Houston, we have a trunk.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@3122 221aa14e-8319-0410-a670-987f0aec2ac5

5 files changed, 460 insertions, 0 deletions

diff --git a/toplevel/sizetest/sizetest.csf b/toplevel/sizetest/sizetest.csf
new file mode 100644
index 000000000..4b724e7f5
--- /dev/null
+++ b/toplevel/sizetest/sizetest.csf
@@ -0,0 +1,160 @@
+COMPILER_SETTINGS
+{
+	IO_PLACEMENT_OPTIMIZATION = OFF;
+	ENABLE_DRC_SETTINGS = OFF;
+	PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF;
+	PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF;
+	PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF;
+	DRC_FANOUT_EXCEEDING = 30;
+	DRC_REPORT_FANOUT_EXCEEDING = OFF;
+	DRC_TOP_FANOUT = 50;
+	DRC_REPORT_TOP_FANOUT = OFF;
+	RUN_DRC_DURING_COMPILATION = OFF;
+	ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON;
+	ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF;
+	ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF;
+	ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF;
+	SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF;
+	MERGE_HEX_FILE = OFF;
+	TRUE_WYSIWYG_FLOW = OFF;
+	SEED = 1;
+	FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY;
+	FAMILY = Cyclone;
+	DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+	DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1";
+	DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1";
+	DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+	DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1";
+	DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1";
+	DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+	DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
+	DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
+	DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+	DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+	DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
+	DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
+	DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
+	DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
+	DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB";
+	DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3";
+	DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+	DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+	DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4";
+	DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3";
+	DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS";
+	DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS";
+	DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS";
+	STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
+	PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
+	PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2";
+	STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1";
+	FAST_FIT_COMPILATION = OFF;
+	SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF;
+	OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = OFF;
+	OPTIMIZE_TIMING = OFF;
+	OPTIMIZE_HOLD_TIMING = OFF;
+	COMPILATION_LEVEL = FULL;
+	SAVE_DISK_SPACE = ON;
+	SPEED_DISK_USAGE_TRADEOFF = NORMAL;
+	LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF;
+	SIGNALPROBE_ALLOW_OVERUSE = OFF;
+	FOCUS_ENTITY_NAME = |sizetest;
+	FIT_ONLY_ONE_ATTEMPT = OFF;
+}
+DEFAULT_DEVICE_OPTIONS
+{
+	GENERATE_CONFIG_HEXOUT_FILE = OFF;
+	GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON;
+	GENERATE_CONFIG_JBC_FILE = OFF;
+	GENERATE_CONFIG_JAM_FILE = OFF;
+	GENERATE_CONFIG_ISC_FILE = OFF;
+	GENERATE_CONFIG_SVF_FILE = OFF;
+	GENERATE_JBC_FILE_COMPRESSED = ON;
+	GENERATE_JBC_FILE = OFF;
+	GENERATE_JAM_FILE = OFF;
+	GENERATE_ISC_FILE = OFF;
+	GENERATE_SVF_FILE = OFF;
+	RESERVE_PIN = "AS INPUT TRI-STATED";
+	RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND";
+	HEXOUT_FILE_COUNT_DIRECTION = UP;
+	HEXOUT_FILE_START_ADDRESS = 0;
+	GENERATE_HEX_FILE = OFF;
+	GENERATE_RBF_FILE = OFF;
+	GENERATE_TTF_FILE = OFF;
+	RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+	RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED";
+	RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+	RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+	RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+	DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF;
+	AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON;
+	EPROM_USE_CHECKSUM_AS_USERCODE = OFF;
+	FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+	MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+	STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+	APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+	STRATIX_CONFIGURATION_DEVICE = AUTO;
+	CYCLONE_CONFIGURATION_DEVICE = AUTO;
+	FLEX10K_CONFIGURATION_DEVICE = AUTO;
+	FLEX6K_CONFIGURATION_DEVICE = AUTO;
+	MERCURY_CONFIGURATION_DEVICE = AUTO;
+	EXCALIBUR_CONFIGURATION_DEVICE = AUTO;
+	APEX20K_CONFIGURATION_DEVICE = AUTO;
+	USE_CONFIGURATION_DEVICE = ON;
+	ENABLE_INIT_DONE_OUTPUT = OFF;
+	FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
+	ENABLE_DEVICE_WIDE_OE = OFF;
+	ENABLE_DEVICE_WIDE_RESET = OFF;
+	RELEASE_CLEARS_BEFORE_TRI_STATES = OFF;
+	AUTO_RESTART_CONFIGURATION = OFF;
+	ENABLE_VREFB_PIN = OFF;
+	ENABLE_VREFA_PIN = OFF;
+	SECURITY_BIT = OFF;
+	USER_START_UP_CLOCK = OFF;
+	APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+	FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+	FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+	MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+	EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+	CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL";
+	STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+	APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+	STRATIX_UPDATE_MODE = STANDARD;
+	USE_CHECKSUM_AS_USERCODE = OFF;
+	MAX7000_USE_CHECKSUM_AS_USERCODE = OFF;
+	MAX7000_JTAG_USER_CODE = FFFFFFFF;
+	FLEX10K_JTAG_USER_CODE = 7F;
+	MERCURY_JTAG_USER_CODE = FFFFFFFF;
+	APEX20K_JTAG_USER_CODE = FFFFFFFF;
+	STRATIX_JTAG_USER_CODE = FFFFFFFF;
+	MAX7000S_JTAG_USER_CODE = FFFF;
+	RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+	FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+	FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF;
+	ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+	MAX7000_ENABLE_JTAG_BST_SUPPORT = ON;
+	ENABLE_JTAG_BST_SUPPORT = OFF;
+	CONFIGURATION_CLOCK_DIVISOR = 1;
+	CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ";
+	CLOCK_SOURCE = INTERNAL;
+	COMPRESSION_MODE = OFF;
+	ON_CHIP_BITSTREAM_DECOMPRESSION = OFF;
+}
+AUTO_SLD_HUB_ENTITY
+{
+	AUTO_INSERT_SLD_HUB_ENTITY = ENABLE;
+	HUB_INSTANCE_NAME = SLD_HUB_INST;
+	HUB_ENTITY_NAME = SLD_HUB;
+}
+CHIP(sizetest)
+{
+	DEVICE = EP1C12Q240C8;
+	DEVICE_FILTER_PACKAGE = "ANY QFP";
+	DEVICE_FILTER_PIN_COUNT = 240;
+	DEVICE_FILTER_SPEED_GRADE = ANY;
+}
+SIGNALTAP_LOGIC_ANALYZER_SETTINGS
+{
+	ENABLE_SIGNALTAP = Off;
+	AUTO_ENABLE_SMART_COMPILE = On;
+}
diff --git a/toplevel/sizetest/sizetest.psf b/toplevel/sizetest/sizetest.psf
new file mode 100644
index 000000000..e4fc6aa27
--- /dev/null
+++ b/toplevel/sizetest/sizetest.psf
@@ -0,0 +1,228 @@
+DEFAULT_DESIGN_ASSISTANT_SETTINGS
+{
+	HCPY_ALOAD_SIGNALS = OFF;
+	HCPY_VREF_PINS = OFF;
+	HCPY_CAT = OFF;
+	HCPY_ILLEGAL_HC_DEV_PKG = OFF;
+	ACLK_RULE_IMSZER_ADOMAIN = OFF;
+	ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF;
+	ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF;
+	ACLK_CAT = OFF;
+	SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF;
+	SIGNALRACE_CAT = OFF;
+	NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF;
+	NONSYNCHSTRUCT_RULE_SRLATCH = OFF;
+	NONSYNCHSTRUCT_RULE_DLATCH = OFF;
+	NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF;
+	NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF;
+	NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF;
+	NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF;
+	NONSYNCHSTRUCT_RULE_REG_LOOP = OFF;
+	NONSYNCHSTRUCT_RULE_COMBLOOP = OFF;
+	NONSYNCHSTRUCT_CAT = OFF;
+	NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF;
+	TIMING_RULE_COIN_CLKEDGE = OFF;
+	TIMING_RULE_SHIFT_REG = OFF;
+	TIMING_RULE_HIGH_FANOUTS = OFF;
+	TIMING_CAT = OFF;
+	RESET_RULE_ALL = OFF;
+	RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF;
+	RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF;
+	RESET_RULE_REG_ASNYCH = OFF;
+	RESET_RULE_COMB_ASYNCH_RESET = OFF;
+	RESET_RULE_IMSYNCH_EXRESET = OFF;
+	RESET_RULE_UNSYNCH_EXRESET = OFF;
+	RESET_RULE_INPINS_RESETNET = OFF;
+	RESET_CAT = OFF;
+	CLK_RULE_ALL = OFF;
+	CLK_RULE_MIX_EDGES = OFF;
+	CLK_RULE_CLKNET_CLKSPINES = OFF;
+	CLK_RULE_INPINS_CLKNET = OFF;
+	CLK_RULE_GATING_SCHEME = OFF;
+	CLK_RULE_INV_CLOCK = OFF;
+	CLK_RULE_COMB_CLOCK = OFF;
+	CLK_CAT = OFF;
+	HCPY_EXCEED_USER_IO_USAGE = OFF;
+	HCPY_EXCEED_RAM_USAGE = OFF;
+	NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF;
+	SIGNALRACE_RULE_TRISTATE = OFF;
+	ASSG_RULE_MISSING_TIMING = OFF;
+	ASSG_RULE_MISSING_FMAX = OFF;
+	ASSG_CAT = OFF;
+}
+SYNTHESIS_FITTING_SETTINGS
+{
+	AUTO_SHIFT_REGISTER_RECOGNITION = ON;
+	AUTO_RAM_RECOGNITION = ON;
+	REMOVE_DUPLICATE_LOGIC = ON;
+	AUTO_MERGE_PLLS = ON;
+	AUTO_OPEN_DRAIN_PINS = ON;
+	AUTO_CARRY_CHAINS = ON;
+	AUTO_DELAY_CHAINS = ON;
+	STRATIX_CARRY_CHAIN_LENGTH = 70;
+	AUTO_PACKED_REG_CYCLONE = "MINIMIZE AREA WITH CHAINS";
+	CYCLONE_OPTIMIZATION_TECHNIQUE = SPEED;
+	AUTO_GLOBAL_MEMORY_CONTROLS = OFF;
+	AUTO_GLOBAL_REGISTER_CONTROLS = ON;
+	AUTO_GLOBAL_CLOCK = ON;
+	LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF;
+	ENABLE_BUS_HOLD_CIRCUITRY = OFF;
+	WEAK_PULL_UP_RESISTOR = OFF;
+	IGNORE_SOFT_BUFFERS = ON;
+	IGNORE_LCELL_BUFFERS = OFF;
+	IGNORE_ROW_GLOBAL_BUFFERS = OFF;
+	IGNORE_GLOBAL_BUFFERS = OFF;
+	IGNORE_CASCADE_BUFFERS = OFF;
+	IGNORE_CARRY_BUFFERS = OFF;
+	REMOVE_DUPLICATE_REGISTERS = ON;
+	REMOVE_REDUNDANT_LOGIC_CELLS = OFF;
+	ALLOW_POWER_UP_DONT_CARE = ON;
+	PCI_IO = OFF;
+	NOT_GATE_PUSH_BACK = ON;
+	SLOW_SLEW_RATE = OFF;
+	STATE_MACHINE_PROCESSING = AUTO;
+}
+DEFAULT_HARDCOPY_SETTINGS
+{
+	HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS";
+}
+DEFAULT_TIMING_REQUIREMENTS
+{
+	INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+	RUN_ALL_TIMING_ANALYSES = ON;
+	IGNORE_CLOCK_SETTINGS = OFF;
+	DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE";
+	CUT_OFF_IO_PIN_FEEDBACK = ON;
+	CUT_OFF_CLEAR_AND_PRESET_PATHS = ON;
+	CUT_OFF_READ_DURING_WRITE_PATHS = ON;
+	CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON;
+	DO_MIN_ANALYSIS = ON;
+	DO_MIN_TIMING = OFF;
+	NUMBER_OF_PATHS_TO_REPORT = 200;
+	NUMBER_OF_DESTINATION_TO_REPORT = 10;
+	NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10;
+	MAX_SCC_SIZE = 50;
+}
+HDL_SETTINGS
+{
+	VERILOG_INPUT_VERSION = VERILOG_2001;
+	ENABLE_IP_DEBUG = OFF;
+	VHDL_INPUT_VERSION = VHDL93;
+	VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF;
+}
+PROJECT_INFO(sizetest)
+{
+	USER_LIBRARIES = "e:\fpga\megacells\";
+	ORIGINAL_QUARTUS_VERSION = 3.0;
+	PROJECT_CREATION_TIME_DATE = "22:00:25  SEPTEMBER 28, 2003";
+	LAST_QUARTUS_VERSION = 3.0;
+	SHOW_REGISTRATION_MESSAGE = ON;
+}
+THIRD_PARTY_EDA_TOOLS(sizetest)
+{
+	EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>";
+	EDA_SIMULATION_TOOL = "<NONE>";
+	EDA_TIMING_ANALYSIS_TOOL = "<NONE>";
+	EDA_BOARD_DESIGN_TOOL = "<NONE>";
+	EDA_FORMAL_VERIFICATION_TOOL = "<NONE>";
+	EDA_RESYNTHESIS_TOOL = "<NONE>";
+}
+EDA_TOOL_SETTINGS(eda_design_synthesis)
+{
+	EDA_INPUT_GND_NAME = GND;
+	EDA_INPUT_VCC_NAME = VCC;
+	EDA_SHOW_LMF_MAPPING_MESSAGES = OFF;
+	EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+	EDA_INPUT_DATA_FORMAT = EDIF;
+	EDA_OUTPUT_DATA_FORMAT = NONE;
+	USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+	RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+	RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+	RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_simulation)
+{
+	EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+	EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+	EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+	EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+	EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+	EDA_FLATTEN_BUSES = OFF;
+	EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+	EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+	EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+	EDA_OUTPUT_DATA_FORMAT = NONE;
+	USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+	RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+	RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+	RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_timing_analysis)
+{
+	EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+	EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+	EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+	EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+	EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+	EDA_FLATTEN_BUSES = OFF;
+	EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+	EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+	EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+	EDA_OUTPUT_DATA_FORMAT = NONE;
+	EDA_LAUNCH_CMD_LINE_TOOL = OFF;
+	USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+	RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+	RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+	RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_board_design)
+{
+	EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+	EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+	EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+	EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+	EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+	EDA_FLATTEN_BUSES = OFF;
+	EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+	EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+	EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+	EDA_OUTPUT_DATA_FORMAT = NONE;
+	USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+	RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+	RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+	RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_formal_verification)
+{
+	EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+	EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+	EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+	EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+	EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+	EDA_FLATTEN_BUSES = OFF;
+	EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+	EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+	EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+	EDA_OUTPUT_DATA_FORMAT = NONE;
+	USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+	RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+	RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+	RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_palace)
+{
+	EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+	EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+	EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+	EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+	EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+	EDA_FLATTEN_BUSES = OFF;
+	EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+	EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+	EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+	EDA_OUTPUT_DATA_FORMAT = NONE;
+	RESYNTHESIS_RETIMING = FULL;
+	RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+	RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+	USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+}
diff --git a/toplevel/sizetest/sizetest.quartus b/toplevel/sizetest/sizetest.quartus
new file mode 100644
index 000000000..d1eaf227a
--- /dev/null
+++ b/toplevel/sizetest/sizetest.quartus
@@ -0,0 +1,19 @@
+COMPILER_SETTINGS_LIST
+{
+	COMPILER_SETTINGS = sizetest;
+}
+SIMULATOR_SETTINGS_LIST
+{
+	SIMULATOR_SETTINGS = sizetest;
+}
+SOFTWARE_SETTINGS_LIST
+{
+	SOFTWARE_SETTINGS = Debug;
+	SOFTWARE_SETTINGS = Release;
+}
+FILES
+{
+	VERILOG_FILE = ..\..\sdr_lib\cordic_stage.v;
+	VERILOG_FILE = ..\..\sdr_lib\cordic.v;
+	VERILOG_FILE = sizetest.v;
+}
diff --git a/toplevel/sizetest/sizetest.ssf b/toplevel/sizetest/sizetest.ssf
new file mode 100644
index 000000000..1aceab1f1
--- /dev/null
+++ b/toplevel/sizetest/sizetest.ssf
@@ -0,0 +1,14 @@
+SIMULATOR_SETTINGS
+{
+	ESTIMATE_POWER_CONSUMPTION = OFF;
+	GLITCH_INTERVAL = 1NS;
+	GLITCH_DETECTION = OFF;
+	SIMULATION_COVERAGE = ON;
+	CHECK_OUTPUTS = OFF;
+	SETUP_HOLD_DETECTION = OFF;
+	POWER_ESTIMATION_START_TIME = "0 NS";
+	ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON;
+	SIMULATION_MODE = TIMING;
+	START_TIME = 0NS;
+	USE_COMPILER_SETTINGS = sizetest;
+}
diff --git a/toplevel/sizetest/sizetest.v b/toplevel/sizetest/sizetest.v
new file mode 100644
index 000000000..cdbd0861a
--- /dev/null
+++ b/toplevel/sizetest/sizetest.v
@@ -0,0 +1,39 @@
+// -*- verilog -*-
+//
+//  USRP - Universal Software Radio Peripheral
+//
+//  Copyright (C) 2003 Matt Ettus
+//
+//  This program is free software; you can redistribute it and/or modify
+//  it under the terms of the GNU General Public License as published by
+//  the Free Software Foundation; either version 2 of the License, or
+//  (at your option) any later version.
+//
+//  This program is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//  GNU General Public License for more details.
+//
+//  You should have received a copy of the GNU General Public License
+//  along with this program; if not, write to the Free Software
+//  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+//
+
+
+module sizetest(input clock, 
+				input reset, 
+				input enable, 
+				input [15:0]xi, 
+				input [15:0] yi, 
+				input [15:0] zi, 
+				output [15:0] xo, 
+				output [15:0] yo,
+				output [15:0] zo
+//				input [15:0] constant 
+				);
+
+wire [16:0] zo;
+
+cordic_stage cordic_stage(clock, reset, enable, xi, yi, zi, 16'd16383, xo, yo, zo );
+
+endmodule