u1p: added loopback and timed capability just like u1e

1 files changed, 91 insertions, 19 deletions

diff --git a/usrp2/gpif/gpif.v b/usrp2/gpif/gpif.v
index 14ed2690f..e72490b17 100644
--- a/usrp2/gpif/gpif.v
+++ b/usrp2/gpif/gpif.v
@@ -17,7 +17,9 @@ module gpif
     input fifo_clk, input fifo_rst, input clear_tx, input clear_rx,
     output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i,
     input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o,
-    
+
+    output tx_underrun, output rx_overrun,
+    input [7:0] test_rate, input [3:0] test_ctrl,
     output [31:0] debug0, output [31:0] debug1
     );
 
@@ -38,12 +40,12 @@ module gpif
    wire [31:0] 	  debug_rd, debug_wr;
    
    // ////////////////////////////////////////////////////////////////////
-   // TX Side
-   
+   // TX Data Path
+
    wire [18:0] 	  tx19_data;
    wire 	  tx19_src_rdy, tx19_dst_rdy;
-   wire [35:0] 	  tx36_data;
-   wire 	  tx36_src_rdy, tx36_dst_rdy;
+   wire [35:0] 	  tx36_data, tx_data;
+   wire 	  tx36_src_rdy, tx36_dst_rdy, tx_src_rdy, tx_dst_rdy;
 
    wire [18:0] 	  ctrl_data;
    wire 	  ctrl_src_rdy, ctrl_dst_rdy;
@@ -64,27 +66,27 @@ module gpif
       .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy));
    
    fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36
-     (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
       .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy),
-      .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i));
+      .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy));
 
-   // ////////////////////////////////////////////////////////////////////
-   // RX Side
+   // ////////////////////////////////////////////
+   // RX Data Path
 
-   wire [35:0] 	  rx36_data;
-   wire 	  rx36_src_rdy, rx36_dst_rdy;
+   wire [35:0] 	  rx36_data, rx_data;
+   wire 	  rx36_src_rdy, rx36_dst_rdy, rx_src_rdy, rx_dst_rdy;
    wire [18:0] 	  rx19_data;
    wire 	  rx19_src_rdy, rx19_dst_rdy;
    wire [18:0] 	  resp_data, resp_int;
    wire 	  resp_src_rdy, resp_dst_rdy, resp_src_rdy_int, resp_dst_rdy_int;
    
    fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_fifo36
-     (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
-      .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o),
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy),
       .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy));
 
    fifo36_to_fifo19 #(.LE(1)) f36_to_f19   // FIXME Endianness?
-     (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
       .f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy),
       .f19_dataout(rx19_data), .f19_src_rdy_o(rx19_src_rdy), .f19_dst_rdy_i(rx19_dst_rdy) );
 
@@ -115,14 +117,84 @@ module gpif
       .data_i(resp_int), .src_rdy_i(resp_src_rdy_int), .dst_rdy_o(resp_dst_rdy_int),
       .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy));
         
+   // ////////////////////////////////////////////////////////////////////
+   // Debug support, timed and loopback
+   // RX side muxes test data into the same stream
+   wire [35:0] 	timedrx_data, loopbackrx_data, testrx_data;
+   wire [35:0] 	timedtx_data, loopbacktx_data, testtx_data;
+   wire 	timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy,
+		testrx_src_rdy, testrx_dst_rdy;
+   wire 	timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy,
+		testtx_src_rdy, testtx_dst_rdy;
+   wire 	timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int;
+
+   wire [31:0] 	total, crc_err, seq_err, len_err;
+   wire 	sel_testtx = test_ctrl[0];
+   wire 	sel_loopbacktx = test_ctrl[1];
+   wire 	pkt_src_enable = test_ctrl[2];
+   wire 	pkt_sink_enable = test_ctrl[3];
+   
+   fifo36_mux rx_test_mux_lvl_1
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy),
+      .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy),
+      .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy));
+   
+   fifo36_mux rx_test_mux_lvl_2
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy),
+      .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o),
+      .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
+   
+   fifo_short #(.WIDTH(36)) loopback_fifo
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx),
+      .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy),
+      .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy));
+   
+   // Crossbar used as a demux for switching TX stream to main DSP or to test logic
+   crossbar36 tx_crossbar_lvl_1
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .cross(sel_testtx),
+      .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy),
+      .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(),  // No 2nd input
+      .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i),
+      .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) );
+   
+   crossbar36 tx_crossbar_lvl_2
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .cross(sel_loopbacktx),
+      .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy),
+      .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(),  // No 2nd input
+      .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy),
+      .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) );
+   
+   // Fixed rate TX traffic consumer
+   fifo_pacer tx_pacer
+     (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable),
+      .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy),
+      .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int),
+      .underrun(tx_underrun), .overrun());
+
+   packet_verifier32 pktver32
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+      .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int),
+      .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err));
+
+   // Fixed rate RX traffic generator
+   packet_generator32 pktgen32
+     (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+      .header({len_err,seq_err,crc_err,total}),
+      .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int));
+
+   fifo_pacer rx_pacer
+     (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable),
+      .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int),
+      .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy),
+      .underrun(), .overrun(rx_overrun));
+
    // ////////////////////////////////////////////
    //    DEBUG
    
-   // Loopback for testing
-   //assign resp_data = ctrl_data;
-   //assign resp_src_rdy = ctrl_src_rdy;
-   //assign ctrl_dst_rdy = resp_dst_rdy;
-   
    assign debug0 = { 5'd0, gpif_misc[2:0], gpif_ctl[3:0], gpif_rdy[3:0], gpif_d_copy[15:0] };
    assign debug1 = { { debug_rd[15:8] },
 		     { debug_rd[7:0] },