * rfnoc/x300: Make sure peek32() and peek64() are called with actual addresses + * rfnoc: ctrl_iface cleanup + * rfnoc radio: Improve warning for too many samples requested + * rfnoc radio: get_rx_stream resets sequence num + * examples: Increase settling time, increase buffer fill time, and fix subdevice + selection in txrx_loopback_to_file + * examples: Improvements to benchmark_rate + * utils: downloader supports multiple RegExs + * utils: Added code to handle underruns during self calibration + * utils: Fix 30s tiemout in query_gpsdo_sensors + * logging: Improve style consistency and demote some messages + * logging: Fix UHD_LOG_FILE cmake variable + * Docs: Add Known Issues section to USRP1, B100, and USRP2/N2x0 + * Docs: Hide dependencies directory from Doxygen + * Docs: Clarify subdev specs and magnesium driver usage for N300/N310 + * cmake: Improve warning for missing requests + * cmake: update NSIS template + * cmake: Remove images downloader section (replaced by manifest) + + -- Ettus Research <packages@ettus.com> Wed, 16 May 2018 10:05:17 -0800 + +uhd (3.11.0.1-0ubuntu1) trusty; urgency=low + + * N300: Added driver support (includes some refactoring of N3xx + codebase) + * MPM: Fix PyLint warnings, Fix error handling for TCA communication + errors, Fix printout of AD9371 version + * uhd_images_downloader: Create unique archive names for images archives + (now include git hashes in the filename) + * uhd_images_downloader: Fix SHA256 check + * utils: Add support for N3xx filesystem images to images downloader + * UHD: Minor logging fixes + * UHD: fix legacy compat to work with 2TX radio block + * X300: improve lvbitx bitstream md5 read time + * examples: Enhance benchmark_rate with more stats and timestamps for errors + * cmake: Correctly fail when an unavailable component is requested + * debian: Add UHDConfig.cmake to install list for libuhd-dev + + -- Ettus Research <packages@ettus.com> Wed, 16 May 2018 10:05:17 -0800 + + uhd (3.11.0.0-0ubuntu1) trusty; urgency=low * N310: Added driver diff --git a/images/manifest.txt b/images/manifest.txt index 94e06a47b..eebc0acdd 100644 --- a/images/manifest.txt +++ b/images/manifest.txt @@ -19,11 +19,9 @@ n3xx_n300_fpga_default fpga-7d5d8db n3xx/fpga-7d5d8db/n3xx_n300_ # N3XX Mykonos firmware #n3xx_n310_fw_default fpga-6bea23d n3xx/fpga-6bea23d/n3xx_n310_fw_default-g6bea23d.zip 0 # N300-Series Filesystems, etc -#n3xx_common_sdk_default fpga-6bea23d n3xx/fpga-6bea23d/n3xx_common_sdk_default-g6bea23d.zip 0 -#n3xx_n310_mender_default fpga-6bea23d n3xx/fpga-6bea23d/n3xx_n310_mender_default-g6bea23d.zip 0 -#n3xx_n300_mender_default fpga-6bea23d n3xx/fpga-6bea23d/n3xx_n300_mender_default-g6bea23d.zip 0 -#n3xx_n310_sdimg_default fpga-6bea23d n3xx/fpga-6bea23d/n3xx_n310_sdimg_default-g6bea23d.zip 0 -#n3xx_n300_sdimg_default fpga-6bea23d n3xx/fpga-6bea23d/n3xx_n300_sdimg_default-g6bea23d.zip 0 +n3xx_common_sdk_default meta-ettus-v3.12.0.0 n3xx/meta-ettus-v3.12.0.0/n3xx_common_sdk_default-v3.12.0.0.zip 0 +n3xx_common_mender_default meta-ettus-v3.12.0.0 n3xx/meta-ettus-v3.12.0.0/n3xx_common_mender_default-v3.12.0.0.zip 0 +n3xx_common_sdimg_default meta-ettus-v3.12.0.0 n3xx/meta-ettus-v3.12.0.0/n3xx_common_sdimg_default-v3.12.0.0.zip 0 # B200-Series b2xx_b200_fpga_default fpga-1c568e6 b2xx/fpga-1c568e6/b2xx_b200_fpga_default-g1c568e6.zip 7ba7561d517dc9a474b01f06c273f921a3a27005e41cd38fde7cd03bbb00284f |