diff options
| author | Moritz Fischer <moritz.fischer@ettus.com> | 2015-07-29 22:58:54 -0700 |
|---|---|---|
| committer | Martin Braun <martin.braun@ettus.com> | 2015-08-03 13:15:19 -0700 |
| commit | 62011cff7326aca24d064d1a5f54ba0a5a16e93b (patch) | |
| tree | 88501faa90e06e7e6cd30262f31fd6c355efd6b2 /host | |
| parent | 4ed2b26d512ed8c8e78fbbfcf25a3560fd8c7102 (diff) | |
| download | uhd-62011cff7326aca24d064d1a5f54ba0a5a16e93b.tar.gz uhd-62011cff7326aca24d064d1a5f54ba0a5a16e93b.tar.bz2 uhd-62011cff7326aca24d064d1a5f54ba0a5a16e93b.zip | |
e3xx: docs: Add a paragraph on network configuration.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Diffstat (limited to 'host')
| -rw-r--r-- | host/docs/usrp_e3x0.dox | 52 |
1 files changed, 48 insertions, 4 deletions
diff --git a/host/docs/usrp_e3x0.dox b/host/docs/usrp_e3x0.dox index b175cc201..f34aef229 100644 --- a/host/docs/usrp_e3x0.dox +++ b/host/docs/usrp_e3x0.dox @@ -1,4 +1,4 @@ -/*! \page page_usrp_e3x0 USRP-E3x0 Series +/*! \page page_usrp_e3x0 USRP-E3xx Series \tableofcontents @@ -35,7 +35,7 @@ There are two different methods to connect to the device - using the gigabit ethernet connector and a ssh client on your host computer For the first boot, booting with the serial cable connected to the device -is recommended, as it allows to review and modify the network configuration, +is recommended, as it allows to review and modify the \ref e3xx_network_configuration and allows to enter the bootloader in case of issues during the boot. @@ -248,8 +248,7 @@ You may need to change the USRP's IP address for several reasons: - to use multiple USRP-E Series devices with the same host computer - to set a known IP address into USRP (in case you forgot) - - +For examples refer to the \ref e3xx_network_configuration section. \section e3x0_hw Hardware Notes @@ -626,6 +625,51 @@ TRX-B | >= 2940.0 | 11 | 10 | XXX _Note: Although the transmit filters are low pass, the following table describes UHD's tuning range for selecting each filter path. The table also includes the required transmit enable states._ +\section e3xx_network_configuration Network configuration + +Your USRP E3XX Series device can be configured by editing the /etc/network/interfaces.<br> +The device defaults to *DHCP*, meaning it will query the local network's DHCP server for an address. + +\subsection e3xx_network_dhcp DHCP + +The default configuration should look similar to, instructing your device to query +local DHCP servers for an IP address, gateway, etc. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +auto eth0 +iface eth0 inet dhcp +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In order to change the hostname used to obtain an IP address via DHCP change + + /etc/hostname + +and edit: + + /etc/network/interfaces + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +auto eth0 +iface eth0 inet dhcp + hostname your-hostname +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + +\subsection e3xx_network_static Static IP + +To configure a static IP address edit + + /etc/hostname + +to look like + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +auto eth0 +iface eth0 inet static + address your-ip + netmask your-netmask + gateway your-gateway +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + \section e3x0_misc Miscellaneous \subsection e3x0_misc_multirx Multiple RX channels |