e100: tighten timing - less routing on EM_A

There were a few places it was ok to use addr over EM_A.
This makes routing sligtly easier for GPMC signals.

2 files changed, 2 insertions, 2 deletions

diff --git a/usrp2/top/E1x0/core_compile b/usrp2/top/E1x0/core_compile
index dd88094ff..ab992f29d 100755
--- a/usrp2/top/E1x0/core_compile
+++ b/usrp2/top/E1x0/core_compile
@@ -1,3 +1,3 @@
-iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../B100 -y $XILINX/verilog/src/unisims E100.v  2>&1  | grep -v timescale | grep -v coregen | grep -v models
+iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../B100 -y $XILINX/verilog/src/unisims E1x0.v  2>&1  | grep -v timescale | grep -v coregen | grep -v models
 
 
diff --git a/usrp2/top/E1x0/timing.ucf b/usrp2/top/E1x0/timing.ucf
index 6bd559426..7d3d9e090 100644
--- a/usrp2/top/E1x0/timing.ucf
+++ b/usrp2/top/E1x0/timing.ucf
@@ -14,7 +14,7 @@ INST "EM_NCS6" TNM = gpmc_net;
 INST "EM_NWE" TNM = gpmc_net;
 INST "EM_NOE" TNM = gpmc_net;
 
-TIMEGRP "gpmc_net" OFFSET = IN 7 ns VALID 14 ns BEFORE "EM_CLK" FALLING;
+TIMEGRP "gpmc_net" OFFSET = IN 6 ns VALID 12 ns BEFORE "EM_CLK" FALLING;
 TIMEGRP "gpmc_net_out" OFFSET = OUT 14 ns AFTER "EM_CLK" RISING; //2 clock cyc per read
 
 #constrain interrupt lines