Moved usrp1 fpga files into usrp1 subdir.

1 files changed, 71 insertions, 0 deletions

diff --git a/usrp1/tb/cbus_tb.v b/usrp1/tb/cbus_tb.v
new file mode 100644
index 000000000..53cc1272b
--- /dev/null
+++ b/usrp1/tb/cbus_tb.v
@@ -0,0 +1,71 @@
+module cbus_tb;
+
+`define ch1in_freq 0
+`define ch2in_freq 1
+`define ch3in_freq 2
+`define ch4in_freq 3
+`define ch1out_freq 4
+`define ch2out_freq 5
+`define ch3out_freq 6
+`define ch4out_freq 7
+`define rates 8
+`define misc 9
+  
+   task send_config_word;
+      input [7:0] addr;
+      input [31:0] data;
+      integer i;
+      
+      begin
+	 #10 serenable = 1;
+	 for(i=7;i>=0;i=i-1)
+	   begin
+	      #10 serdata = addr[i];
+	      #10 serclk = 0;
+	      #10 serclk = 1;
+	      #10 serclk = 0;
+	   end
+	 for(i=31;i>=0;i=i-1)
+	   begin
+	      #10 serdata = data[i];
+	      #10 serclk = 0;
+	      #10 serclk = 1;
+	      #10 serclk = 0;
+	   end
+	 #10 serenable = 0;
+	 // #10 serclk = 1;
+	 // #10 serclk = 0;
+      end
+   endtask // send_config_word
+   
+   initial $dumpfile("cbus_tb.vcd");
+   initial $dumpvars(0,cbus_tb);
+
+   initial reset = 1;
+   initial #500 reset = 0;
+      
+   reg serclk, serdata, serenable, reset;
+   wire SDO;
+   
+  control_bus control_bus
+    ( .serial_clock(serclk),
+      .serial_data_in(serdata),
+      .enable(serenable),
+      .reset(reset),
+      .serial_data_out(SDO) );
+
+
+   initial 
+     begin
+	#1000 send_config_word(8'd1,32'hDEAD_BEEF);
+	#1000 send_config_word(8'd3,32'hDDEE_FF01);
+	#1000 send_config_word(8'd19,32'hFFFF_FFFF);
+	#1000 send_config_word(8'd23,32'h1234_FEDC);
+	#1000 send_config_word(8'h80,32'h0);
+	#1000 send_config_word(8'h81,32'h0);
+	#1000 send_config_word(8'h82,32'h0);
+	#1000 reset = 1;
+	#1 $finish;
+     end
+   
+endmodule // cbus_tb