renamed dboard interface to dboard iface, the lengthy name was getting to be a burden

1 files changed, 14 insertions, 14 deletions

diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp
index 1cb39f83c..e5dc16808 100644
--- a/host/lib/usrp/dboard/db_rfx.cpp
+++ b/host/lib/usrp/dboard/db_rfx.cpp
@@ -112,19 +112,19 @@ rfx_xcvr::rfx_xcvr(
     _freq_range = freq_range;
 
     //enable the clocks that we need
-    this->get_interface()->set_clock_enabled(dboard_interface::UNIT_TX, true);
-    this->get_interface()->set_clock_enabled(dboard_interface::UNIT_RX, true);
+    this->get_iface()->set_clock_enabled(dboard_iface::UNIT_TX, true);
+    this->get_iface()->set_clock_enabled(dboard_iface::UNIT_RX, true);
 
     //set the gpio directions
     boost::uint16_t output_enables = POWER_UP | ANT_SW | MIX_EN;
-    this->get_interface()->set_gpio_ddr(dboard_interface::UNIT_TX, output_enables);
-    this->get_interface()->set_gpio_ddr(dboard_interface::UNIT_RX, output_enables);
+    this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_TX, output_enables);
+    this->get_iface()->set_gpio_ddr(dboard_iface::UNIT_RX, output_enables);
 
     //setup the tx atr (this does not change with antenna)
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_IDLE,        POWER_UP | ANT_SW);
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_RX_ONLY,     POWER_UP | ANT_SW);
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_TX_ONLY,     POWER_UP | MIX_EN);
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_TX, dboard_interface::ATR_REG_FULL_DUPLEX, POWER_UP | MIX_EN);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_IDLE,        POWER_UP | ANT_SW);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_RX_ONLY,     POWER_UP | ANT_SW);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_TX_ONLY,     POWER_UP | MIX_EN);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_TX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP | MIX_EN);
 
     //set some default values
     set_lo_freq((_freq_range.min + _freq_range.max)/2.0);
@@ -148,10 +148,10 @@ void rfx_xcvr::set_rx_ant(const std::string &ant){
     boost::uint16_t ant_val = (ant == "tx/rx")? 0 : ANT_SW;
 
     //set the rx atr regs
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_IDLE,        POWER_UP | ant_val);
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_RX_ONLY,     POWER_UP | ant_val | MIX_EN);
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_TX_ONLY,     POWER_UP | ant_val);
-    this->get_interface()->set_atr_reg(dboard_interface::UNIT_RX, dboard_interface::ATR_REG_FULL_DUPLEX, POWER_UP | ant_val | MIX_EN);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_IDLE,        POWER_UP | ant_val);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY,     POWER_UP | ant_val | MIX_EN);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY,     POWER_UP | ant_val);
+    this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, POWER_UP | ant_val | MIX_EN);
 }
 
 void rfx_xcvr::set_rx_pga0_gain(float gain){
@@ -165,8 +165,8 @@ void rfx_xcvr::reload_adf4360_regs(void){
         (adf4360_regs_t::ADDR_RCOUNTER)
     ;
     BOOST_FOREACH(adf4360_regs_t::addr_t addr, addrs){
-        this->get_interface()->write_spi(
-            dboard_interface::UNIT_TX,
+        this->get_iface()->write_spi(
+            dboard_iface::UNIT_TX,
             spi_config_t::EDGE_RISE,
             _adf4360_regs.get_reg(addr), 24
         );