Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 49 insertions, 0 deletions

diff --git a/models/adc_model.v b/models/adc_model.v
new file mode 100644
index 000000000..247472c35
--- /dev/null
+++ b/models/adc_model.v
@@ -0,0 +1,49 @@
+
+module adc_model
+  (input clk, input rst,
+   output [13:0] adc_a,
+   output adc_ovf_a,
+   input adc_on_a,
+   input adc_oe_a,
+   output [13:0] adc_b,
+   output adc_ovf_b,
+   input adc_on_b,
+   input adc_oe_b
+   );
+   
+   math_real math ( ) ;
+
+   reg [13:0] adc_a_int = 0;
+   reg [13:0] adc_b_int = 0;
+   
+   assign     adc_a = adc_oe_a ? adc_a_int : 14'bz;
+   assign     adc_ovf_a = adc_oe_a ? 1'b0 : 1'bz;
+   assign     adc_b = adc_oe_b ? adc_b_int : 14'bz;
+   assign     adc_ovf_b = adc_oe_b ? 1'b0 : 1'bz;
+   
+   real       phase = 0;
+   real       sample_rate = 100000000;
+   real       freq = 330000/sample_rate;     // 330 kHz
+
+   real       scale = math.pow(2,13)-2;
+   always @(posedge clk)
+     if(rst)
+       begin
+	  adc_a_int <= 0;
+	  adc_b_int <= 0;
+       end
+     else 
+       begin
+	  if(adc_on_a)
+	    //adc_a_int <= $rtoi(math.round(math.sin(phase*math.MATH_2_PI)*scale)) ;
+	    adc_a_int <= adc_a_int + 3;
+	  if(adc_on_b)
+	    adc_b_int <= adc_b_int - 7;
+	  //adc_b_int <= $rtoi(math.round(math.cos(phase*math.MATH_2_PI)*scale)) ;
+	  if(phase > 1)
+	    phase <= phase + freq - 1;
+	  else
+	    phase <= phase + freq;
+       end
+   
+endmodule // adc_model