fpga: lib: add Intel MAX10 architecture for 2clk FIFO

This commit derives parameters for MAX10 devices if provided by the
DEVICE parameter.

MAX10 devices FIFO generator support up to 36 bit wide FIFOs using
embedded memory (M9K) in simple dual port mode, which is treated
equally to RAM in the parameters.

In combination with sorting the ctrlport signals by usage, the used
resources can be reduced on the MAX10 devices from 6 to 3 M9K blocks
for a ctrlport_clk_cross instance without time and portids.

1 files changed, 25 insertions, 20 deletions

diff --git a/fpga/usrp3/lib/rfnoc/utils/ctrlport_clk_cross.v b/fpga/usrp3/lib/rfnoc/utils/ctrlport_clk_cross.v
index 6aa74c74f..6cd45b86b 100644
--- a/fpga/usrp3/lib/rfnoc/utils/ctrlport_clk_cross.v
+++ b/fpga/usrp3/lib/rfnoc/utils/ctrlport_clk_cross.v
@@ -11,8 +11,9 @@
 //
 
 
-module ctrlport_clk_cross (
-
+module ctrlport_clk_cross #(
+  parameter DEVICE = "7SERIES" // FPGA technology identifier (for optimal FIFO inference)
+)(
   input wire rst, // Can be either clock domain, but must be glitch-free
 
   //---------------------------------------------------------------------------
@@ -58,7 +59,7 @@ module ctrlport_clk_cross (
   // Slave to Master Clock Crossing (Request)
   //---------------------------------------------------------------------------
 
-  localparam REQ_W = 
+  localparam REQ_W =
     1  + // ctrlport_req_wr
     1  + // ctrlport_req_rd
     20 + // ctrlport_req_addr
@@ -76,22 +77,25 @@ module ctrlport_clk_cross (
   wire              m_ctrlport_req_wr_tmp;
   wire              m_ctrlport_req_rd_tmp;
 
+  // Sort by descreasing order of usage possibility.
+  // This way instance, which do not need port IDs, time etc. can save the MSBs.
   assign s_req_flat = {
-    s_ctrlport_req_wr,
-    s_ctrlport_req_rd,
-    s_ctrlport_req_addr,
     s_ctrlport_req_portid,
     s_ctrlport_req_rem_epid,
     s_ctrlport_req_rem_portid,
-    s_ctrlport_req_data,
-    s_ctrlport_req_byte_en,
     s_ctrlport_req_has_time,
-    s_ctrlport_req_time
+    s_ctrlport_req_time,
+    s_ctrlport_req_byte_en,
+    s_ctrlport_req_data,
+    s_ctrlport_req_addr,
+    s_ctrlport_req_wr,
+    s_ctrlport_req_rd
   };
 
   axi_fifo_2clk #(
-    .WIDTH (REQ_W),
-    .SIZE  (3)
+    .WIDTH  (REQ_W),
+    .SIZE   (3),
+    .DEVICE (DEVICE)
   ) req_fifo (
     .reset    (rst),
     .i_aclk   (s_ctrlport_clk),
@@ -105,16 +109,16 @@ module ctrlport_clk_cross (
   );
 
   assign {
-    m_ctrlport_req_wr_tmp,
-    m_ctrlport_req_rd_tmp,
-    m_ctrlport_req_addr,
     m_ctrlport_req_portid,
     m_ctrlport_req_rem_epid,
     m_ctrlport_req_rem_portid,
-    m_ctrlport_req_data,
-    m_ctrlport_req_byte_en,
     m_ctrlport_req_has_time,
-    m_ctrlport_req_time
+    m_ctrlport_req_time,
+    m_ctrlport_req_byte_en,
+    m_ctrlport_req_data,
+    m_ctrlport_req_addr,
+    m_ctrlport_req_wr_tmp,
+    m_ctrlport_req_rd_tmp
   } = m_req_flat;
 
   assign m_ctrlport_req_wr = m_ctrlport_req_wr_tmp & m_req_flat_valid;
@@ -125,7 +129,7 @@ module ctrlport_clk_cross (
   // Master to Slave Clock Crossing (Response)
   //---------------------------------------------------------------------------
 
-  localparam RESP_W = 
+  localparam RESP_W =
     1  + // ctrlport_resp_ack,
     2  + // ctrlport_resp_status,
     32;  // ctrlport_resp_data
@@ -142,8 +146,9 @@ module ctrlport_clk_cross (
   };
 
   axi_fifo_2clk #(
-    .WIDTH (RESP_W),
-    .SIZE  (3)
+    .WIDTH  (RESP_W),
+    .SIZE   (3),
+    .DEVICE (DEVICE)
   ) resp_fifo (
     .reset    (rst),
     .i_aclk   (m_ctrlport_clk),