diff options
34 files changed, 1162 insertions, 987 deletions
diff --git a/host/.gitignore b/host/.gitignore index dec27fcf7..9b0584c23 100644 --- a/host/.gitignore +++ b/host/.gitignore @@ -1,2 +1,3 @@ /build tags +*~ diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt index cff9206ed..15fd283f7 100644 --- a/host/CMakeLists.txt +++ b/host/CMakeLists.txt @@ -212,8 +212,8 @@ UHD_INSTALL(FILES # Images download directory for utils/uhd_images_downloader.py ######################################################################## -SET(UHD_IMAGES_MD5SUM "a58f871ebd9391b8625ecb640dd71167") -SET(UHD_IMAGES_DOWNLOAD_SRC "http://files.ettus.com/binaries/master_images/archive/uhd-images_003.005.004-145-ge6f21482.zip") +SET(UHD_IMAGES_MD5SUM "50e68637ae6e08b6e2b3557516bc115b") +SET(UHD_IMAGES_DOWNLOAD_SRC "http://files.ettus.com/binaries/maint_images/archive/uhd-images_003.006.000-release.zip") ######################################################################## # Register top level components diff --git a/host/cmake/Modules/UHDVersion.cmake b/host/cmake/Modules/UHDVersion.cmake index 8e14b26bf..c07b18f01 100644 --- a/host/cmake/Modules/UHDVersion.cmake +++ b/host/cmake/Modules/UHDVersion.cmake @@ -26,8 +26,8 @@ FIND_PACKAGE(Git QUIET) # - increment patch on for bug fixes and docs ######################################################################## SET(UHD_VERSION_MAJOR 003) -SET(UHD_VERSION_MINOR 005) -SET(UHD_VERSION_PATCH 004) +SET(UHD_VERSION_MINOR 006) +SET(UHD_VERSION_PATCH 000) ######################################################################## # Set up trimmed version numbers for DLL resource files and packages diff --git a/host/examples/rx_samples_to_file.cpp b/host/examples/rx_samples_to_file.cpp index b0e498125..a28d1d628 100644 --- a/host/examples/rx_samples_to_file.cpp +++ b/host/examples/rx_samples_to_file.cpp @@ -236,8 +236,8 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ ("ref", po::value<std::string>(&ref)->default_value("internal"), "waveform type (internal, external, mimo)") ("wirefmt", po::value<std::string>(&wirefmt)->default_value("sc16"), "wire format (sc8 or sc16)") ("setup", po::value<double>(&setup_time)->default_value(1.0), "seconds of setup time") - ("progress", "show average bandwidth on exit") - ("stats", "periodically display short-term bandwidth") + ("progress", "periodically display short-term bandwidth") + ("stats", "show average bandwidth on exit") ("sizemap", "track packet size and display breakdown on exit") ("null", "run without writing to file") ("continue", "don't abort on a bad packet") diff --git a/host/include/uhd/transport/usb_device_handle.hpp b/host/include/uhd/transport/usb_device_handle.hpp index 2951d7fbb..fdea9e2be 100644 --- a/host/include/uhd/transport/usb_device_handle.hpp +++ b/host/include/uhd/transport/usb_device_handle.hpp @@ -73,6 +73,12 @@ public: virtual boost::uint16_t get_product_id() const = 0; /*! + * Test whether the firmware is loaded on the device. + * \return true if firmware is loaded + */ + virtual bool firmware_loaded() = 0; + + /*! * Return a vector of USB devices on this host * \return a vector of USB device handles that match vid and pid */ diff --git a/host/include/uhd/transport/zero_copy.hpp b/host/include/uhd/transport/zero_copy.hpp index 9b5b25e97..40d7b8c59 100644 --- a/host/include/uhd/transport/zero_copy.hpp +++ b/host/include/uhd/transport/zero_copy.hpp @@ -74,6 +74,7 @@ namespace uhd{ namespace transport{ } boost::detail::atomic_count _ref_count; + typedef boost::intrusive_ptr<managed_buffer> sptr; protected: void *_buffer; diff --git a/host/include/uhd/utils/CMakeLists.txt b/host/include/uhd/utils/CMakeLists.txt index cdef2e946..e86826435 100644 --- a/host/include/uhd/utils/CMakeLists.txt +++ b/host/include/uhd/utils/CMakeLists.txt @@ -27,6 +27,7 @@ UHD_INSTALL(FILES images.hpp log.hpp msg.hpp + msg_task.hpp paths.hpp pimpl.hpp safe_call.hpp diff --git a/host/include/uhd/utils/msg_task.hpp b/host/include/uhd/utils/msg_task.hpp new file mode 100644 index 000000000..ebb29af08 --- /dev/null +++ b/host/include/uhd/utils/msg_task.hpp @@ -0,0 +1,74 @@ +// +// Copyright 2011-2013 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_UHD_UTILS_MSG_TASK_HPP +#define INCLUDED_UHD_UTILS_MSG_TASK_HPP + +#include <uhd/config.hpp> +#include <uhd/transport/zero_copy.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/function.hpp> +#include <boost/utility.hpp> +#include <boost/optional/optional.hpp> +#include <vector> + +namespace uhd{ + class UHD_API msg_task : boost::noncopyable{ + public: + typedef boost::shared_ptr<msg_task> sptr; + typedef std::vector<uint8_t> msg_payload_t; + typedef std::pair<uint32_t, msg_payload_t > msg_type_t; + typedef boost::function<boost::optional<msg_type_t>(void)> task_fcn_type; + + /* + * During shutdown message queues for radio control cores might not be available anymore. + * Such stranded messages get pushed into a dump queue. + * With this function radio_ctrl_core can check if one of the messages meant for it got stranded. + */ + virtual msg_payload_t get_msg_from_dump_queue(boost::uint32_t sid) = 0; + + inline static std::vector<uint8_t> buff_to_vector(uint8_t* p, size_t n) { + if(p and n > 0){ + std::vector<uint8_t> v(n); + memcpy(&v.front(), p, n); + return v; + } + return std::vector<uint8_t>(); + } + + /*! + * Create a new task object with function callback. + * The task function callback will be run in a loop. + * until the thread is interrupted by the deconstructor. + * + * A function may return payload which is then pushed to + * a synchronized message queue. + * + * A task should return in a reasonable amount of time + * or may block forever under the following conditions: + * - The blocking call is interruptible. + * - The task polls the interrupt condition. + * + * \param task_fcn the task callback function + * \return a new task object + */ + static sptr make(const task_fcn_type &task_fcn); + }; +} //namespace uhd + +#endif /* INCLUDED_UHD_UTILS_MSG_TASK_HPP */ + diff --git a/host/include/uhd/utils/tasks.hpp b/host/include/uhd/utils/tasks.hpp index dcb003e39..a1f682a83 100644 --- a/host/include/uhd/utils/tasks.hpp +++ b/host/include/uhd/utils/tasks.hpp @@ -46,7 +46,6 @@ namespace uhd{ static sptr make(const task_fcn_type &task_fcn); }; - } //namespace uhd #endif /* INCLUDED_UHD_UTILS_TASKS_HPP */ diff --git a/host/lib/convert/convert_unpack_sc12.cpp b/host/lib/convert/convert_unpack_sc12.cpp index 6583eb21f..a2aec2ae5 100644 --- a/host/lib/convert/convert_unpack_sc12.cpp +++ b/host/lib/convert/convert_unpack_sc12.cpp @@ -32,6 +32,17 @@ struct item32_sc12_3x item32_t line2; }; +/* + * convert_sc12_item32_3_to_star_4 takes in 3 lines with 32 bit each + * and converts them 4 samples of type 'std::complex<type>'. + * The structure of the 3 lines is as follows: + * _ _ _ _ _ _ _ _ + * |_ _ _1_ _ _|_ _| + * |_2_ _ _|_ _ _3_| + * |_ _|_ _ _4_ _ _| + * + * The numbers mark the position of one complex sample. + */ template <typename type, tohost32_type tohost> void convert_sc12_item32_3_to_star_4 ( @@ -84,17 +95,48 @@ struct convert_sc12_item32_1_to_star_1 : public converter _scalar = scalar/unpack_growth; } + /* + * This converter takes in 24 bits complex samples, 12 bits I and 12 bits Q, and converts them to type 'std::complex<type>'. + * 'type' is usually 'float'. + * For the converter to work correctly the used managed_buffer which holds all samples of one packet has to be 32 bits aligned. + * We assume 32 bits to be one line. This said the converter must be aware where it is supposed to start within 3 lines. + * + */ void operator()(const input_type &inputs, const output_type &outputs, const size_t nsamps) { - const item32_sc12_3x *input = reinterpret_cast<const item32_sc12_3x *>(size_t(inputs[0]) & ~0x3); + /* + * Looking at the line structure above we can identify 4 cases. + * Each corresponds to the start of a different sample within a 3 line block. + * head_samps derives the number of samples left within one block. + * Then the number of bytes the converter has to rewind are calculated. + */ + const size_t head_samps = size_t(inputs[0]) & 0x3; + size_t rewind = 0; + switch(head_samps) + { + case 0: break; + case 1: rewind = 9; break; + case 2: rewind = 6; break; + case 3: rewind = 3; break; + } + + /* + * The pointer *input now points to the head of a 3 line block. + */ + const item32_sc12_3x *input = reinterpret_cast<const item32_sc12_3x *>(size_t(inputs[0]) - rewind); std::complex<type> *output = reinterpret_cast<std::complex<type> *>(outputs[0]); //helper variables std::complex<type> dummy0, dummy1, dummy2; size_t i = 0, o = 0; - //handle the head case - const size_t head_samps = size_t(inputs[0]) & 0x3; + /* + * handle the head case + * head_samps holds the number of samples left in a block. + * The 3 line converter is called for the whole block and already processed samples are dumped. + * We don't run into the risk of a SIGSEGV because input will always point to valid memory within a managed_buffer. + * Furthermore the bytes in a buffer remain unchanged after they have been copied into it. + */ switch (head_samps) { case 0: break; //no head @@ -111,7 +153,18 @@ struct convert_sc12_item32_1_to_star_1 : public converter i++; o += 4; } - //handle the tail case + /* + * handle the tail case + * The converter can be called with any number of samples to be converted. + * This can end up in only a part of a block to be converted in one call. + * We never have to worry about SIGSEGVs here as long as we end in the middle of a managed_buffer. + * If we are at the end of managed_buffer there are 2 precautions to prevent SIGSEGVs. + * Firstly only a read operation is performed. + * Secondly managed_buffers allocate a fixed size memory which is always larger than the actually used size. + * e.g. The current sample maximum is 2000 samples in a packet over USB. + * With sc12 samples a packet consists of 6000kb but managed_buffers allocate 16kb each. + * Thus we don't run into problems here either. + */ const size_t tail_samps = nsamps - o; switch (tail_samps) { diff --git a/host/lib/convert/sse2_fc32_to_sc16.cpp b/host/lib/convert/sse2_fc32_to_sc16.cpp index f5a2b7610..a83e9b46c 100644 --- a/host/lib/convert/sse2_fc32_to_sc16.cpp +++ b/host/lib/convert/sse2_fc32_to_sc16.cpp @@ -27,6 +27,7 @@ DECLARE_CONVERTER(fc32, 1, sc16_item32_le, 1, PRIORITY_SIMD){ const __m128 scalar = _mm_set_ps1(float(scale_factor)); + // this macro converts values faster by using SSE intrinsics to convert 4 values at a time #define convert_fc32_1_to_item32_1_nswap_guts(_al_) \ for (; i+3 < nsamps; i+=4){ \ /* load from input */ \ @@ -48,19 +49,25 @@ DECLARE_CONVERTER(fc32, 1, sc16_item32_le, 1, PRIORITY_SIMD){ size_t i = 0; - //dispatch according to alignment + // need to dispatch according to alignment for fastest conversion switch (size_t(input) & 0xf){ + case 0x0: + // the data is 16-byte aligned, so do the fast processing of the bulk of the samples + convert_fc32_1_to_item32_1_nswap_guts(_) + break; case 0x8: + // the first sample is 8-byte aligned - process it to align the remainder of the samples to 16-bytes xx_to_item32_sc16<uhd::htowx>(input, output, 1, scale_factor); i++; - break; - case 0x0: + // do faster processing of the bulk of the samples now that we are 16-byte aligned convert_fc32_1_to_item32_1_nswap_guts(_) break; - default: convert_fc32_1_to_item32_1_nswap_guts(u_) + default: + // we are not 8 or 16-byte aligned, so do fast processing with the unaligned load + convert_fc32_1_to_item32_1_nswap_guts(u_) } - //convert remainder + // convert any remaining samples xx_to_item32_sc16<uhd::htowx>(input+i, output+i, nsamps-i, scale_factor); } @@ -70,6 +77,7 @@ DECLARE_CONVERTER(fc32, 1, sc16_item32_be, 1, PRIORITY_SIMD){ const __m128 scalar = _mm_set_ps1(float(scale_factor)); + // this macro converts values faster by using SSE intrinsics to convert 4 values at a time #define convert_fc32_1_to_item32_1_bswap_guts(_al_) \ for (; i+3 < nsamps; i+=4){ \ /* load from input */ \ @@ -90,18 +98,24 @@ DECLARE_CONVERTER(fc32, 1, sc16_item32_be, 1, PRIORITY_SIMD){ size_t i = 0; - //dispatch according to alignment + // need to dispatch according to alignment for fastest conversion switch (size_t(input) & 0xf){ + case 0x0: + // the data is 16-byte aligned, so do the fast processing of the bulk of the samples + convert_fc32_1_to_item32_1_bswap_guts(_) case 0x8: + // the first value is 8-byte aligned - process it and prepare the bulk of the data for fast conversion xx_to_item32_sc16<uhd::htonx>(input, output, 1, scale_factor); i++; - break; - case 0x0: + // do faster processing of the remaining samples now that we are 16-byte aligned convert_fc32_1_to_item32_1_bswap_guts(_) break; - default: convert_fc32_1_to_item32_1_bswap_guts(u_) + break; + default: + // we are not 8 or 16-byte aligned, so do fast processing with the unaligned load + convert_fc32_1_to_item32_1_bswap_guts(u_) } - //convert remainder + // convert any remaining samples xx_to_item32_sc16<uhd::htonx>(input+i, output+i, nsamps-i, scale_factor); } diff --git a/host/lib/convert/sse2_sc16_to_fc32.cpp b/host/lib/convert/sse2_sc16_to_fc32.cpp index 7a9860970..0ac7f1798 100644 --- a/host/lib/convert/sse2_sc16_to_fc32.cpp +++ b/host/lib/convert/sse2_sc16_to_fc32.cpp @@ -28,6 +28,7 @@ DECLARE_CONVERTER(sc16_item32_le, 1, fc32, 1, PRIORITY_SIMD){ const __m128 scalar = _mm_set_ps1(float(scale_factor)/(1 << 16)); const __m128i zeroi = _mm_setzero_si128(); + // this macro converts values faster by using SSE intrinsics to convert 4 values at a time #define convert_item32_1_to_fc32_1_nswap_guts(_al_) \ for (; i+3 < nsamps; i+=4){ \ /* load from input */ \ @@ -50,19 +51,25 @@ DECLARE_CONVERTER(sc16_item32_le, 1, fc32, 1, PRIORITY_SIMD){ size_t i = 0; - //dispatch according to alignment + // need to dispatch according to alignment for fastest conversion switch (size_t(output) & 0xf){ + case 0x0: + // the data is 16-byte aligned, so do the fast processing of the bulk of the samples + convert_item32_1_to_fc32_1_nswap_guts(_) + break; case 0x8: + // the first sample is 8-byte aligned - process it to align the remainder of the samples to 16-bytes item32_sc16_to_xx<uhd::htowx>(input, output, 1, scale_factor); i++; - break; - case 0x0: + // do faster processing of the bulk of the samples now that we are 16-byte aligned convert_item32_1_to_fc32_1_nswap_guts(_) break; - default: convert_item32_1_to_fc32_1_nswap_guts(u_) + default: + // we are not 8 or 16-byte aligned, so do fast processing with the unaligned load and store + convert_item32_1_to_fc32_1_nswap_guts(u_) } - //convert remainder + // convert any remaining samples item32_sc16_to_xx<uhd::htowx>(input+i, output+i, nsamps-i, scale_factor); } @@ -73,6 +80,7 @@ DECLARE_CONVERTER(sc16_item32_be, 1, fc32, 1, PRIORITY_SIMD){ const __m128 scalar = _mm_set_ps1(float(scale_factor)/(1 << 16)); const __m128i zeroi = _mm_setzero_si128(); + // this macro converts values faster by using SSE intrinsics to convert 4 values at a time #define convert_item32_1_to_fc32_1_bswap_guts(_al_) \ for (; i+3 < nsamps; i+=4){ \ /* load from input */ \ @@ -94,18 +102,24 @@ DECLARE_CONVERTER(sc16_item32_be, 1, fc32, 1, PRIORITY_SIMD){ size_t i = 0; - //dispatch according to alignment + // need to dispatch according to alignment for fastest conversion switch (size_t(output) & 0xf){ + case 0x0: + // the data is 16-byte aligned, so do the fast processing of the bulk of the samples + convert_item32_1_to_fc32_1_bswap_guts(_) + break; case 0x8: + // the first sample is 8-byte aligned - process it to align the remainder of the samples to 16-bytes item32_sc16_to_xx<uhd::htonx>(input, output, 1, scale_factor); i++; - break; - case 0x0: + // do faster processing of the bulk of the samples now that we are 16-byte aligned convert_item32_1_to_fc32_1_bswap_guts(_) break; - default: convert_item32_1_to_fc32_1_bswap_guts(u_) + default: + // we are not 8 or 16-byte aligned, so do fast processing with the unaligned load and store + convert_item32_1_to_fc32_1_bswap_guts(u_) } - //convert remainder + // convert any remaining samples item32_sc16_to_xx<uhd::htonx>(input+i, output+i, nsamps-i, scale_factor); } diff --git a/host/lib/transport/libusb1_base.cpp b/host/lib/transport/libusb1_base.cpp index 0ef53db0a..8bd0f4354 100644 --- a/host/lib/transport/libusb1_base.cpp +++ b/host/lib/transport/libusb1_base.cpp @@ -19,10 +19,12 @@ #include <uhd/exception.hpp> #include <uhd/utils/msg.hpp> #include <uhd/utils/log.hpp> +#include <uhd/utils/tasks.hpp> #include <uhd/types/dict.hpp> #include <boost/weak_ptr.hpp> #include <boost/thread/mutex.hpp> #include <boost/foreach.hpp> +#include <boost/bind.hpp> #include <cstdlib> #include <iostream> @@ -37,9 +39,11 @@ public: libusb_session_impl(void){ UHD_ASSERT_THROW(libusb_init(&_context) == 0); libusb_set_debug(_context, debug_level); + task_handler = task::make(boost::bind(&libusb_session_impl::libusb_event_handler_task, this, _context)); } ~libusb_session_impl(void){ + task_handler.reset(); libusb_exit(_context); } @@ -49,6 +53,21 @@ public: private: libusb_context *_context; + task::sptr task_handler; + + /* + * Task to handle libusb events. There should only be one thread per libusb_context handling events. + * Using more than one thread can result in excessive CPU usage in kernel space (presumably from locking/waiting). + * The libusb documentation says it is safe, which it is, but it neglects to state the cost in CPU usage. + * Just don't do it! + */ + UHD_INLINE void libusb_event_handler_task(libusb_context *context) + { + timeval tv; + tv.tv_sec = 0; + tv.tv_usec = 100000; + libusb_handle_events_timeout(context, &tv); + } }; libusb::session::sptr libusb::session::get_global_session(void){ @@ -274,6 +293,10 @@ public: return libusb::device_descriptor::make(this->get_device())->get().idProduct; } + bool firmware_loaded() { + return (get_manufacturer() == "Ettus Research LLC"); + } + private: libusb::device::sptr _dev; //always keep a reference to device }; diff --git a/host/lib/transport/libusb1_zero_copy.cpp b/host/lib/transport/libusb1_zero_copy.cpp index 197e257da..2d18e1623 100644 --- a/host/lib/transport/libusb1_zero_copy.cpp +++ b/host/lib/transport/libusb1_zero_copy.cpp @@ -73,6 +73,15 @@ struct lut_result_t int completed; libusb_transfer_status status; int actual_length; + boost::mutex mut; + boost::condition_variable usb_transfer_complete; +}; + +// Created to be used as an argument to boost::condition_variable::timed_wait() function +struct lut_result_completed { + const lut_result_t& _result; + lut_result_completed(const lut_result_t& result):_result(result) {} + bool operator()() const {return (_result.completed ? true : false);} }; /*! @@ -84,48 +93,11 @@ struct lut_result_t static void LIBUSB_CALL libusb_async_cb(libusb_transfer *lut) { lut_result_t *r = (lut_result_t *)lut->user_data; - r->completed = 1; + boost::lock_guard<boost::mutex> lock(r->mut); r->status = lut->status; r->actual_length = lut->actual_length; -} - -/*! - * Wait for a managed buffer to become complete. - * - * This routine processes async events until the transaction completes. - * We must call the libusb handle events in a loop because the handler - * may complete managed buffers other than the one we are waiting on. - * - * We cannot determine if handle events timed out or processed an event. - * Therefore, the timeout condition is handled by using boost system time. - * - * \param ctx the libusb context structure - * \param timeout the wait timeout in seconds - * \param completed a reference to the completed flag - * \return true for completion, false for timeout - */ -UHD_INLINE bool wait_for_completion(libusb_context *ctx, const double timeout, int &completed) -{ - //already completed by a previous call? - if (completed) return true; - - //perform a non-blocking event handle - timeval tv; - tv.tv_sec = 0; - tv.tv_usec = 0; - libusb_handle_events_timeout_completed(ctx, &tv, &completed); - if (completed) return true; - - //finish the rest with a timeout loop - const boost::system_time timeout_time = boost::get_system_time() + boost::posix_time::microseconds(long(timeout*1000000)); - while (not completed and (boost::get_system_time() < timeout_time)){ - timeval tv; - tv.tv_sec = 0; - tv.tv_usec = 10000; /*10ms*/ - libusb_handle_events_timeout_completed(ctx, &tv, &completed); - } - - return completed; + r->completed = 1; + r->usb_transfer_complete.notify_one(); // wake up thread waiting in wait_for_completion() member function below } /*********************************************************************** @@ -154,7 +126,7 @@ public: template <typename buffer_type> UHD_INLINE typename buffer_type::sptr get_new(const double timeout) { - if (wait_for_completion(_ctx, timeout, result.completed)) + if (wait_for_completion(timeout)) { if (result.status != LIBUSB_TRANSFER_COMPLETED) throw uhd::runtime_error(str(boost::format( "usb %s transfer status: %d") % _name % int(result.status))); @@ -164,9 +136,31 @@ public: return typename buffer_type::sptr(); } + // This is public because it is accessed from the libusb_zero_copy_single constructor lut_result_t result; + /*! + * Wait for a managed buffer to become complete. + * + * \param timeout the wait timeout in seconds. A negative value will wait forever. + * \return true for completion, false for timeout + */ + UHD_INLINE bool wait_for_completion(const double timeout) + { + boost::unique_lock<boost::mutex> lock(result.mut); + if (!result.completed) { + if (timeout < 0.0) { + result.usb_transfer_complete.wait(lock); + } else { + const boost::system_time timeout_time = boost::get_system_time() + boost::posix_time::microseconds(long(timeout*1000000)); + result.usb_transfer_complete.timed_wait(lock, timeout_time, lut_result_completed(result)); + } + } + return result.completed; + } + private: + boost::function<void(libusb_zero_copy_mb *)> _release_cb; const bool _is_recv; const std::string _name; @@ -252,8 +246,6 @@ public: ~libusb_zero_copy_single(void) { - libusb_context *ctx = libusb::session::get_global_session()->get_context(); - //cancel all transfers BOOST_FOREACH(libusb_transfer *lut, _all_luts) { @@ -261,8 +253,10 @@ public: } //process all transfers until timeout occurs - int completed = 0; - wait_for_completion(ctx, 0.01, completed); + BOOST_FOREACH(libusb_zero_copy_mb *mb, _enqueued) + { + mb->wait_for_completion(0.01); + } //free all transfers BOOST_FOREACH(libusb_transfer *lut, _all_luts) @@ -276,19 +270,18 @@ public: { typename buffer_type::sptr buff; libusb_zero_copy_mb *front = NULL; + boost::mutex::scoped_lock lock(_mutex); + if (_enqueued.empty()) { - boost::mutex::scoped_lock l(_mutex); - if (_enqueued.empty()) - { - _cond.timed_wait(l, boost::posix_time::microseconds(long(timeout*1e6))); - } - if (_enqueued.empty()) return buff; - front = _enqueued.front(); + _cond.timed_wait(lock, boost::posix_time::microseconds(long(timeout*1e6))); } + if (_enqueued.empty()) return buff; + front = _enqueued.front(); + lock.unlock(); buff = front->get_new<buffer_type>(timeout); + lock.lock(); - boost::mutex::scoped_lock l(_mutex); if (buff) _enqueued.pop_front(); this->submit_what_we_can(); return buff; diff --git a/host/lib/usrp/b100/b100_impl.cpp b/host/lib/usrp/b100/b100_impl.cpp index 19df3d6af..305ba42a7 100644 --- a/host/lib/usrp/b100/b100_impl.cpp +++ b/host/lib/usrp/b100/b100_impl.cpp @@ -310,12 +310,14 @@ b100_impl::b100_impl(const device_addr_t &device_addr){ _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(rx_codec_path / "gains/pga/range").set(b100_codec_ctrl::rx_pga_gain_range); _tree->create<double>(rx_codec_path / "gains/pga/value") - .coerce(boost::bind(&b100_impl::update_rx_codec_gain, this, _1)); + .coerce(boost::bind(&b100_impl::update_rx_codec_gain, this, _1)) + .set(0.0); _tree->create<std::string>(tx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(tx_codec_path / "gains/pga/range").set(b100_codec_ctrl::tx_pga_gain_range); _tree->create<double>(tx_codec_path / "gains/pga/value") .subscribe(boost::bind(&b100_codec_ctrl::set_tx_pga_gain, _codec_ctrl, _1)) - .publish(boost::bind(&b100_codec_ctrl::get_tx_pga_gain, _codec_ctrl)); + .publish(boost::bind(&b100_codec_ctrl::get_tx_pga_gain, _codec_ctrl)) + .set(0.0); //////////////////////////////////////////////////////////////////// // and do the misc mboard sensors diff --git a/host/lib/usrp/b200/b200_iface.cpp b/host/lib/usrp/b200/b200_iface.cpp index bff075536..a2e23cf1b 100644 --- a/host/lib/usrp/b200/b200_iface.cpp +++ b/host/lib/usrp/b200/b200_iface.cpp @@ -70,6 +70,11 @@ const static boost::uint8_t FX3_STATE_RUNNING = 0x04; const static boost::uint8_t FX3_STATE_UNCONFIGURED = 0x05; const static boost::uint8_t FX3_STATE_ERROR = 0x06; +const static int VREQ_MAX_SIZE_USB2 = 64; +const static int VREQ_MAX_SIZE_USB3 = 512; +const static int VREQ_DEFAULT_SIZE = VREQ_MAX_SIZE_USB2; +const static int VREQ_MAX_SIZE = VREQ_MAX_SIZE_USB3; + typedef boost::uint32_t hash_type; @@ -244,10 +249,12 @@ public: size_t num_bytes ){ byte_vector_t recv_bytes(num_bytes); - fx3_control_read(B200_VREQ_EEPROM_READ, + int bytes_read = fx3_control_read(B200_VREQ_EEPROM_READ, 0, offset | (boost::uint16_t(addr) << 8), (unsigned char*) &recv_bytes[0], num_bytes); + if (bytes_read != num_bytes) + throw uhd::io_error("Failed to read data from EEPROM."); return recv_bytes; } @@ -493,10 +500,24 @@ public: hash_type hash = generate_hash(filename); hash_type loaded_hash; usrp_get_fpga_hash(loaded_hash); if (hash == loaded_hash) return 0; - - unsigned char out_buff[64]; - memset(out_buff, 0x00, sizeof(out_buff)); - fx3_control_write(B200_VREQ_FPGA_CONFIG, 0, 0, out_buff, 1, 1000); + + // Establish default largest possible control request transfer size based on operating USB speed + int transfer_size = VREQ_DEFAULT_SIZE; + int current_usb_speed = get_usb_speed(); + if (current_usb_speed == 3) + transfer_size = VREQ_MAX_SIZE_USB3; + else if (current_usb_speed != 2) + throw uhd::io_error("load_fpga: get_usb_speed returned invalid USB speed (not 2 or 3)."); + + UHD_ASSERT_THROW(transfer_size <= VREQ_MAX_SIZE); + + unsigned char out_buff[VREQ_MAX_SIZE]; + + // Request loopback read, which will indicate the firmware's current control request buffer size + int nread = fx3_control_read(B200_VREQ_LOOP, 0, 0, out_buff, sizeof(out_buff), 1000); + if (nread <= 0) + throw uhd::io_error("load_fpga: unable to complete firmware loopback request."); + transfer_size = std::min(transfer_size, nread); // Select the smaller value size_t file_size = 0; { @@ -511,6 +532,9 @@ public: throw uhd::io_error("load_fpga: cannot open FPGA input file."); } + memset(out_buff, 0x00, sizeof(out_buff)); + fx3_control_write(B200_VREQ_FPGA_CONFIG, 0, 0, out_buff, 1, 1000); + wait_count = 0; do { fx3_state = get_fx3_status(); @@ -544,14 +568,18 @@ public: size_t bytes_sent = 0; while(!file.eof()) { - file.read((char *) out_buff, sizeof(out_buff)); + file.read((char *) out_buff, transfer_size); const std::streamsize n = file.gcount(); if(n == 0) continue; boost::uint16_t transfer_count = boost::uint16_t(n); /* Send the data to the device. */ - fx3_control_write(B200_VREQ_FPGA_DATA, 0, 0, out_buff, transfer_count, 5000); + int nwritten = fx3_control_write(B200_VREQ_FPGA_DATA, 0, 0, out_buff, transfer_count, 5000); + if (nwritten <= 0) + throw uhd::io_error("load_fpga: cannot write bitstream to FX3."); + else if (nwritten != transfer_count) + throw uhd::io_error("load_fpga: short write while transferring bitstream to FX3."); if (load_img_msg) { diff --git a/host/lib/usrp/b200/b200_iface.hpp b/host/lib/usrp/b200/b200_iface.hpp index 1247d1f86..5b6eeede4 100644 --- a/host/lib/usrp/b200/b200_iface.hpp +++ b/host/lib/usrp/b200/b200_iface.hpp @@ -25,7 +25,17 @@ #include <boost/utility.hpp> #include "ad9361_ctrl.hpp" -class b200_iface: boost::noncopyable, public virtual uhd::i2c_iface, +const static boost::uint16_t B200_VENDOR_ID = 0x2500; +const static boost::uint16_t B200_PRODUCT_ID = 0x0020; +const static boost::uint16_t FX3_VID = 0x04b4; +const static boost::uint16_t FX3_DEFAULT_PID = 0x00f3; +const static boost::uint16_t FX3_REENUM_PID = 0x00f0; + +static const std::string B200_FW_FILE_NAME = "usrp_b200_fw.hex"; +static const std::string B200_FPGA_FILE_NAME = "usrp_b200_fpga.bin"; +static const std::string B210_FPGA_FILE_NAME = "usrp_b210_fpga.bin"; + +class UHD_API b200_iface: boost::noncopyable, public virtual uhd::i2c_iface, public ad9361_ctrl_iface_type { public: typedef boost::shared_ptr<b200_iface> sptr; @@ -64,6 +74,10 @@ public: //! send SPI through the FX3 virtual void transact_spi( unsigned char *tx_data, size_t num_tx_bits, \ unsigned char *rx_data, size_t num_rx_bits) = 0; + + virtual void write_eeprom(boost::uint16_t addr, boost::uint16_t offset, const uhd::byte_vector_t &bytes) = 0; + + virtual uhd::byte_vector_t read_eeprom(boost::uint16_t addr, boost::uint16_t offset, size_t num_bytes) = 0; }; diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp index 0da388b93..132b1198d 100644 --- a/host/lib/usrp/b200/b200_impl.cpp +++ b/host/lib/usrp/b200/b200_impl.cpp @@ -37,10 +37,6 @@ using namespace uhd; using namespace uhd::usrp; using namespace uhd::transport; -const boost::uint16_t B200_VENDOR_ID = 0x2500; -const boost::uint16_t B200_PRODUCT_ID = 0x0020; -const boost::uint16_t INIT_PRODUCT_ID = 0x00f0; - static const boost::posix_time::milliseconds REENUMERATION_TIMEOUT_MS(3000); //! mapping of frontend to radio perif index @@ -99,7 +95,7 @@ static device_addrs_t b200_find(const device_addr_t &hint) catch(const uhd::exception &){continue;} //ignore claimed //check if fw was already loaded - if (handle->get_manufacturer() != "Ettus Research LLC") + if (!(handle->firmware_loaded())) { b200_iface::make(control)->load_firmware(b200_fw_image); } @@ -160,8 +156,15 @@ b200_impl::b200_impl(const device_addr_t &device_addr) const fs_path mb_path = "/mboards/0"; //try to match the given device address with something on the USB bus + uint16_t vid = B200_VENDOR_ID; + uint16_t pid = B200_PRODUCT_ID; + if (device_addr.has_key("vid")) + sscanf(device_addr.get("vid").c_str(), "%x", &vid); + if (device_addr.has_key("pid")) + sscanf(device_addr.get("pid").c_str(), "%x", &pid); + std::vector<usb_device_handle::sptr> device_list = - usb_device_handle::get_device_list(B200_VENDOR_ID, B200_PRODUCT_ID); + usb_device_handle::get_device_list(vid, pid); //locate the matching handle in the device list usb_device_handle::sptr handle; @@ -252,7 +255,7 @@ b200_impl::b200_impl(const device_addr_t &device_addr) //////////////////////////////////////////////////////////////////// _async_task_data.reset(new AsyncTaskData()); _async_task_data->async_md.reset(new async_md_type(1000/*messages deep*/)); - _async_task = uhd::task::make(boost::bind(&b200_impl::handle_async_task, this, _ctrl_transport, _async_task_data)); + _async_task = uhd::msg_task::make(boost::bind(&b200_impl::handle_async_task, this, _ctrl_transport, _async_task_data)); //////////////////////////////////////////////////////////////////// // Local control endpoint @@ -474,7 +477,7 @@ b200_impl::b200_impl(const device_addr_t &device_addr) b200_impl::~b200_impl(void) { - UHD_SAFE_CALL + UHD_SAFE_CALL ( _async_task.reset(); ) @@ -612,7 +615,7 @@ void b200_impl::setup_radio(const size_t dspno) /*********************************************************************** * loopback tests **********************************************************************/ - + void b200_impl::register_loopback_self_test(wb_iface::sptr iface) { bool test_fail = false; diff --git a/host/lib/usrp/b200/b200_impl.hpp b/host/lib/usrp/b200/b200_impl.hpp index eced4a539..362c45347 100644 --- a/host/lib/usrp/b200/b200_impl.hpp +++ b/host/lib/usrp/b200/b200_impl.hpp @@ -44,10 +44,6 @@ #include <uhd/transport/bounded_buffer.hpp> #include <boost/weak_ptr.hpp> #include "recv_packet_demuxer_3000.hpp" - -static const std::string B200_FW_FILE_NAME = "usrp_b200_fw.hex"; -static const std::string B200_FPGA_FILE_NAME = "usrp_b200_fpga.bin"; -static const std::string B210_FPGA_FILE_NAME = "usrp_b210_fpga.bin"; static const boost::uint8_t B200_FW_COMPAT_NUM_MAJOR = 0x03; static const boost::uint8_t B200_FW_COMPAT_NUM_MINOR = 0x00; static const boost::uint16_t B200_FPGA_COMPAT_NUM = 0x02; @@ -120,7 +116,7 @@ struct b200_impl : public uhd::device boost::weak_ptr<uhd::tx_streamer> _tx_streamer; //async ctrl + msgs - uhd::task::sptr _async_task; + uhd::msg_task::sptr _async_task; typedef uhd::transport::bounded_buffer<uhd::async_metadata_t> async_md_type; struct AsyncTaskData { @@ -130,7 +126,7 @@ struct b200_impl : public uhd::device b200_uart::sptr gpsdo_uart; }; boost::shared_ptr<AsyncTaskData> _async_task_data; - void handle_async_task(uhd::transport::zero_copy_if::sptr, boost::shared_ptr<AsyncTaskData>); + boost::optional<uhd::msg_task::msg_type_t> handle_async_task(uhd::transport::zero_copy_if::sptr, boost::shared_ptr<AsyncTaskData>); void register_loopback_self_test(uhd::wb_iface::sptr iface); void codec_loopback_self_test(uhd::wb_iface::sptr iface); diff --git a/host/lib/usrp/b200/b200_io_impl.cpp b/host/lib/usrp/b200/b200_io_impl.cpp index d643ef855..4fe90bd4a 100644 --- a/host/lib/usrp/b200/b200_io_impl.cpp +++ b/host/lib/usrp/b200/b200_io_impl.cpp @@ -139,27 +139,44 @@ bool b200_impl::recv_async_msg( return _async_task_data->async_md->pop_with_timed_wait(async_metadata, timeout); } -void b200_impl::handle_async_task( +/* + * This method is constantly called in a msg_task loop. + * Incoming messages are dispatched in to the hosts radio_ctrl_cores. + * The radio_ctrl_core queues are accessed via a weak_ptr to them, stored in AsyncTaskData. + * During shutdown the radio_ctrl_core dtor's are called. + * An empty peek32(0) is sent out to flush pending async messages. + * The response to those messages can't be delivered to the ctrl_core queues anymore + * because the shared pointer corresponding to the weak_ptrs is no longer valid. + * Those stranded messages are put into a dump_queue implemented in msg_task. + * A radio_ctrl_core can search for missing messages there. + */ +boost::optional<uhd::msg_task::msg_type_t> b200_impl::handle_async_task( uhd::transport::zero_copy_if::sptr xport, boost::shared_ptr<AsyncTaskData> data ) { managed_recv_buffer::sptr buff = xport->get_recv_buff(); - if (not buff or buff->size() < 8) return; + if (not buff or buff->size() < 8) + return NULL; + const boost::uint32_t sid = uhd::wtohx(buff->cast<const boost::uint32_t *>()[1]); - switch (sid) - { + switch (sid) { //if the packet is a control response case B200_RESP0_MSG_SID: case B200_RESP1_MSG_SID: case B200_LOCAL_RESP_SID: { - radio_ctrl_core_3000::sptr ctrl; + radio_ctrl_core_3000::sptr ctrl; if (sid == B200_RESP0_MSG_SID) ctrl = data->radio_ctrl[0].lock(); if (sid == B200_RESP1_MSG_SID) ctrl = data->radio_ctrl[1].lock(); if (sid == B200_LOCAL_RESP_SID) ctrl = data->local_ctrl.lock(); - if (ctrl) ctrl->push_response(buff->cast<const boost::uint32_t *>()); + if (ctrl){ + ctrl->push_response(buff->cast<const boost::uint32_t *>()); + } + else{ + return std::make_pair(sid, uhd::msg_task::buff_to_vector(buff->cast<boost::uint8_t *>(), buff->size() ) ); + } break; } @@ -204,6 +221,7 @@ void b200_impl::handle_async_task( default: UHD_MSG(error) << "Got a ctrl packet with unknown SID " << sid << std::endl; } + return NULL; } /*********************************************************************** @@ -231,7 +249,7 @@ rx_streamer::sptr b200_impl::get_rx_stream(const uhd::stream_args_t &args_) //calculate packet size static const size_t hdr_size = 0 + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) - + sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer + //+ sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer - sizeof(vrt::if_packet_info_t().cid) //no class id ever used - sizeof(vrt::if_packet_info_t().tsi) //no int time ever used ; diff --git a/host/lib/usrp/cores/radio_ctrl_core_3000.cpp b/host/lib/usrp/cores/radio_ctrl_core_3000.cpp index 5298fd213..0d6e1c665 100644 --- a/host/lib/usrp/cores/radio_ctrl_core_3000.cpp +++ b/host/lib/usrp/cores/radio_ctrl_core_3000.cpp @@ -35,35 +35,27 @@ using namespace uhd::transport; static const double ACK_TIMEOUT = 2.0; //supposed to be worst case practical timeout static const double MASSIVE_TIMEOUT = 10.0; //for when we wait on a timed command -static const size_t SR_READBACK = 32; +static const size_t SR_READBACK = 32; -class radio_ctrl_core_3000_impl : public radio_ctrl_core_3000 +class radio_ctrl_core_3000_impl: public radio_ctrl_core_3000 { public: - radio_ctrl_core_3000_impl( - const bool big_endian, - uhd::transport::zero_copy_if::sptr ctrl_xport, - uhd::transport::zero_copy_if::sptr resp_xport, - const boost::uint32_t sid, - const std::string &name - ): - _link_type(vrt::if_packet_info_t::LINK_TYPE_CHDR), - _packet_type(vrt::if_packet_info_t::PACKET_TYPE_CONTEXT), - _bige(big_endian), - _ctrl_xport(ctrl_xport), - _resp_xport(resp_xport), - _sid(sid), - _name(name), - _seq_out(0), - _timeout(ACK_TIMEOUT), - _resp_queue(128/*max response msgs*/), - _resp_queue_size(_resp_xport? _resp_xport->get_num_recv_frames() : 3) + radio_ctrl_core_3000_impl(const bool big_endian, + uhd::transport::zero_copy_if::sptr ctrl_xport, + uhd::transport::zero_copy_if::sptr resp_xport, + const boost::uint32_t sid, const std::string &name) : + _link_type(vrt::if_packet_info_t::LINK_TYPE_CHDR), _packet_type( + vrt::if_packet_info_t::PACKET_TYPE_CONTEXT), _bige( + big_endian), _ctrl_xport(ctrl_xport), _resp_xport( + resp_xport), _sid(sid), _name(name), _seq_out(0), _timeout( + ACK_TIMEOUT), _resp_queue(128/*max response msgs*/), _resp_queue_size( + _resp_xport ? _resp_xport->get_num_recv_frames() : 3) { - UHD_LOG << "radio_ctrl_core_3000_impl() " << _name << std::endl; + UHD_LOG<< "radio_ctrl_core_3000_impl() " << _name << std::endl; if (resp_xport) { - while (resp_xport->get_recv_buff(0.0)){} //flush + while (resp_xport->get_recv_buff(0.0)) {} //flush } this->set_time(uhd::time_spec_t(0.0)); this->set_tick_rate(1.0); //something possible but bogus @@ -74,8 +66,8 @@ public: UHD_LOG << "~radio_ctrl_core_3000_impl() " << _name << std::endl; _timeout = ACK_TIMEOUT; //reset timeout to something small UHD_SAFE_CALL( - this->peek32(0); //dummy peek with the purpose of ack'ing all packets - _async_task.reset(); //now its ok to release the task + this->peek32(0);//dummy peek with the purpose of ack'ing all packets + _async_task.reset();//now its ok to release the task ) } @@ -95,7 +87,6 @@ public: { boost::mutex::scoped_lock lock(_mutex); UHD_LOGV(always) << _name << std::hex << " addr 0x" << addr << std::dec << std::endl; - this->send_pkt(SR_READBACK, addr/8); this->wait_for_ack(false); @@ -136,6 +127,11 @@ public: } private: + // This is the buffer type for messages in radio control core. + struct resp_buff_type + { + boost::uint32_t data[8]; + }; /******************************************************************* * Primary control and interaction private methods @@ -143,7 +139,7 @@ private: UHD_INLINE void send_pkt(const boost::uint32_t addr, const boost::uint32_t data = 0) { managed_send_buffer::sptr buff = _ctrl_xport->get_send_buff(0.0); - if (not buff){ + if (not buff) { throw uhd::runtime_error("fifo ctrl timed out getting a send buffer"); } boost::uint32_t *pkt = buff->cast<boost::uint32_t *>(); @@ -173,12 +169,11 @@ private: pkt[packet_info.num_header_words32+0] = (_bige)? uhd::htonx(addr) : uhd::htowx(addr); pkt[packet_info.num_header_words32+1] = (_bige)? uhd::htonx(data) : uhd::htowx(data); //UHD_MSG(status) << boost::format("0x%08x, 0x%08x\n") % addr % data; - //send the buffer over the interface _outstanding_seqs.push(_seq_out); buff->commit(sizeof(boost::uint32_t)*(packet_info.num_packet_words32)); - _seq_out++; //inc seq for next call + _seq_out++;//inc seq for next call } UHD_INLINE boost::uint64_t wait_for_ack(const bool readback) @@ -186,7 +181,6 @@ private: while (readback or (_outstanding_seqs.size() >= _resp_queue_size)) { UHD_LOGV(always) << _name << " wait_for_ack: " << "readback = " << readback << " outstanding_seqs.size() " << _outstanding_seqs.size() << std::endl; - //get seq to ack from outstanding packets list UHD_ASSERT_THROW(not _outstanding_seqs.empty()); const size_t seq_to_ack = _outstanding_seqs.front(); @@ -218,7 +212,27 @@ private: //get buffer from response endpoint - or die in timeout else { - UHD_ASSERT_THROW(_resp_queue.pop_with_timed_wait(resp_buff, _timeout)); + /* + * Couldn't get message with haste. + * Now check both possible queues for messages. + * Messages should come in on _resp_queue, + * but could end up in dump_queue. + * If we don't get a message --> Die in timeout. + */ + double accum_timeout = 0.0; + const double short_timeout = 0.005; // == 5ms + while(not (_resp_queue.pop_with_haste(resp_buff) + || check_dump_queue(resp_buff) + || _resp_queue.pop_with_timed_wait(resp_buff, short_timeout) + )){ + /* + * If a message couldn't be received within a given timeout + * --> throw AssertionError! + */ + accum_timeout += short_timeout; + UHD_ASSERT_THROW(accum_timeout < _timeout); + } + pkt = resp_buff.data; packet_info.num_packet_words32 = sizeof(resp_buff)/sizeof(boost::uint32_t); } @@ -262,9 +276,33 @@ private: return ((hi << 32) | lo); } } + return 0; } + /* + * If ctrl_core waits for a message that didn't arrive it can search for it in the dump queue. + * This actually happens during shutdown. + * handle_async_task can't access radio_ctrl_cores queue anymore thus it returns the corresponding message. + * msg_task class implements a dump_queue to store such messages. + * With check_dump_queue we can check if a message we are waiting for got stranded there. + * If a message got stuck we get it here and push it onto our own message_queue. + */ + bool check_dump_queue(resp_buff_type b) { + boost::uint32_t recv_sid = (((_sid)<<16)|((_sid)>>16)); + uhd::msg_task::msg_payload_t msg; + do{ + msg = _async_task->get_msg_from_dump_queue(recv_sid); + } + while(msg.size() < 8 && msg.size() != 0); + + if(msg.size() >= 8) { + memcpy(b.data, &msg.front(), 8); + return true; + } + return false; + } + void push_response(const boost::uint32_t *buff) { resp_buff_type resp_buff; @@ -272,7 +310,7 @@ private: _resp_queue.push_with_haste(resp_buff); } - void hold_task(boost::shared_ptr<void> task) + void hold_task(uhd::msg_task::sptr task) { _async_task = task; } @@ -282,7 +320,7 @@ private: const bool _bige; const uhd::transport::zero_copy_if::sptr _ctrl_xport; const uhd::transport::zero_copy_if::sptr _resp_xport; - boost::shared_ptr<void> _async_task; + uhd::msg_task::sptr _async_task; const boost::uint32_t _sid; const std::string _name; boost::mutex _mutex; @@ -292,22 +330,15 @@ private: double _tick_rate; double _timeout; std::queue<size_t> _outstanding_seqs; - struct resp_buff_type - { - boost::uint32_t data[8]; - }; bounded_buffer<resp_buff_type> _resp_queue; const size_t _resp_queue_size; }; - -radio_ctrl_core_3000::sptr radio_ctrl_core_3000::make( - const bool big_endian, - zero_copy_if::sptr ctrl_xport, - zero_copy_if::sptr resp_xport, - const boost::uint32_t sid, - const std::string &name -) +radio_ctrl_core_3000::sptr radio_ctrl_core_3000::make(const bool big_endian, + zero_copy_if::sptr ctrl_xport, zero_copy_if::sptr resp_xport, + const boost::uint32_t sid, const std::string &name) { - return sptr(new radio_ctrl_core_3000_impl(big_endian, ctrl_xport, resp_xport, sid, name)); + return sptr( + new radio_ctrl_core_3000_impl(big_endian, ctrl_xport, resp_xport, + sid, name)); } diff --git a/host/lib/usrp/cores/radio_ctrl_core_3000.hpp b/host/lib/usrp/cores/radio_ctrl_core_3000.hpp index a49ca2a4b..51a307c10 100644 --- a/host/lib/usrp/cores/radio_ctrl_core_3000.hpp +++ b/host/lib/usrp/cores/radio_ctrl_core_3000.hpp @@ -18,11 +18,12 @@ #ifndef INCLUDED_LIBUHD_USRP_RADIO_CTRL_3000_HPP #define INCLUDED_LIBUHD_USRP_RADIO_CTRL_3000_HPP +#include <uhd/utils/msg_task.hpp> #include <uhd/types/time_spec.hpp> #include <uhd/transport/zero_copy.hpp> +#include <uhd/types/wb_iface.hpp> #include <boost/shared_ptr.hpp> #include <boost/utility.hpp> -#include <uhd/types/wb_iface.hpp> #include <string> /*! @@ -43,7 +44,7 @@ public: ); //! Hold a ref to a task thats feeding push response - virtual void hold_task(boost::shared_ptr<void> task) = 0; + virtual void hold_task(uhd::msg_task::sptr task) = 0; //! Push a response externall (resp_xport is NULL) virtual void push_response(const boost::uint32_t *buff) = 0; diff --git a/host/lib/usrp/dboard/db_dbsrx2.cpp b/host/lib/usrp/dboard/db_dbsrx2.cpp index 013f3178a..8a8f61a69 100644 --- a/host/lib/usrp/dboard/db_dbsrx2.cpp +++ b/host/lib/usrp/dboard/db_dbsrx2.cpp @@ -358,12 +358,12 @@ double dbsrx2::set_gain(double gain, const std::string &name){ * Bandwidth Handling **********************************************************************/ double dbsrx2::set_bandwidth(double bandwidth){ - //convert complex bandpass to lowpass bandwidth - bandwidth = bandwidth/2.0; - //clip the input bandwidth = dbsrx2_bandwidth_range.clip(bandwidth); + //convert complex bandpass to lowpass bandwidth + bandwidth = bandwidth/2.0; + _max2112_write_regs.lp = int((bandwidth/1e6 - 4)/0.29 + 12); _bandwidth = double(4 + (_max2112_write_regs.lp - 12) * 0.29)*1e6; diff --git a/host/lib/usrp/dboard/db_sbx_common.cpp b/host/lib/usrp/dboard/db_sbx_common.cpp index 9db29e65a..5b713c6d7 100644 --- a/host/lib/usrp/dboard/db_sbx_common.cpp +++ b/host/lib/usrp/dboard/db_sbx_common.cpp @@ -21,6 +21,137 @@ using namespace uhd; using namespace uhd::usrp; using namespace boost::assign; +/*********************************************************************** + * ADF 4350/4351 Tuning Utility + **********************************************************************/ +sbx_xcvr::sbx_versionx::adf435x_tuning_settings sbx_xcvr::sbx_versionx::_tune_adf435x_synth( + double target_freq, + double ref_freq, + const adf435x_tuning_constraints& constraints, + double& actual_freq) +{ + //Default invalid value for actual_freq + actual_freq = 0; + + double pfd_freq = 0; + boost::uint16_t R = 0, BS = 0, N = 0, FRAC = 0, MOD = 0; + boost::uint16_t RFdiv = static_cast<boost::uint16_t>(constraints.rf_divider_range.start()); + bool D = false, T = false; + + //Reference doubler for 50% duty cycle + //If ref_freq < 12.5MHz enable the reference doubler + D = (ref_freq <= constraints.ref_doubler_threshold); + + static const double MIN_VCO_FREQ = 2.2e9; + static const double MAX_VCO_FREQ = 4.4e9; + + //increase RF divider until acceptable VCO frequency + double vco_freq = target_freq; + while (vco_freq < MIN_VCO_FREQ && RFdiv < static_cast<boost::uint16_t>(constraints.rf_divider_range.stop())) { + vco_freq *= 2; + RFdiv *= 2; + } + + /* + * The goal here is to loop though possible R dividers, + * band select clock dividers, N (int) dividers, and FRAC + * (frac) dividers. + * + * Calculate the N and F dividers for each set of values. + * The loop exits when it meets all of the constraints. + * The resulting loop values are loaded into the registers. + * + * from pg.21 + * + * f_pfd = f_ref*(1+D)/(R*(1+T)) + * f_vco = (N + (FRAC/MOD))*f_pfd + * N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD + * f_rf = f_vco/RFdiv) + * f_actual = f_rf/2 + */ + for(R = 1; R <= 1023; R+=1){ + //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T) + pfd_freq = ref_freq*(D?2:1)/(R*(T?2:1)); + + //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth) + if (pfd_freq > constraints.pfd_freq_max) continue; + + //ignore fractional part of tuning + //N is computed from target_freq and not vco_freq because the feedback + //mode is set to FEEDBACK_SELECT_DIVIDED + N = boost::uint16_t(std::floor(target_freq/pfd_freq)); + + //keep N > minimum int divider requirement + if (N < static_cast<boost::uint16_t>(constraints.int_range.start())) continue; + + for(BS=1; BS <= 255; BS+=1){ + //keep the band select frequency at or below band_sel_freq_max + //constraint on band select clock + if (pfd_freq/BS > constraints.band_sel_freq_max) continue; + goto done_loop; + } + } done_loop: + + //Fractional-N calculation + MOD = 4095; //max fractional accuracy + //N is computed from target_freq and not vco_freq because the feedback + //mode is set to FEEDBACK_SELECT_DIVIDED + FRAC = static_cast<boost::uint16_t>((target_freq/pfd_freq - N)*MOD); + if (constraints.force_frac0) { + if (FRAC > (MOD / 2)) { //Round integer such that actual freq is closest to target + N++; + } + FRAC = 0; + } + + //Reference divide-by-2 for 50% duty cycle + // if R even, move one divide by 2 to to regs.reference_divide_by_2 + if(R % 2 == 0) { + T = true; + R /= 2; + } + + //Typical phase resync time documented in data sheet pg.24 + static const double PHASE_RESYNC_TIME = 400e-6; + + //actual frequency calculation + actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(D?2:1)/(R*(T?2:1))); + + //load the settings + adf435x_tuning_settings settings; + settings.frac_12_bit = FRAC; + settings.int_16_bit = N; + settings.mod_12_bit = MOD; + settings.clock_divider_12_bit = std::max<boost::uint16_t>(1, std::ceil(PHASE_RESYNC_TIME*pfd_freq/MOD)); + settings.r_counter_10_bit = R; + settings.r_divide_by_2_en = T; + settings.r_doubler_en = D; + settings.band_select_clock_div = BS; + settings.rf_divider = RFdiv; + settings.feedback_after_divider = true; + + UHD_LOGV(often) + << boost::format("ADF 435X Frequencies (MHz): REQUESTED=%0.9f, ACTUAL=%0.9f" + ) % (target_freq/1e6) % (actual_freq/1e6) << std::endl + << boost::format("ADF 435X Intermediates (MHz): VCO=%0.2f, PFD=%0.2f, BAND=%0.2f, REF=%0.2f" + ) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) % (ref_freq/1e6) << std::endl + << boost::format("ADF 435X Settings: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d" + ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl; + + UHD_ASSERT_THROW((settings.frac_12_bit & ((boost::uint16_t)~0xFFF)) == 0); + UHD_ASSERT_THROW((settings.mod_12_bit & ((boost::uint16_t)~0xFFF)) == 0); + UHD_ASSERT_THROW((settings.clock_divider_12_bit & ((boost::uint16_t)~0xFFF)) == 0); + UHD_ASSERT_THROW((settings.r_counter_10_bit & ((boost::uint16_t)~0x3FF)) == 0); + + UHD_ASSERT_THROW(vco_freq >= MIN_VCO_FREQ and vco_freq <= MAX_VCO_FREQ); + UHD_ASSERT_THROW(settings.rf_divider >= static_cast<boost::uint16_t>(constraints.rf_divider_range.start())); + UHD_ASSERT_THROW(settings.rf_divider <= static_cast<boost::uint16_t>(constraints.rf_divider_range.stop())); + UHD_ASSERT_THROW(settings.int_16_bit >= static_cast<boost::uint16_t>(constraints.int_range.start())); + UHD_ASSERT_THROW(settings.int_16_bit <= static_cast<boost::uint16_t>(constraints.int_range.stop())); + + return settings; +} + /*********************************************************************** * Register the SBX dboard (min freq, max freq, rx div2, tx div2) @@ -362,4 +493,3 @@ void sbx_xcvr::flash_leds(void) { this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, (TXIO_MASK|TX_LED_IO)); this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, (RXIO_MASK|RX_LED_IO)); } - diff --git a/host/lib/usrp/dboard/db_sbx_common.hpp b/host/lib/usrp/dboard/db_sbx_common.hpp index 4f3a2eeaa..e9bb2434c 100644 --- a/host/lib/usrp/dboard/db_sbx_common.hpp +++ b/host/lib/usrp/dboard/db_sbx_common.hpp @@ -181,6 +181,34 @@ protected: ~sbx_versionx(void) {} virtual double set_lo_freq(dboard_iface::unit_t unit, double target_freq) = 0; + protected: + struct adf435x_tuning_constraints { + bool force_frac0; + double ref_doubler_threshold; + double pfd_freq_max; + double band_sel_freq_max; + uhd::range_t rf_divider_range; + uhd::range_t int_range; + }; + + struct adf435x_tuning_settings { + boost::uint16_t frac_12_bit; + boost::uint16_t int_16_bit; + boost::uint16_t mod_12_bit; + boost::uint16_t r_counter_10_bit; + bool r_doubler_en; + bool r_divide_by_2_en; + boost::uint16_t clock_divider_12_bit; + boost::uint8_t band_select_clock_div; + boost::uint16_t rf_divider; + bool feedback_after_divider; + }; + + adf435x_tuning_settings _tune_adf435x_synth( + double target_freq, + double ref_freq, + const adf435x_tuning_constraints& constraints, + double& actual_freq); }; /*! diff --git a/host/lib/usrp/dboard/db_sbx_version3.cpp b/host/lib/usrp/dboard/db_sbx_version3.cpp index 2765d530c..b0c9cd18f 100644 --- a/host/lib/usrp/dboard/db_sbx_version3.cpp +++ b/host/lib/usrp/dboard/db_sbx_version3.cpp @@ -63,85 +63,21 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar (16, adf4350_regs_t::RF_DIVIDER_SELECT_DIV16) ; - double actual_freq, pfd_freq; - double ref_freq = self_base->get_iface()->get_clock_rate(unit); - int R=0, BS=0, N=0, FRAC=0, MOD=0; - int RFdiv = 1; - adf4350_regs_t::reference_divide_by_2_t T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; - adf4350_regs_t::reference_doubler_t D = adf4350_regs_t::REFERENCE_DOUBLER_DISABLED; - - //Reference doubler for 50% duty cycle - // if ref_freq < 12.5MHz enable regs.reference_divide_by_2 - if(ref_freq <= 12.5e6) D = adf4350_regs_t::REFERENCE_DOUBLER_ENABLED; - - //increase RF divider until acceptable VCO frequency - double vco_freq = target_freq; - while (vco_freq < 2.2e9) { - vco_freq *= 2; - RFdiv *= 2; - } - //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) adf4350_regs_t::prescaler_t prescaler = target_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; - /* - * The goal here is to loop though possible R dividers, - * band select clock dividers, N (int) dividers, and FRAC - * (frac) dividers. - * - * Calculate the N and F dividers for each set of values. - * The loop exits when it meets all of the constraints. - * The resulting loop values are loaded into the registers. - * - * from pg.21 - * - * f_pfd = f_ref*(1+D)/(R*(1+T)) - * f_vco = (N + (FRAC/MOD))*f_pfd - * N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD - * f_rf = f_vco/RFdiv) - * f_actual = f_rf/2 - */ - for(R = 1; R <= 1023; R+=1){ - //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T) - pfd_freq = ref_freq*(1+D)/(R*(1+T)); - - //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth) - if (pfd_freq > 25e6) continue; - - //ignore fractional part of tuning - N = int(std::floor(target_freq/pfd_freq)); - - //keep N > minimum int divider requirement - if (N < prescaler_to_min_int_div[prescaler]) continue; - - for(BS=1; BS <= 255; BS+=1){ - //keep the band select frequency at or below 100KHz - //constraint on band select clock - if (pfd_freq/BS > 100e3) continue; - goto done_loop; - } - } done_loop: - - //Fractional-N calculation - MOD = 4095; //max fractional accuracy - FRAC = int((target_freq/pfd_freq - N)*MOD); - - //Reference divide-by-2 for 50% duty cycle - // if R even, move one divide by 2 to to regs.reference_divide_by_2 - if(R % 2 == 0){ - T = adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED; - R /= 2; - } - - //actual frequency calculation - actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))); + adf435x_tuning_constraints tuning_constraints; + tuning_constraints.force_frac0 = false; + tuning_constraints.band_sel_freq_max = 100e3; + tuning_constraints.ref_doubler_threshold = 12.5e6; + tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095); //INT is a 12-bit field + tuning_constraints.pfd_freq_max = 25e6; + tuning_constraints.rf_divider_range = uhd::range_t(1, 16); - UHD_LOGV(often) - << boost::format("SBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl - << boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d" - ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl - << boost::format("SBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f" - ) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl; + double actual_freq; + adf435x_tuning_settings tuning_settings = _tune_adf435x_synth( + target_freq, self_base->get_iface()->get_clock_rate(unit), + tuning_constraints, actual_freq); //load the register values adf4350_regs_t regs; @@ -151,19 +87,25 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar else regs.output_power = adf4350_regs_t::OUTPUT_POWER_5DBM; - regs.frac_12_bit = FRAC; - regs.int_16_bit = N; - regs.mod_12_bit = MOD; - regs.clock_divider_12_bit = std::max(1, int(std::ceil(400e-6*pfd_freq/MOD))); - regs.feedback_select = adf4350_regs_t::FEEDBACK_SELECT_DIVIDED; - regs.clock_div_mode = adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE; - regs.prescaler = prescaler; - regs.r_counter_10_bit = R; - regs.reference_divide_by_2 = T; - regs.reference_doubler = D; - regs.band_select_clock_div = BS; - UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv)); - regs.rf_divider_select = rfdivsel_to_enum[RFdiv]; + regs.frac_12_bit = tuning_settings.frac_12_bit; + regs.int_16_bit = tuning_settings.int_16_bit; + regs.mod_12_bit = tuning_settings.mod_12_bit; + regs.clock_divider_12_bit = tuning_settings.clock_divider_12_bit; + regs.feedback_select = tuning_settings.feedback_after_divider ? + adf4350_regs_t::FEEDBACK_SELECT_DIVIDED : + adf4350_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; + regs.clock_div_mode = adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE; + regs.prescaler = prescaler; + regs.r_counter_10_bit = tuning_settings.r_counter_10_bit; + regs.reference_divide_by_2 = tuning_settings.r_divide_by_2_en ? + adf4350_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : + adf4350_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; + regs.reference_doubler = tuning_settings.r_doubler_en ? + adf4350_regs_t::REFERENCE_DOUBLER_ENABLED : + adf4350_regs_t::REFERENCE_DOUBLER_DISABLED; + regs.band_select_clock_div = tuning_settings.band_select_clock_div; + UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider)); + regs.rf_divider_select = rfdivsel_to_enum[tuning_settings.rf_divider]; //reset the N and R counter regs.counter_reset = adf4350_regs_t::COUNTER_RESET_ENABLED; diff --git a/host/lib/usrp/dboard/db_sbx_version4.cpp b/host/lib/usrp/dboard/db_sbx_version4.cpp index 27fd68b05..8d95b0655 100644 --- a/host/lib/usrp/dboard/db_sbx_version4.cpp +++ b/host/lib/usrp/dboard/db_sbx_version4.cpp @@ -66,85 +66,21 @@ double sbx_xcvr::sbx_version4::set_lo_freq(dboard_iface::unit_t unit, double tar (64, adf4351_regs_t::RF_DIVIDER_SELECT_DIV64) ; - double actual_freq, pfd_freq; - double ref_freq = self_base->get_iface()->get_clock_rate(unit); - int R=0, BS=0, N=0, FRAC=0, MOD=0; - int RFdiv = 1; - adf4351_regs_t::reference_divide_by_2_t T = adf4351_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; - adf4351_regs_t::reference_doubler_t D = adf4351_regs_t::REFERENCE_DOUBLER_DISABLED; - - //Reference doubler for 50% duty cycle - // if ref_freq < 12.5MHz enable regs.reference_divide_by_2 - if(ref_freq <= 12.5e6) D = adf4351_regs_t::REFERENCE_DOUBLER_ENABLED; - - //increase RF divider until acceptable VCO frequency - double vco_freq = target_freq; - while (vco_freq < 2.2e9) { - vco_freq *= 2; - RFdiv *= 2; - } - //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) - adf4351_regs_t::prescaler_t prescaler = target_freq > 3e9 ? adf4351_regs_t::PRESCALER_8_9 : adf4351_regs_t::PRESCALER_4_5; - - /* - * The goal here is to loop though possible R dividers, - * band select clock dividers, N (int) dividers, and FRAC - * (frac) dividers. - * - * Calculate the N and F dividers for each set of values. - * The loop exits when it meets all of the constraints. - * The resulting loop values are loaded into the registers. - * - * from pg.21 - * - * f_pfd = f_ref*(1+D)/(R*(1+T)) - * f_vco = (N + (FRAC/MOD))*f_pfd - * N = f_vco/f_pfd - FRAC/MOD = f_vco*((R*(T+1))/(f_ref*(1+D))) - FRAC/MOD - * f_rf = f_vco/RFdiv) - * f_actual = f_rf/2 - */ - for(R = 1; R <= 1023; R+=1){ - //PFD input frequency = f_ref/R ... ignoring Reference doubler/divide-by-2 (D & T) - pfd_freq = ref_freq*(1+D)/(R*(1+T)); - - //keep the PFD frequency at or below 25MHz (Loop Filter Bandwidth) - if (pfd_freq > 25e6) continue; - - //ignore fractional part of tuning - N = int(std::floor(vco_freq/pfd_freq)); - - //keep N > minimum int divider requirement - if (N < prescaler_to_min_int_div[prescaler]) continue; - - for(BS=1; BS <= 255; BS+=1){ - //keep the band select frequency at or below 100KHz - //constraint on band select clock - if (pfd_freq/BS > 100e3) continue; - goto done_loop; - } - } done_loop: - - //Fractional-N calculation - MOD = 4095; //max fractional accuracy - FRAC = int((target_freq/pfd_freq - N)*MOD); - - //Reference divide-by-2 for 50% duty cycle - // if R even, move one divide by 2 to to regs.reference_divide_by_2 - if(R % 2 == 0){ - T = adf4351_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED; - R /= 2; - } + adf4351_regs_t::prescaler_t prescaler = target_freq > 3.6e9 ? adf4351_regs_t::PRESCALER_8_9 : adf4351_regs_t::PRESCALER_4_5; - //actual frequency calculation - actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))); + adf435x_tuning_constraints tuning_constraints; + tuning_constraints.force_frac0 = false; + tuning_constraints.band_sel_freq_max = 100e3; + tuning_constraints.ref_doubler_threshold = 12.5e6; + tuning_constraints.int_range = uhd::range_t(prescaler_to_min_int_div[prescaler], 4095); //INT is a 12-bit field + tuning_constraints.pfd_freq_max = 25e6; + tuning_constraints.rf_divider_range = uhd::range_t(1, 64); - UHD_LOGV(often) - << boost::format("SBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl - << boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d" - ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl - << boost::format("SBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f" - ) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl; + double actual_freq; + adf435x_tuning_settings tuning_settings = _tune_adf435x_synth( + target_freq, self_base->get_iface()->get_clock_rate(unit), + tuning_constraints, actual_freq); //load the register values adf4351_regs_t regs; @@ -154,19 +90,25 @@ double sbx_xcvr::sbx_version4::set_lo_freq(dboard_iface::unit_t unit, double tar else regs.output_power = adf4351_regs_t::OUTPUT_POWER_5DBM; - regs.frac_12_bit = FRAC; - regs.int_16_bit = N; - regs.mod_12_bit = MOD; - regs.clock_divider_12_bit = std::max(1, int(std::ceil(400e-6*pfd_freq/MOD))); - regs.feedback_select = adf4351_regs_t::FEEDBACK_SELECT_DIVIDED; - regs.clock_div_mode = adf4351_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE; - regs.prescaler = prescaler; - regs.r_counter_10_bit = R; - regs.reference_divide_by_2 = T; - regs.reference_doubler = D; - regs.band_select_clock_div = BS; - UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv)); - regs.rf_divider_select = rfdivsel_to_enum[RFdiv]; + regs.frac_12_bit = tuning_settings.frac_12_bit; + regs.int_16_bit = tuning_settings.int_16_bit; + regs.mod_12_bit = tuning_settings.mod_12_bit; + regs.clock_divider_12_bit = tuning_settings.clock_divider_12_bit; + regs.feedback_select = tuning_settings.feedback_after_divider ? + adf4351_regs_t::FEEDBACK_SELECT_DIVIDED : + adf4351_regs_t::FEEDBACK_SELECT_FUNDAMENTAL; + regs.clock_div_mode = adf4351_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE; + regs.prescaler = prescaler; + regs.r_counter_10_bit = tuning_settings.r_counter_10_bit; + regs.reference_divide_by_2 = tuning_settings.r_divide_by_2_en ? + adf4351_regs_t::REFERENCE_DIVIDE_BY_2_ENABLED : + adf4351_regs_t::REFERENCE_DIVIDE_BY_2_DISABLED; + regs.reference_doubler = tuning_settings.r_doubler_en ? + adf4351_regs_t::REFERENCE_DOUBLER_ENABLED : + adf4351_regs_t::REFERENCE_DOUBLER_DISABLED; + regs.band_select_clock_div = tuning_settings.band_select_clock_div; + UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(tuning_settings.rf_divider)); + regs.rf_divider_select = rfdivsel_to_enum[tuning_settings.rf_divider]; //reset the N and R counter regs.counter_reset = adf4351_regs_t::COUNTER_RESET_ENABLED; diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp index 253ac1d6f..625926f36 100644 --- a/host/lib/usrp/usrp1/usrp1_impl.cpp +++ b/host/lib/usrp/usrp1/usrp1_impl.cpp @@ -258,12 +258,14 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(rx_codec_path / "gains/pga/range").set(usrp1_codec_ctrl::rx_pga_gain_range); _tree->create<double>(rx_codec_path / "gains/pga/value") - .coerce(boost::bind(&usrp1_impl::update_rx_codec_gain, this, db, _1)); + .coerce(boost::bind(&usrp1_impl::update_rx_codec_gain, this, db, _1)) + .set(0.0); _tree->create<std::string>(tx_codec_path / "name").set("ad9522"); _tree->create<meta_range_t>(tx_codec_path / "gains/pga/range").set(usrp1_codec_ctrl::tx_pga_gain_range); _tree->create<double>(tx_codec_path / "gains/pga/value") .subscribe(boost::bind(&usrp1_codec_ctrl::set_tx_pga_gain, _dbc[db].codec, _1)) - .publish(boost::bind(&usrp1_codec_ctrl::get_tx_pga_gain, _dbc[db].codec)); + .publish(boost::bind(&usrp1_codec_ctrl::get_tx_pga_gain, _dbc[db].codec)) + .set(0.0); } //////////////////////////////////////////////////////////////////// @@ -407,7 +409,7 @@ usrp1_impl::usrp1_impl(const device_addr_t &device_addr){ _tree->access<subdev_spec_t>(mb_path / "rx_subdev_spec").set(_rx_subdev_spec); if (_tree->list(mb_path / "tx_dsps").size() > 0) _tree->access<subdev_spec_t>(mb_path / "tx_subdev_spec").set(_tx_subdev_spec); - + } usrp1_impl::~usrp1_impl(void){ diff --git a/host/lib/utils/paths.cpp b/host/lib/utils/paths.cpp index f9d8b613c..3e2bea1c6 100644 --- a/host/lib/utils/paths.cpp +++ b/host/lib/utils/paths.cpp @@ -34,8 +34,19 @@ namespace fs = boost::filesystem; /*********************************************************************** + * Get a list of paths for an environment variable + **********************************************************************/ +static std::string get_env_var(const std::string &var_name, const std::string &def_val = ""){ + const char *var_value_ptr = std::getenv(var_name.c_str()); + return (var_value_ptr == NULL)? def_val : var_value_ptr; +} + +static std::vector<fs::path> get_env_paths(const std::string &var_name){ + +/*********************************************************************** * Determine the paths separator **********************************************************************/ + #ifdef UHD_PLATFORM_WIN32 static const std::string env_path_sep = ";"; #else @@ -46,16 +57,6 @@ namespace fs = boost::filesystem; boost::tokenizer<boost::char_separator<char> > \ (inp, boost::char_separator<char>(env_path_sep.c_str())) -/*********************************************************************** - * Get a list of paths for an environment variable - **********************************************************************/ -static std::string get_env_var(const std::string &var_name, const std::string &def_val = ""){ - const char *var_value_ptr = std::getenv(var_name.c_str()); - return (var_value_ptr == NULL)? def_val : var_value_ptr; -} - -static std::vector<fs::path> get_env_paths(const std::string &var_name){ - std::string var_value = get_env_var(var_name); //convert to filesystem path, filter blank paths @@ -85,6 +86,7 @@ std::vector<fs::path> get_image_paths(void){ std::vector<fs::path> get_module_paths(void){ std::vector<fs::path> paths = get_env_paths("UHD_MODULE_PATH"); paths.push_back(fs::path(uhd::get_pkg_path()) / UHD_LIB_DIR / "uhd" / "modules"); + paths.push_back(fs::path(uhd::get_pkg_path()) / "share" / "uhd" / "modules"); return paths; } diff --git a/host/lib/utils/tasks.cpp b/host/lib/utils/tasks.cpp index 1f735de06..08c32a5fb 100644 --- a/host/lib/utils/tasks.cpp +++ b/host/lib/utils/tasks.cpp @@ -16,11 +16,13 @@ // #include <uhd/utils/tasks.hpp> +#include <uhd/utils/msg_task.hpp> #include <uhd/utils/msg.hpp> #include <boost/thread/thread.hpp> #include <boost/thread/barrier.hpp> #include <exception> #include <iostream> +#include <vector> using namespace uhd; @@ -80,3 +82,100 @@ private: task::sptr task::make(const task_fcn_type &task_fcn){ return task::sptr(new task_impl(task_fcn)); } + +/* + * During shutdown pointers to queues for radio_ctrl_core might not be available anymore. + * msg_task_impl provides a dump_queue for such messages. + * ctrl_cores can check this queue for stranded messages. + */ + +class msg_task_impl : public msg_task{ +public: + + msg_task_impl(const task_fcn_type &task_fcn): + _spawn_barrier(2) + { + _thread_group.create_thread(boost::bind(&msg_task_impl::task_loop, this, task_fcn)); + _spawn_barrier.wait(); + } + + ~msg_task_impl(void){ + _running = false; + _thread_group.interrupt_all(); + _thread_group.join_all(); + } + + /* + * Returns the first message for the given SID. + * This way a radio_ctrl_core doesn't have to die in timeout but can check for stranded messages here. + * This might happen during shutdown when dtors are called. + * See also: comments in b200_io_impl->handle_async_task + */ + msg_payload_t get_msg_from_dump_queue(boost::uint32_t sid) + { + boost::mutex::scoped_lock lock(_mutex); + msg_payload_t b; + for (size_t i = 0; i < _dump_queue.size(); i++) { + if (sid == _dump_queue[i].first) { + b = _dump_queue[i].second; + _dump_queue.erase(_dump_queue.begin() + i); + break; + } + } + return b; + } + +private: + + void task_loop(const task_fcn_type &task_fcn){ + _running = true; + _spawn_barrier.wait(); + + try{ + while (_running){ + boost::optional<msg_type_t> buff = task_fcn(); + if(buff != boost::none){ + /* + * If a message gets stranded it is returned by task_fcn and then pushed to the dump_queue. + * This way ctrl_cores can check dump_queue for missing messages. + */ + boost::mutex::scoped_lock lock(_mutex); + _dump_queue.push_back(buff.get() ); + } + } + } + catch(const boost::thread_interrupted &){ + //this is an ok way to exit the task loop + } + catch(const std::exception &e){ + do_error_msg(e.what()); + } + catch(...){ + //FIXME + //Unfortunately, this is also an ok way to end a task, + //because on some systems boost throws uncatchables. + } + } + + void do_error_msg(const std::string &msg){ + UHD_MSG(error) + << "An unexpected exception was caught in a task loop." << std::endl + << "The task loop will now exit, things may not work." << std::endl + << msg << std::endl + ; + } + + boost::mutex _mutex; + boost::thread_group _thread_group; + boost::barrier _spawn_barrier; + bool _running; + + /* + * This queue holds stranded messages until a radio_ctrl_core grabs them via 'get_msg_from_dump_queue'. + */ + std::vector <msg_type_t> _dump_queue; +}; + +msg_task::sptr msg_task::make(const task_fcn_type &task_fcn){ + return msg_task::sptr(new msg_task_impl(task_fcn)); +} diff --git a/host/utils/CMakeLists.txt b/host/utils/CMakeLists.txt index 92df0b7cf..f73690475 100644 --- a/host/utils/CMakeLists.txt +++ b/host/utils/CMakeLists.txt @@ -47,9 +47,11 @@ SET(util_share_sources IF(ENABLE_USB) LIST(APPEND util_share_sources fx2_init_eeprom.cpp - b2xx_fx3_utils.cpp + b2xx_fx3_utils ) INCLUDE_DIRECTORIES(${LIBUSB_INCLUDE_DIRS}) + # Additional include directories for b2xx_fx3_utils + INCLUDE_DIRECTORIES(${CMAKE_CURRENT_SOURCE_DIR}/../lib/usrp/b200 ${CMAKE_CURRENT_SOURCE_DIR}/../lib/usrp/common) ENDIF(ENABLE_USB) IF(LINUX AND ENABLE_USB) diff --git a/host/utils/b2xx_fx3_utils.cpp b/host/utils/b2xx_fx3_utils.cpp index abc75d248..50a294359 100644 --- a/host/utils/b2xx_fx3_utils.cpp +++ b/host/utils/b2xx_fx3_utils.cpp @@ -34,39 +34,12 @@ #include <boost/thread/thread.hpp> #include <boost/functional/hash.hpp> +#include <b200_iface.hpp> #include <uhd/config.hpp> -#include <uhd/utils/msg.hpp> - -const static boost::uint16_t FX3_VID = 0x04b4; -const static boost::uint16_t FX3_DEFAULT_PID = 0x00f3; -const static boost::uint16_t FX3_REENUM_PID = 0x00f0; -const static boost::uint16_t B2XX_VID = 0x2500; -const static boost::uint16_t B2XX_PID = 0x0020; - -const static boost::uint8_t VRT_VENDOR_OUT = (LIBUSB_REQUEST_TYPE_VENDOR - | LIBUSB_ENDPOINT_OUT); -const static boost::uint8_t VRT_VENDOR_IN = (LIBUSB_REQUEST_TYPE_VENDOR - | LIBUSB_ENDPOINT_IN); -const static boost::uint8_t FX3_FIRMWARE_LOAD = 0xA0; - -const static boost::uint8_t B2XX_VREQ_FPGA_START = 0x02; -const static boost::uint8_t B2XX_VREQ_FPGA_DATA = 0x12; -const static boost::uint8_t B2XX_VREQ_SET_FPGA_HASH = 0x1C; -const static boost::uint8_t B2XX_VREQ_GET_FPGA_HASH = 0x1D; -const static boost::uint8_t B2XX_VREQ_FPGA_RESET = 0x62; -const static boost::uint8_t B2XX_VREQ_GET_USB = 0x80; -const static boost::uint8_t B2XX_VREQ_GET_STATUS = 0x83; -const static boost::uint8_t B2XX_VREQ_FX3_RESET = 0x99; -const static boost::uint8_t B2XX_VREQ_EEPROM_WRITE = 0xBA; - -const static boost::uint8_t FX3_STATE_FPGA_READY = 0x00; -const static boost::uint8_t FX3_STATE_CONFIGURING_FPGA = 0x01; -const static boost::uint8_t FX3_STATE_BUSY = 0x02; -const static boost::uint8_t FX3_STATE_RUNNING = 0x03; - -typedef boost::uint32_t hash_type; -typedef std::vector<boost::uint8_t> byte_vector_t; - +#include <uhd/transport/usb_control.hpp> +#include <uhd/transport/usb_device_handle.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/images.hpp> namespace po = boost::program_options; namespace fs = boost::filesystem; @@ -90,663 +63,409 @@ boost::uint16_t atoh(const std::string &string){ return boost::lexical_cast<boost::uint16_t>(string); } - -/*! - * Create a file hash - * The hash will be used to identify the loaded firmware and fpga image - * \param filename file used to generate hash value - * \return hash value in a size_t type - */ -static hash_type generate_hash(const char *filename) +int reset_usb() { - std::ifstream file(filename); - if (not file){ - std::cerr << std::string("cannot open input file ") + filename - << std::endl; - } - - size_t hash = 0; - - char ch; - while (file.get(ch)) { - boost::hash_combine(hash, ch); - } - - if (not file.eof()){ - std::cerr << std::string("file error ") + filename << std::endl; - } - - file.close(); - return hash_type(hash); -} - -/*! - * Verify checksum of a Intel HEX record - * \param record a line from an Intel HEX file - * \return true if record is valid, false otherwise - */ -bool checksum(std::string *record) { - - size_t len = record->length(); - unsigned int i; - unsigned char sum = 0; - unsigned int val; - - for (i = 1; i < len; i += 2) { - std::istringstream(record->substr(i, 2)) >> std::hex >> val; - sum += val; - } + /* Okay, first, we need to discover what the path is to the ehci and + * xhci device files. */ + std::set<fs::path> path_list; + path_list.insert("/sys/bus/pci/drivers/xhci-pci/"); + path_list.insert("/sys/bus/pci/drivers/ehci-pci/"); + path_list.insert("/sys/bus/pci/drivers/xhci_hcd/"); + path_list.insert("/sys/bus/pci/drivers/ehci_hcd/"); - if (sum == 0) - return true; - else - return false; -} + /* Check each of the possible paths above to find which ones this system + * uses. */ + for(std::set<fs::path>::iterator found = path_list.begin(); + found != path_list.end(); ++found) { + if(fs::exists(*found)) { -/*! - * Parse Intel HEX record - * - * \param record a line from an Intel HEX file - * \param len output length of record - * \param addr output address - * \param type output type - * \param data output data - * \return true if record is sucessfully read, false on error - */ -bool parse_record(std::string *record, boost::uint16_t &len, boost::uint16_t &addr, - uint16_t &type, unsigned char* data) { - - unsigned int i; - std::string _data; - unsigned int val; - - if (record->substr(0, 1) != ":") - return false; - - std::istringstream(record->substr(1, 2)) >> std::hex >> len; - std::istringstream(record->substr(3, 4)) >> std::hex >> addr; - std::istringstream(record->substr(7, 2)) >> std::hex >> type; - - if (len > (2 * (record->length() - 9))) // sanity check to prevent buffer overrun - return false; - - for (i = 0; i < len; i++) { - std::istringstream(record->substr(9 + 2 * i, 2)) >> std::hex >> val; - data[i] = (unsigned char) val; - } + fs::path devpath = *found; - return true; -} + std::set<fs::path> globbed; + /* Now, glob all of the files in the directory. */ + fs::directory_iterator end_itr; + for(fs::directory_iterator itr(devpath); itr != end_itr; ++itr) { + globbed.insert((*itr).path()); + } -/*! - * Write data to the FX3. - * - * \param dev_handle the libusb-1.0 device handle - * \param request the usb transfer request type - * \param value the USB bValue - * \param index the USB bIndex - * \param buff the data to write - * \param length the number of bytes to write - * \return the number of bytes written - */ -libusb_error fx3_control_write(libusb_device_handle *dev_handle, boost::uint8_t request, - boost::uint16_t value, boost::uint16_t index, unsigned char *buff, - boost::uint16_t length, boost::uint32_t timeout = 0) { - -#if 0 - if(DEBUG) { - std::cout << "Writing: <" << std::hex << std::setw(6) << std::showbase \ - << std::internal << std::setfill('0') << (int) request \ - << ", " << std::setw(6) << (int) VRT_VENDOR_OUT \ - << ", " << std::setw(6) << value \ - << ", " << std::setw(6) << index \ - << ", " << std::dec << std::setw(2) << length \ - << ">" << std::endl; - - std::cout << "\t\tData: 0x " << std::noshowbase; - - for(int count = 0; count < length; count++) { - std::cout << std::hex << std::setw(2) << (int) buff[count] << " "; + /* Check each file path string to see if it is a device file. */ + for(std::set<fs::path>::iterator it = globbed.begin(); + it != globbed.end(); ++it) { + + std::string file = fs::path((*it).filename()).string(); + + if(file.compare(0, 5, "0000:") == 0) { + /* Un-bind the device. */ + std::fstream unbind((devpath.string() + "unbind").c_str(), + std::fstream::out); + unbind << file; + unbind.close(); + + /* Re-bind the device. */ + std::cout << "Re-binding: " << file << " in " + << devpath.string() << std::endl; + std::fstream bind((devpath.string() + "bind").c_str(), + std::fstream::out); + bind << file; + bind.close(); + } + } } - - std::cout << std::showbase << std::endl; } -#endif - return (libusb_error) libusb_control_transfer(dev_handle, VRT_VENDOR_OUT, request, \ - value, index, buff, length, timeout); -} - - -/*! - * Read data from the FX3. - * - * \param dev_handle the libusb-1.0 device handle - * \param request the usb transfer request type - * \param value the USB bValue - * \param index the USB bIndex - * \param buff a buffer to store the read bytes to - * \param length the number of bytes to read - * \return the number of bytes read - */ -libusb_error fx3_control_read(libusb_device_handle *dev_handle, boost::uint8_t request, - boost::uint16_t value, boost::uint16_t index, unsigned char *buff, - boost::uint16_t length, boost::uint32_t timeout = 0) { - -#if 0 - if(DEBUG) { - std::cout << "Reading: <" << std::hex << std::setw(6) << std::showbase \ - << std::internal << std::setfill('0') << (int) request \ - << ", " << std::setw(6) << (int) VRT_VENDOR_IN \ - << ", " << std::setw(6) << value \ - << ", " << std::setw(6) << index \ - << ", " << std::dec << std::setw(2) << length \ - << ">" << std::endl << std::endl; - } -#endif - - return (libusb_error) libusb_control_transfer(dev_handle, VRT_VENDOR_IN, request, \ - value, index, buff, length, timeout); -} - - -void write_eeprom(libusb_device_handle *dev_handle, boost::uint8_t addr, - boost::uint8_t offset, const byte_vector_t &bytes) { - fx3_control_write(dev_handle, B2XX_VREQ_EEPROM_WRITE, - 0, offset | (boost::uint16_t(addr) << 8), - (unsigned char *) &bytes[0], - bytes.size()); -} - - -boost::uint8_t get_fx3_status(libusb_device_handle *dev_handle) { - - unsigned char rx_data[1]; - - fx3_control_read(dev_handle, B2XX_VREQ_GET_STATUS, 0x00, 0x00, rx_data, 1); - - return boost::lexical_cast<boost::uint8_t>(rx_data[0]); -} - -void usrp_get_fpga_hash(libusb_device_handle *dev_handle, hash_type &hash) { - fx3_control_read(dev_handle, B2XX_VREQ_GET_FPGA_HASH, 0x00, 0x00, - (unsigned char*) &hash, 4, 500); -} - -void usrp_set_fpga_hash(libusb_device_handle *dev_handle, hash_type hash) { - fx3_control_write(dev_handle, B2XX_VREQ_SET_FPGA_HASH, 0x00, 0x00, - (unsigned char*) &hash, 4); + return 0; } -boost::int32_t load_fpga(libusb_device_handle *dev_handle, - const std::string filestring) { - - if (filestring.empty()) - { - std::cerr << "load_fpga: input file is empty." << std::endl; - exit(-1); - } - - boost::uint8_t fx3_state = 0; - - const char *filename = filestring.c_str(); - - hash_type hash = generate_hash(filename); - hash_type loaded_hash; usrp_get_fpga_hash(dev_handle, loaded_hash); - if (hash == loaded_hash) return 0; - - size_t file_size = 0; - { - std::ifstream file(filename, std::ios::in | std::ios::binary | std::ios::ate); - file_size = file.tellg(); - } - - std::ifstream file; - file.open(filename, std::ios::in | std::ios::binary); +uhd::transport::usb_device_handle::sptr open_device(const boost::uint16_t vid, const boost::uint16_t pid) +{ + std::vector<uhd::transport::usb_device_handle::sptr> handles; + uhd::transport::usb_device_handle::sptr handle; - if(!file.good()) { - std::cerr << "load_fpga: cannot open FPGA input file." << std::endl; - exit(-1); + try { + handles = uhd::transport::usb_device_handle::get_device_list(vid, pid); // try caller's VID/PID first + if (handles.size() == 0) + handles = uhd::transport::usb_device_handle::get_device_list(FX3_VID, FX3_DEFAULT_PID); // try default Cypress FX3 VID/PID next + if (handles.size() == 0) + handles = uhd::transport::usb_device_handle::get_device_list(FX3_VID, FX3_REENUM_PID); // try reenumerated Cypress FX3 VID/PID next + if (handles.size() == 0) + handles = uhd::transport::usb_device_handle::get_device_list(B200_VENDOR_ID, B200_PRODUCT_ID); // try default B200 VID/PID last + + if (handles.size() > 0) + handle = handles[0]; + + if (!handle) + std::cerr << "Cannot open device" << std::endl; } - - do { - fx3_state = get_fx3_status(dev_handle); - boost::this_thread::sleep(boost::posix_time::milliseconds(10)); - } while(fx3_state != FX3_STATE_FPGA_READY); - - std::cout << "Loading FPGA image: " \ - << filestring << "..." << std::flush; - - unsigned char out_buff[64]; - memset(out_buff, 0x00, sizeof(out_buff)); - fx3_control_write(dev_handle, B2XX_VREQ_FPGA_START, 0, 0, out_buff, 1, 1000); - - do { - fx3_state = get_fx3_status(dev_handle); - boost::this_thread::sleep(boost::posix_time::milliseconds(10)); - } while(fx3_state != FX3_STATE_CONFIGURING_FPGA); - - - size_t bytes_sent = 0; - while(!file.eof()) { - file.read((char *) out_buff, sizeof(out_buff)); - const std::streamsize n = file.gcount(); - if(n == 0) continue; - - boost::uint16_t transfer_count = boost::uint16_t(n); - - /* Send the data to the device. */ - fx3_control_write(dev_handle, B2XX_VREQ_FPGA_DATA, 0, 0, out_buff, - transfer_count, 5000); - - if (bytes_sent == 0) std::cout << " 0%" << std::flush; - const size_t percent_before = size_t((bytes_sent*100)/file_size); - bytes_sent += transfer_count; - const size_t percent_after = size_t((bytes_sent*100)/file_size); - if (percent_before/10 != percent_after/10) { - std::cout << "\b\b\b\b" << std::setw(3) << percent_after - << "%" << std::flush; - } + catch(const std::exception &e) { + std::cerr << "Failed to communicate with the device!" << std::endl; + #ifdef UHD_PLATFORM_WIN32 + std::cerr << "The necessary drivers are not installed. Read the UHD Transport Application Notes for details." << std::endl; + #endif /* UHD_PLATFORM_WIN32 */ + handle.reset(); } - file.close(); - - do { - fx3_state = get_fx3_status(dev_handle); - boost::this_thread::sleep(boost::posix_time::milliseconds(10)); - } while(fx3_state != FX3_STATE_RUNNING); - - usrp_set_fpga_hash(dev_handle, hash); - - std::cout << "\b\b\b\b done" << std::endl; - - return 0; + return handle; } +b200_iface::sptr make_b200_iface(const uhd::transport::usb_device_handle::sptr &handle) +{ + b200_iface::sptr b200; -/*! - * Program the FX3 with a firmware file (Intel HEX format) - * - * \param dev_handle the libusb-1.0 device handle - * \param filestring the filename of the firmware file - * \return 0 for success, otherwise error code - */ -boost::int32_t fx3_load_firmware(libusb_device_handle *dev_handle, \ - std::string filestring) { - - if (filestring.empty()) - { - std::cerr << "fx3_load_firmware: input file is empty." << std::endl; - exit(-1); - } - - const char *filename = filestring.c_str(); - - /* Fields used in each USB control transfer. */ - boost::uint16_t len = 0; - boost::uint16_t type = 0; - boost::uint16_t lower_address_bits = 0x0000; - unsigned char data[512]; - - /* Can be set by the Intel HEX record 0x04, used for all 0x00 records - * thereafter. Note this field takes the place of the 'index' parameter in - * libusb calls, and is necessary for FX3's 32-bit addressing. */ - boost::uint16_t upper_address_bits = 0x0000; - - std::ifstream file; - file.open(filename, std::ifstream::in); + try { + uhd::transport::usb_control::sptr usb_ctrl = uhd::transport::usb_control::make(handle, 0); + b200 = b200_iface::make(usb_ctrl); - if(!file.good()) { - std::cerr << "fx3_load_firmware: cannot open firmware input file" - << std::endl; - exit(-1); + if (!b200) + std::cerr << "Cannot create device interface" << std::endl; } - - std::cout << "Loading firmware image: " \ - << filestring << "..." << std::flush; - - while (!file.eof()) { - boost::int32_t ret = 0; - std::string record; - file >> record; - - if (!(record.length() > 0)) - continue; - - /* Check for valid Intel HEX record. */ - if (!checksum(&record) || !parse_record(&record, len, \ - lower_address_bits, type, data)) { - std::cerr << "fx3_load_firmware: bad intel hex record checksum" - << std::endl; - } - - /* Type 0x00: Data. */ - if (type == 0x00) { - ret = fx3_control_write(dev_handle, FX3_FIRMWARE_LOAD, \ - lower_address_bits, upper_address_bits, data, len); - - if (ret < 0) { - std::cerr << "usrp_load_firmware: usrp_control_write failed" - << std::endl; - } - } - - /* Type 0x01: EOF. */ - else if (type == 0x01) { - if (lower_address_bits != 0x0000 || len != 0 ) { - std::cerr << "fx3_load_firmware: For EOF record, address must be 0, length must be 0." << std::endl; - } - - /* Successful termination! */ - file.close(); - - /* Let the system settle. */ - boost::this_thread::sleep(boost::posix_time::milliseconds(1000)); - return 0; - } - - /* Type 0x04: Extended Linear Address Record. */ - else if (type == 0x04) { - if (lower_address_bits != 0x0000 || len != 2 ) { - std::cerr << "fx3_load_firmware: For ELA record, address must be 0, length must be 2." << std::endl; - } - - upper_address_bits = ((boost::uint16_t)((data[0] & 0x00FF) << 8))\ - + ((boost::uint16_t)(data[1] & 0x00FF)); - } - - /* Type 0x05: Start Linear Address Record. */ - else if (type == 0x05) { - if (lower_address_bits != 0x0000 || len != 4 ) { - std::cerr << "fx3_load_firmware: For SLA record, address must be 0, length must be 4." << std::endl; - } - - /* The firmware load is complete. We now need to tell the CPU - * to jump to an execution address start point, now contained within - * the data field. Parse these address bits out, and then push the - * instruction. */ - upper_address_bits = ((boost::uint16_t)((data[0] & 0x00FF) << 8))\ - + ((boost::uint16_t)(data[1] & 0x00FF)); - lower_address_bits = ((boost::uint16_t)((data[2] & 0x00FF) << 8))\ - + ((boost::uint16_t)(data[3] & 0x00FF)); - - fx3_control_write(dev_handle, FX3_FIRMWARE_LOAD, lower_address_bits, \ - upper_address_bits, 0, 0); - - std::cout << " done" << std::endl; - } - - /* If we receive an unknown record type, error out. */ - else { - std::cerr << "fx3_load_firmware: unsupported record type." << std::endl; - } + catch(const std::exception &e) { + std::cerr << "Failed to communicate with the device!" << std::endl; + #ifdef UHD_PLATFORM_WIN32 + std::cerr << "The necessary drivers are not installed. Read the UHD Transport Application Notes for details." << std::endl; + #endif /* UHD_PLATFORM_WIN32 */ + b200.reset(); } - /* There was no valid EOF. */ - std::cerr << "fx3_load_firmware: No EOF record found." << std::cout; - return ~0; + return b200; } - boost::int32_t main(boost::int32_t argc, char *argv[]) { boost::uint16_t vid, pid; std::string pid_str, vid_str, fw_file, fpga_file; - po::options_description desc("Allowed options"); - desc.add_options() + po::options_description visible("Allowed options"); + visible.add_options() ("help,h", "help message") - ("vid,v", po::value<std::string>(&vid_str)->default_value("0x2500"), + ("vid,v", po::value<std::string>(&vid_str), "Specify VID of device to use.") - ("pid,p", po::value<std::string>(&pid_str)->default_value("0x0020"), + ("pid,p", po::value<std::string>(&pid_str), "Specify PID of device to use.") ("speed,S", "Read back the USB mode currently in use.") ("reset-device,D", "Reset the B2xx Device.") ("reset-fpga,F", "Reset the FPGA (does not require re-programming.") ("reset-usb,U", "Reset the USB subsystem on your host computer.") ("init-device,I", "Initialize a B2xx device.") - ("load-fw,W", po::value<std::string>(&fw_file)->default_value(""), + ("load-fw,W", po::value<std::string>(&fw_file), "Load a firmware (hex) file into the FX3.") - ("load-fpga,L", po::value<std::string>(&fpga_file)->default_value(""), + ("load-fpga,L", po::value<std::string>(&fpga_file), "Load a FPGA (bin) file into the FPGA.") ; + // Hidden options provided for testing - use at your own risk! + po::options_description hidden("Hidden options"); + hidden.add_options() + ("uninit-device,U", "Uninitialize a B2xx device.") + ("read-eeprom,R", "Read first 8 bytes of EEPROM") + ("erase-eeprom,E", "Erase first 8 bytes of EEPROM"); + + po::options_description desc; + desc.add(visible); + desc.add(hidden); + po::variables_map vm; po::store(po::parse_command_line(argc, argv, desc), vm); po::notify(vm); if (vm.count("help")){ - std::cout << boost::format("B2xx Utilitiy Program %s") % desc << std::endl; + try { + std::cout << boost::format("B2xx Utility Program %s") % visible << std::endl; + } catch(...) {} return ~0; } else if (vm.count("reset-usb")) { - /* Okay, first, we need to discover what the path is to the ehci and - * xhci device files. */ - std::set<fs::path> path_list; - path_list.insert("/sys/bus/pci/drivers/xhci-pci/"); - path_list.insert("/sys/bus/pci/drivers/ehci-pci/"); - path_list.insert("/sys/bus/pci/drivers/xhci_hcd/"); - path_list.insert("/sys/bus/pci/drivers/ehci_hcd/"); + return reset_usb(); + } - /* Check each of the possible paths above to find which ones this system - * uses. */ - for(std::set<fs::path>::iterator found = path_list.begin(); - found != path_list.end(); ++found) { + uhd::transport::usb_device_handle::sptr handle; + b200_iface::sptr b200; - if(fs::exists(*found)) { + vid = B200_VENDOR_ID; // Default + pid = B200_PRODUCT_ID; // Default + try { + if (vm.count("vid")) + vid = atoh(vid_str); + if (vm.count("pid")) + pid = atoh(pid_str); + } catch (std::exception &e) { + std::cerr << "Exception while parsing VID and PID" << e.what() << std:: endl; + return ~0; + } - fs::path devpath = *found; + // open the device + handle = open_device(vid, pid); + if (!handle) + return -1; + std::cout << "B2xx detected..." << std::flush; - std::set<fs::path> globbed; + // make the interface + b200 = make_b200_iface(handle); + if (!b200) + return -1; + std::cout << " Control of B2xx granted..." << std::endl << std::endl; - /* Now, glob all of the files in the directory. */ - fs::directory_iterator end_itr; - for(fs::directory_iterator itr(devpath); itr != end_itr; ++itr) { - globbed.insert((*itr).path()); - } + // if we are supposed to load a new firmware image and one already exists, reset the FX3 so we can load the new one + if (vm.count("load-fw") && handle->firmware_loaded()) + { + std::cout << "Overwriting existing firmware" << std::endl; - /* Check each file path string to see if it is a device file. */ - for(std::set<fs::path>::iterator it = globbed.begin(); - it != globbed.end(); ++it) { - - std::string file = fs::path((*it).filename()).string(); - - if(file.compare(0, 5, "0000:") == 0) { - /* Un-bind the device. */ - std::fstream unbind((devpath.string() + "unbind").c_str(), - std::fstream::out); - unbind << file; - unbind.close(); - - /* Re-bind the device. */ - std::cout << "Re-binding: " << file << " in " - << devpath.string() << std::endl; - std::fstream bind((devpath.string() + "bind").c_str(), - std::fstream::out); - bind << file; - bind.close(); - } - } - } - } + // reset the device + b200->reset_fx3(); - return 0; + // re-open device + b200.reset(); + handle.reset(); + boost::this_thread::sleep(boost::posix_time::seconds(2)); // wait 2 seconds for FX3 to reset + handle = open_device(vid, pid); + if (!handle) + return -1; + b200 = make_b200_iface(handle); + if (!b200) + return -1; } - try { - vid = atoh(vid_str); - } catch (std::exception const& e) { - std::cerr << std::flush << "Exception while parsing vid: " - << e.what() << std::endl; - return ~0; - } - try { - pid = atoh(pid_str); - } catch (std::exception const& e) { - std::cerr << std::flush << "Exception while parsing pid: " - << e.what() << std::endl; - return ~0; + // Check to make sure firmware is loaded + if (!(handle->firmware_loaded())) + { + std::cout << "Loading firmware" << std::endl; + + if (fw_file.empty()) + fw_file = uhd::find_image_path(B200_FW_FILE_NAME); + + if(fw_file.empty()) { + std::cerr << "Firmware image not found!" << std::endl; + return -1; + } + + if(!(fs::exists(fw_file))) { + std::cerr << "Invalid filepath: " << fw_file << std::endl; + return -1; + } + + // load firmware + try { + b200->load_firmware(fw_file); + } catch (std::exception &e) { + std::cerr << "Exception while loading firmware" << e.what() << std::endl; + return ~0; + } + + // re-open device + b200.reset(); + handle.reset(); + handle = open_device(vid, pid); + if (!handle) + return -1; + b200 = make_b200_iface(handle); + if (!b200) + return -1; } - /* Pointer to pointer of device, used to retrieve a list of devices. */ - libusb_device **devs; - libusb_device_handle *dev_handle; - libusb_context *ctx = NULL; - libusb_error error_code; - - libusb_init(&ctx); - libusb_set_debug(ctx, 3); - libusb_get_device_list(ctx, &devs); - - /* If we are initializing the device, the VID/PID will default to the - * Cypress VID/PID for the initial FW load. */ - if (vm.count("init-device")) { - dev_handle = libusb_open_device_with_vid_pid(ctx, FX3_VID, - FX3_DEFAULT_PID); - if(dev_handle == NULL) { - std::cerr << "Cannot open device with vid: " << vid << " and pid: " - << pid << std::endl; + // Added for testing purposes - not exposed + if (vm.count("read-eeprom")) + { + uhd::byte_vector_t data; + + try { + data = b200->read_eeprom(0x0, 0x0, 8); + } catch (std::exception &e) { + std::cerr << "Exception while reading EEPROM: " << e.what() << std::endl; return -1; - } else { std::cout << "Uninitialized B2xx detected..." << std::flush; } - libusb_free_device_list(devs, 1); + } + for (int i = 0; i < 8; i++) + std::cout << i << ": " << boost::format("0x%X") % (int)data[i] << std::endl; + + return 0; + } - /* Find out if kernel driver is attached, and if so, detach it. */ - if(libusb_kernel_driver_active(dev_handle, 0) == 1) { - std::cout << " Competing Driver Identified... " << std::flush; + // Added for testing purposes - not exposed + if (vm.count("erase-eeprom")) + { + uhd::byte_vector_t bytes(8); + memset(&bytes[0], 0xFF, 8); + try { + b200->write_eeprom(0x0, 0x0, bytes); + } catch (uhd::exception &e) { + std::cerr << "Exception while writing to EEPROM: " << e.what() << std::endl; + return -1; + } - if(libusb_detach_kernel_driver(dev_handle, 0) == 0) { - std::cout << " Competing Driver Destroyed!" << std::flush; + // verify + uhd::byte_vector_t read_bytes(8); + try { + read_bytes = b200->read_eeprom(0x0, 0x0, 8); + } catch (uhd::exception &e) { + std::cerr << "Exception while reading from EEPROM: " << e.what() << std::endl; + return -1; + } + bool verified = true; + for (int i = 0; i < 8; i++) { + if (bytes[i] != read_bytes[i]) { + verified = false; + std::cerr << "Expected: " << bytes[i] << ", Got: " << read_bytes[i] << std::endl; } } - libusb_claim_interface(dev_handle, 0); - std::cout << " Control of B2xx granted..." << std::endl << std::endl; - - /* Load the FW. */ - error_code = (libusb_error) fx3_load_firmware(dev_handle, fw_file); - if(error_code != 0) { - std::cerr << std::flush << "Error loading firmware. Error code: " - << error_code << std::endl; - libusb_release_interface(dev_handle, 0); - libusb_close(dev_handle); - libusb_exit(ctx); - return ~0; + if (!verified) { + std::cerr << "Verification failed" << std::endl; + return -1; } - /* Let the device re-enumerate. */ - libusb_release_interface(dev_handle, 0); - libusb_close(dev_handle); - dev_handle = libusb_open_device_with_vid_pid(ctx, FX3_VID, - FX3_REENUM_PID); - if(dev_handle == NULL) { - std::cerr << "Cannot open device with vid: " << vid << " and pid: " - << pid << std::endl; + std::cout << "Erase Successful!" << std::endl; + + return 0; + } + + // Added for testing purposes - not exposed + if (vm.count("uninit-device")) + { + // uninitialize the device + uhd::byte_vector_t bytes(8); + memset(&bytes[0], 0xFF, 8); + + try { + b200->write_eeprom(0x0, 0x0, bytes); + } catch (uhd::exception &e) { + std::cerr << "Exception while writing to EEPROM: " << e.what() << std::endl; return -1; - } else { - std::cout << "Detected in-progress init of B2xx..." << std::flush; } - //libusb_free_device_list(devs, 1); - libusb_claim_interface(dev_handle, 0); - std::cout << " Reenumeration complete, Device claimed..." - << std::endl; + std::cout << "EEPROM uninitialized, resetting device..." + << std::endl << std::endl; + + // reset the device + try { + b200->reset_fx3(); + } catch (uhd::exception &e) { + std::cerr << "Exception while resetting FX3: " << e.what() << std::endl; + return -1; + } + + std::cout << "Uninitialization Process Complete." + << std::endl << std::endl; + + return 0; + } + + /* If we are initializing the device, the VID/PID should default to the + * Cypress VID/PID for the initial FW load, but we can initialize from any state. */ + if (vm.count("init-device")) + { /* Now, initialize the device. */ - byte_vector_t bytes(8); + uhd::byte_vector_t bytes(8); bytes[0] = 0x43; bytes[1] = 0x59; bytes[2] = 0x14; bytes[3] = 0xB2; - bytes[4] = (B2XX_PID & 0xff); - bytes[5] = (B2XX_PID >> 8); - bytes[6] = (B2XX_VID & 0xff); - bytes[7] = (B2XX_VID >> 8); - write_eeprom(dev_handle, 0x0, 0x0, bytes); + bytes[4] = (B200_PRODUCT_ID & 0xff); + bytes[5] = (B200_PRODUCT_ID >> 8); + bytes[6] = (B200_VENDOR_ID & 0xff); + bytes[7] = (B200_VENDOR_ID >> 8); + + try { + b200->write_eeprom(0x0, 0x0, bytes); + } catch (uhd::exception &e) { + std::cerr << "Exception while writing to EEPROM: " << e.what() << std::endl; + return -1; + } + std::cout << "EEPROM initialized, resetting device..." << std::endl << std::endl; /* Reset the device! */ - boost::uint8_t data_buffer[1]; - fx3_control_write(dev_handle, B2XX_VREQ_FX3_RESET, - 0x00, 0x00, data_buffer, 1, 5000); + try { + b200->reset_fx3(); + } catch (const std::exception &e) { + std::cerr << "Exceptions while resetting device: " << e.what() << std::endl; + return -1; + } std::cout << "Initialization Process Complete." << std::endl << std::endl; - libusb_release_interface(dev_handle, 0); - libusb_close(dev_handle); - libusb_exit(ctx); return 0; } - dev_handle = libusb_open_device_with_vid_pid(ctx, vid, pid); - if(dev_handle == NULL) { - std::cerr << "Cannot open device with vid: " << vid << " and pid: " - << pid << std::endl; - return -1; - } else { std::cout << "Reactor Core Online..." << std::flush; } - libusb_free_device_list(devs, 1); - - /* Find out if kernel driver is attached, and if so, detach it. */ - if(libusb_kernel_driver_active(dev_handle, 0) == 1) { - std::cout << " Competing Driver Identified... " << std::flush; - - if(libusb_detach_kernel_driver(dev_handle, 0) == 0) { - std::cout << " Competing Driver Destroyed!" << std::flush; - } - } - - /* Claim interface 0 of device. */ - error_code = (libusb_error) libusb_claim_interface(dev_handle, 0); - std::cout << " All Systems Nominal..." << std::endl << std::endl; - boost::uint8_t data_buffer[16]; memset(data_buffer, 0x0, sizeof(data_buffer)); if (vm.count("speed")){ - error_code = fx3_control_read(dev_handle, B2XX_VREQ_GET_USB, - 0x00, 0x00, data_buffer, 1, 5000); - - boost::uint8_t speed = boost::lexical_cast<boost::uint8_t>(data_buffer[0]); - + boost::uint8_t speed; + try {speed = b200->get_usb_speed();} + catch (uhd::exception &e) { + std::cerr << "Exception while getting USB speed: " << e.what() << std::endl; + return -1; + } std::cout << "Currently operating at USB " << (int) speed << std::endl; } else if (vm.count("reset-device")) { - error_code = fx3_control_write(dev_handle, B2XX_VREQ_FX3_RESET, - 0x00, 0x00, data_buffer, 1, 5000); + try {b200->reset_fx3();} + catch (uhd::exception &e) { + std::cerr << "Exception while resetting FX3: " << e.what() << std::endl; + return -1; + } } else if (vm.count("reset-fpga")) { - error_code = fx3_control_write(dev_handle, B2XX_VREQ_FPGA_RESET, - 0x00, 0x00, data_buffer, 1, 5000); - - } else if (vm.count("load-fw")) { - error_code = (libusb_error) fx3_load_firmware(dev_handle, fw_file); - - if(error_code != 0) { - std::cerr << std::flush << "Error loading firmware. Error code: " - << error_code << std::endl; - libusb_release_interface(dev_handle, 0); - libusb_close(dev_handle); - libusb_exit(ctx); - return ~0; + try {b200->set_fpga_reset_pin(true);} + catch (uhd::exception &e) { + std::cerr << "Exception while resetting FPGA: " << e.what() << std::endl; + return -1; } + } else if (vm.count("load-fw")) { std::cout << "Firmware load complete, releasing USB interface..." << std::endl; } else if (vm.count("load-fpga")) { - try { - error_code = (libusb_error) load_fpga(dev_handle, fpga_file); - } catch (std::exception const& e) { - std::cerr << std::flush << "Exception while loading FPGA: " - << e.what() << std::endl; - if (error_code == 0) - error_code = LIBUSB_ERROR_OTHER; + std::cout << "Loading FPGA image (" << fpga_file << ")" << std::endl; + uint32_t fx3_state; + try {fx3_state = b200->load_fpga(fpga_file);} // returns 0 on success, or FX3 state on error + catch (uhd::exception &e) { + std::cerr << "Exception while loading FPGA: " << e.what() << std::endl; + return ~0; } - if(error_code != 0) { - std::cerr << std::flush << "Error loading FPGA. Error code: " - << error_code << std::endl; - libusb_release_interface(dev_handle, 0); - libusb_close(dev_handle); - libusb_exit(ctx); + if (fx3_state != 0) { + std::cerr << std::flush << "Error loading FPGA. FX3 state: " + << fx3_state << std::endl; return ~0; } @@ -755,19 +474,12 @@ boost::int32_t main(boost::int32_t argc, char *argv[]) { } else { try { - std::cout << boost::format("B2xx Utilitiy Program %s") % desc << std::endl; - } catch (std::exception const& e) {} - libusb_release_interface(dev_handle, 0); - libusb_close(dev_handle); - libusb_exit(ctx); + std::cout << boost::format("B2xx Utility Program %s") % visible << std::endl; + } catch(...) {} return ~0; } - std::cout << std::endl << "Reactor Shutting Down..." << std::endl; - - error_code = (libusb_error) libusb_release_interface(dev_handle, 0); - libusb_close(dev_handle); - libusb_exit(ctx); + std::cout << "Operation complete! I did it! I did it!" << std::endl; return 0; } diff --git a/host/utils/uhd_images_downloader.py.in b/host/utils/uhd_images_downloader.py.in index e7fc9e8a5..bb082190c 100644 --- a/host/utils/uhd_images_downloader.py.in +++ b/host/utils/uhd_images_downloader.py.in @@ -44,13 +44,25 @@ class temp_dir(): self.name = tempfile.mkdtemp() return self.name def __exit__(self, type, value, traceback): - os.removedirs(self.name) + try: + shutil.rmtree(self.name) + except OSError,e: + #Utility should have already detected this, but this is for safety + print str(e) + raise Exception("Could not install images! Make sure you have write permissions.") if __name__ == "__main__": + print + if os.environ.get("UHD_IMAGES_DIR") != None and os.environ.get("UHD_IMAGES_DIR") != "": + default_images_dir = os.environ.get("UHD_IMAGES_DIR") + print "UHD_IMAGES_DIR environment variable is set. Default install location: %s" % default_images_dir + else: + default_images_dir = "@CMAKE_INSTALL_PREFIX@/share/uhd/images" + #Command line options parser = OptionParser() - parser.add_option("--install-location", type="string", default="", help="Set custom install location for images") + parser.add_option("--install-location", type="string", default=default_images_dir, help="Set custom install location for images") parser.add_option("--buffer-size", type="int", default=8192, help="Set download buffer size, [default=%default]",) (options, args) = parser.parse_args() @@ -59,17 +71,27 @@ if __name__ == "__main__": images_zip_md5sum = "@UHD_IMAGES_MD5SUM@" filename = images_src.split("/")[-1] + #Use this directory with relative paths + current_directory = os.getcwd() + with temp_dir() as dirname: os.chdir(dirname) - #Configuring image destination - if options.install_location != "": + if os.path.isabs(options.install_location): + #Custom absolute path given images_dir = options.install_location - elif os.environ.get("UHD_IMAGES_DIR") != "" and os.environ.get("UHD_IMAGES_DIR") != None: - images_dir = os.environ.get("UHD_IMAGES_DIR") else: - images_dir = "@CMAKE_INSTALL_PREFIX@/share/uhd/images" - + #Custom relative path given, so construct absolute path + images_dir = os.path.abspath(os.path.join(current_directory, options.install_location)) + + #Before doing anything, check for write permissions in parent directory + parent_directory = os.path.dirname(images_dir) + if os.access(parent_directory, os.W_OK): + print "Downloading images to: %s" % images_dir + else: + print "You do not have write permissions at the install location!" + sys.exit(1) + opener = urllib2.build_opener() opener.add_headers = [('User-Agent', 'UHD Images Downloader')] u = opener.open(images_src) @@ -101,32 +123,37 @@ if __name__ == "__main__": if images_zip_md5sum != downloaded_zip_md5sum: print "\nMD5 checksum does not match!" print "Expected %s, got %s" % (images_zip_md5sum, downloaded_zip_md5sum) + print "Images did not install. If problem persists, please contact support@ettus.com." os.remove(filename) os.chdir("/".join(images_dir.split("/")[:-1])) + sys.exit(1) else: + temp_path = "tempdir" + #Extracting contents of zip file - if os.path.exists("tempdir"): - shutil.rmtree("tempdir") - os.mkdir("tempdir") + if os.path.exists(temp_path): + shutil.rmtree(temp_path) + os.mkdir(temp_path) images_zip = zipfile.ZipFile(filename) - images_zip.extractall("tempdir") + images_zip.extractall(temp_path) #Removing images currently in images_dir if os.path.exists(images_dir): try: shutil.rmtree(images_dir) - except: - sys.stderr.write("\nMake sure you have write permissions in the images directory.\n") - sys.exit(0) + except OSError,e: + print str(e) + print "Make sure you have write permissions in the images directory." + sys.exit(1) #Copying downloaded images into images_dir - shutil.copytree("tempdir/%s/share/uhd/images" % filename[:-4],images_dir) + shutil.copytree(os.path.join(temp_path, os.path.splitext(filename)[0], 'share', 'uhd', 'images'), images_dir) #Removing tempdir and zip file - shutil.rmtree("tempdir") + shutil.rmtree(temp_path) images_zip.close() os.remove(filename) os.chdir(images_dir) - print "\nImages successfully installed to: %s" % images_dir + print "\n\nImages successfully installed!" diff --git a/host/utils/usrp_burn_mb_eeprom.cpp b/host/utils/usrp_burn_mb_eeprom.cpp index 1b13fb615..ce0879c8e 100644 --- a/host/utils/usrp_burn_mb_eeprom.cpp +++ b/host/utils/usrp_burn_mb_eeprom.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010 Ettus Research LLC +// Copyright 2010,2013 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -19,9 +19,11 @@ #include <uhd/device.hpp> #include <uhd/property_tree.hpp> #include <uhd/usrp/mboard_eeprom.hpp> +#include <boost/algorithm/string.hpp> #include <boost/program_options.hpp> #include <boost/format.hpp> #include <iostream> +#include <vector> namespace po = boost::program_options; @@ -32,8 +34,8 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ desc.add_options() ("help", "help message") ("args", po::value<std::string>(&args)->default_value(""), "device address args [default = \"\"]") - ("key", po::value<std::string>(&key), "the indentifier for a value in EEPROM") - ("val", po::value<std::string>(&val), "the new value to set, omit for readback") + ("key", po::value<std::string>(&key), "identifiers for new values in EEPROM, separate multiple by \",\"") + ("val", po::value<std::string>(&val), "the new values to set, omit for readback, separate multiple by \",\"") ; po::variables_map vm; @@ -55,20 +57,35 @@ int UHD_SAFE_MAIN(int argc, char *argv[]){ uhd::property_tree::sptr tree = dev->get_tree(); std::cout << std::endl; - if (true /*always readback*/){ - std::cout << "Fetching current settings from EEPROM..." << std::endl; - uhd::usrp::mboard_eeprom_t mb_eeprom = tree->access<uhd::usrp::mboard_eeprom_t>("/mboards/0/eeprom").get(); - if (not mb_eeprom.has_key(key)){ - std::cerr << boost::format("Cannot find value for EEPROM[%s]") % key << std::endl; + //remove whitespace, split arguments and values + boost::algorithm::erase_all(key, " "); + boost::algorithm::erase_all(val, " "); + + std::vector<std::string> keys_vec, vals_vec; + boost::split(keys_vec, key, boost::is_any_of("\"',")); + boost::split(vals_vec, val, boost::is_any_of("\"',")); + + if((keys_vec.size() != vals_vec.size()) and val != "") { + //If zero values are given, then user just wants values read to them + throw std::runtime_error("Number of keys must match number of values!"); + } + + std::cout << "Fetching current settings from EEPROM..." << std::endl; + uhd::usrp::mboard_eeprom_t mb_eeprom = tree->access<uhd::usrp::mboard_eeprom_t>("/mboards/0/eeprom").get(); + for(size_t i = 0; i < keys_vec.size(); i++){ + if (not mb_eeprom.has_key(keys_vec[i])){ + std::cerr << boost::format("Cannot find value for EEPROM[%s]") % keys_vec[i] << std::endl; return EXIT_FAILURE; } - std::cout << boost::format(" EEPROM [\"%s\"] is \"%s\"") % key % mb_eeprom[key] << std::endl; - std::cout << std::endl; + std::cout << boost::format(" EEPROM [\"%s\"] is \"%s\"") % keys_vec[i] % mb_eeprom[keys_vec[i]] << std::endl; } + std::cout << std::endl; if (vm.count("val")){ - uhd::usrp::mboard_eeprom_t mb_eeprom; mb_eeprom[key] = val; - std::cout << boost::format("Setting EEPROM [\"%s\"] to \"%s\"...") % key % val << std::endl; - tree->access<uhd::usrp::mboard_eeprom_t>("/mboards/0/eeprom").set(mb_eeprom); + for(size_t i = 0; i < vals_vec.size(); i++){ + uhd::usrp::mboard_eeprom_t mb_eeprom; mb_eeprom[keys_vec[i]] = vals_vec[i]; + std::cout << boost::format("Setting EEPROM [\"%s\"] to \"%s\"...") % keys_vec[i] % vals_vec[i] << std::endl; + tree->access<uhd::usrp::mboard_eeprom_t>("/mboards/0/eeprom").set(mb_eeprom); + } std::cout << "Power-cycle the USRP device for the changes to take effect." << std::endl; std::cout << std::endl; } |