diff options
| author | Josh Blum <josh@joshknows.com> | 2010-05-27 23:09:09 +0000 |
|---|---|---|
| committer | Josh Blum <josh@joshknows.com> | 2010-05-27 23:09:09 +0000 |
| commit | e940d0225944a210584c386d270d09b132b5514b (patch) | |
| tree | 59188c0b162c29c02ed09a59b32ab84010ecf269 /host/docs/usrp2.rst | |
| parent | f113ae17863729f05b6ada815b9817cd16001211 (diff) | |
| parent | 4eff47a4b66eff61feffe6498b9ecebef94dc6b9 (diff) | |
| download | uhd-e940d0225944a210584c386d270d09b132b5514b.tar.gz uhd-e940d0225944a210584c386d270d09b132b5514b.tar.bz2 uhd-e940d0225944a210584c386d270d09b132b5514b.zip | |
Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv into usrp_e
Conflicts:
host/utils/CMakeLists.txt
Diffstat (limited to 'host/docs/usrp2.rst')
| -rw-r--r-- | host/docs/usrp2.rst | 27 |
1 files changed, 19 insertions, 8 deletions
diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index dfde06b27..1bd95cefa 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -45,22 +45,33 @@ Run the following commands: Load the images onto the SD card ------------------------------------------------------------------------ **Warning!** -Use the u2_flash_tool with caution. If you specify the wrong device node, +Use the usrp2_card_burner.py with caution. If you specify the wrong device node, you could overwrite your hard drive. Make sure that --dev= specifies the SD card. -Load the FPGA image: +Use the *--list* option to get a list of possible raw devices. +The list result will filter out disk partitions and devices too large to be the sd card. +The list option has been implemented on Linux, Mac OS X, and Windows. +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Use the card burner tool (unix) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: - cd <uhd-repo-path>/firmware/microblaze - sudo ./u2_flash_tool --dev=/dev/sd<XXX> -t fpga -w <path_to_fpga_image> + sudo <prefix>/share/uhd/utils/usrp2_card_burner_gui.py + + -- OR -- -Load the firmware image: + cd <prefix>/share/uhd/utils + sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fpga=<path_to_fpga_image> + sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fw=<path_to_firmware_image> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Use the card burner tool (windows) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: - cd <uhd-repo-path>/firmware/microblaze directory - sudo ./u2_flash_tool --dev=/dev/sd<XXX> -t s/w -w <path_to_firmware_image> + <path_to_python.exe> <prefix>/share/uhd/utils/usrp2_card_burner_gui.py + ------------------------------------------------------------------------ Setup networking @@ -103,7 +114,7 @@ Run the following commands: :: cd <prefix>/share/uhd/utils - ./usrp_burner --addr=192.168.10.2 --new-ip=192.168.10.3 + ./usrp_addr_burner --addr=192.168.10.2 --new-ip=192.168.10.3 **Method 2 (Linux Only):** This method assumes that you do not know the IP address of your USRP2. |