Merge branch 'usrp1' into usrp2

Conflicts:
	.gitignore

10 files changed, 1526 insertions, 0 deletions

diff --git a/usrp1/inband_lib/chan_fifo_reader.v b/usrp1/inband_lib/chan_fifo_reader.v
new file mode 100755
index 000000000..69da9ec5a
--- /dev/null
+++ b/usrp1/inband_lib/chan_fifo_reader.v
@@ -0,0 +1,219 @@
+module chan_fifo_reader 
+   (reset, tx_clock, tx_strobe, timestamp_clock, samples_format,
+    fifodata, pkt_waiting, rdreq, skip, tx_q, tx_i,
+    underrun, tx_empty, debug, rssi, threshhold, rssi_wait) ;
+
+   input   wire                     reset ;
+   input   wire                     tx_clock ;
+   input   wire                     tx_strobe ; //signal to output tx_i and tx_q
+   input   wire              [31:0] timestamp_clock ; //current time
+   input   wire               [3:0] samples_format ;// not useful at this point
+   input   wire              [31:0] fifodata ; //the data input
+   input   wire                     pkt_waiting ; //signal the next packet is ready
+   output  reg                      rdreq ; //actually an ack to the current fifodata
+   output  reg                      skip ; //finish reading current packet
+   output  reg               [15:0] tx_q ; //top 16 bit output of fifodata
+   output  reg               [15:0] tx_i ; //bottom 16 bit output of fifodata
+   output  reg                      underrun ; 
+   output  reg                      tx_empty ; //cause 0 to be the output
+   input   wire		     [31:0] rssi;
+   input   wire		     [31:0] threshhold;
+   input   wire		     [31:0] rssi_wait;
+
+   output wire [14:0] debug;
+   assign debug = {7'd0, rdreq, skip, reader_state, pkt_waiting, tx_strobe, tx_clock};
+   
+   //Samples format
+   // 16 bits interleaved complex samples
+   `define QI16                     4'b0
+    
+   // States
+   parameter IDLE           =     3'd0;    
+   parameter HEADER         =     3'd1;
+   parameter TIMESTAMP      =     3'd2;
+   parameter WAIT           =     3'd3;
+   parameter WAITSTROBE     =     3'd4;
+   parameter SEND           =     3'd5;
+
+   // Header format
+   `define PAYLOAD                  8:2
+   `define ENDOFBURST               27
+   `define STARTOFBURST             28
+   `define RSSI_FLAG                26
+	
+
+   /* State registers */
+   reg                        [2:0] reader_state;
+   /* Local registers */  
+   reg                        [6:0] payload_len;
+   reg                        [6:0] read_len;
+   reg                       [31:0] timestamp;
+   reg                              burst;
+   reg                              trash;
+   reg                              rssi_flag;
+   reg			     [31:0] time_wait;
+   
+   always @(posedge tx_clock)
+     begin
+       if (reset) 
+         begin
+           reader_state <= IDLE;
+           rdreq <= 0;
+           skip <= 0;
+           underrun <= 0;
+           burst <= 0;
+           tx_empty <= 1;
+           tx_q <= 0;
+           tx_i <= 0;
+           trash <= 0;
+           rssi_flag <= 0;
+           time_wait <= 0;
+         end
+       else 
+         begin
+           case (reader_state)
+             IDLE:
+               begin
+               /*
+		* reset all the variables and wait for a tx_strobe
+		* it is assumed that the ram connected to this fifo_reader 
+		* is a short hand fifo meaning that the header to the next packet
+		* is already available to this fifo_reader when pkt_waiting is on
+		*/
+                 skip <=0;
+                 time_wait <= 0;
+                 if (pkt_waiting == 1)
+                   begin
+                     reader_state <= HEADER;
+                     rdreq <= 1;
+                     underrun <= 0;
+                   end
+                 if (burst == 1 && pkt_waiting == 0)
+                     underrun <= 1;
+                 if (tx_strobe == 1)
+                     tx_empty <= 1 ;
+               end
+
+               /* Process header */
+               HEADER:
+                 begin
+                   if (tx_strobe == 1)
+                       tx_empty <= 1 ;
+                   
+                   rssi_flag <= fifodata[`RSSI_FLAG]&fifodata[`STARTOFBURST];
+                   //Check Start/End burst flag
+                   if  (fifodata[`STARTOFBURST] == 1 
+                       && fifodata[`ENDOFBURST] == 1)
+                       burst <= 0;
+                   else if (fifodata[`STARTOFBURST] == 1)
+                       burst <= 1;
+                   else if (fifodata[`ENDOFBURST] == 1)
+                       burst <= 0;
+
+                   if (trash == 1 && fifodata[`STARTOFBURST] == 0)
+                     begin
+                       skip <= 1;
+                       reader_state <= IDLE;
+                       rdreq <= 0;
+                     end 
+                   else
+                     begin   
+                       payload_len <= fifodata[`PAYLOAD] ;
+                       read_len <= 0;
+                       rdreq <= 1;
+                       reader_state <= TIMESTAMP;
+                     end
+                 end
+
+               TIMESTAMP: 
+                 begin
+                   timestamp <= fifodata;
+                   reader_state <= WAIT;
+                   if (tx_strobe == 1)
+                       tx_empty <= 1 ;
+                   rdreq <= 0;
+                 end
+				
+               // Decide if we wait, send or discard samples
+               WAIT: 
+                 begin
+                   if (tx_strobe == 1)
+                       tx_empty <= 1 ;
+                    
+                   time_wait <= time_wait + 32'd1;
+                   // Outdated
+                   if ((timestamp < timestamp_clock) ||
+                      (time_wait >= rssi_wait && rssi_wait != 0 && rssi_flag))
+                     begin
+                       trash <= 1;
+                       reader_state <= IDLE;
+                       skip <= 1;
+                     end  
+                   // Let's send it					
+                   else if (timestamp == timestamp_clock 
+                             || timestamp == 32'hFFFFFFFF)
+                     begin
+                       if (rssi <= threshhold || rssi_flag == 0)
+                         begin
+                           trash <= 0;
+                           reader_state <= WAITSTROBE; 
+                         end
+                       else
+                         reader_state <= WAIT;
+                     end
+                   else
+                       reader_state <= WAIT;
+                 end
+                 
+               // Wait for the transmit chain to be ready
+               WAITSTROBE:
+                 begin
+                   // If end of payload...
+                   if (read_len == payload_len)
+                     begin
+                       reader_state <= IDLE;
+                       skip <= 1;
+                       if (tx_strobe == 1)
+                           tx_empty <= 1 ;
+                     end  
+                   else if (tx_strobe == 1)
+                     begin
+                       reader_state <= SEND;
+                       rdreq <= 1;
+                     end
+                 end
+               
+               // Send the samples to the tx_chain
+               SEND:
+                 begin
+                   reader_state <= WAITSTROBE; 
+                   read_len <= read_len + 7'd1;
+                   tx_empty <= 0;
+                   rdreq <= 0;
+                   
+                   case(samples_format)
+                       `QI16:
+                        begin
+                            tx_i <= fifodata[15:0];
+                            tx_q <= fifodata[31:16];
+                        end
+                        
+                        // Assume 16 bits complex samples by default
+                        default:
+                        begin
+                            tx_i <= fifodata[15:0];
+                            tx_q <= fifodata[31:16];
+                        end 
+                   endcase
+                 end
+               
+               default:
+                 begin
+                   //error handling
+                   reader_state <= IDLE;
+                 end
+           endcase
+       end
+   end
+ 
+endmodule
diff --git a/usrp1/inband_lib/channel_demux.v b/usrp1/inband_lib/channel_demux.v
new file mode 100644
index 000000000..cca5cdb65
--- /dev/null
+++ b/usrp1/inband_lib/channel_demux.v
@@ -0,0 +1,78 @@
+module channel_demux
+ #(parameter NUM_CHAN = 2) (     //usb Side
+   input [31:0]usbdata_final,
+   input WR_final, 
+   // TX Side
+   input reset,
+   input txclk,
+   output reg [NUM_CHAN:0] WR_channel,
+   output reg [31:0] ram_data,
+   output reg [NUM_CHAN:0] WR_done_channel );
+   /* Parse header and forward to ram */
+	
+    reg [2:0]reader_state;
+    reg [4:0]channel ;
+    reg [6:0]read_length ;
+	
+	 // States
+    parameter IDLE      =    3'd0;
+    parameter HEADER    =    3'd1;
+    parameter WAIT      =    3'd2;
+    parameter FORWARD   =    3'd3;
+	
+	`define CHANNEL 20:16
+	`define PKT_SIZE 127
+	wire [4:0] true_channel;
+	assign true_channel = (usbdata_final[`CHANNEL] == 5'h1f) ?
+							NUM_CHAN : (usbdata_final[`CHANNEL]);
+	
+	always @(posedge txclk)
+	  begin
+	    if (reset)
+	      begin
+	       reader_state <= IDLE;
+	       WR_channel <= 0;
+	       WR_done_channel <= 0;
+	      end
+	      else
+	        case (reader_state)
+	        IDLE: begin
+	            if (WR_final)
+	                reader_state <= HEADER; 
+	            end
+	       
+            // Store channel and forware header
+	        HEADER: begin
+	            channel <= true_channel;
+	            WR_channel[true_channel] <= 1;
+	            ram_data <= usbdata_final;
+				read_length <= 7'd0 ;
+				
+                reader_state <= WAIT;
+	        end
+	       
+	        WAIT: begin
+	           WR_channel[channel] <= 0;
+	
+			   if (read_length == `PKT_SIZE)
+	               reader_state <= IDLE;
+	           else if (WR_final)
+	               reader_state <= FORWARD;
+	        end
+	       
+	        FORWARD: begin
+	           WR_channel[channel] <= 1;
+	           ram_data <= usbdata_final;
+	           read_length <= read_length + 7'd1;
+	           
+	           reader_state <= WAIT;
+	        end
+	
+			default:
+               begin
+					//error handling
+                   reader_state <= IDLE;
+               end
+	       endcase
+	   end
+endmodule
diff --git a/usrp1/inband_lib/channel_ram.v b/usrp1/inband_lib/channel_ram.v
new file mode 100755
index 000000000..9621246c5
--- /dev/null
+++ b/usrp1/inband_lib/channel_ram.v
@@ -0,0 +1,107 @@
+module channel_ram 
+   ( // System
+     input txclk, input reset,
+     // USB side
+     input [31:0] datain, input WR, input WR_done, output have_space,
+     // Reader side 
+     output [31:0] dataout, input RD, input RD_done, output packet_waiting);
+	
+   reg [6:0] wr_addr, rd_addr;
+   reg [1:0] which_ram_wr, which_ram_rd;
+   reg [2:0] nb_packets;
+	
+   reg [31:0] ram0 [0:127];
+   reg [31:0] ram1 [0:127];
+   reg [31:0] ram2 [0:127];
+   reg [31:0] ram3 [0:127];
+	
+   reg [31:0] dataout0;
+   reg [31:0] dataout1;
+   reg [31:0] dataout2;
+   reg [31:0] dataout3;
+	
+   wire wr_done_int;
+   wire rd_done_int;
+   wire [6:0] rd_addr_final;
+   wire [1:0] which_ram_rd_final;
+	
+   // USB side
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd0)) ram0[wr_addr] <= datain;
+			
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd1)) ram1[wr_addr] <= datain;
+
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd2)) ram2[wr_addr] <= datain;
+
+   always @(posedge txclk)
+       if(WR & (which_ram_wr == 2'd3)) ram3[wr_addr] <= datain;
+
+   assign wr_done_int = ((WR && (wr_addr == 7'd127)) || WR_done);
+   
+   always @(posedge txclk)
+       if(reset)
+           wr_addr <= 0;
+       else if (WR_done)
+           wr_addr <= 0;
+       else if (WR) 
+           wr_addr <= wr_addr + 7'd1;
+		
+   always @(posedge txclk)
+      if(reset)
+          which_ram_wr <= 0;
+      else if (wr_done_int) 
+          which_ram_wr <= which_ram_wr + 2'd1;
+	
+   assign have_space = (nb_packets < 3'd3);
+		
+   // Reader side
+   // short hand fifo
+   // rd_addr_final is what rd_addr is going to be next clock cycle
+   // which_ram_rd_final is what which_ram_rd is going to be next clock cycle
+   always @(posedge txclk)  dataout0 <= ram0[rd_addr_final];
+   always @(posedge txclk)  dataout1 <= ram1[rd_addr_final];
+   always @(posedge txclk)  dataout2 <= ram2[rd_addr_final];
+   always @(posedge txclk)  dataout3 <= ram3[rd_addr_final];
+	
+   assign dataout = (which_ram_rd_final[1]) ? 
+                    (which_ram_rd_final[0] ? dataout3 : dataout2) :
+                    (which_ram_rd_final[0] ? dataout1 : dataout0);
+
+   //RD_done is the only way to signal the end of one packet
+   assign rd_done_int = RD_done;   
+
+   always @(posedge txclk)
+       if (reset)
+           rd_addr <= 0;
+       else if (RD_done)
+           rd_addr <= 0;
+       else if (RD) 
+           rd_addr <= rd_addr + 7'd1;
+			
+   assign rd_addr_final = (reset|RD_done) ? (6'd0) : 
+	                  ((RD)?(rd_addr+7'd1):rd_addr); 
+	
+   always @(posedge txclk)
+       if (reset)
+           which_ram_rd <= 0;
+       else if (rd_done_int)
+           which_ram_rd <= which_ram_rd + 2'd1;
+
+   assign which_ram_rd_final = (reset) ? (2'd0):
+	                       ((rd_done_int) ? (which_ram_rd + 2'd1) : which_ram_rd);
+	                        
+   //packet_waiting is set to zero if rd_done_int is high
+   //because there is no guarantee that nb_packets will be pos.
+
+   assign packet_waiting = (nb_packets > 1) | ((nb_packets == 1)&(~rd_done_int));
+   always @(posedge txclk)
+       if (reset)
+           nb_packets <= 0;
+       else if (wr_done_int & ~rd_done_int)
+           nb_packets <= nb_packets + 3'd1;
+       else if (rd_done_int & ~wr_done_int)
+           nb_packets <= nb_packets - 3'd1;
+			
+endmodule
diff --git a/usrp1/inband_lib/cmd_reader.v b/usrp1/inband_lib/cmd_reader.v
new file mode 100755
index 000000000..b69ea02b7
--- /dev/null
+++ b/usrp1/inband_lib/cmd_reader.v
@@ -0,0 +1,305 @@
+module cmd_reader
+   (//System
+    input reset, input txclk, input [31:0] timestamp_clock,
+    //FX2 Side
+    output reg skip, output reg rdreq, 
+    input [31:0] fifodata, input pkt_waiting,
+    //Rx side
+    input rx_WR_enabled, output reg [15:0] rx_databus,
+    output reg rx_WR, output reg rx_WR_done,
+    //register io
+    input wire [31:0] reg_data_out, output reg [31:0] reg_data_in,
+    output reg [6:0] reg_addr, output reg [1:0] reg_io_enable,
+    output wire [14:0] debug, output reg stop, output reg [15:0] stop_time);
+	
+   // States
+   parameter IDLE                       =   4'd0;
+   parameter HEADER                     =   4'd1;
+   parameter TIMESTAMP                  =   4'd2;
+   parameter WAIT          	        =   4'd3;
+   parameter TEST                       =   4'd4;
+   parameter SEND                       =   4'd5;
+   parameter PING                       =   4'd6;
+   parameter WRITE_REG                  =   4'd7;
+   parameter WRITE_REG_MASKED           =   4'd8;
+   parameter READ_REG                   =   4'd9;
+   parameter DELAY                      =   4'd14;		
+
+   `define OP_PING_FIXED                    8'd0
+   `define OP_PING_FIXED_REPLY              8'd1
+   `define OP_WRITE_REG	                    8'd2
+   `define OP_WRITE_REG_MASKED              8'd3
+   `define OP_READ_REG                      8'd4
+   `define OP_READ_REG_REPLY                8'd5
+   `define OP_DELAY                         8'd12
+	
+   reg [6:0]   payload;
+   reg [6:0]   payload_read;
+   reg [3:0]   state;
+   reg [15:0]  high;
+   reg [15:0]  low;
+   reg         pending;
+   reg [31:0]  value0;
+   reg [31:0]  value1;
+   reg [31:0]  value2;
+   reg [1:0]   lines_in;
+   reg [1:0]   lines_out;
+   reg [1:0]   lines_out_total;
+	
+   `define JITTER                           5
+   `define OP_CODE                          31:24
+   `define PAYLOAD                          8:2
+	
+   wire [7:0] ops;
+   assign ops = value0[`OP_CODE];
+   assign debug = {state[3:0], lines_out[1:0], pending, rx_WR, rx_WR_enabled, value0[2:0], ops[2:0]};
+	
+   always @(posedge txclk)
+       if (reset)
+         begin
+           pending <= 0;
+           state <= IDLE;
+           skip <= 0;
+           rdreq <= 0;
+           rx_WR <= 0;
+           reg_io_enable <= 0;
+           reg_data_in <= 0;
+           reg_addr <= 0;
+           stop <= 0;
+          end
+        else case (state)
+          IDLE : 
+            begin
+              payload_read <= 0;
+              skip <= 0;
+              lines_in <= 0;
+              if(pkt_waiting)
+                begin
+                  state <= HEADER;
+                  rdreq <= 1;
+                end
+             end
+          
+          HEADER : 
+            begin
+              payload <= fifodata[`PAYLOAD];
+              state <= TIMESTAMP;
+            end
+          
+          TIMESTAMP : 
+            begin
+              value0 <= fifodata;
+              state <= WAIT;
+              rdreq <= 0;
+            end
+			
+          WAIT : 
+            begin
+              // Let's send it
+              if ((value0 <= timestamp_clock + `JITTER 
+                 && value0 > timestamp_clock)
+                 || value0 == 32'hFFFFFFFF)
+                  state <= TEST;
+              // Wait a little bit more
+              else if (value0 > timestamp_clock + `JITTER)
+                  state <= WAIT; 
+              // Outdated
+              else if (value0 < timestamp_clock)
+                begin
+                  state <= IDLE;
+                  skip <= 1;
+                end
+            end
+			
+          TEST : 
+            begin
+              reg_io_enable <= 0;
+              rx_WR <= 0;
+              rx_WR_done <= 1;
+              stop <= 0;
+              if (payload_read == payload)
+                begin
+                  skip <= 1;
+                  state <= IDLE;
+                  rdreq <= 0;
+                end
+              else
+                begin
+                  value0 <= fifodata;
+                  lines_in <= 2'd1;
+                  rdreq <= 1;
+                  payload_read <= payload_read + 7'd1;
+                  lines_out <= 0;
+                  case (fifodata[`OP_CODE])
+                    `OP_PING_FIXED: 
+                      begin
+                        state <= PING;
+                      end
+                    `OP_WRITE_REG: 
+                      begin
+                        state <= WRITE_REG;
+                        pending <= 1;
+                      end
+                    `OP_WRITE_REG_MASKED: 
+                      begin
+                        state <= WRITE_REG_MASKED;
+                        pending <= 1;
+                      end
+                    `OP_READ_REG: 
+                      begin
+                        state <= READ_REG;
+                      end
+                    `OP_DELAY: 
+                      begin
+                        state <= DELAY;
+                      end
+                    default: 
+                      begin
+                      //error, skip this packet
+                        skip <= 1;
+                        state <= IDLE;
+                      end
+                  endcase
+                end
+              end
+			
+            SEND: 
+              begin
+                rdreq <= 0;
+                rx_WR_done <= 0;
+                if (pending)
+                  begin
+                    rx_WR <= 1;
+                    rx_databus <= high;
+                    pending <= 0;
+                    if (lines_out == lines_out_total)
+                        state <= TEST;
+                    else case (ops)
+                        `OP_READ_REG: 
+                          begin
+                            state <= READ_REG;
+                          end
+                         default: 
+                           begin
+                             state <= TEST;
+                           end
+                    endcase
+                  end
+                else
+                  begin
+                    if (rx_WR_enabled)
+                      begin
+                        rx_WR <= 1;
+                        rx_databus <= low;
+                        pending <= 1;
+                        lines_out <= lines_out + 2'd1;
+                      end
+                    else
+                        rx_WR <= 0;
+                  end
+                end
+			
+            PING: 
+              begin
+                rx_WR <= 0;
+                rdreq <= 0;
+                rx_WR_done <= 0;
+                lines_out_total <= 2'd1;
+                pending <= 0; 
+                state <= SEND;
+                high <= {`OP_PING_FIXED_REPLY, 8'd2};
+                low <= value0[15:0];	
+              end
+			
+            READ_REG: 
+              begin
+                rx_WR <= 0;
+                rx_WR_done <= 0;
+                rdreq <= 0;
+                lines_out_total <= 2'd2;
+                pending <= 0;
+                state <= SEND;
+                if (lines_out == 0)
+                  begin
+                    high <= {`OP_READ_REG_REPLY, 8'd6};
+                    low <= value0[15:0];
+                    reg_io_enable <= 2'd3;
+                    reg_addr <= value0[6:0];
+                  end
+                else
+                  begin		
+                    high <= reg_data_out[31:16];
+                    low <= reg_data_out[15:0];
+                  end
+             end    
+			
+            WRITE_REG: 
+              begin
+                rx_WR <= 0;
+                if (pending)
+                    pending <= 0;
+                else
+                  begin
+                    if (lines_in == 2'd1)
+                      begin
+                        payload_read <= payload_read + 7'd1;
+                        lines_in <= lines_in + 2'd1;
+                        value1 <= fifodata;
+                        rdreq <= 0;
+                      end
+                    else
+                      begin
+                        reg_io_enable <= 2'd2;
+                        reg_data_in <= value1;
+                        reg_addr <= value0[6:0];
+                        state <= TEST;
+                      end
+                  end
+              end
+			
+            WRITE_REG_MASKED: 
+              begin
+                rx_WR <= 0;
+                if (pending)
+                    pending <= 0;
+                else
+                  begin
+                    if (lines_in == 2'd1)
+                      begin
+                        rdreq <= 1;
+                        payload_read <= payload_read + 7'd1;
+                        lines_in <= lines_in + 2'd1;
+                        value1 <= fifodata;
+                      end
+                    else if (lines_in == 2'd2)
+                      begin
+                        rdreq <= 0;
+                        payload_read <= payload_read + 7'd1;
+                        lines_in <= lines_in + 2'd1;
+                        value2 <= fifodata;
+                      end
+                    else
+                      begin
+                        reg_io_enable <= 2'd2;
+                        reg_data_in <= (value1 & value2);
+                        reg_addr <= value0[6:0];
+                        state <= TEST;
+                      end
+                  end
+              end
+			
+            DELAY : 
+              begin
+                rdreq <= 0;
+                stop <= 1;
+                stop_time <= value0[15:0];
+                state <= TEST;
+              end
+			
+            default : 
+              begin
+                //error state handling
+                state <= IDLE;
+              end
+        endcase
+endmodule
diff --git a/usrp1/inband_lib/packet_builder.v b/usrp1/inband_lib/packet_builder.v
new file mode 100755
index 000000000..2c9122394
--- /dev/null
+++ b/usrp1/inband_lib/packet_builder.v
@@ -0,0 +1,152 @@
+module packet_builder #(parameter NUM_CHAN = 2)(
+    // System
+    input rxclk,
+    input reset,
+	 input [31:0] timestamp_clock,
+	 input [3:0] channels,
+    // ADC side
+    input [15:0]chan_fifodata,
+    input [NUM_CHAN:0]chan_empty,
+    input [9:0]chan_usedw,
+    output reg [3:0]rd_select,
+    output reg chan_rdreq,
+    // FX2 side
+    output reg WR,
+    output reg [15:0]fifodata,
+    input have_space, 
+    input wire [31:0]rssi_0, input wire [31:0]rssi_1, input wire [31:0]rssi_2,
+    input wire [31:0]rssi_3, output wire [7:0] debugbus,
+    input [NUM_CHAN:0] underrun);
+    
+    
+    // States
+    `define IDLE                     3'd0
+    `define HEADER1                  3'd1
+    `define HEADER2                  3'd2
+    `define TIMESTAMP                3'd3
+    `define FORWARD                  3'd4
+	
+    `define MAXPAYLOAD 504
+    
+    `define PAYLOAD_LEN 8:0
+    `define TAG 12:9
+    `define MBZ 15:13
+    
+    `define CHAN 4:0
+    `define RSSI 10:5
+    `define BURST 12:11
+    `define DROPPED 13
+    `define UNDERRUN 14
+    `define OVERRUN 15
+    
+    reg [NUM_CHAN:0] overrun;
+    reg [2:0] state;
+    reg [8:0] read_length;
+    reg [8:0] payload_len;
+    reg timestamp_complete;
+    reg [3:0] check_next;
+	
+    wire [31:0] true_rssi;
+    wire [4:0] true_channel;
+    wire ready_to_send;
+
+    assign debugbus = {chan_empty[0], rd_select[0], have_space, 
+                       (chan_usedw >= 10'd504), (chan_usedw ==0),  
+                       ready_to_send, state[1:0]};
+
+    assign true_rssi = (rd_select[1]) ? ((rd_select[0]) ? rssi_3:rssi_2) :
+							((rd_select[0]) ? rssi_1:rssi_0);
+    assign true_channel = (check_next == 4'd0 ? 5'h1f : {1'd0, check_next - 4'd1});
+    assign ready_to_send = (chan_usedw >= 10'd504) || (chan_usedw == 0) || 
+                           ((rd_select == NUM_CHAN)&&(chan_usedw > 0));
+		
+    always @(posedge rxclk)
+    begin
+        if (reset)
+          begin
+            overrun <= 0;
+            WR <= 0;
+            rd_select <= 0;
+            chan_rdreq <= 0;
+            timestamp_complete <= 0;
+            check_next <= 0;
+            state <= `IDLE;
+          end
+        else case (state)
+            `IDLE: begin
+		chan_rdreq <= #1 0;
+		//check if the channel is full
+		if(~chan_empty[check_next])
+		  begin
+                    if (have_space)
+                      begin
+                        //transmit if the usb buffer have space
+                       //check if we should send
+                       if (ready_to_send)
+                           state <= #1 `HEADER1;
+						    
+                       overrun[check_next] <= 0;
+                      end
+                  else
+                    begin
+                      state <= #1 `IDLE;
+                      overrun[check_next] <= 1;
+                    end
+                  rd_select <= #1 check_next;
+                end
+                check_next <= #1 (check_next == channels ? 4'd0 : check_next + 4'd1);
+            end
+            
+            `HEADER1: begin
+                fifodata[`PAYLOAD_LEN] <= #1 9'd504;
+                payload_len <= #1 9'd504;
+                fifodata[`TAG] <= #1 0;
+                fifodata[`MBZ] <= #1 0;
+                WR <= #1 1;
+                
+                state <= #1 `HEADER2;
+                read_length <= #1 0;
+            end
+            
+            `HEADER2: begin
+                fifodata[`CHAN] <= #1 true_channel;
+                fifodata[`RSSI] <= #1 true_rssi[5:0];
+                fifodata[`BURST] <= #1 0;
+                fifodata[`DROPPED] <= #1 0;
+                fifodata[`UNDERRUN] <= #1 (check_next == 0) ? 1'b0 : underrun[true_channel];
+                fifodata[`OVERRUN] <= #1 (check_next == 0) ? 1'b0 : overrun[true_channel];
+                state <= #1 `TIMESTAMP;
+            end
+            
+            `TIMESTAMP: begin
+                fifodata <= #1 (timestamp_complete ? timestamp_clock[31:16] : timestamp_clock[15:0]);
+                timestamp_complete <= #1 ~timestamp_complete;
+                
+                if (~timestamp_complete)
+                    chan_rdreq <= #1 1;
+                
+                state <= #1 (timestamp_complete ? `FORWARD : `TIMESTAMP);
+            end
+            
+            `FORWARD: begin
+                read_length <= #1 read_length + 9'd2;
+                fifodata <= #1 (read_length >= payload_len ? 16'hDEAD : chan_fifodata);
+                
+                if (read_length >= `MAXPAYLOAD)
+                  begin
+                    WR <= #1 0;
+                    state <= #1 `IDLE;
+					chan_rdreq <= #1 0;
+                  end
+                else if (read_length == payload_len - 4)
+                    chan_rdreq <= #1 0;
+            end
+            
+            default: begin
+				//handling error state
+                state <= `IDLE;
+            end
+            endcase
+    end
+endmodule
+
diff --git a/usrp1/inband_lib/register_io.v b/usrp1/inband_lib/register_io.v
new file mode 100755
index 000000000..2b0cd1732
--- /dev/null
+++ b/usrp1/inband_lib/register_io.v
@@ -0,0 +1,82 @@
+module register_io
+	(clk, reset, enable, addr, datain, dataout, debugbus, addr_wr, data_wr, strobe_wr,
+	 rssi_0, rssi_1, rssi_2, rssi_3, threshhold, rssi_wait, reg_0, reg_1, reg_2, reg_3, 
+     debug_en, misc, txmux);   
+	
+	input clk;
+	input reset;
+	input wire [1:0] enable;
+	input wire [6:0] addr; 
+	input wire [31:0] datain;
+	output reg [31:0] dataout;
+	output wire [15:0] debugbus;
+	output reg [6:0] addr_wr;
+	output reg [31:0] data_wr;
+	output wire strobe_wr; 
+	input wire [31:0] rssi_0;
+	input wire [31:0] rssi_1;
+	input wire [31:0] rssi_2; 
+	input wire [31:0] rssi_3; 
+	output wire [31:0] threshhold;
+	output wire [31:0] rssi_wait;
+	input wire [15:0] reg_0;
+	input wire [15:0] reg_1; 
+	input wire [15:0] reg_2; 
+	input wire [15:0] reg_3;
+	input wire [3:0]  debug_en;
+	input wire [7:0]  misc;
+	input wire [31:0] txmux;
+	
+	reg strobe;
+	wire [31:0] out[2:1];
+	assign debugbus = {clk, enable, addr[2:0], datain[4:0], dataout[4:0]};
+	assign threshhold = out[1];
+	assign rssi_wait = out[2];
+	assign strobe_wr = strobe;
+	
+	always @(*)
+        if (reset | ~enable[1])
+           begin
+             strobe <= 0;
+		     dataout <= 0;
+		   end
+		else
+		   begin
+	         if (enable[0])
+	           begin
+	             //read
+				if (addr <= 7'd52 && addr > 7'd50)
+					dataout <= out[addr-7'd50];
+				else
+					dataout <= 32'hFFFFFFFF; 	
+	            strobe <= 0;
+              end
+             else
+               begin
+                 //write
+	             dataout <= dataout;
+                 strobe <= 1;
+				 data_wr <= datain;
+				 addr_wr <= addr;
+               end
+          end
+
+//register declarations
+    /*setting_reg #(50) setting_reg0(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[0]));*/
+    setting_reg #(51) setting_reg1(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[1]));
+    setting_reg #(52) setting_reg2(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[2]));
+    /*setting_reg #(53) setting_reg3(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[3]));
+    setting_reg #(54) setting_reg4(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[4]));
+    setting_reg #(55) setting_reg5(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[5]));
+    setting_reg #(56) setting_reg6(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[6]));
+    setting_reg #(57) setting_reg7(.clock(clk),.reset(reset),
+    .strobe(strobe_wr),.addr(addr_wr),.in(data_wr),.out(out[7]));*/
+
+endmodule	
diff --git a/usrp1/inband_lib/rx_buffer_inband.v b/usrp1/inband_lib/rx_buffer_inband.v
new file mode 100755
index 000000000..cbd2d8958
--- /dev/null
+++ b/usrp1/inband_lib/rx_buffer_inband.v
@@ -0,0 +1,209 @@
+//`include "../../firmware/include/fpga_regs_common.v"

+//`include "../../firmware/include/fpga_regs_standard.v"

+module rx_buffer_inband

+  ( input usbclk,

+    input bus_reset,

+    input reset,  // DSP side reset (used here), do not reset registers

+    input reset_regs, //Only reset registers

+    output [15:0] usbdata,

+    input RD,

+    output wire have_pkt_rdy,

+    output reg rx_overrun,

+    input wire [3:0] channels,

+    input wire [15:0] ch_0,

+    input wire [15:0] ch_1,

+    input wire [15:0] ch_2,

+    input wire [15:0] ch_3,

+    input wire [15:0] ch_4,

+    input wire [15:0] ch_5,

+    input wire [15:0] ch_6,

+    input wire [15:0] ch_7,

+    input rxclk,

+    input rxstrobe,

+    input clear_status,

+    input [6:0] serial_addr, 

+    input [31:0] serial_data, 

+    input serial_strobe,

+    output wire [15:0] debugbus,

+	

+    //Connection with tx_inband

+    input rx_WR,

+    input [15:0] rx_databus,

+    input rx_WR_done,

+    output reg rx_WR_enabled,

+    //signal strength

+    input wire [31:0] rssi_0, input wire [31:0] rssi_1,

+    input wire [31:0] rssi_2, input wire [31:0] rssi_3,

+    input wire [1:0] tx_underrun

+    );

+    

+    parameter NUM_CHAN = 1;

+    genvar i ;

+    

+    // FX2 Bug Fix

+    reg [8:0] read_count;

+    always @(negedge usbclk)

+        if(bus_reset)

+            read_count <= #1 9'd0;

+        else if(RD & ~read_count[8])

+            read_count <= #1 read_count + 9'd1;

+        else

+            read_count <= #1 RD ? read_count : 9'b0;

+       

+	// Time counter

+	reg [31:0] timestamp_clock;

+	always @(posedge rxclk)

+		if (reset)

+			timestamp_clock <= 0;

+		else

+			timestamp_clock <= timestamp_clock + 1;

+     

+  // USB side fifo

+  wire [11:0] rdusedw;

+  wire [11:0] wrusedw;

+  wire [15:0] fifodata;

+  wire [15:0] fifodata_il[0:NUM_CHAN];

+  wire WR;

+  wire have_space;

+  reg sel;

+  reg wr;

+

+  always@(posedge rxclk)

+    begin

+      if(reset)

+        begin

+          sel<=1;

+          wr<=0;

+        end

+      else if(rxstrobe)

+        begin

+          sel<=0;

+          wr<=1;

+        end

+      else if(wr&~sel)

+          sel<=1;

+      else if(wr&sel)

+          wr<=0;

+      else

+          wr<=0;

+    end

+

+  assign fifodata_il[0] = (sel)?ch_1:ch_0;

+  assign fifodata_il[1] = (sel)?ch_3:ch_2;

+

+  fifo_4kx16_dc	rx_usb_fifo (

+    .aclr ( reset ),

+    .data ( fifodata ),

+    .rdclk ( ~usbclk ),

+    .rdreq ( RD & ~read_count[8] ),

+    .wrclk ( rxclk ),

+    .wrreq ( WR ),

+    .q ( usbdata ),

+    .rdempty (  ),

+    .rdusedw ( rdusedw ),

+    .wrfull (  ),

+    .wrusedw ( wrusedw ) );

+    

+  assign have_pkt_rdy = (rdusedw >= 12'd256);

+  assign have_space = (wrusedw < 12'd760);

+	 

+  // Rx side fifos

+  // These are of size [NUM_CHAN:0] because the extra channel is used for the

+  // RX command channel.  If there were no command channel, they would be

+  // NUM_CHAN-1.

+  wire chan_rdreq;

+  wire [15:0] chan_fifodata;

+  wire [9:0] chan_usedw;

+  wire [NUM_CHAN:0] chan_empty;

+  wire [3:0] rd_select;

+  wire [NUM_CHAN:0] rx_full;

+	 

+  packet_builder #(NUM_CHAN) rx_pkt_builer (

+    .rxclk ( rxclk ),

+    .reset ( reset ),

+    .timestamp_clock ( timestamp_clock ),

+    .channels ( NUM_CHAN ),

+    .chan_rdreq ( chan_rdreq ),

+    .chan_fifodata ( chan_fifodata ),

+    .chan_empty ( chan_empty ),

+    .rd_select ( rd_select ),

+    .chan_usedw ( chan_usedw ),

+    .WR ( WR ),

+    .fifodata ( fifodata ),

+    .have_space ( have_space ),

+      .rssi_0(rssi_0), .rssi_1(rssi_1),

+      .rssi_2(rssi_2),.rssi_3(rssi_3), .debugbus(debug),

+      .underrun(tx_underrun));

+	 

+  // Detect overrun

+  always @(posedge rxclk)

+    if(reset)

+      rx_overrun <= 1'b0;

+    else if(rx_full[0])

+      rx_overrun <= 1'b1;

+    else if(clear_status)

+      rx_overrun <= 1'b0;

+

+		

+  // FIXME: what is the purpose of these two lines?

+  wire [15:0]ch[NUM_CHAN:0];

+  assign ch[0] = ch_0;

+	

+  wire cmd_empty;

+	

+  always @(posedge rxclk)

+    if(reset)

+      rx_WR_enabled <= 1;

+    else if(cmd_empty)

+      rx_WR_enabled <= 1;

+    else if(rx_WR_done)

+      rx_WR_enabled <= 0;

+

+

+  // Of Size 0:NUM_CHAN due to extra command channel.

+  wire [15:0] dataout [0:NUM_CHAN];

+  wire [9:0]  usedw	[0:NUM_CHAN];

+  wire empty[0:NUM_CHAN];

+	

+  generate for (i = 0 ; i < NUM_CHAN; i = i + 1)

+    begin : generate_channel_fifos

+

+      wire rdreq;

+

+      assign rdreq = (rd_select == i) & chan_rdreq;

+

+      fifo_1kx16 rx_chan_fifo (

+      .aclr ( reset ),

+      .clock ( rxclk ),

+      .data ( fifodata_il[i] ),

+      .rdreq ( rdreq ),

+      .wrreq ( ~rx_full[i] & wr),

+      .empty (empty[i]),

+      .full (rx_full[i]),

+      .q ( dataout[i]),

+      .usedw ( usedw[i]),

+      .almost_empty(chan_empty[i])

+      );

+    end

+  endgenerate

+	

+  wire [7:0] debug;

+	 

+  fifo_1kx16 rx_cmd_fifo (

+    .aclr ( reset ),

+    .clock ( rxclk ),

+    .data ( rx_databus ),

+    .rdreq ( (rd_select == NUM_CHAN) & chan_rdreq ),

+    .wrreq ( rx_WR & rx_WR_enabled),

+    .empty ( cmd_empty),

+    .full ( rx_full[NUM_CHAN] ),

+    .q ( dataout[NUM_CHAN]),

+    .usedw ( usedw[NUM_CHAN] )

+  );

+	

+  assign chan_empty[NUM_CHAN] = cmd_empty | rx_WR_enabled;

+  assign chan_fifodata = dataout[rd_select];

+  assign chan_usedw = usedw[rd_select];

+  assign debugbus = {4'd0, rxclk, rxstrobe, rx_full[0], rx_full[1], sel, wr};

+

+endmodule

diff --git a/usrp1/inband_lib/tx_buffer_inband.v b/usrp1/inband_lib/tx_buffer_inband.v
new file mode 100755
index 000000000..2dd75f42f
--- /dev/null
+++ b/usrp1/inband_lib/tx_buffer_inband.v
@@ -0,0 +1,143 @@
+module tx_buffer_inband
+  ( //System
+    input wire usbclk, input wire bus_reset, input wire reset, 
+    input wire [15:0] usbdata, output wire have_space, input wire [3:0] channels, 
+    //output transmit signals
+    output wire [15:0] tx_i_0, output wire [15:0] tx_q_0, 
+    output wire [15:0] tx_i_1, output wire [15:0] tx_q_1,
+    output wire [15:0] tx_i_2, output wire [15:0] tx_q_2, 
+    output wire [15:0] tx_i_3, output wire [15:0] tx_q_3, 
+    input wire txclk, input wire txstrobe, input wire WR,
+    input wire clear_status, output wire tx_empty, output wire [15:0] debugbus, 
+    //command reader io
+    output wire [15:0] rx_databus, output wire rx_WR, output wire rx_WR_done, 
+    input wire rx_WR_enabled,
+    //register io 
+    output wire [1:0] reg_io_enable, output wire [31:0] reg_data_in, output wire [6:0] reg_addr,
+    input wire [31:0] reg_data_out,  
+    //input characteristic signals
+    input wire [31:0] rssi_0, input wire [31:0] rssi_1, input wire [31:0] rssi_2, 
+    input wire [31:0] rssi_3, input wire [31:0] rssi_wait, input wire [31:0] threshhold, 
+    output wire [1:0] tx_underrun, 
+    //system stop
+    output wire stop, output wire [15:0] stop_time);
+	
+   parameter NUM_CHAN	 =      1 ;
+    
+   /* To generate channel readers */
+   genvar i ;
+    
+   /* These will eventually be external register */
+   reg                  [31:0] timestamp_clock ;
+   wire                 [7:0]  txstrobe_rate [NUM_CHAN-1:0] ;
+   wire			        [31:0] rssi [3:0];
+   assign rssi[0] = rssi_0;
+   assign rssi[1] = rssi_1;
+   assign rssi[2] = rssi_2;
+   assign rssi[3] = rssi_3;
+   
+   always @(posedge txclk)
+       if (reset)
+           timestamp_clock <= 0;
+       else
+           timestamp_clock <= timestamp_clock + 1;
+
+
+    /* Connections between tx_usb_fifo_reader and
+       cnannel/command processing blocks */
+   wire                  [31:0] tx_data_bus ;
+   wire            [NUM_CHAN:0] chan_WR ;
+   wire            [NUM_CHAN:0] chan_done ;
+    
+    /* Connections between data block and the
+       FX2/TX chains */
+   wire            [NUM_CHAN:0] chan_underrun;
+   wire            [NUM_CHAN:0] chan_txempty;
+   
+   /* Conections between tx_data_packet_fifo and
+       its reader + strobe generator */
+   wire                 [31:0] chan_fifodata [NUM_CHAN:0] ;
+   wire                        chan_pkt_waiting [NUM_CHAN:0] ;
+   wire                        chan_rdreq [NUM_CHAN:0] ;
+   wire                        chan_skip [NUM_CHAN:0] ;
+   wire                        chan_have_space [NUM_CHAN:0] ;
+
+   wire		            [14:0] debug [NUM_CHAN:0];
+    
+   /* Outputs to transmit chains */
+   wire                 [15:0] tx_i [NUM_CHAN:0] ;
+   wire                 [15:0] tx_q [NUM_CHAN:0] ;
+
+   assign tx_i[NUM_CHAN] = 0;
+   assign tx_q[NUM_CHAN] = 0;
+    
+   assign have_space = chan_have_space[0] & chan_have_space[1];
+   assign tx_empty = chan_txempty[0] & chan_txempty[1] ;
+
+   assign tx_i_0 = chan_txempty[0] ? 16'b0 : tx_i[0] ;
+   assign tx_q_0 = chan_txempty[0] ? 16'b0 : tx_q[0] ;
+   assign tx_i_1 = chan_txempty[1] ? 16'b0 : tx_i[1] ;
+   assign tx_q_1 = chan_txempty[1] ? 16'b0 : tx_q[1] ;
+        
+   assign tx_q_2 = 16'b0 ;
+   assign tx_i_2 = 16'b0 ;
+   assign tx_q_3 = 16'b0 ;
+   assign tx_i_3 = 16'b0 ;
+   assign tx_i_3 = 16'b0 ;
+	
+   assign debugbus = {have_space, txclk, WR, WR_final, chan_WR, chan_done, 
+                      chan_pkt_waiting[0], chan_pkt_waiting[1],
+                      chan_rdreq[0], chan_rdreq[1], chan_txempty[0], chan_txempty[1]};
+
+   wire [31:0] usbdata_final;
+   wire		WR_final;
+
+   tx_packer tx_usb_packer
+   (.bus_reset(bus_reset), .usbclk(usbclk), .WR_fx2(WR),
+    .usbdata(usbdata), .reset(reset), .txclk(txclk),
+    .usbdata_final(usbdata_final), .WR_final(WR_final));
+	
+   channel_demux #(NUM_CHAN) channel_demuxer
+   (.usbdata_final(usbdata_final), .WR_final(WR_final),
+    .reset(reset), .txclk(txclk), .WR_channel(chan_WR),
+    .WR_done_channel(chan_done), .ram_data(tx_data_bus));
+	
+   generate for (i = 0 ; i < NUM_CHAN; i = i + 1)
+     begin : generate_channel_readers
+       assign tx_underrun[i] = chan_underrun[i];
+
+       channel_ram tx_data_packet_fifo 
+       (.reset(reset), .txclk(txclk), .datain(tx_data_bus),
+        .WR(chan_WR[i]), .WR_done(chan_done[i]),
+        .have_space(chan_have_space[i]), .dataout(chan_fifodata[i]),
+        .packet_waiting(chan_pkt_waiting[i]), .RD(chan_rdreq[i]),
+        .RD_done(chan_skip[i]));
+
+       chan_fifo_reader tx_chan_reader 
+       (.reset(reset), .tx_clock(txclk), .tx_strobe(txstrobe),
+        .timestamp_clock(timestamp_clock), .samples_format(4'b0),          
+        .tx_q(tx_q[i]), .tx_i(tx_i[i]), .underrun(chan_underrun[i]),
+        .skip(chan_skip[i]), .rdreq(chan_rdreq[i]),
+        .fifodata(chan_fifodata[i]), .pkt_waiting(chan_pkt_waiting[i]),
+        .tx_empty(chan_txempty[i]), .rssi(rssi[i]), .debug(debug[i]),
+        .threshhold(threshhold), .rssi_wait(rssi_wait));	         
+    end
+    endgenerate
+
+
+   channel_ram tx_cmd_packet_fifo 
+   (.reset(reset), .txclk(txclk), .datain(tx_data_bus), .WR(chan_WR[NUM_CHAN]),
+    .WR_done(chan_done[NUM_CHAN]), .have_space(chan_have_space[NUM_CHAN]),
+    .dataout(chan_fifodata[NUM_CHAN]), .packet_waiting(chan_pkt_waiting[NUM_CHAN]),
+    .RD(chan_rdreq[NUM_CHAN]), .RD_done(chan_skip[NUM_CHAN]));
+
+   cmd_reader tx_cmd_reader
+   (.reset(reset), .txclk(txclk), .timestamp_clock(timestamp_clock), .skip(chan_skip[NUM_CHAN]),
+    .rdreq(chan_rdreq[NUM_CHAN]), .fifodata(chan_fifodata[NUM_CHAN]),
+    .pkt_waiting(chan_pkt_waiting[NUM_CHAN]), .rx_databus(rx_databus),
+    .rx_WR(rx_WR), .rx_WR_done(rx_WR_done), .rx_WR_enabled(rx_WR_enabled),
+    .reg_data_in(reg_data_in), .reg_data_out(reg_data_out), .reg_addr(reg_addr),
+    .reg_io_enable(reg_io_enable), .debug(debug[NUM_CHAN]), .stop(stop), .stop_time(stop_time));
+				   
+endmodule // tx_buffer
+
diff --git a/usrp1/inband_lib/tx_packer.v b/usrp1/inband_lib/tx_packer.v
new file mode 100644
index 000000000..2f19b21f3
--- /dev/null
+++ b/usrp1/inband_lib/tx_packer.v
@@ -0,0 +1,119 @@
+module tx_packer
+   (     //FX2 Side
+			input bus_reset, 
+			input usbclk, 
+			input WR_fx2, 
+			input [15:0]usbdata,
+			
+			// TX Side
+			input reset,
+			input txclk,
+			output reg [31:0] usbdata_final,
+			output reg WR_final);
+
+	reg [8:0] write_count;
+
+	/* Fix FX2 bug */
+	always @(posedge usbclk)
+	begin
+    	if(bus_reset)        // Use bus reset because this is on usbclk
+       		write_count <= #1 0;
+    	else if(WR_fx2 & ~write_count[8])
+    		write_count <= #1 write_count + 9'd1;
+    	else
+    		write_count <= #1 WR_fx2 ? write_count : 9'b0;
+	end
+	
+	reg WR_fx2_fixed;
+	reg [15:0]usbdata_fixed;
+	
+	always @(posedge usbclk) 
+	begin
+	   WR_fx2_fixed <= WR_fx2 & ~write_count[8];
+	   usbdata_fixed <= usbdata;
+	end
+
+	/* Used to convert 16 bits bus_data to the 32 bits wide fifo */
+    reg                             word_complete ;
+    reg     [15:0]         			usbdata_delayed ;
+    reg                             writing ;
+	wire	[31:0]					usbdata_packed ;    
+	wire							WR_packed ;
+   
+    always @(posedge usbclk)
+    begin
+        if (bus_reset)
+          begin
+            word_complete <= 0 ;
+            writing <= 0 ;
+          end
+        else if (WR_fx2_fixed)
+          begin
+            writing <= 1 ;
+            if (word_complete)
+                word_complete <= 0 ;
+            else
+              begin
+                usbdata_delayed <= usbdata_fixed ;
+                word_complete <= 1 ;
+              end
+          end
+        else
+            writing <= 0 ;
+	end
+    
+	assign usbdata_packed = {usbdata_fixed, usbdata_delayed} ;
+    assign WR_packed = word_complete & writing ;
+
+	/* Make sure data are sync with usbclk */
+ 	reg [31:0]usbdata_usbclk;
+	reg WR_usbclk; 
+    
+    always @(posedge usbclk)
+    begin
+    	if (WR_packed)
+    		usbdata_usbclk <= usbdata_packed;
+        WR_usbclk <= WR_packed;
+    end
+
+	/* Cross clock boundaries */
+	reg [31:0] usbdata_tx ;
+	reg WR_tx;
+    reg WR_1;
+    reg WR_2;
+  
+	always @(posedge txclk) usbdata_tx <= usbdata_usbclk;
+
+    always @(posedge txclk) 
+    	if (reset)
+    		WR_1 <= 0;
+    	else
+       		WR_1 <= WR_usbclk;
+
+    always @(posedge txclk) 
+    	if (reset)
+       		WR_2 <= 0;
+    	else
+      		WR_2 <= WR_1;
+
+	always @(posedge txclk)
+	begin
+		if (reset)
+			WR_tx <= 0;
+		else
+		   WR_tx <= WR_1 & ~WR_2;
+	end
+	
+	always @(posedge txclk)
+	begin
+	   if (reset)
+	      WR_final <= 0;
+	   else
+	   begin
+	      WR_final <= WR_tx; 
+	      if (WR_tx)
+	         usbdata_final <= usbdata_tx;
+	   end
+	end
+
+endmodule
diff --git a/usrp1/inband_lib/usb_packet_fifo.v b/usrp1/inband_lib/usb_packet_fifo.v
new file mode 100755
index 000000000..c416e2bdb
--- /dev/null
+++ b/usrp1/inband_lib/usb_packet_fifo.v
@@ -0,0 +1,112 @@
+module usb_packet_fifo 
+  ( input       reset,
+    input       clock_in,
+    input       clock_out,
+    input       [15:0]ram_data_in,
+    input       write_enable,
+    output  reg [15:0]ram_data_out,
+    output  reg pkt_waiting,
+    output  reg have_space,
+    input       read_enable,
+    input       skip_packet          ) ;
+
+    /* Some parameters for usage later on */
+    parameter DATA_WIDTH = 16 ;
+    parameter NUM_PACKETS = 4 ;
+
+    /* Create the RAM here */
+    reg [DATA_WIDTH-1:0] usb_ram [256*NUM_PACKETS-1:0] ;
+
+    /* Create the address signals */
+    reg [7-2+NUM_PACKETS:0] usb_ram_ain ;
+    reg [7:0] usb_ram_offset ;
+    reg [1:0] usb_ram_packet ;
+
+    wire [7-2+NUM_PACKETS:0] usb_ram_aout ;
+    reg isfull;
+
+    assign usb_ram_aout = {usb_ram_packet,usb_ram_offset} ;
+    
+    // Check if there is one full packet to process
+    always @(usb_ram_ain, usb_ram_aout)
+    begin
+        if (reset)
+            pkt_waiting <= 0;
+        else if (usb_ram_ain == usb_ram_aout)
+            pkt_waiting <= isfull;
+        else if (usb_ram_ain > usb_ram_aout)
+            pkt_waiting <= (usb_ram_ain - usb_ram_aout) >= 256;
+        else
+            pkt_waiting <= (usb_ram_ain + 10'b1111111111 - usb_ram_aout) >= 256;
+    end
+    
+    // Check if there is room
+    always @(usb_ram_ain, usb_ram_aout)
+    begin
+        if (reset)
+            have_space <= 1;
+        else if (usb_ram_ain == usb_ram_aout)
+            have_space <= ~isfull;   
+        else if (usb_ram_ain > usb_ram_aout)
+            have_space <= (usb_ram_ain - usb_ram_aout) <= 256 * (NUM_PACKETS - 1);
+        else
+            have_space <= (usb_ram_aout - usb_ram_ain) >= 256;
+    end
+
+    /* RAM Write Address process */
+    always @(posedge clock_in)
+    begin
+        if( reset )
+            usb_ram_ain <= 0 ;
+        else
+            if( write_enable ) 
+              begin
+                usb_ram_ain <= usb_ram_ain + 1 ;
+                if (usb_ram_ain + 1 == usb_ram_aout)
+                   isfull <= 1;
+              end
+    end
+
+    /* RAM Writing process */
+    always @(posedge clock_in)
+    begin
+        if( write_enable ) 
+          begin
+            usb_ram[usb_ram_ain] <= ram_data_in ;
+          end
+    end
+
+    /* RAM Read Address process */
+    always @(posedge clock_out)
+    begin
+        if( reset ) 
+          begin
+            usb_ram_packet <= 0 ;
+            usb_ram_offset <= 0 ;
+            isfull <= 0;
+          end
+        else
+            if( skip_packet )
+              begin
+                usb_ram_packet <= usb_ram_packet + 1 ;
+                usb_ram_offset <= 0 ;
+              end
+            else if(read_enable)
+                if( usb_ram_offset == 8'b11111111 )
+                  begin
+                    usb_ram_offset <= 0 ;
+                    usb_ram_packet <= usb_ram_packet + 1 ;
+                  end
+                else
+                    usb_ram_offset <= usb_ram_offset + 1 ;
+            if (usb_ram_ain == usb_ram_aout)
+               isfull <= 0;                       
+    end
+
+    /* RAM Reading Process */
+    always @(posedge clock_out)
+    begin
+        ram_data_out <= usb_ram[usb_ram_aout] ;
+    end
+
+endmodule
\ No newline at end of file