diff options
| author | Josh Blum <josh@joshknows.com> | 2010-11-09 18:38:39 -0800 |
|---|---|---|
| committer | Josh Blum <josh@joshknows.com> | 2010-11-09 18:38:39 -0800 |
| commit | 3bca8c492514564a065e34d3284cb468873fcc8c (patch) | |
| tree | 73f11afc14eb62ac1c1ff5374dce9c3cb33c0278 /host/docs/usrp2.rst | |
| parent | 073518083f2c7044d4b0c16948a192c5623d0752 (diff) | |
| parent | c0dfc2cf47b98734c4218427c7c6f5eb92025a9c (diff) | |
| download | uhd-3bca8c492514564a065e34d3284cb468873fcc8c.tar.gz uhd-3bca8c492514564a065e34d3284cb468873fcc8c.tar.bz2 uhd-3bca8c492514564a065e34d3284cb468873fcc8c.zip | |
Merge branch 'master' into usrp_e_next
Diffstat (limited to 'host/docs/usrp2.rst')
| -rw-r--r-- | host/docs/usrp2.rst | 21 |
1 files changed, 15 insertions, 6 deletions
diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index 0ddcaa4e5..d07175ce4 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -11,9 +11,14 @@ Load the images onto the SD card Use the usrp2_card_burner.py with caution. If you specify the wrong device node, you could overwrite your hard drive. Make sure that --dev= specifies the SD card. -Use the *--list* option to get a list of possible raw devices. -The list result will filter out disk partitions and devices too large to be the sd card. -The list option has been implemented on Linux, Mac OS X, and Windows. +**Warning!** +It is possible to use 3rd party SD cards with the USRP2. +However, certain types of SD cards will not interface with the CPLD: + +* Cards can be SDHC, which is not a supported interface. +* Cards can have unexpected timing characteristics. + +For these reasons, we recommend that you use the SD card that was supplied with the USRP2. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use the card burner tool (unix) @@ -28,6 +33,10 @@ Use the card burner tool (unix) sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fpga=<path_to_fpga_image> sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fw=<path_to_firmware_image> +Use the *--list* option to get a list of possible raw devices. +The list result will filter out disk partitions and devices too large to be the sd card. +The list option has been implemented on Linux, Mac OS X, and Windows. + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use the card burner tool (windows) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -97,7 +106,7 @@ Run the following commands: :: cd <prefix>/share/uhd/utils - ./usrp_addr_burner --addr=192.168.10.2 --new-ip=192.168.10.3 + ./usrp_burn_mb_eeprom --args=<optional device args> --key=ip-addr --val=192.168.10.3 **Method 2 (Linux Only):** This method assumes that you do not know the IP address of your USRP2. @@ -179,8 +188,8 @@ The LEDs reveal the following about the state of the device: * **LED B:** undocumented * **LED C:** receiving * **LED D:** firmware loaded -* **LED E:** undocumented -* **LED F:** FPGA loaded +* **LED E:** reference lock +* **LED F:** CPLD loaded ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |