more progress on synchronous interface

1 files changed, 36 insertions, 25 deletions

diff --git a/usrp2/gpmc/gpmc.v b/usrp2/gpmc/gpmc.v
index 2715414b3..d6a685bba 100644
--- a/usrp2/gpmc/gpmc.v
+++ b/usrp2/gpmc/gpmc.v
@@ -4,7 +4,8 @@ module gpmc
   (// GPMC signals
    input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
    input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE,
-
+   output bus_error,
+   
    // GPIOs for FIFO signalling
    output rx_have_data, output tx_have_space,
    
@@ -17,15 +18,15 @@ module gpmc
    input fifo_clk, input fifo_rst,
    output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i,
    input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o,
-   
+
    output [31:0] debug
    );
 
    wire 	EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6));
-   wire [15:0] 	EM_D_ram;
+   wire [15:0] 	EM_D_fifo;
    wire [15:0] 	EM_D_wb;
 
-   assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_ram : EM_D_wb;
+   assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_fifo : EM_D_wb;
 
    // CS4 is RAM_2PORT for DATA PATH (high-speed data)
    //    Writes go into one RAM, reads come from the other
@@ -37,19 +38,22 @@ module gpmc
    wire [17:0] 	tx18_data, tx18b_data;
    wire 	tx18_src_rdy, tx18_dst_rdy, tx18b_src_rdy, tx18b_dst_rdy;
    wire [15:0] 	tx_fifo_space, tx_frame_len;
-
+   
    assign tx_frame_len = 10;
+   wire 	arst;
    
-   gpmc_to_fifo gpmc_to_fifo
-     (.EM_CLK(EM_CLK), .EM_D(EM_D), .EM_NBE(EM_NBE), .EM_NCS(EM_NCS4), .EM_NWE(EM_NWE),
-      .fifo_clk(fifo_clk), .fifo_rst(fifo_rst),
+   gpmc_to_fifo_sync gpmc_to_fifo_sync
+     (.arst(arst),
+      .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_NBE(EM_NBE), .EM_NCS(EM_NCS4), .EM_NWE(EM_NWE),
       .data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy),
-      .frame_len(tx_frame_len), .fifo_space(tx_fifo_space), .fifo_ready(tx_have_space));
+      .frame_len(tx_frame_len), .fifo_space(tx_fifo_space), .fifo_ready(tx_have_space),
+      .bus_error(bus_error) );
    
-   fifo_cascade #(.WIDTH(18), .SIZE(10)) tx_fifo
-     (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
-      .datain(tx18_data), .src_rdy_i(tx18_src_rdy), .dst_rdy_o(tx18_dst_rdy), .space(tx_fifo_space),
-      .dataout(tx18b_data), .src_rdy_o(tx18b_src_rdy), .dst_rdy_i(tx18b_dst_rdy));
+   fifo_2clock_cascade #(.WIDTH(18), .SIZE(10)) tx_fifo
+     (.wclk(EM_CLK), .datain(tx18_data), 
+      .src_rdy_i(tx18_src_rdy), .dst_rdy_o(tx18_dst_rdy), .space(tx_fifo_space),
+      .rclk(fifo_clk), .dataout(tx18b_data), 
+      .src_rdy_o(tx18b_src_rdy), .dst_rdy_i(tx18b_dst_rdy), .occupied(), .arst(arst));
 
    fifo19_to_fifo36 f19_to_f36
      (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
@@ -59,21 +63,28 @@ module gpmc
 
    // ////////////////////////////////////////////
    // RX Data Path
-   wire 	read_sel_rx, write_sel_rx, clear_rx;
-   wire 	read_done_rx;
-      
-   edge_sync #(.POSEDGE(0)) 
-   edge_sync_rx(.clk(wb_clk), .rst(wb_rst), 
-		.sig(~EM_NCS4 & ~EM_NOE & (EM_A == 10'h3FF)), .trig(read_done_rx));
+
+   wire [17:0] 	rx18_data, rx18b_data;
+   wire 	rx18_src_rdy, rx18_dst_rdy, rx18b_src_rdy, rx18b_dst_rdy;
+   wire [15:0] 	rx_fifo_space, rx_frame_len;
    
-   ram_2port_mixed_width buffer_rx
-     (.clk16(wb_clk), .en16(~EM_NCS4), .we16(0), .addr16({read_sel_rx,EM_A}), .di16(0), .do16(EM_D_ram),
-      .clk32(ram_clk), .en32(write_en), .we32(write_en), .addr32({write_sel_rx,write_addr}), .di32(write_data), .do32());
+   fifo36_to_fifo18 f18_to_f36
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
+      .f36_datain(rx_data_i), .f36_src_rdy_i(rx_src_rdy_i), .f36_dst_rdy_o(rx_dst_rdy_o),
+      .f18_dataout(rx18_data), .f18_src_rdy_o(rx18_src_rdy), .f18_dst_rdy_i(rx18_dst_rdy) );
 
-   dbsm dbsm_rx(.clk(wb_clk), .reset(wb_rst), .clear(clear_rx),
-		 .read_sel(read_sel_rx), .read_ready(rx_have_data), .read_done(read_done_rx),
-		 .write_sel(write_sel_rx), .write_ready(write_ready), .write_done(write_done));
+   fifo_2clock_cascade #(.WIDTH(18), .SIZE(10)) rx_fifo
+     (.wclk(fifo_clk), .datain(rx18_data), 
+      .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy), .space(rx_fifo_space),
+      .rclk(EM_CLK), .dataout(rx18b_data), 
+      .src_rdy_o(tx18b_src_rdy), .dst_rdy_i(tx18b_dst_rdy), .occupied(), .arst(arst));
 
+   fifo_to_gpmc_sync fifo_to_gpmc_sync
+     (.arst(arst),
+      .data_i(tx18b_data), .src_rdy_i(tx18b_src_rdy), .dst_rdy_o(tx18b_dst_rdy),
+      .EM_CLK(EM_CLK), .EM_D(EM_D_fifo), .EM_NCS(EM_NCS4), .EM_NOE(EM_NOE),
+      .fifo_ready(rx_have_data) );
+   
    // ////////////////////////////////////////////
    // Control path on CS6