copied over from other repo. Beginnings of a skeleton fpga image for USRP1-Plus

1 files changed, 232 insertions, 0 deletions

diff --git a/usrp2/top/u1plus/Makefile b/usrp2/top/u1plus/Makefile
new file mode 100644
index 000000000..8a7c7856d
--- /dev/null
+++ b/usrp2/top/u1plus/Makefile
@@ -0,0 +1,232 @@
+#
+# Copyright 2008 Ettus Research LLC
+# 
+# This file is part of GNU Radio
+# 
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+# 
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+# 
+
+##################################################
+# xtclsh Shell and tcl Script Path
+##################################################
+#XTCLSH := /opt/Xilinx/10.1/ISE/bin/lin/xtclsh
+XTCLSH := xtclsh
+ISE_HELPER := ../tcl/ise_helper.tcl
+
+##################################################
+# Project Setup
+##################################################
+BUILD_DIR := build/
+export TOP_MODULE := u1plus
+export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise
+
+##################################################
+# Project Properties
+##################################################
+export PROJECT_PROPERTIES := \
+family "Spartan3A" \
+device XC3S1400A \
+package ft256 \
+speed -4 \
+top_level_module_type "HDL" \
+synthesis_tool "XST (VHDL/Verilog)" \
+simulator "ISE Simulator (VHDL/Verilog)" \
+"Preferred Language" "Verilog" \
+"Enable Message Filtering" FALSE \
+"Display Incremental Messages" FALSE 
+
+##################################################
+# Sources
+##################################################
+export SOURCE_ROOT := ../../../
+export SOURCES := \
+control_lib/CRC16_D16.v \
+control_lib/atr_controller.v \
+control_lib/bin2gray.v \
+control_lib/dcache.v \
+control_lib/decoder_3_8.v \
+control_lib/dpram32.v \
+control_lib/gray2bin.v \
+control_lib/gray_send.v \
+control_lib/icache.v \
+control_lib/mux4.v \
+control_lib/mux8.v \
+control_lib/nsgpio.v \
+control_lib/ram_2port.v \
+control_lib/ram_harv_cache.v \
+control_lib/ram_loader.v \
+control_lib/setting_reg.v \
+control_lib/settings_bus.v \
+control_lib/srl.v \
+control_lib/system_control.v \
+control_lib/wb_1master.v \
+control_lib/wb_readback_mux.v \
+control_lib/simple_uart.v \
+control_lib/simple_uart_tx.v \
+control_lib/simple_uart_rx.v \
+control_lib/oneshot_2clk.v \
+control_lib/sd_spi.v \
+control_lib/sd_spi_wb.v \
+control_lib/wb_bridge_16_32.v \
+control_lib/reset_sync.v \
+control_lib/newfifo/buffer_int.v \
+control_lib/newfifo/buffer_pool.v \
+control_lib/newfifo/fifo_2clock.v \
+control_lib/newfifo/fifo_2clock_cascade.v \
+control_lib/newfifo/ll8_shortfifo.v \
+control_lib/newfifo/ll8_to_fifo36.v \
+control_lib/newfifo/fifo_short.v \
+control_lib/newfifo/fifo_long.v \
+control_lib/newfifo/fifo_cascade.v \
+control_lib/newfifo/fifo36_to_ll8.v \
+control_lib/longfifo.v \
+control_lib/shortfifo.v \
+control_lib/medfifo.v \
+control_lib/priority_enc.v \
+control_lib/pic.v \
+coregen/fifo_xlnx_2Kx36_2clk.v \
+coregen/fifo_xlnx_2Kx36_2clk.xco \
+coregen/fifo_xlnx_512x36_2clk.v \
+coregen/fifo_xlnx_512x36_2clk.xco \
+coregen/fifo_xlnx_64x36_2clk.v \
+coregen/fifo_xlnx_64x36_2clk.xco \
+extram/wb_zbt16_b.v \
+opencores/8b10b/decode_8b10b.v \
+opencores/8b10b/encode_8b10b.v \
+opencores/aemb/rtl/verilog/aeMB_bpcu.v \
+opencores/aemb/rtl/verilog/aeMB_core_BE.v \
+opencores/aemb/rtl/verilog/aeMB_ctrl.v \
+opencores/aemb/rtl/verilog/aeMB_edk32.v \
+opencores/aemb/rtl/verilog/aeMB_ibuf.v \
+opencores/aemb/rtl/verilog/aeMB_regf.v \
+opencores/aemb/rtl/verilog/aeMB_xecu.v \
+opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v \
+opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v \
+opencores/i2c/rtl/verilog/i2c_master_defines.v \
+opencores/i2c/rtl/verilog/i2c_master_top.v \
+opencores/i2c/rtl/verilog/timescale.v \
+opencores/simple_pic/rtl/simple_pic.v \
+opencores/spi/rtl/verilog/spi_clgen.v \
+opencores/spi/rtl/verilog/spi_defines.v \
+opencores/spi/rtl/verilog/spi_shift.v \
+opencores/spi/rtl/verilog/spi_top.v \
+opencores/spi/rtl/verilog/timescale.v \
+sdr_lib/acc.v \
+sdr_lib/add2.v \
+sdr_lib/add2_and_round.v \
+sdr_lib/add2_and_round_reg.v \
+sdr_lib/add2_reg.v \
+sdr_lib/cic_dec_shifter.v \
+sdr_lib/cic_decim.v \
+sdr_lib/cic_int_shifter.v \
+sdr_lib/cic_interp.v \
+sdr_lib/cic_strober.v \
+sdr_lib/clip.v \
+sdr_lib/clip_reg.v \
+sdr_lib/cordic.v \
+sdr_lib/cordic_z24.v \
+sdr_lib/cordic_stage.v \
+sdr_lib/dsp_core_rx.v \
+sdr_lib/dsp_core_tx.v \
+sdr_lib/hb_dec.v \
+sdr_lib/hb_interp.v \
+sdr_lib/round.v \
+sdr_lib/round_reg.v \
+sdr_lib/rx_control.v \
+sdr_lib/rx_dcoffset.v \
+sdr_lib/sign_extend.v \
+sdr_lib/small_hb_dec.v \
+sdr_lib/small_hb_int.v \
+sdr_lib/tx_control.v \
+serdes/serdes.v \
+serdes/serdes_fc_rx.v \
+serdes/serdes_fc_tx.v \
+serdes/serdes_rx.v \
+serdes/serdes_tx.v \
+timing/time_receiver.v \
+timing/time_sender.v \
+timing/time_sync.v \
+timing/timer.v \
+top/u1_core/u1_core.v \
+top/u1plus/u1plus.ucf \
+top/u1plus/timing.ucf \
+top/u1plus/u1plus.v 
+
+##################################################
+# Process Properties
+##################################################
+export SYNTHESIZE_PROPERTIES := \
+"Number of Clock Buffers" 6 \
+"Pack I/O Registers into IOBs" Yes \
+"Optimization Effort" High \
+"Optimize Instantiated Primitives" TRUE \
+"Register Balancing" Yes \
+"Use Clock Enable" Auto \
+"Use Synchronous Reset" Auto \
+"Use Synchronous Set" Auto
+
+export TRANSLATE_PROPERTIES := \
+"Macro Search Path" "$(shell pwd)/../../coregen/"
+
+export MAP_PROPERTIES := \
+"Allow Logic Optimization Across Hierarchy" TRUE \
+"Map to Input Functions" 4 \
+"Optimization Strategy (Cover Mode)" Speed \
+"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \
+"Perform Timing-Driven Packing and Placement" TRUE \
+"Map Effort Level" High \
+"Extra Effort" Normal \
+"Combinatorial Logic Optimization" TRUE \
+"Register Duplication" TRUE
+
+export PLACE_ROUTE_PROPERTIES := \
+"Place & Route Effort Level (Overall)" High 
+
+export STATIC_TIMING_PROPERTIES := \
+"Number of Paths in Error/Verbose Report" 10 \
+"Report Type" "Error Report"
+
+export GEN_PROG_FILE_PROPERTIES := \
+"Configuration Rate" 6 \
+"Create Binary Configuration File" TRUE \
+"Done (Output Events)" 5 \
+"Enable Bitstream Compression" TRUE \
+"Enable Outputs (Output Events)" 6 
+
+export SIM_MODEL_PROPERTIES := ""
+
+##################################################
+# Make Options
+##################################################
+all:
+	@echo make proj, check, synth, bin, or clean
+
+proj:
+	PROCESS_RUN="" $(XTCLSH) $(ISE_HELPER)	
+
+check:
+	PROCESS_RUN="Check Syntax" $(XTCLSH) $(ISE_HELPER)	
+
+synth:
+	PROCESS_RUN="Synthesize - XST" $(XTCLSH) $(ISE_HELPER)	
+
+bin:
+	PROCESS_RUN="Generate Programming File" $(XTCLSH) $(ISE_HELPER)		
+
+clean:
+	rm -rf $(BUILD_DIR)
+
+