Merge branch 'master' into u1e

2 files changed, 31 insertions, 27 deletions

diff --git a/usrp2/sdr_lib/cordic_z24.v b/usrp2/sdr_lib/cordic_z24.v
index cf668d5ec..97b7beaf7 100644
--- a/usrp2/sdr_lib/cordic_z24.v
+++ b/usrp2/sdr_lib/cordic_z24.v
@@ -45,30 +45,30 @@ module cordic_z24(clock, reset, enable, xi, yi, zi, xo, yo, zo );
    // see gen_cordic_consts.py
 
    // constants for 24 bit wide phase
-   localparam 	       c00 = 24'd2097152;
-   localparam 	       c01 = 24'd1238021;
-   localparam 	       c02 = 24'd654136;
-   localparam 	       c03 = 24'd332050;
-   localparam 	       c04 = 24'd166669;
-   localparam 	       c05 = 24'd83416;
-   localparam 	       c06 = 24'd41718;
-   localparam 	       c07 = 24'd20860;
-   localparam 	       c08 = 24'd10430;
-   localparam 	       c09 = 24'd5215;
-   localparam 	       c10 = 24'd2608;
-   localparam 	       c11 = 24'd1304;
-   localparam 	       c12 = 24'd652;
-   localparam 	       c13 = 24'd326;
-   localparam 	       c14 = 24'd163;
-   localparam 	       c15 = 24'd81;
-   localparam 	       c16 = 24'd41;
-   localparam 	       c17 = 24'd20;
-   localparam 	       c18 = 24'd10;
-   localparam 	       c19 = 24'd5;
-   localparam 	       c20 = 24'd3;
-   localparam 	       c21 = 24'd1;
-   localparam 	       c22 = 24'd1;
-   localparam 	       c23 = 24'd0;
+   localparam 	       c00 = 23'd2097152;
+   localparam 	       c01 = 23'd1238021;
+   localparam 	       c02 = 23'd654136;
+   localparam 	       c03 = 23'd332050;
+   localparam 	       c04 = 23'd166669;
+   localparam 	       c05 = 23'd83416;
+   localparam 	       c06 = 23'd41718;
+   localparam 	       c07 = 23'd20860;
+   localparam 	       c08 = 23'd10430;
+   localparam 	       c09 = 23'd5215;
+   localparam 	       c10 = 23'd2608;
+   localparam 	       c11 = 23'd1304;
+   localparam 	       c12 = 23'd652;
+   localparam 	       c13 = 23'd326;
+   localparam 	       c14 = 23'd163;
+   localparam 	       c15 = 23'd81;
+   localparam 	       c16 = 23'd41;
+   localparam 	       c17 = 23'd20;
+   localparam 	       c18 = 23'd10;
+   localparam 	       c19 = 23'd5;
+   localparam 	       c20 = 23'd3;
+   localparam 	       c21 = 23'd1;
+   localparam 	       c22 = 23'd1;
+   localparam 	       c23 = 23'd0;
 
    always @(posedge clock)
      if(reset)
diff --git a/usrp2/sdr_lib/dsp_core_rx.v b/usrp2/sdr_lib/dsp_core_rx.v
index 2ac429630..1e689fc7f 100644
--- a/usrp2/sdr_lib/dsp_core_rx.v
+++ b/usrp2/sdr_lib/dsp_core_rx.v
@@ -32,6 +32,10 @@ module dsp_core_rx
    wire        strobe_cic, strobe_hb1, strobe_hb2;
    wire        enable_hb1, enable_hb2;
    wire [7:0]  cic_decim_rate;
+
+   wire [31:10] UNUSED_1;
+   wire [31:4] 	UNUSED_2;
+   wire [31:2] 	UNUSED_3;
    
    setting_reg #(.my_addr(BASE+0)) sr_0
      (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
@@ -43,7 +47,7 @@ module dsp_core_rx
    
    setting_reg #(.my_addr(BASE+2)) sr_2
      (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out({enable_hb1, enable_hb2, cic_decim_rate}),.changed());
+      .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed());
 
    rx_dcoffset #(.WIDTH(14),.ADDR(BASE+3)) rx_dcoffset_a
      (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
@@ -56,12 +60,12 @@ module dsp_core_rx
    wire [3:0]  muxctrl;
    setting_reg #(.my_addr(BASE+5)) sr_8
      (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(muxctrl),.changed());
+      .in(set_data),.out({UNUSED_2,muxctrl}),.changed());
 
    wire [1:0] gpio_ena;
    setting_reg #(.my_addr(BASE+6)) sr_9
      (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(gpio_ena),.changed());
+      .in(set_data),.out({UNUSED_3,gpio_ena}),.changed());
 
    // The TVRX connects to what is called adc_b, thus A and B are
    // swapped throughout the design.