DBSRX support in UHD

8 files changed, 719 insertions, 4 deletions

diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst
index b85164d04..8e6ecc4ae 100644
--- a/host/docs/dboards.rst
+++ b/host/docs/dboards.rst
@@ -35,6 +35,19 @@ Though the magic of aliasing, you can up-convert signals
 greater than the nyquist rate of the DAC.
 
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+DBSRX
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+The DBSRX board has 1 quadrature subdevice.
+
+Receive Antennas: **J3**
+
+The board has no user selectable antenna setting
+
+Recieve Gains: 
+    **GC1**, Range: 0-56dB
+    **GC2**, Range: 0-24dB
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
 RFX Series
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Transmit Antennas: **TX/RX**
diff --git a/host/include/uhd/utils/algorithm.hpp b/host/include/uhd/utils/algorithm.hpp
index 54bc78494..1b5eacfa9 100644
--- a/host/include/uhd/utils/algorithm.hpp
+++ b/host/include/uhd/utils/algorithm.hpp
@@ -69,6 +69,31 @@ namespace std{
     }
 
     /*!
+     * A wrapper around std::reverse that takes a range instead of an iterator.
+     *
+     * The elements are reversed into descending order using the less-than operator.
+     *
+     * \param range the range of elements to be reversed
+     */
+    template<typename Range> inline void reverse(Range &range){
+        return std::reverse(boost::begin(range), boost::end(range));
+    }
+
+    /*!
+     * A wrapper around std::reverse that takes a range instead of an iterator.
+     *
+     * The elements are reversed into descending order using the less-than operator.
+     * This wrapper reverses the elements non-destructively into a new range.
+     * Based on the builtin python function reversed(...)
+     *
+     * \param range the range of elements to be reversed
+     * \return a new range with the elements reversed
+     */
+    template<typename Range> inline Range reversed(const Range &range){
+        Range srange(range); std::reverse(srange); return srange;
+    }
+
+    /*!
      * Is the value found within the elements in this range?
      *
      * Uses std::find to search the iterable for an element.
diff --git a/host/lib/ic_reg_maps/CMakeLists.txt b/host/lib/ic_reg_maps/CMakeLists.txt
index ba1bbc9f0..f8e15c13d 100644
--- a/host/lib/ic_reg_maps/CMakeLists.txt
+++ b/host/lib/ic_reg_maps/CMakeLists.txt
@@ -55,6 +55,11 @@ LIBUHD_PYTHON_GEN_SOURCE(
 )
 
 LIBUHD_PYTHON_GEN_SOURCE(
+    ${CMAKE_SOURCE_DIR}/lib/ic_reg_maps/gen_max2118_regs.py
+    ${CMAKE_BINARY_DIR}/lib/ic_reg_maps/max2118_regs.hpp
+)
+
+LIBUHD_PYTHON_GEN_SOURCE(
     ${CMAKE_SOURCE_DIR}/lib/ic_reg_maps/gen_ad9862_regs.py
     ${CMAKE_BINARY_DIR}/lib/ic_reg_maps/ad9862_regs.hpp
 )
diff --git a/host/lib/ic_reg_maps/common.py b/host/lib/ic_reg_maps/common.py
index 47325a7e3..986093004 100644
--- a/host/lib/ic_reg_maps/common.py
+++ b/host/lib/ic_reg_maps/common.py
@@ -173,7 +173,7 @@ class mreg:
     def get_type(self):
         return 'boost::uint%d_t'%max(2**math.ceil(math.log(self.get_bit_width(), 2)), 8)
 
-def generate(name, regs_tmpl, body_tmpl='', file=__file__):
+def generate(name, regs_tmpl, body_tmpl='', file=__file__, append=False):
     #evaluate the regs template and parse each line into a register
     regs = list(); mregs = list()
     for entry in parse_tmpl(regs_tmpl).splitlines():
@@ -193,4 +193,4 @@ def generate(name, regs_tmpl, body_tmpl='', file=__file__):
     )
 
     #write the generated code to file specified by argv1
-    open(sys.argv[1], 'w').write(code)
+    open(sys.argv[1], 'a' if append else 'w').write(code)
diff --git a/host/lib/ic_reg_maps/gen_max2118_regs.py b/host/lib/ic_reg_maps/gen_max2118_regs.py
new file mode 100644
index 000000000..a52685b07
--- /dev/null
+++ b/host/lib/ic_reg_maps/gen_max2118_regs.py
@@ -0,0 +1,126 @@
+#!/usr/bin/env python
+#
+# Copyright 2010 Ettus Research LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+########################################################################
+# Template for raw text data describing write registers
+# name addr[bit range inclusive] default optional enums
+########################################################################
+WRITE_REGS_TMPL="""\
+########################################################################
+## Note: offsets given from perspective of data bits (excludes address)
+########################################################################
+##
+########################################################################
+## N-Divider MSB (0) Write
+########################################################################
+div2                  0[7]          0       div4, div2
+n_divider_msb         0[0:6]        3
+########################################################################
+## N-Divider LSB (1) Write
+########################################################################
+n_divider_lsb         1[0:7]        0xB6
+~n_divider            n_divider_lsb, n_divider_msb
+########################################################################
+## R, Charge Pump, and VCO (2) Write
+########################################################################
+#set $r_divider_names = ', '.join(map(lambda x: 'div' + str(2**(x+1)), range(0,8)))
+r_divider             2[5:7]        1       $r_divider_names 
+#set $cp_current_bias = ', '.join(map(lambda x: 'i_cp_%dua'%(50*2**x), range(0,4)))
+cp_current            2[3:4]        3       $cp_current_bias
+osc_band              2[0:2]        5
+########################################################################
+## I/Q Filter DAC (3) Write
+########################################################################
+##unused              3[7]          0
+f_dac                 3[0:6]        0x7F    ## filter tuning dac, depends on m
+########################################################################
+## LPF Divider DAC (4) Write
+########################################################################
+adl_vco_adc_latch     4[7]          0       disabled, enabled
+ade_vco_ade_read      4[6]          0       disabled, enabled
+dl_output_drive       4[5]          0       iq_590m_vpp, iq_1_vpp
+m_divider             4[0:4]        2       ## filter tuning counter
+########################################################################
+## GC2 and Diag (5) Write
+########################################################################
+diag                  5[5:7]        0       normal, cp_i_source, cp_i_sink, cp_high_z, unused, n_and_filt, r_and_gc2, m_div
+gc2                   5[0:4]        0x1F    ## Step Size: 0-1: 0dB, 2-22: 1dB, 23-31: 0.5dB
+"""
+
+########################################################################
+# Template for raw text data describing read registers
+# name addr[bit range inclusive] default optional enums
+########################################################################
+READ_REGS_TMPL="""\
+########################################################################
+## Status (0) Read
+########################################################################
+pwr                   0[6]          0       not_reset, reset
+adc                   0[2:5]        0       ## VCO tuning voltage, Lock Status
+########################################################################
+## I/Q Filter DAC (1) Read
+########################################################################
+filter_dac            1[0:6]        0       ## I/Q Filter tuning DAC, current
+"""
+
+########################################################################
+# Template for methods in the body of the struct
+########################################################################
+BODY_TMPL="""\
+boost::uint8_t get_reg(boost::uint8_t addr){
+    boost::uint8_t reg = 0;
+    switch(addr){
+    #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs)))
+    case $addr:
+        #for $reg in filter(lambda r: r.get_addr() == addr, $regs)
+        reg |= (boost::uint8_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift();
+        #end for
+        break;
+    #end for
+    }
+    return boost::uint8_t(reg);
+}
+
+void set_reg(boost::uint8_t addr, boost::uint8_t reg){
+    switch(addr){
+    #for $addr in sorted(set(map(lambda r: r.get_addr(), $regs)))
+    case $addr:
+        #for $reg in filter(lambda r: r.get_addr() == addr, $regs)
+        $reg.get_name() = $(reg.get_type())((reg >> $reg.get_shift()) & $reg.get_mask());
+        #end for
+        break;
+    #end for
+    }
+}
+"""
+
+if __name__ == '__main__':
+    import common; common.generate(
+        name='max2118_write_regs',
+        regs_tmpl=WRITE_REGS_TMPL,
+        body_tmpl=BODY_TMPL,
+        file=__file__,
+    )
+
+    import common; common.generate(
+        name='max2118_read_regs',
+        regs_tmpl=READ_REGS_TMPL,
+        body_tmpl=BODY_TMPL,
+        file=__file__,
+        append=True,
+    )
diff --git a/host/lib/usrp/dboard/CMakeLists.txt b/host/lib/usrp/dboard/CMakeLists.txt
index 6093583d3..3e995009e 100644
--- a/host/lib/usrp/dboard/CMakeLists.txt
+++ b/host/lib/usrp/dboard/CMakeLists.txt
@@ -22,6 +22,7 @@ LIBUHD_APPEND_SOURCES(
     ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_rfx.cpp
     ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_xcvr2450.cpp
     ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_wbx.cpp
+    ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_dbsrx.cpp
     ${CMAKE_SOURCE_DIR}/lib/usrp/dboard/db_unknown.cpp
 )
 
diff --git a/host/lib/usrp/dboard/db_dbsrx.cpp b/host/lib/usrp/dboard/db_dbsrx.cpp
new file mode 100644
index 000000000..94bd7347c
--- /dev/null
+++ b/host/lib/usrp/dboard/db_dbsrx.cpp
@@ -0,0 +1,545 @@
+//
+// Copyright 2010 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+// No RX IO Pins Used
+
+// RX IO Functions
+
+#include "max2118_regs.hpp"
+#include <uhd/utils/static.hpp>
+#include <uhd/utils/assert.hpp>
+#include <uhd/utils/algorithm.hpp>
+#include <uhd/types/ranges.hpp>
+#include <uhd/types/dict.hpp>
+#include <uhd/usrp/subdev_props.hpp>
+#include <uhd/usrp/dboard_base.hpp>
+#include <uhd/usrp/dboard_manager.hpp>
+#include <boost/assign/list_of.hpp>
+#include <boost/format.hpp>
+#include <boost/thread.hpp>
+#include <boost/math/special_functions/round.hpp>
+#include <utility>
+
+using namespace uhd;
+using namespace uhd::usrp;
+using namespace boost::assign;
+
+/***********************************************************************
+ * The DBSRX constants
+ **********************************************************************/
+static const bool dbsrx_debug = true;
+
+static const freq_range_t dbsrx_freq_range(0.8e9, 2.4e9);
+
+static const freq_range_t dbsrx_pfd_freq_range(0.15e6, 2.01e6);
+
+static const prop_names_t dbsrx_antennas = list_of("J3");
+
+static const uhd::dict<std::string, gain_range_t> dbsrx_gain_ranges = map_list_of
+    ("GC1", gain_range_t(0, 56, 0.5))
+    ("GC2", gain_range_t(0, 24, 1))
+;
+
+/***********************************************************************
+ * The DBSRX dboard class
+ **********************************************************************/
+class dbsrx : public rx_dboard_base{
+public:
+    dbsrx(ctor_args_t args, boost::uint8_t max2118_addr);
+    ~dbsrx(void);
+
+    void rx_get(const wax::obj &key, wax::obj &val);
+    void rx_set(const wax::obj &key, const wax::obj &val);
+
+private:
+    double _lo_freq;
+    float _bandwidth;
+    uhd::dict<std::string, float> _gains;
+    max2118_write_regs_t _max2118_write_regs;
+    max2118_read_regs_t _max2118_read_regs;
+    boost::uint8_t _max2118_addr; //0x67 or 0x65 depending on which side
+
+    void set_lo_freq(double target_freq);
+    void set_gain(float gain, const std::string &name);
+    void set_bandwidth(float bandwidth);
+
+    void send_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){
+        start_reg = boost::uint8_t(std::clip(int(start_reg), 0x0, 0x5));
+        stop_reg = boost::uint8_t(std::clip(int(stop_reg), 0x0, 0x5));
+
+        for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t) - 1){
+            int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) - 1 ? sizeof(boost::uint32_t) - 1 : stop_reg - start_addr + 1;
+
+            //create buffer for register data (+1 for start address)
+            byte_vector_t regs_vector(num_bytes + 1);
+
+            //first byte is the address of first register
+            regs_vector[0] = start_addr;
+
+            //get the register data
+            for(int i=0; i<num_bytes; i++){
+                regs_vector[1+i] = _max2118_write_regs.get_reg(start_addr+i);
+                if(dbsrx_debug) std::cerr << boost::format(
+                    "DBSRX: send reg 0x%02x, value 0x%04x, start_addr = 0x%04x, num_bytes %d"
+                ) % int(start_addr+i) % int(regs_vector[1+i]) % int(start_addr) % num_bytes << std::endl;
+            }
+
+            //send the data
+            this->get_iface()->write_i2c(
+                _max2118_addr, regs_vector
+            );
+        }
+    }
+
+    void read_reg(boost::uint8_t start_reg, boost::uint8_t stop_reg){
+        static const boost::uint8_t status_addr = 0x0;
+        start_reg = boost::uint8_t(std::clip(int(start_reg), 0x0, 0x1));
+        stop_reg = boost::uint8_t(std::clip(int(stop_reg), 0x0, 0x1));
+
+        for(boost::uint8_t start_addr=start_reg; start_addr <= stop_reg; start_addr += sizeof(boost::uint32_t)){
+            int num_bytes = int(stop_reg - start_addr + 1) > int(sizeof(boost::uint32_t)) ? sizeof(boost::uint32_t) : stop_reg - start_addr + 1;
+
+            //create address to start reading register data
+            byte_vector_t address_vector(1);
+            address_vector[0] = start_addr;
+
+            /*
+            //send the address
+            this->get_iface()->write_i2c(
+                _max2118_addr, address_vector
+            );
+            */
+
+            //create buffer for register data
+            byte_vector_t regs_vector(num_bytes);
+
+            //read from i2c
+            regs_vector = this->get_iface()->read_i2c(
+                _max2118_addr, num_bytes
+            );
+
+            for(boost::uint8_t i=0; i < num_bytes; i++){
+                if (i + start_addr >= status_addr){
+                    _max2118_read_regs.set_reg(i + start_addr, regs_vector[i]);
+                    if(dbsrx_debug) std::cerr << boost::format(
+                        "DBSRX: set reg 0x%02x, value 0x%04x"
+                    ) % int(i + start_addr) % int(_max2118_read_regs.get_reg(i + start_addr)) << std::endl;
+                }
+                if(dbsrx_debug) std::cerr << boost::format(
+                    "DBSRX: read reg 0x%02x, value 0x%04x, start_addr = 0x%04x, num_bytes %d"
+                ) % int(start_addr+i) % int(regs_vector[i]) % int(start_addr) % num_bytes << std::endl;
+            }
+        }
+    }
+
+    /*!
+     * Is the LO locked?
+     * \return true for locked
+     */
+    bool get_locked(void){
+        read_reg(0x0, 0x1);
+
+        //mask and return lock detect
+        bool locked = 5 >= _max2118_read_regs.adc && _max2118_read_regs.adc >= 2;
+
+        if(dbsrx_debug) std::cerr << boost::format(
+            "DBSRX: locked %d"
+        ) % locked << std::endl;
+
+        return locked;
+    }
+
+};
+
+/***********************************************************************
+ * Register the DBSRX dboard
+ **********************************************************************/
+// FIXME 0x67 is the default i2c address on USRP2
+//       need to handle which side for USRP1 with different address
+static dboard_base::sptr make_dbsrx(dboard_base::ctor_args_t args){
+    return dboard_base::sptr(new dbsrx(args, 0x67));
+}
+
+//FIXME different dbid for USRP1 also
+UHD_STATIC_BLOCK(reg_dbsrx_dboard){
+    //register the factory function for the rx dbid
+    dboard_manager::register_dboard(0x000D, &make_dbsrx, "DBSRX");
+}
+
+/***********************************************************************
+ * Structors
+ **********************************************************************/
+dbsrx::dbsrx(ctor_args_t args, boost::uint8_t max2118_addr) : rx_dboard_base(args){
+    //enable only the clocks we need
+    this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true);
+
+    //set the gpio directions and atr controls (identically)
+    this->get_iface()->set_pin_ctrl(dboard_iface::UNIT_RX, 0x0); // All unused in atr
+    this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, 0x0); // All Inputs
+
+    //set the i2c address for the max2118
+    _max2118_addr = max2118_addr;
+
+    //send initial register settings
+    this->send_reg(0x0, 0x5);
+
+    //set defaults for LO, gains
+    set_lo_freq(dbsrx_freq_range.min);
+    BOOST_FOREACH(const std::string &name, dbsrx_gain_ranges.keys()){
+        set_gain(dbsrx_gain_ranges[name].min, name);
+    }
+
+    set_bandwidth(22.27e6); // default bandwidth from datasheet
+
+    get_locked();
+}
+
+dbsrx::~dbsrx(void){
+}
+
+
+/***********************************************************************
+ * Tuning
+ **********************************************************************/
+void dbsrx::set_lo_freq(double target_freq){
+    target_freq = std::clip(target_freq, dbsrx_freq_range.min, dbsrx_freq_range.max);
+
+    double actual_freq=0.0, pfd_freq=0.0, ref_clock=0.0;
+    int R=0, N=0, r=0;
+
+    //choose refclock
+    std::vector<double> clock_rates = this->get_iface()->get_clock_rates(dboard_iface::UNIT_RX);
+    BOOST_FOREACH(ref_clock, std::reversed(std::sorted(clock_rates))){
+        if (ref_clock != 4e6) continue;
+
+        //choose R
+        for(r = 0; r <= 6; r += 1) {
+            //compute divider from setting
+            R = pow(2, r+1);
+            if (dbsrx_debug) std::cerr << boost::format("DBSRX R:%d\n") % R << std::endl;
+
+            //compute PFD compare frequency = ref_clock/R
+            pfd_freq = ref_clock / R;
+
+            //constrain the PFD frequency to specified range
+            if ((pfd_freq < dbsrx_pfd_freq_range.min) or (pfd_freq > dbsrx_pfd_freq_range.max)) continue;
+
+            //compute N
+            N = int(std::floor(target_freq/pfd_freq));
+
+            //constrain N to specified range
+            if ((N < 256) or (N > 32768)) continue;
+
+            goto done_loop;
+        }
+    } 
+
+    //Assert because we failed to find a suitable combination of ref_clock, R and N 
+    UHD_ASSERT_THROW((pfd_freq < dbsrx_pfd_freq_range.min) or (pfd_freq > dbsrx_pfd_freq_range.max));
+    UHD_ASSERT_THROW((N < 256) or (N > 32768));
+    done_loop:
+
+    //compute resulting output frequency
+    actual_freq = pfd_freq * N;
+
+    //apply ref_clock, R, and N settings
+    this->get_iface()->set_clock_rate(dboard_iface::UNIT_RX, ref_clock);
+    ref_clock = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX);
+    _max2118_write_regs.r_divider = (max2118_write_regs_t::r_divider_t) r;
+    _max2118_write_regs.set_n_divider(N);
+    _max2118_write_regs.ade_vco_ade_read = max2118_write_regs_t::ADE_VCO_ADE_READ_ENABLED;
+    send_reg(0x4,0x4);
+    send_reg(0x0,0x2);
+    
+    //compute prescaler variables
+    int scaler = actual_freq > 1125e6 ? 2 : 4;
+    _max2118_write_regs.div2 = scaler == 4 ? max2118_write_regs_t::DIV2_DIV4 : max2118_write_regs_t::DIV2_DIV2;
+
+    //compute vco frequency and select vco
+    double vco_freq = actual_freq * scaler;
+    int vco;
+    if (vco_freq < 2433e6)
+        vco = 0;
+    else if (vco_freq < 2711e6)
+        vco=1;
+    else if (vco_freq < 3025e6)
+        vco=2;
+    else if (vco_freq < 3341e6)
+        vco=3;
+    else if (vco_freq < 3727e6)
+        vco=4;
+    else if (vco_freq < 4143e6)
+        vco=5;
+    else if (vco_freq < 4493e6)
+        vco=6;
+    else
+        vco=7;
+
+    //apply vco selection
+    _max2118_write_regs.osc_band = vco;
+    send_reg(0x2, 0x2);
+
+    //check vtune for lock condition
+    read_reg(0x0, 0x1);
+
+    //if we are out of lock for chosen vco, change vco
+    while ((_max2118_read_regs.adc == 0) or (_max2118_read_regs.adc == 7)){
+        //vtune is too low, try lower frequency vco
+        if (_max2118_read_regs.adc == 0){
+            UHD_ASSERT_THROW(_max2118_write_regs.osc_band <= 0);
+            _max2118_write_regs.osc_band -= 1;
+        }
+
+        //vtune is too high, try higher frequency vco
+        if (_max2118_read_regs.adc == 7){
+            UHD_ASSERT_THROW(_max2118_write_regs.osc_band >= 7);
+            _max2118_write_regs.osc_band += 1;
+        }
+
+        //update vco selection and check vtune
+        send_reg(0x2, 0x2);
+        read_reg(0x0, 0x0);
+    }
+      
+    //select charge pump bias current
+    if (_max2118_read_regs.adc <= 2) _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_100UA;
+    else if (_max2118_read_regs.adc >= 5) _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_400UA;
+    else _max2118_write_regs.cp_current = max2118_write_regs_t::CP_CURRENT_I_CP_200UA;
+    
+    //update charge pump bias current setting
+    send_reg(0x2, 0x2);
+
+    //compute actual tuned frequency
+    _lo_freq = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX) / pow(2,(1 + _max2118_write_regs.r_divider)) * _max2118_write_regs.get_n_divider();
+
+    //debug output of calculated variables
+    if (dbsrx_debug) std::cerr
+        << boost::format("DBSRX tune:\n")
+        << boost::format("    VCO=%d, CP=%d, PFD Freq=%fMHz\n") % int(_max2118_write_regs.osc_band) % _max2118_write_regs.cp_current % (pfd_freq/1e6)
+        << boost::format("    R=%d, N=%f, scaler=%d, div2=%d\n") % R % N % scaler % int(_max2118_write_regs.div2)
+        << boost::format("    Ref    Freq=%fMHz\n") % (ref_clock/1e6)
+        << boost::format("    Target Freq=%fMHz\n") % (target_freq/1e6)
+        << boost::format("    Actual Freq=%fMHz\n") % (_lo_freq/1e6)
+        << std::endl;
+}
+
+/***********************************************************************
+ * Gain Handling
+ **********************************************************************/
+/*!
+ * Convert a requested gain for the GC2 vga into the integer register value.
+ * The gain passed into the function will be set to the actual value.
+ * \param gain the requested gain in dB
+ * \return 5 bit the register value
+ */
+static int gain_to_gc2_vga_reg(float &gain){
+    int reg = 0;
+    gain = std::clip<float>(boost::math::iround(gain), dbsrx_gain_ranges["GC2"].min, dbsrx_gain_ranges["GC2"].max);
+
+    // Half dB steps from 0-5dB, 1dB steps from 5-24dB
+    if (gain < 5) {
+        reg = boost::math::iround(31.0 - gain/0.5);
+        gain = float(boost::math::iround(gain)) * 0.5;
+    } else {
+        reg = boost::math::iround(22.0 - (gain - 4.0));
+        gain = float(boost::math::iround(gain));
+    }
+
+    if (dbsrx_debug) std::cerr << boost::format(
+        "DBSRX GC2 Gain: %f dB, reg: %d"
+    ) % gain % reg << std::endl;
+
+    return reg;
+}
+
+/*!
+ * Convert a requested gain for the GC1 rf vga into the dac_volts value.
+ * The gain passed into the function will be set to the actual value.
+ * \param gain the requested gain in dB
+ * \return dac voltage value
+ */
+static float gain_to_gc1_rfvga_dac(float &gain){
+    //clip the input
+    gain = std::clip<float>(gain, dbsrx_gain_ranges["GC1"].min, dbsrx_gain_ranges["GC1"].max);
+
+    //voltage level constants
+    static const float max_volts = float(2.7), min_volts = float(1.2);
+    static const float slope = (max_volts-min_volts)/dbsrx_gain_ranges["GC1"].max;
+
+    //calculate the voltage for the aux dac
+    float dac_volts = gain*slope + min_volts;
+
+    if (dbsrx_debug) std::cerr << boost::format(
+        "DBSRX GC1 Gain: %f dB, dac_volts: %f V"
+    ) % gain % dac_volts << std::endl;
+
+    //the actual gain setting
+    gain = (dac_volts - min_volts)/slope;
+
+    return dac_volts;
+}
+
+void dbsrx::set_gain(float gain, const std::string &name){
+    assert_has(dbsrx_gain_ranges.keys(), name, "dbsrx gain name");
+    if (name == "GC2"){
+        _max2118_write_regs.gc2 = gain_to_gc2_vga_reg(gain);
+        send_reg(0x5, 0x5);
+    }
+    else if(name == "GC1"){
+        //write the new voltage to the aux dac
+        this->get_iface()->write_aux_dac(dboard_iface::UNIT_RX, dboard_iface::AUX_DAC_A, gain_to_gc1_rfvga_dac(gain));
+    }
+    else UHD_THROW_INVALID_CODE_PATH();
+    _gains[name] = gain;
+}
+
+/***********************************************************************
+ * Bandwidth Handling
+ **********************************************************************/
+void dbsrx::set_bandwidth(float bandwidth){
+    //clip the input
+    bandwidth = std::clip<float>(bandwidth, 4e6, 33e6);
+    
+    //calculate ref_freq
+    float ref_freq = this->get_iface()->get_clock_rate(dboard_iface::UNIT_RX);
+
+    //FIXME this contraint needs to be in the set_freq and needs to assert if it can't hit the range
+    //calculate acceptable m_divider for filter tuning
+    int m = 1;
+    while (ref_freq/m < 1e6 or ref_freq/m > 2.5e6){ m++; }
+    _max2118_write_regs.m_divider = m;
+
+    _bandwidth = float((ref_freq/1e6/_max2118_write_regs.m_divider)*(4+0.145*_max2118_write_regs.f_dac)*1e6);
+
+    _max2118_write_regs.f_dac = int(((bandwidth*_max2118_write_regs.m_divider/ref_freq) - 4)/0.145);
+
+    if (dbsrx_debug) std::cerr << boost::format(
+        "DBSRX Filter Bandwidth: %f MHz, m: %d, f_dac: %d\n"
+    ) % (_bandwidth/1e6) % m % int(_max2118_write_regs.f_dac) << std::endl;
+
+    this->send_reg(0x3, 0x5);
+}
+
+/***********************************************************************
+ * RX Get and Set
+ **********************************************************************/
+void dbsrx::rx_get(const wax::obj &key_, wax::obj &val){
+    wax::obj key; std::string name;
+    boost::tie(key, name) = extract_named_prop(key_);
+
+    //handle the get request conditioned on the key
+    switch(key.as<subdev_prop_t>()){
+    case SUBDEV_PROP_NAME:
+        val = get_rx_id().to_pp_string();
+        return;
+
+    case SUBDEV_PROP_OTHERS:
+        val = prop_names_t(); //empty
+        return;
+
+    case SUBDEV_PROP_GAIN:
+        assert_has(_gains.keys(), name, "dbsrx gain name");
+        val = _gains[name];
+        return;
+
+    case SUBDEV_PROP_GAIN_RANGE:
+        assert_has(dbsrx_gain_ranges.keys(), name, "dbsrx gain name");
+        val = dbsrx_gain_ranges[name];
+        return;
+
+    case SUBDEV_PROP_GAIN_NAMES:
+        val = prop_names_t(dbsrx_gain_ranges.keys());
+        return;
+
+    case SUBDEV_PROP_FREQ:
+        val = _lo_freq;
+        return;
+
+    case SUBDEV_PROP_FREQ_RANGE:
+        val = dbsrx_freq_range;
+        return;
+
+    case SUBDEV_PROP_ANTENNA:
+        val = std::string("J3");
+        return;
+
+    case SUBDEV_PROP_ANTENNA_NAMES:
+        val = dbsrx_antennas;
+        return;
+
+/*
+    case SUBDEV_PROP_QUADRATURE:
+        val = true;
+        return;
+
+    case SUBDEV_PROP_IQ_SWAPPED:
+        val = false;
+        return;
+
+    case SUBDEV_PROP_SPECTRUM_INVERTED:
+        val = false;
+        return;
+*/
+    case SUBDEV_PROP_CONNECTION:
+        val = SUBDEV_CONN_COMPLEX_IQ;
+        return;
+
+    case SUBDEV_PROP_USE_LO_OFFSET:
+        val = false;
+        return;
+
+    case SUBDEV_PROP_LO_LOCKED:
+        val = this->get_locked();
+        return;
+
+/*
+    case SUBDEV_PROP_RSSI:
+        val = this->get_rssi();
+        return;
+*/
+
+    case SUBDEV_PROP_BANDWIDTH:
+        val = _bandwidth;
+        return;
+
+    default: UHD_THROW_PROP_GET_ERROR();
+    }
+}
+
+void dbsrx::rx_set(const wax::obj &key_, const wax::obj &val){
+    wax::obj key; std::string name;
+    boost::tie(key, name) = extract_named_prop(key_);
+
+    //handle the get request conditioned on the key
+    switch(key.as<subdev_prop_t>()){
+
+    case SUBDEV_PROP_FREQ:
+        this->set_lo_freq(val.as<double>());
+        return;
+
+    case SUBDEV_PROP_GAIN:
+        this->set_gain(val.as<float>(), name);
+        return;
+
+    case SUBDEV_PROP_BANDWIDTH:
+        this->set_bandwidth(val.as<float>());
+        return;
+
+    default: UHD_THROW_PROP_SET_ERROR();
+    }
+}
+
diff --git a/host/lib/usrp/usrp2/clock_ctrl.cpp b/host/lib/usrp/usrp2/clock_ctrl.cpp
index b9be037c0..02227afad 100644
--- a/host/lib/usrp/usrp2/clock_ctrl.cpp
+++ b/host/lib/usrp/usrp2/clock_ctrl.cpp
@@ -86,7 +86,7 @@ public:
 
     void set_rate_rx_dboard_clock(double rate){
         assert_has(get_rates_rx_dboard_clock(), rate, "rx dboard clock rate");
-        size_t divider = size_t(rate/get_master_clock_rate());
+        size_t divider = size_t(get_master_clock_rate()/rate);
         //bypass when the divider ratio is one
         _ad9510_regs.bypass_divider_out7 = (divider == 1)? 1 : 0;
         //calculate the low and high dividers
@@ -118,7 +118,7 @@ public:
 
     void set_rate_tx_dboard_clock(double rate){
         assert_has(get_rates_tx_dboard_clock(), rate, "tx dboard clock rate");
-        size_t divider = size_t(rate/get_master_clock_rate());
+        size_t divider = size_t(get_master_clock_rate()/rate);
         //bypass when the divider ratio is one
         _ad9510_regs.bypass_divider_out6 = (divider == 1)? 1 : 0;
         //calculate the low and high dividers