Merge branch 'get_codec_rate' of ettus.sourcerepo.com:ettus/uhdpriv into tvrx_uhd

3 files changed, 38 insertions, 19 deletions

diff --git a/host/lib/usrp/usrp1/dboard_iface.cpp b/host/lib/usrp/usrp1/dboard_iface.cpp
index 4791b55ce..4f0549a37 100644
--- a/host/lib/usrp/usrp1/dboard_iface.cpp
+++ b/host/lib/usrp/usrp1/dboard_iface.cpp
@@ -93,6 +93,7 @@ public:
     std::vector<double> get_clock_rates(unit_t);
     double get_clock_rate(unit_t);
     void set_clock_enabled(unit_t, bool);
+    double get_codec_rate(unit_t);
 
 private:
     usrp1_iface::sptr _iface;
@@ -170,6 +171,10 @@ void usrp1_dboard_iface::set_clock_enabled(unit_t, bool)
     //TODO we can only enable for special case anyway...
 }
 
+double usrp1_dboard_iface::get_codec_rate(unit_t){
+    return _clock->get_master_clock_freq();
+}
+
 /***********************************************************************
  * GPIO
  **********************************************************************/
diff --git a/host/lib/usrp/usrp1/usrp1_ctrl.cpp b/host/lib/usrp/usrp1/usrp1_ctrl.cpp
index 76e8ce368..5043aed7d 100644
--- a/host/lib/usrp/usrp1/usrp1_ctrl.cpp
+++ b/host/lib/usrp/usrp1/usrp1_ctrl.cpp
@@ -180,7 +180,7 @@ public:
         unsigned char reset_n = 0;
 
         //hit the reset line
-        if (load_img_msg) std::cout << "Loading firmware image " << filestring << "..." << std::flush;
+        if (load_img_msg) std::cout << "Loading firmware image: " << filestring << "..." << std::flush;
         usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0,
                            &reset_y, 1);
  
@@ -209,9 +209,9 @@ public:
             }  
             //type 0x01 is end 
             else if (type == 0x01) {
+                usrp_set_firmware_hash(hash); //set hash before reset
                 usrp_control_write(FX2_FIRMWARE_LOAD, 0xe600, 0,
                                    &reset_n, 1);
-                usrp_set_firmware_hash(hash);
                 file.close();
 
                 //wait for things to settle
@@ -267,11 +267,12 @@ public:
             return -1;
         }
 
-        ssize_t n;
-        while ((n = file.readsome((char *)buf, sizeof(buf))) > 0) {
+        while (not file.eof()) {
+            file.read((char *)buf, sizeof(buf));
+            size_t n = file.gcount();
             ret = usrp_control_write(VRQ_FPGA_LOAD, 0, FL_XFER,
                                      buf, n);
-            if (ret != n) {
+            if (ret < 0 or size_t(ret) != n) {
                 std::cerr << "fpga load error " << ret << std::endl;
                 file.close();
                 return -1;
diff --git a/host/lib/usrp/usrp1/usrp1_impl.cpp b/host/lib/usrp/usrp1/usrp1_impl.cpp
index 80ea49e9d..793e3027d 100644
--- a/host/lib/usrp/usrp1/usrp1_impl.cpp
+++ b/host/lib/usrp/usrp1/usrp1_impl.cpp
@@ -30,6 +30,7 @@
 #include <boost/assign/list_of.hpp>
 #include <boost/filesystem.hpp>
 #include <boost/thread/thread.hpp>
+#include <boost/lexical_cast.hpp>
 #include <iostream>
 
 using namespace uhd;
@@ -74,14 +75,14 @@ static device_addrs_t usrp1_find(const device_addr_t &hint)
     boost::uint16_t vid = hint.has_key("uninit") ? FX2_VENDOR_ID : USRP1_VENDOR_ID;
     boost::uint16_t pid = hint.has_key("uninit") ? FX2_PRODUCT_ID : USRP1_PRODUCT_ID;
 
-    //see what we got on the USB bus
-    std::vector<usb_device_handle::sptr> device_list =
-        usb_device_handle::get_device_list(vid, pid);
-
-    if(device_list.size() == 0) return usrp1_addrs; //return nothing if no USRPs found
+    // Important note:
+    // The get device list calls are nested inside the for loop.
+    // This allows the usb guts to decontruct when not in use,
+    // so that re-enumeration after fw load can occur successfully.
+    // This requirement is a courtesy of libusb1.0 on windows.
 
     //find the usrps and load firmware
-    BOOST_FOREACH(usb_device_handle::sptr handle, device_list) {
+    BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) {
             usb_control::sptr ctrl_transport = usb_control::make(handle);
             usrp_ctrl::sptr usrp_ctrl = usrp_ctrl::make(ctrl_transport);
             usrp_ctrl->usrp_load_firmware(usrp1_fw_image);
@@ -90,9 +91,8 @@ static device_addrs_t usrp1_find(const device_addr_t &hint)
     //get descriptors again with serial number, but using the initialized VID/PID now since we have firmware
     vid = USRP1_VENDOR_ID;
     pid = USRP1_PRODUCT_ID;
-    device_list = usb_device_handle::get_device_list(vid, pid);
 
-    BOOST_FOREACH(usb_device_handle::sptr handle, device_list) {
+    BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) {
             device_addr_t new_addr;
             new_addr["type"] = "usrp1";
             new_addr["serial"] = handle->get_serial();
@@ -108,6 +108,15 @@ static device_addrs_t usrp1_find(const device_addr_t &hint)
 /***********************************************************************
  * Make
  **********************************************************************/
+template<typename output_type> static output_type cast_from_dev_addr(
+	const device_addr_t &device_addr,
+	const std::string &key,
+	output_type def_val
+){
+	return (device_addr.has_key(key))?
+		boost::lexical_cast<output_type>(device_addr[key]) : def_val;
+}
+
 static device::sptr usrp1_make(const device_addr_t &device_addr)
 {
     //extract the FPGA path for the USRP1
@@ -131,11 +140,15 @@ static device::sptr usrp1_make(const device_addr_t &device_addr)
             usrp_ctrl = usrp_ctrl::make(ctrl_transport);
             usrp_ctrl->usrp_load_fpga(usrp1_fpga_image);
 
-            data_transport = usb_zero_copy::make(handle,        // identifier
-                                                 6,             // IN endpoint
-                                                 2,             // OUT endpoint
-                                                 2 * (1 << 20), // buffer size
-                                                 16384);        // transfer size
+            data_transport = usb_zero_copy::make(
+                handle,        // identifier
+                6,             // IN endpoint
+                2,             // OUT endpoint
+                size_t(cast_from_dev_addr<double>(device_addr, "recv_xfer_size", 0)),
+                size_t(cast_from_dev_addr<double>(device_addr, "recv_num_xfers", 0)),
+                size_t(cast_from_dev_addr<double>(device_addr, "send_xfer_size", 0)),
+                size_t(cast_from_dev_addr<double>(device_addr, "send_num_xfers", 0))
+            );
             break;
         }
     }
@@ -174,7 +187,7 @@ usrp1_impl::usrp1_impl(uhd::transport::usb_zero_copy::sptr data_transport,
     //initialize the mboard
     mboard_init();
 
-    //initialize the dboards 
+    //initialize the dboards
     dboard_init();
 
     //initialize the dsps