usrp-e100: added readback mux 32 as slave 7 for time readback

created new component wb_readback_mux_16LE.v for 16 wide bus
connected vita time pps to vita time controller and readbacks

2 files changed, 74 insertions, 0 deletions

diff --git a/usrp2/control_lib/Makefile.srcs b/usrp2/control_lib/Makefile.srcs
index d3bb7e2c8..751b40828 100644
--- a/usrp2/control_lib/Makefile.srcs
+++ b/usrp2/control_lib/Makefile.srcs
@@ -30,6 +30,7 @@ srl.v \
 system_control.v \
 wb_1master.v \
 wb_readback_mux.v \
+wb_readback_mux_16LE.v \
 quad_uart.v \
 simple_uart.v \
 simple_uart_tx.v \
diff --git a/usrp2/control_lib/wb_readback_mux_16LE.v b/usrp2/control_lib/wb_readback_mux_16LE.v
new file mode 100644
index 000000000..2b01898c1
--- /dev/null
+++ b/usrp2/control_lib/wb_readback_mux_16LE.v
@@ -0,0 +1,73 @@
+
+
+// Note -- clocks must be synchronous (derived from the same source)
+// Assumes alt_clk is running at a multiple of wb_clk
+
+// Note -- assumes that the lower-16 bits will be requested first,
+// and that the upper-16 bit request will come immediately after.
+
+module wb_readback_mux_16LE
+  (input wb_clk_i,
+   input wb_rst_i,
+   input wb_stb_i,
+   input [15:0] wb_adr_i,
+   output [15:0] wb_dat_o,
+   output reg wb_ack_o,
+
+   input [31:0] word00,
+   input [31:0] word01,
+   input [31:0] word02,
+   input [31:0] word03,
+   input [31:0] word04,
+   input [31:0] word05,
+   input [31:0] word06,
+   input [31:0] word07,
+   input [31:0] word08,
+   input [31:0] word09,
+   input [31:0] word10,
+   input [31:0] word11,
+   input [31:0] word12,
+   input [31:0] word13,
+   input [31:0] word14,
+   input [31:0] word15
+   );
+
+   wire ack_next = wb_stb_i & ~wb_ack_o;
+
+   always @(posedge wb_clk_i)
+     if(wb_rst_i)
+       wb_ack_o <= 0;
+     else
+       wb_ack_o <= ack_next;
+
+   reg [31:0] data;
+   assign wb_dat_o = data[15:0];
+
+   always @(posedge wb_clk_i)
+    if (wb_adr_i[1] & ack_next) begin //upper half
+        data[15:0] <= data[31:16];
+    end
+    else if (~wb_adr_i[1] & ack_next) begin //lower half
+     case(wb_adr_i[5:2])
+       0 : data <= word00;
+       1 : data <= word01;
+       2 : data <= word02;
+       3 : data <= word03;
+       4 : data <= word04;
+       5 : data <= word05;
+       6 : data <= word06;
+       7 : data <= word07;
+       8 : data <= word08;
+       9 : data <= word09;
+       10: data <= word10;
+       11: data <= word11;
+       12: data <= word12;
+       13: data <= word13;
+       14: data <= word14;
+       15: data <= word15;
+     endcase // case(wb_adr_i[5:2])
+    end
+
+endmodule // wb_readback_mux
+
+