Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 110 insertions, 0 deletions

diff --git a/timing/time_sync.v b/timing/time_sync.v
new file mode 100644
index 000000000..990674c61
--- /dev/null
+++ b/timing/time_sync.v
@@ -0,0 +1,110 @@
+
+
+module time_sync
+  (input wb_clk_i, input rst_i,
+   input cyc_i, input stb_i, input [2:0] adr_i,
+   input we_i, input [31:0] dat_i, output [31:0] dat_o, output ack_o,
+   input sys_clk_i, output [31:0] master_time_o,
+   input pps_in, input exp_pps_in, output exp_pps_out,
+   output reg int_o );
+   
+   wire [31:0] master_time_rcvd;
+   reg [31:0]  master_time;
+   reg [31:0]  delta_time;
+
+   reg 	       internal_tick;
+   wire        sync_rcvd, pps_ext;
+   reg [31:0]  tick_time, tick_time_wb;
+   wire        tick_free_run;
+   reg 	       tick_int_enable, tick_source, external_sync;
+   reg [31:0]  tick_interval;
+   
+   // Generate master time
+   always @(posedge sys_clk_i)
+     if(rst_i)
+       master_time <= 0;
+     else if(external_sync & sync_rcvd)
+       master_time <= master_time_rcvd + delta_time;
+     else
+       master_time <= master_time + 1;
+   assign      master_time_o = master_time;
+   
+   time_sender time_sender
+     (.clk(sys_clk_i),.rst(rst_i),
+      .master_time(master_time),
+      .send_sync(internal_tick),
+      .exp_pps_out(exp_pps_out) );
+
+   time_receiver time_receiver
+     (.clk(sys_clk_i),.rst(rst_i),
+      .master_time(master_time_rcvd),
+      .sync_rcvd(sync_rcvd),
+      .exp_pps_in(exp_pps_in) );
+
+   assign     ack_o = stb_i;
+
+   always @(posedge wb_clk_i)
+     if(rst_i)
+       begin
+	  tick_source <= 0;
+	  tick_int_enable <= 0;
+	  external_sync <= 0;
+	  tick_interval <= 100000-1;  // default to 1K times per second
+	  delta_time <= 0;
+       end
+     else if(stb_i & we_i)
+       if(adr_i[2:0] == 2)
+	 delta_time <= dat_i;
+       else if(adr_i[2:0] == 1)
+	 tick_interval <= dat_i;
+       else
+	 begin
+	    tick_source <= dat_i[0];
+	    tick_int_enable <= dat_i[1];
+	    external_sync <= dat_i[2];
+	 end
+   
+   always @(posedge sys_clk_i)
+     if(internal_tick)
+       tick_time <= master_time;
+
+   always @(posedge wb_clk_i)
+     tick_time_wb <= tick_time;
+   
+   assign dat_o = tick_time_wb;
+
+   always @(posedge sys_clk_i)
+     internal_tick <= (tick_source == 0) ? tick_free_run : pps_ext;
+
+   reg [31:0] counter;
+   always @(posedge sys_clk_i)
+     if(rst_i)
+       counter <= 0;
+     else if(tick_free_run)
+       counter <= 0;
+     else
+       counter <= counter + 1;
+   assign     tick_free_run = (counter >= tick_interval);
+   
+   // Properly Latch and edge detect External PPS input
+   reg 	      pps_in_d1, pps_in_d2;
+   always @(posedge sys_clk_i)
+     begin
+	pps_in_d1 <= pps_in;
+	pps_in_d2 <= pps_in_d1;
+     end
+   assign pps_ext = pps_in_d1 & ~pps_in_d2;
+
+   // Need to register this?
+   reg 	  internal_tick_d1;
+   always @(posedge sys_clk_i) internal_tick_d1 <= internal_tick;
+   
+   always @(posedge wb_clk_i)
+     if(rst_i)
+       int_o <= 0;
+     else if(tick_int_enable & (internal_tick | internal_tick_d1))
+       int_o <= 1;
+     else
+       int_o <= 0;
+   
+endmodule // time_sync