diff options
| author | Derek Kozel <derek.kozel@ettus.com> | 2016-10-20 19:50:00 -0700 |
|---|---|---|
| committer | mbr0wn <martin.braun@ettus.com> | 2016-10-21 10:05:23 -0700 |
| commit | 2a0e0612dcc9a477e690addae3fd8b42ed301f26 (patch) | |
| tree | 43eb9c9e86bc6d6ba4071b3eac3027bd9adafb94 /host/docs/usrp2.dox | |
| parent | 9b215d85b7ae09b253839f93284a637ebc3385c3 (diff) | |
| download | uhd-2a0e0612dcc9a477e690addae3fd8b42ed301f26.tar.gz uhd-2a0e0612dcc9a477e690addae3fd8b42ed301f26.tar.bz2 uhd-2a0e0612dcc9a477e690addae3fd8b42ed301f26.zip | |
Docs: Minor housekeeping
Diffstat (limited to 'host/docs/usrp2.dox')
| -rw-r--r-- | host/docs/usrp2.dox | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/host/docs/usrp2.dox b/host/docs/usrp2.dox index 3f85e45b5..7f8c94b8b 100644 --- a/host/docs/usrp2.dox +++ b/host/docs/usrp2.dox @@ -102,7 +102,7 @@ indirectly to a USRP2 through a Gigabit Ethernet switch. \subsection usrp2_network_setuphost Setup the host interface -The USRP2 communicates at the IP/UDP layer over the gigabit ethernet. +The USRP2 communicates at the IP/UDP layer over the gigabit Ethernet. The default IP address of the USRP2 is **192.168.10.2**. You will need to configure the host's Ethernet interface with a static IP address to enable communication. An address of **192.168.10.1** and a subnet mask @@ -189,7 +189,7 @@ IP address are in the previous section of this documentation. \subsection usrp2_commprob_firewall Firewall issues When the IP address is not specified, the device discovery broadcasts -UDP packets from each ethernet interface. Many firewalls will block the +UDP packets from each Ethernet interface. Many firewalls will block the replies to these broadcast packets. If disabling your system's firewall or specifying the IP address yields a discovered device, then your firewall may be blocking replies to UDP broadcast packets. If this is |