e320: Swap out liberio for internal Ethernet

1 files changed, 361 insertions, 92 deletions

diff --git a/fpga/usrp3/top/e320/ip/e320_ps_bd/e320_ps_bd.tcl b/fpga/usrp3/top/e320/ip/e320_ps_bd/e320_ps_bd.tcl
index 04ba4accd..779e7806a 100644
--- a/fpga/usrp3/top/e320/ip/e320_ps_bd/e320_ps_bd.tcl
+++ b/fpga/usrp3/top/e320/ip/e320_ps_bd/e320_ps_bd.tcl
@@ -1,6 +1,60 @@
+
+################################################################
+# This is a generated script based on design: e320_ps_bd
+#
+# Though there are limitations about the generated script,
+# the main purpose of this utility is to make learning
+# IP Integrator Tcl commands easier.
+################################################################
+
+namespace eval _tcl {
+proc get_script_folder {} {
+   set script_path [file normalize [info script]]
+   set script_folder [file dirname $script_path]
+   return $script_folder
+}
+}
+variable script_folder
+set script_folder [_tcl::get_script_folder]
+
+################################################################
+# Check if script is running in correct Vivado version.
+################################################################
+set scripts_vivado_version 2019.1
+set current_vivado_version [version -short]
+
+if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
+   puts ""
+   catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
+
+   return 1
+}
+
+################################################################
+# START
+################################################################
+
+# To test this script, run the following commands from Vivado Tcl console:
+# source e320_ps_bd_script.tcl
+
+# If there is no project opened, this script will create a
+# project, but make sure you do not have an existing project
+# <./myproj/project_1.xpr> in the current working folder.
+
+set list_projs [get_projects -quiet]
+if { $list_projs eq "" } {
+   create_project project_1 myproj -part xc7z045ffg900-3
+}
+
+
 # CHANGE DESIGN NAME HERE
+variable design_name
 set design_name e320_ps_bd
 
+# If you do not already have an existing IP Integrator design open,
+# you can create a design using the following command:
+#    create_bd_design $design_name
+
 # Creating design if needed
 set errMsg ""
 set nRet 0
@@ -8,25 +62,215 @@ set nRet 0
 set cur_design [current_bd_design -quiet]
 set list_cells [get_bd_cells -quiet]
 
-create_bd_design $design_name
-current_bd_design $design_name
+if { ${design_name} eq "" } {
+   # USE CASES:
+   #    1) Design_name not set
+
+   set errMsg "Please set the variable <design_name> to a non-empty value."
+   set nRet 1
+
+} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
+   # USE CASES:
+   #    2): Current design opened AND is empty AND names same.
+   #    3): Current design opened AND is empty AND names diff; design_name NOT in project.
+   #    4): Current design opened AND is empty AND names diff; design_name exists in project.
+
+   if { $cur_design ne $design_name } {
+      common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
+      set design_name [get_property NAME $cur_design]
+   }
+   common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."
+
+} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
+   # USE CASES:
+   #    5) Current design opened AND has components AND same names.
+
+   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
+   set nRet 1
+} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
+   # USE CASES: 
+   #    6) Current opened design, has components, but diff names, design_name exists in project.
+   #    7) No opened design, design_name exists in project.
+
+   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
+   set nRet 2
+
+} else {
+   # USE CASES:
+   #    8) No opened design, design_name not in project.
+   #    9) Current opened design, has components, but diff names, design_name not in project.
+
+   common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."
+
+   create_bd_design $design_name
+
+   common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
+   current_bd_design $design_name
+
+}
+
+common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."
 
 if { $nRet != 0 } {
-   puts $errMsg
+   catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
    return $nRet
 }
 
-set scriptDir [file dirname [info script]]
+set bCheckIPsPassed 1
+##################################################################
+# CHECK IPs
+##################################################################
+set bCheckIPs 1
+if { $bCheckIPs == 1 } {
+   set list_check_ips "\ 
+xilinx.com:ip:processing_system7:5.5\
+xilinx.com:ip:xlconcat:2.1\
+xilinx.com:ip:xlslice:1.0\
+xilinx.com:ip:axi_dma:7.1\
+xilinx.com:ip:axi_protocol_converter:2.1\
+"
+
+   set list_ips_missing ""
+   common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
+
+   foreach ip_vlnv $list_check_ips {
+      set ip_obj [get_ipdefs -all $ip_vlnv]
+      if { $ip_obj eq "" } {
+         lappend list_ips_missing $ip_vlnv
+      }
+   }
+
+   if { $list_ips_missing ne "" } {
+      catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n  $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
+      set bCheckIPsPassed 0
+   }
+
+}
+
+if { $bCheckIPsPassed != 1 } {
+  common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
+  return 3
+}
 
 ##################################################################
 # DESIGN PROCs
 ##################################################################
-source "$scriptDir/chdr_dma_top.tcl"
+
+
+# Hierarchical cell: dma
+proc create_hier_cell_dma { parentCell nameHier } {
+
+  variable script_folder
+
+  if { $parentCell eq "" || $nameHier eq "" } {
+     catch {common::send_msg_id "BD_TCL-102" "ERROR" "create_hier_cell_dma() - Empty argument(s)!"}
+     return
+  }
+
+  # Get object for parentCell
+  set parentObj [get_bd_cells $parentCell]
+  if { $parentObj == "" } {
+     catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
+     return
+  }
+
+  # Make sure parentObj is hier blk
+  set parentType [get_property TYPE $parentObj]
+  if { $parentType ne "hier" } {
+     catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
+     return
+  }
+
+  # Save current instance; Restore later
+  set oldCurInst [current_bd_instance .]
+
+  # Set parent object as current
+  current_bd_instance $parentObj
+
+  # Create cell and set as current instance
+  set hier_obj [create_bd_cell -type hier $nameHier]
+  current_bd_instance $hier_obj
+
+  # Create interface pins
+  create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M_AXI_DMA_SG
+
+  create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M_AXI_RX_DMA
+
+  create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M_AXI_TX_DMA
+
+  create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 m_axis_dma
+
+  create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi_dmac
+
+  create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 s_axis_dma
+
+
+  # Create pins
+  create_bd_pin -dir I bus_clk
+  create_bd_pin -dir I bus_rstn
+  create_bd_pin -dir I clk40
+  create_bd_pin -dir I clk40_rstn
+  create_bd_pin -dir O rx_irq
+  create_bd_pin -dir O tx_irq
+
+  # Create instance: axi_dma_eth_internal, and set properties
+  set axi_dma_eth_internal [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dma:7.1 axi_dma_eth_internal ]
+  set_property -dict [ list \
+   CONFIG.c_enable_multi_channel {0} \
+   CONFIG.c_include_mm2s_dre {1} \
+   CONFIG.c_include_s2mm_dre {1} \
+   CONFIG.c_m_axi_mm2s_data_width {64} \
+   CONFIG.c_m_axis_mm2s_tdata_width {64} \
+   CONFIG.c_mm2s_burst_size {16} \
+   CONFIG.c_num_mm2s_channels {1} \
+   CONFIG.c_num_s2mm_channels {1} \
+   CONFIG.c_s2mm_burst_size {16} \
+   CONFIG.c_sg_include_stscntrl_strm {0} \
+ ] $axi_dma_eth_internal
+
+  # Create instance: axi_protocol_convert_rx, and set properties
+  set axi_protocol_convert_rx [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_protocol_converter:2.1 axi_protocol_convert_rx ]
+  set_property -dict [ list \
+   CONFIG.TRANSLATION_MODE {0} \
+ ] $axi_protocol_convert_rx
+
+  # Create instance: axi_protocol_convert_tx, and set properties
+  set axi_protocol_convert_tx [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_protocol_converter:2.1 axi_protocol_convert_tx ]
+  set_property -dict [ list \
+   CONFIG.TRANSLATION_MODE {0} \
+ ] $axi_protocol_convert_tx
+
+  # Create interface connections
+  connect_bd_intf_net -intf_net axi_dma_eth_internal_M_AXIS_MM2S [get_bd_intf_pins m_axis_dma] [get_bd_intf_pins axi_dma_eth_internal/M_AXIS_MM2S]
+  connect_bd_intf_net -intf_net axi_dma_eth_internal_M_AXI_MM2S [get_bd_intf_pins axi_dma_eth_internal/M_AXI_MM2S] [get_bd_intf_pins axi_protocol_convert_tx/S_AXI]
+  connect_bd_intf_net -intf_net axi_dma_eth_internal_M_AXI_S2MM [get_bd_intf_pins axi_dma_eth_internal/M_AXI_S2MM] [get_bd_intf_pins axi_protocol_convert_rx/S_AXI]
+  connect_bd_intf_net -intf_net axi_dma_eth_internal_M_AXI_SG [get_bd_intf_pins M_AXI_DMA_SG] [get_bd_intf_pins axi_dma_eth_internal/M_AXI_SG]
+  connect_bd_intf_net -intf_net axi_protocol_convert_0_M_AXI [get_bd_intf_pins M_AXI_RX_DMA] [get_bd_intf_pins axi_protocol_convert_rx/M_AXI]
+  connect_bd_intf_net -intf_net axi_protocol_convert_rx1_M_AXI [get_bd_intf_pins M_AXI_TX_DMA] [get_bd_intf_pins axi_protocol_convert_tx/M_AXI]
+  connect_bd_intf_net -intf_net s_axi_dmac_1 [get_bd_intf_pins s_axi_dmac] [get_bd_intf_pins axi_dma_eth_internal/S_AXI_LITE]
+  connect_bd_intf_net -intf_net s_axis_dma_1 [get_bd_intf_pins s_axis_dma] [get_bd_intf_pins axi_dma_eth_internal/S_AXIS_S2MM]
+
+  # Create port connections
+  connect_bd_net -net axi_dma_eth_internal_mm2s_introut [get_bd_pins tx_irq] [get_bd_pins axi_dma_eth_internal/mm2s_introut]
+  connect_bd_net -net axi_dma_eth_internal_mm2s_prmry_reset_out_n [get_bd_pins axi_dma_eth_internal/mm2s_prmry_reset_out_n] [get_bd_pins axi_protocol_convert_tx/aresetn]
+  connect_bd_net -net axi_dma_eth_internal_s2mm_introut [get_bd_pins rx_irq] [get_bd_pins axi_dma_eth_internal/s2mm_introut]
+  connect_bd_net -net axi_dma_eth_internal_s2mm_prmry_reset_out_n [get_bd_pins axi_dma_eth_internal/s2mm_prmry_reset_out_n] [get_bd_pins axi_protocol_convert_rx/aresetn]
+  connect_bd_net -net bus_clk_1 [get_bd_pins bus_clk] [get_bd_pins axi_dma_eth_internal/m_axi_mm2s_aclk] [get_bd_pins axi_dma_eth_internal/m_axi_s2mm_aclk] [get_bd_pins axi_dma_eth_internal/m_axi_sg_aclk] [get_bd_pins axi_protocol_convert_rx/aclk] [get_bd_pins axi_protocol_convert_tx/aclk]
+  connect_bd_net -net clk40_1 [get_bd_pins clk40] [get_bd_pins axi_dma_eth_internal/s_axi_lite_aclk]
+  connect_bd_net -net clk40_rstn_1 [get_bd_pins clk40_rstn] [get_bd_pins axi_dma_eth_internal/axi_resetn]
+
+  # Restore current instance
+  current_bd_instance $oldCurInst
+}
+
 
 # Procedure to create entire design; Provide argument to make
 # procedure reusable. If parentCell is "", will use root.
 proc create_root_design { parentCell } {
 
+  variable script_folder
+  variable design_name
+
   if { $parentCell eq "" } {
      set parentCell [get_bd_cells /]
   }
@@ -34,14 +278,14 @@ proc create_root_design { parentCell } {
   # Get object for parentCell
   set parentObj [get_bd_cells $parentCell]
   if { $parentObj == "" } {
-     puts "ERROR: Unable to find parent cell <$parentCell>!"
+     catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
      return
   }
 
   # Make sure parentObj is hier blk
   set parentType [get_property TYPE $parentObj]
   if { $parentType ne "hier" } {
-     puts "ERROR: Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."
+     catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
      return
   }
 
@@ -54,14 +298,43 @@ proc create_root_design { parentCell } {
 
   # Create interface ports
   set DDR [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR ]
+
   set GPIO_0 [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:gpio_rtl:1.0 GPIO_0 ]
-  set m_axis_dma [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 m_axis_dma ]
-  set s_axis_dma [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 s_axis_dma ]
+
+  set S_AXI_HP0 [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S_AXI_HP0 ]
   set_property -dict [ list \
-   CONFIG.HAS_TLAST 1 \
-   CONFIG.TDATA_NUM_BYTES 8 \
-   CONFIG.TDEST_WIDTH 4 \
-  ] $s_axis_dma
+   CONFIG.ADDR_WIDTH {32} \
+   CONFIG.ARUSER_WIDTH {0} \
+   CONFIG.AWUSER_WIDTH {0} \
+   CONFIG.BUSER_WIDTH {0} \
+   CONFIG.DATA_WIDTH {64} \
+   CONFIG.FREQ_HZ {40000000} \
+   CONFIG.HAS_BRESP {1} \
+   CONFIG.HAS_BURST {1} \
+   CONFIG.HAS_CACHE {1} \
+   CONFIG.HAS_LOCK {1} \
+   CONFIG.HAS_PROT {1} \
+   CONFIG.HAS_QOS {1} \
+   CONFIG.HAS_REGION {0} \
+   CONFIG.HAS_RRESP {1} \
+   CONFIG.HAS_WSTRB {1} \
+   CONFIG.ID_WIDTH {0} \
+   CONFIG.MAX_BURST_LENGTH {16} \
+   CONFIG.NUM_READ_OUTSTANDING {8} \
+   CONFIG.NUM_READ_THREADS {1} \
+   CONFIG.NUM_WRITE_OUTSTANDING {8} \
+   CONFIG.NUM_WRITE_THREADS {1} \
+   CONFIG.PROTOCOL {AXI4} \
+   CONFIG.READ_WRITE_MODE {READ_WRITE} \
+   CONFIG.RUSER_BITS_PER_BYTE {0} \
+   CONFIG.RUSER_WIDTH {0} \
+   CONFIG.SUPPORTS_NARROW_BURST {1} \
+   CONFIG.WUSER_BITS_PER_BYTE {0} \
+   CONFIG.WUSER_WIDTH {0} \
+   ] $S_AXI_HP0
+
+  set USBIND_0 [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:usbctrl_rtl:1.0 USBIND_0 ]
+
   set m_axi_eth_dma [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 m_axi_eth_dma ]
   set_property -dict [ list \
    CONFIG.ADDR_WIDTH {32} \
@@ -77,6 +350,25 @@ proc create_root_design { parentCell } {
    CONFIG.NUM_WRITE_OUTSTANDING {2} \
    CONFIG.PROTOCOL {AXI4LITE} \
    ] $m_axi_eth_dma
+
+  set m_axi_eth_internal [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 m_axi_eth_internal ]
+  set_property -dict [ list \
+   CONFIG.ADDR_WIDTH {31} \
+   CONFIG.DATA_WIDTH {32} \
+   CONFIG.FREQ_HZ {40000000} \
+   CONFIG.HAS_BURST {0} \
+   CONFIG.HAS_CACHE {0} \
+   CONFIG.HAS_LOCK {0} \
+   CONFIG.HAS_PROT {0} \
+   CONFIG.HAS_QOS {0} \
+   CONFIG.HAS_REGION {0} \
+   CONFIG.HAS_RRESP {1} \
+   CONFIG.HAS_WSTRB {0} \
+   CONFIG.NUM_READ_OUTSTANDING {2} \
+   CONFIG.NUM_WRITE_OUTSTANDING {2} \
+   CONFIG.PROTOCOL {AXI4LITE} \
+   ] $m_axi_eth_internal
+
   set m_axi_net [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 m_axi_net ]
   set_property -dict [ list \
    CONFIG.ADDR_WIDTH {32} \
@@ -92,6 +384,7 @@ proc create_root_design { parentCell } {
    CONFIG.NUM_WRITE_OUTSTANDING {2} \
    CONFIG.PROTOCOL {AXI4LITE} \
    ] $m_axi_net
+
   set m_axi_xbar [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 m_axi_xbar ]
   set_property -dict [ list \
    CONFIG.ADDR_WIDTH {32} \
@@ -107,6 +400,12 @@ proc create_root_design { parentCell } {
    CONFIG.NUM_WRITE_OUTSTANDING {2} \
    CONFIG.PROTOCOL {AXI4LITE} \
    ] $m_axi_xbar
+
+  set m_axis_dma [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 m_axis_dma ]
+  set_property -dict [ list \
+   CONFIG.FREQ_HZ {200000000} \
+   ] $m_axis_dma
+
   set s_axi_eth_descriptor [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi_eth_descriptor ]
   set_property -dict [ list \
    CONFIG.ADDR_WIDTH {32} \
@@ -124,7 +423,7 @@ proc create_root_design { parentCell } {
    CONFIG.HAS_REGION {0} \
    CONFIG.HAS_RRESP {1} \
    CONFIG.HAS_WSTRB {1} \
-   CONFIG.ID_WIDTH {5} \
+   CONFIG.ID_WIDTH {0} \
    CONFIG.MAX_BURST_LENGTH {16} \
    CONFIG.NUM_READ_OUTSTANDING {8} \
    CONFIG.NUM_READ_THREADS {1} \
@@ -138,38 +437,21 @@ proc create_root_design { parentCell } {
    CONFIG.WUSER_BITS_PER_BYTE {0} \
    CONFIG.WUSER_WIDTH {0} \
    ] $s_axi_eth_descriptor
-  set S_AXI_HP0 [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S_AXI_HP0 ]
+
+  set s_axis_dma [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 s_axis_dma ]
   set_property -dict [ list \
-   CONFIG.ADDR_WIDTH {32} \
-   CONFIG.ARUSER_WIDTH {0} \
-   CONFIG.AWUSER_WIDTH {0} \
-   CONFIG.BUSER_WIDTH {0} \
-   CONFIG.DATA_WIDTH {64} \
-   CONFIG.FREQ_HZ {40000000} \
-   CONFIG.HAS_BRESP {1} \
-   CONFIG.HAS_BURST {1} \
-   CONFIG.HAS_CACHE {1} \
-   CONFIG.HAS_LOCK {1} \
-   CONFIG.HAS_PROT {1} \
-   CONFIG.HAS_QOS {1} \
-   CONFIG.HAS_REGION {0} \
-   CONFIG.HAS_RRESP {1} \
-   CONFIG.HAS_WSTRB {1} \
-   CONFIG.ID_WIDTH {5} \
-   CONFIG.MAX_BURST_LENGTH {16} \
-   CONFIG.NUM_READ_OUTSTANDING {8} \
-   CONFIG.NUM_READ_THREADS {1} \
-   CONFIG.NUM_WRITE_OUTSTANDING {8} \
-   CONFIG.NUM_WRITE_THREADS {1} \
-   CONFIG.PROTOCOL {AXI4} \
-   CONFIG.READ_WRITE_MODE {READ_WRITE} \
-   CONFIG.RUSER_BITS_PER_BYTE {0} \
-   CONFIG.RUSER_WIDTH {0} \
-   CONFIG.SUPPORTS_NARROW_BURST {1} \
-   CONFIG.WUSER_BITS_PER_BYTE {0} \
-   CONFIG.WUSER_WIDTH {0} \
-   ] $S_AXI_HP0
-  set USBIND_0 [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:usbctrl_rtl:1.0 USBIND_0 ]
+   CONFIG.FREQ_HZ {200000000} \
+   CONFIG.HAS_TKEEP {0} \
+   CONFIG.HAS_TLAST {1} \
+   CONFIG.HAS_TREADY {1} \
+   CONFIG.HAS_TSTRB {0} \
+   CONFIG.LAYERED_METADATA {undef} \
+   CONFIG.TDATA_NUM_BYTES {8} \
+   CONFIG.TDEST_WIDTH {4} \
+   CONFIG.TID_WIDTH {0} \
+   CONFIG.TUSER_WIDTH {0} \
+   ] $s_axis_dma
+
 
   # Create ports
   set DDR_VRN [ create_bd_port -dir IO DDR_VRN ]
@@ -224,6 +506,7 @@ proc create_root_design { parentCell } {
   set S_AXI_GP0_ARESETN [ create_bd_port -dir I -type rst S_AXI_GP0_ARESETN ]
   set S_AXI_HP0_ACLK [ create_bd_port -dir I -type clk S_AXI_HP0_ACLK ]
   set_property -dict [ list \
+   CONFIG.ASSOCIATED_RESET {S_AXI_HP0_ARESETN} \
    CONFIG.FREQ_HZ {40000000} \
  ] $S_AXI_HP0_ACLK
   set S_AXI_HP0_ARESETN [ create_bd_port -dir I -type rst S_AXI_HP0_ARESETN ]
@@ -236,29 +519,29 @@ proc create_root_design { parentCell } {
   set bus_rstn [ create_bd_port -dir I -type rst bus_rstn ]
   set clk40 [ create_bd_port -dir I -type clk clk40 ]
   set_property -dict [ list \
-   CONFIG.ASSOCIATED_BUSIF {m_axi_net:m_axi_xbar:m_axi_eth_dma} \
+   CONFIG.ASSOCIATED_BUSIF {m_axi_net:m_axi_xbar:m_axi_eth_dma:m_axi_eth_internal} \
    CONFIG.ASSOCIATED_RESET {clk40_rstn} \
    CONFIG.FREQ_HZ {40000000} \
  ] $clk40
   set clk40_rstn [ create_bd_port -dir I -type rst clk40_rstn ]
-  # Create instance: axi_interconnect_hp0, and set properties
-  set axi_interconnect_hp0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_interconnect_hp0 ]
-  set_property -dict [ list \
-   CONFIG.ENABLE_ADVANCED_OPTIONS {0} \
-   CONFIG.NUM_MI {1} \
-   CONFIG.NUM_SI {2} \
- ] $axi_interconnect_hp0
-
 
   # Create instance: axi_interconnect_0, and set properties
   set axi_interconnect_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_interconnect_0 ]
   set_property -dict [ list \
    CONFIG.ENABLE_ADVANCED_OPTIONS {0} \
-   CONFIG.NUM_MI {6} \
+   CONFIG.NUM_MI {5} \
  ] $axi_interconnect_0
 
+  # Create instance: axi_interconnect_hp0, and set properties
+  set axi_interconnect_hp0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect:2.1 axi_interconnect_hp0 ]
+  set_property -dict [ list \
+   CONFIG.ENABLE_ADVANCED_OPTIONS {0} \
+   CONFIG.NUM_MI {1} \
+   CONFIG.NUM_SI {3} \
+ ] $axi_interconnect_hp0
+
   # Create instance: dma
-  create_hier_cell_dma [current_bd_instance .] dma 6
+  create_hier_cell_dma [current_bd_instance .] dma
 
   # Create instance: processing_system7_0, and set properties
   set processing_system7_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:processing_system7:5.5 processing_system7_0 ]
@@ -702,22 +985,22 @@ proc create_root_design { parentCell } {
 
   # Create interface connections
   connect_bd_intf_net -intf_net S00_AXI_1 [get_bd_intf_pins axi_interconnect_0/S00_AXI] [get_bd_intf_pins processing_system7_0/M_AXI_GP0]
-  connect_bd_intf_net -intf_net s_axi_eth_descriptor_1 [get_bd_intf_ports s_axi_eth_descriptor] [get_bd_intf_pins axi_interconnect_hp0/S01_AXI]
   connect_bd_intf_net -intf_net S_AXI_HP0_1 [get_bd_intf_ports S_AXI_HP0] [get_bd_intf_pins axi_interconnect_hp0/S00_AXI]
   connect_bd_intf_net -intf_net axi_interconnect_0_M00_AXI [get_bd_intf_ports m_axi_eth_dma] [get_bd_intf_pins axi_interconnect_0/M00_AXI]
   connect_bd_intf_net -intf_net axi_interconnect_0_M01_AXI [get_bd_intf_ports m_axi_net] [get_bd_intf_pins axi_interconnect_0/M01_AXI]
   connect_bd_intf_net -intf_net axi_interconnect_0_M02_AXI [get_bd_intf_ports m_axi_xbar] [get_bd_intf_pins axi_interconnect_0/M02_AXI]
-  connect_bd_intf_net -intf_net axi_interconnect_0_M05_AXI [get_bd_intf_pins axi_interconnect_0/M05_AXI] [get_bd_intf_pins dma/s_axi_tx_dmac]
+  connect_bd_intf_net -intf_net axi_interconnect_0_M03_AXI [get_bd_intf_pins axi_interconnect_0/M03_AXI] [get_bd_intf_pins dma/s_axi_dmac]
+  connect_bd_intf_net -intf_net axi_interconnect_0_M04_AXI [get_bd_intf_ports m_axi_eth_internal] [get_bd_intf_pins axi_interconnect_0/M04_AXI]
   connect_bd_intf_net -intf_net axi_protocol_converter_hp0_M_AXI [get_bd_intf_pins axi_interconnect_hp0/M00_AXI] [get_bd_intf_pins processing_system7_0/S_AXI_HP0]
+  connect_bd_intf_net -intf_net dma_M_AXI_DMA_SG [get_bd_intf_pins axi_interconnect_hp0/S02_AXI] [get_bd_intf_pins dma/M_AXI_DMA_SG]
   connect_bd_intf_net -intf_net dma_M_AXI_RX_DMA [get_bd_intf_pins dma/M_AXI_RX_DMA] [get_bd_intf_pins processing_system7_0/S_AXI_HP1]
   connect_bd_intf_net -intf_net dma_M_AXI_TX_DMA [get_bd_intf_pins dma/M_AXI_TX_DMA] [get_bd_intf_pins processing_system7_0/S_AXI_HP2]
-  connect_bd_intf_net -intf_net s_axis_dma_1 [get_bd_intf_ports s_axis_dma] [get_bd_intf_pins dma/s_axis_dma]
   connect_bd_intf_net -intf_net m_axis_dma_1 [get_bd_intf_ports m_axis_dma] [get_bd_intf_pins dma/m_axis_dma]
   connect_bd_intf_net -intf_net processing_system7_0_DDR [get_bd_intf_ports DDR] [get_bd_intf_pins processing_system7_0/DDR]
   connect_bd_intf_net -intf_net processing_system7_0_GPIO_0 [get_bd_intf_ports GPIO_0] [get_bd_intf_pins processing_system7_0/GPIO_0]
   connect_bd_intf_net -intf_net processing_system7_0_USBIND_0 [get_bd_intf_ports USBIND_0] [get_bd_intf_pins processing_system7_0/USBIND_0]
-  connect_bd_intf_net -intf_net s_axi_regfile_1 [get_bd_intf_pins axi_interconnect_0/M03_AXI] [get_bd_intf_pins dma/s_axi_regfile]
-  connect_bd_intf_net -intf_net s_axi_rx_dmac_1 [get_bd_intf_pins axi_interconnect_0/M04_AXI] [get_bd_intf_pins dma/s_axi_rx_dmac]
+  connect_bd_intf_net -intf_net s_axi_eth_descriptor_1 [get_bd_intf_ports s_axi_eth_descriptor] [get_bd_intf_pins axi_interconnect_hp0/S01_AXI]
+  connect_bd_intf_net -intf_net s_axis_dma_1 [get_bd_intf_ports s_axis_dma] [get_bd_intf_pins dma/s_axis_dma]
 
   # Create port connections
   connect_bd_net -net IRQ_F2P_1 [get_bd_ports IRQ_F2P] [get_bd_pins xlslice_2/Din]
@@ -731,12 +1014,12 @@ proc create_root_design { parentCell } {
   connect_bd_net -net SPI1_SS_I_0_1 [get_bd_ports SPI1_SS_I] [get_bd_pins processing_system7_0/SPI1_SS_I]
   connect_bd_net -net S_AXI_GP0_ACLK_1 [get_bd_ports S_AXI_GP0_ACLK] [get_bd_pins axi_interconnect_0/ACLK]
   connect_bd_net -net S_AXI_GP0_ARESETN_1 [get_bd_ports S_AXI_GP0_ARESETN] [get_bd_pins axi_interconnect_0/ARESETN]
-  connect_bd_net -net S_AXI_HP0_ACLK_1 [get_bd_ports S_AXI_HP0_ACLK] [get_bd_pins axi_interconnect_hp0/ACLK] [get_bd_pins axi_interconnect_hp0/M00_ACLK] [get_bd_pins axi_interconnect_hp0/S00_ACLK] [get_bd_pins axi_interconnect_hp0/S01_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP0_ACLK]
-  connect_bd_net -net S_AXI_HP0_ARESETN_1 [get_bd_ports S_AXI_HP0_ARESETN] [get_bd_pins axi_interconnect_hp0/ARESETN] [get_bd_pins axi_interconnect_hp0/M00_ARESETN] [get_bd_pins axi_interconnect_hp0/S00_ARESETN] [get_bd_pins axi_interconnect_hp0/S01_ARESETN]
-  connect_bd_net -net bus_clk [get_bd_ports bus_clk] [get_bd_pins dma/bus_clk]
-  connect_bd_net -net bus_rstn [get_bd_ports bus_rstn] [get_bd_pins dma/bus_rstn]
-  connect_bd_net -net clk40 [get_bd_ports clk40] [get_bd_pins axi_interconnect_0/M00_ACLK] [get_bd_pins axi_interconnect_0/M01_ACLK] [get_bd_pins axi_interconnect_0/M02_ACLK] [get_bd_pins axi_interconnect_0/M04_ACLK] [get_bd_pins axi_interconnect_0/M05_ACLK] [get_bd_pins axi_interconnect_0/M03_ACLK] [get_bd_pins axi_interconnect_0/S00_ACLK] [get_bd_pins dma/clk40] [get_bd_pins processing_system7_0/M_AXI_GP0_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP1_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP2_ACLK]
-  connect_bd_net -net clk40_rstn [get_bd_ports clk40_rstn] [get_bd_pins axi_interconnect_0/M00_ARESETN] [get_bd_pins axi_interconnect_0/M01_ARESETN] [get_bd_pins axi_interconnect_0/M02_ARESETN] [get_bd_pins axi_interconnect_0/M04_ARESETN] [get_bd_pins axi_interconnect_0/M05_ARESETN] [get_bd_pins axi_interconnect_0/M03_ARESETN] [get_bd_pins axi_interconnect_0/S00_ARESETN] [get_bd_pins dma/clk40_rstn]
+  connect_bd_net -net S_AXI_HP0_ACLK_1 [get_bd_ports S_AXI_HP0_ACLK] [get_bd_pins axi_interconnect_hp0/M00_ACLK] [get_bd_pins axi_interconnect_hp0/S00_ACLK] [get_bd_pins axi_interconnect_hp0/S01_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP0_ACLK]
+  connect_bd_net -net S_AXI_HP0_ARESETN_1 [get_bd_ports S_AXI_HP0_ARESETN] [get_bd_pins axi_interconnect_hp0/M00_ARESETN] [get_bd_pins axi_interconnect_hp0/S00_ARESETN] [get_bd_pins axi_interconnect_hp0/S01_ARESETN]
+  connect_bd_net -net bus_clk [get_bd_ports bus_clk] [get_bd_pins axi_interconnect_hp0/ACLK] [get_bd_pins axi_interconnect_hp0/S02_ACLK] [get_bd_pins dma/bus_clk] [get_bd_pins processing_system7_0/S_AXI_HP1_ACLK] [get_bd_pins processing_system7_0/S_AXI_HP2_ACLK]
+  connect_bd_net -net bus_rstn [get_bd_ports bus_rstn] [get_bd_pins axi_interconnect_hp0/ARESETN] [get_bd_pins axi_interconnect_hp0/S02_ARESETN] [get_bd_pins dma/bus_rstn]
+  connect_bd_net -net clk40 [get_bd_ports clk40] [get_bd_pins axi_interconnect_0/M00_ACLK] [get_bd_pins axi_interconnect_0/M01_ACLK] [get_bd_pins axi_interconnect_0/M02_ACLK] [get_bd_pins axi_interconnect_0/M03_ACLK] [get_bd_pins axi_interconnect_0/M04_ACLK] [get_bd_pins axi_interconnect_0/S00_ACLK] [get_bd_pins dma/clk40] [get_bd_pins processing_system7_0/M_AXI_GP0_ACLK]
+  connect_bd_net -net clk40_rstn [get_bd_ports clk40_rstn] [get_bd_pins axi_interconnect_0/M00_ARESETN] [get_bd_pins axi_interconnect_0/M01_ARESETN] [get_bd_pins axi_interconnect_0/M02_ARESETN] [get_bd_pins axi_interconnect_0/M03_ARESETN] [get_bd_pins axi_interconnect_0/M04_ARESETN] [get_bd_pins axi_interconnect_0/S00_ARESETN] [get_bd_pins dma/clk40_rstn]
   connect_bd_net -net ddr_vrn [get_bd_ports DDR_VRN] [get_bd_pins processing_system7_0/DDR_VRN]
   connect_bd_net -net ddr_vrp [get_bd_ports DDR_VRP] [get_bd_pins processing_system7_0/DDR_VRP]
   connect_bd_net -net dma_tx_irq [get_bd_pins dma/tx_irq] [get_bd_pins xlconcat_0/In2]
@@ -774,41 +1057,27 @@ proc create_root_design { parentCell } {
   connect_bd_net -net xlslice_2_Dout [get_bd_pins xlconcat_0/In0] [get_bd_pins xlslice_2/Dout]
 
   # Create address segments
+  create_bd_addr_seg -range 0x00004000 -offset 0x40020000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/axi_dma_eth_internal/S_AXI_LITE/Reg] SEG_axi_dma_eth_internal_Reg
   create_bd_addr_seg -range 0x00004000 -offset 0x40000000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs m_axi_eth_dma/Reg] SEG_m_axi_eth_dma_Reg
+  create_bd_addr_seg -range 0x00004000 -offset 0x40030000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs m_axi_eth_internal/Reg] SEG_m_axi_eth_internal_Reg
   create_bd_addr_seg -range 0x00004000 -offset 0x40004000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs m_axi_net/Reg] SEG_m_axi_net_Reg
   create_bd_addr_seg -range 0x00004000 -offset 0x40010000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs m_axi_xbar/Reg] SEG_m_axi_xbar_Reg
-  create_bd_addr_seg -range 0x00001000 -offset 0x42080000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/axi_regfile_0/S_AXI/regs] SEG_axi_regfile_0_regs
-  create_bd_addr_seg -range 0x00010000 -offset 0x43C00000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/rx/dma0/axi_rx_dmac/s_axi/axi_lite] SEG_axi_rx_dmac_axi_lite
-  create_bd_addr_seg -range 0x00010000 -offset 0x43C10000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/rx/dma1/axi_rx_dmac/s_axi/axi_lite] SEG_axi_rx_dmac_axi_lite4
-  create_bd_addr_seg -range 0x00010000 -offset 0x43C20000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/rx/dma2/axi_rx_dmac/s_axi/axi_lite] SEG_axi_rx_dmac_axi_lite6
-  create_bd_addr_seg -range 0x00010000 -offset 0x43C30000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/rx/dma3/axi_rx_dmac/s_axi/axi_lite] SEG_axi_rx_dmac_axi_lite8
-  create_bd_addr_seg -range 0x00010000 -offset 0x43C40000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/rx/dma4/axi_rx_dmac/s_axi/axi_lite] SEG_axi_rx_dmac_axi_lite10
-  create_bd_addr_seg -range 0x00010000 -offset 0x43C50000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/rx/dma5/axi_rx_dmac/s_axi/axi_lite] SEG_axi_rx_dmac_axi_lite12
-  create_bd_addr_seg -range 0x00010000 -offset 0x43CA0000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/tx/axi_tx_dmac_0/s_axi/axi_lite] SEG_axi_tx_dmac_0_axi_lite
-  create_bd_addr_seg -range 0x00010000 -offset 0x43CB0000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/tx/axi_tx_dmac_1/s_axi/axi_lite] SEG_axi_tx_dmac_1_axi_lite
-  create_bd_addr_seg -range 0x00010000 -offset 0x43CC0000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/tx/axi_tx_dmac_2/s_axi/axi_lite] SEG_axi_tx_dmac_2_axi_lite
-  create_bd_addr_seg -range 0x00010000 -offset 0x43CD0000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/tx/axi_tx_dmac_3/s_axi/axi_lite] SEG_axi_tx_dmac_3_axi_lite
-  create_bd_addr_seg -range 0x00010000 -offset 0x43CE0000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/tx/axi_tx_dmac_4/s_axi/axi_lite] SEG_axi_tx_dmac_4_axi_lite
-  create_bd_addr_seg -range 0x00010000 -offset 0x43CF0000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs dma/tx/axi_tx_dmac_5/s_axi/axi_lite] SEG_axi_tx_dmac_5_axi_lite
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/tx/axi_tx_dmac_0/m_src_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_DDR_LOWOCM] SEG_processing_system7_0_HP2_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/tx/axi_tx_dmac_1/m_src_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_DDR_LOWOCM] SEG_processing_system7_0_HP2_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/tx/axi_tx_dmac_2/m_src_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_DDR_LOWOCM] SEG_processing_system7_0_HP2_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/tx/axi_tx_dmac_3/m_src_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_DDR_LOWOCM] SEG_processing_system7_0_HP2_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/tx/axi_tx_dmac_4/m_src_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_DDR_LOWOCM] SEG_processing_system7_0_HP2_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/tx/axi_tx_dmac_5/m_src_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_DDR_LOWOCM] SEG_processing_system7_0_HP2_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/rx/dma0/axi_rx_dmac/m_dest_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/rx/dma1/axi_rx_dmac/m_dest_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/rx/dma2/axi_rx_dmac/m_dest_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/rx/dma3/axi_rx_dmac/m_dest_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/rx/dma4/axi_rx_dmac/m_dest_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
-  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/rx/dma5/axi_rx_dmac/m_dest_axi] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
+  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/axi_dma_eth_internal/Data_SG] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM] SEG_processing_system7_0_HP0_DDR_LOWOCM
+  create_bd_addr_seg -range 0x00040000 -offset 0xFFFC0000 [get_bd_addr_spaces dma/axi_dma_eth_internal/Data_SG] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_HIGH_OCM] SEG_processing_system7_0_HP0_HIGH_OCM
+  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/axi_dma_eth_internal/Data_S2MM] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_DDR_LOWOCM] SEG_processing_system7_0_HP1_DDR_LOWOCM
+  create_bd_addr_seg -range 0x00040000 -offset 0xFFFC0000 [get_bd_addr_spaces dma/axi_dma_eth_internal/Data_S2MM] [get_bd_addr_segs processing_system7_0/S_AXI_HP1/HP1_HIGH_OCM] SEG_processing_system7_0_HP1_HIGH_OCM
+  create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces dma/axi_dma_eth_internal/Data_MM2S] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_DDR_LOWOCM] SEG_processing_system7_0_HP2_DDR_LOWOCM
+  create_bd_addr_seg -range 0x00040000 -offset 0xFFFC0000 [get_bd_addr_spaces dma/axi_dma_eth_internal/Data_MM2S] [get_bd_addr_segs processing_system7_0/S_AXI_HP2/HP2_HIGH_OCM] SEG_processing_system7_0_HP2_HIGH_OCM
   create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces s_axi_eth_descriptor] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM] SEG_processing_system7_0_GP0_DDR_LOWOCM
   create_bd_addr_seg -range 0x40000000 -offset 0x00000000 [get_bd_addr_spaces S_AXI_HP0] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_DDR_LOWOCM] SEG_processing_system7_0_HP0_DDR_LOWOCM
+  create_bd_addr_seg -range 0x00040000 -offset 0xFFFC0000 [get_bd_addr_spaces S_AXI_HP0] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_HIGH_OCM] SEG_processing_system7_0_HP0_HIGH_OCM
+  create_bd_addr_seg -range 0x00040000 -offset 0xFFFC0000 [get_bd_addr_spaces s_axi_eth_descriptor] [get_bd_addr_segs processing_system7_0/S_AXI_HP0/HP0_HIGH_OCM] SEG_processing_system7_0_HP0_HIGH_OCM
 
 
   # Restore current instance
   current_bd_instance $oldCurInst
 
+  validate_bd_design
   save_bd_design
 }
 # End of create_root_design()