Merge branch 'gpmc_testing' into ethfifo_reorg

* gpmc_testing:
  timed packet generator : Temporarily use a checksum rather than a crc to validate packet integrity.
  correct port names
  fifo36_mux now has shortfifos on the input ports as well as output
  timed tester : Bring out src/dst flags for rx chain for testing.
  u1e: hook up tester controls
  move declarations to before use
  hook up under/overruns for debug purposes
  e100: integrate loopback and timed testing into main image
  Fix endianess for packet length and sequence number for e100 timed image.
  put these files in the right place.  newfifo is long gone.

1 files changed, 18 insertions, 81 deletions

diff --git a/usrp2/top/u1e/u1e_core.v b/usrp2/top/u1e/u1e_core.v
index 7d5924bea..a5a477202 100644
--- a/usrp2/top/u1e/u1e_core.v
+++ b/usrp2/top/u1e/u1e_core.v
@@ -1,9 +1,5 @@
 
 
-//`define LOOPBACK 1
-//`define TIMED 1
-`define DSP 1
-
 module u1e_core
   (input clk_fpga, input rst_fpga,
    output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
@@ -48,13 +44,18 @@ module u1e_core
    wire 	pps_int;
    wire [63:0] 	vita_time, vita_time_pps;
    reg [15:0] 	reg_leds, reg_cgen_ctrl, reg_test, xfer_rate;
+   wire [7:0] 	test_rate;
+   wire [3:0] 	test_ctrl;
    
    wire [7:0] 	set_addr;
    wire [31:0] 	set_data;
    wire 	set_stb;
 
    wire [31:0] 	debug_vt;
-
+   wire 	rx_overrun_dsp, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc;
+   assign rx_overrun = rx_overrun_gpmc | rx_overrun_dsp;
+   assign tx_underrun = tx_underrun_gpmc | tx_underrun_dsp;
+   
    setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset
      (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
       .in(set_data),.out(),.changed(global_reset));
@@ -79,7 +80,6 @@ module u1e_core
 		 tx_err_src_rdy, tx_err_dst_rdy;
    reg [15:0] 	 tx_frame_len;
    wire [15:0] 	 rx_frame_len;
-   wire [7:0] 	 rate;
 
    wire 	 bus_error;
    wire 	 clear_tx, clear_rx;
@@ -111,62 +111,15 @@ module u1e_core
 	 .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy),
 	 
 	 .tx_frame_len(tx_frame_len), .rx_frame_len(rx_frame_len),
+	 .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc),
+
+	 .test_rate(test_rate), .test_ctrl(test_ctrl),
 	 .debug(debug_gpmc));
 
    wire 	 rx_sof = rx_data[32];
    wire 	 rx_eof = rx_data[33];
    wire 	 rx_src_rdy_int, rx_dst_rdy_int, tx_src_rdy_int, tx_dst_rdy_int;
    
-`ifdef LOOPBACK
-   wire [7:0] 	 WHOAMI = 1;
-   
-   fifo_cascade #(.WIDTH(36), .SIZE(12)) loopback_fifo
-     (.clk(wb_clk), .reset(wb_rst), .clear(clear_tx | clear_rx),
-      .datain(tx_data), .src_rdy_i(tx_src_rdy), .dst_rdy_o(tx_dst_rdy),
-      .dataout(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
-
-   assign tx_underrun = 0;
-   assign rx_overrun = 0;
-
-   wire 	 run_tx, run_rx, strobe_tx, strobe_rx;
-`endif // LOOPBACK
-
-`ifdef TIMED
-   wire [7:0] 	 WHOAMI = 2;
-   
-   // TX side
-   wire 	 tx_enable;
-   
-   fifo_pacer tx_pacer
-     (.clk(wb_clk), .reset(wb_rst), .rate(rate), .enable(tx_enable),
-      .src1_rdy_i(tx_src_rdy), .dst1_rdy_o(tx_dst_rdy),
-      .src2_rdy_o(tx_src_rdy_int), .dst2_rdy_i(tx_dst_rdy_int),
-      .underrun(tx_underrun), .overrun());
-   
-   packet_verifier32 pktver32
-     (.clk(wb_clk), .reset(wb_rst), .clear(clear_tx),
-      .data_i(tx_data), .src_rdy_i(tx_src_rdy_int), .dst_rdy_o(tx_dst_rdy_int),
-      .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err));
-
-   // RX side
-   wire 	 rx_enable;
-
-   packet_generator32 pktgen32
-     (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx),
-      .data_o(rx_data), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int));
-
-   fifo_pacer rx_pacer
-     (.clk(wb_clk), .reset(wb_rst), .rate(rate), .enable(rx_enable),
-      .src1_rdy_i(rx_src_rdy_int), .dst1_rdy_o(rx_dst_rdy_int),
-      .src2_rdy_o(rx_src_rdy), .dst2_rdy_i(rx_dst_rdy),
-      .underrun(), .overrun(rx_overrun));
-
-   wire 	 run_tx, run_rx, strobe_tx, strobe_rx;
-`endif //  `ifdef TIMED
-
-`ifdef DSP
-   wire [7:0] 	 WHOAMI = 0;
-   
    wire [31:0] 	 debug_rx_dsp, vrc_debug, vrf_debug;
    
    // /////////////////////////////////////////////////////////////////////////
@@ -189,7 +142,7 @@ module u1e_core
    vita_rx_control #(.BASE(SR_RX_CTRL), .WIDTH(32)) vita_rx_control
      (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx),
       .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .vita_time(vita_time), .overrun(rx_overrun),
+      .vita_time(vita_time), .overrun(rx_overrun_dsp),
       .sample(sample_rx), .run(run_rx), .strobe(strobe_rx),
       .sample_fifo_o(rx1_data), .sample_fifo_dst_rdy_i(rx1_dst_rdy), .sample_fifo_src_rdy_o(rx1_src_rdy),
       .debug_rx(vrc_debug));
@@ -225,29 +178,12 @@ module u1e_core
       .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
       .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
       .dac_a(tx_i_int),.dac_b(tx_q_int),
-      .underrun(underrun), .run(run_tx),
+      .underrun(tx_underrun_dsp), .run(run_tx),
       .debug(debug_vt));
    
    assign tx_i = tx_i_int[15:2];
    assign tx_q = tx_q_int[15:2];
    
-`else // !`ifdef DSP
-   // Dummy DSP signal generator for test purposes
-   wire [23:0] 	 tx_i_int, tx_q_int;
-   wire [23:0] 	 freq = {reg_test,8'd0};
-   reg [23:0] 	 phase;
-   
-   always @(posedge wb_clk)
-     phase <= phase + freq;
-   
-   cordic_z24 #(.bitwidth(24)) tx_cordic
-     (.clock(wb_clk), .reset(wb_rst), .enable(1),
-      .xi(24'd2500000), .yi(24'd0), .zi(phase), .xo(tx_i_int), .yo(tx_q_int), .zo());
-
-   assign tx_i = tx_i_int[23:10];
-   assign tx_q = tx_q_int[23:10];
-`endif // !`ifdef DSP
-      
    // /////////////////////////////////////////////////////////////////////////////////////
    // Wishbone Intercon, single master
    wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso,
@@ -320,7 +256,6 @@ module u1e_core
    // Slave 0, Misc LEDs, Switches, controls
    
    localparam REG_LEDS = 7'd0;         // out
-   localparam REG_SWITCHES = 7'd2;     // in
    localparam REG_CGEN_CTRL = 7'd4;    // out
    localparam REG_CGEN_ST = 7'd6;      // in
    localparam REG_TEST = 7'd8;         // out
@@ -353,20 +288,18 @@ module u1e_core
 	     xfer_rate <= s0_dat_mosi;
 	 endcase // case (s0_adr[6:0])
 
-   assign tx_enable = xfer_rate[15];
-   assign rx_enable = xfer_rate[14];
-   assign rate = xfer_rate[7:0];
+   assign test_ctrl = xfer_rate[11:8];
+   assign test_rate = xfer_rate[7:0];
    
    assign { debug_led[3:0] } = ~{run_rx,run_tx,reg_leds[1:0]};
    assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl;
    
    assign s0_dat_miso = (s0_adr[6:0] == REG_LEDS) ? reg_leds : 
-			(s0_adr[6:0] == REG_SWITCHES) ? { 16'd0 } :
 			(s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl :
 			(s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} :
 			(s0_adr[6:0] == REG_TEST) ? reg_test :
 			(s0_adr[6:0] == REG_RX_FRAMELEN) ? rx_frame_len :
-			(s0_adr[6:0] == REG_COMPAT) ? { WHOAMI, COMPAT_NUM } :
+			(s0_adr[6:0] == REG_COMPAT) ? { 8'd0, COMPAT_NUM } :
 			16'hBEEF;
    
    assign s0_ack = s0_stb & s0_cyc;
@@ -475,10 +408,14 @@ module u1e_core
 
    assign debug_clk = { EM_CLK, clk_fpga };
 
+/*
    assign debug = { { rx_have_data, tx_have_space, EM_NCS6, EM_NCS5, EM_NCS4, EM_NWE, EM_NOE, rx_overrun },
 		    { tx_src_rdy, tx_src_rdy_int, tx_dst_rdy, tx_dst_rdy_int, rx_src_rdy, rx_src_rdy_int, rx_dst_rdy, rx_dst_rdy_int },
 		    { EM_D } };
 
+*/
+   assign debug = debug_gpmc;
+
    assign debug_gpio_0 = { {run_tx, strobe_tx, run_rx, strobe_rx, tx_i[11:0]}, 
 			   {2'b00, tx_src_rdy, tx_dst_rdy, tx_q[11:0]} };