Merged r9433:9527 from features/gr-usrp2 into trunk. Adds usrp2 and gr-usrp2 top-level components. Trunk passes distcheck with mb-gcc installed, but currently not without them. The key issue is that when mb-gcc is not installed, the build system skips over the usrp2/firmware directory, and the firmware include files don't get put into the dist tarball. But we can't do the usual DIST_SUBDIRS method as the firmware is a subpackage.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@9528 221aa14e-8319-0410-a670-987f0aec2ac5

1 files changed, 61 insertions, 0 deletions

diff --git a/models/SRLC16E.v b/models/SRLC16E.v
new file mode 100644
index 000000000..a68bbe9e9
--- /dev/null
+++ b/models/SRLC16E.v
@@ -0,0 +1,61 @@
+// $Header: /devl/xcs/repo/env/Databases/CAEInterfaces/verunilibs/data/unisims/SRLC16E.v,v 1.6.158.1 2007/03/09 18:13:20 patrickp Exp $
+///////////////////////////////////////////////////////////////////////////////
+// Copyright (c) 1995/2004 Xilinx, Inc.
+// All Right Reserved.
+///////////////////////////////////////////////////////////////////////////////
+//   ____  ____
+//  /   /\/   /
+// /___/  \  /    Vendor : Xilinx
+// \   \   \/     Version : 8.1i (I.13)
+//  \   \         Description : Xilinx Functional Simulation Library Component
+//  /   /                  16-Bit Shift Register Look-Up-Table with Carry and Clock Enable
+// /___/   /\     Filename : SRLC16E.v
+// \   \  /  \    Timestamp : Thu Mar 25 16:43:40 PST 2004
+//  \___\/\___\
+//
+// Revision:
+//    03/23/04 - Initial version.
+// End Revision
+
+`timescale  1 ps / 1 ps
+
+
+module SRLC16E (Q, Q15, A0, A1, A2, A3, CE, CLK, D);
+
+    parameter INIT = 16'h0000;
+
+    output Q, Q15;
+
+    input  A0, A1, A2, A3, CE, CLK, D;
+
+    reg  [15:0] data;
+    wire [3:0]  addr;
+    wire	q_int;
+
+    buf b_a3 (addr[3], A3);
+    buf b_a2 (addr[2], A2);
+    buf b_a1 (addr[1], A1);
+    buf b_a0 (addr[0], A0);
+
+    buf b_q_int (q_int, data[addr]);
+    buf b_q (Q, q_int);
+    buf b_q15_int (q15_int, data[15]);
+    buf b_q15 (Q15, q15_int);
+
+    initial
+    begin
+          assign  data = INIT;
+          while (CLK === 1'b1 || CLK===1'bX) 
+            #10; 
+          deassign data;
+    end
+
+    always @(posedge CLK) begin
+	if (CE == 1'b1) begin
+	    {data[15:0]} <= #100 {data[14:0], D};
+	end
+    end
+
+
+endmodule
+