diff options
| -rw-r--r-- | host/docs/usrp_e3x0.dox | 39 |
1 files changed, 38 insertions, 1 deletions
diff --git a/host/docs/usrp_e3x0.dox b/host/docs/usrp_e3x0.dox index a05914bba..30a52bbf4 100644 --- a/host/docs/usrp_e3x0.dox +++ b/host/docs/usrp_e3x0.dox @@ -264,7 +264,7 @@ You may need to change the USRP's IP address for several reasons: - **RF B Group** + **TX/RX LED**: Indicates that data is streaming on the TX/RX channel on frontend B + **RX2 LED**: Indicates that data is streaming on the RX2 channel on frontend B -- **PWR**: Power switch +- **PWR**: Power switch with integrated status LED, for status description see below. - **SYNC**: Input port for external PPS signal @@ -272,6 +272,43 @@ You may need to change the USRP's IP address for several reasons: - **AUDIO**: Audio input / output +The status LED in the power switch indicates the power and charge status. +It's behavior is firmware version dependent. + +- **Version 1** (original E310) + + **Off**: Indicates device is off and not charging + + **Solid Red**: Indicates device is charging + + **Solid Green**: Indicates device is on + + **Fast Blinking Red**: Indicates an error code + + 1 - Low voltage error + + 2 - Regulator low voltage error + + 3 - FPGA power error + + 5 - 1.8V rail power error + + 6 - 3.3V rail power error + + 7 - Daughterboard / TX power error + + 9 - Temperature error + +- **Version 2** (E312 and upgraded E310) + + **Off**: Indicates device is off and not charging + + **Slow Blinking Green**: Indicates device is off and charging + + **Fast Blinking Green**: Indicates device is on and charging + + **Solid Green**: Indicates device is on (and not charging, if E312) + + **Solid Orange**: Indicates device is on and discharging + + **Fast Blinking Orange**: Indicates device is on, discharging, and charge is below 10% charge + + **Fast Blinking Red**: Indicates an error code + + 1 - Low voltage error + + 2 - Regulator low voltage error + + 3 - FPGA power error + + 4 - DRAM power error + + 5 - 1.8V rail power error + + 6 - 3.3V rail power error + + 7 - Daughterboard / TX power error + + 8 - Charger error + + 9 - Charger temperature error + + 10 - Battery low error + + 11 - Fuel Gauge temperature error + + 12 - Global (case) temperature error + \subsection e3x0_hw_rear_panel Rear Panel \image html e3x0_rp_overlay.png "USRP E310 Rear Panel" |