Added external RAM FIFO to u2plus.

Added code branch to ext_fifo.v using generate that instantiates
different input and out fifo's and touched nobl_fifo code so that it
works at 18 and 36bit widths.
Added 2nd DCM to top level to generate off chip RAMCLK.
Added explicit I/O instances to top level for tristate drivers and
changed signals to core as needed.
Creted new FIFO's in core gen to replace much larger FIFO's used on u2rev3

4 files changed, 169 insertions, 90 deletions

diff --git a/usrp2/extramfifo/ext_fifo.v b/usrp2/extramfifo/ext_fifo.v
index 2af59a75d..2a8d57448 100644
--- a/usrp2/extramfifo/ext_fifo.v
+++ b/usrp2/extramfifo/ext_fifo.v
@@ -18,7 +18,7 @@
  //`define NO_EXT_FIFO
 
 module ext_fifo
-   #(parameter INT_WIDTH=36,EXT_WIDTH=18,RAM_DEPTH=19,FIFO_DEPTH=19)
+  #(parameter INT_WIDTH=36,EXT_WIDTH=18,RAM_DEPTH=19,FIFO_DEPTH=19)
     (
      input int_clk,
      input ext_clk,
@@ -44,34 +44,29 @@ module ext_fifo
 
    wire [EXT_WIDTH-1:0] write_data;
    wire [EXT_WIDTH-1:0] read_data;
-   wire 	    full1, empty1;
-   wire 	    almost_full2, full2, empty2;
+   wire 		full1, empty1;
+   wire 		almost_full2, full2, empty2;
    wire [INT_WIDTH-1:0] data_to_fifo;
    wire [INT_WIDTH-1:0] data_from_fifo;
    wire [FIFO_DEPTH-1:0] capacity;
-		
+   wire 		 space_avail;
+   wire 		 data_avail;
+		 
+   // These next 2 lines here purely because ICARUS is crap at handling generate statements.
+   // Empirically this has been determined to make simulations work.
+   wire 		 read_input_fifo = space_avail & ~empty1;
+   wire 		 write_output_fifo = data_avail;
    
-   // FIFO buffers data from UDP engine into external FIFO clock domain.
-   fifo_xlnx_512x36_2clk_36to18 fifo_xlnx_512x36_2clk_36to18_i1 (
-								 .rst(rst),
-								 .wr_clk(int_clk),
-								 .rd_clk(ext_clk),
-								 .din(datain), // Bus [35 : 0]						
-								 .wr_en(src_rdy_i),						
-								 .rd_en(space_avail&~empty1),						
-								 .dout(write_data), // Bus [17 : 0] 
-								 .full(full1),			
-							         .empty(empty1));
-
-    assign 	    dst_rdy_o = ~full1;
+   assign 		 src_rdy_o = ~empty2;
+   assign 		 dst_rdy_o = ~full1;
 
 `ifdef NO_EXT_FIFO
-   assign 	    space_avail = ~full2;
-   assign 	    data_avail = ~empty1;
-   assign 	    read_data = write_data;
+   assign 		 space_avail = ~full2;
+   assign 		 data_avail = ~empty1;
+   assign 		 read_data = write_data;
 `else
    
-   // External FIFO running at ext clock rate  and 18 bit width.
+   // External FIFO running at ext clock rate  and 18 or 36 bit width.
    nobl_fifo  #(.WIDTH(EXT_WIDTH),.RAM_DEPTH(RAM_DEPTH),.FIFO_DEPTH(FIFO_DEPTH))
      nobl_fifo_i1
        (   
@@ -95,22 +90,67 @@ module ext_fifo
 	   .capacity(capacity)
 	   );
 `endif // !`ifdef NO_EXT_FIFO
+
    
- 
-   // FIFO buffers data read from external FIFO into DSP clk domain and to TX DSP.
-   fifo_xlnx_512x36_2clk_18to36 fifo_xlnx_512x36_2clk_18to36_i1 (
-								 .rst(rst),
-								 .wr_clk(ext_clk),
-								 .rd_clk(int_clk),
-								 .din(read_data), // Bus [17 : 0]
-								 .wr_en(data_avail),
-								 .rd_en(dst_rdy_i),
-								 .dout(dataout), // Bus [35 : 0]
-								 .full(full2),
-								 .prog_full(almost_full2),
-								 .empty(empty2));
-   assign  src_rdy_o = ~empty2;
+   generate
+      if (EXT_WIDTH == 18 && INT_WIDTH == 36) begin: fifo_g1
+	 // FIFO buffers data from UDP engine into external FIFO clock domain.
+	 fifo_xlnx_512x36_2clk_36to18 fifo_xlnx_512x36_2clk_36to18_i1 (
+								       .rst(rst),
+								       .wr_clk(int_clk),
+								       .rd_clk(ext_clk),
+								       .din(datain), // Bus [35 : 0] 
+								       .wr_en(src_rdy_i), 
+								       .rd_en(read_input_fifo),    		
+								       .dout(write_data), // Bus [17 : 0]
+								       .full(full1),			
+							               .empty(empty1));
 
+	 
+	 // FIFO buffers data read from external FIFO into DSP clk domain and to TX DSP.
+	 fifo_xlnx_512x36_2clk_18to36 fifo_xlnx_512x36_2clk_18to36_i1 (
+								       .rst(rst),
+								       .wr_clk(ext_clk),
+								       .rd_clk(int_clk),
+								       .din(read_data), // Bus [17 : 0]
+								       .wr_en(write_output_fifo),
+								       .rd_en(dst_rdy_i),
+								       .dout(dataout), // Bus [35 : 0]
+								       .full(full2),
+								       .prog_full(almost_full2),
+								       .empty(empty2));
+      end // block: fifo_g1
+      else if (EXT_WIDTH == 36 && INT_WIDTH == 36) begin: fifo_g1
+	 // FIFO buffers data from UDP engine into external FIFO clock domain.
+	 fifo_xlnx_32x36_2clk fifo_xlnx_32x36_2clk_i1 (
+						       .rst(rst),
+						       .wr_clk(int_clk),
+						       .rd_clk(ext_clk),
+						       .din(datain), // Bus [35 : 0] 
+						       .wr_en(src_rdy_i),
+						       .rd_en(read_input_fifo),
+						       .dout(write_data), // Bus [35 : 0] 
+						       .full(full1),
+						       .empty(empty1));
+	 
+	 // FIFO buffers data read from external FIFO into DSP clk domain and to TX DSP.
+	 fifo_xlnx_32x36_2clk fifo_xlnx_32x36_2clk_i2 (
+						       .rst(rst),
+						       .wr_clk(ext_clk),
+						       .rd_clk(int_clk),
+						       .din(read_data), // Bus [35 : 0] 
+						       .wr_en(write_output_fifo),
+						       .rd_en(dst_rdy_i),
+						       .dout(dataout), // Bus [35 : 0] 
+						       .full(full2),
+						       .empty(empty2),
+						       .prog_full(almost_full2));
+
+      end    
+   endgenerate
+   
+
+   
    always @ (posedge int_clk)
      debug[31:28] <= {empty2,full1,dst_rdy_i,src_rdy_i };
    
@@ -118,6 +158,7 @@ module ext_fifo
      debug[27:0] <= {RAM_WEn,RAM_CE1n,RAM_A[3:0],read_data[17:0],empty1,space_avail,data_avail,almost_full2 };
 
    always@ (posedge ext_clk)
-//     debug2[31:0] <= {write_data[15:0],read_data[15:0]};
-       debug2[31:0] <= 0;
+     //     debug2[31:0] <= {write_data[15:0],read_data[15:0]};
+     debug2[31:0] <= 0;
+   
 endmodule // ext_fifo
diff --git a/usrp2/extramfifo/ext_fifo_tb.sh b/usrp2/extramfifo/ext_fifo_tb.sh
index dcfede37a..dcfede37a 100644..100755
--- a/usrp2/extramfifo/ext_fifo_tb.sh
+++ b/usrp2/extramfifo/ext_fifo_tb.sh
diff --git a/usrp2/extramfifo/ext_fifo_tb.v b/usrp2/extramfifo/ext_fifo_tb.v
index 0eda89769..5f4e28719 100644
--- a/usrp2/extramfifo/ext_fifo_tb.v
+++ b/usrp2/extramfifo/ext_fifo_tb.v
@@ -1,18 +1,31 @@
 `timescale 1ns / 1ps
-`define INT_WIDTH 36
-`define EXT_WIDTH 18
-`define RAM_DEPTH 19
-`define FIFO_DEPTH 8
-`define DUMP_VCD_FULL
-
-module ext_fifo_tb();
+//`define USRP2
+`define USRP2PLUS
 
+`ifdef USRP2
+ `define INT_WIDTH 36
+ `define EXT_WIDTH 18
+ `define RAM_DEPTH 19
+ `define FIFO_DEPTH 8
+ `define DUMP_VCD_FULL
+ `define INT_CLK_PERIOD 5
+ `define EXT_CLK_PERIOD 4
+`elsif USRP2PLUS
+ `define INT_WIDTH 36
+ `define EXT_WIDTH 36
+ `define RAM_DEPTH 18
+ `define FIFO_DEPTH 8
+ `define DUMP_VCD_FULL
+ `define INT_CLK_PERIOD 5
+ `define EXT_CLK_PERIOD 5
+`endif //  `ifdef USRP2
    
+
+module ext_fifo_tb();
+  
    reg int_clk;
    reg ext_clk;
    reg rst;
-   
-
 
    wire [`EXT_WIDTH-1:0] RAM_D_pi;
    wire [`EXT_WIDTH-1:0] RAM_D_po;
@@ -33,7 +46,6 @@ module ext_fifo_tb();
    reg 			dst_rdy_i;
    integer 		ether_frame;
    
-
    // Clocks
    // Int clock is 100MHz
    // Ext clock is 125MHz
@@ -47,10 +59,10 @@ module ext_fifo_tb();
      end
 
    always
-     #5 int_clk <= ~int_clk;
+     #(`INT_CLK_PERIOD/2) int_clk <= ~int_clk;
 
    always
-     #4 ext_clk <= ~ext_clk;
+     #(`EXT_CLK_PERIOD/2) ext_clk <= ~ext_clk;
 
    initial
      begin
@@ -270,7 +282,7 @@ module ext_fifo_tb();
    //
    
    generate  
-      for (i=0;i<18;i=i+1)
+      for (i=0;i<`EXT_WIDTH;i=i+1)
         begin : gen_RAM_D_IO
 
 	   IOBUF #(
@@ -309,28 +321,53 @@ module ext_fifo_tb();
 
    assign 		#2 RAM_A_ext = RAM_A;
    
- 
    
-   idt71v65603s150  idt71v65603s150_i1
-     (
-      .A(RAM_A_ext[17:0]),
-      .adv_ld_(RAM_LDn_ext),                  // advance (high) / load (low)
-      .bw1_(1'b0), 
-      .bw2_(1'b0), 
-      .bw3_(1'b1), 
-      .bw4_(1'b1),   // byte write enables (low)
-      .ce1_(RAM_CE1n_ext), 
-      .ce2(1'b1), 
-      .ce2_(1'b0),          // chip enables
-      .cen_(RAM_CENn_ext),                     // clock enable (low)
-      .clk(ext_clk),                      // clock
-      .IO({RAM_D[16:9],RAM_D[7:0]}), 
-      .IOP({RAM_D[17],RAM_D[8]}),                  // data bus
-      .lbo_(1'b0),                     // linear burst order (low)
-      .oe_(RAM_OEn_ext),                      // output enable (low)
-      .r_w_(RAM_WEn_ext)
-      );                    // read (high) / write (low)
+   generate
+      if (`EXT_WIDTH==18) begin: ram_tb_g1
+	 idt71v65603s150  idt71v65603s150_i1
+	   (
+	    .A(RAM_A_ext[17:0]),
+	    .adv_ld_(RAM_LDn_ext),                  // advance (high) / load (low)
+	    .bw1_(1'b0), 
+	    .bw2_(1'b0),
+	    .bw3_(1'b1), 
+	    .bw4_(1'b1),   // byte write enables (low)
+	    .ce1_(RAM_CE1n_ext), 
+	    .ce2(1'b1), 
+	    .ce2_(1'b0),          // chip enables
+	    .cen_(RAM_CENn_ext),                     // clock enable (low)
+	    .clk(ext_clk),                      // clock
+	    .IO({RAM_D[16:9],RAM_D[7:0]}), 
+	    .IOP({RAM_D[17],RAM_D[8]}),                  // data bus
+	    .lbo_(1'b0),                     // linear burst order (low)
+	    .oe_(RAM_OEn_ext),                      // output enable (low)
+	    .r_w_(RAM_WEn_ext)
+	    );                    // read (high) / write (low)
+      end // block: ram_tb_g1
+      else if (`EXT_WIDTH==36) begin: ram_tb_g1
+	 idt71v65603s150  idt71v65603s150_i1
+	   (
+	    .A(RAM_A_ext[17:0]),
+	    .adv_ld_(RAM_LDn_ext),                  // advance (high) / load (low)
+	    .bw1_(1'b0), 
+	    .bw2_(1'b0),
+	    .bw3_(1'b0), 
+	    .bw4_(1'b0),   // byte write enables (low)
+	    .ce1_(RAM_CE1n_ext), 
+	    .ce2(1'b1), 
+	    .ce2_(1'b0),          // chip enables
+	    .cen_(RAM_CENn_ext),                     // clock enable (low)
+	    .clk(ext_clk),                      // clock
+	    .IO(RAM_D[31:0]), 
+	    .IOP(RAM_D[35:32]),                  // data bus
+	    .lbo_(1'b0),                     // linear burst order (low)
+	    .oe_(RAM_OEn_ext),                      // output enable (low)
+	    .r_w_(RAM_WEn_ext)
+	    );                    // read (high) / write (low)
+      end // block: ram_tb_g1
  
+   endgenerate
+   
 /* -----\/----- EXCLUDED -----\/-----
 
 	 
diff --git a/usrp2/extramfifo/nobl_fifo.v b/usrp2/extramfifo/nobl_fifo.v
index 4c009d980..0b63768fc 100644
--- a/usrp2/extramfifo/nobl_fifo.v
+++ b/usrp2/extramfifo/nobl_fifo.v
@@ -70,26 +70,27 @@ module nobl_fifo
    // Simple NoBL SRAM interface, 4 cycle read latency.
    // Read/Write arbitration via temprary application of empty/full flags.
    //
-   nobl_if nobl_if_i1
-     (
-      .clk(clk),
-      .rst(rst),
-      .RAM_D_pi(RAM_D_pi),
-      .RAM_D_po(RAM_D_po),
-      .RAM_D_poe(RAM_D_poe),
-      .RAM_A(RAM_A),
-      .RAM_WEn(RAM_WEn),
-      .RAM_CENn(RAM_CENn),
-      .RAM_LDn(RAM_LDn),
-      .RAM_OEn(RAM_OEn),
-      .RAM_CE1n(RAM_CE1n),
-      .address(address),
-      .data_out(write_data),
-      .data_in(read_data),
-      .data_in_valid(data_avail),
-      .write(write),
-      .enable(enable)
-      );
+   nobl_if #(.WIDTH(WIDTH),.DEPTH(RAM_DEPTH))
+     nobl_if_i1
+       (
+	.clk(clk),
+	.rst(rst),
+	.RAM_D_pi(RAM_D_pi),
+	.RAM_D_po(RAM_D_po),
+	.RAM_D_poe(RAM_D_poe),
+	.RAM_A(RAM_A),
+	.RAM_WEn(RAM_WEn),
+	.RAM_CENn(RAM_CENn),
+	.RAM_LDn(RAM_LDn),
+	.RAM_OEn(RAM_OEn),
+	.RAM_CE1n(RAM_CE1n),
+	.address(address),
+	.data_out(write_data),
+	.data_in(read_data),
+	.data_in_valid(data_avail),
+	.write(write),
+	.enable(enable)
+	);