diff options
| -rw-r--r-- | mpm/include/mpm/ad937x/ad937x_ctrl.hpp | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/mpm/include/mpm/ad937x/ad937x_ctrl.hpp b/mpm/include/mpm/ad937x/ad937x_ctrl.hpp index 1e99cb98c..82e3d0ea2 100644 --- a/mpm/include/mpm/ad937x/ad937x_ctrl.hpp +++ b/mpm/include/mpm/ad937x/ad937x_ctrl.hpp @@ -59,6 +59,7 @@ public: * * \param spi_mutex a mutex that will be locked whenever the SPI iface is to be used * \param iface the spi_iface for accessing the AD9371 + * \param gain_pins a struct defining the usage of gain pins by this device */ static sptr make( std::shared_ptr<std::mutex> spi_mutex, @@ -66,17 +67,37 @@ public: mpm::ad937x::gpio::gain_pins_t gain_pins); virtual ~ad937x_ctrl(void) {} + //! initializes the AD9371, checks basic functionality, and prepares the chip to receive a SYSREF pulse virtual void begin_initialization() = 0; + + //! finishes initialization of the AD9371 by loading the ARM binary and setting a default RF configuration virtual void finish_initialization() = 0; + + //! resets and start the JESD deframer (JESD Rx, for RF Tx) virtual void start_jesd_rx() = 0; + + //! starts the JESD framer (JESD Tx, for RF Rx) virtual void start_jesd_tx() = 0; + + //! moves the AD9371 to a running state, RF inputs/outputs will be unmuted virtual void start_radio() = 0; + + //! moves the AD9371 to an idle state, RF inputs/outputs will be muted virtual void stop_radio() = 0; + + //! get the multichip sync status byte, see AD9371 data sheet for more information virtual uint8_t get_multichip_sync_status() = 0; + + //! get the JESD framer status byte, see AD9371 data sheet for more information virtual uint8_t get_framer_status() = 0; + + //! get the JESD deframer status byte, see AD9371 data sheet for more information virtual uint8_t get_deframer_status() = 0; + //! get the ilas config status bytes, see AD9371 data sheet for more information virtual uint16_t get_ilas_config_match() = 0; + + //! enable or disable JESD loopback, when enabled JESD Rx will be directly connected to JESD Tx virtual void enable_jesd_loopback(uint8_t enable) = 0; //! get the RF frequency range for the AD9371 @@ -120,6 +141,11 @@ public: */ virtual double set_gain(const std::string &which, double value) = 0; + /*! \brief get the gain for the frontend which + * + * \param which frontend string + * \return actual gain value + */ virtual double get_gain(const std::string &which) = 0; /*! \brief set the agc mode for all RX channels |