Merge branch 'flow_control_fpga' into flow_ctrl

7 files changed, 304 insertions, 115 deletions

diff --git a/fpga/usrp2/extramfifo/Makefile.srcs b/fpga/usrp2/extramfifo/Makefile.srcs
index 7cd49f4f6..b255ef916 100644
--- a/fpga/usrp2/extramfifo/Makefile.srcs
+++ b/fpga/usrp2/extramfifo/Makefile.srcs
@@ -13,4 +13,5 @@ icon.v \
 icon.xco \
 ila.v \
 ila.xco \
+refill_randomizer.v \
 ))
diff --git a/fpga/usrp2/extramfifo/ext_fifo.v b/fpga/usrp2/extramfifo/ext_fifo.v
index 2af59a75d..6888617a7 100644
--- a/fpga/usrp2/extramfifo/ext_fifo.v
+++ b/fpga/usrp2/extramfifo/ext_fifo.v
@@ -18,7 +18,7 @@
  //`define NO_EXT_FIFO
 
 module ext_fifo
-   #(parameter INT_WIDTH=36,EXT_WIDTH=18,RAM_DEPTH=19,FIFO_DEPTH=19)
+  #(parameter INT_WIDTH=36,EXT_WIDTH=18,RAM_DEPTH=19,FIFO_DEPTH=19)
     (
      input int_clk,
      input ext_clk,
@@ -44,34 +44,29 @@ module ext_fifo
 
    wire [EXT_WIDTH-1:0] write_data;
    wire [EXT_WIDTH-1:0] read_data;
-   wire 	    full1, empty1;
-   wire 	    almost_full2, full2, empty2;
+   wire 		full1, empty1;
+   wire 		almost_full2, full2, empty2;
    wire [INT_WIDTH-1:0] data_to_fifo;
    wire [INT_WIDTH-1:0] data_from_fifo;
    wire [FIFO_DEPTH-1:0] capacity;
-		
+   wire 		 space_avail;
+   wire 		 data_avail;
+		 
+   // These next 2 lines here purely because ICARUS is crap at handling generate statements.
+   // Empirically this has been determined to make simulations work.
+   wire 		 read_input_fifo = space_avail & ~empty1;
+   wire 		 write_output_fifo = data_avail;
    
-   // FIFO buffers data from UDP engine into external FIFO clock domain.
-   fifo_xlnx_512x36_2clk_36to18 fifo_xlnx_512x36_2clk_36to18_i1 (
-								 .rst(rst),
-								 .wr_clk(int_clk),
-								 .rd_clk(ext_clk),
-								 .din(datain), // Bus [35 : 0]						
-								 .wr_en(src_rdy_i),						
-								 .rd_en(space_avail&~empty1),						
-								 .dout(write_data), // Bus [17 : 0] 
-								 .full(full1),			
-							         .empty(empty1));
-
-    assign 	    dst_rdy_o = ~full1;
+   assign 		 src_rdy_o = ~empty2;
+   assign 		 dst_rdy_o = ~full1;
 
 `ifdef NO_EXT_FIFO
-   assign 	    space_avail = ~full2;
-   assign 	    data_avail = ~empty1;
-   assign 	    read_data = write_data;
+   assign 		 space_avail = ~full2;
+   assign 		 data_avail = ~empty1;
+   assign 		 read_data = write_data;
 `else
    
-   // External FIFO running at ext clock rate  and 18 bit width.
+   // External FIFO running at ext clock rate  and 18 or 36 bit width.
    nobl_fifo  #(.WIDTH(EXT_WIDTH),.RAM_DEPTH(RAM_DEPTH),.FIFO_DEPTH(FIFO_DEPTH))
      nobl_fifo_i1
        (   
@@ -90,27 +85,80 @@ module ext_fifo
 	   .write_strobe(~empty1 ),
 	   .space_avail(space_avail),
 	   .read_data(read_data),
-	   .read_strobe(~almost_full2),
+	   .read_strobe(~almost_full2_spread),
 	   .data_avail(data_avail),
 	   .capacity(capacity)
 	   );
 `endif // !`ifdef NO_EXT_FIFO
+
+   
+   generate
+      if (EXT_WIDTH == 18 && INT_WIDTH == 36) begin: fifo_g1
+	 // FIFO buffers data from UDP engine into external FIFO clock domain.
+	 fifo_xlnx_512x36_2clk_36to18 fifo_xlnx_512x36_2clk_36to18_i1 (
+								       .rst(rst),
+								       .wr_clk(int_clk),
+								       .rd_clk(ext_clk),
+								       .din(datain), // Bus [35 : 0] 
+								       .wr_en(src_rdy_i), 
+								       .rd_en(read_input_fifo),    		
+								       .dout(write_data), // Bus [17 : 0]
+								       .full(full1),			
+							               .empty(empty1));
+
+	 
+	 // FIFO buffers data read from external FIFO into DSP clk domain and to TX DSP.
+	 fifo_xlnx_512x36_2clk_18to36 fifo_xlnx_512x36_2clk_18to36_i1 (
+								       .rst(rst),
+								       .wr_clk(ext_clk),
+								       .rd_clk(int_clk),
+								       .din(read_data), // Bus [17 : 0]
+								       .wr_en(write_output_fifo),
+								       .rd_en(dst_rdy_i),
+								       .dout(dataout), // Bus [35 : 0]
+								       .full(full2),
+								       .prog_full(almost_full2),
+								       .empty(empty2));
+      end // block: fifo_g1
+      else if (EXT_WIDTH == 36 && INT_WIDTH == 36) begin: fifo_g1
+	 // FIFO buffers data from UDP engine into external FIFO clock domain.
+	 fifo_xlnx_32x36_2clk fifo_xlnx_32x36_2clk_i1 (
+						       .rst(rst),
+						       .wr_clk(int_clk),
+						       .rd_clk(ext_clk),
+						       .din(datain), // Bus [35 : 0] 
+						       .wr_en(src_rdy_i),
+						       .rd_en(read_input_fifo),
+						       .dout(write_data), // Bus [35 : 0] 
+						       .full(full1),
+						       .empty(empty1));
+	 
+	 // FIFO buffers data read from external FIFO into DSP clk domain and to TX DSP.
+	 fifo_xlnx_32x36_2clk fifo_xlnx_32x36_2clk_i2 (
+						       .rst(rst),
+						       .wr_clk(ext_clk),
+						       .rd_clk(int_clk),
+						       .din(read_data), // Bus [35 : 0] 
+						       .wr_en(write_output_fifo),
+						       .rd_en(dst_rdy_i),
+						       .dout(dataout), // Bus [35 : 0] 
+						       .full(full2),
+						       .empty(empty2),
+						       .prog_full(almost_full2));
+
+      end    
+   endgenerate
    
- 
-   // FIFO buffers data read from external FIFO into DSP clk domain and to TX DSP.
-   fifo_xlnx_512x36_2clk_18to36 fifo_xlnx_512x36_2clk_18to36_i1 (
-								 .rst(rst),
-								 .wr_clk(ext_clk),
-								 .rd_clk(int_clk),
-								 .din(read_data), // Bus [17 : 0]
-								 .wr_en(data_avail),
-								 .rd_en(dst_rdy_i),
-								 .dout(dataout), // Bus [35 : 0]
-								 .full(full2),
-								 .prog_full(almost_full2),
-								 .empty(empty2));
-   assign  src_rdy_o = ~empty2;
 
+   refill_randomizer #(.BITS(7))
+     refill_randomizer_i1 (
+			   .clk(ext_clk),
+			   .rst(rst),
+			   .full_in(almost_full2),
+			   .full_out(almost_full2_spread)
+			   );
+   
+   
    always @ (posedge int_clk)
      debug[31:28] <= {empty2,full1,dst_rdy_i,src_rdy_i };
    
@@ -118,6 +166,7 @@ module ext_fifo
      debug[27:0] <= {RAM_WEn,RAM_CE1n,RAM_A[3:0],read_data[17:0],empty1,space_avail,data_avail,almost_full2 };
 
    always@ (posedge ext_clk)
-//     debug2[31:0] <= {write_data[15:0],read_data[15:0]};
-       debug2[31:0] <= 0;
+     //     debug2[31:0] <= {write_data[15:0],read_data[15:0]};
+     debug2[31:0] <= 0;
+   
 endmodule // ext_fifo
diff --git a/fpga/usrp2/extramfifo/ext_fifo_tb.sav b/fpga/usrp2/extramfifo/ext_fifo_tb.sav
new file mode 100644
index 000000000..a54b40fc5
--- /dev/null
+++ b/fpga/usrp2/extramfifo/ext_fifo_tb.sav
@@ -0,0 +1,30 @@
+[timestart] 0
+[size] 1523 832
+[pos] -1 -1
+*-15.000000 66300 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
+[treeopen] ext_fifo_tb.
+[treeopen] ext_fifo_tb.ext_fifo_i1.
+[treeopen] ext_fifo_tb.ext_fifo_i1.nobl_fifo_i1.
+@28
+ext_fifo_tb.ext_fifo_i1.src_rdy_i
+ext_fifo_tb.ext_fifo_i1.dst_rdy_o
+@22
+ext_fifo_tb.ext_fifo_i1.datain[35:0]
+@28
+ext_fifo_tb.ext_fifo_i1.src_rdy_o
+ext_fifo_tb.ext_fifo_i1.dst_rdy_i
+@22
+ext_fifo_tb.ext_fifo_i1.dataout[35:0]
+ext_fifo_tb.ext_fifo_i1.RAM_A[17:0]
+@28
+ext_fifo_tb.ext_fifo_i1.RAM_WEn
+ext_fifo_tb.ext_fifo_i1.RAM_CE1n
+@22
+ext_fifo_tb.ext_fifo_i1.RAM_D_pi[35:0]
+ext_fifo_tb.ext_fifo_i1.RAM_D_po[35:0]
+ext_fifo_tb.ext_fifo_i1.write_data[35:0]
+@28
+ext_fifo_tb.ext_fifo_i1.full1
+ext_fifo_tb.ext_fifo_i1.empty1
+@29
+ext_fifo_tb.ext_fifo_i1.space_avail
diff --git a/fpga/usrp2/extramfifo/ext_fifo_tb.v b/fpga/usrp2/extramfifo/ext_fifo_tb.v
index 0eda89769..395ad2884 100644
--- a/fpga/usrp2/extramfifo/ext_fifo_tb.v
+++ b/fpga/usrp2/extramfifo/ext_fifo_tb.v
@@ -1,18 +1,31 @@
 `timescale 1ns / 1ps
-`define INT_WIDTH 36
-`define EXT_WIDTH 18
-`define RAM_DEPTH 19
-`define FIFO_DEPTH 8
-`define DUMP_VCD_FULL
-
-module ext_fifo_tb();
+`define USRP2
+//`define USRP2PLUS
 
+`ifdef USRP2
+ `define INT_WIDTH 36
+ `define EXT_WIDTH 18
+ `define RAM_DEPTH 19
+ `define FIFO_DEPTH 8
+ `define DUMP_VCD_FULL
+ `define INT_CLK_PERIOD 5
+ `define EXT_CLK_PERIOD 4
+`elsif USRP2PLUS
+ `define INT_WIDTH 36
+ `define EXT_WIDTH 36
+ `define RAM_DEPTH 18
+ `define FIFO_DEPTH 8
+ `define DUMP_VCD_FULL
+ `define INT_CLK_PERIOD 5
+ `define EXT_CLK_PERIOD 5
+`endif //  `ifdef USRP2
    
+
+module ext_fifo_tb();
+  
    reg int_clk;
    reg ext_clk;
    reg rst;
-   
-
 
    wire [`EXT_WIDTH-1:0] RAM_D_pi;
    wire [`EXT_WIDTH-1:0] RAM_D_po;
@@ -33,7 +46,6 @@ module ext_fifo_tb();
    reg 			dst_rdy_i;
    integer 		ether_frame;
    
-
    // Clocks
    // Int clock is 100MHz
    // Ext clock is 125MHz
@@ -47,10 +59,10 @@ module ext_fifo_tb();
      end
 
    always
-     #5 int_clk <= ~int_clk;
+     #(`INT_CLK_PERIOD/2) int_clk <= ~int_clk;
 
    always
-     #4 ext_clk <= ~ext_clk;
+     #(`EXT_CLK_PERIOD/2) ext_clk <= ~ext_clk;
 
    initial
      begin
@@ -270,7 +282,7 @@ module ext_fifo_tb();
    //
    
    generate  
-      for (i=0;i<18;i=i+1)
+      for (i=0;i<`EXT_WIDTH;i=i+1)
         begin : gen_RAM_D_IO
 
 	   IOBUF #(
@@ -309,28 +321,53 @@ module ext_fifo_tb();
 
    assign 		#2 RAM_A_ext = RAM_A;
    
- 
    
-   idt71v65603s150  idt71v65603s150_i1
-     (
-      .A(RAM_A_ext[17:0]),
-      .adv_ld_(RAM_LDn_ext),                  // advance (high) / load (low)
-      .bw1_(1'b0), 
-      .bw2_(1'b0), 
-      .bw3_(1'b1), 
-      .bw4_(1'b1),   // byte write enables (low)
-      .ce1_(RAM_CE1n_ext), 
-      .ce2(1'b1), 
-      .ce2_(1'b0),          // chip enables
-      .cen_(RAM_CENn_ext),                     // clock enable (low)
-      .clk(ext_clk),                      // clock
-      .IO({RAM_D[16:9],RAM_D[7:0]}), 
-      .IOP({RAM_D[17],RAM_D[8]}),                  // data bus
-      .lbo_(1'b0),                     // linear burst order (low)
-      .oe_(RAM_OEn_ext),                      // output enable (low)
-      .r_w_(RAM_WEn_ext)
-      );                    // read (high) / write (low)
+   generate
+      if (`EXT_WIDTH==18) begin: ram_tb_g1
+	 idt71v65603s150  idt71v65603s150_i1
+	   (
+	    .A(RAM_A_ext[17:0]),
+	    .adv_ld_(RAM_LDn_ext),                  // advance (high) / load (low)
+	    .bw1_(1'b0), 
+	    .bw2_(1'b0),
+	    .bw3_(1'b1), 
+	    .bw4_(1'b1),   // byte write enables (low)
+	    .ce1_(RAM_CE1n_ext), 
+	    .ce2(1'b1), 
+	    .ce2_(1'b0),          // chip enables
+	    .cen_(RAM_CENn_ext),                     // clock enable (low)
+	    .clk(ext_clk),                      // clock
+	    .IO({RAM_D[16:9],RAM_D[7:0]}), 
+	    .IOP({RAM_D[17],RAM_D[8]}),                  // data bus
+	    .lbo_(1'b0),                     // linear burst order (low)
+	    .oe_(RAM_OEn_ext),                      // output enable (low)
+	    .r_w_(RAM_WEn_ext)
+	    );                    // read (high) / write (low)
+      end // block: ram_tb_g1
+      else if (`EXT_WIDTH==36) begin: ram_tb_g1
+	 idt71v65603s150  idt71v65603s150_i1
+	   (
+	    .A(RAM_A_ext[17:0]),
+	    .adv_ld_(RAM_LDn_ext),                  // advance (high) / load (low)
+	    .bw1_(1'b0), 
+	    .bw2_(1'b0),
+	    .bw3_(1'b0), 
+	    .bw4_(1'b0),   // byte write enables (low)
+	    .ce1_(RAM_CE1n_ext), 
+	    .ce2(1'b1), 
+	    .ce2_(1'b0),          // chip enables
+	    .cen_(RAM_CENn_ext),                     // clock enable (low)
+	    .clk(ext_clk),                      // clock
+	    .IO(RAM_D[31:0]), 
+	    .IOP(RAM_D[35:32]),                  // data bus
+	    .lbo_(1'b0),                     // linear burst order (low)
+	    .oe_(RAM_OEn_ext),                      // output enable (low)
+	    .r_w_(RAM_WEn_ext)
+	    );                    // read (high) / write (low)
+      end // block: ram_tb_g1
  
+   endgenerate
+   
 /* -----\/----- EXCLUDED -----\/-----
 
 	 
diff --git a/fpga/usrp2/extramfifo/nobl_if.v b/fpga/usrp2/extramfifo/nobl_if.v
index 391a841e8..adf9f165b 100644
--- a/fpga/usrp2/extramfifo/nobl_if.v
+++ b/fpga/usrp2/extramfifo/nobl_if.v
@@ -39,6 +39,12 @@ module nobl_if
    assign 	   RAM_LDn = 0;
    // ZBT/NoBL RAM actually manages its own output enables very well.
    assign 	   RAM_OEn = 0;
+
+   // gray code the address to reduce EMI
+   wire [DEPTH-1:0] address_gray;
+   
+   bin2gray #(.WIDTH(DEPTH)) bin2gray (.bin(address),.gray(address_gray));
+   
    
    //
    // Pipeline stage 1
@@ -59,7 +65,7 @@ module nobl_if
 	  
 	  if (enable)
 	    begin
-	       address_pipe1 <= address;
+	       address_pipe1 <= address_gray;
 	       write_pipe1 <= write;
 	       RAM_WEn <= ~write;  // Creates IOB flob
 	       
diff --git a/fpga/usrp2/extramfifo/refill_randomizer.v b/fpga/usrp2/extramfifo/refill_randomizer.v
new file mode 100644
index 000000000..0b30f4049
--- /dev/null
+++ b/fpga/usrp2/extramfifo/refill_randomizer.v
@@ -0,0 +1,66 @@
+//
+// EMI mitigation.
+// Process FULL flag from FIFO so that de-assertion
+// (FIFO now not FULL) is delayed by a pseudo random
+// value, but assertion is passed straight through.
+// 
+
+
+module refill_randomizer
+  #(parameter BITS=7)
+    (
+     input clk,
+     input rst,
+     input full_in,
+     output full_out
+     );
+   
+   wire 	    feedback;
+   reg 	    full_last;
+   wire     full_deasserts;
+   reg [6:0] shift_reg;
+   reg [6:0] count;
+   reg 	     delayed_fall;
+   
+
+   always @(posedge clk)
+     full_last <= full_in;
+   
+   assign    full_deasserts = full_last & ~full_in;
+
+   // 7 bit LFSR
+   always @(posedge clk)
+     if (rst)
+       shift_reg <= 7'b1;
+     else
+       if (full_deasserts)
+	 shift_reg <= {shift_reg[5:0],feedback};
+
+   assign    feedback = ^(shift_reg & 7'h41);
+
+   always @(posedge clk)
+     if (rst)
+       begin
+	  count <= 1;
+	  delayed_fall  <= 1;
+       end
+     else if (full_deasserts)
+       begin
+	  count <= shift_reg;
+	  delayed_fall <= 1;
+       end
+     else if (count == 1)
+       begin
+	  count <= 1;
+	  delayed_fall <= 0;
+       end
+     else
+       begin
+	  count <= count - 1;
+	  delayed_fall <= 1;
+       end
+   
+   // Full_out goes instantly high if full_in does. However its fall is delayed.
+   assign    full_out = (full_in == 1) || (full_last == 1) || delayed_fall;
+
+endmodule
\ No newline at end of file
diff --git a/fpga/usrp2/top/u2_rev3/u2_rev3.ucf b/fpga/usrp2/top/u2_rev3/u2_rev3.ucf
index 6e0caedd5..deaeecb53 100644
--- a/fpga/usrp2/top/u2_rev3/u2_rev3.ucf
+++ b/fpga/usrp2/top/u2_rev3/u2_rev3.ucf
@@ -74,49 +74,49 @@ NET "MDC"  LOC = "V18"  ;
 NET "PHY_INTn"  LOC = "AB13"  ; 
 NET "PHY_RESETn"  LOC = "AA19"  ; 
 NET "PHY_CLK"  LOC = "V15"  ; 
-NET "RAM_D[0]"  LOC = "N20" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[1]"  LOC = "N21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[2]"  LOC = "N22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[3]"  LOC = "M17" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[4]"  LOC = "M18" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[5]"  LOC = "M19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[6]"  LOC = "M20" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[7]"  LOC = "M21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[8]"  LOC = "M22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[9]"  LOC = "Y22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[10]"  LOC = "Y21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_D[11]"  LOC = "Y20" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_D[12]"  LOC = "Y19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_D[13]"  LOC = "W22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_D[14]"  LOC = "W21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_D[15]"  LOC = "W20" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_D[16]"  LOC = "W19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_D[17]"  LOC = "V22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[0]"  LOC = "U21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[1]"  LOC = "T19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[2]"  LOC = "V21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[3]"  LOC = "V20" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[4]"  LOC = "T20" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[5]"  LOC = "T21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[6]"  LOC = "T22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[7]"  LOC = "T18" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[8]"  LOC = "R18" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[9]"  LOC = "P19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[10]"  LOC = "P21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[11]"  LOC = "P22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[12]"  LOC = "N19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[13]"  LOC = "N17" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[14]"  LOC = "N18" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[15]"  LOC = "T17" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[16]"  LOC = "U19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[17]"  LOC = "U18" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ;
-NET "RAM_A[18]"  LOC = "V19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST  ;
-NET "RAM_CE1n"  LOC = "U20" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ; 
-NET "RAM_CENn"  LOC = "P18" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ; 
-NET "RAM_CLK"  LOC = "P17" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ; 
-NET "RAM_WEn"  LOC = "R22" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ; 
-NET "RAM_OEn"  LOC = "R21" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ; 
-NET "RAM_LDn"  LOC = "R19" |IOSTANDARD = LVCMOS25  |DRIVE = 12  |SLEW = FAST ; 
+NET "RAM_D[0]"  LOC = "N20" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[1]"  LOC = "N21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[2]"  LOC = "N22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[3]"  LOC = "M17" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[4]"  LOC = "M18" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[5]"  LOC = "M19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[6]"  LOC = "M20" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[7]"  LOC = "M21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[8]"  LOC = "M22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[9]"  LOC = "Y22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[10]"  LOC = "Y21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_D[11]"  LOC = "Y20" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_D[12]"  LOC = "Y19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_D[13]"  LOC = "W22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_D[14]"  LOC = "W21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_D[15]"  LOC = "W20" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_D[16]"  LOC = "W19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_D[17]"  LOC = "V22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[0]"  LOC = "U21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[1]"  LOC = "T19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[2]"  LOC = "V21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[3]"  LOC = "V20" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[4]"  LOC = "T20" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[5]"  LOC = "T21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[6]"  LOC = "T22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[7]"  LOC = "T18" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[8]"  LOC = "R18" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[9]"  LOC = "P19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[10]"  LOC = "P21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[11]"  LOC = "P22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[12]"  LOC = "N19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[13]"  LOC = "N17" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[14]"  LOC = "N18" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[15]"  LOC = "T17" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[16]"  LOC = "U19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[17]"  LOC = "U18" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ;
+NET "RAM_A[18]"  LOC = "V19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW  ;
+NET "RAM_CE1n"  LOC = "U20" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ; 
+NET "RAM_CENn"  LOC = "P18" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ; 
+NET "RAM_CLK"  LOC = "P17" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ; 
+NET "RAM_WEn"  LOC = "R22" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ; 
+NET "RAM_OEn"  LOC = "R21" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ; 
+NET "RAM_LDn"  LOC = "R19" |IOSTANDARD = LVCMOS25  |DRIVE = 8  |SLEW = SLOW ; 
 NET "ser_enable"  LOC = "W11"  ; 
 NET "ser_prbsen"  LOC = "AA3"  ; 
 NET "ser_loopen"  LOC = "Y4"  ;