diff options
| -rw-r--r-- | host/include/uhd/usrp/multi_usrp.hpp | 85 | ||||
| -rw-r--r-- | host/lib/usrp/multi_usrp.cpp | 5 |
2 files changed, 39 insertions, 51 deletions
diff --git a/host/include/uhd/usrp/multi_usrp.hpp b/host/include/uhd/usrp/multi_usrp.hpp index 0cf50aa0d..9bb5b4381 100644 --- a/host/include/uhd/usrp/multi_usrp.hpp +++ b/host/include/uhd/usrp/multi_usrp.hpp @@ -33,7 +33,6 @@ #include <uhd/types/sensors.hpp> #include <uhd/usrp/subdev_spec.hpp> #include <uhd/usrp/dboard_iface.hpp> -#include <uhd/usrp/mboard_iface.hpp> #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> #include <complex> @@ -54,7 +53,7 @@ namespace uhd{ namespace usrp{ * In the single device, single channel case, these parameters can be unspecified. * * When using a single device with multiple channels: - * - Channel mapping is determined by the subdevice specifications + * - Channel mapping is determined by the frontend specifications * - All channels share a common RX sample rate * - All channels share a common TX sample rate * @@ -62,8 +61,8 @@ namespace uhd{ namespace usrp{ * - Channel mapping is determined by the device address arguments * - All boards share a common RX sample rate * - All boards share a common TX sample rate - * - All boards share a common RX subdevice specification size - * - All boards share a common TX subdevice specification size + * - All boards share a common RX frontend specification size + * - All boards share a common TX frontend specification size * - All boards must have synchronized times (see the set_time_*() calls) * * Example to setup channel mapping for multiple devices: @@ -75,13 +74,13 @@ namespace uhd{ namespace usrp{ * dev_addr["addr1"] = "192.168.10.3"; * multi_usrp::sptr dev = multi_usrp::make(dev_addr); * - * //set the board on 10.2 to use the A RX subdevice (RX channel 0) + * //set the board on 10.2 to use the A RX frontend (RX channel 0) * dev->set_rx_subdev_spec("A:A", 0); * - * //set the board on 10.3 to use the B RX subdevice (RX channel 1) + * //set the board on 10.3 to use the B RX frontend (RX channel 1) * dev->set_rx_subdev_spec("A:B", 1); * - * //set both boards to use the AB TX subdevice (TX channels 0 and 1) + * //set both boards to use the AB TX frontend (TX channels 0 and 1) * dev->set_tx_subdev_spec("A:AB", multi_usrp::ALL_MBOARDS); * * //now that all the channels are mapped, continue with configuration... @@ -316,30 +315,24 @@ public: * \return a vector of sensor names */ virtual std::vector<std::string> get_mboard_sensor_names(size_t mboard = 0) = 0; - - /*! - * Get a handle to the mboard_iface object which controls peripheral access. - * \return a mboard_iface::sptr object - */ - virtual mboard_iface::sptr get_mboard_iface(size_t mboard) = 0; /******************************************************************* * RX methods ******************************************************************/ /*! - * Set the RX subdevice specification: + * Set the RX frontend specification: * The subdev spec maps a physical part of a daughter-board to a channel number. * Set the subdev spec before calling into any methods with a channel number. * The subdev spec must be the same size across all motherboards. - * \param spec the new subdevice specification + * \param spec the new frontend specification * \param mboard the motherboard index 0 to M-1 */ virtual void set_rx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard = ALL_MBOARDS) = 0; /*! - * Get the RX subdevice specification. + * Get the RX frontend specification. * \param mboard the motherboard index 0 to M-1 - * \return the subdevice specification in use + * \return the frontend specification in use */ virtual uhd::usrp::subdev_spec_t get_rx_subdev_spec(size_t mboard = 0) = 0; @@ -351,9 +344,9 @@ public: virtual size_t get_rx_num_channels(void) = 0; /*! - * Get the name of the RX subdevice. + * Get the name of the RX frontend. * \param chan the channel index 0 to N-1 - * \return the subdevice name + * \return the frontend name */ virtual std::string get_rx_subdev_name(size_t chan = 0) = 0; @@ -453,28 +446,28 @@ public: virtual std::vector<std::string> get_rx_gain_names(size_t chan = 0) = 0; /*! - * Select the RX antenna on the subdevice. + * Select the RX antenna on the frontend. * \param ant the antenna name * \param chan the channel index 0 to N-1 */ virtual void set_rx_antenna(const std::string &ant, size_t chan = 0) = 0; /*! - * Get the selected RX antenna on the subdevice. + * Get the selected RX antenna on the frontend. * \param chan the channel index 0 to N-1 * \return the antenna name */ virtual std::string get_rx_antenna(size_t chan = 0) = 0; /*! - * Get a list of possible RX antennas on the subdevice. + * Get a list of possible RX antennas on the frontend. * \param chan the channel index 0 to N-1 * \return a vector of antenna names */ virtual std::vector<std::string> get_rx_antennas(size_t chan = 0) = 0; /*! - * Get the locked status of the LO on the subdevice. + * Get the locked status of the LO on the frontend. * \param chan the channel index 0 to N-1 * \return true for locked */ @@ -483,21 +476,21 @@ public: } /*! - * Set the RX bandwidth on the subdevice. + * Set the RX bandwidth on the frontend. * \param bandwidth the bandwidth in Hz * \param chan the channel index 0 to N-1 */ virtual void set_rx_bandwidth(double bandwidth, size_t chan = 0) = 0; /*! - * Get the RX bandwidth on the subdevice. + * Get the RX bandwidth on the frontend. * \param chan the channel index 0 to N-1 * \return the bandwidth in Hz */ virtual double get_rx_bandwidth(size_t chan = 0) = 0; /*! - * Read the RSSI value on the RX subdevice. + * Read the RSSI value on the RX frontend. * \param chan the channel index 0 to N-1 * \return the rssi in dB * \throw exception if RSSI readback not supported @@ -507,7 +500,7 @@ public: } /*! - * Get the dboard interface object for the RX subdevice. + * Get the dboard interface object for the RX frontend. * The dboard interface gives access to GPIOs, SPI, I2C, low-speed ADC and DAC. * Use at your own risk! * \param chan the channel index 0 to N-1 @@ -516,7 +509,7 @@ public: virtual dboard_iface::sptr get_rx_dboard_iface(size_t chan = 0) = 0; /*! - * Get an RX subdevice sensor value. + * Get an RX frontend sensor value. * \param name the name of the sensor * \param chan the channel index 0 to N-1 * \return a sensor value object @@ -524,7 +517,7 @@ public: virtual sensor_value_t get_rx_sensor(const std::string &name, size_t chan = 0) = 0; /*! - * Get a list of possible RX subdevice sensor names. + * Get a list of possible RX frontend sensor names. * \param chan the channel index 0 to N-1 * \return a vector of sensor names */ @@ -557,7 +550,7 @@ public: * Set the RX frontend IQ imbalance correction. * Use this to adjust the magnitude and phase of I and Q. * - * \param correction the complex correction value + * \param correction the complex correction (1.0 is full-scale) * \param chan the channel index 0 to N-1 */ virtual void set_rx_iq_balance(const std::complex<double> &correction, size_t chan = ALL_CHANS) = 0; @@ -566,19 +559,19 @@ public: * TX methods ******************************************************************/ /*! - * Set the TX subdevice specification: + * Set the TX frontend specification: * The subdev spec maps a physical part of a daughter-board to a channel number. * Set the subdev spec before calling into any methods with a channel number. * The subdev spec must be the same size across all motherboards. - * \param spec the new subdevice specification + * \param spec the new frontend specification * \param mboard the motherboard index 0 to M-1 */ virtual void set_tx_subdev_spec(const uhd::usrp::subdev_spec_t &spec, size_t mboard = ALL_MBOARDS) = 0; /*! - * Get the TX subdevice specification. + * Get the TX frontend specification. * \param mboard the motherboard index 0 to M-1 - * \return the subdevice specification in use + * \return the frontend specification in use */ virtual uhd::usrp::subdev_spec_t get_tx_subdev_spec(size_t mboard = 0) = 0; @@ -590,9 +583,9 @@ public: virtual size_t get_tx_num_channels(void) = 0; /*! - * Get the name of the TX subdevice. + * Get the name of the TX frontend. * \param chan the channel index 0 to N-1 - * \return the subdevice name + * \return the frontend name */ virtual std::string get_tx_subdev_name(size_t chan = 0) = 0; @@ -692,28 +685,28 @@ public: virtual std::vector<std::string> get_tx_gain_names(size_t chan = 0) = 0; /*! - * Select the TX antenna on the subdevice. + * Select the TX antenna on the frontend. * \param ant the antenna name * \param chan the channel index 0 to N-1 */ virtual void set_tx_antenna(const std::string &ant, size_t chan = 0) = 0; /*! - * Get the selected TX antenna on the subdevice. + * Get the selected TX antenna on the frontend. * \param chan the channel index 0 to N-1 * \return the antenna name */ virtual std::string get_tx_antenna(size_t chan = 0) = 0; /*! - * Get a list of possible TX antennas on the subdevice. + * Get a list of possible TX antennas on the frontend. * \param chan the channel index 0 to N-1 * \return a vector of antenna names */ virtual std::vector<std::string> get_tx_antennas(size_t chan = 0) = 0; /*! - * Get the locked status of the LO on the subdevice. + * Get the locked status of the LO on the frontend. * \param chan the channel index 0 to N-1 * \return true for locked */ @@ -722,21 +715,21 @@ public: } /*! - * Set the TX bandwidth on the subdevice. + * Set the TX bandwidth on the frontend. * \param bandwidth the bandwidth in Hz * \param chan the channel index 0 to N-1 */ virtual void set_tx_bandwidth(double bandwidth, size_t chan = 0) = 0; /*! - * Get the TX bandwidth on the subdevice. + * Get the TX bandwidth on the frontend. * \param chan the channel index 0 to N-1 * \return the bandwidth in Hz */ virtual double get_tx_bandwidth(size_t chan = 0) = 0; /*! - * Get the dboard interface object for the TX subdevice. + * Get the dboard interface object for the TX frontend. * The dboard interface gives access to GPIOs, SPI, I2C, low-speed ADC and DAC. * Use at your own risk! * \param chan the channel index 0 to N-1 @@ -745,7 +738,7 @@ public: virtual dboard_iface::sptr get_tx_dboard_iface(size_t chan = 0) = 0; /*! - * Get an TX subdevice sensor value. + * Get an TX frontend sensor value. * \param name the name of the sensor * \param chan the channel index 0 to N-1 * \return a sensor value object @@ -753,7 +746,7 @@ public: virtual sensor_value_t get_tx_sensor(const std::string &name, size_t chan = 0) = 0; /*! - * Get a list of possible TX subdevice sensor names. + * Get a list of possible TX frontend sensor names. * \param chan the channel index 0 to N-1 * \return a vector of sensor names */ @@ -771,7 +764,7 @@ public: * Set the TX frontend IQ imbalance correction. * Use this to adjust the magnitude and phase of I and Q. * - * \param correction the complex correction value + * \param correction the complex correction (1.0 is full-scale) * \param chan the channel index 0 to N-1 */ virtual void set_tx_iq_balance(const std::complex<double> &correction, size_t chan = ALL_CHANS) = 0; diff --git a/host/lib/usrp/multi_usrp.cpp b/host/lib/usrp/multi_usrp.cpp index 7b3890c9b..7383fa3c0 100644 --- a/host/lib/usrp/multi_usrp.cpp +++ b/host/lib/usrp/multi_usrp.cpp @@ -17,7 +17,6 @@ #include <uhd/property_tree.hpp> #include <uhd/usrp/multi_usrp.hpp> -#include <uhd/usrp/mboard_iface.hpp> #include <uhd/utils/msg.hpp> #include <uhd/exception.hpp> #include <uhd/utils/msg.hpp> @@ -429,10 +428,6 @@ public: return _tree->list(mb_root(mboard) / "sensors"); } - mboard_iface::sptr get_mboard_iface(size_t){ - return mboard_iface::sptr(); //not implemented - } - /******************************************************************* * RX methods ******************************************************************/ |