diff options
| author | Josh Blum <josh@joshknows.com> | 2010-08-04 16:33:49 -0700 |
|---|---|---|
| committer | Josh Blum <josh@joshknows.com> | 2010-08-04 16:33:49 -0700 |
| commit | 8e1d51d628afb18dc9a36f268dda1e9f48a1c2ad (patch) | |
| tree | 9aea9b125848fa7fc3ea45c96bff27dde2c1e8fb /host/docs | |
| parent | 702d5af8ca0bab8ef295c817017df5952f6aea51 (diff) | |
| parent | 70abdef8f6c6d24a99caf8d3668f32094b159903 (diff) | |
| download | uhd-8e1d51d628afb18dc9a36f268dda1e9f48a1c2ad.tar.gz uhd-8e1d51d628afb18dc9a36f268dda1e9f48a1c2ad.tar.bz2 uhd-8e1d51d628afb18dc9a36f268dda1e9f48a1c2ad.zip | |
Merge branch 'master' into codec_gains
Conflicts:
host/lib/CMakeLists.txt
host/lib/utils/gain_handler.cpp
Diffstat (limited to 'host/docs')
| -rw-r--r-- | host/docs/dboards.rst | 2 | ||||
| -rw-r--r-- | host/docs/usrp2.rst | 4 |
2 files changed, 3 insertions, 3 deletions
diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst index 9c496ebee..b85164d04 100644 --- a/host/docs/dboards.rst +++ b/host/docs/dboards.rst @@ -45,7 +45,7 @@ The user may set the receive antenna to be TX/RX or RX2. However, when using an RFX board in full-duplex mode, the receive antenna will always be set to RX2, regardless of the settings. -Recieve Gains: **PGA0**, Range: 0-45dB +Recieve Gains: **PGA0**, Range: 0-70dB (except RFX400 range is 0-45dB) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ XCVR 2450 diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index 76b27fd31..bc4ea0e44 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -38,7 +38,7 @@ Run the following commands: ./configure --host=mb make -*The image file will be ./apps/txrx_uhd.bin* +*The image file will be ./usrp2/usrp2_txrx_uhd.bin* ------------------------------------------------------------------------ Load the images onto the SD card @@ -161,7 +161,7 @@ The USRP2 will reply to icmp echo requests. **Monitor the USRP2:** You can read the serial port on the rear of the USRP2 to get debug verbose from the embedded microcontroller. -Use a standard USB to tty-level serial converter at 230400 baud. +Use a standard USB to 3.3v-level serial converter at 230400 baud. The microcontroller prints useful information about IP addresses, MAC addresses, control packets, and fast-path settings. |