diff options
53 files changed, 1480 insertions, 1531 deletions
diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index 88b217f1b..189f937de 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -406,11 +406,11 @@ In the single channel case, only one chain is ever used. To receive from both channels, the user must set the RX subdevice specification. This hardware has only one daughterboard slot, -which has been aptly named slot "0". +which has been aptly named slot "A". In the following example, a TVRX2 is installed. Channel 0 is sourced from subdevice RX1, channel 1 is sourced from subdevice RX2: :: - usrp->set_rx_subdev_spec("0:RX1 0:RX2"); + usrp->set_rx_subdev_spec("A:RX1 A:RX2"); diff --git a/host/docs/usrp_e1xx.rst b/host/docs/usrp_e1xx.rst index fcaa57716..4ac9d133a 100644 --- a/host/docs/usrp_e1xx.rst +++ b/host/docs/usrp_e1xx.rst @@ -53,21 +53,6 @@ Example: uhd_usrp_probe --args="master_clock_rate=52e6" -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Clock rate recovery - unbricking -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -It is possible to set a clock rate such that the UHD can no longer communicate with the FPGA. -When this occurs, it is necessary to use the usrp-e-utility to recover the clock generator. -The recovery utility works by loading a special pass-through FPGA image so the computer -can talk directly to the clock generator over a SPI interface. - -Run the following commands to restore the clock generator to a usable state: -:: - - cd <install-path>/share/uhd/usrp_e_utilities - ./usrp-e-utility --fpga=../images/usrp_e100_pt_fpga.bin --reclk - - ------------------------------------------------------------------------ Clock Synchronization ------------------------------------------------------------------------ diff --git a/host/lib/usrp/CMakeLists.txt b/host/lib/usrp/CMakeLists.txt index 80f4bf45e..45498e3b4 100644 --- a/host/lib/usrp/CMakeLists.txt +++ b/host/lib/usrp/CMakeLists.txt @@ -38,4 +38,4 @@ INCLUDE_SUBDIRECTORY(fx2) INCLUDE_SUBDIRECTORY(usrp1) INCLUDE_SUBDIRECTORY(usrp2) INCLUDE_SUBDIRECTORY(b100) -INCLUDE_SUBDIRECTORY(usrp_e100) +INCLUDE_SUBDIRECTORY(e100) diff --git a/host/lib/usrp/b100/CMakeLists.txt b/host/lib/usrp/b100/CMakeLists.txt index e1618a49c..28429c186 100644 --- a/host/lib/usrp/b100/CMakeLists.txt +++ b/host/lib/usrp/b100/CMakeLists.txt @@ -1,5 +1,5 @@ # -# Copyright 2010-2011 Ettus Research LLC +# Copyright 2011 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/b100_ctrl.cpp b/host/lib/usrp/b100/b100_ctrl.cpp index 40b6435ac..6d415facc 100644 --- a/host/lib/usrp/b100/b100_ctrl.cpp +++ b/host/lib/usrp/b100/b100_ctrl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -195,7 +195,7 @@ void b100_ctrl_impl::viking_marauder_loop(boost::barrier &spawn_barrier) { const boost::uint32_t *vrt_hdr = rbuf->cast<const boost::uint32_t *>(); vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info); - if( if_packet_info.sid == 0 + if( if_packet_info.sid == B100_ASYNC_SID and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ //fill in the async metadata async_metadata_t metadata; @@ -205,21 +205,18 @@ void b100_ctrl_impl::viking_marauder_loop(boost::barrier &spawn_barrier) { time_t(if_packet_info.tsi), size_t(if_packet_info.tsf), 64e6 //FIXME get from clock_ctrl ); metadata.event_code = async_metadata_t::event_code_t(sph::get_context_code(vrt_hdr, if_packet_info)); - //print the famous U, and push the metadata into the message queue - if (metadata.event_code & + async_msg_fifo.push_with_pop_on_full(metadata); + if (metadata.event_code & ( async_metadata_t::EVENT_CODE_UNDERFLOW - | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET) ) - UHD_MSG(fastpath) << "U"; - - if (metadata.event_code & + | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET) + ) UHD_MSG(fastpath) << "U"; + else if (metadata.event_code & ( async_metadata_t::EVENT_CODE_SEQ_ERROR - | async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST) ) - UHD_MSG(fastpath) << "S"; - - async_msg_fifo.push_with_pop_on_full(metadata); + | async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST) + ) UHD_MSG(fastpath) << "S"; continue; } - throw uhd::runtime_error("Control: unknown async response"); + UHD_MSG(error) << "Control: unknown async response" << std::endl; } } } diff --git a/host/lib/usrp/b100/b100_ctrl.hpp b/host/lib/usrp/b100/b100_ctrl.hpp index ae706dbb4..17887181d 100644 --- a/host/lib/usrp/b100/b100_ctrl.hpp +++ b/host/lib/usrp/b100/b100_ctrl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/b100_iface.cpp b/host/lib/usrp/b100/b100_iface.cpp index 17ea2e6ad..402560c33 100644 --- a/host/lib/usrp/b100/b100_iface.cpp +++ b/host/lib/usrp/b100/b100_iface.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -15,7 +15,7 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "b100_iface.hpp" +#include "b100_impl.hpp" #include "usrp_commands.h" #include <uhd/exception.hpp> #include <uhd/utils/byteswap.hpp> @@ -38,8 +38,6 @@ using namespace uhd::transport; * Constants **********************************************************************/ static const bool iface_debug = true; -static const boost::uint16_t USRP_B_FW_COMPAT_NUM = 0x02; -static const boost::uint16_t USRP_B_FPGA_COMPAT_NUM = 0x03; /*********************************************************************** * I2C + FX2 implementation wrapper @@ -117,21 +115,21 @@ public: const boost::uint16_t fw_compat_num = _fx2_ctrl->usrp_control_read( VRQ_FW_COMPAT, 0, 0, data, sizeof(data) ); - if (fw_compat_num != USRP_B_FW_COMPAT_NUM){ + if (fw_compat_num != B100_FW_COMPAT_NUM){ throw uhd::runtime_error(str(boost::format( "Expected firmware compatibility number 0x%x, but got 0x%x:\n" "The firmware build is not compatible with the host code build." - ) % USRP_B_FW_COMPAT_NUM % fw_compat_num)); + ) % B100_FW_COMPAT_NUM % fw_compat_num)); } } void check_fpga_compat(void){ const boost::uint16_t fpga_compat_num = this->peek16(B100_REG_MISC_COMPAT); - if (fpga_compat_num != USRP_B_FPGA_COMPAT_NUM){ + if (fpga_compat_num != B100_FPGA_COMPAT_NUM){ throw uhd::runtime_error(str(boost::format( "Expected FPGA compatibility number 0x%x, but got 0x%x:\n" "The FPGA build is not compatible with the host code build." - ) % USRP_B_FPGA_COMPAT_NUM % fpga_compat_num)); + ) % B100_FPGA_COMPAT_NUM % fpga_compat_num)); } } diff --git a/host/lib/usrp/b100/b100_iface.hpp b/host/lib/usrp/b100/b100_iface.hpp index 57ed6a45c..a98db98dc 100644 --- a/host/lib/usrp/b100/b100_iface.hpp +++ b/host/lib/usrp/b100/b100_iface.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -45,6 +45,11 @@ public: b100_ctrl::sptr fpga_ctrl = b100_ctrl::sptr() ); + //! TODO implement this for multiple hardwares revs in the future + std::string get_cname(void){ + return "USRP-B100"; + } + /*! * Reset the GPIF interface on the FX2 * \param which endpoint to reset diff --git a/host/lib/usrp/b100/b100_impl.cpp b/host/lib/usrp/b100/b100_impl.cpp index 7e733ddd9..db7c585d7 100644 --- a/host/lib/usrp/b100/b100_impl.cpp +++ b/host/lib/usrp/b100/b100_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -72,7 +72,7 @@ static device_addrs_t b100_find(const device_addr_t &hint) //extract the firmware path for the b100 std::string b100_fw_image; try{ - b100_fw_image = find_image_path(hint.get("fw", "usrp_b100_fw.ihx")); + b100_fw_image = find_image_path(hint.get("fw", B100_FW_FILE_NAME)); } catch(...){ UHD_MSG(warning) << boost::format( @@ -132,7 +132,7 @@ static device::sptr b100_make(const device_addr_t &device_addr){ //extract the FPGA path for the B100 std::string b100_fpga_image = find_image_path( - device_addr.has_key("fpga")? device_addr["fpga"] : "usrp_b100_fpga.bin" + device_addr.has_key("fpga")? device_addr["fpga"] : B100_FPGA_FILE_NAME ); //try to match the given device address with something on the USB bus @@ -203,6 +203,14 @@ b100_impl::b100_impl(uhd::transport::usb_zero_copy::sptr data_transport, const double master_clock_rate) : _data_transport(data_transport), _fx2_ctrl(fx2_ctrl) { + _recv_otw_type.width = 16; + _recv_otw_type.shift = 0; + _recv_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + _send_otw_type.width = 16; + _send_otw_type.shift = 0; + _send_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + //this is the handler object for FPGA control packets _fpga_ctrl = b100_ctrl::make(ctrl_transport); @@ -224,10 +232,7 @@ b100_impl::b100_impl(uhd::transport::usb_zero_copy::sptr data_transport, dboard_init(); //initialize the dsps - rx_ddc_init(); - - //initialize the dsps - tx_duc_init(); + dsp_init(); //init the subdev specs this->mboard_set(MBOARD_PROP_RX_SUBDEV_SPEC, subdev_spec_t()); diff --git a/host/lib/usrp/b100/b100_impl.hpp b/host/lib/usrp/b100/b100_impl.hpp index daec70bca..2cea57eb5 100644 --- a/host/lib/usrp/b100/b100_impl.hpp +++ b/host/lib/usrp/b100/b100_impl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -34,6 +34,15 @@ #ifndef INCLUDED_B100_IMPL_HPP #define INCLUDED_B100_IMPL_HPP +static const std::string B100_FW_FILE_NAME = "usrp_b100_fw.bin"; +static const std::string B100_FPGA_FILE_NAME = "usrp_b100_fpga.bin"; +static const boost::uint16_t B100_FW_COMPAT_NUM = 0x02; +static const boost::uint16_t B100_FPGA_COMPAT_NUM = 0x05; +static const size_t B100_NUM_RX_DSPS = 2; +static const size_t B100_NUM_TX_DSPS = 1; +static const boost::uint32_t B100_DSP_SID_BASE = 2; //leave room for other dsp (increments by 1) +static const boost::uint32_t B100_ASYNC_SID = 1; + /*! * Make a b100 dboard interface. * \param iface the b100 interface object @@ -113,9 +122,8 @@ private: //handle io stuff uhd::transport::zero_copy_if::sptr _data_transport; UHD_PIMPL_DECL(io_impl) _io_impl; - void update_transport_channel_mapping(void); + void update_xport_channel_mapping(void); void io_init(void); - void issue_stream_cmd(const uhd::stream_cmd_t &stream_cmd); void handle_overrun(size_t); //otw types @@ -181,19 +189,20 @@ private: void tx_dboard_set(const wax::obj &, const wax::obj &); wax_obj_proxy::sptr _tx_dboard_proxy; - //rx ddc functions and settings - void rx_ddc_init(void); - void rx_ddc_get(const wax::obj &, wax::obj &); - void rx_ddc_set(const wax::obj &, const wax::obj &); - double _ddc_freq; size_t _ddc_decim; - wax_obj_proxy::sptr _rx_ddc_proxy; - - //tx duc functions and settings - void tx_duc_init(void); - void tx_duc_get(const wax::obj &, wax::obj &); - void tx_duc_set(const wax::obj &, const wax::obj &); - double _duc_freq; size_t _duc_interp; - wax_obj_proxy::sptr _tx_duc_proxy; + //methods and shadows for the dsps + UHD_PIMPL_DECL(dsp_impl) _dsp_impl; + void dsp_init(void); + void issue_ddc_stream_cmd(const uhd::stream_cmd_t &, size_t); + + //properties interface for ddc + void ddc_get(const wax::obj &, wax::obj &, size_t); + void ddc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _rx_dsp_proxies; + + //properties interface for duc + void duc_get(const wax::obj &, wax::obj &, size_t); + void duc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _tx_dsp_proxies; //transports b100_ctrl::sptr _fpga_ctrl; diff --git a/host/lib/usrp/b100/b100_regs.hpp b/host/lib/usrp/b100/b100_regs.hpp index 010df283e..06288e875 100644 --- a/host/lib/usrp/b100/b100_regs.hpp +++ b/host/lib/usrp/b100/b100_regs.hpp @@ -17,7 +17,6 @@ // Slave pointers #define B100_REG_SLAVE(n) ((n)<<7) -#define B100_REG_SR_ADDR(n) ((B100_REG_SETTINGS_BASE) + (4*(n))) ///////////////////////////////////////////////////// // Slave 0 -- Misc Regs @@ -164,86 +163,113 @@ // Output-only, no readback, 64 registers total // Each register must be written 32 bits at a time // First the address xxx_xx00 and then xxx_xx10 +// 64 total regs in address space +#define B100_SR_RX_CTRL0 0 // 9 regs (+0 to +8) +#define B100_SR_RX_DSP0 10 // 4 regs (+0 to +3) +#define B100_SR_RX_CTRL1 16 // 9 regs (+0 to +8) +#define B100_SR_RX_DSP1 26 // 4 regs (+0 to +3) +#define B100_SR_TX_CTRL 32 // 4 regs (+0 to +3) +#define B100_SR_TX_DSP 38 // 3 regs (+0 to +2) -#define B100_REG_SETTINGS_BASE_ADDR(n) (B100_REG_SLAVE(8) + (4*(n))) +#define B100_SR_TIME64 42 // 6 regs (+0 to +5) +#define B100_SR_RX_FRONT 48 // 5 regs (+0 to +4) +#define B100_SR_TX_FRONT 54 // 5 regs (+0 to +4) -#define B100_REG_SR_MISC_TEST32 B100_REG_SETTINGS_BASE_ADDR(52) +#define B100_SR_REG_TEST32 60 // 1 reg +#define B100_SR_CLEAR_RX_FIFO 61 // 1 reg +#define B100_SR_CLEAR_TX_FIFO 62 // 1 reg +#define B100_SR_GLOBAL_RESET 63 // 1 reg + +#define B100_REG_SR_ADDR(n) (B100_REG_SLAVE(8) + (4*(n))) + +#define B100_REG_SR_MISC_TEST32 B100_REG_SR_ADDR(B100_SR_REG_TEST32) + +///////////////////////////////////////////////// +// Magic reset regs +//////////////////////////////////////////////// +#define B100_REG_CLEAR_RX B100_REG_SR_ADDR(B100_SR_CLEAR_RX_FIFO) +#define B100_REG_CLEAR_TX B100_REG_SR_ADDR(B100_SR_CLEAR_RX_FIFO) +#define B100_REG_GLOBAL_RESET B100_REG_SR_ADDR(B100_SR_GLOBAL_RESET) ///////////////////////////////////////////////// // DSP RX Regs //////////////////////////////////////////////// -#define B100_REG_DSP_RX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(16) + (4*(n))) -#define B100_REG_DSP_RX_FREQ B100_REG_DSP_RX_ADDR(0) -#define B100_REG_DSP_RX_SCALE_IQ B100_REG_DSP_RX_ADDR(1) // {scale_i,scale_q} -#define B100_REG_DSP_RX_DECIM_RATE B100_REG_DSP_RX_ADDR(2) // hb and decim rate -#define B100_REG_DSP_RX_DCOFFSET_I B100_REG_DSP_RX_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic -#define B100_REG_DSP_RX_DCOFFSET_Q B100_REG_DSP_RX_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits -#define B100_REG_DSP_RX_MUX B100_REG_DSP_RX_ADDR(5) +#define B100_REG_DSP_RX_HELPER(which, offset) ((which == 0)? \ + (B100_REG_SR_ADDR(B100_SR_RX_DSP0 + offset)) : \ + (B100_REG_SR_ADDR(B100_SR_RX_DSP1 + offset))) + +#define B100_REG_DSP_RX_FREQ(which) B100_REG_DSP_RX_HELPER(which, 0) +#define B100_REG_DSP_RX_DECIM(which) B100_REG_DSP_RX_HELPER(which, 2) +#define B100_REG_DSP_RX_MUX(which) B100_REG_DSP_RX_HELPER(which, 3) + +#define B100_FLAG_DSP_RX_MUX_SWAP_IQ (1 << 0) +#define B100_FLAG_DSP_RX_MUX_REAL_MODE (1 << 1) /////////////////////////////////////////////////// -// VITA RX CTRL regs +// RX CTRL regs /////////////////////////////////////////////////// -// The following 3 are logically a single command register. -// They are clocked into the underlying fifo when time_ticks is written. -#define B100_REG_CTRL_RX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(0) + (4*(n))) -#define B100_REG_CTRL_RX_STREAM_CMD B100_REG_CTRL_RX_ADDR(0) // {now, chain, num_samples(30) -#define B100_REG_CTRL_RX_TIME_SECS B100_REG_CTRL_RX_ADDR(1) -#define B100_REG_CTRL_RX_TIME_TICKS B100_REG_CTRL_RX_ADDR(2) -#define B100_REG_CTRL_RX_CLEAR_OVERRUN B100_REG_CTRL_RX_ADDR(3) // write anything to clear overrun -#define B100_REG_CTRL_RX_VRT_HEADER B100_REG_CTRL_RX_ADDR(4) // word 0 of packet. FPGA fills in packet counter -#define B100_REG_CTRL_RX_VRT_STREAM_ID B100_REG_CTRL_RX_ADDR(5) // word 1 of packet. -#define B100_REG_CTRL_RX_VRT_TRAILER B100_REG_CTRL_RX_ADDR(6) -#define B100_REG_CTRL_RX_NSAMPS_PER_PKT B100_REG_CTRL_RX_ADDR(7) -#define B100_REG_CTRL_RX_NCHANNELS B100_REG_CTRL_RX_ADDR(8) // 1 in basic case, up to 4 for vector sources +#define B100_REG_RX_CTRL_HELPER(which, offset) ((which == 0)? \ + (B100_REG_SR_ADDR(B100_SR_RX_CTRL0 + offset)) : \ + (B100_REG_SR_ADDR(B100_SR_RX_CTRL1 + offset))) + +#define B100_REG_RX_CTRL_STREAM_CMD(which) B100_REG_RX_CTRL_HELPER(which, 0) +#define B100_REG_RX_CTRL_TIME_SECS(which) B100_REG_RX_CTRL_HELPER(which, 1) +#define B100_REG_RX_CTRL_TIME_TICKS(which) B100_REG_RX_CTRL_HELPER(which, 2) +#define B100_REG_RX_CTRL_CLEAR(which) B100_REG_RX_CTRL_HELPER(which, 3) +#define B100_REG_RX_CTRL_VRT_HDR(which) B100_REG_RX_CTRL_HELPER(which, 4) +#define B100_REG_RX_CTRL_VRT_SID(which) B100_REG_RX_CTRL_HELPER(which, 5) +#define B100_REG_RX_CTRL_VRT_TLR(which) B100_REG_RX_CTRL_HELPER(which, 6) +#define B100_REG_RX_CTRL_NSAMPS_PP(which) B100_REG_RX_CTRL_HELPER(which, 7) +#define B100_REG_RX_CTRL_NCHANNELS(which) B100_REG_RX_CTRL_HELPER(which, 8) ///////////////////////////////////////////////// -// DSP TX Regs +// RX FE //////////////////////////////////////////////// -#define B100_REG_DSP_TX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(32) + (4*(n))) -#define B100_REG_DSP_TX_FREQ B100_REG_DSP_TX_ADDR(0) -#define B100_REG_DSP_TX_SCALE_IQ B100_REG_DSP_TX_ADDR(1) // {scale_i,scale_q} -#define B100_REG_DSP_TX_INTERP_RATE B100_REG_DSP_TX_ADDR(2) -#define B100_REG_DSP_TX_UNUSED B100_REG_DSP_TX_ADDR(3) -#define B100_REG_DSP_TX_MUX B100_REG_DSP_TX_ADDR(4) +#define B100_REG_RX_FE_SWAP_IQ B100_REG_SR_ADDR(B100_SR_RX_FRONT + 0) //lower bit +#define B100_REG_RX_FE_MAG_CORRECTION B100_REG_SR_ADDR(B100_SR_RX_FRONT + 1) //18 bits +#define B100_REG_RX_FE_PHASE_CORRECTION B100_REG_SR_ADDR(B100_SR_RX_FRONT + 2) //18 bits +#define B100_REG_RX_FE_OFFSET_I B100_REG_SR_ADDR(B100_SR_RX_FRONT + 3) //18 bits +#define B100_REG_RX_FE_OFFSET_Q B100_REG_SR_ADDR(B100_SR_RX_FRONT + 4) //18 bits ///////////////////////////////////////////////// -// VITA TX CTRL regs +// DSP TX Regs //////////////////////////////////////////////// -#define B100_REG_CTRL_TX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(24) + (4*(n))) -#define B100_REG_CTRL_TX_NCHANNELS B100_REG_CTRL_TX_ADDR(0) -#define B100_REG_CTRL_TX_CLEAR_UNDERRUN B100_REG_CTRL_TX_ADDR(1) -#define B100_REG_CTRL_TX_REPORT_SID B100_REG_CTRL_TX_ADDR(2) -#define B100_REG_CTRL_TX_POLICY B100_REG_CTRL_TX_ADDR(3) +#define B100_REG_DSP_TX_FREQ B100_REG_SR_ADDR(B100_SR_TX_DSP + 0) +#define B100_REG_DSP_TX_SCALE_IQ B100_REG_SR_ADDR(B100_SR_TX_DSP + 1) +#define B100_REG_DSP_TX_INTERP_RATE B100_REG_SR_ADDR(B100_SR_TX_DSP + 2) -#define B100_FLAG_CTRL_TX_POLICY_WAIT (0x1 << 0) -#define B100_FLAG_CTRL_TX_POLICY_NEXT_PACKET (0x1 << 1) -#define B100_FLAG_CTRL_TX_POLICY_NEXT_BURST (0x1 << 2) +/////////////////////////////////////////////////// +// TX CTRL regs +/////////////////////////////////////////////////// +#define B100_REG_TX_CTRL_NUM_CHAN B100_REG_SR_ADDR(B100_SR_TX_CTRL + 0) +#define B100_REG_TX_CTRL_CLEAR_STATE B100_REG_SR_ADDR(B100_SR_TX_CTRL + 1) +#define B100_REG_TX_CTRL_REPORT_SID B100_REG_SR_ADDR(B100_SR_TX_CTRL + 2) +#define B100_REG_TX_CTRL_POLICY B100_REG_SR_ADDR(B100_SR_TX_CTRL + 3) +#define B100_REG_TX_CTRL_CYCLES_PER_UP B100_REG_SR_ADDR(B100_SR_TX_CTRL + 4) +#define B100_REG_TX_CTRL_PACKETS_PER_UP B100_REG_SR_ADDR(B100_SR_TX_CTRL + 5) + +#define B100_FLAG_TX_CTRL_POLICY_WAIT (0x1 << 0) +#define B100_FLAG_TX_CTRL_POLICY_NEXT_PACKET (0x1 << 1) +#define B100_FLAG_TX_CTRL_POLICY_NEXT_BURST (0x1 << 2) + +///////////////////////////////////////////////// +// TX FE +//////////////////////////////////////////////// +#define B100_REG_TX_FE_DC_OFFSET_I B100_REG_SR_ADDR(B100_SR_TX_FRONT + 0) //24 bits +#define B100_REG_TX_FE_DC_OFFSET_Q B100_REG_SR_ADDR(B100_SR_TX_FRONT + 1) //24 bits +#define B100_REG_TX_FE_MAC_CORRECTION B100_REG_SR_ADDR(B100_SR_TX_FRONT + 2) //18 bits +#define B100_REG_TX_FE_PHASE_CORRECTION B100_REG_SR_ADDR(B100_SR_TX_FRONT + 3) //18 bits +#define B100_REG_TX_FE_MUX B100_REG_SR_ADDR(B100_SR_TX_FRONT + 4) //8 bits (std output = 0x10, reversed = 0x01) ///////////////////////////////////////////////// // VITA49 64 bit time (write only) //////////////////////////////////////////////// - /*! - * \brief Time 64 flags - * - * <pre> - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-----------------------------------------------------------+-+-+ - * | |S|P| - * +-----------------------------------------------------------+-+-+ - * - * P - PPS edge selection (0=negedge, 1=posedge, default=0) - * S - Source (0=sma, 1=mimo, 0=default) - * - * </pre> - */ -#define B100_REG_TIME64_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(40) + (4*(n))) -#define B100_REG_TIME64_SECS B100_REG_TIME64_ADDR(0) // value to set absolute secs to on next PPS -#define B100_REG_TIME64_TICKS B100_REG_TIME64_ADDR(1) // value to set absolute ticks to on next PPS -#define B100_REG_TIME64_FLAGS B100_REG_TIME64_ADDR(2) // flags - see chart above -#define B100_REG_TIME64_IMM B100_REG_TIME64_ADDR(3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) -#define B100_REG_TIME64_TPS B100_REG_TIME64_ADDR(4) // clock ticks per second (counter rollover) +#define B100_REG_TIME64_SECS B100_REG_SR_ADDR(B100_SR_TIME64 + 0) +#define B100_REG_TIME64_TICKS B100_REG_SR_ADDR(B100_SR_TIME64 + 1) +#define B100_REG_TIME64_FLAGS B100_REG_SR_ADDR(B100_SR_TIME64 + 2) +#define B100_REG_TIME64_IMM B100_REG_SR_ADDR(B100_SR_TIME64 + 3) +#define B100_REG_TIME64_TPS B100_REG_SR_ADDR(B100_SR_TIME64 + 4) +#define B100_REG_TIME64_MIMO_SYNC B100_REG_SR_ADDR(B100_SR_TIME64 + 5) //pps flags (see above) #define B100_FLAG_TIME64_PPS_NEGEDGE (0 << 0) @@ -254,11 +280,5 @@ #define B100_FLAG_TIME64_LATCH_NOW 1 #define B100_FLAG_TIME64_LATCH_NEXT_PPS 0 -#define B100_REG_CLEAR_RX_FIFO B100_REG_SETTINGS_BASE_ADDR(48) -#define B100_REG_CLEAR_TX_FIFO B100_REG_SETTINGS_BASE_ADDR(49) - -#define B100_REG_GLOBAL_RESET B100_REG_SETTINGS_BASE_ADDR(50) -#define B100_REG_TEST32 B100_REG_SETTINGS_BASE_ADDR(52) - #endif diff --git a/host/lib/usrp/b100/clock_ctrl.cpp b/host/lib/usrp/b100/clock_ctrl.cpp index e138242d1..02091f00a 100644 --- a/host/lib/usrp/b100/clock_ctrl.cpp +++ b/host/lib/usrp/b100/clock_ctrl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2011 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/clock_ctrl.hpp b/host/lib/usrp/b100/clock_ctrl.hpp index 2a2e74024..3a24f2a66 100644 --- a/host/lib/usrp/b100/clock_ctrl.hpp +++ b/host/lib/usrp/b100/clock_ctrl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/codec_ctrl.cpp b/host/lib/usrp/b100/codec_ctrl.cpp index 4d118b68b..7e9f355d4 100644 --- a/host/lib/usrp/b100/codec_ctrl.cpp +++ b/host/lib/usrp/b100/codec_ctrl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/codec_ctrl.hpp b/host/lib/usrp/b100/codec_ctrl.hpp index 1bd579190..9ef960592 100644 --- a/host/lib/usrp/b100/codec_ctrl.hpp +++ b/host/lib/usrp/b100/codec_ctrl.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/codec_impl.cpp b/host/lib/usrp/b100/codec_impl.cpp index de3ca3a66..a959c9d60 100644 --- a/host/lib/usrp/b100/codec_impl.cpp +++ b/host/lib/usrp/b100/codec_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/ctrl_packet.hpp b/host/lib/usrp/b100/ctrl_packet.hpp index f504fc5aa..bab1f0de1 100644 --- a/host/lib/usrp/b100/ctrl_packet.hpp +++ b/host/lib/usrp/b100/ctrl_packet.hpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/dboard_iface.cpp b/host/lib/usrp/b100/dboard_iface.cpp index ec3da6220..003d86d48 100644 --- a/host/lib/usrp/b100/dboard_iface.cpp +++ b/host/lib/usrp/b100/dboard_iface.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/dboard_impl.cpp b/host/lib/usrp/b100/dboard_impl.cpp index ba3776728..ed1d4bb1d 100644 --- a/host/lib/usrp/b100/dboard_impl.cpp +++ b/host/lib/usrp/b100/dboard_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by diff --git a/host/lib/usrp/b100/dsp_impl.cpp b/host/lib/usrp/b100/dsp_impl.cpp index c1bf6bedd..e27894c1a 100644 --- a/host/lib/usrp/b100/dsp_impl.cpp +++ b/host/lib/usrp/b100/dsp_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -22,36 +22,80 @@ #include <boost/math/special_functions/round.hpp> #include <boost/bind.hpp> -#define rint boost::math::iround - using namespace uhd; using namespace uhd::usrp; -static const double MASTER_CLOCK_RATE = 64e6; //TODO get from clock control +/*********************************************************************** + * DSP impl and methods + **********************************************************************/ +struct b100_impl::dsp_impl{ + uhd::dict<size_t, size_t> ddc_decim; + uhd::dict<size_t, double> ddc_freq; + uhd::dict<size_t, size_t> duc_interp; + uhd::dict<size_t, double> duc_freq; +}; /*********************************************************************** * RX DDC Initialization **********************************************************************/ -void b100_impl::rx_ddc_init(void){ - _rx_ddc_proxy = wax_obj_proxy::make( - boost::bind(&b100_impl::rx_ddc_get, this, _1, _2), - boost::bind(&b100_impl::rx_ddc_set, this, _1, _2) - ); - - //initial config and update - rx_ddc_set(DSP_PROP_FREQ_SHIFT, double(0)); - rx_ddc_set(DSP_PROP_HOST_RATE, double(16e6)); +void b100_impl::dsp_init(void){ + //create new dsp impl + _dsp_impl = UHD_PIMPL_MAKE(dsp_impl, ()); + + //bind and initialize the rx dsps + for (size_t i = 0; i < B100_NUM_RX_DSPS; i++){ + _rx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&b100_impl::ddc_get, this, _1, _2, i), + boost::bind(&b100_impl::ddc_set, this, _1, _2, i) + ); + + //initial config and update + ddc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + ddc_set(DSP_PROP_HOST_RATE, double(_clock_ctrl->get_fpga_clock_rate()/16), i); + + //setup the rx control registers + _iface->poke32(B100_REG_RX_CTRL_CLEAR(i), 1); //reset + _iface->poke32(B100_REG_RX_CTRL_NSAMPS_PP(i), this->get_max_recv_samps_per_packet()); + _iface->poke32(B100_REG_RX_CTRL_NCHANNELS(i), 1); + _iface->poke32(B100_REG_RX_CTRL_VRT_HDR(i), 0 + | (0x1 << 28) //if data with stream id + | (0x1 << 26) //has trailer + | (0x3 << 22) //integer time other + | (0x1 << 20) //fractional time sample count + ); + _iface->poke32(B100_REG_RX_CTRL_VRT_SID(i), B100_DSP_SID_BASE + i); + _iface->poke32(B100_REG_RX_CTRL_VRT_TLR(i), 0); + _iface->poke32(B100_REG_TIME64_TPS, size_t(_clock_ctrl->get_fpga_clock_rate())); + } + + //bind and initialize the tx dsps + for (size_t i = 0; i < B100_NUM_TX_DSPS; i++){ + _tx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&b100_impl::duc_get, this, _1, _2, i), + boost::bind(&b100_impl::duc_set, this, _1, _2, i) + ); + + //initial config and update + duc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + duc_set(DSP_PROP_HOST_RATE, double(_clock_ctrl->get_fpga_clock_rate()/16), i); + + //init the tx control registers + _iface->poke32(B100_REG_TX_CTRL_CLEAR_STATE, 1); //reset + _iface->poke32(B100_REG_TX_CTRL_NUM_CHAN, 0); //1 channel + _iface->poke32(B100_REG_TX_CTRL_REPORT_SID, B100_ASYNC_SID); + _iface->poke32(B100_REG_TX_CTRL_POLICY, B100_FLAG_TX_CTRL_POLICY_NEXT_PACKET); + } } /*********************************************************************** * RX DDC Get **********************************************************************/ -void b100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ +void b100_impl::ddc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ case DSP_PROP_NAME: - val = std::string("USRP-B100 RX DSP"); + val = str(boost::format("%s ddc%d") % _iface->get_cname() % which_dsp); return; case DSP_PROP_OTHERS: @@ -59,7 +103,7 @@ void b100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_FREQ_SHIFT: - val = _ddc_freq; + val = _dsp_impl->ddc_freq[which_dsp]; return; case DSP_PROP_CODEC_RATE: @@ -67,7 +111,7 @@ void b100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_HOST_RATE: - val = _clock_ctrl->get_fpga_clock_rate()/_ddc_decim; + val = _clock_ctrl->get_fpga_clock_rate()/_dsp_impl->ddc_decim[which_dsp]; return; default: UHD_THROW_PROP_GET_ERROR(); @@ -77,34 +121,31 @@ void b100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * RX DDC Set **********************************************************************/ -void b100_impl::rx_ddc_set(const wax::obj &key_, const wax::obj &val){ +void b100_impl::ddc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ + case DSP_PROP_STREAM_CMD: - issue_stream_cmd(val.as<stream_cmd_t>()); + issue_ddc_stream_cmd(val.as<stream_cmd_t>(), which_dsp); return; case DSP_PROP_FREQ_SHIFT:{ double new_freq = val.as<double>(); - _iface->poke32(B100_REG_DSP_RX_FREQ, + _iface->poke32(B100_REG_DSP_RX_FREQ(which_dsp), dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) ); - _ddc_freq = new_freq; //shadow + _dsp_impl->ddc_freq[which_dsp] = new_freq; //shadow } return; case DSP_PROP_HOST_RATE:{ - //set the decimation - _ddc_decim = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); - _iface->poke32(B100_REG_DSP_RX_DECIM_RATE, dsp_type1::calc_cic_filter_word(_ddc_decim)); + _dsp_impl->ddc_decim[which_dsp] = boost::math::iround(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); - //set the scaling - static const boost::int16_t default_rx_scale_iq = 1024; - _iface->poke32(B100_REG_DSP_RX_SCALE_IQ, - dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) - ); + //set the decimation + _iface->poke32(B100_REG_DSP_RX_DECIM(which_dsp), dsp_type1::calc_cic_filter_word(_dsp_impl->ddc_decim[which_dsp])); } + this->update_xport_channel_mapping(); //rate changed -> update return; default: UHD_THROW_PROP_SET_ERROR(); @@ -112,28 +153,14 @@ void b100_impl::rx_ddc_set(const wax::obj &key_, const wax::obj &val){ } /*********************************************************************** - * TX DUC Initialization - **********************************************************************/ -void b100_impl::tx_duc_init(void){ - _tx_duc_proxy = wax_obj_proxy::make( - boost::bind(&b100_impl::tx_duc_get, this, _1, _2), - boost::bind(&b100_impl::tx_duc_set, this, _1, _2) - ); - - //initial config and update - tx_duc_set(DSP_PROP_FREQ_SHIFT, double(0)); - tx_duc_set(DSP_PROP_HOST_RATE, double(16e6)); -} - -/*********************************************************************** * TX DUC Get **********************************************************************/ -void b100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ +void b100_impl::duc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ case DSP_PROP_NAME: - val = std::string("USRP-B100 TX DSP"); + val = str(boost::format("%s duc%d") % _iface->get_cname() % which_dsp); return; case DSP_PROP_OTHERS: @@ -141,7 +168,7 @@ void b100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_FREQ_SHIFT: - val = _duc_freq; + val = _dsp_impl->duc_freq[which_dsp]; return; case DSP_PROP_CODEC_RATE: @@ -149,7 +176,7 @@ void b100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ return; case DSP_PROP_HOST_RATE: - val = _clock_ctrl->get_fpga_clock_rate()/_duc_interp; + val = _clock_ctrl->get_fpga_clock_rate()/_dsp_impl->duc_interp[which_dsp]; return; default: UHD_THROW_PROP_GET_ERROR(); @@ -159,7 +186,7 @@ void b100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * TX DUC Set **********************************************************************/ -void b100_impl::tx_duc_set(const wax::obj &key_, const wax::obj &val){ +void b100_impl::duc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ named_prop_t key = named_prop_t::extract(key_); switch(key.as<dsp_prop_t>()){ @@ -169,19 +196,20 @@ void b100_impl::tx_duc_set(const wax::obj &key_, const wax::obj &val){ _iface->poke32(B100_REG_DSP_TX_FREQ, dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) ); - _duc_freq = new_freq; //shadow + _dsp_impl->duc_freq[which_dsp] = new_freq; //shadow } return; case DSP_PROP_HOST_RATE:{ - _duc_interp = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); + _dsp_impl->duc_interp[which_dsp] = boost::math::iround(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); //set the interpolation - _iface->poke32(B100_REG_DSP_TX_INTERP_RATE, dsp_type1::calc_cic_filter_word(_duc_interp)); + _iface->poke32(B100_REG_DSP_TX_INTERP_RATE, dsp_type1::calc_cic_filter_word(_dsp_impl->duc_interp[which_dsp])); //set the scaling - _iface->poke32(B100_REG_DSP_TX_SCALE_IQ, dsp_type1::calc_iq_scale_word(_duc_interp)); + _iface->poke32(B100_REG_DSP_TX_SCALE_IQ, dsp_type1::calc_iq_scale_word(_dsp_impl->duc_interp[which_dsp])); } + this->update_xport_channel_mapping(); //rate changed -> update return; default: UHD_THROW_PROP_SET_ERROR(); diff --git a/host/lib/usrp/b100/io_impl.cpp b/host/lib/usrp/b100/io_impl.cpp index 3978bea75..5377c43d5 100644 --- a/host/lib/usrp/b100/io_impl.cpp +++ b/host/lib/usrp/b100/io_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -45,17 +45,45 @@ struct b100_impl::io_impl{ io_impl(zero_copy_if::sptr data_transport): data_transport(data_transport) { - /* NOP */ + for (size_t i = 0; i < B100_NUM_RX_DSPS; i++){ + typedef bounded_buffer<managed_recv_buffer::sptr> buffs_queue_type; + _buffs_queue.push_back(new buffs_queue_type(data_transport->get_num_recv_frames())); + } } ~io_impl(void){ - //drain the rx buffs - //while(data_transport->get_recv_buff().get() != NULL){ - /* NOP */ - //} + for (size_t i = 0; i < _buffs_queue.size(); i++){ + delete _buffs_queue[i]; + } } - zero_copy_if::sptr &data_transport; + zero_copy_if::sptr data_transport; + + std::vector<bounded_buffer<managed_recv_buffer::sptr> *> _buffs_queue; + + //gets buffer, determines if its the requested index, + //and either queues the buffer or returns the buffer + managed_recv_buffer::sptr get_recv_buff(const size_t index, const double timeout){ + while (true){ + managed_recv_buffer::sptr buff; + + //attempt to pop a buffer from the queue + if (_buffs_queue[index]->pop_with_haste(buff)) return buff; + + //otherwise, call into the transport + buff = data_transport->get_recv_buff(timeout); + if (buff.get() == NULL) return buff; //timeout + + //check the stream id to know which channel + const boost::uint32_t *vrt_hdr = buff->cast<const boost::uint32_t *>(); + const size_t rx_index = uhd::wtohx(vrt_hdr[1]) - B100_DSP_SID_BASE; + if (rx_index == index) return buff; //got expected message + + //otherwise queue and try again + if (rx_index < B100_NUM_RX_DSPS) _buffs_queue[rx_index]->push_with_pop_on_full(buff); + else UHD_MSG(error) << "Got a data packet with known SID " << uhd::wtohx(vrt_hdr[1]) << std::endl; + } + } sph::recv_packet_handler recv_handler; sph::send_packet_handler send_handler; @@ -66,46 +94,17 @@ struct b100_impl::io_impl{ * Initialize internals within this file **********************************************************************/ void b100_impl::io_init(void){ - _recv_otw_type.width = 16; - _recv_otw_type.shift = 0; - _recv_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; - - _send_otw_type.width = 16; - _send_otw_type.shift = 0; - _send_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; - _iface->reset_gpif(6); - //reset state machines - _iface->poke32(B100_REG_CTRL_TX_CLEAR_UNDERRUN, 0); - _iface->poke32(B100_REG_CTRL_RX_CLEAR_OVERRUN, 0); - _io_impl = UHD_PIMPL_MAKE(io_impl, (_data_transport)); - - //setup rx data path - _iface->poke32(B100_REG_CTRL_RX_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); - UHD_LOGV(always) << "IO: Using " << get_max_recv_samps_per_packet() << " samples per packet" << std::endl; - _iface->poke32(B100_REG_CTRL_RX_NCHANNELS, 1); - _iface->poke32(B100_REG_CTRL_RX_VRT_HEADER, 0 - | (0x1 << 28) //if data with stream id - | (0x1 << 26) //has trailer - | (0x3 << 22) //integer time other - | (0x1 << 20) //fractional time sample count - ); - _iface->poke32(B100_REG_CTRL_RX_VRT_TRAILER, 0); - //set the streamid to reset the seq num - _iface->poke32(B100_REG_CTRL_TX_REPORT_SID, 0); - //setup the tx policy - _iface->poke32(B100_REG_CTRL_TX_POLICY, B100_FLAG_CTRL_TX_POLICY_NEXT_PACKET); - //set the expected packet size in USB frames _iface->poke32(B100_REG_MISC_RX_LEN, 4); - update_transport_channel_mapping(); + update_xport_channel_mapping(); } -void b100_impl::update_transport_channel_mapping(void){ +void b100_impl::update_xport_channel_mapping(void){ if (_io_impl.get() == NULL) return; //not inited yet //set all of the relevant properties on the handler @@ -113,10 +112,11 @@ void b100_impl::update_transport_channel_mapping(void){ _io_impl->recv_handler.resize(_rx_subdev_spec.size()); _io_impl->recv_handler.set_vrt_unpacker(&vrt::if_hdr_unpack_le); _io_impl->recv_handler.set_tick_rate(_clock_ctrl->get_fpga_clock_rate()); - _io_impl->recv_handler.set_samp_rate(_rx_ddc_proxy->get_link()[DSP_PROP_HOST_RATE].as<double>()); + //FIXME assumes homogeneous rates across all dsp + _io_impl->recv_handler.set_samp_rate(_rx_dsp_proxies[_rx_dsp_proxies.keys().at(0)]->get_link()[DSP_PROP_HOST_RATE].as<double>()); for (size_t chan = 0; chan < _io_impl->recv_handler.size(); chan++){ _io_impl->recv_handler.set_xport_chan_get_buff(chan, boost::bind( - &uhd::transport::zero_copy_if::get_recv_buff, _io_impl->data_transport, _1 + &b100_impl::io_impl::get_recv_buff, _io_impl.get(), chan, _1 )); _io_impl->recv_handler.set_overflow_handler(chan, boost::bind( &b100_impl::handle_overrun, this, chan @@ -129,7 +129,8 @@ void b100_impl::update_transport_channel_mapping(void){ _io_impl->send_handler.resize(_tx_subdev_spec.size()); _io_impl->send_handler.set_vrt_packer(&vrt::if_hdr_pack_le); _io_impl->send_handler.set_tick_rate(_clock_ctrl->get_fpga_clock_rate()); - _io_impl->send_handler.set_samp_rate(_tx_duc_proxy->get_link()[DSP_PROP_HOST_RATE].as<double>()); + //FIXME assumes homogeneous rates across all dsp + _io_impl->send_handler.set_samp_rate(_tx_dsp_proxies[_tx_dsp_proxies.keys().at(0)]->get_link()[DSP_PROP_HOST_RATE].as<double>()); for (size_t chan = 0; chan < _io_impl->send_handler.size(); chan++){ _io_impl->send_handler.set_xport_chan_get_buff(chan, boost::bind( &uhd::transport::zero_copy_if::get_send_buff, _io_impl->data_transport, _1 @@ -155,7 +156,7 @@ size_t b100_impl::send( const send_buffs_type &buffs, size_t nsamps_per_buff, const tx_metadata_t &metadata, const io_type_t &io_type, send_mode_t send_mode, double timeout -){ +){ return _io_impl->send_handler.send( buffs, nsamps_per_buff, metadata, io_type, @@ -189,13 +190,13 @@ size_t b100_impl::recv( ); } -void b100_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd) +void b100_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd, size_t index) { _io_impl->continuous_streaming = (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS); - _iface->poke32(B100_REG_CTRL_RX_STREAM_CMD, dsp_type1::calc_stream_cmd_word(stream_cmd)); - _iface->poke32(B100_REG_CTRL_RX_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); - _iface->poke32(B100_REG_CTRL_RX_TIME_TICKS, stream_cmd.time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); - + _iface->poke32(B100_REG_RX_CTRL_STREAM_CMD(index), dsp_type1::calc_stream_cmd_word(stream_cmd)); + _iface->poke32(B100_REG_RX_CTRL_TIME_SECS(index), boost::uint32_t(stream_cmd.time_spec.get_full_secs())); + _iface->poke32(B100_REG_RX_CTRL_TIME_TICKS(index), stream_cmd.time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); + if (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS) { while(_io_impl->data_transport->get_recv_buff().get() != NULL){ /* NOP */ @@ -203,8 +204,8 @@ void b100_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd) } } -void b100_impl::handle_overrun(size_t){ +void b100_impl::handle_overrun(size_t index){ if (_io_impl->continuous_streaming){ - this->issue_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS, index); } } diff --git a/host/lib/usrp/b100/mboard_impl.cpp b/host/lib/usrp/b100/mboard_impl.cpp index c651ff2a2..4f7dc8fce 100644 --- a/host/lib/usrp/b100/mboard_impl.cpp +++ b/host/lib/usrp/b100/mboard_impl.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2011 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -85,11 +85,12 @@ void b100_impl::update_clock_config(void){ **********************************************************************/ void b100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); + static const std::string dboard_name = "A"; //handle the get request conditioned on the key switch(key.as<mboard_prop_t>()){ case MBOARD_PROP_NAME: - val = std::string("USRP-B100 mboard"); + val = std::string(_iface->get_cname() + " mboard"); return; case MBOARD_PROP_OTHERS: @@ -97,39 +98,37 @@ void b100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_RX_DBOARD: - UHD_ASSERT_THROW(key.name == ""); + UHD_ASSERT_THROW(key.name == dboard_name); val = _rx_dboard_proxy->get_link(); return; case MBOARD_PROP_RX_DBOARD_NAMES: - val = prop_names_t(1, ""); //vector of size 1 with empty string + val = prop_names_t(1, dboard_name); return; case MBOARD_PROP_TX_DBOARD: - UHD_ASSERT_THROW(key.name == ""); + UHD_ASSERT_THROW(key.name == dboard_name); val = _tx_dboard_proxy->get_link(); return; case MBOARD_PROP_TX_DBOARD_NAMES: - val = prop_names_t(1, ""); //vector of size 1 with empty string + val = prop_names_t(1, dboard_name); return; case MBOARD_PROP_RX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _rx_ddc_proxy->get_link(); + val = _rx_dsp_proxies[key.name]->get_link(); return; case MBOARD_PROP_RX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _rx_dsp_proxies.keys(); return; case MBOARD_PROP_TX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _tx_duc_proxy->get_link(); + val = _tx_dsp_proxies[key.name]->get_link(); return; case MBOARD_PROP_TX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _tx_dsp_proxies.keys(); return; case MBOARD_PROP_CLOCK_CONFIG: @@ -198,22 +197,59 @@ void b100_impl::mboard_set(const wax::obj &key, const wax::obj &val) } return; - case MBOARD_PROP_RX_SUBDEV_SPEC: + case MBOARD_PROP_RX_SUBDEV_SPEC:{ _rx_subdev_spec = val.as<subdev_spec_t>(); verify_rx_subdev_spec(_rx_subdev_spec, _mboard_proxy->get_link()); - UHD_ASSERT_THROW(_rx_subdev_spec.size() == 1); - //set the mux - _iface->poke32(B100_REG_DSP_RX_MUX, dsp_type1::calc_rx_mux_word( - _dboard_manager->get_rx_subdev(_rx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() - )); - return; + //sanity check + UHD_ASSERT_THROW(_rx_subdev_spec.size() <= B100_NUM_RX_DSPS); + + //determine frontend swap IQ from the first channel + bool fe_swap_iq = false; + switch(_dboard_manager->get_rx_subdev(_rx_subdev_spec.at(0).sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>()){ + case SUBDEV_CONN_COMPLEX_QI: + case SUBDEV_CONN_REAL_Q: + fe_swap_iq = true; + break; + default: fe_swap_iq = false; + } + _iface->poke32(B100_REG_RX_FE_SWAP_IQ, fe_swap_iq? 1 : 0); + + //set the dsp mux for each channel + for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ + bool iq_swap = false, real_mode = false; + switch(_dboard_manager->get_rx_subdev(_rx_subdev_spec.at(i).sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>()){ + case SUBDEV_CONN_COMPLEX_IQ: + iq_swap = fe_swap_iq; + real_mode = false; + break; + case SUBDEV_CONN_COMPLEX_QI: + iq_swap = not fe_swap_iq; + real_mode = false; + break; + case SUBDEV_CONN_REAL_I: + iq_swap = fe_swap_iq; + real_mode = true; + break; + case SUBDEV_CONN_REAL_Q: + iq_swap = not fe_swap_iq; + real_mode = true; + break; + } + _iface->poke32(B100_REG_DSP_RX_MUX(i), + (iq_swap? B100_FLAG_DSP_RX_MUX_SWAP_IQ : 0) | + (real_mode? B100_FLAG_DSP_RX_MUX_REAL_MODE : 0) + ); + } + this->update_xport_channel_mapping(); + }return; case MBOARD_PROP_TX_SUBDEV_SPEC: _tx_subdev_spec = val.as<subdev_spec_t>(); verify_tx_subdev_spec(_tx_subdev_spec, _mboard_proxy->get_link()); - UHD_ASSERT_THROW(_tx_subdev_spec.size() == 1); - //set the mux and set the number of tx channels - _iface->poke32(B100_REG_DSP_TX_MUX, dsp_type1::calc_tx_mux_word( + //sanity check + UHD_ASSERT_THROW(_tx_subdev_spec.size() <= B100_NUM_TX_DSPS); + //set the mux + _iface->poke32(B100_REG_TX_FE_MUX, dsp_type1::calc_tx_mux_word( _dboard_manager->get_tx_subdev(_tx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() )); return; @@ -238,7 +274,7 @@ void b100_impl::mboard_set(const wax::obj &key, const wax::obj &val) << "See the application notes for USRP-B100 for further instructions.\n" ; _clock_ctrl->set_fpga_clock_rate(val.as<double>()); - update_transport_channel_mapping(); + update_xport_channel_mapping(); return; default: UHD_THROW_PROP_SET_ERROR(); diff --git a/host/lib/usrp/usrp_e100/CMakeLists.txt b/host/lib/usrp/e100/CMakeLists.txt index d0e20a3d8..15133ad5e 100644 --- a/host/lib/usrp/usrp_e100/CMakeLists.txt +++ b/host/lib/usrp/e100/CMakeLists.txt @@ -22,9 +22,9 @@ ######################################################################## # Conditionally configure the USRP-E100 support ######################################################################## -LIBUHD_REGISTER_COMPONENT("USRP-E100" ENABLE_USRP_E100 OFF "ENABLE_LIBUHD;LINUX" OFF) +LIBUHD_REGISTER_COMPONENT("USRP-E100" ENABLE_E100 OFF "ENABLE_LIBUHD;LINUX" OFF) -IF(ENABLE_USRP_E100) +IF(ENABLE_E100) INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/include) LIBUHD_APPEND_SOURCES( @@ -39,11 +39,11 @@ IF(ENABLE_USRP_E100) ${CMAKE_CURRENT_SOURCE_DIR}/fpga_downloader.cpp ${CMAKE_CURRENT_SOURCE_DIR}/io_impl.cpp ${CMAKE_CURRENT_SOURCE_DIR}/mboard_impl.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_impl.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_impl.hpp - ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_iface.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_iface.hpp - ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_mmap_zero_copy.cpp - ${CMAKE_CURRENT_SOURCE_DIR}/usrp_e100_regs.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/e100_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/e100_impl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/e100_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/e100_iface.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/e100_mmap_zero_copy.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/e100_regs.hpp ) -ENDIF(ENABLE_USRP_E100) +ENDIF(ENABLE_E100) diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.cpp b/host/lib/usrp/e100/clock_ctrl.cpp index f1b29840a..ff64d9ca7 100644 --- a/host/lib/usrp/usrp_e100/clock_ctrl.cpp +++ b/host/lib/usrp/e100/clock_ctrl.cpp @@ -21,7 +21,7 @@ #include <uhd/utils/log.hpp> #include <uhd/utils/assert_has.hpp> #include <boost/cstdint.hpp> -#include "usrp_e100_regs.hpp" //spi slave constants +#include "e100_regs.hpp" //spi slave constants #include <boost/assign/list_of.hpp> #include <boost/foreach.hpp> #include <boost/format.hpp> @@ -165,13 +165,19 @@ static clock_settings_type get_clock_settings(double rate){ /*********************************************************************** * Clock Control Implementation **********************************************************************/ -class usrp_e100_clock_ctrl_impl : public usrp_e100_clock_ctrl{ +class e100_clock_ctrl_impl : public e100_clock_ctrl{ public: - usrp_e100_clock_ctrl_impl(usrp_e100_iface::sptr iface, double master_clock_rate){ + e100_clock_ctrl_impl(e100_iface::sptr iface, double master_clock_rate){ _iface = iface; _chan_rate = 0.0; _out_rate = 0.0; + //perform soft-reset + _ad9522_regs.soft_reset = 1; + this->send_reg(0x000); + this->latch_regs(); + _ad9522_regs.soft_reset = 0; + //init the clock gen registers //Note: out0 should already be clocking the FPGA or this isnt going to work _ad9522_regs.sdo_active = ad9522_regs_t::SDO_ACTIVE_SDO_SDIO; @@ -192,7 +198,7 @@ public: this->enable_tx_dboard_clock(false); } - ~usrp_e100_clock_ctrl_impl(void){ + ~e100_clock_ctrl_impl(void){ this->enable_test_clock(ENABLE_THE_TEST_OUT); this->enable_rx_dboard_clock(false); this->enable_tx_dboard_clock(false); @@ -291,7 +297,7 @@ public: //clock rate changed! update dboard clocks and FPGA ticks per second set_rx_dboard_clock_rate(rate); set_tx_dboard_clock_rate(rate); - _iface->poke32(UE_REG_TIME64_TPS, boost::uint32_t(get_fpga_clock_rate())); + _iface->poke32(E100_REG_TIME64_TPS, boost::uint32_t(get_fpga_clock_rate())); } double get_fpga_clock_rate(void){ @@ -415,7 +421,7 @@ public: } private: - usrp_e100_iface::sptr _iface; + e100_iface::sptr _iface; ad9522_regs_t _ad9522_regs; double _out_rate; //rate at the fpga and codec double _chan_rate; //rate before final dividers @@ -437,8 +443,6 @@ private: } void calibrate_now(void){ - set_ignore_sync_fpga_plus_codec(false); //want vco cal to sync - //vco calibration routine: _ad9522_regs.vco_calibration_now = 0; this->send_reg(0x18); @@ -467,20 +471,9 @@ private: _ad9522_regs.get_read_reg(addr), 24 ); _ad9522_regs.set_reg(addr, reg); - if (_ad9522_regs.digital_lock_detect) goto finalize; + if (_ad9522_regs.digital_lock_detect) return; } UHD_MSG(error) << "USRP-E100 clock control: lock detection timeout" << std::endl; - finalize: - - set_ignore_sync_fpga_plus_codec(true); //never loose sync between these two - } - - void set_ignore_sync_fpga_plus_codec(bool enb){ - _ad9522_regs.divider0_ignore_sync = (enb)?1:0; // master FPGA clock ignores sync (always on, cannot be disabled by sync pulse) - _ad9522_regs.divider1_ignore_sync = (enb)?1:0; // codec clock ignores sync (always on, cannot be disabled by sync pulse) - this->send_reg(0x191); - this->send_reg(0x194); - this->latch_regs(); } void soft_sync(void){ @@ -514,6 +507,6 @@ private: /*********************************************************************** * Clock Control Make **********************************************************************/ -usrp_e100_clock_ctrl::sptr usrp_e100_clock_ctrl::make(usrp_e100_iface::sptr iface, double master_clock_rate){ - return sptr(new usrp_e100_clock_ctrl_impl(iface, master_clock_rate)); +e100_clock_ctrl::sptr e100_clock_ctrl::make(e100_iface::sptr iface, double master_clock_rate){ + return sptr(new e100_clock_ctrl_impl(iface, master_clock_rate)); } diff --git a/host/lib/usrp/usrp_e100/clock_ctrl.hpp b/host/lib/usrp/e100/clock_ctrl.hpp index 6f16bc6ed..f3a6de0fa 100644 --- a/host/lib/usrp/usrp_e100/clock_ctrl.hpp +++ b/host/lib/usrp/e100/clock_ctrl.hpp @@ -18,7 +18,7 @@ #ifndef INCLUDED_USRP_E100_CLOCK_CTRL_HPP #define INCLUDED_USRP_E100_CLOCK_CTRL_HPP -#include "usrp_e100_iface.hpp" +#include "e100_iface.hpp" #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> #include <vector> @@ -28,9 +28,9 @@ * - Setup system clocks. * - Disable/enable clock lines. */ -class usrp_e100_clock_ctrl : boost::noncopyable{ +class e100_clock_ctrl : boost::noncopyable{ public: - typedef boost::shared_ptr<usrp_e100_clock_ctrl> sptr; + typedef boost::shared_ptr<e100_clock_ctrl> sptr; /*! * Make a new clock control object. @@ -38,7 +38,7 @@ public: * \param master clock rate the FPGA rate * \return the clock control object */ - static sptr make(usrp_e100_iface::sptr iface, double master_clock_rate); + static sptr make(e100_iface::sptr iface, double master_clock_rate); /*! * Set the rate of the fpga clock line. diff --git a/host/lib/usrp/usrp_e100/codec_ctrl.cpp b/host/lib/usrp/e100/codec_ctrl.cpp index 43ad94a88..a796d5cc5 100644 --- a/host/lib/usrp/usrp_e100/codec_ctrl.cpp +++ b/host/lib/usrp/e100/codec_ctrl.cpp @@ -24,22 +24,22 @@ #include <boost/cstdint.hpp> #include <boost/tuple/tuple.hpp> #include <boost/math/special_functions/round.hpp> -#include "usrp_e100_regs.hpp" //spi slave constants +#include "e100_regs.hpp" //spi slave constants #include <boost/assign/list_of.hpp> using namespace uhd; -const gain_range_t usrp_e100_codec_ctrl::tx_pga_gain_range(-20, 0, double(0.1)); -const gain_range_t usrp_e100_codec_ctrl::rx_pga_gain_range(0, 20, 1); +const gain_range_t e100_codec_ctrl::tx_pga_gain_range(-20, 0, double(0.1)); +const gain_range_t e100_codec_ctrl::rx_pga_gain_range(0, 20, 1); /*********************************************************************** * Codec Control Implementation **********************************************************************/ -class usrp_e100_codec_ctrl_impl : public usrp_e100_codec_ctrl{ +class e100_codec_ctrl_impl : public e100_codec_ctrl{ public: //structors - usrp_e100_codec_ctrl_impl(usrp_e100_iface::sptr iface); - ~usrp_e100_codec_ctrl_impl(void); + e100_codec_ctrl_impl(e100_iface::sptr iface); + ~e100_codec_ctrl_impl(void); //aux adc and dac control double read_aux_adc(aux_adc_t which); @@ -52,7 +52,7 @@ public: double get_rx_pga_gain(char); private: - usrp_e100_iface::sptr _iface; + e100_iface::sptr _iface; ad9862_regs_t _ad9862_regs; void send_reg(boost::uint8_t addr); void recv_reg(boost::uint8_t addr); @@ -61,7 +61,7 @@ private: /*********************************************************************** * Codec Control Structors **********************************************************************/ -usrp_e100_codec_ctrl_impl::usrp_e100_codec_ctrl_impl(usrp_e100_iface::sptr iface){ +e100_codec_ctrl_impl::e100_codec_ctrl_impl(e100_iface::sptr iface){ _iface = iface; //soft reset @@ -116,7 +116,7 @@ usrp_e100_codec_ctrl_impl::usrp_e100_codec_ctrl_impl(usrp_e100_iface::sptr iface this->send_reg(34); } -usrp_e100_codec_ctrl_impl::~usrp_e100_codec_ctrl_impl(void){ +e100_codec_ctrl_impl::~e100_codec_ctrl_impl(void){ //set aux dacs to zero this->write_aux_dac(AUX_DAC_A, 0); this->write_aux_dac(AUX_DAC_B, 0); @@ -136,19 +136,19 @@ usrp_e100_codec_ctrl_impl::~usrp_e100_codec_ctrl_impl(void){ **********************************************************************/ static const int mtpgw = 255; //maximum tx pga gain word -void usrp_e100_codec_ctrl_impl::set_tx_pga_gain(double gain){ +void e100_codec_ctrl_impl::set_tx_pga_gain(double gain){ int gain_word = int(mtpgw*(gain - tx_pga_gain_range.start())/(tx_pga_gain_range.stop() - tx_pga_gain_range.start())); _ad9862_regs.tx_pga_gain = uhd::clip(gain_word, 0, mtpgw); this->send_reg(16); } -double usrp_e100_codec_ctrl_impl::get_tx_pga_gain(void){ +double e100_codec_ctrl_impl::get_tx_pga_gain(void){ return (_ad9862_regs.tx_pga_gain*(tx_pga_gain_range.stop() - tx_pga_gain_range.start())/mtpgw) + tx_pga_gain_range.start(); } static const int mrpgw = 0x14; //maximum rx pga gain word -void usrp_e100_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ +void e100_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ int gain_word = int(mrpgw*(gain - rx_pga_gain_range.start())/(rx_pga_gain_range.stop() - rx_pga_gain_range.start())); gain_word = uhd::clip(gain_word, 0, mrpgw); switch(which){ @@ -164,7 +164,7 @@ void usrp_e100_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ } } -double usrp_e100_codec_ctrl_impl::get_rx_pga_gain(char which){ +double e100_codec_ctrl_impl::get_rx_pga_gain(char which){ int gain_word; switch(which){ case 'A': gain_word = _ad9862_regs.rx_pga_a; break; @@ -181,7 +181,7 @@ static double aux_adc_to_volts(boost::uint8_t high, boost::uint8_t low){ return double((boost::uint16_t(high) << 2) | low)*3.3/0x3ff; } -double usrp_e100_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ +double e100_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ switch(which){ case AUX_ADC_A1: _ad9862_regs.select_a = ad9862_regs_t::SELECT_A_AUX_ADC1; @@ -217,7 +217,7 @@ double usrp_e100_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ /*********************************************************************** * Codec Control AUX DAC Methods **********************************************************************/ -void usrp_e100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ +void e100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ //special case for aux dac d (aka sigma delta word) if (which == AUX_DAC_D){ boost::uint16_t dac_word = uhd::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); @@ -250,7 +250,7 @@ void usrp_e100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ /*********************************************************************** * Codec Control SPI Methods **********************************************************************/ -void usrp_e100_codec_ctrl_impl::send_reg(boost::uint8_t addr){ +void e100_codec_ctrl_impl::send_reg(boost::uint8_t addr){ boost::uint32_t reg = _ad9862_regs.get_write_reg(addr); UHD_LOGV(often) << "codec control write reg: " << std::hex << reg << std::endl; _iface->write_spi( @@ -260,7 +260,7 @@ void usrp_e100_codec_ctrl_impl::send_reg(boost::uint8_t addr){ ); } -void usrp_e100_codec_ctrl_impl::recv_reg(boost::uint8_t addr){ +void e100_codec_ctrl_impl::recv_reg(boost::uint8_t addr){ boost::uint32_t reg = _ad9862_regs.get_read_reg(addr); UHD_LOGV(often) << "codec control read reg: " << std::hex << reg << std::endl; boost::uint32_t ret = _iface->read_spi( @@ -275,6 +275,6 @@ void usrp_e100_codec_ctrl_impl::recv_reg(boost::uint8_t addr){ /*********************************************************************** * Codec Control Make **********************************************************************/ -usrp_e100_codec_ctrl::sptr usrp_e100_codec_ctrl::make(usrp_e100_iface::sptr iface){ - return sptr(new usrp_e100_codec_ctrl_impl(iface)); +e100_codec_ctrl::sptr e100_codec_ctrl::make(e100_iface::sptr iface){ + return sptr(new e100_codec_ctrl_impl(iface)); } diff --git a/host/lib/usrp/usrp_e100/codec_ctrl.hpp b/host/lib/usrp/e100/codec_ctrl.hpp index 05d7aab38..22d0390f5 100644 --- a/host/lib/usrp/usrp_e100/codec_ctrl.hpp +++ b/host/lib/usrp/e100/codec_ctrl.hpp @@ -18,7 +18,7 @@ #ifndef INCLUDED_USRP_E100_CODEC_CTRL_HPP #define INCLUDED_USRP_E100_CODEC_CTRL_HPP -#include "usrp_e100_iface.hpp" +#include "e100_iface.hpp" #include <uhd/types/ranges.hpp> #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> @@ -28,9 +28,9 @@ * - Init/power down codec. * - Read aux adc, write aux dac. */ -class usrp_e100_codec_ctrl : boost::noncopyable{ +class e100_codec_ctrl : boost::noncopyable{ public: - typedef boost::shared_ptr<usrp_e100_codec_ctrl> sptr; + typedef boost::shared_ptr<e100_codec_ctrl> sptr; static const uhd::gain_range_t tx_pga_gain_range; static const uhd::gain_range_t rx_pga_gain_range; @@ -40,7 +40,7 @@ public: * \param iface the usrp_e100 iface object * \return the codec control object */ - static sptr make(usrp_e100_iface::sptr iface); + static sptr make(e100_iface::sptr iface); //! aux adc identifier constants enum aux_adc_t{ diff --git a/host/lib/usrp/usrp_e100/codec_impl.cpp b/host/lib/usrp/e100/codec_impl.cpp index ae198aaa5..26743d173 100644 --- a/host/lib/usrp/usrp_e100/codec_impl.cpp +++ b/host/lib/usrp/e100/codec_impl.cpp @@ -15,7 +15,7 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_impl.hpp" +#include "e100_impl.hpp" #include <uhd/exception.hpp> #include <uhd/usrp/codec_props.hpp> #include <boost/bind.hpp> @@ -26,15 +26,15 @@ using namespace uhd::usrp; /*********************************************************************** * Helper Methods **********************************************************************/ -void usrp_e100_impl::codec_init(void){ +void e100_impl::codec_init(void){ //make proxies _rx_codec_proxy = wax_obj_proxy::make( - boost::bind(&usrp_e100_impl::rx_codec_get, this, _1, _2), - boost::bind(&usrp_e100_impl::rx_codec_set, this, _1, _2) + boost::bind(&e100_impl::rx_codec_get, this, _1, _2), + boost::bind(&e100_impl::rx_codec_set, this, _1, _2) ); _tx_codec_proxy = wax_obj_proxy::make( - boost::bind(&usrp_e100_impl::tx_codec_get, this, _1, _2), - boost::bind(&usrp_e100_impl::tx_codec_set, this, _1, _2) + boost::bind(&e100_impl::tx_codec_get, this, _1, _2), + boost::bind(&e100_impl::tx_codec_set, this, _1, _2) ); } @@ -43,7 +43,7 @@ void usrp_e100_impl::codec_init(void){ **********************************************************************/ static const std::string ad9862_pga_gain_name = "ad9862 pga"; -void usrp_e100_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ +void e100_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); //handle the get request conditioned on the key @@ -62,7 +62,7 @@ void usrp_e100_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ case CODEC_PROP_GAIN_RANGE: UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); - val = usrp_e100_codec_ctrl::rx_pga_gain_range; + val = e100_codec_ctrl::rx_pga_gain_range; return; case CODEC_PROP_GAIN_I: @@ -79,7 +79,7 @@ void usrp_e100_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ } } -void usrp_e100_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val){ +void e100_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); //handle the set request conditioned on the key @@ -101,7 +101,7 @@ void usrp_e100_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val){ /*********************************************************************** * TX Codec Properties **********************************************************************/ -void usrp_e100_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ +void e100_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); //handle the get request conditioned on the key @@ -120,7 +120,7 @@ void usrp_e100_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ case CODEC_PROP_GAIN_RANGE: UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); - val = usrp_e100_codec_ctrl::tx_pga_gain_range; + val = e100_codec_ctrl::tx_pga_gain_range; return; case CODEC_PROP_GAIN_I: //only one gain for I and Q @@ -133,7 +133,7 @@ void usrp_e100_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ } } -void usrp_e100_impl::tx_codec_set(const wax::obj &key_, const wax::obj &val){ +void e100_impl::tx_codec_set(const wax::obj &key_, const wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); //handle the set request conditioned on the key diff --git a/host/lib/usrp/usrp_e100/dboard_iface.cpp b/host/lib/usrp/e100/dboard_iface.cpp index 61b5a1c92..43e05aa57 100644 --- a/host/lib/usrp/usrp_e100/dboard_iface.cpp +++ b/host/lib/usrp/e100/dboard_iface.cpp @@ -15,8 +15,8 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_iface.hpp" -#include "usrp_e100_regs.hpp" +#include "e100_iface.hpp" +#include "e100_regs.hpp" #include "clock_ctrl.hpp" #include "codec_ctrl.hpp" #include <uhd/usrp/dboard_iface.hpp> @@ -33,9 +33,9 @@ class usrp_e100_dboard_iface : public dboard_iface{ public: usrp_e100_dboard_iface( - usrp_e100_iface::sptr iface, - usrp_e100_clock_ctrl::sptr clock, - usrp_e100_codec_ctrl::sptr codec + e100_iface::sptr iface, + e100_clock_ctrl::sptr clock, + e100_codec_ctrl::sptr codec ){ _iface = iface; _clock = clock; @@ -45,8 +45,8 @@ public: this->set_clock_rate(UNIT_RX, _clock->get_fpga_clock_rate()); this->set_clock_rate(UNIT_TX, _clock->get_fpga_clock_rate()); - _iface->poke16(UE_REG_GPIO_RX_DBG, 0); - _iface->poke16(UE_REG_GPIO_TX_DBG, 0); + _iface->poke16(E100_REG_GPIO_RX_DBG, 0); + _iface->poke16(E100_REG_GPIO_TX_DBG, 0); } ~usrp_e100_dboard_iface(void){ @@ -94,18 +94,18 @@ public: double get_codec_rate(unit_t); private: - usrp_e100_iface::sptr _iface; - usrp_e100_clock_ctrl::sptr _clock; - usrp_e100_codec_ctrl::sptr _codec; + e100_iface::sptr _iface; + e100_clock_ctrl::sptr _clock; + e100_codec_ctrl::sptr _codec; }; /*********************************************************************** * Make Function **********************************************************************/ dboard_iface::sptr make_usrp_e100_dboard_iface( - usrp_e100_iface::sptr iface, - usrp_e100_clock_ctrl::sptr clock, - usrp_e100_codec_ctrl::sptr codec + e100_iface::sptr iface, + e100_clock_ctrl::sptr clock, + e100_codec_ctrl::sptr codec ){ return dboard_iface::sptr(new usrp_e100_dboard_iface(iface, clock, codec)); } @@ -153,29 +153,29 @@ double usrp_e100_dboard_iface::get_codec_rate(unit_t){ void usrp_e100_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value){ UHD_ASSERT_THROW(GPIO_SEL_ATR == 1); //make this assumption switch(unit){ - case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_SEL, value); return; - case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_SEL, value); return; + case UNIT_RX: _iface->poke16(E100_REG_GPIO_RX_SEL, value); return; + case UNIT_TX: _iface->poke16(E100_REG_GPIO_TX_SEL, value); return; } } void usrp_e100_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value){ switch(unit){ - case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_DDR, value); return; - case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_DDR, value); return; + case UNIT_RX: _iface->poke16(E100_REG_GPIO_RX_DDR, value); return; + case UNIT_TX: _iface->poke16(E100_REG_GPIO_TX_DDR, value); return; } } void usrp_e100_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value){ switch(unit){ - case UNIT_RX: _iface->poke16(UE_REG_GPIO_RX_IO, value); return; - case UNIT_TX: _iface->poke16(UE_REG_GPIO_TX_IO, value); return; + case UNIT_RX: _iface->poke16(E100_REG_GPIO_RX_IO, value); return; + case UNIT_TX: _iface->poke16(E100_REG_GPIO_TX_IO, value); return; } } boost::uint16_t usrp_e100_dboard_iface::read_gpio(unit_t unit){ switch(unit){ - case UNIT_RX: return _iface->peek16(UE_REG_GPIO_RX_IO); - case UNIT_TX: return _iface->peek16(UE_REG_GPIO_TX_IO); + case UNIT_RX: return _iface->peek16(E100_REG_GPIO_RX_IO); + case UNIT_TX: return _iface->peek16(E100_REG_GPIO_TX_IO); default: UHD_THROW_INVALID_CODE_PATH(); } } @@ -186,16 +186,16 @@ void usrp_e100_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uin unit_t, uhd::dict<atr_reg_t, boost::uint32_t> > unit_to_atr_to_addr = map_list_of (UNIT_RX, map_list_of - (ATR_REG_IDLE, UE_REG_ATR_IDLE_RXSIDE) - (ATR_REG_TX_ONLY, UE_REG_ATR_INTX_RXSIDE) - (ATR_REG_RX_ONLY, UE_REG_ATR_INRX_RXSIDE) - (ATR_REG_FULL_DUPLEX, UE_REG_ATR_FULL_RXSIDE) + (ATR_REG_IDLE, E100_REG_ATR_IDLE_RXSIDE) + (ATR_REG_TX_ONLY, E100_REG_ATR_INTX_RXSIDE) + (ATR_REG_RX_ONLY, E100_REG_ATR_INRX_RXSIDE) + (ATR_REG_FULL_DUPLEX, E100_REG_ATR_FULL_RXSIDE) ) (UNIT_TX, map_list_of - (ATR_REG_IDLE, UE_REG_ATR_IDLE_TXSIDE) - (ATR_REG_TX_ONLY, UE_REG_ATR_INTX_TXSIDE) - (ATR_REG_RX_ONLY, UE_REG_ATR_INRX_TXSIDE) - (ATR_REG_FULL_DUPLEX, UE_REG_ATR_FULL_TXSIDE) + (ATR_REG_IDLE, E100_REG_ATR_IDLE_TXSIDE) + (ATR_REG_TX_ONLY, E100_REG_ATR_INTX_TXSIDE) + (ATR_REG_RX_ONLY, E100_REG_ATR_INRX_TXSIDE) + (ATR_REG_FULL_DUPLEX, E100_REG_ATR_FULL_TXSIDE) ) ; _iface->poke16(unit_to_atr_to_addr[unit][atr], value); @@ -213,13 +213,13 @@ void usrp_e100_dboard_iface::set_gpio_debug(unit_t unit, int which){ //set the debug on and which debug selection switch(unit){ case UNIT_RX: - _iface->poke16(UE_REG_GPIO_RX_DBG, 0xffff); - _iface->poke16(UE_REG_GPIO_RX_SEL, dbg_sels); + _iface->poke16(E100_REG_GPIO_RX_DBG, 0xffff); + _iface->poke16(E100_REG_GPIO_RX_SEL, dbg_sels); return; case UNIT_TX: - _iface->poke16(UE_REG_GPIO_TX_DBG, 0xffff); - _iface->poke16(UE_REG_GPIO_TX_SEL, dbg_sels); + _iface->poke16(E100_REG_GPIO_TX_DBG, 0xffff); + _iface->poke16(E100_REG_GPIO_TX_SEL, dbg_sels); return; } } @@ -274,26 +274,26 @@ byte_vector_t usrp_e100_dboard_iface::read_i2c(boost::uint8_t addr, size_t num_b **********************************************************************/ void usrp_e100_dboard_iface::write_aux_dac(dboard_iface::unit_t, aux_dac_t which, double value){ //same aux dacs for each unit - static const uhd::dict<aux_dac_t, usrp_e100_codec_ctrl::aux_dac_t> which_to_aux_dac = map_list_of - (AUX_DAC_A, usrp_e100_codec_ctrl::AUX_DAC_A) - (AUX_DAC_B, usrp_e100_codec_ctrl::AUX_DAC_B) - (AUX_DAC_C, usrp_e100_codec_ctrl::AUX_DAC_C) - (AUX_DAC_D, usrp_e100_codec_ctrl::AUX_DAC_D) + static const uhd::dict<aux_dac_t, e100_codec_ctrl::aux_dac_t> which_to_aux_dac = map_list_of + (AUX_DAC_A, e100_codec_ctrl::AUX_DAC_A) + (AUX_DAC_B, e100_codec_ctrl::AUX_DAC_B) + (AUX_DAC_C, e100_codec_ctrl::AUX_DAC_C) + (AUX_DAC_D, e100_codec_ctrl::AUX_DAC_D) ; _codec->write_aux_dac(which_to_aux_dac[which], value); } double usrp_e100_dboard_iface::read_aux_adc(dboard_iface::unit_t unit, aux_adc_t which){ static const uhd::dict< - unit_t, uhd::dict<aux_adc_t, usrp_e100_codec_ctrl::aux_adc_t> + unit_t, uhd::dict<aux_adc_t, e100_codec_ctrl::aux_adc_t> > unit_to_which_to_aux_adc = map_list_of (UNIT_RX, map_list_of - (AUX_ADC_A, usrp_e100_codec_ctrl::AUX_ADC_A1) - (AUX_ADC_B, usrp_e100_codec_ctrl::AUX_ADC_B1) + (AUX_ADC_A, e100_codec_ctrl::AUX_ADC_A1) + (AUX_ADC_B, e100_codec_ctrl::AUX_ADC_B1) ) (UNIT_TX, map_list_of - (AUX_ADC_A, usrp_e100_codec_ctrl::AUX_ADC_A2) - (AUX_ADC_B, usrp_e100_codec_ctrl::AUX_ADC_B2) + (AUX_ADC_A, e100_codec_ctrl::AUX_ADC_A2) + (AUX_ADC_B, e100_codec_ctrl::AUX_ADC_B2) ) ; return _codec->read_aux_adc(unit_to_which_to_aux_adc[unit][which]); diff --git a/host/lib/usrp/usrp_e100/dboard_impl.cpp b/host/lib/usrp/e100/dboard_impl.cpp index f6bbbd5e8..86481e70a 100644 --- a/host/lib/usrp/usrp_e100/dboard_impl.cpp +++ b/host/lib/usrp/e100/dboard_impl.cpp @@ -15,8 +15,8 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_impl.hpp" -#include "usrp_e100_regs.hpp" +#include "e100_impl.hpp" +#include "e100_regs.hpp" #include <uhd/exception.hpp> #include <uhd/usrp/dboard_props.hpp> #include <uhd/usrp/subdev_props.hpp> @@ -30,7 +30,7 @@ using namespace uhd::usrp; /*********************************************************************** * Dboard Initialization **********************************************************************/ -void usrp_e100_impl::dboard_init(void){ +void e100_impl::dboard_init(void){ //read the dboard eeprom to extract the dboard ids _rx_db_eeprom.load(*_iface, I2C_ADDR_RX_DB); _tx_db_eeprom.load(*_iface, I2C_ADDR_TX_DB); @@ -48,19 +48,19 @@ void usrp_e100_impl::dboard_init(void){ //setup the dboard proxies _rx_dboard_proxy = wax_obj_proxy::make( - boost::bind(&usrp_e100_impl::rx_dboard_get, this, _1, _2), - boost::bind(&usrp_e100_impl::rx_dboard_set, this, _1, _2) + boost::bind(&e100_impl::rx_dboard_get, this, _1, _2), + boost::bind(&e100_impl::rx_dboard_set, this, _1, _2) ); _tx_dboard_proxy = wax_obj_proxy::make( - boost::bind(&usrp_e100_impl::tx_dboard_get, this, _1, _2), - boost::bind(&usrp_e100_impl::tx_dboard_set, this, _1, _2) + boost::bind(&e100_impl::tx_dboard_get, this, _1, _2), + boost::bind(&e100_impl::tx_dboard_set, this, _1, _2) ); } /*********************************************************************** * RX Dboard Get **********************************************************************/ -void usrp_e100_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ +void e100_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); //handle the get request conditioned on the key @@ -105,7 +105,7 @@ void usrp_e100_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * RX Dboard Set **********************************************************************/ -void usrp_e100_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ +void e100_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ switch(key.as<dboard_prop_t>()){ case DBOARD_PROP_DBOARD_EEPROM: _rx_db_eeprom = val.as<dboard_eeprom_t>(); @@ -119,7 +119,7 @@ void usrp_e100_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ /*********************************************************************** * TX Dboard Get **********************************************************************/ -void usrp_e100_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ +void e100_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); //handle the get request conditioned on the key @@ -168,7 +168,7 @@ void usrp_e100_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * TX Dboard Set **********************************************************************/ -void usrp_e100_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){ +void e100_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){ switch(key.as<dboard_prop_t>()){ case DBOARD_PROP_DBOARD_EEPROM: _tx_db_eeprom = val.as<dboard_eeprom_t>(); diff --git a/host/lib/usrp/e100/dsp_impl.cpp b/host/lib/usrp/e100/dsp_impl.cpp new file mode 100644 index 000000000..fc65609a0 --- /dev/null +++ b/host/lib/usrp/e100/dsp_impl.cpp @@ -0,0 +1,217 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "e100_impl.hpp" +#include "e100_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/bind.hpp> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * DSP impl and methods + **********************************************************************/ +struct e100_impl::dsp_impl{ + uhd::dict<size_t, size_t> ddc_decim; + uhd::dict<size_t, double> ddc_freq; + uhd::dict<size_t, size_t> duc_interp; + uhd::dict<size_t, double> duc_freq; +}; + +/*********************************************************************** + * RX DDC Initialization + **********************************************************************/ +void e100_impl::dsp_init(void){ + //create new dsp impl + _dsp_impl = UHD_PIMPL_MAKE(dsp_impl, ()); + + //bind and initialize the rx dsps + for (size_t i = 0; i < E100_NUM_RX_DSPS; i++){ + _rx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&e100_impl::ddc_get, this, _1, _2, i), + boost::bind(&e100_impl::ddc_set, this, _1, _2, i) + ); + + //initial config and update + ddc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + ddc_set(DSP_PROP_HOST_RATE, double(_clock_ctrl->get_fpga_clock_rate()/16), i); + + //setup the rx control registers + _iface->poke32(E100_REG_RX_CTRL_CLEAR(i), 1); //reset + _iface->poke32(E100_REG_RX_CTRL_NSAMPS_PP(i), this->get_max_recv_samps_per_packet()); + _iface->poke32(E100_REG_RX_CTRL_NCHANNELS(i), 1); + _iface->poke32(E100_REG_RX_CTRL_VRT_HDR(i), 0 + | (0x1 << 28) //if data with stream id + | (0x1 << 26) //has trailer + | (0x3 << 22) //integer time other + | (0x1 << 20) //fractional time sample count + ); + _iface->poke32(E100_REG_RX_CTRL_VRT_SID(i), E100_DSP_SID_BASE + i); + _iface->poke32(E100_REG_RX_CTRL_VRT_TLR(i), 0); + _iface->poke32(E100_REG_TIME64_TPS, size_t(_clock_ctrl->get_fpga_clock_rate())); + } + + //bind and initialize the tx dsps + for (size_t i = 0; i < E100_NUM_TX_DSPS; i++){ + _tx_dsp_proxies[str(boost::format("DSP%d")%i)] = wax_obj_proxy::make( + boost::bind(&e100_impl::duc_get, this, _1, _2, i), + boost::bind(&e100_impl::duc_set, this, _1, _2, i) + ); + + //initial config and update + duc_set(DSP_PROP_FREQ_SHIFT, double(0), i); + duc_set(DSP_PROP_HOST_RATE, double(_clock_ctrl->get_fpga_clock_rate()/16), i); + + //init the tx control registers + _iface->poke32(E100_REG_TX_CTRL_CLEAR_STATE, 1); //reset + _iface->poke32(E100_REG_TX_CTRL_NUM_CHAN, 0); //1 channel + _iface->poke32(E100_REG_TX_CTRL_REPORT_SID, E100_ASYNC_SID); + _iface->poke32(E100_REG_TX_CTRL_POLICY, E100_FLAG_TX_CTRL_POLICY_NEXT_PACKET); + } +} + +/*********************************************************************** + * RX DDC Get + **********************************************************************/ +void e100_impl::ddc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = str(boost::format("%s ddc%d") % _iface->get_cname() % which_dsp); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _dsp_impl->ddc_freq[which_dsp]; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_fpga_clock_rate()/_dsp_impl->ddc_decim[which_dsp]; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX DDC Set + **********************************************************************/ +void e100_impl::ddc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_STREAM_CMD: + issue_ddc_stream_cmd(val.as<stream_cmd_t>(), which_dsp); + return; + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(E100_REG_DSP_RX_FREQ(which_dsp), + dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) + ); + _dsp_impl->ddc_freq[which_dsp] = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + _dsp_impl->ddc_decim[which_dsp] = boost::math::iround(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); + + //set the decimation + _iface->poke32(E100_REG_DSP_RX_DECIM(which_dsp), dsp_type1::calc_cic_filter_word(_dsp_impl->ddc_decim[which_dsp])); + } + this->update_xport_channel_mapping(); //rate changed -> update + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Get + **********************************************************************/ +void e100_impl::duc_get(const wax::obj &key_, wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = str(boost::format("%s duc%d") % _iface->get_cname() % which_dsp); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _dsp_impl->duc_freq[which_dsp]; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_fpga_clock_rate()/_dsp_impl->duc_interp[which_dsp]; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Set + **********************************************************************/ +void e100_impl::duc_set(const wax::obj &key_, const wax::obj &val, size_t which_dsp){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(E100_REG_DSP_TX_FREQ, + dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) + ); + _dsp_impl->duc_freq[which_dsp] = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + _dsp_impl->duc_interp[which_dsp] = boost::math::iround(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); + + //set the interpolation + _iface->poke32(E100_REG_DSP_TX_INTERP_RATE, dsp_type1::calc_cic_filter_word(_dsp_impl->duc_interp[which_dsp])); + + //set the scaling + _iface->poke32(E100_REG_DSP_TX_SCALE_IQ, dsp_type1::calc_iq_scale_word(_dsp_impl->duc_interp[which_dsp])); + } + this->update_xport_channel_mapping(); //rate changed -> update + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp b/host/lib/usrp/e100/e100_iface.cpp index 55446da63..d61ef42ad 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_iface.cpp +++ b/host/lib/usrp/e100/e100_iface.cpp @@ -15,17 +15,20 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_iface.hpp" -#include "usrp_e100_regs.hpp" +#include "e100_iface.hpp" +#include "e100_regs.hpp" #include <uhd/exception.hpp> +#include <uhd/utils/msg.hpp> #include <sys/ioctl.h> //ioctl #include <fcntl.h> //open, close #include <linux/usrp_e.h> //ioctl structures and constants +#include <boost/thread/thread.hpp> //sleep #include <boost/format.hpp> #include <boost/thread/mutex.hpp> #include <linux/i2c-dev.h> #include <linux/i2c.h> -#include <stdexcept> +#include <iostream> +#include <fstream> using namespace uhd; using namespace uhd::usrp; @@ -91,19 +94,16 @@ private: int _node_fd; /*********************************************************************** * USRP-E100 interface implementation **********************************************************************/ -class usrp_e100_iface_impl : public usrp_e100_iface{ +class e100_iface_impl : public e100_iface{ public: int get_file_descriptor(void){ return _node_fd; } - /******************************************************************* - * Structors - ******************************************************************/ - usrp_e100_iface_impl(const std::string &node): - _i2c_dev_iface(i2c_dev_iface("/dev/i2c-3")) - { + void open(const std::string &node){ + UHD_MSG(status) << "Opening device node " << node << "..." << std::endl; + //open the device node and check file descriptor if ((_node_fd = ::open(node.c_str(), O_RDWR)) < 0){ throw uhd::io_error("Failed to open " + node); @@ -112,18 +112,30 @@ public: //check the module compatibility number int module_compat_num = ::ioctl(_node_fd, USRP_E_GET_COMPAT_NUMBER, NULL); if (module_compat_num != USRP_E_COMPAT_NUMBER){ - throw uhd::runtime_error(str(boost::format( - "Expected module compatibility number 0x%x, but got 0x%x:\n" - "The module build is not compatible with the host code build." - ) % USRP_E_COMPAT_NUMBER % module_compat_num)); + throw uhd::runtime_error(str(boost::format( + "Expected module compatibility number 0x%x, but got 0x%x:\n" + "The module build is not compatible with the host code build." + ) % USRP_E_COMPAT_NUMBER % module_compat_num)); + } + } + + void close(void){ + ::close(_node_fd); + _node_fd = -1; } + /******************************************************************* + * Structors + ******************************************************************/ + e100_iface_impl(void): + _node_fd(-1), + _i2c_dev_iface(i2c_dev_iface("/dev/i2c-3")) + { mb_eeprom = mboard_eeprom_t(get_i2c_dev_iface(), mboard_eeprom_t::MAP_E100); } - ~usrp_e100_iface_impl(void){ - //close the device node file descriptor - ::close(_node_fd); + ~e100_iface_impl(void){ + if (_node_fd >= 0) this->close(); } /******************************************************************* @@ -245,6 +257,10 @@ public: size_t num_bits, bool readback ){ + if (which_slave == UE_SPI_SS_AD9522) return bitbang_spi( + bits, num_bits, readback + ); + //load data struct usrp_e_spi data; data.readback = (readback)? UE_SPI_TXRX : UE_SPI_TXONLY; @@ -263,11 +279,101 @@ public: //unload the data return data.data; } - + + boost::uint32_t bitbang_spi( + boost::uint32_t bits, + size_t num_bits, + bool readback + ){ + boost::uint32_t rb_bits = 0; + + _spi_bitbanger.spi_sen_gpio_write(0); + + for (size_t i = 0; i < num_bits; i++){ + _spi_bitbanger.spi_sclk_gpio_write(0); + _spi_bitbanger.spi_mosi_gpio_write((bits >> (num_bits-i-1)) & 0x1); + boost::this_thread::sleep(boost::posix_time::microseconds(10)); + if (readback) rb_bits = (rb_bits << 1) | _spi_bitbanger.spi_miso_gpio_read(); + _spi_bitbanger.spi_sclk_gpio_write(1); + boost::this_thread::sleep(boost::posix_time::microseconds(10)); + } + + _spi_bitbanger.spi_sen_gpio_write(1); + boost::this_thread::sleep(boost::posix_time::microseconds(100)); + + return rb_bits; + } + + class bitbang_spi_guts{ + public: + bitbang_spi_guts(void){ + //setup gpio pin directions + this->set_gpio_direction(spi_sclk_gpio, "out"); + this->set_gpio_direction(spi_sen_gpio, "out"); + this->set_gpio_direction(spi_mosi_gpio, "out"); + this->set_gpio_direction(spi_miso_gpio, "in"); + + //open the gpio pin values + _spi_sclk_gpio_value.open(str(boost::format("/sys/class/gpio/gpio%d/value") % spi_sclk_gpio).c_str()); + _spi_sen_gpio_value.open(str(boost::format("/sys/class/gpio/gpio%d/value") % spi_sen_gpio).c_str()); + _spi_mosi_gpio_value.open(str(boost::format("/sys/class/gpio/gpio%d/value") % spi_mosi_gpio).c_str()); + _spi_miso_gpio_value.open(str(boost::format("/sys/class/gpio/gpio%d/value") % spi_miso_gpio).c_str()); + } + + ~bitbang_spi_guts(void){ + this->set_gpio_direction(spi_sclk_gpio, "in"); + this->set_gpio_direction(spi_sen_gpio, "in"); + this->set_gpio_direction(spi_mosi_gpio, "in"); + } + + void spi_sclk_gpio_write(int val){ + _spi_sclk_gpio_value << val << std::endl << std::flush; + } + + void spi_sen_gpio_write(int val){ + _spi_sen_gpio_value << val << std::endl << std::flush; + } + + void spi_mosi_gpio_write(int val){ + _spi_mosi_gpio_value << val << std::endl << std::flush; + } + + int spi_miso_gpio_read(void){ + std::string val; + std::getline(_spi_miso_gpio_value, val); + _spi_miso_gpio_value.seekg(0); + return int(val.at(0) - '0') & 0x1; + } + + private: + enum{ + spi_sclk_gpio = 65, + spi_sen_gpio = 186, + spi_mosi_gpio = 145, + spi_miso_gpio = 147, + }; + + void set_gpio_direction(int gpio_num, const std::string &dir){ + std::ofstream export_file("/sys/class/gpio/export"); + export_file << gpio_num << std::endl << std::flush; + export_file.close(); + + std::ofstream dir_file(str(boost::format("/sys/class/gpio/gpio%d/direction") % gpio_num).c_str()); + dir_file << dir << std::endl << std::flush; + dir_file.close(); + } + + std::ofstream _spi_sclk_gpio_value, _spi_sen_gpio_value, _spi_mosi_gpio_value; + std::ifstream _spi_miso_gpio_value; + }; + + /******************************************************************* + * UART + ******************************************************************/ void write_uart(boost::uint8_t, const std::string &) { throw uhd::not_implemented_error("Unhandled command write_uart()"); } - + std::string read_uart(boost::uint8_t) { throw uhd::not_implemented_error("Unhandled command read_uart()"); } @@ -276,11 +382,12 @@ private: int _node_fd; i2c_dev_iface _i2c_dev_iface; boost::mutex _ctrl_mutex; + bitbang_spi_guts _spi_bitbanger; }; /*********************************************************************** * Public Make Function **********************************************************************/ -usrp_e100_iface::sptr usrp_e100_iface::make(const std::string &node){ - return sptr(new usrp_e100_iface_impl(node)); +e100_iface::sptr e100_iface::make(void){ + return sptr(new e100_iface_impl()); } diff --git a/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp b/host/lib/usrp/e100/e100_iface.hpp index d9fe96db7..a0135a468 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_iface.hpp +++ b/host/lib/usrp/e100/e100_iface.hpp @@ -15,8 +15,8 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#ifndef INCLUDED_USRP_E100_IFACE_HPP -#define INCLUDED_USRP_E100_IFACE_HPP +#ifndef INCLUDED_E100_IFACE_HPP +#define INCLUDED_E100_IFACE_HPP #include <uhd/transport/udp_simple.hpp> #include <uhd/usrp/mboard_eeprom.hpp> @@ -40,16 +40,20 @@ * Provides a set of functions to implementation layer. * Including spi, peek, poke, control... */ -class usrp_e100_iface : boost::noncopyable, public uhd::usrp::mboard_iface{ +class e100_iface : boost::noncopyable, public uhd::usrp::mboard_iface{ public: - typedef boost::shared_ptr<usrp_e100_iface> sptr; + typedef boost::shared_ptr<e100_iface> sptr; /*! * Make a new usrp-e interface with the control transport. - * \param node the device node name * \return a new usrp-e interface object */ - static sptr make(const std::string &node); + static sptr make(void); + + //! TODO implement this for multiple hardwares revs in the future + std::string get_cname(void){ + return "USRP-E100"; + } /*! * Get the underlying file descriptor. @@ -58,6 +62,17 @@ public: virtual int get_file_descriptor(void) = 0; /*! + * Open a device node into this iface. + * \param node the device node name + */ + virtual void open(const std::string &node) = 0; + + /*! + * Close the open device node in this iface. + */ + virtual void close(void) = 0; + + /*! * Perform an ioctl call on the device node file descriptor. * This will throw when the internal ioctl call fails. * \param request the control word @@ -72,4 +87,4 @@ public: uhd::usrp::mboard_eeprom_t mb_eeprom; }; -#endif /* INCLUDED_USRP_E100_IFACE_HPP */ +#endif /* INCLUDED_E100_IFACE_HPP */ diff --git a/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp b/host/lib/usrp/e100/e100_impl.cpp index 5b039aafc..5485388f9 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_impl.cpp +++ b/host/lib/usrp/e100/e100_impl.cpp @@ -15,8 +15,8 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_impl.hpp" -#include "usrp_e100_regs.hpp" +#include "e100_impl.hpp" +#include "e100_regs.hpp" #include <uhd/utils/msg.hpp> #include <uhd/usrp/device_props.hpp> #include <uhd/usrp/mboard_props.hpp> @@ -35,26 +35,26 @@ namespace fs = boost::filesystem; /*********************************************************************** * Discovery **********************************************************************/ -static device_addrs_t usrp_e100_find(const device_addr_t &hint){ - device_addrs_t usrp_e100_addrs; +static device_addrs_t e100_find(const device_addr_t &hint){ + device_addrs_t e100_addrs; //return an empty list of addresses when type is set to non-usrp-e - if (hint.has_key("type") and hint["type"] != "e100") return usrp_e100_addrs; + if (hint.has_key("type") and hint["type"] != "e100") return e100_addrs; //device node not provided, assume its 0 if (not hint.has_key("node")){ device_addr_t new_addr = hint; new_addr["node"] = "/dev/usrp_e0"; - return usrp_e100_find(new_addr); + return e100_find(new_addr); } //use the given device node name if (fs::exists(hint["node"])){ device_addr_t new_addr; - new_addr["type"] = "usrp-e"; + new_addr["type"] = "e100"; new_addr["node"] = fs::system_complete(fs::path(hint["node"])).string(); try{ - usrp_e100_iface::sptr iface = usrp_e100_iface::make(new_addr["node"]); + e100_iface::sptr iface = e100_iface::make(); new_addr["name"] = iface->mb_eeprom["name"]; new_addr["serial"] = iface->mb_eeprom["serial"]; } @@ -66,11 +66,11 @@ static device_addrs_t usrp_e100_find(const device_addr_t &hint){ (not hint.has_key("name") or hint["name"] == new_addr["name"]) and (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]) ){ - usrp_e100_addrs.push_back(new_addr); + e100_addrs.push_back(new_addr); } } - return usrp_e100_addrs; + return e100_addrs; } /*********************************************************************** @@ -85,78 +85,89 @@ static size_t hash_fpga_file(const std::string &file_path){ return hash; } -static device::sptr usrp_e100_make(const device_addr_t &device_addr){ +static device::sptr e100_make(const device_addr_t &device_addr){ //setup the main interface into fpga - std::string node = device_addr["node"]; - UHD_MSG(status) << boost::format("Opening USRP-E on %s") % node << std::endl; - usrp_e100_iface::sptr iface = usrp_e100_iface::make(node); + const std::string node = device_addr["node"]; + e100_iface::sptr iface = e100_iface::make(); + iface->open(node); - //extract the fpga path for usrp-e - std::string usrp_e100_fpga_image = find_image_path(device_addr.get("fpga", "usrp_e100_fpga.bin")); + //setup clock control here to ensure that the FPGA has a good clock before we continue + const double master_clock_rate = device_addr.cast<double>("master_clock_rate", E100_DEFAULT_CLOCK_RATE); + e100_clock_ctrl::sptr clock_ctrl = e100_clock_ctrl::make(iface, master_clock_rate); - //compute a hash of the fpga file - const boost::uint32_t file_hash = boost::uint32_t(hash_fpga_file(usrp_e100_fpga_image)); + //extract the fpga path for usrp-e and compute hash + const std::string e100_fpga_image = find_image_path(device_addr.get("fpga", E100_FPGA_FILE_NAME)); + const boost::uint32_t file_hash = boost::uint32_t(hash_fpga_file(e100_fpga_image)); //When the hash does not match: - // - unload the iface to free the node - // - load the fpga configuration file - // - re-open the iface on the node - if (iface->peek32(UE_REG_RB_MISC_TEST32) != file_hash){ - iface.reset(); - usrp_e100_load_fpga(usrp_e100_fpga_image); - sleep(1); ///\todo do this better one day. - UHD_MSG(status) << boost::format("re-Opening USRP-E on %s") % node << std::endl; - iface = usrp_e100_iface::make(node); + // - close the device node + // - load the fpga bin file + // - re-open the device node + if (iface->peek32(E100_REG_RB_MISC_TEST32) != file_hash){ + iface->close(); + e100_load_fpga(e100_fpga_image); + iface->open(node); } - //store the hash into the FPGA register - iface->poke32(UE_REG_SR_MISC_TEST32, file_hash); - - //check that the hash can be readback correctly - if (iface->peek32(UE_REG_RB_MISC_TEST32) != file_hash){ - UHD_MSG(error) << boost::format( - "The FPGA hash readback failed!\n" - "The FPGA is either clocked improperly\n" - "or the FPGA build is not compatible.\n" - ); + //Perform wishbone readback tests, these tests also write the hash + bool test_fail = false; + UHD_MSG(status) << "Performing wishbone readback test... " << std::flush; + for (size_t i = 0; i < 100; i++){ + iface->poke32(E100_REG_SR_MISC_TEST32, file_hash); + test_fail = iface->peek32(E100_REG_RB_MISC_TEST32) != file_hash; + if (test_fail) break; //exit loop on any failure } + UHD_MSG(status) << ((test_fail)? " fail" : "pass") << std::endl; + + if (test_fail) UHD_MSG(error) << boost::format( + "The FPGA is either clocked improperly\n" + "or the FPGA build is not compatible.\n" + "Subsequent errors may follow...\n" + ); //check that the compatibility is correct - const boost::uint16_t fpga_compat_num = iface->peek16(UE_REG_MISC_COMPAT); - if (fpga_compat_num != USRP_E_FPGA_COMPAT_NUM){ + const boost::uint16_t fpga_compat_num = iface->peek16(E100_REG_MISC_COMPAT); + if (fpga_compat_num != E100_FPGA_COMPAT_NUM){ throw uhd::runtime_error(str(boost::format( "\nPlease update the FPGA image for your device.\n" "See the application notes for USRP E-Series for instructions.\n" "Expected FPGA compatibility number 0x%x, but got 0x%x:\n" "The FPGA build is not compatible with the host code build." - ) % USRP_E_FPGA_COMPAT_NUM % fpga_compat_num)); + ) % E100_FPGA_COMPAT_NUM % fpga_compat_num)); } - return device::sptr(new usrp_e100_impl(iface, device_addr)); + return device::sptr(new e100_impl(device_addr, iface, clock_ctrl)); } -UHD_STATIC_BLOCK(register_usrp_e100_device){ - device::register_device(&usrp_e100_find, &usrp_e100_make); +UHD_STATIC_BLOCK(register_e100_device){ + device::register_device(&e100_find, &e100_make); } /*********************************************************************** * Structors **********************************************************************/ -usrp_e100_impl::usrp_e100_impl( - usrp_e100_iface::sptr iface, - const device_addr_t &device_addr +e100_impl::e100_impl( + const uhd::device_addr_t &device_addr, + e100_iface::sptr iface, + e100_clock_ctrl::sptr clock_ctrl ): _iface(iface), - _data_xport(usrp_e100_make_mmap_zero_copy(_iface)), + _clock_ctrl(clock_ctrl), + _codec_ctrl(e100_codec_ctrl::make(_iface)), + _data_xport(e100_make_mmap_zero_copy(_iface)), _recv_frame_size(std::min(_data_xport->get_recv_frame_size(), size_t(device_addr.cast<double>("recv_frame_size", 1e9)))), _send_frame_size(std::min(_data_xport->get_send_frame_size(), size_t(device_addr.cast<double>("send_frame_size", 1e9)))) { - //setup interfaces into hardware - const double master_clock_rate = device_addr.cast<double>("master_clock_rate", 64e6); - _clock_ctrl = usrp_e100_clock_ctrl::make(_iface, master_clock_rate); - _codec_ctrl = usrp_e100_codec_ctrl::make(_iface); + //setup otw types + _send_otw_type.width = 16; + _send_otw_type.shift = 0; + _send_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + _recv_otw_type.width = 16; + _recv_otw_type.shift = 0; + _recv_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; //initialize the mboard mboard_init(); @@ -165,8 +176,7 @@ usrp_e100_impl::usrp_e100_impl( dboard_init(); //initialize the dsps - rx_ddc_init(); - tx_duc_init(); + dsp_init(); //init the codec properties codec_init(); @@ -180,14 +190,14 @@ usrp_e100_impl::usrp_e100_impl( } -usrp_e100_impl::~usrp_e100_impl(void){ +e100_impl::~e100_impl(void){ /* NOP */ } /*********************************************************************** * Device Get **********************************************************************/ -void usrp_e100_impl::get(const wax::obj &key_, wax::obj &val){ +void e100_impl::get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); //handle the get request conditioned on the key @@ -212,6 +222,6 @@ void usrp_e100_impl::get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * Device Set **********************************************************************/ -void usrp_e100_impl::set(const wax::obj &, const wax::obj &){ +void e100_impl::set(const wax::obj &, const wax::obj &){ UHD_THROW_PROP_SET_ERROR(); } diff --git a/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp b/host/lib/usrp/e100/e100_impl.hpp index 1c17863fb..1390559a0 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_impl.hpp +++ b/host/lib/usrp/e100/e100_impl.hpp @@ -15,7 +15,7 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_iface.hpp" +#include "e100_iface.hpp" #include "clock_ctrl.hpp" #include "codec_ctrl.hpp" #include <uhd/device.hpp> @@ -28,15 +28,21 @@ #include <uhd/usrp/dboard_manager.hpp> #include <uhd/transport/zero_copy.hpp> -#ifndef INCLUDED_USRP_E100_IMPL_HPP -#define INCLUDED_USRP_E100_IMPL_HPP +#ifndef INCLUDED_E100_IMPL_HPP +#define INCLUDED_E100_IMPL_HPP -uhd::transport::zero_copy_if::sptr usrp_e100_make_mmap_zero_copy(usrp_e100_iface::sptr iface); +uhd::transport::zero_copy_if::sptr e100_make_mmap_zero_copy(e100_iface::sptr iface); -static const boost::uint16_t USRP_E_FPGA_COMPAT_NUM = 0x04; +static const std::string E100_FPGA_FILE_NAME = "usrp_e100_fpga5.bin"; +static const boost::uint16_t E100_FPGA_COMPAT_NUM = 0x05; +static const double E100_DEFAULT_CLOCK_RATE = 64e6; +static const size_t E100_NUM_RX_DSPS = 2; +static const size_t E100_NUM_TX_DSPS = 1; +static const boost::uint32_t E100_DSP_SID_BASE = 2; //leave room for other dsp (increments by 1) +static const boost::uint32_t E100_ASYNC_SID = 1; //! load an fpga image from a bin file into the usrp-e fpga -extern void usrp_e100_load_fpga(const std::string &bin_file); +extern void e100_load_fpga(const std::string &bin_file); /*! * Make a usrp-e dboard interface. @@ -46,9 +52,9 @@ extern void usrp_e100_load_fpga(const std::string &bin_file); * \return a sptr to a new dboard interface */ uhd::usrp::dboard_iface::sptr make_usrp_e100_dboard_iface( - usrp_e100_iface::sptr iface, - usrp_e100_clock_ctrl::sptr clock, - usrp_e100_codec_ctrl::sptr codec + e100_iface::sptr iface, + e100_clock_ctrl::sptr clock, + e100_codec_ctrl::sptr codec ); /*! @@ -79,11 +85,15 @@ private: * The implementation details are encapsulated here. * Handles properties on the mboard, dboard, dsps... */ -class usrp_e100_impl : public uhd::device{ +class e100_impl : public uhd::device{ public: //structors - usrp_e100_impl(usrp_e100_iface::sptr, const uhd::device_addr_t &); - ~usrp_e100_impl(void); + e100_impl( + const uhd::device_addr_t &, + e100_iface::sptr, + e100_clock_ctrl::sptr + ); + ~e100_impl(void); //the io interface size_t send(const send_buffs_type &, size_t, const uhd::tx_metadata_t &, const uhd::io_type_t &, send_mode_t, double); @@ -94,7 +104,13 @@ public: private: //interface to ioctls and file descriptor - usrp_e100_iface::sptr _iface; + e100_iface::sptr _iface; + + //ad9522 clock control + e100_clock_ctrl::sptr _clock_ctrl; + + //ad9862 codec control + e100_codec_ctrl::sptr _codec_ctrl; //handle io stuff uhd::transport::zero_copy_if::sptr _data_xport; @@ -102,19 +118,12 @@ private: size_t _recv_frame_size, _send_frame_size; uhd::otw_type_t _send_otw_type, _recv_otw_type; void io_init(void); - void issue_stream_cmd(const uhd::stream_cmd_t &stream_cmd); void handle_overrun(size_t); void update_xport_channel_mapping(void); //configuration shadows uhd::clock_config_t _clock_config; - //ad9522 clock control - usrp_e100_clock_ctrl::sptr _clock_ctrl; - - //ad9862 codec control - usrp_e100_codec_ctrl::sptr _codec_ctrl; - //device functions and settings void get(const wax::obj &, wax::obj &); void set(const wax::obj &, const wax::obj &); @@ -143,19 +152,20 @@ private: void tx_dboard_set(const wax::obj &, const wax::obj &); wax_obj_proxy::sptr _tx_dboard_proxy; - //rx ddc functions and settings - void rx_ddc_init(void); - void rx_ddc_get(const wax::obj &, wax::obj &); - void rx_ddc_set(const wax::obj &, const wax::obj &); - double _ddc_freq; size_t _ddc_decim; - wax_obj_proxy::sptr _rx_ddc_proxy; + //methods and shadows for the dsps + UHD_PIMPL_DECL(dsp_impl) _dsp_impl; + void dsp_init(void); + void issue_ddc_stream_cmd(const uhd::stream_cmd_t &, size_t); + + //properties interface for ddc + void ddc_get(const wax::obj &, wax::obj &, size_t); + void ddc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _rx_dsp_proxies; - //tx duc functions and settings - void tx_duc_init(void); - void tx_duc_get(const wax::obj &, wax::obj &); - void tx_duc_set(const wax::obj &, const wax::obj &); - double _duc_freq; size_t _duc_interp; - wax_obj_proxy::sptr _tx_duc_proxy; + //properties interface for duc + void duc_get(const wax::obj &, wax::obj &, size_t); + void duc_set(const wax::obj &, const wax::obj &, size_t); + uhd::dict<std::string, wax_obj_proxy::sptr> _tx_dsp_proxies; //codec functions and settings void codec_init(void); @@ -170,4 +180,4 @@ private: void update_clock_config(void); }; -#endif /* INCLUDED_USRP_E100_IMPL_HPP */ +#endif /* INCLUDED_E100_IMPL_HPP */ diff --git a/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp b/host/lib/usrp/e100/e100_mmap_zero_copy.cpp index bb421507a..5370b7594 100644 --- a/host/lib/usrp/usrp_e100/usrp_e100_mmap_zero_copy.cpp +++ b/host/lib/usrp/e100/e100_mmap_zero_copy.cpp @@ -15,7 +15,7 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_iface.hpp" +#include "e100_iface.hpp" #include <uhd/transport/zero_copy.hpp> #include <uhd/utils/log.hpp> #include <uhd/exception.hpp> @@ -35,9 +35,9 @@ static const size_t poll_breakout = 10; //how many poll timeouts constitute a fu * Reusable managed receiver buffer: * - The buffer knows how to claim and release a frame. **********************************************************************/ -class usrp_e100_mmap_zero_copy_mrb : public managed_recv_buffer{ +class e100_mmap_zero_copy_mrb : public managed_recv_buffer{ public: - usrp_e100_mmap_zero_copy_mrb(void *mem, ring_buffer_info *info): + e100_mmap_zero_copy_mrb(void *mem, ring_buffer_info *info): _mem(mem), _info(info) { /* NOP */ } void release(void){ @@ -66,9 +66,9 @@ private: * Reusable managed send buffer: * - The buffer knows how to claim and release a frame. **********************************************************************/ -class usrp_e100_mmap_zero_copy_msb : public managed_send_buffer{ +class e100_mmap_zero_copy_msb : public managed_send_buffer{ public: - usrp_e100_mmap_zero_copy_msb(void *mem, ring_buffer_info *info, size_t len, int fd): + e100_mmap_zero_copy_msb(void *mem, ring_buffer_info *info, size_t len, int fd): _mem(mem), _info(info), _len(len), _fd(fd) { /* NOP */ } void commit(size_t len){ @@ -102,9 +102,9 @@ private: /*********************************************************************** * The zero copy interface implementation **********************************************************************/ -class usrp_e100_mmap_zero_copy_impl : public zero_copy_if{ +class e100_mmap_zero_copy_impl : public zero_copy_if{ public: - usrp_e100_mmap_zero_copy_impl(usrp_e100_iface::sptr iface): + e100_mmap_zero_copy_impl(e100_iface::sptr iface): _fd(iface->get_file_descriptor()), _recv_index(0), _send_index(0) { //get system sizes @@ -162,28 +162,28 @@ public: //initialize the managed receive buffers for (size_t i = 0; i < get_num_recv_frames(); i++){ - _mrb_pool.push_back(usrp_e100_mmap_zero_copy_mrb( + _mrb_pool.push_back(e100_mmap_zero_copy_mrb( recv_buff + get_recv_frame_size()*i, (*recv_info) + i )); } //initialize the managed send buffers for (size_t i = 0; i < get_num_recv_frames(); i++){ - _msb_pool.push_back(usrp_e100_mmap_zero_copy_msb( + _msb_pool.push_back(e100_mmap_zero_copy_msb( send_buff + get_send_frame_size()*i, (*send_info) + i, get_send_frame_size(), _fd )); } } - ~usrp_e100_mmap_zero_copy_impl(void){ + ~e100_mmap_zero_copy_impl(void){ UHD_LOG << "cleanup: munmap" << std::endl; ::munmap(_mapped_mem, _map_size); } managed_recv_buffer::sptr get_recv_buff(double timeout){ if (fp_verbose) UHD_LOGV(always) << "get_recv_buff: " << _recv_index << std::endl; - usrp_e100_mmap_zero_copy_mrb &mrb = _mrb_pool[_recv_index]; + e100_mmap_zero_copy_mrb &mrb = _mrb_pool[_recv_index]; //poll/wait for a ready frame if (not mrb.ready()){ @@ -215,7 +215,7 @@ public: managed_send_buffer::sptr get_send_buff(double timeout){ if (fp_verbose) UHD_LOGV(always) << "get_send_buff: " << _send_index << std::endl; - usrp_e100_mmap_zero_copy_msb &msb = _msb_pool[_send_index]; + e100_mmap_zero_copy_msb &msb = _msb_pool[_send_index]; //poll/wait for a ready frame if (not msb.ready()){ @@ -254,8 +254,8 @@ private: size_t _frame_size, _map_size; //re-usable managed buffers - std::vector<usrp_e100_mmap_zero_copy_mrb> _mrb_pool; - std::vector<usrp_e100_mmap_zero_copy_msb> _msb_pool; + std::vector<e100_mmap_zero_copy_mrb> _mrb_pool; + std::vector<e100_mmap_zero_copy_msb> _msb_pool; //indexes into sub-sections of mapped memory size_t _recv_index, _send_index; @@ -264,6 +264,6 @@ private: /*********************************************************************** * The zero copy interface make function **********************************************************************/ -zero_copy_if::sptr usrp_e100_make_mmap_zero_copy(usrp_e100_iface::sptr iface){ - return zero_copy_if::sptr(new usrp_e100_mmap_zero_copy_impl(iface)); +zero_copy_if::sptr e100_make_mmap_zero_copy(e100_iface::sptr iface){ + return zero_copy_if::sptr(new e100_mmap_zero_copy_impl(iface)); } diff --git a/host/lib/usrp/e100/e100_regs.hpp b/host/lib/usrp/e100/e100_regs.hpp new file mode 100644 index 000000000..5be607389 --- /dev/null +++ b/host/lib/usrp/e100/e100_regs.hpp @@ -0,0 +1,242 @@ + + +//////////////////////////////////////////////////////////////// +// +// Memory map for embedded wishbone bus +// +//////////////////////////////////////////////////////////////// + +// All addresses are byte addresses. All accesses are word (16-bit) accesses. +// This means that address bit 0 is usually 0. +// There are 11 bits of address for the control. + +#ifndef INCLUDED_E100_REGS_HPP +#define INCLUDED_E100_REGS_HPP + +///////////////////////////////////////////////////// +// Slave pointers + +#define E100_REG_SLAVE(n) ((n)<<7) + +///////////////////////////////////////////////////// +// Slave 0 -- Misc Regs + +#define E100_REG_MISC_BASE E100_REG_SLAVE(0) + +#define E100_REG_MISC_LED E100_REG_MISC_BASE + 0 +#define E100_REG_MISC_SW E100_REG_MISC_BASE + 2 +#define E100_REG_MISC_CGEN_CTRL E100_REG_MISC_BASE + 4 +#define E100_REG_MISC_CGEN_ST E100_REG_MISC_BASE + 6 +#define E100_REG_MISC_TEST E100_REG_MISC_BASE + 8 +#define E100_REG_MISC_RX_LEN E100_REG_MISC_BASE + 10 +#define E100_REG_MISC_TX_LEN E100_REG_MISC_BASE + 12 +#define E100_REG_MISC_XFER_RATE E100_REG_MISC_BASE + 14 +#define E100_REG_MISC_COMPAT E100_REG_MISC_BASE + 16 + +///////////////////////////////////////////////////// +// Slave 1 -- UART +// CLKDIV is 16 bits, others are only 8 + +#define E100_REG_UART_BASE E100_REG_SLAVE(1) + +#define E100_REG_UART_CLKDIV E100_REG_UART_BASE + 0 +#define E100_REG_UART_TXLEVEL E100_REG_UART_BASE + 2 +#define E100_REG_UART_RXLEVEL E100_REG_UART_BASE + 4 +#define E100_REG_UART_TXCHAR E100_REG_UART_BASE + 6 +#define E100_REG_UART_RXCHAR E100_REG_UART_BASE + 8 + +///////////////////////////////////////////////////// +// Slave 2 -- SPI Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define E100_REG_SPI_BASE E100_REG_SLAVE(2) + +//spi slave constants +#define UE_SPI_SS_AD9522 (1 << 3) +#define UE_SPI_SS_AD9862 (1 << 2) +#define UE_SPI_SS_TX_DB (1 << 1) +#define UE_SPI_SS_RX_DB (1 << 0) + +//////////////////////////////////////////////// +// Slave 3 -- I2C Core +// This should be accessed through the IOCTL +// Users should not touch directly + +#define E100_REG_I2C_BASE E100_REG_SLAVE(3) + + +//////////////////////////////////////////////// +// Slave 4 -- GPIO + +#define E100_REG_GPIO_BASE E100_REG_SLAVE(4) + +#define E100_REG_GPIO_RX_IO E100_REG_GPIO_BASE + 0 +#define E100_REG_GPIO_TX_IO E100_REG_GPIO_BASE + 2 +#define E100_REG_GPIO_RX_DDR E100_REG_GPIO_BASE + 4 +#define E100_REG_GPIO_TX_DDR E100_REG_GPIO_BASE + 6 +#define E100_REG_GPIO_RX_SEL E100_REG_GPIO_BASE + 8 +#define E100_REG_GPIO_TX_SEL E100_REG_GPIO_BASE + 10 +#define E100_REG_GPIO_RX_DBG E100_REG_GPIO_BASE + 12 +#define E100_REG_GPIO_TX_DBG E100_REG_GPIO_BASE + 14 + +//possible bit values for sel when dbg is 0: +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic + +//possible bit values for sel when dbg is 1: +#define GPIO_SEL_DEBUG_0 0 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 1 // if pin is an output, debug lines from FPGA fabric + +/////////////////////////////////////////////////// +// Slave 6 -- ATR Controller +// 16 regs + +#define E100_REG_ATR_BASE E100_REG_SLAVE(6) + +#define E100_REG_ATR_IDLE_RXSIDE E100_REG_ATR_BASE + 0 +#define E100_REG_ATR_IDLE_TXSIDE E100_REG_ATR_BASE + 2 +#define E100_REG_ATR_INTX_RXSIDE E100_REG_ATR_BASE + 4 +#define E100_REG_ATR_INTX_TXSIDE E100_REG_ATR_BASE + 6 +#define E100_REG_ATR_INRX_RXSIDE E100_REG_ATR_BASE + 8 +#define E100_REG_ATR_INRX_TXSIDE E100_REG_ATR_BASE + 10 +#define E100_REG_ATR_FULL_RXSIDE E100_REG_ATR_BASE + 12 +#define E100_REG_ATR_FULL_TXSIDE E100_REG_ATR_BASE + 14 + +/////////////////////////////////////////////////// +// Slave 7 -- Readback Mux 32 + +#define E100_REG_RB_MUX_32_BASE E100_REG_SLAVE(7) + +#define E100_REG_RB_TIME_NOW_SECS E100_REG_RB_MUX_32_BASE + 0 +#define E100_REG_RB_TIME_NOW_TICKS E100_REG_RB_MUX_32_BASE + 4 +#define E100_REG_RB_TIME_PPS_SECS E100_REG_RB_MUX_32_BASE + 8 +#define E100_REG_RB_TIME_PPS_TICKS E100_REG_RB_MUX_32_BASE + 12 +#define E100_REG_RB_MISC_TEST32 E100_REG_RB_MUX_32_BASE + 16 + +//////////////////////////////////////////////////// +// Slave 8 -- Settings Bus +// +// Output-only, no readback, 64 registers total +// Each register must be written 64 bits at a time +// First the address xxx_xx00 and then xxx_xx10 + +// 64 total regs in address space +#define UE_SR_RX_CTRL0 0 // 9 regs (+0 to +8) +#define UE_SR_RX_DSP0 10 // 4 regs (+0 to +3) +#define UE_SR_RX_CTRL1 16 // 9 regs (+0 to +8) +#define UE_SR_RX_DSP1 26 // 4 regs (+0 to +3) +#define UE_SR_TX_CTRL 32 // 4 regs (+0 to +3) +#define UE_SR_TX_DSP 38 // 3 regs (+0 to +2) + +#define UE_SR_TIME64 42 // 6 regs (+0 to +5) +#define UE_SR_RX_FRONT 48 // 5 regs (+0 to +4) +#define UE_SR_TX_FRONT 54 // 5 regs (+0 to +4) + +#define UE_SR_REG_TEST32 60 // 1 reg +#define UE_SR_CLEAR_RX_FIFO 61 // 1 reg +#define UE_SR_CLEAR_TX_FIFO 62 // 1 reg +#define UE_SR_GLOBAL_RESET 63 // 1 reg + +#define E100_REG_SR_ADDR(n) (E100_REG_SLAVE(8) + (4*(n))) + +#define E100_REG_SR_MISC_TEST32 E100_REG_SR_ADDR(UE_SR_REG_TEST32) + +///////////////////////////////////////////////// +// Magic reset regs +//////////////////////////////////////////////// +#define E100_REG_CLEAR_RX E100_REG_SR_ADDR(UE_SR_CLEAR_RX_FIFO) +#define E100_REG_CLEAR_TX E100_REG_SR_ADDR(UE_SR_CLEAR_RX_FIFO) +#define E100_REG_GLOBAL_RESET E100_REG_SR_ADDR(UE_SR_GLOBAL_RESET) + +///////////////////////////////////////////////// +// DSP RX Regs +//////////////////////////////////////////////// +#define E100_REG_DSP_RX_HELPER(which, offset) ((which == 0)? \ + (E100_REG_SR_ADDR(UE_SR_RX_DSP0 + offset)) : \ + (E100_REG_SR_ADDR(UE_SR_RX_DSP1 + offset))) + +#define E100_REG_DSP_RX_FREQ(which) E100_REG_DSP_RX_HELPER(which, 0) +#define E100_REG_DSP_RX_DECIM(which) E100_REG_DSP_RX_HELPER(which, 2) +#define E100_REG_DSP_RX_MUX(which) E100_REG_DSP_RX_HELPER(which, 3) + +#define E100_FLAG_DSP_RX_MUX_SWAP_IQ (1 << 0) +#define E100_FLAG_DSP_RX_MUX_REAL_MODE (1 << 1) + +/////////////////////////////////////////////////// +// RX CTRL regs +/////////////////////////////////////////////////// +#define E100_REG_RX_CTRL_HELPER(which, offset) ((which == 0)? \ + (E100_REG_SR_ADDR(UE_SR_RX_CTRL0 + offset)) : \ + (E100_REG_SR_ADDR(UE_SR_RX_CTRL1 + offset))) + +#define E100_REG_RX_CTRL_STREAM_CMD(which) E100_REG_RX_CTRL_HELPER(which, 0) +#define E100_REG_RX_CTRL_TIME_SECS(which) E100_REG_RX_CTRL_HELPER(which, 1) +#define E100_REG_RX_CTRL_TIME_TICKS(which) E100_REG_RX_CTRL_HELPER(which, 2) +#define E100_REG_RX_CTRL_CLEAR(which) E100_REG_RX_CTRL_HELPER(which, 3) +#define E100_REG_RX_CTRL_VRT_HDR(which) E100_REG_RX_CTRL_HELPER(which, 4) +#define E100_REG_RX_CTRL_VRT_SID(which) E100_REG_RX_CTRL_HELPER(which, 5) +#define E100_REG_RX_CTRL_VRT_TLR(which) E100_REG_RX_CTRL_HELPER(which, 6) +#define E100_REG_RX_CTRL_NSAMPS_PP(which) E100_REG_RX_CTRL_HELPER(which, 7) +#define E100_REG_RX_CTRL_NCHANNELS(which) E100_REG_RX_CTRL_HELPER(which, 8) + +///////////////////////////////////////////////// +// RX FE +//////////////////////////////////////////////// +#define E100_REG_RX_FE_SWAP_IQ E100_REG_SR_ADDR(UE_SR_RX_FRONT + 0) //lower bit +#define E100_REG_RX_FE_MAG_CORRECTION E100_REG_SR_ADDR(UE_SR_RX_FRONT + 1) //18 bits +#define E100_REG_RX_FE_PHASE_CORRECTION E100_REG_SR_ADDR(UE_SR_RX_FRONT + 2) //18 bits +#define E100_REG_RX_FE_OFFSET_I E100_REG_SR_ADDR(UE_SR_RX_FRONT + 3) //18 bits +#define E100_REG_RX_FE_OFFSET_Q E100_REG_SR_ADDR(UE_SR_RX_FRONT + 4) //18 bits + +///////////////////////////////////////////////// +// DSP TX Regs +//////////////////////////////////////////////// +#define E100_REG_DSP_TX_FREQ E100_REG_SR_ADDR(UE_SR_TX_DSP + 0) +#define E100_REG_DSP_TX_SCALE_IQ E100_REG_SR_ADDR(UE_SR_TX_DSP + 1) +#define E100_REG_DSP_TX_INTERP_RATE E100_REG_SR_ADDR(UE_SR_TX_DSP + 2) + +/////////////////////////////////////////////////// +// TX CTRL regs +/////////////////////////////////////////////////// +#define E100_REG_TX_CTRL_NUM_CHAN E100_REG_SR_ADDR(UE_SR_TX_CTRL + 0) +#define E100_REG_TX_CTRL_CLEAR_STATE E100_REG_SR_ADDR(UE_SR_TX_CTRL + 1) +#define E100_REG_TX_CTRL_REPORT_SID E100_REG_SR_ADDR(UE_SR_TX_CTRL + 2) +#define E100_REG_TX_CTRL_POLICY E100_REG_SR_ADDR(UE_SR_TX_CTRL + 3) +#define E100_REG_TX_CTRL_CYCLES_PER_UP E100_REG_SR_ADDR(UE_SR_TX_CTRL + 4) +#define E100_REG_TX_CTRL_PACKETS_PER_UP E100_REG_SR_ADDR(UE_SR_TX_CTRL + 5) + +#define E100_FLAG_TX_CTRL_POLICY_WAIT (0x1 << 0) +#define E100_FLAG_TX_CTRL_POLICY_NEXT_PACKET (0x1 << 1) +#define E100_FLAG_TX_CTRL_POLICY_NEXT_BURST (0x1 << 2) + +///////////////////////////////////////////////// +// TX FE +//////////////////////////////////////////////// +#define E100_REG_TX_FE_DC_OFFSET_I E100_REG_SR_ADDR(UE_SR_TX_FRONT + 0) //24 bits +#define E100_REG_TX_FE_DC_OFFSET_Q E100_REG_SR_ADDR(UE_SR_TX_FRONT + 1) //24 bits +#define E100_REG_TX_FE_MAC_CORRECTION E100_REG_SR_ADDR(UE_SR_TX_FRONT + 2) //18 bits +#define E100_REG_TX_FE_PHASE_CORRECTION E100_REG_SR_ADDR(UE_SR_TX_FRONT + 3) //18 bits +#define E100_REG_TX_FE_MUX E100_REG_SR_ADDR(UE_SR_TX_FRONT + 4) //8 bits (std output = 0x10, reversed = 0x01) + +///////////////////////////////////////////////// +// VITA49 64 bit time (write only) +//////////////////////////////////////////////// +#define E100_REG_TIME64_SECS E100_REG_SR_ADDR(UE_SR_TIME64 + 0) +#define E100_REG_TIME64_TICKS E100_REG_SR_ADDR(UE_SR_TIME64 + 1) +#define E100_REG_TIME64_FLAGS E100_REG_SR_ADDR(UE_SR_TIME64 + 2) +#define E100_REG_TIME64_IMM E100_REG_SR_ADDR(UE_SR_TIME64 + 3) +#define E100_REG_TIME64_TPS E100_REG_SR_ADDR(UE_SR_TIME64 + 4) +#define E100_REG_TIME64_MIMO_SYNC E100_REG_SR_ADDR(UE_SR_TIME64 + 5) + +//pps flags (see above) +#define E100_FLAG_TIME64_PPS_NEGEDGE (0 << 0) +#define E100_FLAG_TIME64_PPS_POSEDGE (1 << 0) +#define E100_FLAG_TIME64_PPS_SMA (0 << 1) +#define E100_FLAG_TIME64_PPS_MIMO (1 << 1) + +#define E100_FLAG_TIME64_LATCH_NOW 1 +#define E100_FLAG_TIME64_LATCH_NEXT_PPS 0 + +#endif + diff --git a/host/lib/usrp/usrp_e100/fpga_downloader.cpp b/host/lib/usrp/e100/fpga_downloader.cpp index a7449d3b1..7074c8299 100644 --- a/host/lib/usrp/usrp_e100/fpga_downloader.cpp +++ b/host/lib/usrp/e100/fpga_downloader.cpp @@ -245,7 +245,7 @@ static void send_file_to_fpga(const std::string &file_name, gpio &error, gpio &d }//namespace usrp_e_fpga_downloader_utility -void usrp_e100_load_fpga(const std::string &bin_file){ +void e100_load_fpga(const std::string &bin_file){ using namespace usrp_e_fpga_downloader_utility; gpio gpio_prog_b(PROG_B, OUT); @@ -254,9 +254,9 @@ void usrp_e100_load_fpga(const std::string &bin_file){ UHD_MSG(status) << "Loading FPGA image: " << bin_file << "... " << std::flush; - if(std::system("/sbin/rmmod usrp_e") != 0){ - UHD_MSG(warning) << "USRP-E100 FPGA downloader: could not unload usrp_e module" << std::endl; - } +// if(std::system("/sbin/rmmod usrp_e") != 0){ +// UHD_MSG(warning) << "USRP-E100 FPGA downloader: could not unload usrp_e module" << std::endl; +// } prepare_fpga_for_configuration(gpio_prog_b, gpio_init_b); @@ -264,9 +264,9 @@ void usrp_e100_load_fpga(const std::string &bin_file){ send_file_to_fpga(bin_file, gpio_init_b, gpio_done); - if(std::system("/sbin/modprobe usrp_e") != 0){ - UHD_MSG(warning) << "USRP-E100 FPGA downloader: could not load usrp_e module" << std::endl; - } +// if(std::system("/sbin/modprobe usrp_e") != 0){ +// UHD_MSG(warning) << "USRP-E100 FPGA downloader: could not load usrp_e module" << std::endl; +// } } diff --git a/host/lib/usrp/usrp_e100/include/linux/usrp_e.h b/host/lib/usrp/e100/include/linux/usrp_e.h index 4c6a5dd89..4c6a5dd89 100644 --- a/host/lib/usrp/usrp_e100/include/linux/usrp_e.h +++ b/host/lib/usrp/e100/include/linux/usrp_e.h diff --git a/host/lib/usrp/usrp_e100/io_impl.cpp b/host/lib/usrp/e100/io_impl.cpp index 998a715fe..dc0d959fa 100644 --- a/host/lib/usrp/usrp_e100/io_impl.cpp +++ b/host/lib/usrp/e100/io_impl.cpp @@ -17,8 +17,8 @@ #include "../../transport/super_recv_packet_handler.hpp" #include "../../transport/super_send_packet_handler.hpp" -#include "usrp_e100_impl.hpp" -#include "usrp_e100_regs.hpp" +#include "e100_impl.hpp" +#include "e100_regs.hpp" #include <uhd/utils/msg.hpp> #include <uhd/utils/log.hpp> #include <uhd/usrp/dsp_utils.hpp> @@ -36,12 +36,23 @@ using namespace uhd::usrp; using namespace uhd::transport; /*********************************************************************** - * Constants + * Helpers **********************************************************************/ -static const size_t rx_data_inline_sid = 1; -static const size_t tx_async_report_sid = 2; -static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET; -#define fp_recv_debug false +#if 1 +# define debug_print_buff(...) +#else +static void debug_print_buff(const std::string &what, managed_recv_buffer::sptr buff){ + std::ostringstream ss; + ss << boost::format( + "This is a %s packet, %u bytes.\n" + ) % what % buff->size(); + for (size_t i = 0; i < 9; i++){ + ss << boost::format(" buff[%u] = 0x%08x\n") % i % buff->cast<const boost::uint32_t *>()[i]; + } + ss << std::endl << std::endl; + UHD_MSG(status) << ss.str(); +} +#endif /*********************************************************************** * io impl details (internal to this file) @@ -50,25 +61,29 @@ static const int underflow_flags = async_metadata_t::EVENT_CODE_UNDERFLOW | asyn * - thread loop * - vrt packet handler states **********************************************************************/ -struct usrp_e100_impl::io_impl{ +struct e100_impl::io_impl{ io_impl(zero_copy_if::sptr &xport): data_xport(xport), - recv_pirate_booty(data_xport->get_num_recv_frames()), async_msg_fifo(100/*messages deep*/) { - /* NOP */ + for (size_t i = 0; i < E100_NUM_RX_DSPS; i++){ + typedef bounded_buffer<managed_recv_buffer::sptr> booty_type; + recv_pirate_booty.push_back(new booty_type(data_xport->get_num_recv_frames())); + } } ~io_impl(void){ - recv_pirate_crew_raiding = false; recv_pirate_crew.interrupt_all(); recv_pirate_crew.join_all(); + for (size_t i = 0; i < recv_pirate_booty.size(); i++){ + delete recv_pirate_booty[i]; + } } - managed_recv_buffer::sptr get_recv_buff(double timeout){ + managed_recv_buffer::sptr get_recv_buff(const size_t index, double timeout){ boost::this_thread::disable_interruption di; //disable because the wait can throw managed_recv_buffer::sptr buff; - recv_pirate_booty.pop_with_timed_wait(buff, timeout); + recv_pirate_booty[index]->pop_with_timed_wait(buff, timeout); return buff; //ASSUME buff == NULL when pop times-out } @@ -83,11 +98,10 @@ struct usrp_e100_impl::io_impl{ bool continuous_streaming; //a pirate's life is the life for me! - void recv_pirate_loop(boost::barrier &, usrp_e100_clock_ctrl::sptr); - bounded_buffer<managed_recv_buffer::sptr> recv_pirate_booty; + void recv_pirate_loop(boost::barrier &, e100_clock_ctrl::sptr); + std::vector<bounded_buffer<managed_recv_buffer::sptr> *> recv_pirate_booty; bounded_buffer<async_metadata_t> async_msg_fifo; boost::thread_group recv_pirate_crew; - bool recv_pirate_crew_raiding; }; /*********************************************************************** @@ -95,112 +109,78 @@ struct usrp_e100_impl::io_impl{ * - while raiding, loot for recv buffers * - put booty into the alignment buffer **********************************************************************/ -void usrp_e100_impl::io_impl::recv_pirate_loop( - boost::barrier &spawn_barrier, usrp_e100_clock_ctrl::sptr clock_ctrl +void e100_impl::io_impl::recv_pirate_loop( + boost::barrier &spawn_barrier, e100_clock_ctrl::sptr clock_ctrl ){ - recv_pirate_crew_raiding = true; spawn_barrier.wait(); set_thread_priority_safe(); - while(recv_pirate_crew_raiding){ + while (not boost::this_thread::interruption_requested()){ managed_recv_buffer::sptr buff = this->data_xport->get_recv_buff(); - if (not buff.get()) continue; //ignore timeout/error buffers - - if (fp_recv_debug){ - std::ostringstream ss; - ss << "len " << buff->size() << std::endl; - for (size_t i = 0; i < 9; i++){ - ss << boost::format(" 0x%08x") % buff->cast<const boost::uint32_t *>()[i] << std::endl; - } - ss << std::endl << std::endl; - UHD_LOGV(always) << ss.str(); + if (buff.get() == NULL) continue; //ignore timeout buffers + + //handle an rx data packet or inline message + const boost::uint32_t *vrt_hdr = buff->cast<const boost::uint32_t *>(); + const size_t rx_index = uhd::wtohx(vrt_hdr[1]) - E100_DSP_SID_BASE; + if (rx_index < E100_NUM_RX_DSPS){ + debug_print_buff("data", buff); + recv_pirate_booty[rx_index]->push_with_wait(buff); + continue; } - try{ - //extract the vrt header packet info - vrt::if_packet_info_t if_packet_info; - if_packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); - const boost::uint32_t *vrt_hdr = buff->cast<const boost::uint32_t *>(); - - //handle an rx data packet or inline message - if (uhd::wtohx(vrt_hdr[1]) == rx_data_inline_sid){ //ASSUME has_sid - if (fp_recv_debug) UHD_LOGV(always) << "this is rx_data_inline_sid\n"; - //same number of frames as the data transport -> always immediate - recv_pirate_booty.push_with_wait(buff); - continue; - } - - //unpack the vrt header and process below... - vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info); - - //handle a tx async report message - if (if_packet_info.sid == tx_async_report_sid and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ - if (fp_recv_debug) UHD_LOGV(always) << "this is tx_async_report_sid\n"; - - //fill in the async metadata - async_metadata_t metadata; - metadata.channel = 0; - metadata.has_time_spec = if_packet_info.has_tsi and if_packet_info.has_tsf; - metadata.time_spec = time_spec_t( - time_t(if_packet_info.tsi), size_t(if_packet_info.tsf), clock_ctrl->get_fpga_clock_rate() - ); - metadata.event_code = async_metadata_t::event_code_t(sph::get_context_code(vrt_hdr, if_packet_info)); - - //print the famous U, and push the metadata into the message queue - if (metadata.event_code & underflow_flags) UHD_MSG(fastpath) << "U"; - async_msg_fifo.push_with_pop_on_full(metadata); - continue; - } - - //TODO replace this below with a UHD_MSG(error) - if (fp_recv_debug) UHD_LOGV(always) << "this is unknown packet\n"; + //otherwise, unpack the vrt header and process below... + vrt::if_packet_info_t if_packet_info; + if_packet_info.num_packet_words32 = buff->size()/sizeof(boost::uint32_t); + try{vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info);} + catch(const std::exception &e){ + UHD_MSG(error) << "Error unpacking vrt header:\n" << e.what() << std::endl; + continue; + } - }catch(const std::exception &e){ - UHD_MSG(error) << "Error (usrp-e recv pirate loop): " << e.what() << std::endl; + //handle a tx async report message + if (if_packet_info.sid == E100_ASYNC_SID and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ + debug_print_buff("async", buff); + + //fill in the async metadata + async_metadata_t metadata; + metadata.channel = 0; + metadata.has_time_spec = if_packet_info.has_tsi and if_packet_info.has_tsf; + metadata.time_spec = time_spec_t( + time_t(if_packet_info.tsi), long(if_packet_info.tsf), clock_ctrl->get_fpga_clock_rate() + ); + metadata.event_code = async_metadata_t::event_code_t(sph::get_context_code(vrt_hdr, if_packet_info)); + async_msg_fifo.push_with_pop_on_full(metadata); + if (metadata.event_code & + ( async_metadata_t::EVENT_CODE_UNDERFLOW + | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET) + ) UHD_MSG(fastpath) << "U"; + else if (metadata.event_code & + ( async_metadata_t::EVENT_CODE_SEQ_ERROR + | async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST) + ) UHD_MSG(fastpath) << "S"; + continue; } + + debug_print_buff("unknown", buff); } } /*********************************************************************** * Helper Functions **********************************************************************/ -void usrp_e100_impl::io_init(void){ - //setup otw types - _send_otw_type.width = 16; - _send_otw_type.shift = 0; - _send_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; - - _recv_otw_type.width = 16; - _recv_otw_type.shift = 0; - _recv_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; +void e100_impl::io_init(void){ //setup before the registers (transport called to calculate max spp) _io_impl = UHD_PIMPL_MAKE(io_impl, (_data_xport)); //clear state machines - _iface->poke32(UE_REG_CTRL_RX_CLEAR, 0); - _iface->poke32(UE_REG_CTRL_TX_CLEAR, 0); - - //setup rx data path - _iface->poke32(UE_REG_CTRL_RX_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); - _iface->poke32(UE_REG_CTRL_RX_NCHANNELS, 1); - _iface->poke32(UE_REG_CTRL_RX_VRT_HEADER, 0 - | (0x1 << 28) //if data with stream id - | (0x1 << 26) //has trailer - | (0x3 << 22) //integer time other - | (0x1 << 20) //fractional time sample count - ); - _iface->poke32(UE_REG_CTRL_RX_VRT_STREAM_ID, rx_data_inline_sid); - _iface->poke32(UE_REG_CTRL_RX_VRT_TRAILER, 0); - - //setup the tx policy - _iface->poke32(UE_REG_CTRL_TX_REPORT_SID, tx_async_report_sid); - _iface->poke32(UE_REG_CTRL_TX_POLICY, UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET); + _iface->poke32(E100_REG_CLEAR_RX, 0); + _iface->poke32(E100_REG_CLEAR_TX, 0); //spawn a pirate, yarrr! boost::barrier spawn_barrier(2); _io_impl->recv_pirate_crew.create_thread(boost::bind( - &usrp_e100_impl::io_impl::recv_pirate_loop, _io_impl.get(), + &e100_impl::io_impl::recv_pirate_loop, _io_impl.get(), boost::ref(spawn_barrier), _clock_ctrl )); spawn_barrier.wait(); @@ -208,7 +188,7 @@ void usrp_e100_impl::io_init(void){ update_xport_channel_mapping(); } -void usrp_e100_impl::update_xport_channel_mapping(void){ +void e100_impl::update_xport_channel_mapping(void){ if (_io_impl.get() == NULL) return; //not inited yet //set all of the relevant properties on the handler @@ -216,13 +196,14 @@ void usrp_e100_impl::update_xport_channel_mapping(void){ _io_impl->recv_handler.resize(_rx_subdev_spec.size()); _io_impl->recv_handler.set_vrt_unpacker(&vrt::if_hdr_unpack_le); _io_impl->recv_handler.set_tick_rate(_clock_ctrl->get_fpga_clock_rate()); - _io_impl->recv_handler.set_samp_rate(_rx_ddc_proxy->get_link()[DSP_PROP_HOST_RATE].as<double>()); + //FIXME assumes homogeneous rates across all dsp + _io_impl->recv_handler.set_samp_rate(_rx_dsp_proxies[_rx_dsp_proxies.keys().at(0)]->get_link()[DSP_PROP_HOST_RATE].as<double>()); for (size_t chan = 0; chan < _io_impl->recv_handler.size(); chan++){ _io_impl->recv_handler.set_xport_chan_get_buff(chan, boost::bind( - &usrp_e100_impl::io_impl::get_recv_buff, _io_impl.get(), _1 + &e100_impl::io_impl::get_recv_buff, _io_impl.get(), chan, _1 )); _io_impl->recv_handler.set_overflow_handler(chan, boost::bind( - &usrp_e100_impl::handle_overrun, this, chan + &e100_impl::handle_overrun, this, chan )); } _io_impl->recv_handler.set_converter(_recv_otw_type); @@ -232,7 +213,8 @@ void usrp_e100_impl::update_xport_channel_mapping(void){ _io_impl->send_handler.resize(_tx_subdev_spec.size()); _io_impl->send_handler.set_vrt_packer(&vrt::if_hdr_pack_le); _io_impl->send_handler.set_tick_rate(_clock_ctrl->get_fpga_clock_rate()); - _io_impl->send_handler.set_samp_rate(_tx_duc_proxy->get_link()[DSP_PROP_HOST_RATE].as<double>()); + //FIXME assumes homogeneous rates across all dsp + _io_impl->send_handler.set_samp_rate(_tx_dsp_proxies[_tx_dsp_proxies.keys().at(0)]->get_link()[DSP_PROP_HOST_RATE].as<double>()); for (size_t chan = 0; chan < _io_impl->send_handler.size(); chan++){ _io_impl->send_handler.set_xport_chan_get_buff(chan, boost::bind( &uhd::transport::zero_copy_if::get_send_buff, _io_impl->data_xport, _1 @@ -242,23 +224,23 @@ void usrp_e100_impl::update_xport_channel_mapping(void){ _io_impl->send_handler.set_max_samples_per_packet(get_max_send_samps_per_packet()); } -void usrp_e100_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd){ +void e100_impl::issue_ddc_stream_cmd(const stream_cmd_t &stream_cmd, const size_t index){ _io_impl->continuous_streaming = (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS); - _iface->poke32(UE_REG_CTRL_RX_STREAM_CMD, dsp_type1::calc_stream_cmd_word(stream_cmd)); - _iface->poke32(UE_REG_CTRL_RX_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); - _iface->poke32(UE_REG_CTRL_RX_TIME_TICKS, stream_cmd.time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); + _iface->poke32(E100_REG_RX_CTRL_STREAM_CMD(index), dsp_type1::calc_stream_cmd_word(stream_cmd)); + _iface->poke32(E100_REG_RX_CTRL_TIME_SECS(index), boost::uint32_t(stream_cmd.time_spec.get_full_secs())); + _iface->poke32(E100_REG_RX_CTRL_TIME_TICKS(index), stream_cmd.time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); } -void usrp_e100_impl::handle_overrun(size_t /*chan*/){ +void e100_impl::handle_overrun(const size_t index){ if (_io_impl->continuous_streaming){ - this->issue_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS, index); } } /*********************************************************************** * Data Send **********************************************************************/ -size_t usrp_e100_impl::get_max_send_samps_per_packet(void) const{ +size_t e100_impl::get_max_send_samps_per_packet(void) const{ static const size_t hdr_size = 0 + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) - sizeof(vrt::if_packet_info_t().cid) //no class id ever used @@ -267,7 +249,7 @@ size_t usrp_e100_impl::get_max_send_samps_per_packet(void) const{ return bpp/_send_otw_type.get_sample_size(); } -size_t usrp_e100_impl::send( +size_t e100_impl::send( const send_buffs_type &buffs, size_t nsamps_per_buff, const tx_metadata_t &metadata, const io_type_t &io_type, send_mode_t send_mode, double timeout @@ -282,7 +264,7 @@ size_t usrp_e100_impl::send( /*********************************************************************** * Data Recv **********************************************************************/ -size_t usrp_e100_impl::get_max_recv_samps_per_packet(void) const{ +size_t e100_impl::get_max_recv_samps_per_packet(void) const{ static const size_t hdr_size = 0 + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer @@ -292,7 +274,7 @@ size_t usrp_e100_impl::get_max_recv_samps_per_packet(void) const{ return bpp/_recv_otw_type.get_sample_size(); } -size_t usrp_e100_impl::recv( +size_t e100_impl::recv( const recv_buffs_type &buffs, size_t nsamps_per_buff, rx_metadata_t &metadata, const io_type_t &io_type, recv_mode_t recv_mode, double timeout @@ -307,7 +289,7 @@ size_t usrp_e100_impl::recv( /*********************************************************************** * Async Recv **********************************************************************/ -bool usrp_e100_impl::recv_async_msg( +bool e100_impl::recv_async_msg( async_metadata_t &async_metadata, double timeout ){ boost::this_thread::disable_interruption di; //disable because the wait can throw diff --git a/host/lib/usrp/usrp_e100/mboard_impl.cpp b/host/lib/usrp/e100/mboard_impl.cpp index f4b8d79f6..e7a46fe8e 100644 --- a/host/lib/usrp/usrp_e100/mboard_impl.cpp +++ b/host/lib/usrp/e100/mboard_impl.cpp @@ -15,8 +15,8 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -#include "usrp_e100_impl.hpp" -#include "usrp_e100_regs.hpp" +#include "e100_impl.hpp" +#include "e100_regs.hpp" #include <uhd/utils/msg.hpp> #include <uhd/exception.hpp> #include <uhd/usrp/dsp_utils.hpp> @@ -30,10 +30,10 @@ using namespace uhd::usrp; /*********************************************************************** * Mboard Initialization **********************************************************************/ -void usrp_e100_impl::mboard_init(void){ +void e100_impl::mboard_init(void){ _mboard_proxy = wax_obj_proxy::make( - boost::bind(&usrp_e100_impl::mboard_get, this, _1, _2), - boost::bind(&usrp_e100_impl::mboard_set, this, _1, _2) + boost::bind(&e100_impl::mboard_get, this, _1, _2), + boost::bind(&e100_impl::mboard_set, this, _1, _2) ); //init the clock config @@ -41,18 +41,18 @@ void usrp_e100_impl::mboard_init(void){ update_clock_config(); } -void usrp_e100_impl::update_clock_config(void){ +void e100_impl::update_clock_config(void){ boost::uint32_t pps_flags = 0; //translate pps polarity enums switch(_clock_config.pps_polarity){ - case clock_config_t::PPS_POS: pps_flags |= UE_FLAG_TIME64_PPS_POSEDGE; break; - case clock_config_t::PPS_NEG: pps_flags |= UE_FLAG_TIME64_PPS_NEGEDGE; break; + case clock_config_t::PPS_POS: pps_flags |= E100_FLAG_TIME64_PPS_POSEDGE; break; + case clock_config_t::PPS_NEG: pps_flags |= E100_FLAG_TIME64_PPS_NEGEDGE; break; default: throw uhd::value_error("unhandled clock configuration pps polarity"); } //set the pps flags - _iface->poke32(UE_REG_TIME64_FLAGS, pps_flags); + _iface->poke32(E100_REG_TIME64_FLAGS, pps_flags); //clock source ref 10mhz switch(_clock_config.ref_source){ @@ -66,13 +66,14 @@ void usrp_e100_impl::update_clock_config(void){ /*********************************************************************** * Mboard Get **********************************************************************/ -void usrp_e100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ +void e100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); + static const std::string dboard_name = "A"; //handle the get request conditioned on the key switch(key.as<mboard_prop_t>()){ case MBOARD_PROP_NAME: - val = std::string("usrp-e mboard"); + val = std::string(_iface->get_cname() + " mboard"); return; case MBOARD_PROP_OTHERS: @@ -80,39 +81,37 @@ void usrp_e100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_RX_DBOARD: - UHD_ASSERT_THROW(key.name == ""); + UHD_ASSERT_THROW(key.name == dboard_name); val = _rx_dboard_proxy->get_link(); return; case MBOARD_PROP_RX_DBOARD_NAMES: - val = prop_names_t(1, ""); //vector of size 1 with empty string + val = prop_names_t(1, dboard_name); return; case MBOARD_PROP_TX_DBOARD: - UHD_ASSERT_THROW(key.name == ""); + UHD_ASSERT_THROW(key.name == dboard_name); val = _tx_dboard_proxy->get_link(); return; case MBOARD_PROP_TX_DBOARD_NAMES: - val = prop_names_t(1, ""); //vector of size 1 with empty string + val = prop_names_t(1, dboard_name); return; case MBOARD_PROP_RX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _rx_ddc_proxy->get_link(); + val = _rx_dsp_proxies[key.name]->get_link(); return; case MBOARD_PROP_RX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _rx_dsp_proxies.keys(); return; case MBOARD_PROP_TX_DSP: - UHD_ASSERT_THROW(key.name == ""); - val = _tx_duc_proxy->get_link(); + val = _tx_dsp_proxies[key.name]->get_link(); return; case MBOARD_PROP_TX_DSP_NAMES: - val = prop_names_t(1, ""); + val = _tx_dsp_proxies.keys(); return; case MBOARD_PROP_CLOCK_CONFIG: @@ -132,17 +131,17 @@ void usrp_e100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_TIME_NOW: while(true){ - uint32_t secs = _iface->peek32(UE_REG_RB_TIME_NOW_SECS); - uint32_t ticks = _iface->peek32(UE_REG_RB_TIME_NOW_TICKS); - if (secs != _iface->peek32(UE_REG_RB_TIME_NOW_SECS)) continue; + uint32_t secs = _iface->peek32(E100_REG_RB_TIME_NOW_SECS); + uint32_t ticks = _iface->peek32(E100_REG_RB_TIME_NOW_TICKS); + if (secs != _iface->peek32(E100_REG_RB_TIME_NOW_SECS)) continue; val = time_spec_t(secs, ticks, _clock_ctrl->get_fpga_clock_rate()); return; } case MBOARD_PROP_TIME_PPS: while(true){ - uint32_t secs = _iface->peek32(UE_REG_RB_TIME_PPS_SECS); - uint32_t ticks = _iface->peek32(UE_REG_RB_TIME_PPS_TICKS); - if (secs != _iface->peek32(UE_REG_RB_TIME_PPS_SECS)) continue; + uint32_t secs = _iface->peek32(E100_REG_RB_TIME_PPS_SECS); + uint32_t ticks = _iface->peek32(E100_REG_RB_TIME_PPS_TICKS); + if (secs != _iface->peek32(E100_REG_RB_TIME_PPS_SECS)) continue; val = time_spec_t(secs, ticks, _clock_ctrl->get_fpga_clock_rate()); return; } @@ -158,38 +157,73 @@ void usrp_e100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ /*********************************************************************** * Mboard Set **********************************************************************/ -void usrp_e100_impl::mboard_set(const wax::obj &key, const wax::obj &val){ +void e100_impl::mboard_set(const wax::obj &key, const wax::obj &val){ //handle the get request conditioned on the key switch(key.as<mboard_prop_t>()){ case MBOARD_PROP_TIME_NOW: case MBOARD_PROP_TIME_PPS:{ time_spec_t time_spec = val.as<time_spec_t>(); - _iface->poke32(UE_REG_TIME64_TICKS, time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); + _iface->poke32(E100_REG_TIME64_TICKS, time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); boost::uint32_t imm_flags = (key.as<mboard_prop_t>() == MBOARD_PROP_TIME_NOW)? 1 : 0; - _iface->poke32(UE_REG_TIME64_IMM, imm_flags); - _iface->poke32(UE_REG_TIME64_SECS, time_spec.get_full_secs()); + _iface->poke32(E100_REG_TIME64_IMM, imm_flags); + _iface->poke32(E100_REG_TIME64_SECS, time_spec.get_full_secs()); } return; - case MBOARD_PROP_RX_SUBDEV_SPEC: + case MBOARD_PROP_RX_SUBDEV_SPEC:{ _rx_subdev_spec = val.as<subdev_spec_t>(); verify_rx_subdev_spec(_rx_subdev_spec, _mboard_proxy->get_link()); //sanity check - UHD_ASSERT_THROW(_rx_subdev_spec.size() == 1); - //set the mux - _iface->poke32(UE_REG_DSP_RX_MUX, dsp_type1::calc_rx_mux_word( - _dboard_manager->get_rx_subdev(_rx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() - )); - return; + UHD_ASSERT_THROW(_rx_subdev_spec.size() <= E100_NUM_RX_DSPS); + + //determine frontend swap IQ from the first channel + bool fe_swap_iq = false; + switch(_dboard_manager->get_rx_subdev(_rx_subdev_spec.at(0).sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>()){ + case SUBDEV_CONN_COMPLEX_QI: + case SUBDEV_CONN_REAL_Q: + fe_swap_iq = true; + break; + default: fe_swap_iq = false; + } + _iface->poke32(E100_REG_RX_FE_SWAP_IQ, fe_swap_iq? 1 : 0); + + //set the dsp mux for each channel + for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ + bool iq_swap = false, real_mode = false; + switch(_dboard_manager->get_rx_subdev(_rx_subdev_spec.at(i).sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>()){ + case SUBDEV_CONN_COMPLEX_IQ: + iq_swap = fe_swap_iq; + real_mode = false; + break; + case SUBDEV_CONN_COMPLEX_QI: + iq_swap = not fe_swap_iq; + real_mode = false; + break; + case SUBDEV_CONN_REAL_I: + iq_swap = fe_swap_iq; + real_mode = true; + break; + case SUBDEV_CONN_REAL_Q: + iq_swap = not fe_swap_iq; + real_mode = true; + break; + } + _iface->poke32(E100_REG_DSP_RX_MUX(i), + (iq_swap? E100_FLAG_DSP_RX_MUX_SWAP_IQ : 0) | + (real_mode? E100_FLAG_DSP_RX_MUX_REAL_MODE : 0) + ); + } + this->update_xport_channel_mapping(); + }return; case MBOARD_PROP_TX_SUBDEV_SPEC: _tx_subdev_spec = val.as<subdev_spec_t>(); verify_tx_subdev_spec(_tx_subdev_spec, _mboard_proxy->get_link()); //sanity check - UHD_ASSERT_THROW(_tx_subdev_spec.size() == 1); + UHD_ASSERT_THROW(_tx_subdev_spec.size() <= E100_NUM_TX_DSPS); //set the mux - _iface->poke32(UE_REG_DSP_TX_MUX, dsp_type1::calc_tx_mux_word( + _iface->poke32(E100_REG_TX_FE_MUX, dsp_type1::calc_tx_mux_word( _dboard_manager->get_tx_subdev(_tx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() )); return; diff --git a/host/lib/usrp/usrp2/dsp_impl.cpp b/host/lib/usrp/usrp2/dsp_impl.cpp index 03cdeae42..d9cde3f13 100644 --- a/host/lib/usrp/usrp2/dsp_impl.cpp +++ b/host/lib/usrp/usrp2/dsp_impl.cpp @@ -173,12 +173,6 @@ void usrp2_mboard_impl::ddc_set(const wax::obj &key_, const wax::obj &val, size_ //set the decimation _iface->poke32(U2_REG_DSP_RX_DECIM(which_dsp), dsp_type1::calc_cic_filter_word(_dsp_impl->ddc_decim[which_dsp])); - - //set the scaling - static const boost::int16_t default_rx_scale_iq = 1024; - _iface->poke32(U2_REG_DSP_RX_SCALE_IQ(which_dsp), - dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) - ); } _device.update_xport_channel_mapping(); //rate changed -> update return; diff --git a/host/lib/usrp/usrp2/fw_common.h b/host/lib/usrp/usrp2/fw_common.h index e5c60f27c..21abc6aed 100644 --- a/host/lib/usrp/usrp2/fw_common.h +++ b/host/lib/usrp/usrp2/fw_common.h @@ -30,7 +30,7 @@ extern "C" { #endif //fpga and firmware compatibility numbers -#define USRP2_FPGA_COMPAT_NUM 6 +#define USRP2_FPGA_COMPAT_NUM 7 #define USRP2_FW_COMPAT_NUM 10 //used to differentiate control packets over data port diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index 6bf412a3e..197296cf0 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -289,10 +289,10 @@ void usrp2_mboard_impl::set_time_spec(const time_spec_t &time_spec, bool now){ /*********************************************************************** * MBoard Get Properties **********************************************************************/ -static const std::string dboard_name = "0"; - void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ named_prop_t key = named_prop_t::extract(key_); + static const std::string dboard_name = "A"; + //handle the get request conditioned on the key switch(key.as<mboard_prop_t>()){ case MBOARD_PROP_NAME: @@ -304,7 +304,7 @@ void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_RX_DBOARD: - UHD_ASSERT_THROW(key.name == dboard_name); + UHD_ASSERT_THROW(key.name == dboard_name or key.name == "0"); //allow for old name to work val = _rx_dboard_proxy->get_link(); return; @@ -313,7 +313,7 @@ void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ return; case MBOARD_PROP_TX_DBOARD: - UHD_ASSERT_THROW(key.name == dboard_name); + UHD_ASSERT_THROW(key.name == dboard_name or key.name == "0"); //allow for old name to work val = _tx_dboard_proxy->get_link(); return; @@ -429,19 +429,51 @@ void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ set_time_spec(val.as<time_spec_t>(), false); return; - case MBOARD_PROP_RX_SUBDEV_SPEC: + case MBOARD_PROP_RX_SUBDEV_SPEC:{ _rx_subdev_spec = val.as<subdev_spec_t>(); verify_rx_subdev_spec(_rx_subdev_spec, this->get_link()); //sanity check UHD_ASSERT_THROW(_rx_subdev_spec.size() <= NUM_RX_DSPS); - //set the mux + + //determine frontend swap IQ from the first channel + bool fe_swap_iq = false; + switch(_dboard_manager->get_rx_subdev(_rx_subdev_spec.at(0).sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>()){ + case SUBDEV_CONN_COMPLEX_QI: + case SUBDEV_CONN_REAL_Q: + fe_swap_iq = true; + break; + default: fe_swap_iq = false; + } + _iface->poke32(U2_REG_RX_FE_SWAP_IQ, fe_swap_iq? 1 : 0); + + //set the dsp mux for each channel for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ - _iface->poke32(U2_REG_DSP_RX_MUX(i), dsp_type1::calc_rx_mux_word( - _dboard_manager->get_rx_subdev(_rx_subdev_spec[i].sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() - )); + bool iq_swap = false, real_mode = false; + switch(_dboard_manager->get_rx_subdev(_rx_subdev_spec.at(i).sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>()){ + case SUBDEV_CONN_COMPLEX_IQ: + iq_swap = fe_swap_iq; + real_mode = false; + break; + case SUBDEV_CONN_COMPLEX_QI: + iq_swap = not fe_swap_iq; + real_mode = false; + break; + case SUBDEV_CONN_REAL_I: + iq_swap = fe_swap_iq; + real_mode = true; + break; + case SUBDEV_CONN_REAL_Q: + iq_swap = not fe_swap_iq; + real_mode = true; + break; + } + _iface->poke32(U2_REG_DSP_RX_MUX(i), + (iq_swap? U2_FLAG_DSP_RX_MUX_SWAP_IQ : 0) | + (real_mode? U2_FLAG_DSP_RX_MUX_REAL_MODE : 0) + ); } _device.update_xport_channel_mapping(); - return; + }return; case MBOARD_PROP_TX_SUBDEV_SPEC: _tx_subdev_spec = val.as<subdev_spec_t>(); @@ -450,7 +482,7 @@ void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ UHD_ASSERT_THROW(_tx_subdev_spec.size() <= NUM_TX_DSPS); //set the mux for (size_t i = 0; i < _rx_subdev_spec.size(); i++){ - _iface->poke32(U2_REG_DSP_TX_MUX, dsp_type1::calc_tx_mux_word( + _iface->poke32(U2_REG_TX_FE_MUX, dsp_type1::calc_tx_mux_word( _dboard_manager->get_tx_subdev(_tx_subdev_spec[i].sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() )); } diff --git a/host/lib/usrp/usrp2/usrp2_regs.hpp b/host/lib/usrp/usrp2/usrp2_regs.hpp index dbb78275b..19c1b45f1 100644 --- a/host/lib/usrp/usrp2/usrp2_regs.hpp +++ b/host/lib/usrp/usrp2/usrp2_regs.hpp @@ -120,12 +120,29 @@ #define U2_REG_TIME64_TICKS_RB_PPS READBACK_BASE + 4*15 ///////////////////////////////////////////////// +// RX FE +//////////////////////////////////////////////// +#define U2_REG_RX_FE_SWAP_IQ U2_REG_SR_ADDR(SR_RX_FRONT + 0) //lower bit +#define U2_REG_RX_FE_MAG_CORRECTION U2_REG_SR_ADDR(SR_RX_FRONT + 1) //18 bits +#define U2_REG_RX_FE_PHASE_CORRECTION U2_REG_SR_ADDR(SR_RX_FRONT + 2) //18 bits +#define U2_REG_RX_FE_OFFSET_I U2_REG_SR_ADDR(SR_RX_FRONT + 3) //18 bits +#define U2_REG_RX_FE_OFFSET_Q U2_REG_SR_ADDR(SR_RX_FRONT + 4) //18 bits + +///////////////////////////////////////////////// +// TX FE +//////////////////////////////////////////////// +#define U2_REG_TX_FE_DC_OFFSET_I U2_REG_SR_ADDR(SR_TX_FRONT + 0) //24 bits +#define U2_REG_TX_FE_DC_OFFSET_Q U2_REG_SR_ADDR(SR_TX_FRONT + 1) //24 bits +#define U2_REG_TX_FE_MAC_CORRECTION U2_REG_SR_ADDR(SR_TX_FRONT + 2) //18 bits +#define U2_REG_TX_FE_PHASE_CORRECTION U2_REG_SR_ADDR(SR_TX_FRONT + 3) //18 bits +#define U2_REG_TX_FE_MUX U2_REG_SR_ADDR(SR_TX_FRONT + 4) //8 bits (std output = 0x10, reversed = 0x01) + +///////////////////////////////////////////////// // DSP TX Regs //////////////////////////////////////////////// #define U2_REG_DSP_TX_FREQ U2_REG_SR_ADDR(SR_TX_DSP + 0) #define U2_REG_DSP_TX_SCALE_IQ U2_REG_SR_ADDR(SR_TX_DSP + 1) #define U2_REG_DSP_TX_INTERP_RATE U2_REG_SR_ADDR(SR_TX_DSP + 2) -#define U2_REG_DSP_TX_MUX U2_REG_SR_ADDR(SR_TX_DSP + 4) ///////////////////////////////////////////////// // DSP RX Regs @@ -135,9 +152,11 @@ (U2_REG_SR_ADDR(SR_RX_DSP1 + offset))) #define U2_REG_DSP_RX_FREQ(which) U2_REG_DSP_RX_HELPER(which, 0) -#define U2_REG_DSP_RX_SCALE_IQ(which) U2_REG_DSP_RX_HELPER(which, 1) #define U2_REG_DSP_RX_DECIM(which) U2_REG_DSP_RX_HELPER(which, 2) -#define U2_REG_DSP_RX_MUX(which) U2_REG_DSP_RX_HELPER(which, 5) +#define U2_REG_DSP_RX_MUX(which) U2_REG_DSP_RX_HELPER(which, 3) + +#define U2_FLAG_DSP_RX_MUX_SWAP_IQ (1 << 0) +#define U2_FLAG_DSP_RX_MUX_REAL_MODE (1 << 1) //////////////////////////////////////////////// // GPIO diff --git a/host/lib/usrp/usrp_e100/dsp_impl.cpp b/host/lib/usrp/usrp_e100/dsp_impl.cpp deleted file mode 100644 index 93034b5dc..000000000 --- a/host/lib/usrp/usrp_e100/dsp_impl.cpp +++ /dev/null @@ -1,190 +0,0 @@ -// -// Copyright 2010-2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include "usrp_e100_impl.hpp" -#include "usrp_e100_regs.hpp" -#include <uhd/usrp/dsp_utils.hpp> -#include <uhd/usrp/dsp_props.hpp> -#include <boost/math/special_functions/round.hpp> -#include <boost/bind.hpp> - -#define rint boost::math::iround - -using namespace uhd; -using namespace uhd::usrp; - -/*********************************************************************** - * RX DDC Initialization - **********************************************************************/ -void usrp_e100_impl::rx_ddc_init(void){ - _rx_ddc_proxy = wax_obj_proxy::make( - boost::bind(&usrp_e100_impl::rx_ddc_get, this, _1, _2), - boost::bind(&usrp_e100_impl::rx_ddc_set, this, _1, _2) - ); - - //initial config and update - rx_ddc_set(DSP_PROP_FREQ_SHIFT, double(0)); - rx_ddc_set(DSP_PROP_HOST_RATE, double(16e6)); -} - -/*********************************************************************** - * RX DDC Get - **********************************************************************/ -void usrp_e100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ - named_prop_t key = named_prop_t::extract(key_); - - switch(key.as<dsp_prop_t>()){ - case DSP_PROP_NAME: - val = std::string("usrp-e ddc0"); - return; - - case DSP_PROP_OTHERS: - val = prop_names_t(); //empty - return; - - case DSP_PROP_FREQ_SHIFT: - val = _ddc_freq; - return; - - case DSP_PROP_CODEC_RATE: - val = _clock_ctrl->get_fpga_clock_rate(); - return; - - case DSP_PROP_HOST_RATE: - val = _clock_ctrl->get_fpga_clock_rate()/_ddc_decim; - return; - - default: UHD_THROW_PROP_GET_ERROR(); - } -} - -/*********************************************************************** - * RX DDC Set - **********************************************************************/ -void usrp_e100_impl::rx_ddc_set(const wax::obj &key_, const wax::obj &val){ - named_prop_t key = named_prop_t::extract(key_); - - switch(key.as<dsp_prop_t>()){ - - case DSP_PROP_STREAM_CMD: - issue_stream_cmd(val.as<stream_cmd_t>()); - return; - - case DSP_PROP_FREQ_SHIFT:{ - double new_freq = val.as<double>(); - _iface->poke32(UE_REG_DSP_RX_FREQ, - dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) - ); - _ddc_freq = new_freq; //shadow - } - return; - - case DSP_PROP_HOST_RATE:{ - //set the decimation - _ddc_decim = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); - _iface->poke32(UE_REG_DSP_RX_DECIM_RATE, dsp_type1::calc_cic_filter_word(_ddc_decim)); - - //set the scaling - static const boost::int16_t default_rx_scale_iq = 1024; - _iface->poke32(UE_REG_DSP_RX_SCALE_IQ, - dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) - ); - } - this->update_xport_channel_mapping(); //rate changed -> update - return; - - default: UHD_THROW_PROP_SET_ERROR(); - } -} - -/*********************************************************************** - * TX DUC Initialization - **********************************************************************/ -void usrp_e100_impl::tx_duc_init(void){ - _tx_duc_proxy = wax_obj_proxy::make( - boost::bind(&usrp_e100_impl::tx_duc_get, this, _1, _2), - boost::bind(&usrp_e100_impl::tx_duc_set, this, _1, _2) - ); - - //initial config and update - tx_duc_set(DSP_PROP_FREQ_SHIFT, double(0)); - tx_duc_set(DSP_PROP_HOST_RATE, double(16e6)); -} - -/*********************************************************************** - * TX DUC Get - **********************************************************************/ -void usrp_e100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ - named_prop_t key = named_prop_t::extract(key_); - - switch(key.as<dsp_prop_t>()){ - case DSP_PROP_NAME: - val = std::string("usrp-e duc0"); - return; - - case DSP_PROP_OTHERS: - val = prop_names_t(); //empty - return; - - case DSP_PROP_FREQ_SHIFT: - val = _duc_freq; - return; - - case DSP_PROP_CODEC_RATE: - val = _clock_ctrl->get_fpga_clock_rate(); - return; - - case DSP_PROP_HOST_RATE: - val = _clock_ctrl->get_fpga_clock_rate()/_duc_interp; - return; - - default: UHD_THROW_PROP_GET_ERROR(); - } -} - -/*********************************************************************** - * TX DUC Set - **********************************************************************/ -void usrp_e100_impl::tx_duc_set(const wax::obj &key_, const wax::obj &val){ - named_prop_t key = named_prop_t::extract(key_); - - switch(key.as<dsp_prop_t>()){ - - case DSP_PROP_FREQ_SHIFT:{ - double new_freq = val.as<double>(); - _iface->poke32(UE_REG_DSP_TX_FREQ, - dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) - ); - _duc_freq = new_freq; //shadow - } - return; - - case DSP_PROP_HOST_RATE:{ - _duc_interp = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); - - //set the interpolation - _iface->poke32(UE_REG_DSP_TX_INTERP_RATE, dsp_type1::calc_cic_filter_word(_duc_interp)); - - //set the scaling - _iface->poke32(UE_REG_DSP_TX_SCALE_IQ, dsp_type1::calc_iq_scale_word(_duc_interp)); - } - this->update_xport_channel_mapping(); //rate changed -> update - return; - - default: UHD_THROW_PROP_SET_ERROR(); - } -} diff --git a/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp b/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp deleted file mode 100644 index 1bcae64c7..000000000 --- a/host/lib/usrp/usrp_e100/usrp_e100_regs.hpp +++ /dev/null @@ -1,221 +0,0 @@ - - -//////////////////////////////////////////////////////////////// -// -// Memory map for embedded wishbone bus -// -//////////////////////////////////////////////////////////////// - -// All addresses are byte addresses. All accesses are word (16-bit) accesses. -// This means that address bit 0 is usually 0. -// There are 11 bits of address for the control. - -#ifndef INCLUDED_USRP_E100_REGS_HPP -#define INCLUDED_USRP_E100_REGS_HPP - -///////////////////////////////////////////////////// -// Slave pointers - -#define UE_REG_SLAVE(n) ((n)<<7) - -///////////////////////////////////////////////////// -// Slave 0 -- Misc Regs - -#define UE_REG_MISC_BASE UE_REG_SLAVE(0) - -#define UE_REG_MISC_LED UE_REG_MISC_BASE + 0 -#define UE_REG_MISC_SW UE_REG_MISC_BASE + 2 -#define UE_REG_MISC_CGEN_CTRL UE_REG_MISC_BASE + 4 -#define UE_REG_MISC_CGEN_ST UE_REG_MISC_BASE + 6 -#define UE_REG_MISC_TEST UE_REG_MISC_BASE + 8 -#define UE_REG_MISC_RX_LEN UE_REG_MISC_BASE + 10 -#define UE_REG_MISC_TX_LEN UE_REG_MISC_BASE + 12 -#define UE_REG_MISC_XFER_RATE UE_REG_MISC_BASE + 14 -#define UE_REG_MISC_COMPAT UE_REG_MISC_BASE + 16 - -///////////////////////////////////////////////////// -// Slave 1 -- UART -// CLKDIV is 16 bits, others are only 8 - -#define UE_REG_UART_BASE UE_REG_SLAVE(1) - -#define UE_REG_UART_CLKDIV UE_REG_UART_BASE + 0 -#define UE_REG_UART_TXLEVEL UE_REG_UART_BASE + 2 -#define UE_REG_UART_RXLEVEL UE_REG_UART_BASE + 4 -#define UE_REG_UART_TXCHAR UE_REG_UART_BASE + 6 -#define UE_REG_UART_RXCHAR UE_REG_UART_BASE + 8 - -///////////////////////////////////////////////////// -// Slave 2 -- SPI Core -// This should be accessed through the IOCTL -// Users should not touch directly - -#define UE_REG_SPI_BASE UE_REG_SLAVE(2) - -//spi slave constants -#define UE_SPI_SS_AD9522 (1 << 3) -#define UE_SPI_SS_AD9862 (1 << 2) -#define UE_SPI_SS_TX_DB (1 << 1) -#define UE_SPI_SS_RX_DB (1 << 0) - -//////////////////////////////////////////////// -// Slave 3 -- I2C Core -// This should be accessed through the IOCTL -// Users should not touch directly - -#define UE_REG_I2C_BASE UE_REG_SLAVE(3) - - -//////////////////////////////////////////////// -// Slave 4 -- GPIO - -#define UE_REG_GPIO_BASE UE_REG_SLAVE(4) - -#define UE_REG_GPIO_RX_IO UE_REG_GPIO_BASE + 0 -#define UE_REG_GPIO_TX_IO UE_REG_GPIO_BASE + 2 -#define UE_REG_GPIO_RX_DDR UE_REG_GPIO_BASE + 4 -#define UE_REG_GPIO_TX_DDR UE_REG_GPIO_BASE + 6 -#define UE_REG_GPIO_RX_SEL UE_REG_GPIO_BASE + 8 -#define UE_REG_GPIO_TX_SEL UE_REG_GPIO_BASE + 10 -#define UE_REG_GPIO_RX_DBG UE_REG_GPIO_BASE + 12 -#define UE_REG_GPIO_TX_DBG UE_REG_GPIO_BASE + 14 - -//possible bit values for sel when dbg is 0: -#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg -#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic - -//possible bit values for sel when dbg is 1: -#define GPIO_SEL_DEBUG_0 0 // if pin is an output, debug lines from FPGA fabric -#define GPIO_SEL_DEBUG_1 1 // if pin is an output, debug lines from FPGA fabric - -/////////////////////////////////////////////////// -// Slave 6 -- ATR Controller -// 16 regs - -#define UE_REG_ATR_BASE UE_REG_SLAVE(6) - -#define UE_REG_ATR_IDLE_RXSIDE UE_REG_ATR_BASE + 0 -#define UE_REG_ATR_IDLE_TXSIDE UE_REG_ATR_BASE + 2 -#define UE_REG_ATR_INTX_RXSIDE UE_REG_ATR_BASE + 4 -#define UE_REG_ATR_INTX_TXSIDE UE_REG_ATR_BASE + 6 -#define UE_REG_ATR_INRX_RXSIDE UE_REG_ATR_BASE + 8 -#define UE_REG_ATR_INRX_TXSIDE UE_REG_ATR_BASE + 10 -#define UE_REG_ATR_FULL_RXSIDE UE_REG_ATR_BASE + 12 -#define UE_REG_ATR_FULL_TXSIDE UE_REG_ATR_BASE + 14 - -/////////////////////////////////////////////////// -// Slave 7 -- Readback Mux 32 - -#define UE_REG_RB_MUX_32_BASE UE_REG_SLAVE(7) - -#define UE_REG_RB_TIME_NOW_SECS UE_REG_RB_MUX_32_BASE + 0 -#define UE_REG_RB_TIME_NOW_TICKS UE_REG_RB_MUX_32_BASE + 4 -#define UE_REG_RB_TIME_PPS_SECS UE_REG_RB_MUX_32_BASE + 8 -#define UE_REG_RB_TIME_PPS_TICKS UE_REG_RB_MUX_32_BASE + 12 -#define UE_REG_RB_MISC_TEST32 UE_REG_RB_MUX_32_BASE + 16 - -//////////////////////////////////////////////////// -// Slave 8 -- Settings Bus -// -// Output-only, no readback, 64 registers total -// Each register must be written 64 bits at a time -// First the address xxx_xx00 and then xxx_xx10 - -#define UE_REG_SETTINGS_BASE_ADDR(n) (UE_REG_SLAVE(8) + (4*(n))) - -#define UE_REG_SR_MISC_TEST32 UE_REG_SETTINGS_BASE_ADDR(52) - -///////////////////////////////////////////////// -// Magic reset regs -//////////////////////////////////////////////// -#define UE_REG_CLEAR_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(48) + (4*(n))) -#define UE_REG_CLEAR_RX UE_REG_CLEAR_ADDR(0) -#define UE_REG_CLEAR_TX UE_REG_CLEAR_ADDR(1) - -///////////////////////////////////////////////// -// DSP RX Regs -//////////////////////////////////////////////// -#define UE_REG_DSP_RX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(16) + (4*(n))) -#define UE_REG_DSP_RX_FREQ UE_REG_DSP_RX_ADDR(0) -#define UE_REG_DSP_RX_SCALE_IQ UE_REG_DSP_RX_ADDR(1) // {scale_i,scale_q} -#define UE_REG_DSP_RX_DECIM_RATE UE_REG_DSP_RX_ADDR(2) // hb and decim rate -#define UE_REG_DSP_RX_DCOFFSET_I UE_REG_DSP_RX_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic -#define UE_REG_DSP_RX_DCOFFSET_Q UE_REG_DSP_RX_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits -#define UE_REG_DSP_RX_MUX UE_REG_DSP_RX_ADDR(5) - -/////////////////////////////////////////////////// -// VITA RX CTRL regs -/////////////////////////////////////////////////// -#define UE_REG_CTRL_RX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(0) + (4*(n))) -// The following 3 are logically a single command register. -// They are clocked into the underlying fifo when time_ticks is written. -#define UE_REG_CTRL_RX_STREAM_CMD UE_REG_CTRL_RX_ADDR(0) // {now, chain, num_samples(30) -#define UE_REG_CTRL_RX_TIME_SECS UE_REG_CTRL_RX_ADDR(1) -#define UE_REG_CTRL_RX_TIME_TICKS UE_REG_CTRL_RX_ADDR(2) -#define UE_REG_CTRL_RX_CLEAR UE_REG_CTRL_RX_ADDR(3) // write anything to clear -#define UE_REG_CTRL_RX_VRT_HEADER UE_REG_CTRL_RX_ADDR(4) // word 0 of packet. FPGA fills in packet counter -#define UE_REG_CTRL_RX_VRT_STREAM_ID UE_REG_CTRL_RX_ADDR(5) // word 1 of packet. -#define UE_REG_CTRL_RX_VRT_TRAILER UE_REG_CTRL_RX_ADDR(6) -#define UE_REG_CTRL_RX_NSAMPS_PER_PKT UE_REG_CTRL_RX_ADDR(7) -#define UE_REG_CTRL_RX_NCHANNELS UE_REG_CTRL_RX_ADDR(8) // 1 in basic case, up to 4 for vector sources - -///////////////////////////////////////////////// -// DSP TX Regs -//////////////////////////////////////////////// -#define UE_REG_DSP_TX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(32) + (4*(n))) -#define UE_REG_DSP_TX_FREQ UE_REG_DSP_TX_ADDR(0) -#define UE_REG_DSP_TX_SCALE_IQ UE_REG_DSP_TX_ADDR(1) // {scale_i,scale_q} -#define UE_REG_DSP_TX_INTERP_RATE UE_REG_DSP_TX_ADDR(2) -#define UE_REG_DSP_TX_UNUSED UE_REG_DSP_TX_ADDR(3) -#define UE_REG_DSP_TX_MUX UE_REG_DSP_TX_ADDR(4) - -///////////////////////////////////////////////// -// VITA TX CTRL regs -//////////////////////////////////////////////// -#define UE_REG_CTRL_TX_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(24) + (4*(n))) -#define UE_REG_CTRL_TX_NCHANNELS UE_REG_CTRL_TX_ADDR(0) -#define UE_REG_CTRL_TX_CLEAR UE_REG_CTRL_TX_ADDR(1) -#define UE_REG_CTRL_TX_REPORT_SID UE_REG_CTRL_TX_ADDR(2) -#define UE_REG_CTRL_TX_POLICY UE_REG_CTRL_TX_ADDR(3) - -#define UE_FLAG_CTRL_TX_POLICY_WAIT (0x1 << 0) -#define UE_FLAG_CTRL_TX_POLICY_NEXT_PACKET (0x1 << 1) -#define UE_FLAG_CTRL_TX_POLICY_NEXT_BURST (0x1 << 2) - -///////////////////////////////////////////////// -// VITA49 64 bit time (write only) -//////////////////////////////////////////////// - /*! - * \brief Time 64 flags - * - * <pre> - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-----------------------------------------------------------+-+-+ - * | |S|P| - * +-----------------------------------------------------------+-+-+ - * - * P - PPS edge selection (0=negedge, 1=posedge, default=0) - * S - Source (0=sma, 1=mimo, 0=default) - * - * </pre> - */ -#define UE_REG_TIME64_ADDR(n) (UE_REG_SETTINGS_BASE_ADDR(40) + (4*(n))) -#define UE_REG_TIME64_SECS UE_REG_TIME64_ADDR(0) // value to set absolute secs to on next PPS -#define UE_REG_TIME64_TICKS UE_REG_TIME64_ADDR(1) // value to set absolute ticks to on next PPS -#define UE_REG_TIME64_FLAGS UE_REG_TIME64_ADDR(2) // flags - see chart above -#define UE_REG_TIME64_IMM UE_REG_TIME64_ADDR(3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) -#define UE_REG_TIME64_TPS UE_REG_TIME64_ADDR(4) // clock ticks per second (counter rollover) - -//pps flags (see above) -#define UE_FLAG_TIME64_PPS_NEGEDGE (0 << 0) -#define UE_FLAG_TIME64_PPS_POSEDGE (1 << 0) -#define UE_FLAG_TIME64_PPS_SMA (0 << 1) -#define UE_FLAG_TIME64_PPS_MIMO (1 << 1) - -#define UE_FLAG_TIME64_LATCH_NOW 1 -#define UE_FLAG_TIME64_LATCH_NEXT_PPS 0 - -#endif - diff --git a/host/usrp_e_utils/CMakeLists.txt b/host/usrp_e_utils/CMakeLists.txt index e7d6ae4b8..ee3d9da65 100644 --- a/host/usrp_e_utils/CMakeLists.txt +++ b/host/usrp_e_utils/CMakeLists.txt @@ -23,12 +23,10 @@ LIBUHD_REGISTER_COMPONENT("USRP-E Utils" ENABLE_USRP_E_UTILS OFF "LINUX" OFF) IF(ENABLE_USRP_E_UTILS) ENABLE_LANGUAGE(C) INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}) - INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100) - INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/usrp_e100/include) - INCLUDE_DIRECTORIES(${CMAKE_BINARY_DIR}/lib/ic_reg_maps) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/e100) + INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/lib/usrp/e100/include) SET(usrp_e_utils_sources - usrp-e-utility.cpp usrp-e-loopback.c usrp-e-timed.c usrp-e-wb-test.cpp diff --git a/host/usrp_e_utils/clkgen_config.hpp b/host/usrp_e_utils/clkgen_config.hpp deleted file mode 100644 index f39f8bb19..000000000 --- a/host/usrp_e_utils/clkgen_config.hpp +++ /dev/null @@ -1,305 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#ifndef USRP_E_UTILS_CLKGEN_CONFIG_HPP -#define USRP_E_UTILS_CLKGEN_CONFIG_HPP - -#include <iostream> -#include <sstream> -#include <fstream> -#include <string> -#include <cstdlib> - -#include <fcntl.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/ioctl.h> - -#include <linux/spi/spidev.h> - -namespace usrp_e_clkgen_config_utility{ - -// Programming data for clock gen chip -static const unsigned int config_data[] = { - 0x000024, - 0x023201, - 0x000081, - 0x000400, - 0x00104c, - 0x001101, - 0x001200, - 0x001300, - 0x001414, - 0x001500, - 0x001604, - 0x001704, - 0x001807, - 0x001900, - //0x001a00,//for debug - 0x001a32, - 0x001b12, - 0x001c44, - 0x001d00, - 0x001e00, - 0x00f062, - 0x00f162, - 0x00f262, - 0x00f362, - 0x00f462, - 0x00f562, - 0x00f662, - 0x00f762, - 0x00f862, - 0x00f962, - 0x00fa62, - 0x00fb62, - 0x00fc00, - 0x00fd00, - 0x019021, - 0x019100, - 0x019200, - 0x019321, - 0x019400, - 0x019500, - 0x019611, - 0x019700, - 0x019800, - 0x019900, - 0x019a00, - 0x019b00, - 0x01e003, - 0x01e102, - 0x023000, - 0x023201, - 0x0b0201, - 0x0b0300, - 0x001fff, - 0x0a0000, - 0x0a0100, - 0x0a0200, - 0x0a0302, - 0x0a0400, - 0x0a0504, - 0x0a060e, - 0x0a0700, - 0x0a0810, - 0x0a090e, - 0x0a0a00, - 0x0a0bf0, - 0x0a0c0b, - 0x0a0d01, - 0x0a0e90, - 0x0a0f01, - 0x0a1001, - 0x0a11e0, - 0x0a1201, - 0x0a1302, - 0x0a1430, - 0x0a1580, - 0x0a16ff, - 0x023201, - 0x0b0301, - 0x023201, -}; - - -const unsigned int CLKGEN_SELECT = 145; - - -enum gpio_direction {IN, OUT}; - -class gpio { - public: - - gpio(unsigned int gpio_num, gpio_direction pin_direction, bool close_action); - ~gpio(); - - bool get_value(); - void set_value(bool state); - - private: - - unsigned int gpio_num; - - std::stringstream base_path; - std::fstream value_file; - std::fstream direction_file; - bool close_action; // True set to input and release, false do nothing -}; - -class spidev { - public: - - spidev(std::string dev_name); - ~spidev(); - - void send(char *wbuf, char *rbuf, unsigned int nbytes); - - private: - - int fd; - -}; - -gpio::gpio(unsigned int _gpio_num, gpio_direction pin_direction, bool close_action) -:close_action(close_action) -{ - std::fstream export_file; - - gpio_num = _gpio_num; - - export_file.open("/sys/class/gpio/export", std::ios::out); - if (!export_file.is_open()) ///\todo Poor error handling - std::cout << "Failed to open gpio export file." << std::endl; - - export_file << gpio_num << std::endl; - - base_path << "/sys/class/gpio/gpio" << gpio_num << std::flush; - - std::string direction_file_name; - - direction_file_name = base_path.str() + "/direction"; - - direction_file.open(direction_file_name.c_str()); - if (!direction_file.is_open()) - std::cout << "Failed to open direction file." << std::endl; - if (pin_direction == OUT) - direction_file << "out" << std::endl; - else - direction_file << "in" << std::endl; - - std::string value_file_name; - - value_file_name = base_path.str() + "/value"; - - value_file.open(value_file_name.c_str(), std::ios_base::in | std::ios_base::out); - if (!value_file.is_open()) - std::cout << "Failed to open value file." << std::endl; -} - -bool gpio::get_value() -{ - - std::string val; - - std::getline(value_file, val); - value_file.seekg(0); - - if (val == "0") - return false; - else if (val == "1") - return true; - else - std::cout << "Data read from value file|" << val << "|" << std::endl; - - return false; -} - -void gpio::set_value(bool state) -{ - - if (state) - value_file << "1" << std::endl; - else - value_file << "0" << std::endl; -} - -gpio::~gpio() -{ - if (close_action) { - std::fstream unexport_file; - - direction_file << "in" << std::endl; - - unexport_file.open("/sys/class/gpio/unexport", std::ios::out); - if (!unexport_file.is_open()) ///\todo Poor error handling - std::cout << "Failed to open gpio export file." << std::endl; - - unexport_file << gpio_num << std::endl; - - } - -} - -spidev::spidev(std::string fname) -{ - int ret; - int mode = 0; - int speed = 12000; - int bits = 24; - - fd = open(fname.c_str(), O_RDWR); - - ret = ioctl(fd, SPI_IOC_WR_MODE, &mode); - ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed); - ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits); -} - - -spidev::~spidev() -{ - close(fd); -} - -void spidev::send(char *buf, char *rbuf, unsigned int nbytes) -{ - int ret; - - struct spi_ioc_transfer tr; - tr.tx_buf = (unsigned long) buf; - tr.rx_buf = (unsigned long) rbuf; - tr.len = nbytes; - tr.delay_usecs = 0; - tr.speed_hz = 12000; - tr.bits_per_word = 24; - - ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); - -} - -static void send_config_to_clkgen(gpio &chip_select, const unsigned int data[], unsigned int data_size) -{ - spidev spi("/dev/spidev1.0"); - unsigned int rbuf; - - for (unsigned int i = 0; i < data_size; i++) { - - //std::cout << "sending " << std::hex << data[i] << std::endl; - chip_select.set_value(0); - spi.send((char *)&data[i], (char *)&rbuf, 4); - chip_select.set_value(1); - unsigned int addr = (data[i] >> 8) & 0xfff; - if (addr == 0x232 || addr == 0x000){ - std::cout << "." << std::flush; - sleep(1); - } - }; - std::cout << std::endl; -} - -}//namespace usrp_e_clkgen_config_utility - -//int main(int argc, char *argv[]) -static void clock_genconfig_main(void) -{ - using namespace usrp_e_clkgen_config_utility; - gpio clkgen_select(CLKGEN_SELECT, OUT, true); - - send_config_to_clkgen(clkgen_select, config_data, sizeof(config_data)/sizeof(config_data[0])); -} - -#endif /*USRP_E_UTILS_CLKGEN_CONFIG_HPP*/ diff --git a/host/usrp_e_utils/usrp-e-debug-pins.c b/host/usrp_e_utils/usrp-e-debug-pins.c index 94f898b67..570ae63d8 100644 --- a/host/usrp_e_utils/usrp-e-debug-pins.c +++ b/host/usrp_e_utils/usrp-e-debug-pins.c @@ -7,7 +7,7 @@ #include <sys/ioctl.h> #include <linux/usrp_e.h> -#include "usrp_e100_regs.hpp" +#include "e100_regs.hpp" // Usage: usrp_e_gpio <string> @@ -54,24 +54,24 @@ int main(int argc, char *argv[]) if (strcmp(argv[1], "0") == 0) { printf("Selected 0 based on %s\n", argv[1]); - write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); - write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); - write_reg(UE_REG_GPIO_TX_SEL, 0x0); - write_reg(UE_REG_GPIO_RX_SEL, 0x0); - write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); - write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + write_reg(E100_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(E100_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(E100_REG_GPIO_TX_SEL, 0x0); + write_reg(E100_REG_GPIO_RX_SEL, 0x0); + write_reg(E100_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(E100_REG_GPIO_RX_DBG, 0xFFFF); } else if (strcmp(argv[1], "1") == 0) { printf("Selected 1 based on %s\n", argv[1]); - write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); - write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); - write_reg(UE_REG_GPIO_TX_SEL, 0xFFFF); - write_reg(UE_REG_GPIO_RX_SEL, 0xFFFF); - write_reg(UE_REG_GPIO_TX_DBG, 0xFFFF); - write_reg(UE_REG_GPIO_RX_DBG, 0xFFFF); + write_reg(E100_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(E100_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(E100_REG_GPIO_TX_SEL, 0xFFFF); + write_reg(E100_REG_GPIO_RX_SEL, 0xFFFF); + write_reg(E100_REG_GPIO_TX_DBG, 0xFFFF); + write_reg(E100_REG_GPIO_RX_DBG, 0xFFFF); } else { printf("Selected off based on %s\n", argv[1]); - write_reg(UE_REG_GPIO_TX_DDR, 0x0); - write_reg(UE_REG_GPIO_RX_DDR, 0x0); + write_reg(E100_REG_GPIO_TX_DDR, 0x0); + write_reg(E100_REG_GPIO_RX_DDR, 0x0); } return 0; diff --git a/host/usrp_e_utils/usrp-e-gpio.c b/host/usrp_e_utils/usrp-e-gpio.c index 7e4bc4e13..4b788e945 100644 --- a/host/usrp_e_utils/usrp-e-gpio.c +++ b/host/usrp_e_utils/usrp-e-gpio.c @@ -7,7 +7,7 @@ #include <sys/ioctl.h> #include "linux/usrp_e.h" -#include "usrp_e100_regs.hpp" +#include "e100_regs.hpp" // Usage: usrp_e_gpio <string> @@ -46,38 +46,38 @@ int main(int argc, char *argv[]) fp = open("/dev/usrp_e0", O_RDWR); printf("fp = %d\n", fp); - write_reg(UE_REG_GPIO_TX_DDR, 0x0); - write_reg(UE_REG_GPIO_RX_DDR, 0xFFFF); + write_reg(E100_REG_GPIO_TX_DDR, 0x0); + write_reg(E100_REG_GPIO_RX_DDR, 0xFFFF); for (i=0; i < 16; i++) { - write_reg(UE_REG_GPIO_RX_IO, 1 << i); + write_reg(E100_REG_GPIO_RX_IO, 1 << i); sleep(1); if (test) { - data_in = read_reg(UE_REG_GPIO_TX_IO); + data_in = read_reg(E100_REG_GPIO_TX_IO); if (data_in != (1 << i)) printf("Read failed, wrote: %X read: %X\n", \ 1 << i, data_in); } } - write_reg(UE_REG_GPIO_RX_DDR, 0x0); - write_reg(UE_REG_GPIO_TX_DDR, 0xFFFF); + write_reg(E100_REG_GPIO_RX_DDR, 0x0); + write_reg(E100_REG_GPIO_TX_DDR, 0xFFFF); sleep(1); for (i=0; i < 16; i++) { - write_reg(UE_REG_GPIO_TX_IO, 1 << i); + write_reg(E100_REG_GPIO_TX_IO, 1 << i); sleep(1); if (test) { - data_in = read_reg(UE_REG_GPIO_RX_IO); + data_in = read_reg(E100_REG_GPIO_RX_IO); if (data_in != (1 << i)) printf("Read failed, wrote: %X read: %X\n", \ 1 << i, data_in); } } - write_reg(UE_REG_GPIO_RX_DDR, 0x0); - write_reg(UE_REG_GPIO_TX_DDR, 0x0); + write_reg(E100_REG_GPIO_RX_DDR, 0x0); + write_reg(E100_REG_GPIO_TX_DDR, 0x0); return 0; } diff --git a/host/usrp_e_utils/usrp-e-utility.cpp b/host/usrp_e_utils/usrp-e-utility.cpp deleted file mode 100644 index 47a2c0900..000000000 --- a/host/usrp_e_utils/usrp-e-utility.cpp +++ /dev/null @@ -1,72 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - -#include <uhd/utils/safe_main.hpp> -#include <boost/program_options.hpp> -#include <boost/format.hpp> -#include <stdexcept> -#include <iostream> - -#include "fpga_downloader.cpp" -#include "clkgen_config.hpp" - -namespace po = boost::program_options; - -int UHD_SAFE_MAIN(int argc, char *argv[]){ - - //variables to be set by po - std::string fpga_path; - - //setup the program options - po::options_description desc("Allowed options"); - desc.add_options() - ("help", "help message") - ("fpga", po::value<std::string>(&fpga_path), "loads the specified FPGA file") - ("reclk", "runs the clock recovery") - ; - po::variables_map vm; - po::store(po::parse_command_line(argc, argv, desc), vm); - po::notify(vm); - - //print the help message - if (vm.count("help")){ - std::cout << boost::format("UHD USRP-E Utility %s") % desc << std::endl; - return ~0; - } - - bool loaded_fpga_image = false; - if (vm.count("fpga") != 0){ - std::cout << "USRP-E Utility loading the FPGA..." << std::endl << std::endl; - usrp_e100_load_fpga(fpga_path); - loaded_fpga_image = true; - sleep(1); - } - - if (vm.count("reclk") != 0){ - std::cout << "USRP-E Utility running the clock recovery..." << std::flush; - //if an image was not loaded or specified, we load pass-through - if (fpga_path.empty()) throw std::runtime_error( - "Please specify the path to the pass-though FPGA image for your device.\n" - " usrp-e-utility --reclk --fpga=/usr/share/uhd/images/usrp_e1xx_pt_fpga.bin" - ); - clock_genconfig_main(); - } - - std::cout << "Done!" << std::endl; - - return 0; -} diff --git a/host/usrp_e_utils/usrp-e-wb-test.cpp b/host/usrp_e_utils/usrp-e-wb-test.cpp index 3d6a8d101..efd9312c1 100644 --- a/host/usrp_e_utils/usrp-e-wb-test.cpp +++ b/host/usrp_e_utils/usrp-e-wb-test.cpp @@ -24,7 +24,7 @@ #include <fcntl.h> //open, close #include <linux/usrp_e.h> -#include "usrp_e100_regs.hpp" +#include "e100_regs.hpp" static const size_t num_test_iters = 10000000; @@ -91,18 +91,18 @@ int main(int, char *[]){ int random_secs = ::random(); //set a bunch of registers - poke16(UE_REG_MISC_TEST, random_test16); - poke32(UE_REG_SR_MISC_TEST32, random_test32); - poke32(UE_REG_TIME64_TICKS, 0); - poke32(UE_REG_TIME64_IMM, 1); //immediate - poke32(UE_REG_TIME64_SECS, random_secs); + poke16(E100_REG_MISC_TEST, random_test16); + poke32(E100_REG_SR_MISC_TEST32, random_test32); + poke32(E100_REG_TIME64_TICKS, 0); + poke32(E100_REG_TIME64_IMM, 1); //immediate + poke32(E100_REG_TIME64_SECS, random_secs); //read a bunch of registers if ( - (peek16(UE_REG_MISC_TEST) == random_test16) and - (peek32(UE_REG_RB_MISC_TEST32) == random_test32) and - (peek32(UE_REG_RB_TIME_NOW_SECS) == random_secs) and -// (peek32(UE_REG_RB_TIME_NOW_TICKS) < 1000000) and + (peek16(E100_REG_MISC_TEST) == random_test16) and + (peek32(E100_REG_RB_MISC_TEST32) == random_test32) and + (peek32(E100_REG_RB_TIME_NOW_SECS) == random_secs) and +// (peek32(E100_REG_RB_TIME_NOW_TICKS) < 1000000) and true) num_pass++; else num_fail++; } |