Merge branch 'ise12_exp' into u1e

* ise12_exp:
  zero out debug pins.  helps timing a little bit.
  non-udp uses a different address for the tx dsp core
  manual merge to use localparams from udp version
  from UDP branch, changed names because I want these separate from the non-udp versions
  ignore output files
  new files from udp branch added to main Makefile
  change the debug pins, which makes it more reliable.  This is unnerving.
  experimental mods to make ram loader fully synchronous.  Based on IJB's work
  fixes from IJB from 5/24.  Basically connect unconnected wires.
  removes the icache and pipelines the reads

2 files changed, 271 insertions, 0 deletions

diff --git a/usrp2/top/u2_rev3/Makefile b/usrp2/top/u2_rev3/Makefile
index af93700c5..541f3264f 100644
--- a/usrp2/top/u2_rev3/Makefile
+++ b/usrp2/top/u2_rev3/Makefile
@@ -66,6 +66,7 @@ control_lib/mux4.v \
 control_lib/mux8.v \
 control_lib/nsgpio.v \
 control_lib/ram_2port.v \
+control_lib/ram_harvard.v \
 control_lib/ram_harv_cache.v \
 control_lib/ram_loader.v \
 control_lib/setting_reg.v \
@@ -193,6 +194,8 @@ timing/time_64bit.v \
 timing/time_compare.v \
 timing/time_receiver.v \
 timing/time_sender.v \
+timing/time_sync.v \
+timing/timer.v \
 timing/simple_timer.v \
 top/u2_core/u2_core.v \
 top/u2_rev3/u2_rev3.ucf \
diff --git a/usrp2/top/u2_rev3/Makefile.udp b/usrp2/top/u2_rev3/Makefile.udp
new file mode 100644
index 000000000..fa94c7bd1
--- /dev/null
+++ b/usrp2/top/u2_rev3/Makefile.udp
@@ -0,0 +1,268 @@
+#
+# Copyright 2008 Ettus Research LLC
+# 
+# This file is part of GNU Radio
+# 
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+# 
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+# 
+
+##################################################
+# xtclsh Shell and tcl Script Path
+##################################################
+#XTCLSH := /opt/Xilinx/10.1/ISE/bin/lin/xtclsh
+XTCLSH := xtclsh
+ISE_HELPER := ../tcl/ise_helper.tcl
+
+##################################################
+# Project Setup
+##################################################
+BUILD_DIR := build-udp/
+export TOP_MODULE := u2_rev3
+export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise
+
+##################################################
+# Project Properties
+##################################################
+export PROJECT_PROPERTIES := \
+family Spartan3 \
+device xc3s2000 \
+package fg456 \
+speed -5 \
+top_level_module_type "HDL" \
+synthesis_tool "XST (VHDL/Verilog)" \
+simulator "ISE Simulator (VHDL/Verilog)" \
+"Preferred Language" "Verilog" \
+"Enable Message Filtering" FALSE \
+"Display Incremental Messages" FALSE 
+
+##################################################
+# Sources
+##################################################
+export SOURCE_ROOT := ../../../
+export SOURCES := \
+control_lib/CRC16_D16.v \
+control_lib/atr_controller.v \
+control_lib/bin2gray.v \
+control_lib/dcache.v \
+control_lib/decoder_3_8.v \
+control_lib/dpram32.v \
+control_lib/gray2bin.v \
+control_lib/gray_send.v \
+control_lib/icache.v \
+control_lib/mux4.v \
+control_lib/mux8.v \
+control_lib/nsgpio.v \
+control_lib/ram_2port.v \
+control_lib/ram_harvard.v \
+control_lib/ram_harv_cache.v \
+control_lib/ram_loader.v \
+control_lib/setting_reg.v \
+control_lib/settings_bus.v \
+control_lib/settings_bus_crossclock.v \
+control_lib/srl.v \
+control_lib/system_control.v \
+control_lib/wb_1master.v \
+control_lib/wb_readback_mux.v \
+control_lib/simple_uart.v \
+control_lib/simple_uart_tx.v \
+control_lib/simple_uart_rx.v \
+control_lib/oneshot_2clk.v \
+control_lib/sd_spi.v \
+control_lib/sd_spi_wb.v \
+control_lib/wb_bridge_16_32.v \
+control_lib/reset_sync.v \
+control_lib/priority_enc.v \
+control_lib/pic.v \
+vrt/vita_rx_control.v \
+vrt/vita_rx_framer.v \
+vrt/vita_tx_control.v \
+vrt/vita_tx_deframer.v \
+udp/udp_wrapper.v \
+udp/fifo19_rxrealign.v \
+udp/prot_eng_tx.v \
+udp/add_onescomp.v \
+simple_gemac/simple_gemac_wrapper.v \
+simple_gemac/simple_gemac_wrapper19.v \
+simple_gemac/simple_gemac.v \
+simple_gemac/simple_gemac_wb.v \
+simple_gemac/simple_gemac_tx.v \
+simple_gemac/simple_gemac_rx.v \
+simple_gemac/crc.v \
+simple_gemac/delay_line.v \
+simple_gemac/flow_ctrl_tx.v \
+simple_gemac/flow_ctrl_rx.v \
+simple_gemac/address_filter.v \
+simple_gemac/ll8_to_txmac.v \
+simple_gemac/rxmac_to_ll8.v \
+simple_gemac/miim/eth_miim.v \
+simple_gemac/miim/eth_clockgen.v \
+simple_gemac/miim/eth_outputcontrol.v \
+simple_gemac/miim/eth_shiftreg.v \
+control_lib/newfifo/buffer_int.v \
+control_lib/newfifo/buffer_pool.v \
+control_lib/newfifo/fifo_2clock.v \
+control_lib/newfifo/fifo_2clock_cascade.v \
+control_lib/newfifo/ll8_shortfifo.v \
+control_lib/newfifo/fifo_short.v \
+control_lib/newfifo/fifo_long.v \
+control_lib/newfifo/fifo_cascade.v \
+control_lib/newfifo/fifo36_to_ll8.v \
+control_lib/newfifo/ll8_to_fifo36.v \
+control_lib/newfifo/fifo19_to_ll8.v \
+control_lib/newfifo/ll8_to_fifo19.v \
+control_lib/newfifo/fifo36_to_fifo19.v \
+control_lib/newfifo/fifo19_to_fifo36.v \
+control_lib/longfifo.v \
+control_lib/shortfifo.v \
+control_lib/medfifo.v \
+coregen/fifo_xlnx_2Kx36_2clk.v \
+coregen/fifo_xlnx_2Kx36_2clk.xco \
+coregen/fifo_xlnx_512x36_2clk.v \
+coregen/fifo_xlnx_512x36_2clk.xco \
+coregen/fifo_xlnx_64x36_2clk.v \
+coregen/fifo_xlnx_64x36_2clk.xco \
+coregen/fifo_xlnx_16x19_2clk.v \
+coregen/fifo_xlnx_16x19_2clk.xco \
+coregen/fifo_xlnx_16x40_2clk.v \
+coregen/fifo_xlnx_16x40_2clk.xco \
+extram/wb_zbt16_b.v \
+opencores/8b10b/decode_8b10b.v \
+opencores/8b10b/encode_8b10b.v \
+opencores/aemb/rtl/verilog/aeMB_bpcu.v \
+opencores/aemb/rtl/verilog/aeMB_core_BE.v \
+opencores/aemb/rtl/verilog/aeMB_ctrl.v \
+opencores/aemb/rtl/verilog/aeMB_edk32.v \
+opencores/aemb/rtl/verilog/aeMB_ibuf.v \
+opencores/aemb/rtl/verilog/aeMB_regf.v \
+opencores/aemb/rtl/verilog/aeMB_xecu.v \
+opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v \
+opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v \
+opencores/i2c/rtl/verilog/i2c_master_defines.v \
+opencores/i2c/rtl/verilog/i2c_master_top.v \
+opencores/i2c/rtl/verilog/timescale.v \
+opencores/spi/rtl/verilog/spi_clgen.v \
+opencores/spi/rtl/verilog/spi_defines.v \
+opencores/spi/rtl/verilog/spi_shift.v \
+opencores/spi/rtl/verilog/spi_top.v \
+opencores/spi/rtl/verilog/timescale.v \
+sdr_lib/acc.v \
+sdr_lib/add2.v \
+sdr_lib/add2_and_round.v \
+sdr_lib/add2_and_round_reg.v \
+sdr_lib/add2_reg.v \
+sdr_lib/cic_dec_shifter.v \
+sdr_lib/cic_decim.v \
+sdr_lib/cic_int_shifter.v \
+sdr_lib/cic_interp.v \
+sdr_lib/cic_strober.v \
+sdr_lib/clip.v \
+sdr_lib/clip_reg.v \
+sdr_lib/cordic.v \
+sdr_lib/cordic_z24.v \
+sdr_lib/cordic_stage.v \
+sdr_lib/dsp_core_rx_udp.v \
+sdr_lib/dsp_core_tx.v \
+sdr_lib/hb_dec.v \
+sdr_lib/hb_interp.v \
+sdr_lib/round.v \
+sdr_lib/round_reg.v \
+sdr_lib/rx_control.v \
+sdr_lib/rx_dcoffset.v \
+sdr_lib/sign_extend.v \
+sdr_lib/small_hb_dec.v \
+sdr_lib/small_hb_int.v \
+sdr_lib/tx_control.v \
+serdes/serdes.v \
+serdes/serdes_fc_rx.v \
+serdes/serdes_fc_tx.v \
+serdes/serdes_rx.v \
+serdes/serdes_tx.v \
+timing/time_64bit.v \
+timing/time_compare.v \
+timing/time_receiver.v \
+timing/time_sender.v \
+timing/time_sync.v \
+timing/timer.v \
+timing/simple_timer.v \
+top/u2_core/u2_core_udp.v \
+top/u2_rev3/u2_rev3.ucf \
+top/u2_rev3/u2_rev3.v 
+
+##################################################
+# Process Properties
+##################################################
+export SYNTHESIZE_PROPERTIES := \
+"Number of Clock Buffers" 8 \
+"Pack I/O Registers into IOBs" Yes \
+"Optimization Effort" High \
+"Optimize Instantiated Primitives" TRUE \
+"Register Balancing" Yes \
+"Use Clock Enable" Auto \
+"Use Synchronous Reset" Auto \
+"Use Synchronous Set" Auto
+
+export TRANSLATE_PROPERTIES := \
+"Macro Search Path" "$(shell pwd)/../../coregen/"
+
+export MAP_PROPERTIES := \
+"Allow Logic Optimization Across Hierarchy" TRUE \
+"Map to Input Functions" 4 \
+"Optimization Strategy (Cover Mode)" Speed \
+"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \
+"Perform Timing-Driven Packing and Placement" TRUE \
+"Map Effort Level" High \
+"Extra Effort" Normal \
+"Combinatorial Logic Optimization" TRUE \
+"Register Duplication" TRUE
+
+export PLACE_ROUTE_PROPERTIES := \
+"Place & Route Effort Level (Overall)" High 
+
+export STATIC_TIMING_PROPERTIES := \
+"Number of Paths in Error/Verbose Report" 10 \
+"Report Type" "Error Report"
+
+export GEN_PROG_FILE_PROPERTIES := \
+"Configuration Rate" 6 \
+"Create Binary Configuration File" TRUE \
+"Done (Output Events)" 5 \
+"Enable Bitstream Compression" TRUE \
+"Enable Outputs (Output Events)" 6 
+
+export SIM_MODEL_PROPERTIES := ""
+
+##################################################
+# Make Options
+##################################################
+all:
+	@echo make proj, check, synth, bin, or clean
+
+proj:
+	PROCESS_RUN="" $(XTCLSH) $(ISE_HELPER)	
+
+check:
+	PROCESS_RUN="Check Syntax" $(XTCLSH) $(ISE_HELPER)	
+
+synth:
+	PROCESS_RUN="Synthesize - XST" $(XTCLSH) $(ISE_HELPER)	
+
+bin:
+	PROCESS_RUN="Generate Programming File" $(XTCLSH) $(ISE_HELPER)		
+
+clean:
+	rm -rf $(BUILD_DIR)
+
+