set dboard eeprom from dboard properties

4 files changed, 48 insertions, 22 deletions

diff --git a/host/lib/usrp/usrp2/dboard_iface.cpp b/host/lib/usrp/usrp2/dboard_iface.cpp
index 9d9b745ae..9503c329b 100644
--- a/host/lib/usrp/usrp2/dboard_iface.cpp
+++ b/host/lib/usrp/usrp2/dboard_iface.cpp
@@ -42,8 +42,8 @@ public:
     void set_gpio_ddr(unit_t, boost::uint16_t);
     boost::uint16_t read_gpio(unit_t);
 
-    void write_i2c(int, const byte_vector_t &);
-    byte_vector_t read_i2c(int, size_t);
+    void write_i2c(boost::uint8_t, const byte_vector_t &);
+    byte_vector_t read_i2c(boost::uint8_t, size_t);
 
     double get_clock_rate(unit_t);
     void set_clock_enabled(unit_t, bool);
@@ -212,12 +212,12 @@ boost::uint32_t usrp2_dboard_iface::read_write_spi(
 /***********************************************************************
  * I2C
  **********************************************************************/
-void usrp2_dboard_iface::write_i2c(int i2c_addr, const byte_vector_t &buf){
-    return _iface->write_i2c(i2c_addr, buf);
+void usrp2_dboard_iface::write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){
+    return _iface->write_i2c(addr, bytes);
 }
 
-byte_vector_t usrp2_dboard_iface::read_i2c(int i2c_addr, size_t num_bytes){
-    return _iface->read_i2c(i2c_addr, num_bytes);
+byte_vector_t usrp2_dboard_iface::read_i2c(boost::uint8_t addr, size_t num_bytes){
+    return _iface->read_i2c(addr, num_bytes);
 }
 
 /***********************************************************************
diff --git a/host/lib/usrp/usrp2/dboard_impl.cpp b/host/lib/usrp/usrp2/dboard_impl.cpp
index d697f11f0..8952a9f75 100644
--- a/host/lib/usrp/usrp2/dboard_impl.cpp
+++ b/host/lib/usrp/usrp2/dboard_impl.cpp
@@ -18,7 +18,6 @@
 
 #include "usrp2_impl.hpp"
 #include "usrp2_regs.hpp"
-#include <uhd/usrp/dboard_eeprom.hpp>
 #include <uhd/usrp/subdev_props.hpp>
 #include <uhd/usrp/dboard_props.hpp>
 #include <uhd/utils/assert.hpp>
@@ -34,16 +33,16 @@ using namespace uhd::usrp;
  * Helper Methods
  **********************************************************************/
 void usrp2_impl::dboard_init(void){
-    //extract the dboard ids
-    dboard_eeprom_t db_rx_eeprom(_iface->read_eeprom(I2C_ADDR_RX_DB, 0, dboard_eeprom_t::num_bytes()));
-    dboard_eeprom_t db_tx_eeprom(_iface->read_eeprom(I2C_ADDR_TX_DB, 0, dboard_eeprom_t::num_bytes()));
+    //read the dboard eeprom to extract the dboard ids
+    _rx_db_eeprom = dboard_eeprom_t(_iface->read_eeprom(I2C_ADDR_RX_DB, 0, dboard_eeprom_t::num_bytes()));
+    _tx_db_eeprom = dboard_eeprom_t(_iface->read_eeprom(I2C_ADDR_TX_DB, 0, dboard_eeprom_t::num_bytes()));
 
     //create a new dboard interface and manager
     dboard_iface::sptr _dboard_iface(
         make_usrp2_dboard_iface(_iface, _clk_ctrl)
     );
     _dboard_manager = dboard_manager::make(
-        db_rx_eeprom.id, db_tx_eeprom.id, _dboard_iface
+        _rx_db_eeprom.id, _tx_db_eeprom.id, _dboard_iface
     );
 
     //load dboards
@@ -120,19 +119,29 @@ void usrp2_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){
         val = _rx_subdevs_in_use;
         return;
 
+    case DBOARD_PROP_DBOARD_ID:
+        val = _rx_db_eeprom.id;
+        return;
+
     //case DBOARD_PROP_CODEC:
     //    throw std::runtime_error("unhandled prop in usrp2 dboard");
     }
 }
 
 void usrp2_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){
-    if (key.as<dboard_prop_t>() == DBOARD_PROP_USED_SUBDEVS){
+    switch(key.as<dboard_prop_t>()){
+    case DBOARD_PROP_USED_SUBDEVS:
         _rx_subdevs_in_use = val.as<prop_names_t>();
         update_rx_mux_config(); //if the val is bad, this will throw
         return;
-    }
 
-    throw std::runtime_error("Cannot set on usrp2 dboard");
+    case DBOARD_PROP_DBOARD_ID:
+        _rx_db_eeprom.id = val.as<dboard_id_t>();
+        _iface->write_eeprom(I2C_ADDR_RX_DB, 0, _tx_db_eeprom.get_eeprom_bytes());
+        return;
+
+    default: throw std::runtime_error("Cannot set read-only property on usrp2 dboard");
+    }
 }
 
 /***********************************************************************
@@ -160,17 +169,27 @@ void usrp2_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){
         val = _tx_subdevs_in_use;
         return;
 
+    case DBOARD_PROP_DBOARD_ID:
+        val = _tx_db_eeprom.id;
+        return;
+
     //case DBOARD_PROP_CODEC:
     //    throw std::runtime_error("unhandled prop in usrp2 dboard");
     }
 }
 
 void usrp2_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){
-    if (key.as<dboard_prop_t>() == DBOARD_PROP_USED_SUBDEVS){
+    switch(key.as<dboard_prop_t>()){
+    case DBOARD_PROP_USED_SUBDEVS:
         _tx_subdevs_in_use = val.as<prop_names_t>();
         update_tx_mux_config(); //if the val is bad, this will throw
         return;
-    }
 
-    throw std::runtime_error("Cannot set on usrp2 dboard");
+    case DBOARD_PROP_DBOARD_ID:
+        _tx_db_eeprom.id = val.as<dboard_id_t>();
+        _iface->write_eeprom(I2C_ADDR_TX_DB, 0, _tx_db_eeprom.get_eeprom_bytes());
+        return;
+
+    default: throw std::runtime_error("Cannot set read-only property on usrp2 dboard");
+    }
 }
diff --git a/host/lib/usrp/usrp2/usrp2_iface.cpp b/host/lib/usrp/usrp2/usrp2_iface.cpp
index c639c0dfe..76ee5d6fe 100644
--- a/host/lib/usrp/usrp2/usrp2_iface.cpp
+++ b/host/lib/usrp/usrp2/usrp2_iface.cpp
@@ -136,8 +136,8 @@ public:
 /***********************************************************************
  * EEPROM
  **********************************************************************/
-    void write_eeprom(boost::uint8_t addr, boost::uint8_t offset, const byte_vector_t &buf){
-        BOOST_FOREACH(boost::uint8_t byte, buf){
+    void write_eeprom(boost::uint8_t addr, boost::uint8_t offset, const byte_vector_t &bytes){
+        BOOST_FOREACH(boost::uint8_t byte, bytes){
             //write a byte at a time, its easy that way
             byte_vector_t cmd = boost::assign::list_of(offset)(byte);
             this->write_i2c(addr, cmd);
@@ -145,9 +145,13 @@ public:
     }
 
     byte_vector_t read_eeprom(boost::uint8_t addr, boost::uint8_t offset, size_t num_bytes){
-        //do a zero byte write to start read cycle
-        write_i2c(addr, byte_vector_t(1, offset));
-        return read_i2c(addr, num_bytes);
+        byte_vector_t bytes;
+        for (size_t i = 0; i < num_bytes; i++){
+            //do a zero byte write to start read cycle
+            write_i2c(addr, byte_vector_t(1, offset));
+            bytes.push_back(read_i2c(addr, 1).at(0));
+        }
+        return bytes;
     }
 
 /***********************************************************************
diff --git a/host/lib/usrp/usrp2/usrp2_impl.hpp b/host/lib/usrp/usrp2/usrp2_impl.hpp
index dbcee367b..1c9387744 100644
--- a/host/lib/usrp/usrp2/usrp2_impl.hpp
+++ b/host/lib/usrp/usrp2/usrp2_impl.hpp
@@ -25,6 +25,7 @@
 #include <uhd/types/otw_type.hpp>
 #include <uhd/types/stream_cmd.hpp>
 #include <uhd/types/clock_config.hpp>
+#include <uhd/usrp/dboard_eeprom.hpp>
 #include <boost/shared_ptr.hpp>
 #include <boost/function.hpp>
 #include <uhd/transport/vrt.hpp>
@@ -161,12 +162,14 @@ private:
     void rx_dboard_set(const wax::obj &, const wax::obj &);
     wax_obj_proxy::sptr _rx_dboard_proxy;
     uhd::prop_names_t _rx_subdevs_in_use;
+    uhd::usrp::dboard_eeprom_t _rx_db_eeprom;
 
     //properties interface for tx dboard
     void tx_dboard_get(const wax::obj &, wax::obj &);
     void tx_dboard_set(const wax::obj &, const wax::obj &);
     wax_obj_proxy::sptr _tx_dboard_proxy;
     uhd::prop_names_t _tx_subdevs_in_use;
+    uhd::usrp::dboard_eeprom_t _tx_db_eeprom;
     void update_rx_mux_config(void);
     void update_tx_mux_config(void);