all: removed old unused fifos

6 files changed, 0 insertions, 846 deletions

diff --git a/usrp2/extramfifo/fifo_extram.v b/usrp2/extramfifo/fifo_extram.v
deleted file mode 100644
index 4e1f40371..000000000
--- a/usrp2/extramfifo/fifo_extram.v
+++ /dev/null
@@ -1,188 +0,0 @@
-
-// Everything on sram_clk
-
-module fifo_extram
-  (input reset, input clear,
-   input [17:0] datain, input src_rdy_i, output dst_rdy_o, output [15:0] space, input [15:0] occ_in,
-   output [17:0] dataout, output src_rdy_o, input dst_rdy_i, output [15:0] occupied, input [15:0] space_in,
-   input sram_clk, output [18:0] sram_a, inout [17:0] sram_d, output sram_we,
-   output [1:0] sram_bw, output sram_adv, output sram_ce, output sram_oe, 
-   output sram_mode, output sram_zz);
-
-   localparam AWIDTH   = 19; // 1 MB in x18
-   localparam RAMSIZE  = ((1<<AWIDTH) - 1);
-
-   wire   do_store, do_retrieve;
-   reg [1:0]  do_store_del, do_retr_del;
-   
-   reg [AWIDTH-1:0] addr_retrieve, addr_store;
-   always @(posedge sram_clk)
-     if(reset | clear)
-       addr_retrieve <= 0;
-     else if (do_retrieve)
-       addr_retrieve <= addr_retrieve + 1;
-   
-   always @(posedge sram_clk)
-     if(reset | clear)
-       addr_store    <= 0;
-     else if(do_store)
-       addr_store    <= addr_store + 1;
-
-   //wire [AWIDTH-1:0] fullness = (addr_store - addr_retrieve);
-   reg [AWIDTH-1:0] fullness;
-   always @(posedge sram_clk)
-     if(reset | clear)
-       fullness      <= 0;
-     else if(do_store)
-       fullness      <= fullness + 1;
-     else if(do_retrieve)
-       fullness      <= fullness - 1;
-   
-   //   wire        empty  = (fullness == 0);
-   //wire        full   = (fullness == RAMSIZE); // 19'h7FF);
-   reg 		    empty, full;
-   
-   //  The math in the following functions is 'AWIDTH wide.  Use
-   //  continuous assignments to prevent the numbers from being
-   //  promoted to 32-bit (which would make it wrap wrong).
-   //
-   wire [AWIDTH-1:0] addr_retrieve_p1, addr_store_p2;
-   assign addr_retrieve_p1 = addr_retrieve + 1;
-   assign addr_store_p2 = addr_store + 2;
-
-   always @(posedge sram_clk)
-     if(reset | clear)
-       empty 	     <= 1;
-     else if(do_store)
-       empty 	     <= 0;
-     else if(do_retrieve & (/*(addr_retrieve + 1)*/ addr_retrieve_p1 == addr_store))
-       empty 	     <= 1;
-   
-   always @(posedge sram_clk)
-     if(reset | clear)
-       full 	     <= 0;
-     else if(do_retrieve)
-       full 	     <= 0;
-     else if(do_store & (/*(addr_store+2)*/ addr_store_p2 == addr_retrieve))
-       full <= 1;
-
-   reg 	       can_store;
-   always @*
-     if(full | ~src_rdy_i)
-       can_store 	  <= 0;
-     else if(do_store_del == 0)
-       can_store 	  <= 1;
-     else if((do_store_del == 1) || (do_store_del == 2))
-       can_store 	  <= (occ_in > 1);
-     else
-       can_store 	  <= (occ_in > 2);
-     
-   reg 	       can_retrieve;
-   always @*
-     if(empty | ~dst_rdy_i)
-       can_retrieve 	     <= 0;
-     else if(do_retr_del == 0)
-       can_retrieve 	     <= 1;
-     else if((do_retr_del == 1) || (do_retr_del == 2))
-       can_retrieve 	     <= (space_in > 1);
-     else
-       can_retrieve 	     <= (space_in > 2);
-   
-   reg [1:0]  state;
-   localparam IDLE_STORE_NEXT  = 0;
-   localparam STORE 	       = 1;
-   localparam IDLE_RETR_NEXT   = 2;
-   localparam RETRIEVE 	       = 3;
-   
-   reg [7:0]  countdown;
-   wire       countdown_done 		   = (countdown == 0);
-
-   localparam CYCLE_SIZE 		   = 6;
-   
-   assign        do_store 		   = can_store & (state == STORE);
-   assign        do_retrieve 		   = can_retrieve & (state == RETRIEVE);
-   always @(posedge sram_clk)
-     if(reset)
-       do_store_del 			  <= 0;
-     else
-       do_store_del 			  <= {do_store_del[0],do_store};
-   
-   always @(posedge sram_clk) 
-     if(reset)
-       do_retr_del <= 0;
-     else
-       do_retr_del <= {do_retr_del[0],do_retrieve};
-
-   always @(posedge sram_clk)
-     if(reset | clear)
-       begin
-	  state 			  <= IDLE_STORE_NEXT;
-	  countdown 			  <= 0;
-       end
-     else
-       case(state)
-	 IDLE_STORE_NEXT :
-	   if(can_store)
-	     begin
-		state 	  <= STORE;
-		countdown <= CYCLE_SIZE;
-	     end
-	   else if(can_retrieve)
-	     begin
-		state 	  <= RETRIEVE;
-		countdown <= CYCLE_SIZE;
-	     end
-	 STORE :
-	   if(~can_store | (can_retrieve & countdown_done))
-	     state <= IDLE_RETR_NEXT;
-	   else if(~countdown_done)
-	     countdown <= countdown - 1;
-	 IDLE_RETR_NEXT :
-	   if(can_retrieve)
-	     begin
-		state 	  <= RETRIEVE;
-		countdown <= CYCLE_SIZE;
-	     end
-	   else if(can_store)
-	     begin
-		state 	  <= STORE;
-		countdown <= CYCLE_SIZE;
-	     end
-	 RETRIEVE :
-	   if(~can_retrieve | (can_store & countdown_done))
-	     state <= IDLE_STORE_NEXT;
-	   else if(~countdown_done)
-	     countdown <= countdown - 1;
-       endcase // case (state)
-
-   // RAM wires
-   assign sram_bw      = 0;
-   assign sram_adv     = 0;
-   assign sram_mode    = 0;
-   assign sram_zz      = 0;
-   assign sram_ce      = 0;
-
-   assign sram_a       = (state==STORE) ? addr_store : addr_retrieve;
-   assign sram_we      = ~do_store;
-   assign sram_oe      = ~do_retr_del[1];
-   assign my_oe        = do_store_del[1] & sram_oe;
-   assign sram_d       = my_oe ? datain : 18'bz;
-   
-   // FIFO wires
-   assign dataout      = sram_d;
-   assign src_rdy_o    = do_retr_del[1];
-   assign dst_rdy_o    = do_store_del[1];
-   
-endmodule // fifo_extram
-
-
-   //wire        have_1 		   = (fullness == 1);
-   //wire        have_2 		   = (fullness == 2);
-   //wire        have_atleast_1 	   = ~empty;
-   //wire        have_atleast_2 	   = ~(empty | have_1);
-   //wire        have_atleast_3 	   = ~(empty | have_1 | have_2);   
-   //wire        full_minus_1 	   = (fullness == (RAMSIZE-1)); // 19'h7FE);
-   //wire        full_minus_2 	   = (fullness == (RAMSIZE-2)); // 19'h7FD);
-   //wire        spacefor_atleast_1  = ~full;
-   //wire        spacefor_atleast_2  = ~(full | full_minus_1);
-   //wire        spacefor_atleast_3  = ~(full | full_minus_1 | full_minus_2);
diff --git a/usrp2/extramfifo/fifo_extram36.v b/usrp2/extramfifo/fifo_extram36.v
deleted file mode 100644
index 29342fdc4..000000000
--- a/usrp2/extramfifo/fifo_extram36.v
+++ /dev/null
@@ -1,47 +0,0 @@
-
-// 18 bit interface means we either can't handle errors or can't handle odd lengths
-//   unless we go to heroic measures
-
-module fifo_extram36
-  (input clk, input reset, input clear,
-   input [35:0] datain, input src_rdy_i, output dst_rdy_o, output [15:0] space,
-   output [35:0] dataout, output src_rdy_o, input dst_rdy_i, output [15:0] occupied,
-   input sram_clk, output [18:0] sram_a, inout [17:0] sram_d, output sram_we,
-   output [1:0] sram_bw, output sram_adv, output sram_ce, output sram_oe, output sram_mode,
-   output sram_zz);
-
-   wire [17:0] f18_data_1, f18_data_2, f18_data_3, f18_data_4;
-   wire        f18_src_rdy_1, f18_dst_rdy_1, f18_src_rdy_2, f18_dst_rdy_2;
-   wire        f18_src_rdy_3, f18_dst_rdy_3, f18_src_rdy_4, f18_dst_rdy_4;
-   
-   fifo36_to_fifo18 f36_to_f18
-     (.clk(clk), .reset(reset), .clear(clear),
-      .f36_datain(datain), .f36_src_rdy_i(src_rdy_i), .f36_dst_rdy_o(dst_rdy_o),
-      .f18_dataout(f18_data_1), .f18_src_rdy_o(f18_src_rdy_1), .f18_dst_rdy_i(f18_dst_rdy_1) );
-
-   wire [15:0] f1_occ, f2_space;
-   
-   fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) fifo_2clock_in
-     (.wclk(clk), .datain(f18_data_1), .src_rdy_i(f18_src_rdy_1), .dst_rdy_o(f18_dst_rdy_1), .space(),
-      .rclk(sram_clk), .dataout(f18_data_2), .src_rdy_o(f18_src_rdy_2), .dst_rdy_i(f18_dst_rdy_2), .short_occupied(f1_occ),
-      .arst(reset) );
-
-   fifo_extram fifo_extram
-     (.reset(reset), .clear(clear),
-      .datain(f18_data_2), .src_rdy_i(f18_src_rdy_2), .dst_rdy_o(f18_dst_rdy_2), .space(), .occ_in(f1_occ),
-      .dataout(f18_data_3), .src_rdy_o(f18_src_rdy_3), .dst_rdy_i(f18_dst_rdy_3), .occupied(), .space_in(f2_space),
-      .sram_clk(sram_clk), .sram_a(sram_a), .sram_d(sram_d), .sram_we(sram_we),
-      .sram_bw(sram_bw), .sram_adv(sram_adv), .sram_ce(sram_ce), .sram_oe(sram_oe),
-      .sram_mode(sram_mode), .sram_zz(sram_zz));
-   
-   fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) fifo_2clock_out
-     (.wclk(sram_clk), .datain(f18_data_3), .src_rdy_i(f18_src_rdy_3), .dst_rdy_o(f18_dst_rdy_3), .short_space(f2_space),
-      .rclk(clk), .dataout(f18_data_4), .src_rdy_o(f18_src_rdy_4), .dst_rdy_i(f18_dst_rdy_4), .occupied(),
-      .arst(reset) );
-
-   fifo18_to_fifo36 f18_to_f36
-     (.clk(clk), .reset(reset), .clear(clear),
-      .f18_datain(f18_data_4), .f18_src_rdy_i(f18_src_rdy_4), .f18_dst_rdy_o(f18_dst_rdy_4),
-      .f36_dataout(dataout), .f36_src_rdy_o(src_rdy_o), .f36_dst_rdy_i(dst_rdy_i) );
-   
-endmodule // fifo_extram36
diff --git a/usrp2/extramfifo/fifo_extram36_tb.build b/usrp2/extramfifo/fifo_extram36_tb.build
deleted file mode 100755
index ac9369758..000000000
--- a/usrp2/extramfifo/fifo_extram36_tb.build
+++ /dev/null
@@ -1 +0,0 @@
-iverilog -y ../models -y . -y ../control_lib/ -y ../coregen -y ../fifo -y /opt/Xilinx/10.1/ISE/verilog/src/XilinxCoreLib -y /opt/Xilinx/10.1/ISE/verilog/src/unisims/ -o fifo_extram36_tb fifo_extram36_tb.v
diff --git a/usrp2/extramfifo/fifo_extram36_tb.v b/usrp2/extramfifo/fifo_extram36_tb.v
deleted file mode 100644
index e5f8cef4c..000000000
--- a/usrp2/extramfifo/fifo_extram36_tb.v
+++ /dev/null
@@ -1,475 +0,0 @@
-`timescale 1ns/1ns
-
-module fifo_extram36_tb();
-   
-   reg clk 	 = 0;
-   reg sram_clk  = 0;
-   reg rst 	 = 1;
-   reg clear 	 = 0;
-
-   reg Verbose = 0;   // 
-   integer ErrorCount = 0;
-   
-   initial #1000 rst = 0;
-//   always #125 clk = ~clk;
-   task task_CLK;
-      reg [7:0] ran;
-      begin
-	 while (1) begin
-	    ran = $random;
-	    if (ran[1])
-	      #62 clk = ~clk;
-	    else
-	      #63 clk = !clk;
-	 end
-      end
-   endtask // task_CLK
-   initial task_CLK;
-   
-//   always #100 sram_clk = ~sram_clk;
-   task task_SSRAM_clk;
-      reg [7:0] ran;
-      begin
-	 while (1) begin
-	    ran = $random;
-	    if (ran[0])
-	      #49 sram_clk = ~sram_clk;
-	    else
-	      #51 sram_clk = ~sram_clk;
-	 end
-      end
-   endtask // task_SSRAM_clk
-   initial task_SSRAM_clk;
-
-   reg [31:0] f36_data = 32'hX;
-   reg [1:0]  f36_occ = 0;
-   reg 	      f36_sof = 0, f36_eof = 0;
-   
-   wire [35:0] f36_in = {1'b0,f36_occ,f36_eof,f36_sof,f36_data};
-   reg 	       src_rdy_f36i  = 0;
-   wire        dst_rdy_f36i;
-
-   wire [35:0] f36_out;
-   wire        src_rdy_f36o;
-   reg 	       dst_rdy_f36o  = 0;
-
-   wire [17:0] sram_d;
-   wire [18:0] sram_a;
-   wire [1:0]  sram_bw;
-   wire        sram_we, sram_adv, sram_ce, sram_oe, sram_mode, sram_zz;
-
-   reg [31:0]  ScoreBoard [524288:0];
-   reg [18:0] put_index = 0;
-   reg [18:0] get_index = 0;
-   
-//   integer     put_index = 0;
-//   integer     get_index = 0;
-   
-   wire [15:0] DUT_space, DUT_occupied;
-
-   fifo_extram36 fifo_extram36
-     (.clk(clk), .reset(rst), .clear(clear),
-      .datain(f36_in), .src_rdy_i(src_rdy_f36i), .dst_rdy_o(dst_rdy_f36i), .space(DUT_space),
-      .dataout(f36_out), .src_rdy_o(src_rdy_f36o), .dst_rdy_i(dst_rdy_f36o), .occupied(DUT_occupied),
-      .sram_clk(sram_clk), .sram_a(sram_a), .sram_d(sram_d), .sram_we(sram_we),
-      .sram_bw(sram_bw), .sram_adv(sram_adv), .sram_ce(sram_ce), .sram_oe(sram_oe),
-      .sram_mode(sram_mode), .sram_zz(sram_zz));
-
-`define idt 1
-`ifdef idt
-   wire [15:0] dummy16;
-   wire [1:0]  dummy2;
-   
-   idt71v65603s150 
-     ram_model(.A(sram_a[17:0]),
-	       .adv_ld_(sram_adv),                  // advance (high) / load (low)
-               .bw1_(0), .bw2_(0), .bw3_(0), .bw4_(0),   // byte write enables (low)
-               .ce1_(0), .ce2(1), .ce2_(0),          // chip enables
-               .cen_(sram_ce),                     // clock enable (low)
-	       .clk(sram_clk),                      // clock
-	       .IO({dummy16,sram_d[15:0]}), 
-	       .IOP({dummy2,sram_d[17:16]}),                  // data bus
-               .lbo_(sram_mode),                     // linear burst order (low)
-               .oe_(sram_oe),                      // output enable (low)
-               .r_w_(sram_we));                    // read (high) / write (low)
-`else 
-   cy1356 ram_model(.d(sram_d),.clk(~sram_clk),.a(sram_a),
-		    .bws(2'b00),.we_b(sram_we),.adv_lb(sram_adv),
-		    .ce1b(0),.ce2(1),.ce3b(0),
-		    .oeb(sram_oe),.cenb(sram_ce),.mode(sram_mode) );
-`endif
-
-   task task_SSRAMMonitor;
-      reg last_mode;
-      reg last_clock;
-      reg last_load;
-      reg [18:0] sram_addr;
-
-      begin
-	 last_mode = 1'bX;
-	 last_clock = 1'bX;
-	 last_load = 1'bX;
-
-	 @ (posedge Verbose);
-	 $dumpvars(0,fifo_extram36_tb);
-	 
-	 $display("%t:%m\t*** Task Started",$time);
-	 while (1) @ (posedge sram_clk) begin
-	    if (sram_mode !== last_mode) begin
-	       $display("%t:%m\tSSRAM mode:         %b",$time,sram_mode);
-	       last_mode = sram_mode;
-	    end
-	    if (sram_adv !== last_load) begin
-	       $display("%t:%m\tSSRAM adv/load:     %b",$time,sram_adv);
-	       last_load = sram_adv;
-	    end
-	    if (sram_ce !== last_clock) begin
-	       $display("%t:%m\tSSRAM clock enable: %b",$time,sram_ce);
-	       last_clock = sram_ce;
-	    end
-	    if (sram_ce == 1'b0) begin
-	       if (sram_adv == 1'b0) begin
-//		  $display("%t:%m\tSSRAM Address Load A=%h",$time,sram_a);
-		  sram_addr = sram_a;
-	       end else begin
-		  sram_addr = sram_addr + 1;
-	       end
-	       if (sram_oe == 1'b0) begin
-		  $display("%t:%m\tSSRAM Read  Cycle A=%h(%h), D=%o",$time,sram_addr-2,sram_a,sram_d);
-	       end
-	       if (sram_we == 1'b0) begin
-		  $display("%t:%m\tSSRAM Write Cycle A=%h(%h), D=%o",$time,sram_addr-2,sram_a,sram_d);
-	       end
-	       if ((sram_we == 1'b0) && (sram_oe == 1'b0)) begin
-		 $display("%t:%m\t*** ERROR: _oe and _we both active",$time);
-	       end
-	       
-	    end // if (sram_ce == 1'b0)
-	    
-	 end // always @ (posedge sram_clk)
-      end
-   endtask // task_SSRAMMonitor
-   
-   task ReadFromFIFO36;
-      begin
-	 $display("%t: Read from FIFO36",$time);
-	 #1 dst_rdy_f36o <= 1;
-	 while(1)
-	   begin
-	      while(~src_rdy_f36o)
-		@(posedge clk);
-	      $display("%t: Read: %h>",$time,f36_out);
-	      @(posedge clk);
-	   end
-      end
-   endtask // ReadFromFIFO36
-
-   initial dst_rdy_f36o = 0;
-
-   task task_ReadFIFO36;
-      reg [7:0] ran;
-      begin
-      $display("%t:%m\t*** Task Started",$time);
-      while (1) begin
-	 //  Read on one of four clocks
-	 #5 dst_rdy_f36o <= 1;
-	 @(posedge clk);
-	 if (src_rdy_f36o) begin
-	    if (f36_out[31:0] != ScoreBoard[get_index]) begin
-	       $display("%t:%m\tFIFO Get Error: R:%h, E:%h (%h)",$time,f36_out[31:0],ScoreBoard[get_index],get_index);
-	       ErrorCount = ErrorCount + 1;
-	    end else begin
-	       if (Verbose)
-		 $display("%t:%m\t(%5h) %o>",$time,get_index,f36_out);
-	    end
-	    get_index = get_index+1;
-	 end else begin
-	    if (ErrorCount >= 192)
-	      $finish;
-	 end // else: !if(src_rdy_f36o)
-	 
-	 #10;
-	 ran = $random;
-	 if (ran[2:0] != 3'b000) begin
-	    dst_rdy_f36o <= 0;
-	    if (ran[2] != 1'b0) begin
-	       @(posedge clk);
-	       @(posedge clk);
-	       @(posedge clk);
-	    end
-	    if (ran[1] != 1'b0) begin
-	       @(posedge clk);
-	       @(posedge clk);
-	    end
-	    if (ran[0] != 1'b0) begin
-	       @(posedge clk);
-	    end
-	 end
-      end // while (1)
-   end
-      
-   endtask // task_ReadFIFO36
-   
-
-   reg [15:0] count;
-   
-   task PutPacketInFIFO36;
-      input [31:0] data_start;
-      input [31:0] data_len;
-
-      begin
-	 count 	      = 4;
-	 src_rdy_f36i = 1;
-	 f36_data     = data_start;
-	 f36_sof      = 1;
-	 f36_eof      = 0;
-	 f36_occ      = 0;
-	
-	 $display("%t: Put Packet in FIFO36",$time);
-	 while(~dst_rdy_f36i)
-	   #1; //@(posedge clk);
-	 @(posedge clk);
-
-	 $display("%t: <%h PPI_FIFO36: Entered First Line",$time,f36_data);
-	 f36_sof <= 0;
-	 while(count+4 < data_len)
-	   begin
-	      f36_data = f36_data + 32'h01010101;
-	      count    = count + 4;
-	      while(~dst_rdy_f36i)
-		#1; //@(posedge clk);
-	      @(posedge clk);
-	      $display("%t: <%h PPI_FIFO36: Entered New Line",$time,f36_data);
-	   end
-	 f36_data  <= f36_data + 32'h01010101;
-	 f36_eof   <= 1;
-	 if(count + 4 == data_len)
-	   f36_occ <= 0;
-	 else if(count + 3 == data_len)
-	   f36_occ <= 3;
-	 else if(count + 2 == data_len)
-	   f36_occ <= 2;
-	 else
-	   f36_occ <= 1;
-	 while(~dst_rdy_f36i)
-	   @(posedge clk);
-	 @(posedge clk);
-	 f36_occ      <= 0;
-	 f36_eof      <= 0;
-	 f36_data     <= 0;
-	 src_rdy_f36i <= 0;
-	 $display("%t: <%h PPI_FIFO36: Entered Last Line",$time,f36_data);
-      end
-   endtask // PutPacketInFIFO36
-
-   task task_WriteFIFO36;
-      integer i;
-      reg [7:0] ran;
-      
-      begin
-	 f36_data = 32'bX;
-	 if (rst != 1'b0)
-	   @ (negedge rst);
-	 $display("%t:%m\t*** Task Started",$time);
-	 #10;
-	 src_rdy_f36i = 1;
-	 f36_data = $random;
-	 for (i=0; i<64; i=i+0 ) begin
-	    @ (posedge clk) ;
-	    if (dst_rdy_f36i) begin
-	       if (Verbose)
-		 $display("%t:%m\t(%5h) %o<",$time,put_index,f36_in);
-	       ScoreBoard[put_index] = f36_in[31:0];
-	       put_index = put_index + 1;
-	       #5;
-	       f36_data = $random;
-	       i = i + 1;
-	    end
-	    ran = $random;
-	    if (ran[1:0] != 2'b00) begin
-	       @ (negedge clk);
-	       src_rdy_f36i = 0;
-	       #5;
-	       @ (negedge clk) ;
-	       src_rdy_f36i = 1;
-	    end
-	 end
-	 src_rdy_f36i = 0;
-	 f36_data = 32'bX;
-//	 if (put_index > 19'h3ff00)
-//	   Verbose = 1'b1;
-	 
-      end
-   endtask // task_WriteFIFO36
-   
-   initial $dumpfile("fifo_extram36_tb.vcd");
-//   initial $dumpvars(0,fifo_extram36_tb);
-   initial $timeformat(-9, 0, " ns", 10);
-   initial task_SSRAMMonitor;
-   
-   initial
-     begin
-	@(negedge rst);
-	#40000;
-	@(posedge clk);
-	@(posedge clk);
-	@(posedge clk);
-	@(posedge clk);
-//	ReadFromFIFO36;
-	task_ReadFIFO36;
-	
-     end
-
-   integer i;
-   
-   initial
-     begin
-	@(negedge rst);
-	@(posedge clk);
-	@(posedge clk);
-	@(posedge clk);
-	task_WriteFIFO36;
-	@(posedge clk);
-	@(posedge clk);
-	@(posedge clk);
-//	PutPacketInFIFO36(32'hA0B0C0D0,12);
-	@(posedge clk);
-	@(posedge clk);
-	#10000;
-	@(posedge clk);
-//	PutPacketInFIFO36(32'hE0F0A0B0,36);
-	@(posedge clk);
-	@(posedge clk);
-	task_WriteFIFO36;
-	@(posedge clk);
-	@(posedge clk);
-	#10000;
-	@(posedge clk);
-	@(posedge clk);
-	task_WriteFIFO36;
-//	@(posedge clk);
-//	#30000;
-//	@(posedge clk);
-//	@(posedge clk);
-	task_WriteFIFO36;
-//	@(posedge clk);
-//	#30000;
-//	@(posedge clk);
-//	@(posedge clk);
-	task_WriteFIFO36;
-//	@(posedge clk);
-//	#30000;
-//	@(posedge clk);
-//	@(posedge clk);
-	task_WriteFIFO36;
-	@(posedge clk);
-	#10000;
-	@(posedge clk);
-	@(posedge clk);
-	task_WriteFIFO36;
-	for (i=0; i<8192; i = i+1) begin
-	   @(posedge clk);
-	   #10000;
-	   @(posedge clk);
-	   @(posedge clk);
-	   task_WriteFIFO36;
-	   @(posedge clk);
-	end
-
-//	$dumpvars(0,fifo_extram36_tb);
-	@(posedge clk);
-	task_WriteFIFO36;
-	@(posedge clk);
-
-	#100000000;
-	$finish;
-	
-     end
-
-
-   initial
-     begin
-	@(negedge rst);
-	f36_occ      <= 0;
-	repeat (100)
-	  @(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= 32'h10203040;
-	f36_sof      <= 1;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= f36_data + 32'h01010101;
-	f36_sof      <= 0;
-	f36_eof      <= 0;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 1;
-	f36_data     <= 32'h1F2F3F4F;
-	f36_sof      <= 0;
-	f36_eof      <= 1;
-	@(posedge clk);
-	@(posedge clk);
-	src_rdy_f36i <= 0;
-	
-	
-	
-     end
-   
-//   initial #500000 $finish;
-endmodule // fifo_extram_tb
diff --git a/usrp2/extramfifo/fifo_extram_tb.build b/usrp2/extramfifo/fifo_extram_tb.build
deleted file mode 100755
index 5607c8691..000000000
--- a/usrp2/extramfifo/fifo_extram_tb.build
+++ /dev/null
@@ -1 +0,0 @@
-iverilog -y ../models -y . -y ../control_lib/ -y ../coregen -y ../fifo -y /opt/Xilinx/10.1/ISE/verilog/src/XilinxCoreLib -y /opt/Xilinx/10.1/ISE/verilog/src/unisims/ -o fifo_extram_tb fifo_extram_tb.v
diff --git a/usrp2/extramfifo/fifo_extram_tb.v b/usrp2/extramfifo/fifo_extram_tb.v
deleted file mode 100644
index 73550d9ca..000000000
--- a/usrp2/extramfifo/fifo_extram_tb.v
+++ /dev/null
@@ -1,134 +0,0 @@
-module fifo_extram_tb();
-   
-   reg clk 	 = 0;
-   reg sram_clk  = 0;
-   reg reset 	 = 1;
-   reg clear 	 = 0;
-   
-   initial #1000 reset = 0;
-   always #125 clk = ~clk;
-   always #100 sram_clk = ~sram_clk;
-   
-   reg [15:0] f18_data = 0;
-   reg f18_sof = 0, f18_eof = 0;
-   
-   wire [17:0] f18_in = {f18_eof,f18_sof,f18_data};
-   reg src_rdy_f18i  = 0;
-   wire dst_rdy_f18i;
-
-   wire [17:0] f18_out;
-   wire src_rdy_f18o;
-   reg dst_rdy_f18o  = 0;
-
-   wire [17:0] f18_int;
-   wire        src_rdy_f18int, dst_rdy_f18int;
-       
-   wire [17:0] sram_d;
-   wire [18:0] sram_a;
-   wire [1:0]  sram_bw;
-   wire        sram_we, sram_adv, sram_ce, sram_oe, sram_mode, sram_zz;
-   wire [15:0] f1_occ;
-   
-   fifo_short #(.WIDTH(18)) fifo_short
-     (.clk(sram_clk), .reset(reset), .clear(clear),
-      .datain(f18_in), .src_rdy_i(src_rdy_f18i), .dst_rdy_o(dst_rdy_f18i), .space(),
-      .dataout(f18_int), .src_rdy_o(src_rdy_f18int), .dst_rdy_i(dst_rdy_f18int), .occupied(f1_occ[4:0]) );
-   
-   assign f1_occ[15:5] = 0;
-   
-   fifo_extram fifo_extram
-     (.reset(reset), .clear(clear),
-      .datain(f18_int), .src_rdy_i(src_rdy_f18int), .dst_rdy_o(dst_rdy_f18int), .space(), .occ_in(f1_occ),
-      .dataout(f18_out), .src_rdy_o(src_rdy_f18o), .dst_rdy_i(dst_rdy_f18o), .occupied(), .space_in(7),
-      .sram_clk(sram_clk), .sram_a(sram_a), .sram_d(sram_d), .sram_we(sram_we),
-      .sram_bw(sram_bw), .sram_adv(sram_adv), .sram_ce(sram_ce), .sram_oe(sram_oe),
-      .sram_mode(sram_mode), .sram_zz(sram_zz));
-
-`define idt 1
-`ifdef idt
-   wire [15:0]  dummy16;
-   wire [1:0] 	dummy2;
-   
-   idt71v65603s150 
-     ram_model(.A(sram_a[17:0]),
-	       .adv_ld_(sram_adv),                  // advance (high) / load (low)
-               .bw1_(0), .bw2_(0), .bw3_(0), .bw4_(0),   // byte write enables (low)
-               .ce1_(0), .ce2(1), .ce2_(0),          // chip enables
-               .cen_(sram_ce),                     // clock enable (low)
-	       .clk(sram_clk),                      // clock
-	       .IO({dummy16,sram_d[15:0]}), 
-	       .IOP({dummy2,sram_d[17:16]}),                  // data bus
-               .lbo_(sram_mode),                     // linear burst order (low)
-               .oe_(sram_oe),                      // output enable (low)
-               .r_w_(sram_we));                    // read (high) / write (low)
-`else
-   cy1356 ram_model(.d(sram_d),.clk(sram_clk),.a(sram_a),
-		    .bws(2'b00),.we_b(sram_we),.adv_lb(sram_adv),
-		    .ce1b(0),.ce2(1),.ce3b(0),
-		    .oeb(sram_oe),.cenb(sram_ce),.mode(sram_mode) );
-`endif // !`ifdef idt
-   
-   always @(posedge sram_clk)
-     if(dst_rdy_f18o & src_rdy_f18o)
-       $display("Read: %h",f18_out);
-
-   always @(posedge sram_clk)
-     if(dst_rdy_f18int & src_rdy_f18int)
-       $display("Write: %h",f18_int);
-
-   initial $dumpfile("fifo_extram_tb.vcd");
-   initial $dumpvars(0,fifo_extram_tb);
-
-   task SendPkt;
-      input [15:0] data_start;
-      input [31:0] data_len;
-      begin
-	 @(posedge sram_clk);
-	 f18_data      = data_start;
-	 f18_sof       = 1;
-	 f18_eof       = 0;
-	 src_rdy_f18i  = 1;
-	 while(~dst_rdy_f18i)
-	   #1;
-	 @(posedge sram_clk);
-	 repeat(data_len - 2)
-	   begin
-	      f18_data 	= f18_data + 16'h0101;
-	      f18_sof 	= 0;
-	      while(~dst_rdy_f18i)
-		@(posedge sram_clk);
-
-	      @(posedge sram_clk);
-	   end
-	 f18_data 	= f18_data + 16'h0101;
-	 f18_eof 	= 1;
-	 while(~dst_rdy_f18i)
-	   #1;
-	 @(posedge sram_clk);
-	 src_rdy_f18i = 0;
-	 f18_data  = 0;
-	 f18_eof   = 0;
-      end
-   endtask // SendPkt
-   
-   initial
-     begin
-	@(negedge reset);
-	@(posedge sram_clk);
-	@(posedge sram_clk);
-	#10000;
-	@(posedge sram_clk);
-	SendPkt(16'hA0B0, 100);
-	#10000;
-	//SendPkt(16'hC0D0, 220);
-     end
-
-   initial
-     begin
-	#20000;
-	dst_rdy_f18o  = 1;
-     end
-   
-   initial #200000 $finish;
-endmodule // fifo_extram_tb
-