removed unused/out-of-date bus_interface.v

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@4277 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 0 insertions, 213 deletions

diff --git a/sdr_lib/bus_interface.v b/sdr_lib/bus_interface.v
deleted file mode 100755
index b326889c0..000000000
--- a/sdr_lib/bus_interface.v
+++ /dev/null
@@ -1,213 +0,0 @@
-// -*- verilog -*-
-//
-//  USRP - Universal Software Radio Peripheral
-//
-//  Copyright (C) 2003 Matt Ettus
-//
-//  This program is free software; you can redistribute it and/or modify
-//  it under the terms of the GNU General Public License as published by
-//  the Free Software Foundation; either version 2 of the License, or
-//  (at your option) any later version.
-//
-//  This program is distributed in the hope that it will be useful,
-//  but WITHOUT ANY WARRANTY; without even the implied warranty of
-//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//  GNU General Public License for more details.
-//
-//  You should have received a copy of the GNU General Public License
-//  along with this program; if not, write to the Free Software
-//  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
-//
-
-// Interface to Cypress FX2 bus
-// A packet is 512 Bytes.  Each fifo line is 4 bytes
-// Fifo has 1024 or 2048 lines
-
-module bus_interface
-  (     input usbclk,
-	input reset,
-	inout [15:0] usbdata,   // TRISTATE
-	input wire [5:0] usbctl,
-	output wire [5:0] usbrdy,
-	output [31:0] txdata,
-	input [31:0] rxdata,
-	input txclk,
-	input txstrobe,
-	input rxclk,
-	input rxstrobe,
-	output [11:0] debugbus,
-	input clear_status
-	);
-
-   parameter   IN_CHANNELS = 1;
-   parameter   OUT_CHANNELS = 1;
-   parameter   bitmask = (IN_CHANNELS*2)-1;
-
-   wire have_space, have_pkt_rdy;
-   wire WR, RD, OE;
-   reg tx_underrun, rx_overrun;
-   
-   assign WR = usbctl[0];
-   assign RD = usbctl[1];
-   assign OE = usbctl[2];
-   
-   assign usbrdy[0] = have_space;
-   assign usbrdy[1] = have_pkt_rdy;
-   assign usbrdy[2] = tx_underrun;
-   assign usbrdy[3] = rx_overrun;
-   
-   reg [IN_CHANNELS*2*16-1:0] fifo_in;
-   wire [OUT_CHANNELS*2*16-1:0] fifo_out;
-   
-   wire [15:0] usbdata_in = usbdata;
-   
-   reg select_out;
-   reg select_in;
-   
-   reg commit;
-   reg rd_next;
-   reg [15:0] usbdata_out;
-   wire [10:0] txfifolevel,rxfifolevel;
-   reg [8:0] write_count;
-   wire tx_empty;
-   wire tx_full;
-   wire rx_empty;
-   wire rx_full;
-   wire [31:0] txd;
-   wire rdreq;
-	
-   // Tri-state bus macro
-   bustri bustri(.data(usbdata_out),
-		 .enabledt(OE),
-		 .tridata(usbdata)  );
-
-   //////////////////////////////////////////////
-   // TX Side (USB --> DAC)
-   always @(posedge usbclk, posedge reset)
-     begin
-	if(reset)
-	  begin
-	     fifo_in <= #1 0;
-	     write_count <= #1 0;
-	  end
-	else 
-	  if(WR & ~write_count[8])
-	    begin
-	       case(write_count[0])
-		 1'b0 : fifo_in[31:16] <= #1 usbdata_in;  // I
-		 1'b1 : fifo_in[15:0] <= #1 usbdata_in;   // Q
-	       endcase
-	       write_count <= #1 write_count + 9'd1;
-	    end
-	  else
-	    write_count <= #1 WR ? write_count : 9'b0;
-     end
-   
-   always @(posedge usbclk)
-     if(reset)
-       commit <= #1 1'b0;
-     else
-       if(write_count[0] && ~write_count[8] && WR)
-	 commit <= #1 1'b1;
-       else 
-	 commit <= #1 1'b0;
-   
-   assign rdreq = txstrobe & !tx_empty;
-   assign txdata = tx_empty ? 32'b0 : txd;
-   
-   always @(posedge txclk)
-     if(reset)
-       tx_underrun <= 1'b0;
-     else if(txstrobe & tx_empty)
-       tx_underrun <= 1'b1;
-     else if(clear_status)
-       tx_underrun <= 1'b0;
-
-   fifo_1c_2k	txfifo (.data ( fifo_in ),
-			.wrreq ( commit ),
-			.wrclk ( usbclk ),
-
-			.q ( txd ),			
-			.rdreq ( rdreq),
-			.rdclk ( txclk ),
-			
-			.aclr ( reset ),
-
-			.rdempty ( tx_empty ),
-			.rdusedw (  ),
-			.wrfull ( tx_full ),
-			.wrusedw ( txfifolevel )
-			);
-   
-   assign have_space = (txfifolevel <= (2048-128));
-   
-   //////////////////////////////
-   // Receive FIFO (ADC --> USB)
-
-   always @(posedge rxclk)
-     if(reset)
-       rx_overrun <= 1'b0;
-     else if(rxstrobe & rx_full)
-       rx_overrun <= 1'b1;
-     else if(clear_status)
-       rx_overrun <= 1'b0;
-
-   always @(select_out, fifo_out)
-     case(select_out)
-       0 : usbdata_out = fifo_out[31:16];  // I
-       1 : usbdata_out = fifo_out[15:0];   // Q
-     endcase
-  
-/*
-	always @(posedge usbclk, posedge reset)
-	if(reset)
-		usbdata_out <= #1 16'b0;
-	else
-		if(select_out)
-			usbdata_out = fifo_out[31:16];
-		else
-			usbdata_out = fifo_out[15:0];
-	*/
-	 
-   always @(negedge usbclk, posedge reset)
-     if(reset)
-       select_out <= #1 1'b0;
-     else if(~RD)
-       select_out <= #1 1'b0;
-     else 
-       select_out <= #1 ~select_out;
- 
-   fifo_1c_2k	rxfifo (.data ( rxdata ), // counter ),
-			.wrreq (rxstrobe & ~rx_full ),
-			.wrclk ( rxclk ),
-			
-			.q ( fifo_out ),
-			.rdreq ( select_out ),// & RD ), // FIXME
-			.rdclk ( usbclk ),
-			
-			.aclr ( reset ),
-			
-			.rdempty ( rx_empty ),
-			.rdusedw ( rxfifolevel ),
-			.wrfull ( rx_full ),
-			.wrusedw (  )
-			);
-   
-   assign have_pkt_rdy = (rxfifolevel >= 128);
-
-   // Debugging Aids
-   assign debugbus[0] = tx_underrun;
-   assign debugbus[1] = rx_overrun;
-   assign debugbus[2] = tx_empty;
-   assign debugbus[3] = tx_full;
-   assign debugbus[4] = rx_empty;
-   assign debugbus[5] = rx_full;
-   assign debugbus[6] = txstrobe;
-   assign debugbus[7] = rxstrobe;
-   assign debugbus[8] = select_out;
-   assign debugbus[9] = rxstrobe & ~rx_full;
-   assign debugbus[10] = have_space;
-   assign debugbus[11] = have_pkt_rdy;
-   
-endmodule // bus_interface
-