diff options
| author | Johnathan Corgan <jcorgan@corganenterprises.com> | 2009-10-01 11:00:25 -0700 |
|---|---|---|
| committer | Johnathan Corgan <jcorgan@corganenterprises.com> | 2009-10-01 11:07:59 -0700 |
| commit | 1ff74777e47f3a2edefc5154484f2bdcb86c1a13 (patch) | |
| tree | 04f94ef4f7f06a210f7532592829332c7f2621f0 /models | |
| parent | 7b8f65256b5ea300187ebb6a359df2fa707a295d (diff) | |
| parent | 42fc55415af499980901c7787f44c7e74b4a9ce1 (diff) | |
| download | uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.gz uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.tar.bz2 uhd-1ff74777e47f3a2edefc5154484f2bdcb86c1a13.zip | |
Merge branch 'new_eth' of http://gnuradio.org/git/matt into master
* 'new_eth' of http://gnuradio.org/git/matt: (42 commits)
Fix warnings, mostly from implicitly defined wires or unspecified widths
fullchip sim now compiles again, after moving eth and models over to new simple_gemac
remove unused opencores
remove debugging code
no idea where this came from, it shouldn't be here
Copied wb_1master back from quad radio
Remove old mac. Good riddance.
remove unused port
More xilinx fifos, more clean up of our fifos
might as well use a cascade fifo to help timing and give a little more capacity
fix a typo which caused tx glitches
Untested fixes for getting serdes onto the new fifo system. Compiles, at least
Implement Eth flow control using pause frames
parameterized fifo sizes, some reformatting
remove unused old style fifo
allow control of whether or not to honor flow control, adds some debug lines
debug the rx side
no longer used, replaced by newfifo version
remove special last_line adjustment from ethernet port
Firmware now inserts mac source address value in each frame.
...
Diffstat (limited to 'models')
| -rw-r--r-- | models/adc_model.v | 5 | ||||
| -rw-r--r-- | models/miim_model.v | 14 | ||||
| -rw-r--r-- | models/phy_sim.v | 113 | ||||
| -rw-r--r-- | models/xlnx_glbl.v | 29 |
4 files changed, 158 insertions, 3 deletions
diff --git a/models/adc_model.v b/models/adc_model.v index 247472c35..e5a3ee0d8 100644 --- a/models/adc_model.v +++ b/models/adc_model.v @@ -22,10 +22,9 @@ module adc_model assign adc_ovf_b = adc_oe_b ? 1'b0 : 1'bz; real phase = 0; - real sample_rate = 100000000; - real freq = 330000/sample_rate; // 330 kHz + real freq = 330000/100000000; - real scale = math.pow(2,13)-2; + real scale = 8190; // math.pow(2,13)-2; always @(posedge clk) if(rst) begin diff --git a/models/miim_model.v b/models/miim_model.v new file mode 100644 index 000000000..936d99a80 --- /dev/null +++ b/models/miim_model.v @@ -0,0 +1,14 @@ + +// Skeleton PHY interface simulator + +module miim_model(input mdc_i, + inout mdio, + input phy_resetn_i, + input phy_clk_i, + output phy_intn_o, + output [2:0] speed_o); + + assign phy_intn_o = 1; // No interrupts + assign speed_o = 3'b100; // 1G mode + +endmodule // miim_model diff --git a/models/phy_sim.v b/models/phy_sim.v new file mode 100644 index 000000000..b3de19b04 --- /dev/null +++ b/models/phy_sim.v @@ -0,0 +1,113 @@ +//////////////////////////////////////////////////////////////////////
+//// ////
+//// Phy_sim.v ////
+//// ////
+//// This file is part of the Ethernet IP core project ////
+//// http://www.opencores.org/projects.cgi/web/ethernet_tri_mode/////
+//// ////
+//// Author(s): ////
+//// - Jon Gao (gaojon@yahoo.com) ////
+//// ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: Phy_sim.v,v $
+// Revision 1.3 2006/11/17 17:53:07 maverickist
+// no message
+//
+// Revision 1.2 2006/01/19 14:07:50 maverickist
+// verification is complete.
+//
+// Revision 1.1.1.1 2005/12/13 01:51:44 Administrator
+// no message
+//
+
+`timescale 1ns/100ps
+
+module phy_sim(
+ input Gtx_clk, // Used only in GMII mode
+ output Rx_clk,
+ output Tx_clk, // Used only in MII mode
+ input Tx_er,
+ input Tx_en,
+ input [7:0] Txd,
+ output Rx_er,
+ output Rx_dv,
+ output [7:0] Rxd,
+ output Crs,
+ output Col,
+ input [2:0] Speed,
+ input Done
+);
+
+//////////////////////////////////////////////////////////////////////
+// this file used to simulate Phy.
+// generate clk and loop the Tx data to Rx data
+// full duplex mode can be verified on loop mode.
+//////////////////////////////////////////////////////////////////////
+//////////////////////////////////////////////////////////////////////
+// internal signals
+//////////////////////////////////////////////////////////////////////
+reg Clk_25m; // Used for 100 Mbps mode
+reg Clk_2_5m; // Used for 10 Mbps mode
+
+//wire Rx_clk;
+//wire Tx_clk; // Used only in MII mode
+
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #20 Clk_25m = 0;
+ #20 Clk_25m = 1;
+ end
+ end
+
+ initial
+ begin
+ #10;
+ while ( !Done )
+ begin
+ #200 Clk_2_5m = 0;
+ #200 Clk_2_5m = 1;
+ end
+ end
+
+ assign Rx_clk = Speed[2] ? Gtx_clk : Speed[1] ? Clk_25m : Speed[0] ? Clk_2_5m : 0;
+ assign Tx_clk = Speed[2] ? Gtx_clk : Speed[1] ? Clk_25m : Speed[0] ? Clk_2_5m : 0;
+
+ assign Rx_dv = Tx_en;
+ assign Rxd = Txd;
+ assign Rx_er = Tx_er;
+ assign Crs = Tx_en;
+ assign Col = 0;
+
+endmodule
diff --git a/models/xlnx_glbl.v b/models/xlnx_glbl.v new file mode 100644 index 000000000..662a60e35 --- /dev/null +++ b/models/xlnx_glbl.v @@ -0,0 +1,29 @@ +module xlnx_glbl
+(
+ GSR,
+ GTS
+);
+
+ //--------------------------------------------------------------------------
+ // Parameters
+ //--------------------------------------------------------------------------
+
+ //--------------------------------------------------------------------------
+ // IO declarations
+ //--------------------------------------------------------------------------
+
+ output GSR;
+ output GTS;
+
+ //--------------------------------------------------------------------------
+ // Local declarations
+ //--------------------------------------------------------------------------
+
+ //--------------------------------------------------------------------------
+ // Internal declarations
+ //--------------------------------------------------------------------------
+
+ assign GSR = 0;
+ assign GTS = 0;
+
+endmodule
|